.. _dump : > **_DUMP_** This command produces an output file from a Mesh Object. Some of the standard graphics packages are supported including AVS, GMV and TECPLOT. See below for full list of file types that can be written. The list is in alphabetic order and describes each valid file_type with syntax and usage. GENERAL SYNTAX: **dump**/file_type/file_name/[cmo_name]/ The dump command is followed by a word indicating file type. Valid file type kewords are: ** gmv, avs, avs2, chad, coord, datex, elem_adj_node, elem_adj_elem, fehm, geofest, geom, gmv, gocad, lagrit, recolor, stl, stor, tecplot, zone, zone_imt, **and** zone_outside** . The file_type is followed by a string to be used as whole or part of file name as described below. SHORT SYNTAX: **dump**/ file_name.[**inp | avs | gmv | lg | lagrit | ts | exo** ] / [cmo_name] For common file types, a short form syntax can be used which skips the file type designation. The file_type is asssumed from the file_name suffix. The following are recognized; AVS (.inp or .avs), Exodus (.exo), GMV (.gmv), LaGriT (.lagrit or .lg), and .ts (gocad). FILE TYPES: **dump** /** avs** /file_name/[cmo_name] /[iopt_points,iopt_elements,iopt_node_attributes,iopt_element_attributes] Output in AVS UCD (Unstructured Cell Data) format. One can turn on or off the output of node coordinates (iopt_points), element connectivity (iopt_elements), node attributes (iopt_node_attributes) and element attributes (iopt_element_attributes). 1 (default) is on, 2 is on but the first column will not include the node number or element number, 0 turns off output of that part of the file. For instance, dump/avs/file.inp/cmo_name/1,1,0,0 will write the node coordinates and element connectivity, but will not write node attributes or element attributes. **Use the =2 option with caution** since the output will really not be AVS format files. This is fine as long as you do not expect read/avs or the AVS graphics program to read the file. For file format specification see [http://help.avs.com/Express/doc/help/refere nce/dvmac/UCD_Form.htm](http://help.avs.com/Express/doc/help/reference/dvmac/U CD_Form.htm) **dump / avs2 / **file_name/[cmo_name]/[iopt_points,iopt_elements,iopt_node_attributes,iopt_element_attributes] This option will output integers as integers instead of floating point. The other avs option converts integers to reals on output. The /avs/ option above outputs all attributes as real numbers. This option is slower but the files are smaller if there are integers in the node or element attributes. **dump**** **/** chad **** **/file_name/[cmo_name]/ Will output a file nodes, faces, and connectivity for tet, hex, pyr, or pri in CHAD format. Writes attributes imt and itp. **dump**** **/** coord**** **/file_name/[cmo_name]/ (See also **dump/fehm** ) Will output a single file with node list x,y,z values and element connectivity list in FEHM format. Files are written in FEHM format and are described [by clicking here for details.](dump/DUMP3.html) The ** coord ** file is one of a set of files written when the **fehm** file type is called. **dump**** **/** datex | simul**** **/file_name/[cmo_name]/ Will output a file with Geometry, Element, Region, Location, and Dataset in DATEX format. **dump / elem_adj_elem **/ file_name/mo_name [_delatt_ | keepatt | attonly] Option: **delatt** - Write adjacency information to an ascii file. Write list of all elements adjacent to each element. File format: elem_number ean_num e1 e2 ... en Option: **keepatt** - write file and add node attribute **ean_num** (number of elements adjacent to each node) Option: **attonly** - do not write file, add node attribute ean_num, a dummy argument is still required in the file_name field **dump / elem_adj_node **/file_name/mo_name Write adjacency information to an ascii file. Write list of all elements adjacent to each node. File format: node_number number_of_adjacent_elem e1 e2 ... en  _place_holder; ** dump / exo** / file_name/ mo_name ** dump / exo** / file_name/ mo_name / psets / eltsets / facesets ** dump / exo** / file_name/ mo_name / psets / eltsets / facesets file1 file2 ... filen ** dump / exodusii ** / file_name/ mo_name ** dump / exodusII ** / file_name/ mo_name Write a mesh object to a file in the Exodus II format. **dump / fehm** / file_name_root / cmo_name / [**_delatt_ | keepatt**] _place_holder; _place_holder; [**keepatt_voronoi | keepatt_median**]  _place_holder; _place_holder;  _place_holder; _place_holder; _place_holder; _place_holder;&n bsp_place_holder;  _place_holder; _place_holder;/ [ **_ascii_ | binary** ] / [**_scalar_ | vector | both | area_scalar | area_vector | area_both**]  _place_holder; _place_holder; _place_holder; _place_holder;&n bsp_place_holder;  _place_holder; _place_holder;/ [**_all_ | graph | coefs | none**] / [**hybrid | _nohybrid_ **] Write out a series of files for the FEHM flow and transport code. The tokens after the cmo name are all optional. The default options will delete the outside node attributes and will not add attributes for the outside voronoi or median areas. The stor file will be written in ASCII format with scalar coefficient values with compression of area coefficient list and indices. [Click here for more details on the files and options.](dump/DUMP3.html) _place_holder; The file_name is used to form the names of the following 7 files: file_name.fehm - coordinates and geometry ( see dump/coord/... command) file_name_material.zone - node imt (material) zone lists ( see dump/zone_imt/... command) file_name_outside.zone - node external boundary zone lists (see dump/zone_outside/... command) file_name_outside_vor.area - node external boundary area lists (see dump/zone_outside/... command) file_name_interface.zone - zone lists for nodes along material interfaces file_name_multi_mat.zone - lists of node pairs connected across material interfaces file_name.stor - FEHM format file giving the voronoi (control volume) associated with each node and the sparce matrix structure **dump / geofest**/file_name Write a file to be read by the [GeoFEST, Geophysical Finite Element Simulation Tool](http://www.openchannelfoundation.org/projects/GeoFEST/) . _place_holder; The output file is ascii. **dump / geom**/file_name will write an ascii file containing the geometry information for the current run. This information includes the region and mregion definitions and surface, names, types and definitions. **dump/gmv**/file-name/[mesh-object]/[**_ascii _**| **binary**] Write a file to be read by the graphics program [GMV](http://laws.lanl.gov/XCM/gmv/GMVHome.html). _place_holder; The defaults are binary and current mesh object.  _place_holder;NOTE: _place_holder; For LaGriT versions dated after October 1999, use  _place_holder; _place_holder; **cmo**/**setatt**//**ipolydat**/**no** _place_holder; _place_holder; to reduce file size. This command will keep the polygon data from being written to GMV files. **dump / gocad **/file_name Write a gocad TSURF file. See [ GOCAD TSURF](http://www.connectflow.com/geovis age/User/Formats/GocadTsurf.html). _place_holder; **dump / lagrit **/file_name/[cmo_name]/ [**ascii **| **binary**] Write a LaGriT restart file that contains geometry and mesh object information. _place_holder; cmo_name can be '**-all-**' in which case all mesh objects are written to the file or it can specify a list of mesh objects to be written. A subsequent **read/lagrit** command will restart the code at the state at which the dump command was issued. The default file type is binary.  _place_holder; **dump / recolor**/file_name This command writes the existing **colormap** to the specified file. _place_holder; (See **[colormap](COLORMAP.html)** command) **dump / stl **/file_name Output in STL, stereo lithography format. This is only supported for triangle mesh objects. **dump / stor** / file_name_root / cmo_name / [ **_ascii_ | binary** ] /  _place_holder; _place_holder; _place_holder; _place_holder;&n bsp_place_holder;  _place_holder; _place_holder;/ [**_scalar_ | vector | both | area_scalar | area_vector | area_both**]  _place_holder; _place_holder; _place_holder; _place_holder;&n bsp_place_holder;  _place_holder; _place_holder;/ [**_all_ | graph | coefs | none**] / [**hybrid | _nohybrid_ **] Same syntax as **dump/fehm** except the only output is the FEHM sparse matrix coefficient STOR file file_name.stor. File can be written in ascii or binary (fortran unformatted platform dependent). The area coefficient values can be written as scalar or vector. The compression default is all which will compress both the list of area coefficients and the indices. The coefs compression, or none compression both use and older algorithm and will result in larger files and may take longer to run. The ** stor ** file is one of a set of files written when the **fehm** file type is called. [Click here for further explanation of options.](dump/DUMP3.html) [Click here for the STOR file format.](../STOR_Form.html) **dump / tecplot **/file_name Write a file to be read by the Tecplot graphics package. _place_holder; The output file is ascii. Only node attributes are output, element attributes are ignored and not output. Tecplot does not support prism or pyramid element types so they are written as eight node, degenerate hex elements. The ioflag parameter is used to control if the node attributes are output or not is the AVS ioflag. The expected suffix for the file name is '.plt'. If a name is given without the .plt suffix, a suffix, .plt is added. Output is ascii. This output format does not support output of a mesh with nodes but zero elements. If there are zero elements, a header is written but node coordinate information is not output. **dump** / **zone** /file_name/[cmo_name] / [**_delatt_ | keepatt**] _place_holder; _place_holder; [**_keepatt_voronoi_ | keepatt_median**] Write out a set of fehm format zone files for the mesh object nodes. These include zones for mesh materials and the external faces of the mesh as described below. The **keepatt** option will keep node attributes that tag nodes on external mesh boundaries (see zone_outside). The **delatt** option will delete the outside attributes if they exist (the are removed by default). The area attributes for outside nodes can be created with the **keepatt_voronoi** or **keepatt_median** options (see zone_outside). Files are written in FEHM format and are described in the dump/fehm command [by clicking here for details.](dump/DUMP3.html) The file_name is used to create names for the following 5 files: file_name_material.zone - node imt (material) zone lists ( see dump/zone_imt/... command) file_name_outside.zone - node external boundary zone lists (see dump/zone_outside/... command) file_name_outside_vor.area or file_name_outside_med.area - node external boundary area lists (see dump/zone_outside/... command) file_name_interface.zone - zone lists for nodes along material interfaces, 0 length file if mesh is single material file_name_multi_mat.zone - lists of node pairs connected across material interfaces, 0 length file if mesh is single material **dump** / **zone_imt** /file_name/[cmo_name] / [ imt_value ] _place_holder; _place_holder; Will output only one file with name file_name_material.zone. It is written in FEHM zone format and are described [by clicking here for details.](dump/DUMP3.html) file_name_**material**.**zone** is node list for each integer material (imt) value. If the optional fifth argument is specified as an integer, then a node list file is written only listing the nodes with the value specified by imt_value. ([For options to output PSET's as ZONE/ZONN files see: pset/zone](PSET.html)) The ** zone_imt ** file is one of a set of files written when the **fehm** file type is called. **dump** / **zone_outside** | **zone_outside_minmax** /file_name/[cmo_name] /  _place_holder; _place_holder; _place_holder; _place_holder; [**_delatt_ | keepatt**] _place_holder; [**_keepatt_voronoi_ | keepatt_median**] Write fehm zone format files that list the outside node list and the associated outside area list. There are two files written: 1. file_name_outside.zone is a node list for each of 6 possible external boundaries. If keepatt is specified, then 6 node based attributes are added to the mesh object with the names top, bottom, left_w, right_e, back_n, and front_s. A node can occur in multiple zones. For instance, a node located on a top corner of the mesh can be found in zones for top, front_s, and left_w. 1 = top = top = positive z direction (0,0,1) 2 = bottom = bottom = negative z direction (0,0,-1) 3 = left_w = left or west = negative x direction (-1,0,0) 4 = front_s = front or south = negative y direction (0,-1,0) 5 = right_e = right or east = positive x direction (1,0,0) 6 = back_n = back or north = positive y direction (0,1,0) 2. file_name_outside_vor.area is a list of Voronoi area vectors (Ax_i,Ay_i,Az_i) associated with each external node. It is written to match the node lists as written in the outside.zone file. Along with each outside zone tag (such as top), there is a sum of each vector for that zone. For applications such as infiltration, the z component (each 3rd value) would be used from the top zone list. 00001 top Sum VORONOI vectors: 0.5000000E+00 0.5000000E+00 0.5000000E+00 nnum 3 -2.500000000000E-01 -2.500000000000E-01 2.500000000000E-01 2.500000000000E-01 0.000000000000E+00 1.250000000000E-01 0.000000000000E+00 2.500000000000E-01 1.250000000000E-01 If the keyword keepatt_voronoi is specified, three node attributes (xn_varea, yn_varea, zn_varea) representing the voronoi area are added. If the keyword keepatt_median is specified, three node attributes (xn_marea, yn_marea, zn_marea) representing the median area are added and the file name will be file_name_outside_med.area. Note that the old version file name file_name_outside.area has area vectors computed with the median strategy. The option **zone_outside_minmax** is used to find the min and max external node along each row and column of the regular grid. [Click here for image ](../../images/zone_outside.png) showing difference between the default and the minmax options for outside nodes. These **zone_outside** files are part of a set of files written when the **zone** or **fehm** file type is called. The fehm zone format and descriptions are _place_holder; [in the **dump/fehm** command details.](dump/DUMP3.html) EXAMPLES: **dump **/ gmv /file_name.gmv/cmo_name/ **dump **/ gmv /file_name.gmv/cmo_name/ascii **dump **/ file_name.gmv / cmo_name **dump **/ tecplot /file_name.plt/cmo_name **dump **/ lagrit /file_name.lg/-all-/binary **dump**/file_name.inp/cmo_name **dump** / avs /file_name.inp/cmo_name **dump **/ avs /file_name.inp/cmo_name/1 0 0 0 (output only node coordinates) **dump **/ avs /file_name.inp/cmo_name/1 1 0 0 (output node coordinates and element connectivity) **dump **/ avs /file_name.inp/cmo_name/0 0 0 1 (output element attributes) **dump** / avs /file_name.inp/cmo_name/0 0 2 2 (output node and element attributes without node numbers as first column of output) **dump** / avs2 /file_name.inp/cmo_name/1 1 1 0 (output node coordinates, element connectivity and node attributes) **dump** / fehm /file_root/cmo_name/ (write ascii compressed STOR file and full set of fehm input files) **dump** / stor /file_root/cmo_name/ (write ascii compressed STOR file) **dump** / stor /file_root/cmo_name/ binary (write unformatted compressed STOR file - platform dependent) **dump **/ stor /file_name/cmo_name/ascii/area_scalar **dump** / zone_outside /file_root/cmo_name/keepatt (write outside node zones and voronoi areas, keep outside attributes) **dump** / zone_outside /file_root/cmo_name/keepatt_voronoi (write outside node zones and keep Voronoi area attributes) **dump** / zone_outside_minmax /file_root/cmo_name (write outside nodes at minmax extent of each column) **dump** / zone /file_root/cmo_name/ delatt keepatt_voronoi (write all FEHM zone and area files, delete the outside attributes and keep the voronoi area attributes) **dump**/ exo / file_name / cmo_name Write generic exodus output without any sets. **dump**/ exo / file_name / cmo_name / psets Write exodus output with point sets only. **dump**/ exo / file_name / cmo_name / / eltsets Write exodus output with element sets only. **dump**/ exo / file_name / cmo_name / / / facesets Write exodus output with face sets only. The facesets are internally calculated and defined. Note that the algorithm is computationally expensive and can take a long time to finish. **dump**/ exo / file_name / cmo_name / / / facesets file1,file2,...,filen Write exodus output with face sets only. The face sets are imported from file1, file2, ..., filen. **dump**/ exo / file_name / cmo_name / psets / eltsets / facesets file1,file2,...,filen Write exodus output with all psets, element sets, and face sets. The face sets are imported from file1, file2, ..., filen. [Click here for demos](../main_dump.html)