* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Program: LaGriT V3.330 Linux * * * date_compile: 2021/10/15 test * * * Run Time: 2021/Nov 29 11:22:44 * * * Manual: http://lagrit.lanl.gov * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -----oOo----- LaGriT V3 LA-CC-15-069 https://github.com/lanl/LaGriT Copyright 2016. Triad National Security, LLC. All rights reserved. This program was produced under U.S. Government contract 89233218CNA000001 for Los Alamos National Laboratory (LANL), which is operated by Triad National Security, LLC for the U.S. Department of Energy/National Nuclear Security Administration. All rights in the program are reserved by Triad National Security, LLC, and the U.S. Department of Energy/National Nuclear Security Administration. The Government is granted for itself and others acting on its behalf a nonexclusive, paid-up, irrevocable worldwide license in this material to reproduce, prepare derivative works, distribute copies to the public, perform publicly and display publicly, and to permit others to do so. This software is open source and available under the BSD-3 License. -----oOo----- Output log file: outx3dgen Command log file: logx3dgen # test GOCAD read/gocad/input_2tets_Zelev.so/cmoin Reading GOCAD file: input_2tets_Zelev.so cmo/create/cmoin///tet finish ................................................... SET VRTX properties: cmo/addatt/cmoin/NodeId/VINT scalar/nnodes/linear/permanent/gxaf/0.0/ finish READ VRTX data with word count: 6 READ VRTX property with index: 1 ................................................... SET CELL properties: cmo/addatt/cmoin/CompartmentId/VINT scalar/nelements/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/ElementId/VINT scalar/nelements/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/ZoneId/VINT scalar/nelements/linear/permanent/gxaf/0.0/ finish READ CELL data with word count: 8 READ CELL property with index: 3 geniee finish --- READ GOCAD FINISHED -------- Mesh Type: TSolid ZPOSITIVE: Elev Up Nodes: 5 Tets: 2 Cells: 2 Node properties: 1 Cell properties: 3 LINES read: 52 cmo/status/brief The current-mesh-object(CMO) is: cmoin 1 Mesh Object name: cmoin number of nodes = 5 number of elements = 2 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = active finish quality epsilonl, epsilonaspect: 5.4389598E-13 1.6089685E-37 -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 0 elements with aspect ratio b/w .1 and .2 : 0 elements with aspect ratio b/w .2 and .5 : 0 elements with aspect ratio b/w .5 and 1. : 2 min aspect ratio = 0.7174E+00 max aspect ratio = 0.7174E+00 epsilonvol: 4.4408921E-13 --------------------------------------- All elements have volume -1.6666667E-01 ----------------------------------------------------------- 2 total elements evaluated. cmo/delete/cmoin Released Mesh Object: cmoin read/gocad/input_small_js.so/cmoin Reading GOCAD file: input_small_js.so cmo/create/cmoin///tet finish ................................................... SET VRTX properties: cmo/addatt/cmoin/NodeId/VINT scalar/nnodes/linear/permanent/gxaf/0.0/ finish READ VRTX data with word count: 6 READ VRTX property with index: 1 ................................................... SET CELL properties: cmo/addatt/cmoin/CompartmentId/VINT scalar/nelements/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/ElementId/VINT scalar/nelements/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/ZoneId/VINT scalar/nelements/linear/permanent/gxaf/0.0/ finish READ CELL data with word count: 8 READ CELL property with index: 3 geniee finish --- READ GOCAD FINISHED -------- Mesh Type: TSolid ZPOSITIVE: Z Depth Nodes: 11 Tets: 6 Cells: 6 Node properties: 1 Cell properties: 3 LINES read: 61 cmo/status/brief The current-mesh-object(CMO) is: cmoin 1 Mesh Object name: cmoin number of nodes = 11 number of elements = 6 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = active finish quality epsilonl, epsilonaspect: 1.2444411E-12 1.9271832E-36 -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 0 elements with aspect ratio b/w .1 and .2 : 0 elements with aspect ratio b/w .2 and .5 : 0 elements with aspect ratio b/w .5 and 1. : 6 min aspect ratio = 0.7992E+00 max aspect ratio = 0.9210E+00 epsilonvol: 7.3156026E-12 --------------------------------------- element volumes b/w 0.5189E+00 and 0.5976E+00: 2 element volumes b/w 0.5976E+00 and 0.6883E+00: 2 element volumes b/w 0.6883E+00 and 0.7928E+00: 1 element volumes b/w 0.7928E+00 and 0.9131E+00: 0 element volumes b/w 0.9131E+00 and 0.1052E+01: 1 min volume = 5.1890035E-01 max volume = 1.0516859E+00 ----------------------------------------------------------- 6 total elements evaluated. cmo/delete/cmoin Released Mesh Object: cmoin read/gocad/input_3tri_all_props.ts/cmoin Reading GOCAD file: input_3tri_all_props.ts cmo/create/cmoin///tri finish cmo/addatt/-def-/iblock/VINT/scalar/nelements finish ................................................... SET VRTX properties: cmo/addatt/cmoin/GaussianCurvature/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0 .0/ finish cmo/addatt/cmoin/MeanCurvature/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/K1/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/K2/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/K1_Plunge/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/K1_Trend/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/K2_Plunge/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/K2_Trend/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/FrameX_Trend/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/FrameX_Plunge/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/FrameZ_Trend/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/FrameZ_Plunge/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/Dip_Azim/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/Dip_Angle/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/FaultStrike/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish READ VRTX data with word count: 20 READ VRTX property with index: 15 ................................................... SET CELL properties: cmo/addatt/cmoin/ZoneId/VINT scalar/nelements/linear/permanent/gxaf/0.0/ finish READ CELL data with word count: 5 READ CELL property with index: 1 geniee finish --- READ GOCAD FINISHED -------- Mesh Type: TSurf ZPOSITIVE: Elev Up Nodes: 6 Triangles: 3 Cells: 3 Node properties: 15 Cell properties: 1 LINES read: 37 cmo/status/brief The current-mesh-object(CMO) is: cmoin 1 Mesh Object name: cmoin number of nodes = 6 number of elements = 3 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = active finish quality epsilonl, epsilonaspect: 1.9692101E-11 7.6361796E-33 -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 0 elements with aspect ratio b/w .1 and .2 : 0 elements with aspect ratio b/w .2 and .5 : 2 elements with aspect ratio b/w .5 and 1. : 1 min aspect ratio = 0.2334E+00 max aspect ratio = 0.5034E+00 epsilonvol: 2.1869340E-08 --------------------------------------- element volumes b/w 0.1310E+02 and 0.3111E+02: 1 element volumes b/w 0.3111E+02 and 0.7391E+02: 0 element volumes b/w 0.7391E+02 and 0.1756E+03: 0 element volumes b/w 0.1756E+03 and 0.4172E+03: 1 element volumes b/w 0.4172E+03 and 0.9911E+03: 1 min volume = 1.3095067E+01 max volume = 9.9106654E+02 ----------------------------------------------------------- 3 total elements evaluated. cmo/delete/cmoin Released Mesh Object: cmoin read/gocad/input_3tri_node_props.ts/cmoin Reading GOCAD file: input_3tri_node_props.ts cmo/create/cmoin///tri finish cmo/addatt/-def-/iblock/VINT/scalar/nelements finish ................................................... SET VRTX properties: cmo/addatt/cmoin/GaussianCurvature/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0 .0/ finish cmo/addatt/cmoin/MeanCurvature/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/K1/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/K2/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/K1_Plunge/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/K1_Trend/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/K2_Plunge/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/K2_Trend/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/FrameX_Trend/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/FrameX_Plunge/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/FrameZ_Trend/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/FrameZ_Plunge/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/Dip_Azim/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/Dip_Angle/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/prop_15_pvrtx/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish READ VRTX data with word count: 20 READ VRTX property with index: 15 ................................................... SET CELL properties: There are no Cell properties. READ CELL data with word count: 4 READ CELL property with index: 0 geniee finish --- READ GOCAD FINISHED -------- Mesh Type: TSurf ZPOSITIVE: Elev Up Nodes: 6 Triangles: 3 Cells: 3 Node properties: 15 LINES read: 25 cmo/status/brief The current-mesh-object(CMO) is: cmoin 1 Mesh Object name: cmoin number of nodes = 6 number of elements = 3 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = active finish quality epsilonl, epsilonaspect: 1.9692101E-11 7.6361796E-33 -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 0 elements with aspect ratio b/w .1 and .2 : 0 elements with aspect ratio b/w .2 and .5 : 2 elements with aspect ratio b/w .5 and 1. : 1 min aspect ratio = 0.2334E+00 max aspect ratio = 0.5034E+00 epsilonvol: 2.1869340E-08 --------------------------------------- element volumes b/w 0.1310E+02 and 0.3111E+02: 1 element volumes b/w 0.3111E+02 and 0.7391E+02: 0 element volumes b/w 0.7391E+02 and 0.1756E+03: 0 element volumes b/w 0.1756E+03 and 0.4172E+03: 1 element volumes b/w 0.4172E+03 and 0.9911E+03: 1 min volume = 1.3095067E+01 max volume = 9.9106654E+02 ----------------------------------------------------------- 3 total elements evaluated. cmo/delete/cmoin Released Mesh Object: cmoin read/gocad/input_small_TFACE.ts/cmoin Reading GOCAD file: input_small_TFACE.ts cmo/create/cmoin///tri finish cmo/addatt/-def-/iblock/VINT/scalar/nelements finish ................................................... SET VRTX properties: cmo/addatt/cmoin/U/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/V/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/Dip_Angle/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish cmo/addatt/cmoin/FaultStrike/VDOUBLE scalar/nnodes/linear/permanent/gxaf/0.0/ finish READ VRTX data with word count: 9 READ VRTX property with index: 4 ................................................... SET CELL properties: cmo/addatt/cmoin/ZoneId/VINT scalar/nelements/linear/permanent/gxaf/0.0/ finish READ CELL data with word count: 5 READ CELL property with index: 1 geniee finish --- READ GOCAD FINISHED -------- Mesh Type: TSurf ZPOSITIVE: Elev Up Nodes: 12 Triangles: 9 Cells: 9 TFACE: 2 Node properties: 4 Cell properties: 1 LINES read: 74 cmo/status/brief The current-mesh-object(CMO) is: cmoin 1 Mesh Object name: cmoin number of nodes = 12 number of elements = 9 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = active finish quality epsilonl, epsilonaspect: 5.9057653E-11 2.0598166E-31 -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 2 elements with aspect ratio b/w .1 and .2 : 0 elements with aspect ratio b/w .2 and .5 : 6 elements with aspect ratio b/w .5 and 1. : 1 min aspect ratio = 0.7187E-01 max aspect ratio = 0.5034E+00 epsilonvol: 2.2112185E-07 --------------------------------------- element volumes b/w 0.1310E+02 and 0.3379E+02: 1 element volumes b/w 0.3379E+02 and 0.8718E+02: 0 element volumes b/w 0.8718E+02 and 0.2249E+03: 0 element volumes b/w 0.2249E+03 and 0.5803E+03: 3 element volumes b/w 0.5803E+03 and 0.1497E+04: 5 min volume = 1.3095067E+01 max volume = 1.4973814E+03 ----------------------------------------------------------- 9 total elements evaluated. cmo/delete/cmoin Released Mesh Object: cmoin finish LaGriT successfully completed