* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Program: LaGriT V3.330 Linux * * * date_compile: 2021/10/15 test * * * Run Time: 2021/Nov 8 16:59:39 * * * Manual: http://lagrit.lanl.gov * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -----oOo----- LaGriT V3 LA-CC-15-069 https://github.com/lanl/LaGriT Copyright 2016. Triad National Security, LLC. All rights reserved. This program was produced under U.S. Government contract 89233218CNA000001 for Los Alamos National Laboratory (LANL), which is operated by Triad National Security, LLC for the U.S. Department of Energy/National Nuclear Security Administration. All rights in the program are reserved by Triad National Security, LLC, and the U.S. Department of Energy/National Nuclear Security Administration. The Government is granted for itself and others acting on its behalf a nonexclusive, paid-up, irrevocable worldwide license in this material to reproduce, prepare derivative works, distribute copies to the public, perform publicly and display publicly, and to permit others to do so. This software is open source and available under the BSD-3 License. -----oOo----- Output log file: outx3dgen Command log file: logx3dgen # TEST QUALITY # test quality reports based on tets at # https://lanl.github.io/LaGriT/pages/docs/QUALITY_sliver_cap_needle_wedge.html # does not include taylor or quad located in other test directories # ------------------------------------- # EQUILATERAL define MO_NAME mo_equal read input_tet_equilateral.inp MO_NAME read/avs/input_tet_equilateral.inp/mo_equal geniee finish cmo/status/brief The current-mesh-object(CMO) is: mo_equal 1 Mesh Object name: mo_equal number of nodes = 4 number of elements = 1 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = active finish finish infile input_quality.mlgi * ******************************************** * Aspect Ratio quality/aspect/y cmo/addatt//aratio/VDOUBLE/scalar/nelements finish epsilonl, epsilonaspect: 3.8459254E-13 5.6885628E-38 -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 0 elements with aspect ratio b/w .1 and .2 : 0 elements with aspect ratio b/w .2 and .5 : 0 elements with aspect ratio b/w .5 and 1. : 1 min aspect ratio = 0.1000E+01 max aspect ratio = 0.1000E+01 ----------------------------------------------------------- 1 total elements evaluated. * Minimum Dihedral Angle, (degree) cmo/addatt/MO_NAME/ang_mind/a_mind ADDATT/ang_mind: creating new attribute: a_mind * Maximum Dihedral Angle, (degree) cmo/addatt/MO_NAME/ang_maxd/a_maxd ADDATT/ang_maxd: creating new attribute: a_maxd * Maximum Solid Angle, (degree) cmo/addatt/MO_NAME/ang_maxd_solid/s_maxd ADDATT/ang_maxd_solid: creating new attribute: s_maxd * Minimum Solid Angle, (degree) cmo/addatt/MO_NAME/ang_mind_solid/s_mind ADDATT/ang_mind_solid: creating new attribute: s_mind * ( min edge length ) / ( max edge length ) quality/edge_ratio/y cmo/addatt//eratio/VDOUBLE/scalar/nelements finish epsilonl, epsilonaspect: 3.8459254E-13 5.6885628E-38 -------------------------------------------- elements with min/max edge ratio < .01: 0 elements with min/max edge ratio b/w .01 and .02: 0 elements with min/max edge ratio b/w .02 and .05: 0 elements with min/max edge ratio b/w .05 and .1 : 0 elements with min/max edge ratio b/w .1 and .2 : 0 elements with min/max edge ratio b/w .2 and .5 : 0 elements with min/max edge ratio b/w .5 and 1. : 1 min edge ratio = 0.1000E+01 max edge ratio = 0.1000E+01 ----------------------------------------------------------- 1 total elements evaluated. ******************************************** * Minimum Dihedral Angle, (radian) cmo/addatt/MO_NAME/ang_minr/a_minr ADDATT/ang_minr: creating new attribute: a_minr * Maximum Dihedral Angle, (radian) cmo/addatt/MO_NAME/ang_maxr/a_maxr ADDATT/ang_maxr: creating new attribute: a_maxr * Minimum Solid Angle, (radian) cmo/addatt/MO_NAME/ang_minr_solid/s_minr ADDATT/ang_minr_solid: creating new attribute: s_minr * Maximum Solid Angle, (radian) cmo/addatt/MO_NAME/ang_maxr_solid/s_maxr ADDATT/ang_maxr_solid: creating new attribute: s_maxr * Edge length minimum quality/edge_min/y cmo/addatt//edgemin/VDOUBLE/scalar/nelements finish epsilonl, epsilonaspect: 3.8459254E-13 5.6885628E-38 -------------------------------------------- Edge min normalized by dividing with max value. element norm min edge length < .01: 0 element norm edge length b/w .01 and .02: 0 element norm edge length b/w .02 and .05: 0 element norm edge length b/w .05 and .1 : 0 element norm edge length b/w .1 and .2 : 0 element norm edge length b/w .2 and .5 : 0 element norm edge length b/w .5 and 1. : 1 min min edge length = 0.1414E+01 max min edge length = 0.1414E+01 ----------------------------------------------------------- 1 total elements evaluated. * Edge length maximum quality/edge_max/y cmo/addatt//edgemax/VDOUBLE/scalar/nelements finish epsilonl, epsilonaspect: 3.8459254E-13 5.6885628E-38 -------------------------------------------- Edge max normalized by dividing with max value. element norm max edge length < .01: 0 element norm edge length b/w .01 and .02: 0 element norm edge length b/w .02 and .05: 0 element norm edge length b/w .05 and .1 : 0 element norm edge length b/w .1 and .2 : 0 element norm edge length b/w .2 and .5 : 0 element norm edge length b/w .5 and 1. : 1 min max edge length = 0.1414E+01 max max edge length = 0.1414E+01 ----------------------------------------------------------- 1 total elements evaluated. * volume quality/volume epsilonvol: 2.2204460E-13 --------------------------------------- All elements have volume 3.3333333E-01 ----------------------------------------------------------- 1 total elements evaluated. * quality epsilonl, epsilonaspect: 3.8459254E-13 5.6885628E-38 -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 0 elements with aspect ratio b/w .1 and .2 : 0 elements with aspect ratio b/w .2 and .5 : 0 elements with aspect ratio b/w .5 and 1. : 1 min aspect ratio = 0.1000E+01 max aspect ratio = 0.1000E+01 epsilonvol: 2.2204460E-13 --------------------------------------- All elements have volume 3.3333333E-01 ----------------------------------------------------------- 1 total elements evaluated. * quality/angle/lt 20. ------------------------------------------ elements with angles < 20.000: 0 min angle = 70.529 max angle = 70.529 ----------------------------------------------------------- 1 total elements evaluated. quality/angle/gt 90. ------------------------------------------ elements with angles > 90.000: 0 min angle = 70.529 max angle = 70.529 ----------------------------------------------------------- 1 total elements evaluated. finish cmo printatt MO_NAME -all- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 4 scalar 1 1 0 1 vector 3 3 0 1 nnodes 4 4 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 1 1 0 1 mbndry 16000000 16000000 0 1 ndimensions_topo 3 3 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 4 4 0 1 edges_per_element 6 6 0 1 faces_per_element 4 4 0 1 isetwd 0 0 0 4 ialias 0 0 0 4 imt1 1 1 0 4 itp1 10 10 0 4 icr1 0 0 0 4 isn1 0 0 0 4 xic 0.000000000E+00 1.000000000E+00 1.000000000E+00 4 yic 0.000000000E+00 1.000000000E+00 1.000000000E+00 4 zic 0.000000000E+00 1.000000000E+00 1.000000000E+00 4 xtetwd 0 0 0 1 itetclr 1 1 0 1 itettyp 5 5 0 1 itetoff 0 0 0 1 jtetoff 0 0 0 1 itet 1 4 3 1x4 jtet 16000000 16000000 0 1x4 epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 3.845925373E-13 3.845925373E-13 0.000000000E+00 1 epsilona 6.661338148E-13 6.661338148E-13 0.000000000E+00 1 epsilonv 2.220446049E-13 2.220446049E-13 0.000000000E+00 1 ipointi 1 1 0 1 ipointj 4 4 0 1 idebug 0 0 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin 0.000000000E+00 0.000000000E+00 0.000000000E+00 1 ymin 0.000000000E+00 0.000000000E+00 0.000000000E+00 1 zmin 0.000000000E+00 0.000000000E+00 0.000000000E+00 1 xmax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 ymax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 zmax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 0 0 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 aratio 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 a_mind 7.052877937E+01 7.052877937E+01 0.000000000E+00 1 a_maxd 7.052877937E+01 7.052877937E+01 0.000000000E+00 1 s_maxd 3.158633810E+01 3.158633810E+01 0.000000000E+00 1 s_mind 3.158633810E+01 3.158633810E+01 0.000000000E+00 1 eratio 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 a_minr 1.230959417E+00 1.230959417E+00 0.000000000E+00 1 a_maxr 1.230959417E+00 1.230959417E+00 0.000000000E+00 1 s_minr 5.512855984E-01 5.512855984E-01 0.000000000E+00 1 s_maxr 5.512855984E-01 5.512855984E-01 0.000000000E+00 1 edgemin 1.414213562E+00 1.414213562E+00 0.000000000E+00 1 edgemax 1.414213562E+00 1.414213562E+00 0.000000000E+00 1 # aratio = 1. # a_mind = 7.05288E+01 # a_maxd = 7.05288E+01 # s_mind = 3.15863E+01 # eratio = 1.0 # ------------------------------------- # SLIVER define MO_NAME mo_sliver read input_tet_sliver.inp MO_NAME read/avs/input_tet_sliver.inp/mo_sliver geniee finish cmo/status/brief The current-mesh-object(CMO) is: mo_sliver 1 Mesh Object name: mo_equal number of nodes = 4 number of elements = 1 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = inactive 2 Mesh Object name: mo_sliver number of nodes = 4 number of elements = 1 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = active finish finish infile input_quality.mlgi * ******************************************** * Aspect Ratio quality/aspect/y cmo/addatt//aratio/VDOUBLE/scalar/nelements finish epsilonl, epsilonaspect: 6.2960512E-13 2.4957711E-37 -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 0 elements with aspect ratio b/w .1 and .2 : 0 elements with aspect ratio b/w .2 and .5 : 1 elements with aspect ratio b/w .5 and 1. : 0 min aspect ratio = 0.2927E+00 max aspect ratio = 0.2927E+00 ----------------------------------------------------------- 1 total elements evaluated. * Minimum Dihedral Angle, (degree) cmo/addatt/MO_NAME/ang_mind/a_mind ADDATT/ang_mind: creating new attribute: a_mind * Maximum Dihedral Angle, (degree) cmo/addatt/MO_NAME/ang_maxd/a_maxd ADDATT/ang_maxd: creating new attribute: a_maxd * Maximum Solid Angle, (degree) cmo/addatt/MO_NAME/ang_maxd_solid/s_maxd ADDATT/ang_maxd_solid: creating new attribute: s_maxd * Minimum Solid Angle, (degree) cmo/addatt/MO_NAME/ang_mind_solid/s_mind ADDATT/ang_mind_solid: creating new attribute: s_mind * ( min edge length ) / ( max edge length ) quality/edge_ratio/y cmo/addatt//eratio/VDOUBLE/scalar/nelements finish epsilonl, epsilonaspect: 6.2960512E-13 2.4957711E-37 -------------------------------------------- elements with min/max edge ratio < .01: 0 elements with min/max edge ratio b/w .01 and .02: 0 elements with min/max edge ratio b/w .02 and .05: 0 elements with min/max edge ratio b/w .05 and .1 : 0 elements with min/max edge ratio b/w .1 and .2 : 0 elements with min/max edge ratio b/w .2 and .5 : 0 elements with min/max edge ratio b/w .5 and 1. : 1 min edge ratio = 0.7141E+00 max edge ratio = 0.7141E+00 ----------------------------------------------------------- 1 total elements evaluated. ******************************************** * Minimum Dihedral Angle, (radian) cmo/addatt/MO_NAME/ang_minr/a_minr ADDATT/ang_minr: creating new attribute: a_minr * Maximum Dihedral Angle, (radian) cmo/addatt/MO_NAME/ang_maxr/a_maxr ADDATT/ang_maxr: creating new attribute: a_maxr * Minimum Solid Angle, (radian) cmo/addatt/MO_NAME/ang_minr_solid/s_minr ADDATT/ang_minr_solid: creating new attribute: s_minr * Maximum Solid Angle, (radian) cmo/addatt/MO_NAME/ang_maxr_solid/s_maxr ADDATT/ang_maxr_solid: creating new attribute: s_maxr * Edge length minimum quality/edge_min/y cmo/addatt//edgemin/VDOUBLE/scalar/nelements finish epsilonl, epsilonaspect: 6.2960512E-13 2.4957711E-37 -------------------------------------------- Edge min normalized by dividing with max value. element norm min edge length < .01: 0 element norm edge length b/w .01 and .02: 0 element norm edge length b/w .02 and .05: 0 element norm edge length b/w .05 and .1 : 0 element norm edge length b/w .1 and .2 : 0 element norm edge length b/w .2 and .5 : 0 element norm edge length b/w .5 and 1. : 1 min min edge length = 0.1428E+01 max min edge length = 0.1428E+01 ----------------------------------------------------------- 1 total elements evaluated. * Edge length maximum quality/edge_max/y cmo/addatt//edgemax/VDOUBLE/scalar/nelements finish epsilonl, epsilonaspect: 6.2960512E-13 2.4957711E-37 -------------------------------------------- Edge max normalized by dividing with max value. element norm max edge length < .01: 0 element norm edge length b/w .01 and .02: 0 element norm edge length b/w .02 and .05: 0 element norm edge length b/w .05 and .1 : 0 element norm edge length b/w .1 and .2 : 0 element norm edge length b/w .2 and .5 : 0 element norm edge length b/w .5 and 1. : 1 min max edge length = 0.2000E+01 max max edge length = 0.2000E+01 ----------------------------------------------------------- 1 total elements evaluated. * volume quality/volume epsilonvol: 1.7763568E-13 --------------------------------------- All elements have volume 1.3333333E-01 ----------------------------------------------------------- 1 total elements evaluated. * quality epsilonl, epsilonaspect: 6.2960512E-13 2.4957711E-37 -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 0 elements with aspect ratio b/w .1 and .2 : 0 elements with aspect ratio b/w .2 and .5 : 1 elements with aspect ratio b/w .5 and 1. : 0 min aspect ratio = 0.2927E+00 max aspect ratio = 0.2927E+00 epsilonvol: 1.7763568E-13 --------------------------------------- All elements have volume 1.3333333E-01 ----------------------------------------------------------- 1 total elements evaluated. * quality/angle/lt 20. ------------------------------------------ elements with angles < 20.000: 1 tets with angles < 20.000: 1 min angle = 15.942 max angle = 157.380 ----------------------------------------------------------- 1 total elements evaluated. quality/angle/gt 90. ------------------------------------------ elements with angles > 90.000: 1 tets with angles > 90.000: 1 min angle = 15.942 max angle = 157.380 ----------------------------------------------------------- 1 total elements evaluated. finish cmo printatt MO_NAME -all- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 4 scalar 1 1 0 1 vector 3 3 0 1 nnodes 4 4 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 1 1 0 1 mbndry 16000000 16000000 0 1 ndimensions_topo 3 3 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 4 4 0 1 edges_per_element 6 6 0 1 faces_per_element 4 4 0 1 isetwd 0 0 0 4 ialias 0 0 0 4 imt1 1 1 0 4 itp1 10 10 0 4 icr1 0 0 0 4 isn1 0 0 0 4 xic -1.000000000E+00 1.000000000E+00 2.000000000E+00 4 yic -1.000000000E+00 1.000000000E+00 2.000000000E+00 4 zic -1.000000000E-01 1.000000000E-01 2.000000000E-01 4 xtetwd 0 0 0 1 itetclr 1 1 0 1 itettyp 5 5 0 1 itetoff 0 0 0 1 jtetoff 0 0 0 1 itet 1 4 3 1x4 jtet 16000000 16000000 0 1x4 epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 6.296051182E-13 6.296051182E-13 0.000000000E+00 1 epsilona 1.785238624E-12 1.785238624E-12 0.000000000E+00 1 epsilonv 1.776356839E-13 1.776356839E-13 0.000000000E+00 1 ipointi 1 1 0 1 ipointj 4 4 0 1 idebug 0 0 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 ymin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 zmin -1.000000000E-01 -1.000000000E-01 0.000000000E+00 1 xmax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 ymax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 zmax 1.000000000E-01 1.000000000E-01 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 0 0 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 aratio 2.927142721E-01 2.927142721E-01 0.000000000E+00 1 a_mind 1.594236861E+01 1.594236861E+01 0.000000000E+00 1 a_maxd 1.573801351E+02 1.573801351E+02 0.000000000E+00 1 s_maxd 9.264872264E+00 9.264872264E+00 0.000000000E+00 1 s_mind 9.264872264E+00 9.264872264E+00 0.000000000E+00 1 eratio 7.141428429E-01 7.141428429E-01 0.000000000E+00 1 a_minr 2.782468227E-01 2.782468227E-01 0.000000000E+00 1 a_maxr 2.746801534E+00 2.746801534E+00 0.000000000E+00 1 s_minr 1.617025258E-01 1.617025258E-01 0.000000000E+00 1 s_maxr 1.617025258E-01 1.617025258E-01 0.000000000E+00 1 edgemin 1.428285686E+00 1.428285686E+00 0.000000000E+00 1 edgemax 2.000000000E+00 2.000000000E+00 0.000000000E+00 1 # aratio = 0.2927 # a_mind = 1.59424E+01 # a_maxd = 1.57380E+02 # s_mind = 9.26487E+00 # eratio = 7.14143E-01 # ------------------------------------- # CAP define MO_NAME mo_cap read input_tet_cap.inp mo_cap read/avs/input_tet_cap.inp/mo_cap geniee finish cmo/status/brief The current-mesh-object(CMO) is: mo_cap 1 Mesh Object name: mo_equal number of nodes = 4 number of elements = 1 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = inactive 2 Mesh Object name: mo_sliver number of nodes = 4 number of elements = 1 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = inactive 3 Mesh Object name: mo_cap number of nodes = 4 number of elements = 1 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = active finish finish infile input_quality.mlgi * ******************************************** * Aspect Ratio quality/aspect/y cmo/addatt//aratio/VDOUBLE/scalar/nelements finish epsilonl, epsilonaspect: 3.1480256E-13 3.1197139E-38 -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 1 elements with aspect ratio b/w .1 and .2 : 0 elements with aspect ratio b/w .2 and .5 : 0 elements with aspect ratio b/w .5 and 1. : 0 min aspect ratio = 0.7448E-01 max aspect ratio = 0.7448E-01 ----------------------------------------------------------- 1 total elements evaluated. * Minimum Dihedral Angle, (degree) cmo/addatt/MO_NAME/ang_mind/a_mind ADDATT/ang_mind: creating new attribute: a_mind * Maximum Dihedral Angle, (degree) cmo/addatt/MO_NAME/ang_maxd/a_maxd ADDATT/ang_maxd: creating new attribute: a_maxd * Maximum Solid Angle, (degree) cmo/addatt/MO_NAME/ang_maxd_solid/s_maxd ADDATT/ang_maxd_solid: creating new attribute: s_maxd * Minimum Solid Angle, (degree) cmo/addatt/MO_NAME/ang_mind_solid/s_mind ADDATT/ang_mind_solid: creating new attribute: s_mind * ( min edge length ) / ( max edge length ) quality/edge_ratio/y cmo/addatt//eratio/VDOUBLE/scalar/nelements finish epsilonl, epsilonaspect: 3.1480256E-13 3.1197139E-38 -------------------------------------------- elements with min/max edge ratio < .01: 0 elements with min/max edge ratio b/w .01 and .02: 0 elements with min/max edge ratio b/w .02 and .05: 0 elements with min/max edge ratio b/w .05 and .1 : 0 elements with min/max edge ratio b/w .1 and .2 : 0 elements with min/max edge ratio b/w .2 and .5 : 1 elements with min/max edge ratio b/w .5 and 1. : 0 min edge ratio = 0.2598E+00 max edge ratio = 0.2598E+00 ----------------------------------------------------------- 1 total elements evaluated. ******************************************** * Minimum Dihedral Angle, (radian) cmo/addatt/MO_NAME/ang_minr/a_minr ADDATT/ang_minr: creating new attribute: a_minr * Maximum Dihedral Angle, (radian) cmo/addatt/MO_NAME/ang_maxr/a_maxr ADDATT/ang_maxr: creating new attribute: a_maxr * Minimum Solid Angle, (radian) cmo/addatt/MO_NAME/ang_minr_solid/s_minr ADDATT/ang_minr_solid: creating new attribute: s_minr * Maximum Solid Angle, (radian) cmo/addatt/MO_NAME/ang_maxr_solid/s_maxr ADDATT/ang_maxr_solid: creating new attribute: s_maxr * Edge length minimum quality/edge_min/y cmo/addatt//edgemin/VDOUBLE/scalar/nelements finish epsilonl, epsilonaspect: 3.1480256E-13 3.1197139E-38 -------------------------------------------- Edge min normalized by dividing with max value. element norm min edge length < .01: 0 element norm edge length b/w .01 and .02: 0 element norm edge length b/w .02 and .05: 0 element norm edge length b/w .05 and .1 : 0 element norm edge length b/w .1 and .2 : 0 element norm edge length b/w .2 and .5 : 0 element norm edge length b/w .5 and 1. : 1 min min edge length = 0.3674E+00 max min edge length = 0.3674E+00 ----------------------------------------------------------- 1 total elements evaluated. * Edge length maximum quality/edge_max/y cmo/addatt//edgemax/VDOUBLE/scalar/nelements finish epsilonl, epsilonaspect: 3.1480256E-13 3.1197139E-38 -------------------------------------------- Edge max normalized by dividing with max value. element norm max edge length < .01: 0 element norm edge length b/w .01 and .02: 0 element norm edge length b/w .02 and .05: 0 element norm edge length b/w .05 and .1 : 0 element norm edge length b/w .1 and .2 : 0 element norm edge length b/w .2 and .5 : 0 element norm edge length b/w .5 and 1. : 1 min max edge length = 0.1414E+01 max max edge length = 0.1414E+01 ----------------------------------------------------------- 1 total elements evaluated. * volume quality/volume epsilonvol: 2.2204460E-14 --------------------------------------- All elements have volume -1.6666667E-02 ----------------------------------------------------------- 1 total elements evaluated. * quality epsilonl, epsilonaspect: 3.1480256E-13 3.1197139E-38 -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 1 elements with aspect ratio b/w .1 and .2 : 0 elements with aspect ratio b/w .2 and .5 : 0 elements with aspect ratio b/w .5 and 1. : 0 min aspect ratio = 0.7448E-01 max aspect ratio = 0.7448E-01 epsilonvol: 2.2204460E-14 --------------------------------------- All elements have volume -1.6666667E-02 ----------------------------------------------------------- 1 total elements evaluated. * quality/angle/lt 20. ------------------------------------------ elements with angles < 20.000: 1 tets with angles < 20.000: 1 min angle = 15.793 max angle = 149.550 ----------------------------------------------------------- 1 total elements evaluated. quality/angle/gt 90. ------------------------------------------ elements with angles > 90.000: 1 tets with angles > 90.000: 1 min angle = 15.793 max angle = 149.550 ----------------------------------------------------------- 1 total elements evaluated. finish cmo printatt MO_NAME -all- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 4 scalar 1 1 0 1 vector 3 3 0 1 nnodes 4 4 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 1 1 0 1 mbndry 16000000 16000000 0 1 ndimensions_topo 3 3 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 4 4 0 1 edges_per_element 6 6 0 1 faces_per_element 4 4 0 1 isetwd 0 0 0 4 ialias 0 0 0 4 imt1 1 1 0 4 itp1 10 10 0 4 icr1 0 0 0 4 isn1 0 0 0 4 xic 0.000000000E+00 1.000000000E+00 1.000000000E+00 4 yic 0.000000000E+00 1.000000000E+00 1.000000000E+00 4 zic 0.000000000E+00 1.000000000E-01 1.000000000E-01 4 xtetwd 0 0 0 1 itetclr 1 1 0 1 itettyp 5 5 0 1 itetoff 0 0 0 1 jtetoff 0 0 0 1 itet 1 4 3 1x4 jtet 16000000 16000000 0 1x4 epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 3.148025591E-13 3.148025591E-13 0.000000000E+00 1 epsilona 4.463096559E-13 4.463096559E-13 0.000000000E+00 1 epsilonv 2.220446049E-14 2.220446049E-14 0.000000000E+00 1 ipointi 1 1 0 1 ipointj 4 4 0 1 idebug 0 0 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin 0.000000000E+00 0.000000000E+00 0.000000000E+00 1 ymin 0.000000000E+00 0.000000000E+00 0.000000000E+00 1 zmin 0.000000000E+00 0.000000000E+00 0.000000000E+00 1 xmax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 ymax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 zmax 1.000000000E-01 1.000000000E-01 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 0 0 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 aratio 7.447547275E-02 7.447547275E-02 0.000000000E+00 1 a_mind 1.579316905E+01 1.579316905E+01 0.000000000E+00 1 a_maxd 1.495496860E+02 1.495496860E+02 0.000000000E+00 1 s_maxd 2.601112288E+02 2.601112288E+02 0.000000000E+00 1 s_mind 2.875349956E+00 2.875349956E+00 0.000000000E+00 1 eratio 2.598076211E-01 2.598076211E-01 0.000000000E+00 1 a_minr 2.756427992E-01 2.756427992E-01 0.000000000E+00 1 a_maxr 2.610134416E+00 2.610134416E+00 0.000000000E+00 1 s_minr 5.018432387E-02 5.018432387E-02 0.000000000E+00 1 s_maxr 4.539797364E+00 4.539797364E+00 0.000000000E+00 1 edgemin 3.674234614E-01 3.674234614E-01 0.000000000E+00 1 edgemax 1.414213562E+00 1.414213562E+00 0.000000000E+00 1 # aratio = 0.07447 # a_mind = 1.57931E+01 # a_maxd = 1.49549E+02 # s_mind = 2.60111E+02 # eratio = 2.59807E-01 # ------------------------------------- # NEEDLE define MO_NAME mo_needle read input_tet_needle.inp MO_NAME read/avs/input_tet_needle.inp/mo_needle geniee finish cmo/status/brief The current-mesh-object(CMO) is: mo_needle 1 Mesh Object name: mo_equal number of nodes = 4 number of elements = 1 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = inactive 2 Mesh Object name: mo_sliver number of nodes = 4 number of elements = 1 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = inactive 3 Mesh Object name: mo_cap number of nodes = 4 number of elements = 1 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = inactive 4 Mesh Object name: mo_needle number of nodes = 4 number of elements = 1 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = active finish finish infile input_quality.mlgi * ******************************************** * Aspect Ratio quality/aspect/y cmo/addatt//aratio/VDOUBLE/scalar/nelements finish epsilonl, epsilonaspect: 2.3075552E-13 1.2287296E-38 -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 0 elements with aspect ratio b/w .1 and .2 : 0 elements with aspect ratio b/w .2 and .5 : 1 elements with aspect ratio b/w .5 and 1. : 0 min aspect ratio = 0.3429E+00 max aspect ratio = 0.3429E+00 ----------------------------------------------------------- 1 total elements evaluated. * Minimum Dihedral Angle, (degree) cmo/addatt/MO_NAME/ang_mind/a_mind ADDATT/ang_mind: creating new attribute: a_mind * Maximum Dihedral Angle, (degree) cmo/addatt/MO_NAME/ang_maxd/a_maxd ADDATT/ang_maxd: creating new attribute: a_maxd * Maximum Solid Angle, (degree) cmo/addatt/MO_NAME/ang_maxd_solid/s_maxd ADDATT/ang_maxd_solid: creating new attribute: s_maxd * Minimum Solid Angle, (degree) cmo/addatt/MO_NAME/ang_mind_solid/s_mind ADDATT/ang_mind_solid: creating new attribute: s_mind * ( min edge length ) / ( max edge length ) quality/edge_ratio/y cmo/addatt//eratio/VDOUBLE/scalar/nelements finish epsilonl, epsilonaspect: 2.3075552E-13 1.2287296E-38 -------------------------------------------- elements with min/max edge ratio < .01: 0 elements with min/max edge ratio b/w .01 and .02: 0 elements with min/max edge ratio b/w .02 and .05: 0 elements with min/max edge ratio b/w .05 and .1 : 0 elements with min/max edge ratio b/w .1 and .2 : 1 elements with min/max edge ratio b/w .2 and .5 : 0 elements with min/max edge ratio b/w .5 and 1. : 0 min edge ratio = 0.1980E+00 max edge ratio = 0.1980E+00 ----------------------------------------------------------- 1 total elements evaluated. ******************************************** * Minimum Dihedral Angle, (radian) cmo/addatt/MO_NAME/ang_minr/a_minr ADDATT/ang_minr: creating new attribute: a_minr * Maximum Dihedral Angle, (radian) cmo/addatt/MO_NAME/ang_maxr/a_maxr ADDATT/ang_maxr: creating new attribute: a_maxr * Minimum Solid Angle, (radian) cmo/addatt/MO_NAME/ang_minr_solid/s_minr ADDATT/ang_minr_solid: creating new attribute: s_minr * Maximum Solid Angle, (radian) cmo/addatt/MO_NAME/ang_maxr_solid/s_maxr ADDATT/ang_maxr_solid: creating new attribute: s_maxr * Edge length minimum quality/edge_min/y cmo/addatt//edgemin/VDOUBLE/scalar/nelements finish epsilonl, epsilonaspect: 2.3075552E-13 1.2287296E-38 -------------------------------------------- Edge min normalized by dividing with max value. element norm min edge length < .01: 0 element norm edge length b/w .01 and .02: 0 element norm edge length b/w .02 and .05: 0 element norm edge length b/w .05 and .1 : 0 element norm edge length b/w .1 and .2 : 0 element norm edge length b/w .2 and .5 : 0 element norm edge length b/w .5 and 1. : 1 min min edge length = 0.2000E+00 max min edge length = 0.2000E+00 ----------------------------------------------------------- 1 total elements evaluated. * Edge length maximum quality/edge_max/y cmo/addatt//edgemax/VDOUBLE/scalar/nelements finish epsilonl, epsilonaspect: 2.3075552E-13 1.2287296E-38 -------------------------------------------- Edge max normalized by dividing with max value. element norm max edge length < .01: 0 element norm edge length b/w .01 and .02: 0 element norm edge length b/w .02 and .05: 0 element norm edge length b/w .05 and .1 : 0 element norm edge length b/w .1 and .2 : 0 element norm edge length b/w .2 and .5 : 0 element norm edge length b/w .5 and 1. : 1 min max edge length = 0.1010E+01 max max edge length = 0.1010E+01 ----------------------------------------------------------- 1 total elements evaluated. * volume quality/volume epsilonvol: 8.8817842E-15 --------------------------------------- All elements have volume 6.6666667E-03 ----------------------------------------------------------- 1 total elements evaluated. * quality epsilonl, epsilonaspect: 2.3075552E-13 1.2287296E-38 -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 0 elements with aspect ratio b/w .1 and .2 : 0 elements with aspect ratio b/w .2 and .5 : 1 elements with aspect ratio b/w .5 and 1. : 0 min aspect ratio = 0.3429E+00 max aspect ratio = 0.3429E+00 epsilonvol: 8.8817842E-15 --------------------------------------- All elements have volume 6.6666667E-03 ----------------------------------------------------------- 1 total elements evaluated. * quality/angle/lt 20. ------------------------------------------ elements with angles < 20.000: 0 min angle = 53.358 max angle = 87.439 ----------------------------------------------------------- 1 total elements evaluated. quality/angle/gt 90. ------------------------------------------ elements with angles > 90.000: 0 min angle = 53.358 max angle = 87.439 ----------------------------------------------------------- 1 total elements evaluated. finish cmo printatt MO_NAME -all- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 4 scalar 1 1 0 1 vector 3 3 0 1 nnodes 4 4 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 1 1 0 1 mbndry 16000000 16000000 0 1 ndimensions_topo 3 3 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 4 4 0 1 edges_per_element 6 6 0 1 faces_per_element 4 4 0 1 isetwd 0 0 0 4 ialias 0 0 0 4 imt1 1 1 0 4 itp1 10 10 0 4 icr1 0 0 0 4 isn1 0 0 0 4 xic -1.000000000E-01 1.000000000E-01 2.000000000E-01 4 yic -1.000000000E-01 1.000000000E-01 2.000000000E-01 4 zic 0.000000000E+00 1.000000000E+00 1.000000000E+00 4 xtetwd 0 0 0 1 itetclr 1 1 0 1 itettyp 5 5 0 1 itetoff 0 0 0 1 jtetoff 0 0 0 1 itet 1 4 3 1x4 jtet 16000000 16000000 0 1x4 epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 2.307555224E-13 2.307555224E-13 0.000000000E+00 1 epsilona 2.398081733E-13 2.398081733E-13 0.000000000E+00 1 epsilonv 8.881784197E-15 8.881784197E-15 0.000000000E+00 1 ipointi 1 1 0 1 ipointj 4 4 0 1 idebug 0 0 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin -1.000000000E-01 -1.000000000E-01 0.000000000E+00 1 ymin -1.000000000E-01 -1.000000000E-01 0.000000000E+00 1 zmin 0.000000000E+00 0.000000000E+00 0.000000000E+00 1 xmax 1.000000000E-01 1.000000000E-01 0.000000000E+00 1 ymax 1.000000000E-01 1.000000000E-01 0.000000000E+00 1 zmax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 0 0 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 aratio 3.429377054E-01 3.429377054E-01 0.000000000E+00 1 a_mind 5.335848724E+01 5.335848724E+01 0.000000000E+00 1 a_maxd 8.743936103E+01 8.743936103E+01 0.000000000E+00 1 s_maxd 5.561822968E+01 5.561822968E+01 0.000000000E+00 1 s_mind 1.137410829E+00 1.137410829E+00 0.000000000E+00 1 eratio 1.980295086E-01 1.980295086E-01 0.000000000E+00 1 a_minr 9.312812863E-01 9.312812863E-01 0.000000000E+00 1 a_maxr 1.526104746E+00 1.526104746E+00 0.000000000E+00 1 s_minr 1.985156392E-02 1.985156392E-02 0.000000000E+00 1 s_maxr 9.707212321E-01 9.707212321E-01 0.000000000E+00 1 edgemin 2.000000000E-01 2.000000000E-01 0.000000000E+00 1 edgemax 1.009950494E+00 1.009950494E+00 0.000000000E+00 1 # aratio = 0.3429 # a_mind = 5.33585E+01 # a_maxd = 8.74394E+01 # s_mind = 5.56182E+01 # eratio = 1.98030E-01 # ------------------------------------- # WEDGE define MO_NAME mo_wedge read input_tet_wedge.inp MO_NAME read/avs/input_tet_wedge.inp/mo_wedge geniee finish cmo/status/brief The current-mesh-object(CMO) is: mo_wedge 1 Mesh Object name: mo_equal number of nodes = 4 number of elements = 1 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = inactive 2 Mesh Object name: mo_sliver number of nodes = 4 number of elements = 1 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = inactive 3 Mesh Object name: mo_cap number of nodes = 4 number of elements = 1 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = inactive 4 Mesh Object name: mo_needle number of nodes = 4 number of elements = 1 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = inactive 5 Mesh Object name: mo_wedge number of nodes = 4 number of elements = 1 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = active finish finish infile input_quality.mlgi * ******************************************** * Aspect Ratio quality/aspect/y cmo/addatt//aratio/VDOUBLE/scalar/nelements finish epsilonl, epsilonaspect: 4.9848890E-13 1.2387010E-37 -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 0 elements with aspect ratio b/w .1 and .2 : 0 elements with aspect ratio b/w .2 and .5 : 1 elements with aspect ratio b/w .5 and 1. : 0 min aspect ratio = 0.2617E+00 max aspect ratio = 0.2617E+00 ----------------------------------------------------------- 1 total elements evaluated. * Minimum Dihedral Angle, (degree) cmo/addatt/MO_NAME/ang_mind/a_mind ADDATT/ang_mind: creating new attribute: a_mind * Maximum Dihedral Angle, (degree) cmo/addatt/MO_NAME/ang_maxd/a_maxd ADDATT/ang_maxd: creating new attribute: a_maxd * Maximum Solid Angle, (degree) cmo/addatt/MO_NAME/ang_maxd_solid/s_maxd ADDATT/ang_maxd_solid: creating new attribute: s_maxd * Minimum Solid Angle, (degree) cmo/addatt/MO_NAME/ang_mind_solid/s_mind ADDATT/ang_mind_solid: creating new attribute: s_mind * ( min edge length ) / ( max edge length ) quality/edge_ratio/y cmo/addatt//eratio/VDOUBLE/scalar/nelements finish epsilonl, epsilonaspect: 4.9848890E-13 1.2387010E-37 -------------------------------------------- elements with min/max edge ratio < .01: 0 elements with min/max edge ratio b/w .01 and .02: 0 elements with min/max edge ratio b/w .02 and .05: 0 elements with min/max edge ratio b/w .05 and .1 : 1 elements with min/max edge ratio b/w .1 and .2 : 0 elements with min/max edge ratio b/w .2 and .5 : 0 elements with min/max edge ratio b/w .5 and 1. : 0 min edge ratio = 0.1000E+00 max edge ratio = 0.1000E+00 ----------------------------------------------------------- 1 total elements evaluated. ******************************************** * Minimum Dihedral Angle, (radian) cmo/addatt/MO_NAME/ang_minr/a_minr ADDATT/ang_minr: creating new attribute: a_minr * Maximum Dihedral Angle, (radian) cmo/addatt/MO_NAME/ang_maxr/a_maxr ADDATT/ang_maxr: creating new attribute: a_maxr * Minimum Solid Angle, (radian) cmo/addatt/MO_NAME/ang_minr_solid/s_minr ADDATT/ang_minr_solid: creating new attribute: s_minr * Maximum Solid Angle, (radian) cmo/addatt/MO_NAME/ang_maxr_solid/s_maxr ADDATT/ang_maxr_solid: creating new attribute: s_maxr * Edge length minimum quality/edge_min/y cmo/addatt//edgemin/VDOUBLE/scalar/nelements finish epsilonl, epsilonaspect: 4.9848890E-13 1.2387010E-37 -------------------------------------------- Edge min normalized by dividing with max value. element norm min edge length < .01: 0 element norm edge length b/w .01 and .02: 0 element norm edge length b/w .02 and .05: 0 element norm edge length b/w .05 and .1 : 0 element norm edge length b/w .1 and .2 : 0 element norm edge length b/w .2 and .5 : 0 element norm edge length b/w .5 and 1. : 1 min min edge length = 0.2000E+00 max min edge length = 0.2000E+00 ----------------------------------------------------------- 1 total elements evaluated. * Edge length maximum quality/edge_max/y cmo/addatt//edgemax/VDOUBLE/scalar/nelements finish epsilonl, epsilonaspect: 4.9848890E-13 1.2387010E-37 -------------------------------------------- Edge max normalized by dividing with max value. element norm max edge length < .01: 0 element norm edge length b/w .01 and .02: 0 element norm edge length b/w .02 and .05: 0 element norm edge length b/w .05 and .1 : 0 element norm edge length b/w .1 and .2 : 0 element norm edge length b/w .2 and .5 : 0 element norm edge length b/w .5 and 1. : 1 min max edge length = 0.2000E+01 max max edge length = 0.2000E+01 ----------------------------------------------------------- 1 total elements evaluated. * volume quality/volume epsilonvol: 8.8817842E-14 --------------------------------------- All elements have volume 6.6666667E-02 ----------------------------------------------------------- 1 total elements evaluated. * quality epsilonl, epsilonaspect: 4.9848890E-13 1.2387010E-37 -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 0 elements with aspect ratio b/w .1 and .2 : 0 elements with aspect ratio b/w .2 and .5 : 1 elements with aspect ratio b/w .5 and 1. : 0 min aspect ratio = 0.2617E+00 max aspect ratio = 0.2617E+00 epsilonvol: 8.8817842E-14 --------------------------------------- All elements have volume 6.6666667E-02 ----------------------------------------------------------- 1 total elements evaluated. * quality/angle/lt 20. ------------------------------------------ elements with angles < 20.000: 1 tets with angles < 20.000: 1 min angle = 11.421 max angle = 90.000 ----------------------------------------------------------- 1 total elements evaluated. quality/angle/gt 90. ------------------------------------------ elements with angles > 90.000: 0 min angle = 11.421 max angle = 90.000 ----------------------------------------------------------- 1 total elements evaluated. finish cmo printatt MO_NAME -all- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 4 scalar 1 1 0 1 vector 3 3 0 1 nnodes 4 4 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 1 1 0 1 mbndry 16000000 16000000 0 1 ndimensions_topo 3 3 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 4 4 0 1 edges_per_element 6 6 0 1 faces_per_element 4 4 0 1 isetwd 0 0 0 4 ialias 0 0 0 4 imt1 1 1 0 4 itp1 10 10 0 4 icr1 0 0 0 4 isn1 0 0 0 4 xic -1.000000000E+00 1.000000000E+00 2.000000000E+00 4 yic 0.000000000E+00 1.000000000E+00 1.000000000E+00 4 zic -1.000000000E-01 1.000000000E-01 2.000000000E-01 4 xtetwd 0 0 0 1 itetclr 1 1 0 1 itettyp 5 5 0 1 itetoff 0 0 0 1 jtetoff 0 0 0 1 itet 1 4 3 1x4 jtet 16000000 16000000 0 1x4 epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 4.984889017E-13 4.984889017E-13 0.000000000E+00 1 epsilona 1.119104809E-12 1.119104809E-12 0.000000000E+00 1 epsilonv 8.881784197E-14 8.881784197E-14 0.000000000E+00 1 ipointi 1 1 0 1 ipointj 4 4 0 1 idebug 0 0 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 ymin 0.000000000E+00 0.000000000E+00 0.000000000E+00 1 zmin -1.000000000E-01 -1.000000000E-01 0.000000000E+00 1 xmax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 ymax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 zmax 1.000000000E-01 1.000000000E-01 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 0 0 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 aratio 2.616834580E-01 2.616834580E-01 0.000000000E+00 1 a_mind 1.142118627E+01 1.142118627E+01 0.000000000E+00 1 a_maxd 9.000000000E+01 9.000000000E+01 0.000000000E+00 1 s_maxd 8.193069884E+01 8.193069884E+01 0.000000000E+00 1 s_mind 3.351885116E+00 3.351885116E+00 0.000000000E+00 1 eratio 1.000000000E-01 1.000000000E-01 0.000000000E+00 1 a_minr 1.993373050E-01 1.993373050E-01 0.000000000E+00 1 a_maxr 1.570796327E+00 1.570796327E+00 0.000000000E+00 1 s_minr 5.850143143E-02 5.850143143E-02 0.000000000E+00 1 s_maxr 1.429960453E+00 1.429960453E+00 0.000000000E+00 1 edgemin 2.000000000E-01 2.000000000E-01 0.000000000E+00 1 edgemax 2.000000000E+00 2.000000000E+00 0.000000000E+00 1 # aratio = 0.2617 # a_mind = 1.14212E+01 # a_maxd = 90.0 # s_mind = 8.19307E+01 # eratio = 0.1 # ------------------------------------- # RIGHT ANGLE define MO_NAME mo_right read input_tet_right.inp MO_NAME read/avs/input_tet_right.inp/mo_right geniee finish cmo/status/brief The current-mesh-object(CMO) is: mo_right 1 Mesh Object name: mo_equal number of nodes = 4 number of elements = 1 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = inactive 2 Mesh Object name: mo_sliver number of nodes = 4 number of elements = 1 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = inactive 3 Mesh Object name: mo_cap number of nodes = 4 number of elements = 1 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = inactive 4 Mesh Object name: mo_needle number of nodes = 4 number of elements = 1 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = inactive 5 Mesh Object name: mo_wedge number of nodes = 4 number of elements = 1 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = inactive 6 Mesh Object name: mo_right number of nodes = 4 number of elements = 1 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = active finish finish infile input_quality.mlgi * ******************************************** * Aspect Ratio quality/aspect/y cmo/addatt//aratio/VDOUBLE/scalar/nelements finish epsilonl, epsilonaspect: 3.8459254E-13 5.6885628E-38 -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 0 elements with aspect ratio b/w .1 and .2 : 0 elements with aspect ratio b/w .2 and .5 : 0 elements with aspect ratio b/w .5 and 1. : 1 min aspect ratio = 0.7174E+00 max aspect ratio = 0.7174E+00 ----------------------------------------------------------- 1 total elements evaluated. * Minimum Dihedral Angle, (degree) cmo/addatt/MO_NAME/ang_mind/a_mind ADDATT/ang_mind: creating new attribute: a_mind * Maximum Dihedral Angle, (degree) cmo/addatt/MO_NAME/ang_maxd/a_maxd ADDATT/ang_maxd: creating new attribute: a_maxd * Maximum Solid Angle, (degree) cmo/addatt/MO_NAME/ang_maxd_solid/s_maxd ADDATT/ang_maxd_solid: creating new attribute: s_maxd * Minimum Solid Angle, (degree) cmo/addatt/MO_NAME/ang_mind_solid/s_mind ADDATT/ang_mind_solid: creating new attribute: s_mind * ( min edge length ) / ( max edge length ) quality/edge_ratio/y cmo/addatt//eratio/VDOUBLE/scalar/nelements finish epsilonl, epsilonaspect: 3.8459254E-13 5.6885628E-38 -------------------------------------------- elements with min/max edge ratio < .01: 0 elements with min/max edge ratio b/w .01 and .02: 0 elements with min/max edge ratio b/w .02 and .05: 0 elements with min/max edge ratio b/w .05 and .1 : 0 elements with min/max edge ratio b/w .1 and .2 : 0 elements with min/max edge ratio b/w .2 and .5 : 0 elements with min/max edge ratio b/w .5 and 1. : 1 min edge ratio = 0.5774E+00 max edge ratio = 0.5774E+00 ----------------------------------------------------------- 1 total elements evaluated. ******************************************** * Minimum Dihedral Angle, (radian) cmo/addatt/MO_NAME/ang_minr/a_minr ADDATT/ang_minr: creating new attribute: a_minr * Maximum Dihedral Angle, (radian) cmo/addatt/MO_NAME/ang_maxr/a_maxr ADDATT/ang_maxr: creating new attribute: a_maxr * Minimum Solid Angle, (radian) cmo/addatt/MO_NAME/ang_minr_solid/s_minr ADDATT/ang_minr_solid: creating new attribute: s_minr * Maximum Solid Angle, (radian) cmo/addatt/MO_NAME/ang_maxr_solid/s_maxr ADDATT/ang_maxr_solid: creating new attribute: s_maxr * Edge length minimum quality/edge_min/y cmo/addatt//edgemin/VDOUBLE/scalar/nelements finish epsilonl, epsilonaspect: 3.8459254E-13 5.6885628E-38 -------------------------------------------- Edge min normalized by dividing with max value. element norm min edge length < .01: 0 element norm edge length b/w .01 and .02: 0 element norm edge length b/w .02 and .05: 0 element norm edge length b/w .05 and .1 : 0 element norm edge length b/w .1 and .2 : 0 element norm edge length b/w .2 and .5 : 0 element norm edge length b/w .5 and 1. : 1 min min edge length = 0.1000E+01 max min edge length = 0.1000E+01 ----------------------------------------------------------- 1 total elements evaluated. * Edge length maximum quality/edge_max/y cmo/addatt//edgemax/VDOUBLE/scalar/nelements finish epsilonl, epsilonaspect: 3.8459254E-13 5.6885628E-38 -------------------------------------------- Edge max normalized by dividing with max value. element norm max edge length < .01: 0 element norm edge length b/w .01 and .02: 0 element norm edge length b/w .02 and .05: 0 element norm edge length b/w .05 and .1 : 0 element norm edge length b/w .1 and .2 : 0 element norm edge length b/w .2 and .5 : 0 element norm edge length b/w .5 and 1. : 1 min max edge length = 0.1732E+01 max max edge length = 0.1732E+01 ----------------------------------------------------------- 1 total elements evaluated. * volume quality/volume epsilonvol: 2.2204460E-13 --------------------------------------- All elements have volume 1.6666667E-01 ----------------------------------------------------------- 1 total elements evaluated. * quality epsilonl, epsilonaspect: 3.8459254E-13 5.6885628E-38 -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 0 elements with aspect ratio b/w .1 and .2 : 0 elements with aspect ratio b/w .2 and .5 : 0 elements with aspect ratio b/w .5 and 1. : 1 min aspect ratio = 0.7174E+00 max aspect ratio = 0.7174E+00 epsilonvol: 2.2204460E-13 --------------------------------------- All elements have volume 1.6666667E-01 ----------------------------------------------------------- 1 total elements evaluated. * quality/angle/lt 20. ------------------------------------------ elements with angles < 20.000: 0 min angle = 45.000 max angle = 90.000 ----------------------------------------------------------- 1 total elements evaluated. quality/angle/gt 90. ------------------------------------------ elements with angles > 90.000: 0 min angle = 45.000 max angle = 90.000 ----------------------------------------------------------- 1 total elements evaluated. finish cmo printatt MO_NAME -all- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 4 scalar 1 1 0 1 vector 3 3 0 1 nnodes 4 4 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 1 1 0 1 mbndry 16000000 16000000 0 1 ndimensions_topo 3 3 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 4 4 0 1 edges_per_element 6 6 0 1 faces_per_element 4 4 0 1 isetwd 0 0 0 4 ialias 0 0 0 4 imt1 1 1 0 4 itp1 10 10 0 4 icr1 0 0 0 4 isn1 0 0 0 4 xic 0.000000000E+00 1.000000000E+00 1.000000000E+00 4 yic 0.000000000E+00 1.000000000E+00 1.000000000E+00 4 zic 0.000000000E+00 1.000000000E+00 1.000000000E+00 4 xtetwd 0 0 0 1 itetclr 1 1 0 1 itettyp 5 5 0 1 itetoff 0 0 0 1 jtetoff 0 0 0 1 itet 1 4 3 1x4 jtet 16000000 16000000 0 1x4 epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 3.845925373E-13 3.845925373E-13 0.000000000E+00 1 epsilona 6.661338148E-13 6.661338148E-13 0.000000000E+00 1 epsilonv 2.220446049E-13 2.220446049E-13 0.000000000E+00 1 ipointi 1 1 0 1 ipointj 4 4 0 1 idebug 0 0 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin 0.000000000E+00 0.000000000E+00 0.000000000E+00 1 ymin 0.000000000E+00 0.000000000E+00 0.000000000E+00 1 zmin 0.000000000E+00 0.000000000E+00 0.000000000E+00 1 xmax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 ymax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 zmax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 0 0 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 aratio 7.174389352E-01 7.174389352E-01 0.000000000E+00 1 a_mind 4.500000000E+01 4.500000000E+01 0.000000000E+00 1 a_maxd 9.000000000E+01 9.000000000E+01 0.000000000E+00 1 s_maxd 4.500000000E+01 4.500000000E+01 0.000000000E+00 1 s_mind 1.500000000E+01 1.500000000E+01 0.000000000E+00 1 eratio 5.773502692E-01 5.773502692E-01 0.000000000E+00 1 a_minr 7.853981634E-01 7.853981634E-01 0.000000000E+00 1 a_maxr 1.570796327E+00 1.570796327E+00 0.000000000E+00 1 s_minr 2.617993878E-01 2.617993878E-01 0.000000000E+00 1 s_maxr 7.853981634E-01 7.853981634E-01 0.000000000E+00 1 edgemin 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 edgemax 1.732050808E+00 1.732050808E+00 0.000000000E+00 1 # ------------------------------------- # CUBES quality/volume/ # create and connect cube points cmo/create/mo createpts/brick/xyz/2 2 2/0. 0. 0./1. 1. 1./1 1 1 Number of nodes: 8 Number of elements: 1 Number of negative volume elements: 0 Total volume: 0.100000000000E+01 createpts/brick/xyz/2 2 2/0. 0. 1./1. 1. 2.2/1 1 1 Number of nodes: 16 Number of elements: 2 Number of negative volume elements: 0 Total volume: 0.120000000000E+01 cmo/select/mo filter 1,0,0 FILTER:Use internal epsilonl value = 0.580721996296E-12 FILTER:Dudding duplicate points: 4 rmpoint compress 4 points removed and 0 elements removed. RMPOINT: new point count is 12 RMPOINT: new element count is 2 resetpts itp geniee finish cmo/create/cmotet///tet copypts/cmotet/mo copypts added nodes 1 to 12 cmo/delete/mo Released Mesh Object: mo cmo/select/cmotet connect No materials associated with 12 noninterface points. Coordinates of enclosing tetrahedron are: -0.20000D+01 -0.75000D+00 -0.16500D+01 0.50000D+00 -0.75000D+00 0.93500D+01 0.30000D+01 -0.75000D+00 -0.16500D+01 0.50000D+00 0.42500D+01 0.11000D+01 Candidate connections that may cross boundaries = 56 Successfully eliminated all multimaterial connections. The mesh is now complete! LaGriT FINISH: connect cmo/setatt/cmotet/itetclr/1 12 values reset for attribute itetclr resetpts/itp geniee finish # assign material 2 to top cube pset/p2/attribute zic/1,0,0/ge 1. THE PSET p2 HAS 8 POINTS eltset/e2/exclusive pset,get,p2 THE ELTSET e2 HAS 6 ELEMENTS cmo setatt cmotet itetclr eltset,get,e2 2 6 values reset for attribute itetclr cmo setatt cmotet imt pset,get,p2 2 8 values reset for attribute imt1 resetpts itp geniee finish cmo/addatt/cmotet/volume/voltet ADDATT/volume: creating new attribute: voltet cmo/printatt/cmotet/voltet Attribute: voltet 1 1.66667E-01 2 2.00000E-01 3 1.66667E-01 4 2.00000E-01 5 2.00000E-01 6 1.66667E-01 7 2.00000E-01 8 1.66667E-01 9 1.66667E-01 10 2.00000E-01 11 1.66667E-01 12 2.00000E-01 ######################### quality epsilonl, epsilonaspect: 5.8072200E-13 1.9584155E-37 -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 0 elements with aspect ratio b/w .1 and .2 : 0 elements with aspect ratio b/w .2 and .5 : 0 elements with aspect ratio b/w .5 and 1. : 12 min aspect ratio = 0.6230E+00 max aspect ratio = 0.7321E+00 epsilonvol: 4.8849813E-13 --------------------------------------- element volumes b/w 0.1667E+00 and 0.1729E+00: 6 element volumes b/w 0.1729E+00 and 0.1793E+00: 0 element volumes b/w 0.1793E+00 and 0.1859E+00: 0 element volumes b/w 0.1859E+00 and 0.1928E+00: 0 element volumes b/w 0.1928E+00 and 0.2000E+00: 6 min volume = 1.6666667E-01 max volume = 2.0000000E-01 ----------------------------------------------------------- 12 total elements evaluated. quality/volume/itetclr QUALITY TOTALS for 2 MATERIALS: ........................................................... eltset/-etmp-/itetclr/eq/1/ THE ELTSET -etmp- HAS 6 ELEMENTS finish epsilonvol: 4.8849813E-13 --------------------------------------- VOLUMES for ELEMENT COLOR 1 ........................... All elements have volume 1.6666667E-01 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/2/ THE ELTSET -etmp- HAS 6 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 2 ........................... All elements have volume 2.0000000E-01 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish --------------------------------------- SUMMARY VOLUME/AREA of ELEMENT COLORS for cmotet 1 2 ........................................................... Color Num. Elements Volume Fractional Volume 1 6 0.1000000E+01 0.454545455 2 6 0.1200000E+01 0.545454545 Total elements: 12 Total Volume: 0.2200000E+01 ----------------------------------------------------------- 12 total elements evaluated. quality/volume/3 epsilonvol: 4.8849813E-13 --------------------------------------- element volumes b/w 0.1667E+00 and 0.1771E+00: 6 element volumes b/w 0.1771E+00 and 0.1882E+00: 0 element volumes b/w 0.1882E+00 and 0.2000E+00: 6 min volume = 1.6666667E-01 max volume = 2.0000000E-01 ----------------------------------------------------------- 12 total elements evaluated. eltset/e1/itetclr/eq 1 THE ELTSET e1 HAS 6 ELEMENTS quality/volume/eltset,get,e1 epsilonvol: 4.8849813E-13 --------------------------------------- All elements have volume 1.6666667E-01 ----------------------------------------------------------- 6 total elements evaluated in eltset e1 ######################### # pcc # no negative ccoefs quality epsilonl, epsilonaspect: 5.8072200E-13 1.9584155E-37 -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 0 elements with aspect ratio b/w .1 and .2 : 0 elements with aspect ratio b/w .2 and .5 : 0 elements with aspect ratio b/w .5 and 1. : 12 min aspect ratio = 0.6230E+00 max aspect ratio = 0.7321E+00 epsilonvol: 4.8849813E-13 --------------------------------------- element volumes b/w 0.1667E+00 and 0.1729E+00: 6 element volumes b/w 0.1729E+00 and 0.1793E+00: 0 element volumes b/w 0.1793E+00 and 0.1859E+00: 0 element volumes b/w 0.1859E+00 and 0.1928E+00: 0 element volumes b/w 0.1928E+00 and 0.2000E+00: 6 min volume = 1.6666667E-01 max volume = 2.0000000E-01 ----------------------------------------------------------- 12 total elements evaluated. quality/pcc cmo/addatt//neg_coup_coeff/VDOUBLE/scalar/nelements finish Coupling Coefficients marked in attribute neg_coup_coeff: Total negative ccoefs found: 0 cmo/printatt/cmotet/-all- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 12 scalar 1 1 0 1 vector 3 3 0 1 nnodes 12 12 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 12 12 0 1 mbndry 16000000 16000000 0 1 ndimensions_topo 3 3 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 4 4 0 1 edges_per_element 6 6 0 1 faces_per_element 4 4 0 1 isetwd 0 1 1 12 ialias 0 0 0 12 imt1 1 2 1 12 itp1 10 12 2 12 icr1 0 0 0 12 isn1 0 0 0 12 xic 0.000000000E+00 1.000000000E+00 1.000000000E+00 12 yic 0.000000000E+00 1.000000000E+00 1.000000000E+00 12 zic 0.000000000E+00 2.200000000E+00 2.200000000E+00 12 xtetwd 1 2 1 12 itetclr 1 2 1 12 itettyp 5 5 0 12 itetoff 0 44 44 12 jtetoff 0 44 44 12 itet 1 12 11 12x4 jtet 1 16000026 16000025 12x4 epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 5.807219963E-13 5.807219963E-13 0.000000000E+00 1 epsilona 1.518785098E-12 1.518785098E-12 0.000000000E+00 1 epsilonv 4.884981308E-13 4.884981308E-13 0.000000000E+00 1 ipointi 12 12 0 1 ipointj 12 12 0 1 idebug 0 0 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin 0.000000000E+00 0.000000000E+00 0.000000000E+00 1 ymin 0.000000000E+00 0.000000000E+00 0.000000000E+00 1 zmin 0.000000000E+00 0.000000000E+00 0.000000000E+00 1 xmax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 ymax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 zmax 2.200000000E+00 2.200000000E+00 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 1 1 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 voltet 1.666666667E-01 2.000000000E-01 3.333333333E-02 12 neg_coup_coeff 1.000000000E+00 1.000000000E+00 0.000000000E+00 12 cmo/printatt/cmotet/neg_coup_coeff Attribute: neg_coup_coeff 1 1.00000E+00 2 1.00000E+00 3 1.00000E+00 4 1.00000E+00 5 1.00000E+00 6 1.00000E+00 7 1.00000E+00 8 1.00000E+00 9 1.00000E+00 10 1.00000E+00 11 1.00000E+00 12 1.00000E+00 ######################### # pcc # skew tets by moving a node cmo/setatt/cmotet/xic 12,12,1 .5 1 values reset for attribute xic cmo/DELATT/cmotet/neg_coup_coeff quality epsilonl, epsilonaspect: 5.8072200E-13 1.9584155E-37 -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 0 elements with aspect ratio b/w .1 and .2 : 0 elements with aspect ratio b/w .2 and .5 : 1 elements with aspect ratio b/w .5 and 1. : 11 min aspect ratio = 0.3537E+00 max aspect ratio = 0.7321E+00 epsilonvol: 4.8849813E-13 --------------------------------------- element volumes b/w 0.1000E+00 and 0.1149E+00: 1 element volumes b/w 0.1149E+00 and 0.1320E+00: 0 element volumes b/w 0.1320E+00 and 0.1516E+00: 0 element volumes b/w 0.1516E+00 and 0.1741E+00: 6 element volumes b/w 0.1741E+00 and 0.2000E+00: 5 min volume = 1.0000000E-01 max volume = 2.0000000E-01 ----------------------------------------------------------- 12 total elements evaluated. quality/pcc cmo/addatt//neg_coup_coeff/VDOUBLE/scalar/nelements finish Coupling Coefficients marked in attribute neg_coup_coeff: tet 2 has negative coeff -0.2000E+00 tet 10 has negative coeff -0.5902E+00 tet 12 has negative coeff -0.5000E+00 Total negative ccoefs found: 3 cmo/printatt/cmotet/neg_coup_coeff Attribute: neg_coup_coeff 1 1.00000E+00 2 2.00000E-01 3 1.00000E+00 4 1.00000E+00 5 1.00000E+00 6 1.00000E+00 7 1.00000E+00 8 1.00000E+00 9 1.00000E+00 10 5.90164E-01 11 1.00000E+00 12 5.00000E-01 finish LaGriT successfully completed