Remove generated files from autoconf et al, run ./autogen.sh instead.

Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
2025-11-01 01:01:34 +08:00 · 2015-09-10 10:58:09 +02:00
parent a1ca0d46ac
commit 295f901800
19 changed files with 7 additions and 40647 deletions
--- a/44
+++ b/44
@@ -1,44 +0,0 @@
 HowTo Build Minix Editline
 ==========================
 Minix editline makes use of GNU configure tools, which includes autoconf, automake
 and libtool. This enables high levels of portability and ease of use In most cases
 all you need to do is unpack the tarball, enter the directory and type:
    ./configure
 There are are, however, more options available.  For instance, sometimes it is useful
 to build editline as a static library, type:
    ./configure --disable-shared
 By default editline employs a default handler for the TAB key, pressing it once
 completes to the nearest matching filename in the current working directory, or it
 can display a listing of possible completions.  For some uses this default is not
 desirable at all, type:
    ./configure --disable-default-complete
 An even more common desire is to change the default install location.  By default all
 configure scripts setup /usr/local as the install "prefix", to change this type:
    ./configure --prefix=/home/troglobit/tmp
 Advanced users are encouraged to read up on --libdir, --mandir, etc. in the GNU
 Configure and Build System.
 For more available options, type:
    ./configure --help
 To build and install, simply type:
    make
 followed by
    sudo make install
 Good Luck!
     //Joachim
--- a/Makefile.in
+++ b/Makefile.in
@@ -1,825 +0,0 @@
 # Makefile.in generated by automake 1.11.6 from Makefile.am.
 # @configure_input@
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
 # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
 # Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
@SET_MAKE@
 VPATH = @srcdir@
 am__make_dryrun = \
  { \
    am__dry=no; \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
      *) \
        for am__flg in $$MAKEFLAGS; do \
          case $$am__flg in \
            *=*|--*) ;; \
            *n*) am__dry=yes; break;; \
          esac; \
        done;; \
    esac; \
    test $$am__dry = yes; \
  }
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
 pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
 install_sh_SCRIPT = $(install_sh) -c
 INSTALL_HEADER = $(INSTALL_DATA)
 transform = $(program_transform_name)
 NORMAL_INSTALL = :
 PRE_INSTALL = :
 POST_INSTALL = :
 NORMAL_UNINSTALL = :
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
 subdir = .
 DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
 	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
 	$(top_srcdir)/configure INSTALL TODO config.guess config.sub \
 	depcomp install-sh ltmain.sh missing
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
 	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
 	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
 AM_V_GEN = $(am__v_GEN_@AM_V@)
 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 am__v_GEN_0 = @echo "  GEN   " $@;
 AM_V_at = $(am__v_at_@AM_V@)
 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 am__v_at_0 = @
 SOURCES =
 DIST_SOURCES =
 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
 	html-recursive info-recursive install-data-recursive \
 	install-dvi-recursive install-exec-recursive \
 	install-html-recursive install-info-recursive \
 	install-pdf-recursive install-ps-recursive install-recursive \
 	installcheck-recursive installdirs-recursive pdf-recursive \
 	ps-recursive uninstall-recursive
 am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
 am__install_max = 40
 am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
 am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
 am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
 am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
 am__installdirs = "$(DESTDIR)$(docdir)"
 DATA = $(doc_DATA)
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
 	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
 	distdir dist dist-all distcheck
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = $(SUBDIRS)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
 am__remove_distdir = \
  if test -d "$(distdir)"; then \
    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
      && rm -rf "$(distdir)" \
      || { sleep 5 && rm -rf "$(distdir)"; }; \
  else :; fi
 am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
 GZIP_ENV = --best
 DIST_ARCHIVES = $(distdir).tar.xz
 distuninstallcheck_listfiles = find . -type f -print
 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
 distcleancheck_listfiles = find . -type f -print
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
 AM_CFLAGS = @AM_CFLAGS@
 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AR = @AR@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
 AUTOMAKE = @AUTOMAKE@
 AWK = @AWK@
 CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
 DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 GREP = @GREP@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBTOOL = @LIBTOOL@
 LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
 NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
 OTOOL = @OTOOL@
 OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
 SED = @SED@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
 abs_builddir = @abs_builddir@
 abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
 am__tar = @am__tar@
 am__untar = @am__untar@
 bindir = @bindir@
 build = @build@
 build_alias = @build_alias@
 build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
 builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
 docdir = @docdir@
 dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 host = @host@
 host_alias = @host_alias@
 host_cpu = @host_cpu@
 host_os = @host_os@
 host_vendor = @host_vendor@
 htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
 top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
 AUTOMAKE_OPTIONS = foreign
 ACLOCAL_AMFLAGS = -I m4
 doc_DATA = README LICENSE CHANGELOG
 EXTRA_DIST = LICENSE CHANGELOG
 SUBDIRS = src include man examples
 all: config.h
 	$(MAKE) $(AM_MAKEFLAGS) all-recursive
 .SUFFIXES:
 am--refresh: Makefile
 	@:
 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
 	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
 	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
 		&& exit 0; \
 	      exit 1;; \
 	  esac; \
 	done; \
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --foreign Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
 	    echo ' $(SHELL) ./config.status'; \
 	    $(SHELL) ./config.status;; \
 	  *) \
 	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
 	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
 	esac;
 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 	$(SHELL) ./config.status --recheck
 $(top_srcdir)/configure:  $(am__configure_deps)
 	$(am__cd) $(srcdir) && $(AUTOCONF)
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 $(am__aclocal_m4_deps):
 config.h: stamp-h1
 	@if test ! -f $@; then rm -f stamp-h1; else :; fi
 	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
 	@rm -f stamp-h1
 	cd $(top_builddir) && $(SHELL) ./config.status config.h
 $(srcdir)/config.h.in:  $(am__configure_deps) 
 	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
 	rm -f stamp-h1
 	touch $@
 distclean-hdr:
 	-rm -f config.h stamp-h1
 mostlyclean-libtool:
 	-rm -f *.lo
 clean-libtool:
 	-rm -rf .libs _libs
 distclean-libtool:
 	-rm -f libtool config.lt
 install-docDATA: $(doc_DATA)
 	@$(NORMAL_INSTALL)
 	@list='$(doc_DATA)'; test -n "$(docdir)" || list=; \
 	if test -n "$$list"; then \
 	  echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \
 	  $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \
 	fi; \
 	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  echo "$$d$$p"; \
 	done | $(am__base_list) | \
 	while read files; do \
 	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
 	  $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
 	done
 uninstall-docDATA:
 	@$(NORMAL_UNINSTALL)
 	@list='$(doc_DATA)'; test -n "$(docdir)" || list=; \
 	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 	dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir)
 # This directory's subdirectories are mostly independent; you can cd
 # into them and run `make' without going through this Makefile.
 # To change the values of `make' variables: instead of editing Makefiles,
 # (1) if the variable is set in `config.status', edit `config.status'
 #     (which will cause the Makefiles to be regenerated when you run `make');
 # (2) otherwise, pass the desired values on the `make' command line.
 $(RECURSIVE_TARGETS):
 	@fail= failcom='exit 1'; \
 	for f in x $$MAKEFLAGS; do \
 	  case $$f in \
 	    *=* | --[!k]*);; \
 	    *k*) failcom='fail=yes';; \
 	  esac; \
 	done; \
 	dot_seen=no; \
 	target=`echo $@ | sed s/-recursive//`; \
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  echo "Making $$target in $$subdir"; \
 	  if test "$$subdir" = "."; then \
 	    dot_seen=yes; \
 	    local_target="$$target-am"; \
 	  else \
 	    local_target="$$target"; \
 	  fi; \
 	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 	fi; test -z "$$fail"
 $(RECURSIVE_CLEAN_TARGETS):
 	@fail= failcom='exit 1'; \
 	for f in x $$MAKEFLAGS; do \
 	  case $$f in \
 	    *=* | --[!k]*);; \
 	    *k*) failcom='fail=yes';; \
 	  esac; \
 	done; \
 	dot_seen=no; \
 	case "$@" in \
 	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 	  *) list='$(SUBDIRS)' ;; \
 	esac; \
 	rev=''; for subdir in $$list; do \
 	  if test "$$subdir" = "."; then :; else \
 	    rev="$$subdir $$rev"; \
 	  fi; \
 	done; \
 	rev="$$rev ."; \
 	target=`echo $@ | sed s/-recursive//`; \
 	for subdir in $$rev; do \
 	  echo "Making $$target in $$subdir"; \
 	  if test "$$subdir" = "."; then \
 	    local_target="$$target-am"; \
 	  else \
 	    local_target="$$target"; \
 	  fi; \
 	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 	done
 ctags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
 	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 	  include_option=--etags-include; \
 	  empty_fix=.; \
 	else \
 	  include_option=--include; \
 	  empty_fix=; \
 	fi; \
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test ! -f $$subdir/TAGS || \
 	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
 	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	shift; \
 	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
 	  if test $$# -gt 0; then \
 	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 	      "$$@" $$unique; \
 	  else \
 	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 	      $$unique; \
 	  fi; \
 	fi
 ctags: CTAGS
 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
 	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 	     $$unique
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
 	  && $(am__cd) $(top_srcdir) \
 	  && gtags -i $(GTAGS_ARGS) "$$here"
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 distdir: $(DISTFILES)
 	$(am__remove_distdir)
 	test -d "$(distdir)" || mkdir "$(distdir)"
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	list='$(DISTFILES)'; \
 	  dist_files=`for file in $$list; do echo $$file; done | \
 	  sed -e "s|^$$srcdirstrip/||;t" \
 	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 	case $$dist_files in \
 	  */*) $(MKDIR_P) `echo "$$dist_files" | \
 			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 			   sort -u` ;; \
 	esac; \
 	for file in $$dist_files; do \
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 	    if test -d "$(distdir)/$$file"; then \
 	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
 	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
 	    test -f "$(distdir)/$$file" \
 	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
 	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    $(am__make_dryrun) \
 	      || test -d "$(distdir)/$$subdir" \
 	      || $(MKDIR_P) "$(distdir)/$$subdir" \
 	      || exit 1; \
 	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 	    $(am__relativize); \
 	    new_distdir=$$reldir; \
 	    dir1=$$subdir; dir2="$(top_distdir)"; \
 	    $(am__relativize); \
 	    new_top_distdir=$$reldir; \
 	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
 	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
 	    ($(am__cd) $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
 	        top_distdir="$$new_top_distdir" \
 	        distdir="$$new_distdir" \
 		am__remove_distdir=: \
 		am__skip_length_check=: \
 		am__skip_mode_fix=: \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
 	done
 	-test -n "$(am__skip_mode_fix)" \
 	|| find "$(distdir)" -type d ! -perm -755 \
 		-exec chmod u+rwx,go+rx {} \; -o \
 	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
 	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
 	|| chmod -R a+r "$(distdir)"
 dist-gzip: distdir
 	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 	$(am__remove_distdir)
 dist-bzip2: distdir
 	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
 	$(am__remove_distdir)
 dist-lzip: distdir
 	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
 	$(am__remove_distdir)
 dist-lzma: distdir
 	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
 	$(am__remove_distdir)
 dist-xz: distdir
 	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
 	$(am__remove_distdir)
 dist-tarZ: distdir
 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 	$(am__remove_distdir)
 dist-shar: distdir
 	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
 	$(am__remove_distdir)
 dist-zip: distdir
 	-rm -f $(distdir).zip
 	zip -rq $(distdir).zip $(distdir)
 	$(am__remove_distdir)
 dist dist-all: distdir
 	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
 	$(am__remove_distdir)
 # This target untars the dist file and tries a VPATH configuration.  Then
 # it guarantees that the distribution is self-contained by making another
 # tarfile.
 distcheck: dist
 	case '$(DIST_ARCHIVES)' in \
 	*.tar.gz*) \
 	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
 	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
 	*.tar.lzma*) \
 	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
 	*.tar.lz*) \
 	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
 	*.tar.xz*) \
 	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
 	*.tar.Z*) \
 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 	*.shar.gz*) \
 	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
 	*.zip*) \
 	  unzip $(distdir).zip ;;\
 	esac
 	chmod -R a-w $(distdir); chmod u+w $(distdir)
 	mkdir $(distdir)/_build
 	mkdir $(distdir)/_inst
 	chmod a-w $(distdir)
 	test -d $(distdir)/_build || exit 0; \
 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
 	  && am__cwd=`pwd` \
 	  && $(am__cd) $(distdir)/_build \
 	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
 	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
 	    $(DISTCHECK_CONFIGURE_FLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
 	  && $(MAKE) $(AM_MAKEFLAGS) check \
 	  && $(MAKE) $(AM_MAKEFLAGS) install \
 	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
 	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
 	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
 	        distuninstallcheck \
 	  && chmod -R a-w "$$dc_install_base" \
 	  && ({ \
 	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
 	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
 	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
 	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
 	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
 	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
 	  && rm -rf "$$dc_destdir" \
 	  && $(MAKE) $(AM_MAKEFLAGS) dist \
 	  && rm -rf $(DIST_ARCHIVES) \
 	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
 	  && cd "$$am__cwd" \
 	  || exit 1
 	$(am__remove_distdir)
 	@(echo "$(distdir) archives ready for distribution: "; \
 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 distuninstallcheck:
 	@test -n '$(distuninstallcheck_dir)' || { \
 	  echo 'ERROR: trying to run $@ with an empty' \
 	       '$$(distuninstallcheck_dir)' >&2; \
 	  exit 1; \
 	}; \
 	$(am__cd) '$(distuninstallcheck_dir)' || { \
 	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
 	  exit 1; \
 	}; \
 	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
 	   || { echo "ERROR: files left after uninstall:" ; \
 	        if test -n "$(DESTDIR)"; then \
 	          echo "  (check DESTDIR support)"; \
 	        fi ; \
 	        $(distuninstallcheck_listfiles) ; \
 	        exit 1; } >&2
 distcleancheck: distclean
 	@if test '$(srcdir)' = . ; then \
 	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
 	  exit 1 ; \
 	fi
 	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
 	  || { echo "ERROR: files left in build directory after distclean:" ; \
 	       $(distcleancheck_listfiles) ; \
 	       exit 1; } >&2
 check-am: all-am
 check: check-recursive
 all-am: Makefile $(DATA) config.h
 installdirs: installdirs-recursive
 installdirs-am:
 	for dir in "$(DESTDIR)$(docdir)"; do \
 	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-recursive
 install-exec: install-exec-recursive
 install-data: install-data-recursive
 uninstall: uninstall-recursive
 install-am: all-am
 	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 installcheck: installcheck-recursive
 install-strip:
 	if test -z '$(STRIP)'; then \
 	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 	      install; \
 	else \
 	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
 	fi
 mostlyclean-generic:
 clean-generic:
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
 	@echo "it deletes files that may require special tools to rebuild."
 clean: clean-recursive
 clean-am: clean-generic clean-libtool mostlyclean-am
 distclean: distclean-recursive
 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
 	-rm -f Makefile
 distclean-am: clean-am distclean-generic distclean-hdr \
 	distclean-libtool distclean-tags
 dvi: dvi-recursive
 dvi-am:
 html: html-recursive
 html-am:
 info: info-recursive
 info-am:
 install-data-am: install-docDATA
 install-dvi: install-dvi-recursive
 install-dvi-am:
 install-exec-am:
 install-html: install-html-recursive
 install-html-am:
 install-info: install-info-recursive
 install-info-am:
 install-man:
 install-pdf: install-pdf-recursive
 install-pdf-am:
 install-ps: install-ps-recursive
 install-ps-am:
 installcheck-am:
 maintainer-clean: maintainer-clean-recursive
 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
 	-rm -rf $(top_srcdir)/autom4te.cache
 	-rm -f Makefile
 maintainer-clean-am: distclean-am maintainer-clean-generic
 mostlyclean: mostlyclean-recursive
 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 pdf: pdf-recursive
 pdf-am:
 ps: ps-recursive
 ps-am:
 uninstall-am: uninstall-docDATA
 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
 	ctags-recursive install-am install-strip tags-recursive
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 	all all-am am--refresh check check-am clean clean-generic \
 	clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
 	dist-gzip dist-lzip dist-lzma dist-shar dist-tarZ dist-xz \
 	dist-zip distcheck distclean distclean-generic distclean-hdr \
 	distclean-libtool distclean-tags distcleancheck distdir \
 	distuninstallcheck dvi dvi-am html html-am info info-am \
 	install install-am install-data install-data-am \
 	install-docDATA install-dvi install-dvi-am install-exec \
 	install-exec-am install-html install-html-am install-info \
 	install-info-am install-man install-pdf install-pdf-am \
 	install-ps install-ps-am install-strip installcheck \
 	installcheck-am installdirs installdirs-am maintainer-clean \
 	maintainer-clean-generic mostlyclean mostlyclean-generic \
 	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
 	uninstall uninstall-am uninstall-docDATA
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
--- a/aclocal.m4
+++ b/aclocal.m4
--- a/autogen.sh
+++ b/autogen.sh
@@ -0,0 +1,7 @@
 #!/bin/sh
 # Use v1.11 for backwards compat with Ubuntu 12.04 LTS
 export ACLOCAL=aclocal-1.11
 export AUTOMAKE=automake-1.11
 autoreconf -W portability -visfm
--- a/config.guess
+++ b/config.guess
--- a/config.h.in
+++ b/config.h.in
@@ -1,157 +0,0 @@
 /* config.h.in.  Generated from configure.ac by autoheader.  */
 /* Define to 1 if the `closedir' function returns void instead of `int'. */
 #undef CLOSEDIR_VOID
 /* Define to include ANSI arrow keys support. */
 #undef CONFIG_ANSI_ARROWS
 /* Define to enable the default completion handler. */
 #undef CONFIG_DEFAULT_COMPLETE
 /* Define to enable EOF (Ctrl-C) key. */
 #undef CONFIG_EOF
 /* Define to enable SIGINT (Ctrl-C) key. */
 #undef CONFIG_SIGINT
 /* Define to enable SIGSTOP (Ctrl-Z) key. */
 #undef CONFIG_SIGSTOP
 /* Define to enable terminal bell on completion. */
 #undef CONFIG_TERMINAL_BELL
 /* Define to skip duplicate lines in the scrollback history. */
 #undef CONFIG_UNIQUE_HISTORY
 /* Define to use the termcap library for terminal size. */
 #undef CONFIG_USE_TERMCAP
 /* Define to 1 if `TIOCGWINSZ' requires <sys/ioctl.h>. */
 #undef GWINSZ_IN_SYS_IOCTL
 /* Define to 1 if you have the <dirent.h> header file, and it defines `DIR'.
   */
 #undef HAVE_DIRENT_H
 /* Define to 1 if you have the <dlfcn.h> header file. */
 #undef HAVE_DLFCN_H
 /* Define to 1 if you have the <inttypes.h> header file. */
 #undef HAVE_INTTYPES_H
 /* Define to 1 if you have the <malloc.h> header file. */
 #undef HAVE_MALLOC_H
 /* Define to 1 if you have the <memory.h> header file. */
 #undef HAVE_MEMORY_H
 /* Define to 1 if you have the <ndir.h> header file, and it defines `DIR'. */
 #undef HAVE_NDIR_H
 /* Define to 1 if you have the `perror' function. */
 #undef HAVE_PERROR
 /* Define to 1 if you have the <sgtty.h> header file. */
 #undef HAVE_SGTTY_H
 /* Define to 1 if you have the <signal.h> header file. */
 #undef HAVE_SIGNAL_H
 /* Define to 1 if `stat' has the bug that it succeeds when given the
   zero-length file name argument. */
 #undef HAVE_STAT_EMPTY_STRING_BUG
 /* Define to 1 if you have the <stdint.h> header file. */
 #undef HAVE_STDINT_H
 /* Define to 1 if you have the <stdlib.h> header file. */
 #undef HAVE_STDLIB_H
 /* Define to 1 if you have the `strchr' function. */
 #undef HAVE_STRCHR
 /* Define to 1 if you have the `strdup' function. */
 #undef HAVE_STRDUP
 /* Define to 1 if you have the <strings.h> header file. */
 #undef HAVE_STRINGS_H
 /* Define to 1 if you have the <string.h> header file. */
 #undef HAVE_STRING_H
 /* Define to 1 if you have the `strrchr' function. */
 #undef HAVE_STRRCHR
 /* Define to 1 if you have the <sys/dir.h> header file, and it defines `DIR'.
   */
 #undef HAVE_SYS_DIR_H
 /* Define to 1 if you have the <sys/ndir.h> header file, and it defines `DIR'.
   */
 #undef HAVE_SYS_NDIR_H
 /* Define to 1 if you have the <sys/stat.h> header file. */
 #undef HAVE_SYS_STAT_H
 /* Define to 1 if you have the <sys/types.h> header file. */
 #undef HAVE_SYS_TYPES_H
 /* Define to 1 if you have the `tcgetattr' function. */
 #undef HAVE_TCGETATTR
 /* Define to 1 if you have the <termcap.h> header file. */
 #undef HAVE_TERMCAP_H
 /* Define to 1 if you have the <termios.h> header file. */
 #undef HAVE_TERMIOS_H
 /* Define to 1 if you have the <termio.h> header file. */
 #undef HAVE_TERMIO_H
 /* Define to 1 if you have the <unistd.h> header file. */
 #undef HAVE_UNISTD_H
 /* Define to 1 if `lstat' dereferences a symlink specified with a trailing
   slash. */
 #undef LSTAT_FOLLOWS_SLASHED_SYMLINK
 /* Define to the sub-directory in which libtool stores uninstalled libraries.
   */
 #undef LT_OBJDIR
 /* Name of package */
 #undef PACKAGE
 /* Define to the address where bug reports for this package should be sent. */
 #undef PACKAGE_BUGREPORT
 /* Define to the full name of this package. */
 #undef PACKAGE_NAME
 /* Define to the full name and version of this package. */
 #undef PACKAGE_STRING
 /* Define to the one symbol short name of this package. */
 #undef PACKAGE_TARNAME
 /* Define to the home page for this package. */
 #undef PACKAGE_URL
 /* Define to the version of this package. */
 #undef PACKAGE_VERSION
 /* Define to 1 if the `S_IS*' macros in <sys/stat.h> do not work properly. */
 #undef STAT_MACROS_BROKEN
 /* Define to 1 if you have the ANSI C header files. */
 #undef STDC_HEADERS
 /* Default to UNIX backend, should be detected. */
 #undef SYS_UNIX
 /* Version number of package */
 #undef VERSION
 /* Define to `unsigned int' if <sys/types.h> does not define. */
 #undef size_t
--- a/config.sub
+++ b/config.sub
--- a/14459
+++ b/14459
--- a/589
+++ b/589
@@ -1,589 +0,0 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
 scriptversion=2007-03-29.01
 # Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007 Free Software
 # Foundation, Inc.
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
 # the Free Software Foundation; either version 2, or (at your option)
 # any later version.
 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
 # 02110-1301, USA.
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
 # the same distribution terms that you use for the rest of that program.
 # Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
 case $1 in
  '')
     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
     exit 1;
     ;;
  -h | --h*)
    cat <<\EOF
 Usage: depcomp [--help] [--version] PROGRAM [ARGS]
 Run PROGRAMS ARGS to compile a file, generating dependencies
 as side-effects.
 Environment variables:
  depmode     Dependency tracking mode.
  source      Source file read by `PROGRAMS ARGS'.
  object      Object file output by `PROGRAMS ARGS'.
  DEPDIR      directory where to store dependencies.
  depfile     Dependency file to output.
  tmpdepfile  Temporary file to use when outputing dependencies.
  libtool     Whether libtool is used (yes/no).
 Report bugs to <bug-automake@gnu.org>.
 EOF
    exit $?
    ;;
  -v | --v*)
    echo "depcomp $scriptversion"
    exit $?
    ;;
 esac
 if test -z "$depmode" || test -z "$source" || test -z "$object"; then
  echo "depcomp: Variables source, object and depmode must be set" 1>&2
  exit 1
 fi
 # Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
 depfile=${depfile-`echo "$object" |
  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
 tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
 rm -f "$tmpdepfile"
 # Some modes work just like other modes, but use different flags.  We
 # parameterize here, but still list the modes in the big case below,
 # to make depend.m4 easier to write.  Note that we *cannot* use a case
 # here, because this file can only contain one case statement.
 if test "$depmode" = hp; then
  # HP compiler uses -M and no extra arg.
  gccflag=-M
  depmode=gcc
 fi
 if test "$depmode" = dashXmstdout; then
   # This is just like dashmstdout with a different argument.
   dashmflag=-xM
   depmode=dashmstdout
 fi
 case "$depmode" in
 gcc3)
 ## gcc 3 implements dependency tracking that does exactly what
 ## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
 ## it if -MD -MP comes after the -MF stuff.  Hmm.
 ## Unfortunately, FreeBSD c89 acceptance of flags depends upon
 ## the command line argument order; so add the flags where they
 ## appear in depend2.am.  Note that the slowdown incurred here
 ## affects only configure: in makefiles, %FASTDEP% shortcuts this.
  for arg
  do
    case $arg in
    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
    *)  set fnord "$@" "$arg" ;;
    esac
    shift # fnord
    shift # $arg
  done
  "$@"
  stat=$?
  if test $stat -eq 0; then :
  else
    rm -f "$tmpdepfile"
    exit $stat
  fi
  mv "$tmpdepfile" "$depfile"
  ;;
 gcc)
 ## There are various ways to get dependency output from gcc.  Here's
 ## why we pick this rather obscure method:
 ## - Don't want to use -MD because we'd like the dependencies to end
 ##   up in a subdir.  Having to rename by hand is ugly.
 ##   (We might end up doing this anyway to support other compilers.)
 ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
 ##   -MM, not -M (despite what the docs say).
 ## - Using -M directly means running the compiler twice (even worse
 ##   than renaming).
  if test -z "$gccflag"; then
    gccflag=-MD,
  fi
  "$@" -Wp,"$gccflag$tmpdepfile"
  stat=$?
  if test $stat -eq 0; then :
  else
    rm -f "$tmpdepfile"
    exit $stat
  fi
  rm -f "$depfile"
  echo "$object : \\" > "$depfile"
  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
 ## The second -e expression handles DOS-style file names with drive letters.
  sed -e 's/^[^:]*: / /' \
      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
 ## This next piece of magic avoids the `deleted header file' problem.
 ## The problem is that when a header file which appears in a .P file
 ## is deleted, the dependency causes make to die (because there is
 ## typically no way to rebuild the header).  We avoid this by adding
 ## dummy dependencies for each header file.  Too bad gcc doesn't do
 ## this for us directly.
  tr ' ' '
 ' < "$tmpdepfile" |
 ## Some versions of gcc put a space before the `:'.  On the theory
 ## that the space means something, we add a space to the output as
 ## well.
 ## Some versions of the HPUX 10.20 sed can't process this invocation
 ## correctly.  Breaking it into two sed invocations is a workaround.
    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
  rm -f "$tmpdepfile"
  ;;
 hp)
  # This case exists only to let depend.m4 do its work.  It works by
  # looking at the text of this script.  This case will never be run,
  # since it is checked for above.
  exit 1
  ;;
 sgi)
  if test "$libtool" = yes; then
    "$@" "-Wp,-MDupdate,$tmpdepfile"
  else
    "$@" -MDupdate "$tmpdepfile"
  fi
  stat=$?
  if test $stat -eq 0; then :
  else
    rm -f "$tmpdepfile"
    exit $stat
  fi
  rm -f "$depfile"
  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
    echo "$object : \\" > "$depfile"
    # Clip off the initial element (the dependent).  Don't try to be
    # clever and replace this with sed code, as IRIX sed won't handle
    # lines with more than a fixed number of characters (4096 in
    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
    # the IRIX cc adds comments like `#:fec' to the end of the
    # dependency line.
    tr ' ' '
 ' < "$tmpdepfile" \
    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
    tr '
 ' ' ' >> $depfile
    echo >> $depfile
    # The second pass generates a dummy entry for each header file.
    tr ' ' '
 ' < "$tmpdepfile" \
   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
   >> $depfile
  else
    # The sourcefile does not contain any dependencies, so just
    # store a dummy comment line, to avoid errors with the Makefile
    # "include basename.Plo" scheme.
    echo "#dummy" > "$depfile"
  fi
  rm -f "$tmpdepfile"
  ;;
 aix)
  # The C for AIX Compiler uses -M and outputs the dependencies
  # in a .u file.  In older versions, this file always lives in the
  # current directory.  Also, the AIX compiler puts `$object:' at the
  # start of each line; $object doesn't have directory information.
  # Version 6 uses the directory in both cases.
  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
  test "x$dir" = "x$object" && dir=
  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
  if test "$libtool" = yes; then
    tmpdepfile1=$dir$base.u
    tmpdepfile2=$base.u
    tmpdepfile3=$dir.libs/$base.u
    "$@" -Wc,-M
  else
    tmpdepfile1=$dir$base.u
    tmpdepfile2=$dir$base.u
    tmpdepfile3=$dir$base.u
    "$@" -M
  fi
  stat=$?
  if test $stat -eq 0; then :
  else
    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
    exit $stat
  fi
  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
  do
    test -f "$tmpdepfile" && break
  done
  if test -f "$tmpdepfile"; then
    # Each line is of the form `foo.o: dependent.h'.
    # Do two passes, one to just change these to
    # `$object: dependent.h' and one to simply `dependent.h:'.
    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
    # That's a tab and a space in the [].
    sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
  else
    # The sourcefile does not contain any dependencies, so just
    # store a dummy comment line, to avoid errors with the Makefile
    # "include basename.Plo" scheme.
    echo "#dummy" > "$depfile"
  fi
  rm -f "$tmpdepfile"
  ;;
 icc)
  # Intel's C compiler understands `-MD -MF file'.  However on
  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
  # ICC 7.0 will fill foo.d with something like
  #    foo.o: sub/foo.c
  #    foo.o: sub/foo.h
  # which is wrong.  We want:
  #    sub/foo.o: sub/foo.c
  #    sub/foo.o: sub/foo.h
  #    sub/foo.c:
  #    sub/foo.h:
  # ICC 7.1 will output
  #    foo.o: sub/foo.c sub/foo.h
  # and will wrap long lines using \ :
  #    foo.o: sub/foo.c ... \
  #     sub/foo.h ... \
  #     ...
  "$@" -MD -MF "$tmpdepfile"
  stat=$?
  if test $stat -eq 0; then :
  else
    rm -f "$tmpdepfile"
    exit $stat
  fi
  rm -f "$depfile"
  # Each line is of the form `foo.o: dependent.h',
  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
  # Do two passes, one to just change these to
  # `$object: dependent.h' and one to simply `dependent.h:'.
  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
  # Some versions of the HPUX 10.20 sed can't process this invocation
  # correctly.  Breaking it into two sed invocations is a workaround.
  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
    sed -e 's/$/ :/' >> "$depfile"
  rm -f "$tmpdepfile"
  ;;
 hp2)
  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
  # compilers, which have integrated preprocessors.  The correct option
  # to use with these is +Maked; it writes dependencies to a file named
  # 'foo.d', which lands next to the object file, wherever that
  # happens to be.
  # Much of this is similar to the tru64 case; see comments there.
  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
  test "x$dir" = "x$object" && dir=
  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
  if test "$libtool" = yes; then
    tmpdepfile1=$dir$base.d
    tmpdepfile2=$dir.libs/$base.d
    "$@" -Wc,+Maked
  else
    tmpdepfile1=$dir$base.d
    tmpdepfile2=$dir$base.d
    "$@" +Maked
  fi
  stat=$?
  if test $stat -eq 0; then :
  else
     rm -f "$tmpdepfile1" "$tmpdepfile2"
     exit $stat
  fi
  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
  do
    test -f "$tmpdepfile" && break
  done
  if test -f "$tmpdepfile"; then
    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
    # Add `dependent.h:' lines.
    sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile"
  else
    echo "#dummy" > "$depfile"
  fi
  rm -f "$tmpdepfile" "$tmpdepfile2"
  ;;
 tru64)
   # The Tru64 compiler uses -MD to generate dependencies as a side
   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
   # dependencies in `foo.d' instead, so we check for that too.
   # Subdirectories are respected.
   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
   test "x$dir" = "x$object" && dir=
   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
   if test "$libtool" = yes; then
      # With Tru64 cc, shared objects can also be used to make a
      # static library.  This mechanism is used in libtool 1.4 series to
      # handle both shared and static libraries in a single compilation.
      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
      #
      # With libtool 1.5 this exception was removed, and libtool now
      # generates 2 separate objects for the 2 libraries.  These two
      # compilations output dependencies in $dir.libs/$base.o.d and
      # in $dir$base.o.d.  We have to check for both files, because
      # one of the two compilations can be disabled.  We should prefer
      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
      # automatically cleaned when .libs/ is deleted, while ignoring
      # the former would cause a distcleancheck panic.
      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
      tmpdepfile2=$dir$base.o.d          # libtool 1.5
      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
      "$@" -Wc,-MD
   else
      tmpdepfile1=$dir$base.o.d
      tmpdepfile2=$dir$base.d
      tmpdepfile3=$dir$base.d
      tmpdepfile4=$dir$base.d
      "$@" -MD
   fi
   stat=$?
   if test $stat -eq 0; then :
   else
      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
      exit $stat
   fi
   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
   do
     test -f "$tmpdepfile" && break
   done
   if test -f "$tmpdepfile"; then
      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
      # That's a tab and a space in the [].
      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
   else
      echo "#dummy" > "$depfile"
   fi
   rm -f "$tmpdepfile"
   ;;
 #nosideeffect)
  # This comment above is used by automake to tell side-effect
  # dependency tracking mechanisms from slower ones.
 dashmstdout)
  # Important note: in order to support this mode, a compiler *must*
  # always write the preprocessed file to stdout, regardless of -o.
  "$@" || exit $?
  # Remove the call to Libtool.
  if test "$libtool" = yes; then
    while test $1 != '--mode=compile'; do
      shift
    done
    shift
  fi
  # Remove `-o $object'.
  IFS=" "
  for arg
  do
    case $arg in
    -o)
      shift
      ;;
    $object)
      shift
      ;;
    *)
      set fnord "$@" "$arg"
      shift # fnord
      shift # $arg
      ;;
    esac
  done
  test -z "$dashmflag" && dashmflag=-M
  # Require at least two characters before searching for `:'
  # in the target name.  This is to cope with DOS-style filenames:
  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
  "$@" $dashmflag |
    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
  rm -f "$depfile"
  cat < "$tmpdepfile" > "$depfile"
  tr ' ' '
 ' < "$tmpdepfile" | \
 ## Some versions of the HPUX 10.20 sed can't process this invocation
 ## correctly.  Breaking it into two sed invocations is a workaround.
    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
  rm -f "$tmpdepfile"
  ;;
 dashXmstdout)
  # This case only exists to satisfy depend.m4.  It is never actually
  # run, as this mode is specially recognized in the preamble.
  exit 1
  ;;
 makedepend)
  "$@" || exit $?
  # Remove any Libtool call
  if test "$libtool" = yes; then
    while test $1 != '--mode=compile'; do
      shift
    done
    shift
  fi
  # X makedepend
  shift
  cleared=no
  for arg in "$@"; do
    case $cleared in
    no)
      set ""; shift
      cleared=yes ;;
    esac
    case "$arg" in
    -D*|-I*)
      set fnord "$@" "$arg"; shift ;;
    # Strip any option that makedepend may not understand.  Remove
    # the object too, otherwise makedepend will parse it as a source file.
    -*|$object)
      ;;
    *)
      set fnord "$@" "$arg"; shift ;;
    esac
  done
  obj_suffix="`echo $object | sed 's/^.*\././'`"
  touch "$tmpdepfile"
  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
  rm -f "$depfile"
  cat < "$tmpdepfile" > "$depfile"
  sed '1,2d' "$tmpdepfile" | tr ' ' '
 ' | \
 ## Some versions of the HPUX 10.20 sed can't process this invocation
 ## correctly.  Breaking it into two sed invocations is a workaround.
    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
  rm -f "$tmpdepfile" "$tmpdepfile".bak
  ;;
 cpp)
  # Important note: in order to support this mode, a compiler *must*
  # always write the preprocessed file to stdout.
  "$@" || exit $?
  # Remove the call to Libtool.
  if test "$libtool" = yes; then
    while test $1 != '--mode=compile'; do
      shift
    done
    shift
  fi
  # Remove `-o $object'.
  IFS=" "
  for arg
  do
    case $arg in
    -o)
      shift
      ;;
    $object)
      shift
      ;;
    *)
      set fnord "$@" "$arg"
      shift # fnord
      shift # $arg
      ;;
    esac
  done
  "$@" -E |
    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
    sed '$ s: \\$::' > "$tmpdepfile"
  rm -f "$depfile"
  echo "$object : \\" > "$depfile"
  cat < "$tmpdepfile" >> "$depfile"
  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
  rm -f "$tmpdepfile"
  ;;
 msvisualcpp)
  # Important note: in order to support this mode, a compiler *must*
  # always write the preprocessed file to stdout, regardless of -o,
  # because we must use -o when running libtool.
  "$@" || exit $?
  IFS=" "
  for arg
  do
    case "$arg" in
    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
 	set fnord "$@"
 	shift
 	shift
 	;;
    *)
 	set fnord "$@" "$arg"
 	shift
 	shift
 	;;
    esac
  done
  "$@" -E |
  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
  rm -f "$depfile"
  echo "$object : \\" > "$depfile"
  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
  echo "	" >> "$depfile"
  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
  rm -f "$tmpdepfile"
  ;;
 none)
  exec "$@"
  ;;
 *)
  echo "Unknown depmode $depmode" 1>&2
  exit 1
  ;;
 esac
 exit 0
 # Local Variables:
 # mode: shell-script
 # sh-indentation: 2
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
 # time-stamp-end: "$"
 # End:
--- a/527
+++ b/527
@@ -1,527 +0,0 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 scriptversion=2011-01-19.21; # UTC
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
 # following copyright and license.
 #
 # Copyright (C) 1994 X Consortium
 #
 # Permission is hereby granted, free of charge, to any person obtaining a copy
 # of this software and associated documentation files (the "Software"), to
 # deal in the Software without restriction, including without limitation the
 # rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
 # sell copies of the Software, and to permit persons to whom the Software is
 # furnished to do so, subject to the following conditions:
 #
 # The above copyright notice and this permission notice shall be included in
 # all copies or substantial portions of the Software.
 #
 # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
 # X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
 # AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
 # TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 #
 # Except as contained in this notice, the name of the X Consortium shall not
 # be used in advertising or otherwise to promote the sale, use or other deal-
 # ings in this Software without prior written authorization from the X Consor-
 # tium.
 #
 #
 # FSF changes to this file are in the public domain.
 #
 # Calling this script install-sh is preferred over install.sh, to prevent
 # `make' implicit rules from creating a file called install from it
 # when there is no Makefile.
 #
 # This script is compatible with the BSD install script, but was written
 # from scratch.
 nl='
 '
 IFS=" ""	$nl"
 # set DOITPROG to echo to test this script
 # Don't use :- since 4.3BSD and earlier shells don't like it.
 doit=${DOITPROG-}
 if test -z "$doit"; then
  doit_exec=exec
 else
  doit_exec=$doit
 fi
 # Put in absolute file names if you don't have them in your path;
 # or use environment vars.
 chgrpprog=${CHGRPPROG-chgrp}
 chmodprog=${CHMODPROG-chmod}
 chownprog=${CHOWNPROG-chown}
 cmpprog=${CMPPROG-cmp}
 cpprog=${CPPROG-cp}
 mkdirprog=${MKDIRPROG-mkdir}
 mvprog=${MVPROG-mv}
 rmprog=${RMPROG-rm}
 stripprog=${STRIPPROG-strip}
 posix_glob='?'
 initialize_posix_glob='
  test "$posix_glob" != "?" || {
    if (set -f) 2>/dev/null; then
      posix_glob=
    else
      posix_glob=:
    fi
  }
 '
 posix_mkdir=
 # Desired mode of installed file.
 mode=0755
 chgrpcmd=
 chmodcmd=$chmodprog
 chowncmd=
 mvcmd=$mvprog
 rmcmd="$rmprog -f"
 stripcmd=
 src=
 dst=
 dir_arg=
 dst_arg=
 copy_on_change=false
 no_target_directory=
 usage="\
 Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
   or: $0 [OPTION]... SRCFILES... DIRECTORY
   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
   or: $0 [OPTION]... -d DIRECTORIES...
 In the 1st form, copy SRCFILE to DSTFILE.
 In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
 In the 4th, create DIRECTORIES.
 Options:
     --help     display this help and exit.
     --version  display version info and exit.
  -c            (ignored)
  -C            install only if different (preserve the last data modification time)
  -d            create directories instead of installing files.
  -g GROUP      $chgrpprog installed files to GROUP.
  -m MODE       $chmodprog installed files to MODE.
  -o USER       $chownprog installed files to USER.
  -s            $stripprog installed files.
  -t DIRECTORY  install into DIRECTORY.
  -T            report an error if DSTFILE is a directory.
 Environment variables override the default commands:
  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
  RMPROG STRIPPROG
 "
 while test $# -ne 0; do
  case $1 in
    -c) ;;
    -C) copy_on_change=true;;
    -d) dir_arg=true;;
    -g) chgrpcmd="$chgrpprog $2"
 	shift;;
    --help) echo "$usage"; exit $?;;
    -m) mode=$2
 	case $mode in
 	  *' '* | *'	'* | *'
 '*	  | *'*'* | *'?'* | *'['*)
 	    echo "$0: invalid mode: $mode" >&2
 	    exit 1;;
 	esac
 	shift;;
    -o) chowncmd="$chownprog $2"
 	shift;;
    -s) stripcmd=$stripprog;;
    -t) dst_arg=$2
 	# Protect names problematic for `test' and other utilities.
 	case $dst_arg in
 	  -* | [=\(\)!]) dst_arg=./$dst_arg;;
 	esac
 	shift;;
    -T) no_target_directory=true;;
    --version) echo "$0 $scriptversion"; exit $?;;
    --)	shift
 	break;;
    -*)	echo "$0: invalid option: $1" >&2
 	exit 1;;
    *)  break;;
  esac
  shift
 done
 if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
  # When -d is used, all remaining arguments are directories to create.
  # When -t is used, the destination is already specified.
  # Otherwise, the last argument is the destination.  Remove it from $@.
  for arg
  do
    if test -n "$dst_arg"; then
      # $@ is not empty: it contains at least $arg.
      set fnord "$@" "$dst_arg"
      shift # fnord
    fi
    shift # arg
    dst_arg=$arg
    # Protect names problematic for `test' and other utilities.
    case $dst_arg in
      -* | [=\(\)!]) dst_arg=./$dst_arg;;
    esac
  done
 fi
 if test $# -eq 0; then
  if test -z "$dir_arg"; then
    echo "$0: no input file specified." >&2
    exit 1
  fi
  # It's OK to call `install-sh -d' without argument.
  # This can happen when creating conditional directories.
  exit 0
 fi
 if test -z "$dir_arg"; then
  do_exit='(exit $ret); exit $ret'
  trap "ret=129; $do_exit" 1
  trap "ret=130; $do_exit" 2
  trap "ret=141; $do_exit" 13
  trap "ret=143; $do_exit" 15
  # Set umask so as not to create temps with too-generous modes.
  # However, 'strip' requires both read and write access to temps.
  case $mode in
    # Optimize common cases.
    *644) cp_umask=133;;
    *755) cp_umask=22;;
    *[0-7])
      if test -z "$stripcmd"; then
 	u_plus_rw=
      else
 	u_plus_rw='% 200'
      fi
      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
    *)
      if test -z "$stripcmd"; then
 	u_plus_rw=
      else
 	u_plus_rw=,u+rw
      fi
      cp_umask=$mode$u_plus_rw;;
  esac
 fi
 for src
 do
  # Protect names problematic for `test' and other utilities.
  case $src in
    -* | [=\(\)!]) src=./$src;;
  esac
  if test -n "$dir_arg"; then
    dst=$src
    dstdir=$dst
    test -d "$dstdir"
    dstdir_status=$?
  else
    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
    # might cause directories to be created, which would be especially bad
    # if $src (and thus $dsttmp) contains '*'.
    if test ! -f "$src" && test ! -d "$src"; then
      echo "$0: $src does not exist." >&2
      exit 1
    fi
    if test -z "$dst_arg"; then
      echo "$0: no destination specified." >&2
      exit 1
    fi
    dst=$dst_arg
    # If destination is a directory, append the input filename; won't work
    # if double slashes aren't ignored.
    if test -d "$dst"; then
      if test -n "$no_target_directory"; then
 	echo "$0: $dst_arg: Is a directory" >&2
 	exit 1
      fi
      dstdir=$dst
      dst=$dstdir/`basename "$src"`
      dstdir_status=0
    else
      # Prefer dirname, but fall back on a substitute if dirname fails.
      dstdir=`
 	(dirname "$dst") 2>/dev/null ||
 	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	     X"$dst" : 'X\(//\)[^/]' \| \
 	     X"$dst" : 'X\(//\)$' \| \
 	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
 	echo X"$dst" |
 	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
 		   s//\1/
 		   q
 		 }
 		 /^X\(\/\/\)[^/].*/{
 		   s//\1/
 		   q
 		 }
 		 /^X\(\/\/\)$/{
 		   s//\1/
 		   q
 		 }
 		 /^X\(\/\).*/{
 		   s//\1/
 		   q
 		 }
 		 s/.*/./; q'
      `
      test -d "$dstdir"
      dstdir_status=$?
    fi
  fi
  obsolete_mkdir_used=false
  if test $dstdir_status != 0; then
    case $posix_mkdir in
      '')
 	# Create intermediate dirs using mode 755 as modified by the umask.
 	# This is like FreeBSD 'install' as of 1997-10-28.
 	umask=`umask`
 	case $stripcmd.$umask in
 	  # Optimize common cases.
 	  *[2367][2367]) mkdir_umask=$umask;;
 	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
 	  *[0-7])
 	    mkdir_umask=`expr $umask + 22 \
 	      - $umask % 100 % 40 + $umask % 20 \
 	      - $umask % 10 % 4 + $umask % 2
 	    `;;
 	  *) mkdir_umask=$umask,go-w;;
 	esac
 	# With -d, create the new directory with the user-specified mode.
 	# Otherwise, rely on $mkdir_umask.
 	if test -n "$dir_arg"; then
 	  mkdir_mode=-m$mode
 	else
 	  mkdir_mode=
 	fi
 	posix_mkdir=false
 	case $umask in
 	  *[123567][0-7][0-7])
 	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
 	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
 	    ;;
 	  *)
 	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
 	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
 	    if (umask $mkdir_umask &&
 		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
 	    then
 	      if test -z "$dir_arg" || {
 		   # Check for POSIX incompatibilities with -m.
 		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
 		   # other-writeable bit of parent directory when it shouldn't.
 		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
 		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
 		   case $ls_ld_tmpdir in
 		     d????-?r-*) different_mode=700;;
 		     d????-?--*) different_mode=755;;
 		     *) false;;
 		   esac &&
 		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
 		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
 		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
 		   }
 		 }
 	      then posix_mkdir=:
 	      fi
 	      rmdir "$tmpdir/d" "$tmpdir"
 	    else
 	      # Remove any dirs left behind by ancient mkdir implementations.
 	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
 	    fi
 	    trap '' 0;;
 	esac;;
    esac
    if
      $posix_mkdir && (
 	umask $mkdir_umask &&
 	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
      )
    then :
    else
      # The umask is ridiculous, or mkdir does not conform to POSIX,
      # or it failed possibly due to a race condition.  Create the
      # directory the slow way, step by step, checking for races as we go.
      case $dstdir in
 	/*) prefix='/';;
 	[-=\(\)!]*) prefix='./';;
 	*)  prefix='';;
      esac
      eval "$initialize_posix_glob"
      oIFS=$IFS
      IFS=/
      $posix_glob set -f
      set fnord $dstdir
      shift
      $posix_glob set +f
      IFS=$oIFS
      prefixes=
      for d
      do
 	test X"$d" = X && continue
 	prefix=$prefix$d
 	if test -d "$prefix"; then
 	  prefixes=
 	else
 	  if $posix_mkdir; then
 	    (umask=$mkdir_umask &&
 	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
 	    # Don't fail if two instances are running concurrently.
 	    test -d "$prefix" || exit 1
 	  else
 	    case $prefix in
 	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
 	      *) qprefix=$prefix;;
 	    esac
 	    prefixes="$prefixes '$qprefix'"
 	  fi
 	fi
 	prefix=$prefix/
      done
      if test -n "$prefixes"; then
 	# Don't fail if two instances are running concurrently.
 	(umask $mkdir_umask &&
 	 eval "\$doit_exec \$mkdirprog $prefixes") ||
 	  test -d "$dstdir" || exit 1
 	obsolete_mkdir_used=true
      fi
    fi
  fi
  if test -n "$dir_arg"; then
    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
  else
    # Make a couple of temp file names in the proper directory.
    dsttmp=$dstdir/_inst.$$_
    rmtmp=$dstdir/_rm.$$_
    # Trap to clean up those temp files at exit.
    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
    # Copy the file name to the temp name.
    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
    # and set any options; do chmod last to preserve setuid bits.
    #
    # If any of these fail, we abort the whole thing.  If we want to
    # ignore errors from any of these, just make sure not to ignore
    # errors from the above "$doit $cpprog $src $dsttmp" command.
    #
    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
    # If -C, don't bother to copy if it wouldn't change the file.
    if $copy_on_change &&
       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
       eval "$initialize_posix_glob" &&
       $posix_glob set -f &&
       set X $old && old=:$2:$4:$5:$6 &&
       set X $new && new=:$2:$4:$5:$6 &&
       $posix_glob set +f &&
       test "$old" = "$new" &&
       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
    then
      rm -f "$dsttmp"
    else
      # Rename the file to the real destination.
      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
      # The rename failed, perhaps because mv can't rename something else
      # to itself, or perhaps because mv is so ancient that it does not
      # support -f.
      {
 	# Now remove or move aside any old file at destination location.
 	# We try this two ways since rm can't unlink itself on some
 	# systems and the destination file might be busy for other
 	# reasons.  In this case, the final cleanup might fail but the new
 	# file should still install successfully.
 	{
 	  test ! -f "$dst" ||
 	  $doit $rmcmd -f "$dst" 2>/dev/null ||
 	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
 	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
 	  } ||
 	  { echo "$0: cannot unlink or rename $dst" >&2
 	    (exit 1); exit 1
 	  }
 	} &&
 	# Now rename the file to the real destination.
 	$doit $mvcmd "$dsttmp" "$dst"
      }
    fi || exit 1
    trap '' 0
  fi
 done
 # Local variables:
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
 # time-stamp-time-zone: "UTC"
 # time-stamp-end: "; # UTC"
 # End:
--- a/ltmain.sh
+++ b/ltmain.sh
--- a/m4/libtool.m4
+++ b/m4/libtool.m4
--- a/m4/ltoptions.m4
+++ b/m4/ltoptions.m4
@@ -1,384 +0,0 @@
 # Helper functions for option handling.                    -*- Autoconf -*-
 #
 #   Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
 #   Inc.
 #   Written by Gary V. Vaughan, 2004
 #
 # This file is free software; the Free Software Foundation gives
 # unlimited permission to copy and/or distribute it, with or without
 # modifications, as long as this notice is preserved.
 # serial 7 ltoptions.m4
 # This is to help aclocal find these macros, as it can't see m4_define.
 AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
 # _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
 # ------------------------------------------
 m4_define([_LT_MANGLE_OPTION],
 [[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
 # _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
 # ---------------------------------------
 # Set option OPTION-NAME for macro MACRO-NAME, and if there is a
 # matching handler defined, dispatch to it.  Other OPTION-NAMEs are
 # saved as a flag.
 m4_define([_LT_SET_OPTION],
 [m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
 m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
        _LT_MANGLE_DEFUN([$1], [$2]),
    [m4_warning([Unknown $1 option `$2'])])[]dnl
 ])
 # _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
 # ------------------------------------------------------------
 # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
 m4_define([_LT_IF_OPTION],
 [m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
 # _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
 # -------------------------------------------------------
 # Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
 # are set.
 m4_define([_LT_UNLESS_OPTIONS],
 [m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
 	    [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
 		      [m4_define([$0_found])])])[]dnl
 m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
 ])[]dnl
 ])
 # _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
 # ----------------------------------------
 # OPTION-LIST is a space-separated list of Libtool options associated
 # with MACRO-NAME.  If any OPTION has a matching handler declared with
 # LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
 # the unknown option and exit.
 m4_defun([_LT_SET_OPTIONS],
 [# Set options
 m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
    [_LT_SET_OPTION([$1], _LT_Option)])
 m4_if([$1],[LT_INIT],[
  dnl
  dnl Simply set some default values (i.e off) if boolean options were not
  dnl specified:
  _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
  ])
  _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
  ])
  dnl
  dnl If no reference was made to various pairs of opposing options, then
  dnl we run the default mode handler for the pair.  For example, if neither
  dnl `shared' nor `disable-shared' was passed, we enable building of shared
  dnl archives by default:
  _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
  _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
  _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
  _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
  		   [_LT_ENABLE_FAST_INSTALL])
  ])
 ])# _LT_SET_OPTIONS
 ## --------------------------------- ##
 ## Macros to handle LT_INIT options. ##
 ## --------------------------------- ##
 # _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
 # -----------------------------------------
 m4_define([_LT_MANGLE_DEFUN],
 [[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
 # LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
 # -----------------------------------------------
 m4_define([LT_OPTION_DEFINE],
 [m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
 ])# LT_OPTION_DEFINE
 # dlopen
 # ------
 LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
 ])
 AU_DEFUN([AC_LIBTOOL_DLOPEN],
 [_LT_SET_OPTION([LT_INIT], [dlopen])
 AC_DIAGNOSE([obsolete],
 [$0: Remove this warning and the call to _LT_SET_OPTION when you
 put the `dlopen' option into LT_INIT's first parameter.])
 ])
 dnl aclocal-1.4 backwards compatibility:
 dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
 # win32-dll
 # ---------
 # Declare package support for building win32 dll's.
 LT_OPTION_DEFINE([LT_INIT], [win32-dll],
 [enable_win32_dll=yes
 case $host in
 *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
  AC_CHECK_TOOL(AS, as, false)
  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
  AC_CHECK_TOOL(OBJDUMP, objdump, false)
  ;;
 esac
 test -z "$AS" && AS=as
 _LT_DECL([], [AS],      [1], [Assembler program])dnl
 test -z "$DLLTOOL" && DLLTOOL=dlltool
 _LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
 test -z "$OBJDUMP" && OBJDUMP=objdump
 _LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
 ])# win32-dll
 AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
 _LT_SET_OPTION([LT_INIT], [win32-dll])
 AC_DIAGNOSE([obsolete],
 [$0: Remove this warning and the call to _LT_SET_OPTION when you
 put the `win32-dll' option into LT_INIT's first parameter.])
 ])
 dnl aclocal-1.4 backwards compatibility:
 dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
 # _LT_ENABLE_SHARED([DEFAULT])
 # ----------------------------
 # implement the --enable-shared flag, and supports the `shared' and
 # `disable-shared' LT_INIT options.
 # DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
 m4_define([_LT_ENABLE_SHARED],
 [m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
 AC_ARG_ENABLE([shared],
    [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
 	[build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
    [p=${PACKAGE-default}
    case $enableval in
    yes) enable_shared=yes ;;
    no) enable_shared=no ;;
    *)
      enable_shared=no
      # Look at the argument we got.  We use all the common list separators.
      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
      for pkg in $enableval; do
 	IFS="$lt_save_ifs"
 	if test "X$pkg" = "X$p"; then
 	  enable_shared=yes
 	fi
      done
      IFS="$lt_save_ifs"
      ;;
    esac],
    [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
    _LT_DECL([build_libtool_libs], [enable_shared], [0],
 	[Whether or not to build shared libraries])
 ])# _LT_ENABLE_SHARED
 LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
 LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
 # Old names:
 AC_DEFUN([AC_ENABLE_SHARED],
 [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
 ])
 AC_DEFUN([AC_DISABLE_SHARED],
 [_LT_SET_OPTION([LT_INIT], [disable-shared])
 ])
 AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
 AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
 dnl aclocal-1.4 backwards compatibility:
 dnl AC_DEFUN([AM_ENABLE_SHARED], [])
 dnl AC_DEFUN([AM_DISABLE_SHARED], [])
 # _LT_ENABLE_STATIC([DEFAULT])
 # ----------------------------
 # implement the --enable-static flag, and support the `static' and
 # `disable-static' LT_INIT options.
 # DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
 m4_define([_LT_ENABLE_STATIC],
 [m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
 AC_ARG_ENABLE([static],
    [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
 	[build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
    [p=${PACKAGE-default}
    case $enableval in
    yes) enable_static=yes ;;
    no) enable_static=no ;;
    *)
     enable_static=no
      # Look at the argument we got.  We use all the common list separators.
      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
      for pkg in $enableval; do
 	IFS="$lt_save_ifs"
 	if test "X$pkg" = "X$p"; then
 	  enable_static=yes
 	fi
      done
      IFS="$lt_save_ifs"
      ;;
    esac],
    [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
    _LT_DECL([build_old_libs], [enable_static], [0],
 	[Whether or not to build static libraries])
 ])# _LT_ENABLE_STATIC
 LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
 LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
 # Old names:
 AC_DEFUN([AC_ENABLE_STATIC],
 [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
 ])
 AC_DEFUN([AC_DISABLE_STATIC],
 [_LT_SET_OPTION([LT_INIT], [disable-static])
 ])
 AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
 AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
 dnl aclocal-1.4 backwards compatibility:
 dnl AC_DEFUN([AM_ENABLE_STATIC], [])
 dnl AC_DEFUN([AM_DISABLE_STATIC], [])
 # _LT_ENABLE_FAST_INSTALL([DEFAULT])
 # ----------------------------------
 # implement the --enable-fast-install flag, and support the `fast-install'
 # and `disable-fast-install' LT_INIT options.
 # DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
 m4_define([_LT_ENABLE_FAST_INSTALL],
 [m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
 AC_ARG_ENABLE([fast-install],
    [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
    [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
    [p=${PACKAGE-default}
    case $enableval in
    yes) enable_fast_install=yes ;;
    no) enable_fast_install=no ;;
    *)
      enable_fast_install=no
      # Look at the argument we got.  We use all the common list separators.
      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
      for pkg in $enableval; do
 	IFS="$lt_save_ifs"
 	if test "X$pkg" = "X$p"; then
 	  enable_fast_install=yes
 	fi
      done
      IFS="$lt_save_ifs"
      ;;
    esac],
    [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
 _LT_DECL([fast_install], [enable_fast_install], [0],
 	 [Whether or not to optimize for fast installation])dnl
 ])# _LT_ENABLE_FAST_INSTALL
 LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
 LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
 # Old names:
 AU_DEFUN([AC_ENABLE_FAST_INSTALL],
 [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
 AC_DIAGNOSE([obsolete],
 [$0: Remove this warning and the call to _LT_SET_OPTION when you put
 the `fast-install' option into LT_INIT's first parameter.])
 ])
 AU_DEFUN([AC_DISABLE_FAST_INSTALL],
 [_LT_SET_OPTION([LT_INIT], [disable-fast-install])
 AC_DIAGNOSE([obsolete],
 [$0: Remove this warning and the call to _LT_SET_OPTION when you put
 the `disable-fast-install' option into LT_INIT's first parameter.])
 ])
 dnl aclocal-1.4 backwards compatibility:
 dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
 dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
 # _LT_WITH_PIC([MODE])
 # --------------------
 # implement the --with-pic flag, and support the `pic-only' and `no-pic'
 # LT_INIT options.
 # MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
 m4_define([_LT_WITH_PIC],
 [AC_ARG_WITH([pic],
    [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
 	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
    [lt_p=${PACKAGE-default}
    case $withval in
    yes|no) pic_mode=$withval ;;
    *)
      pic_mode=default
      # Look at the argument we got.  We use all the common list separators.
      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
      for lt_pkg in $withval; do
 	IFS="$lt_save_ifs"
 	if test "X$lt_pkg" = "X$lt_p"; then
 	  pic_mode=yes
 	fi
      done
      IFS="$lt_save_ifs"
      ;;
    esac],
    [pic_mode=default])
 test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
 _LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
 ])# _LT_WITH_PIC
 LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
 LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
 # Old name:
 AU_DEFUN([AC_LIBTOOL_PICMODE],
 [_LT_SET_OPTION([LT_INIT], [pic-only])
 AC_DIAGNOSE([obsolete],
 [$0: Remove this warning and the call to _LT_SET_OPTION when you
 put the `pic-only' option into LT_INIT's first parameter.])
 ])
 dnl aclocal-1.4 backwards compatibility:
 dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
 ## ----------------- ##
 ## LTDL_INIT Options ##
 ## ----------------- ##
 m4_define([_LTDL_MODE], [])
 LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
 		 [m4_define([_LTDL_MODE], [nonrecursive])])
 LT_OPTION_DEFINE([LTDL_INIT], [recursive],
 		 [m4_define([_LTDL_MODE], [recursive])])
 LT_OPTION_DEFINE([LTDL_INIT], [subproject],
 		 [m4_define([_LTDL_MODE], [subproject])])
 m4_define([_LTDL_TYPE], [])
 LT_OPTION_DEFINE([LTDL_INIT], [installable],
 		 [m4_define([_LTDL_TYPE], [installable])])
 LT_OPTION_DEFINE([LTDL_INIT], [convenience],
 		 [m4_define([_LTDL_TYPE], [convenience])])
--- a/m4/ltsugar.m4
+++ b/m4/ltsugar.m4
@@ -1,123 +0,0 @@
 # ltsugar.m4 -- libtool m4 base layer.                         -*-Autoconf-*-
 #
 # Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
 # Written by Gary V. Vaughan, 2004
 #
 # This file is free software; the Free Software Foundation gives
 # unlimited permission to copy and/or distribute it, with or without
 # modifications, as long as this notice is preserved.
 # serial 6 ltsugar.m4
 # This is to help aclocal find these macros, as it can't see m4_define.
 AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
 # lt_join(SEP, ARG1, [ARG2...])
 # -----------------------------
 # Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
 # associated separator.
 # Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
 # versions in m4sugar had bugs.
 m4_define([lt_join],
 [m4_if([$#], [1], [],
       [$#], [2], [[$2]],
       [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
 m4_define([_lt_join],
 [m4_if([$#$2], [2], [],
       [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
 # lt_car(LIST)
 # lt_cdr(LIST)
 # ------------
 # Manipulate m4 lists.
 # These macros are necessary as long as will still need to support
 # Autoconf-2.59 which quotes differently.
 m4_define([lt_car], [[$1]])
 m4_define([lt_cdr],
 [m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
       [$#], 1, [],
       [m4_dquote(m4_shift($@))])])
 m4_define([lt_unquote], $1)
 # lt_append(MACRO-NAME, STRING, [SEPARATOR])
 # ------------------------------------------
 # Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
 # Note that neither SEPARATOR nor STRING are expanded; they are appended
 # to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
 # No SEPARATOR is output if MACRO-NAME was previously undefined (different
 # than defined and empty).
 #
 # This macro is needed until we can rely on Autoconf 2.62, since earlier
 # versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
 m4_define([lt_append],
 [m4_define([$1],
 	   m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
 # lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
 # ----------------------------------------------------------
 # Produce a SEP delimited list of all paired combinations of elements of
 # PREFIX-LIST with SUFFIX1 through SUFFIXn.  Each element of the list
 # has the form PREFIXmINFIXSUFFIXn.
 # Needed until we can rely on m4_combine added in Autoconf 2.62.
 m4_define([lt_combine],
 [m4_if(m4_eval([$# > 3]), [1],
       [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
 [[m4_foreach([_Lt_prefix], [$2],
 	     [m4_foreach([_Lt_suffix],
 		]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
 	[_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
 # lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
 # -----------------------------------------------------------------------
 # Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
 # by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
 m4_define([lt_if_append_uniq],
 [m4_ifdef([$1],
 	  [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
 		 [lt_append([$1], [$2], [$3])$4],
 		 [$5])],
 	  [lt_append([$1], [$2], [$3])$4])])
 # lt_dict_add(DICT, KEY, VALUE)
 # -----------------------------
 m4_define([lt_dict_add],
 [m4_define([$1($2)], [$3])])
 # lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
 # --------------------------------------------
 m4_define([lt_dict_add_subkey],
 [m4_define([$1($2:$3)], [$4])])
 # lt_dict_fetch(DICT, KEY, [SUBKEY])
 # ----------------------------------
 m4_define([lt_dict_fetch],
 [m4_ifval([$3],
 	m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
    m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
 # lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
 # -----------------------------------------------------------------
 m4_define([lt_if_dict_fetch],
 [m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
 	[$5],
    [$6])])
 # lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
 # --------------------------------------------------------------
 m4_define([lt_dict_filter],
 [m4_if([$5], [], [],
  [lt_join(m4_quote(m4_default([$4], [[, ]])),
           lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
 		      [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
 ])
--- a/m4/ltversion.m4
+++ b/m4/ltversion.m4
@@ -1,23 +0,0 @@
 # ltversion.m4 -- version numbers			-*- Autoconf -*-
 #
 #   Copyright (C) 2004 Free Software Foundation, Inc.
 #   Written by Scott James Remnant, 2004
 #
 # This file is free software; the Free Software Foundation gives
 # unlimited permission to copy and/or distribute it, with or without
 # modifications, as long as this notice is preserved.
 # @configure_input@
 # serial 3337 ltversion.m4
 # This file is part of GNU Libtool
 m4_define([LT_PACKAGE_VERSION], [2.4.2])
 m4_define([LT_PACKAGE_REVISION], [1.3337])
 AC_DEFUN([LTVERSION_VERSION],
 [macro_version='2.4.2'
 macro_revision='1.3337'
 _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
 _LT_DECL(, macro_revision, 0)
 ])
--- a/m4/lt~obsolete.m4
+++ b/m4/lt~obsolete.m4
@@ -1,98 +0,0 @@
 # lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
 #
 #   Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
 #   Written by Scott James Remnant, 2004.
 #
 # This file is free software; the Free Software Foundation gives
 # unlimited permission to copy and/or distribute it, with or without
 # modifications, as long as this notice is preserved.
 # serial 5 lt~obsolete.m4
 # These exist entirely to fool aclocal when bootstrapping libtool.
 #
 # In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
 # which have later been changed to m4_define as they aren't part of the
 # exported API, or moved to Autoconf or Automake where they belong.
 #
 # The trouble is, aclocal is a bit thick.  It'll see the old AC_DEFUN
 # in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
 # using a macro with the same name in our local m4/libtool.m4 it'll
 # pull the old libtool.m4 in (it doesn't see our shiny new m4_define
 # and doesn't know about Autoconf macros at all.)
 #
 # So we provide this file, which has a silly filename so it's always
 # included after everything else.  This provides aclocal with the
 # AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
 # because those macros already exist, or will be overwritten later.
 # We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. 
 #
 # Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
 # Yes, that means every name once taken will need to remain here until
 # we give up compatibility with versions before 1.7, at which point
 # we need to keep only those names which we still refer to.
 # This is to help aclocal find these macros, as it can't see m4_define.
 AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
 m4_ifndef([AC_LIBTOOL_LINKER_OPTION],	[AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
 m4_ifndef([AC_PROG_EGREP],		[AC_DEFUN([AC_PROG_EGREP])])
 m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
 m4_ifndef([_LT_AC_SHELL_INIT],		[AC_DEFUN([_LT_AC_SHELL_INIT])])
 m4_ifndef([_LT_AC_SYS_LIBPATH_AIX],	[AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
 m4_ifndef([_LT_PROG_LTMAIN],		[AC_DEFUN([_LT_PROG_LTMAIN])])
 m4_ifndef([_LT_AC_TAGVAR],		[AC_DEFUN([_LT_AC_TAGVAR])])
 m4_ifndef([AC_LTDL_ENABLE_INSTALL],	[AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
 m4_ifndef([AC_LTDL_PREOPEN],		[AC_DEFUN([AC_LTDL_PREOPEN])])
 m4_ifndef([_LT_AC_SYS_COMPILER],	[AC_DEFUN([_LT_AC_SYS_COMPILER])])
 m4_ifndef([_LT_AC_LOCK],		[AC_DEFUN([_LT_AC_LOCK])])
 m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE],	[AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
 m4_ifndef([_LT_AC_TRY_DLOPEN_SELF],	[AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
 m4_ifndef([AC_LIBTOOL_PROG_CC_C_O],	[AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
 m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
 m4_ifndef([AC_LIBTOOL_OBJDIR],		[AC_DEFUN([AC_LIBTOOL_OBJDIR])])
 m4_ifndef([AC_LTDL_OBJDIR],		[AC_DEFUN([AC_LTDL_OBJDIR])])
 m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
 m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP],	[AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
 m4_ifndef([AC_PATH_MAGIC],		[AC_DEFUN([AC_PATH_MAGIC])])
 m4_ifndef([AC_PROG_LD_GNU],		[AC_DEFUN([AC_PROG_LD_GNU])])
 m4_ifndef([AC_PROG_LD_RELOAD_FLAG],	[AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
 m4_ifndef([AC_DEPLIBS_CHECK_METHOD],	[AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
 m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
 m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
 m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
 m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS],	[AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
 m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP],	[AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
 m4_ifndef([LT_AC_PROG_EGREP],		[AC_DEFUN([LT_AC_PROG_EGREP])])
 m4_ifndef([LT_AC_PROG_SED],		[AC_DEFUN([LT_AC_PROG_SED])])
 m4_ifndef([_LT_CC_BASENAME],		[AC_DEFUN([_LT_CC_BASENAME])])
 m4_ifndef([_LT_COMPILER_BOILERPLATE],	[AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
 m4_ifndef([_LT_LINKER_BOILERPLATE],	[AC_DEFUN([_LT_LINKER_BOILERPLATE])])
 m4_ifndef([_AC_PROG_LIBTOOL],		[AC_DEFUN([_AC_PROG_LIBTOOL])])
 m4_ifndef([AC_LIBTOOL_SETUP],		[AC_DEFUN([AC_LIBTOOL_SETUP])])
 m4_ifndef([_LT_AC_CHECK_DLFCN],		[AC_DEFUN([_LT_AC_CHECK_DLFCN])])
 m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER],	[AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
 m4_ifndef([_LT_AC_TAGCONFIG],		[AC_DEFUN([_LT_AC_TAGCONFIG])])
 m4_ifndef([AC_DISABLE_FAST_INSTALL],	[AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
 m4_ifndef([_LT_AC_LANG_CXX],		[AC_DEFUN([_LT_AC_LANG_CXX])])
 m4_ifndef([_LT_AC_LANG_F77],		[AC_DEFUN([_LT_AC_LANG_F77])])
 m4_ifndef([_LT_AC_LANG_GCJ],		[AC_DEFUN([_LT_AC_LANG_GCJ])])
 m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
 m4_ifndef([_LT_AC_LANG_C_CONFIG],	[AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
 m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
 m4_ifndef([_LT_AC_LANG_CXX_CONFIG],	[AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
 m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
 m4_ifndef([_LT_AC_LANG_F77_CONFIG],	[AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
 m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
 m4_ifndef([_LT_AC_LANG_GCJ_CONFIG],	[AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
 m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
 m4_ifndef([_LT_AC_LANG_RC_CONFIG],	[AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
 m4_ifndef([AC_LIBTOOL_CONFIG],		[AC_DEFUN([AC_LIBTOOL_CONFIG])])
 m4_ifndef([_LT_AC_FILE_LTDLL_C],	[AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
 m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS],	[AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
 m4_ifndef([_LT_AC_PROG_CXXCPP],		[AC_DEFUN([_LT_AC_PROG_CXXCPP])])
 m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS],	[AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
 m4_ifndef([_LT_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
 m4_ifndef([_LT_PROG_F77],		[AC_DEFUN([_LT_PROG_F77])])
 m4_ifndef([_LT_PROG_FC],		[AC_DEFUN([_LT_PROG_FC])])
 m4_ifndef([_LT_PROG_CXX],		[AC_DEFUN([_LT_PROG_CXX])])
--- a/man/Makefile.in
+++ b/man/Makefile.in
@@ -1,483 +0,0 @@
 # Makefile.in generated by automake 1.11.6 from Makefile.am.
 # @configure_input@
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
 # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
 # Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
@SET_MAKE@
 VPATH = @srcdir@
 am__make_dryrun = \
  { \
    am__dry=no; \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
      *) \
        for am__flg in $$MAKEFLAGS; do \
          case $$am__flg in \
            *=*|--*) ;; \
            *n*) am__dry=yes; break;; \
          esac; \
        done;; \
    esac; \
    test $$am__dry = yes; \
  }
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
 pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
 install_sh_SCRIPT = $(install_sh) -c
 INSTALL_HEADER = $(INSTALL_DATA)
 transform = $(program_transform_name)
 NORMAL_INSTALL = :
 PRE_INSTALL = :
 POST_INSTALL = :
 NORMAL_UNINSTALL = :
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
 subdir = man
 DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.am \
 	$(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
 	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
 	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
 AM_V_GEN = $(am__v_GEN_@AM_V@)
 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 am__v_GEN_0 = @echo "  GEN   " $@;
 AM_V_at = $(am__v_at_@AM_V@)
 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 am__v_at_0 = @
 SOURCES =
 DIST_SOURCES =
 am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
 am__install_max = 40
 am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
 am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
 am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
 am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
 man3dir = $(mandir)/man3
 am__installdirs = "$(DESTDIR)$(man3dir)"
 NROFF = nroff
 MANS = $(dist_man_MANS)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
 AM_CFLAGS = @AM_CFLAGS@
 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AR = @AR@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
 AUTOMAKE = @AUTOMAKE@
 AWK = @AWK@
 CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
 DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 GREP = @GREP@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBTOOL = @LIBTOOL@
 LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
 NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
 OTOOL = @OTOOL@
 OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
 SED = @SED@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
 abs_builddir = @abs_builddir@
 abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
 am__tar = @am__tar@
 am__untar = @am__untar@
 bindir = @bindir@
 build = @build@
 build_alias = @build_alias@
 build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
 builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
 docdir = @docdir@
 dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 host = @host@
 host_alias = @host_alias@
 host_cpu = @host_cpu@
 host_os = @host_os@
 host_vendor = @host_vendor@
 htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
 top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
 AUTOMAKE_OPTIONS = foreign
 dist_man_MANS = editline.3
 all: all-am
 .SUFFIXES:
 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
 	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign man/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --foreign man/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
 	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 	  *) \
 	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 	esac;
 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(top_srcdir)/configure:  $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(am__aclocal_m4_deps):
 mostlyclean-libtool:
 	-rm -f *.lo
 clean-libtool:
 	-rm -rf .libs _libs
 install-man3: $(dist_man_MANS)
 	@$(NORMAL_INSTALL)
 	@list1=''; \
 	list2='$(dist_man_MANS)'; \
 	test -n "$(man3dir)" \
 	  && test -n "`echo $$list1$$list2`" \
 	  || exit 0; \
 	echo " $(MKDIR_P) '$(DESTDIR)$(man3dir)'"; \
 	$(MKDIR_P) "$(DESTDIR)$(man3dir)" || exit 1; \
 	{ for i in $$list1; do echo "$$i"; done;  \
 	if test -n "$$list2"; then \
 	  for i in $$list2; do echo "$$i"; done \
 	    | sed -n '/\.3[a-z]*$$/p'; \
 	fi; \
 	} | while read p; do \
 	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 	  echo "$$d$$p"; echo "$$p"; \
 	done | \
 	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
 	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
 	sed 'N;N;s,\n, ,g' | { \
 	list=; while read file base inst; do \
 	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
 	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
 	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \
 	  fi; \
 	done; \
 	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
 	while read files; do \
 	  test -z "$$files" || { \
 	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \
 	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \
 	done; }
 uninstall-man3:
 	@$(NORMAL_UNINSTALL)
 	@list=''; test -n "$(man3dir)" || exit 0; \
 	files=`{ for i in $$list; do echo "$$i"; done; \
 	l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
 	  sed -n '/\.3[a-z]*$$/p'; \
 	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
 	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
 	dir='$(DESTDIR)$(man3dir)'; $(am__uninstall_files_from_dir)
 tags: TAGS
 TAGS:
 ctags: CTAGS
 CTAGS:
 distdir: $(DISTFILES)
 	@list='$(MANS)'; if test -n "$$list"; then \
 	  list=`for p in $$list; do \
 	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
 	  if test -n "$$list" && \
 	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
 	    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
 	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
 	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
 	    echo "       typically \`make maintainer-clean' will remove them" >&2; \
 	    exit 1; \
 	  else :; fi; \
 	else :; fi
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	list='$(DISTFILES)'; \
 	  dist_files=`for file in $$list; do echo $$file; done | \
 	  sed -e "s|^$$srcdirstrip/||;t" \
 	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 	case $$dist_files in \
 	  */*) $(MKDIR_P) `echo "$$dist_files" | \
 			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 			   sort -u` ;; \
 	esac; \
 	for file in $$dist_files; do \
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 	    if test -d "$(distdir)/$$file"; then \
 	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
 	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
 	    test -f "$(distdir)/$$file" \
 	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
 check-am: all-am
 check: check-am
 all-am: Makefile $(MANS)
 installdirs:
 	for dir in "$(DESTDIR)$(man3dir)"; do \
 	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-am
 install-exec: install-exec-am
 install-data: install-data-am
 uninstall: uninstall-am
 install-am: all-am
 	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 installcheck: installcheck-am
 install-strip:
 	if test -z '$(STRIP)'; then \
 	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 	      install; \
 	else \
 	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
 	fi
 mostlyclean-generic:
 clean-generic:
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
 	@echo "it deletes files that may require special tools to rebuild."
 clean: clean-am
 clean-am: clean-generic clean-libtool mostlyclean-am
 distclean: distclean-am
 	-rm -f Makefile
 distclean-am: clean-am distclean-generic
 dvi: dvi-am
 dvi-am:
 html: html-am
 html-am:
 info: info-am
 info-am:
 install-data-am: install-man
 install-dvi: install-dvi-am
 install-dvi-am:
 install-exec-am:
 install-html: install-html-am
 install-html-am:
 install-info: install-info-am
 install-info-am:
 install-man: install-man3
 install-pdf: install-pdf-am
 install-pdf-am:
 install-ps: install-ps-am
 install-ps-am:
 installcheck-am:
 maintainer-clean: maintainer-clean-am
 	-rm -f Makefile
 maintainer-clean-am: distclean-am maintainer-clean-generic
 mostlyclean: mostlyclean-am
 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 pdf: pdf-am
 pdf-am:
 ps: ps-am
 ps-am:
 uninstall-am: uninstall-man
 uninstall-man: uninstall-man3
 .MAKE: install-am install-strip
 .PHONY: all all-am check check-am clean clean-generic clean-libtool \
 	distclean distclean-generic distclean-libtool distdir dvi \
 	dvi-am html html-am info info-am install install-am \
 	install-data install-data-am install-dvi install-dvi-am \
 	install-exec install-exec-am install-html install-html-am \
 	install-info install-info-am install-man install-man3 \
 	install-pdf install-pdf-am install-ps install-ps-am \
 	install-strip installcheck installcheck-am installdirs \
 	maintainer-clean maintainer-clean-generic mostlyclean \
 	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
 	uninstall uninstall-am uninstall-man uninstall-man3
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
--- a/367
+++ b/367
@@ -1,367 +0,0 @@
 #! /bin/sh
 # Common stub for a few missing GNU programs while installing.
 scriptversion=2006-05-10.23
 # Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
 #   Free Software Foundation, Inc.
 # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
 # the Free Software Foundation; either version 2, or (at your option)
 # any later version.
 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
 # 02110-1301, USA.
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
 # the same distribution terms that you use for the rest of that program.
 if test $# -eq 0; then
  echo 1>&2 "Try \`$0 --help' for more information"
  exit 1
 fi
 run=:
 sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
 sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
 # In the cases where this matters, `missing' is being run in the
 # srcdir already.
 if test -f configure.ac; then
  configure_ac=configure.ac
 else
  configure_ac=configure.in
 fi
 msg="missing on your system"
 case $1 in
 --run)
  # Try to run requested program, and just exit if it succeeds.
  run=
  shift
  "$@" && exit 0
  # Exit code 63 means version mismatch.  This often happens
  # when the user try to use an ancient version of a tool on
  # a file that requires a minimum version.  In this case we
  # we should proceed has if the program had been absent, or
  # if --run hadn't been passed.
  if test $? = 63; then
    run=:
    msg="probably too old"
  fi
  ;;
  -h|--h|--he|--hel|--help)
    echo "\
 $0 [OPTION]... PROGRAM [ARGUMENT]...
 Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
 error status if there is no known handling for PROGRAM.
 Options:
  -h, --help      display this help and exit
  -v, --version   output version information and exit
  --run           try to run the given command, and emulate it if it fails
 Supported PROGRAM values:
  aclocal      touch file \`aclocal.m4'
  autoconf     touch file \`configure'
  autoheader   touch file \`config.h.in'
  autom4te     touch the output file, or create a stub one
  automake     touch all \`Makefile.in' files
  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
  flex         create \`lex.yy.c', if possible, from existing .c
  help2man     touch the output file
  lex          create \`lex.yy.c', if possible, from existing .c
  makeinfo     touch the output file
  tar          try tar, gnutar, gtar, then tar without non-portable flags
  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
 Send bug reports to <bug-automake@gnu.org>."
    exit $?
    ;;
  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
    echo "missing $scriptversion (GNU Automake)"
    exit $?
    ;;
  -*)
    echo 1>&2 "$0: Unknown \`$1' option"
    echo 1>&2 "Try \`$0 --help' for more information"
    exit 1
    ;;
 esac
 # Now exit if we have it, but it failed.  Also exit now if we
 # don't have it and --version was passed (most likely to detect
 # the program).
 case $1 in
  lex|yacc)
    # Not GNU programs, they don't have --version.
    ;;
  tar)
    if test -n "$run"; then
       echo 1>&2 "ERROR: \`tar' requires --run"
       exit 1
    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
       exit 1
    fi
    ;;
  *)
    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
       # We have it, but it failed.
       exit 1
    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
       # Could not run --version or --help.  This is probably someone
       # running `$TOOL --version' or `$TOOL --help' to check whether
       # $TOOL exists and not knowing $TOOL uses missing.
       exit 1
    fi
    ;;
 esac
 # If it does not exist, or fails to run (possibly an outdated version),
 # try to emulate it.
 case $1 in
  aclocal*)
    echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
         to install the \`Automake' and \`Perl' packages.  Grab them from
         any GNU archive site."
    touch aclocal.m4
    ;;
  autoconf)
    echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
         you modified \`${configure_ac}'.  You might want to install the
         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
         archive site."
    touch configure
    ;;
  autoheader)
    echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
         from any GNU archive site."
    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
    test -z "$files" && files="config.h"
    touch_files=
    for f in $files; do
      case $f in
      *:*) touch_files="$touch_files "`echo "$f" |
 				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
      *) touch_files="$touch_files $f.in";;
      esac
    done
    touch $touch_files
    ;;
  automake*)
    echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
         You might want to install the \`Automake' and \`Perl' packages.
         Grab them from any GNU archive site."
    find . -type f -name Makefile.am -print |
 	   sed 's/\.am$/.in/' |
 	   while read f; do touch "$f"; done
    ;;
  autom4te)
    echo 1>&2 "\
 WARNING: \`$1' is needed, but is $msg.
         You might have modified some files without having the
         proper tools for further handling them.
         You can get \`$1' as part of \`Autoconf' from any GNU
         archive site."
    file=`echo "$*" | sed -n "$sed_output"`
    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
    if test -f "$file"; then
 	touch $file
    else
 	test -z "$file" || exec >$file
 	echo "#! /bin/sh"
 	echo "# Created by GNU Automake missing as a replacement of"
 	echo "#  $ $@"
 	echo "exit 0"
 	chmod +x $file
 	exit 1
    fi
    ;;
  bison|yacc)
    echo 1>&2 "\
 WARNING: \`$1' $msg.  You should only need it if
         you modified a \`.y' file.  You may need the \`Bison' package
         in order for those modifications to take effect.  You can get
         \`Bison' from any GNU archive site."
    rm -f y.tab.c y.tab.h
    if test $# -ne 1; then
        eval LASTARG="\${$#}"
 	case $LASTARG in
 	*.y)
 	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
 	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" y.tab.c
 	    fi
 	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
 	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" y.tab.h
 	    fi
 	  ;;
 	esac
    fi
    if test ! -f y.tab.h; then
 	echo >y.tab.h
    fi
    if test ! -f y.tab.c; then
 	echo 'main() { return 0; }' >y.tab.c
    fi
    ;;
  lex|flex)
    echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
         you modified a \`.l' file.  You may need the \`Flex' package
         in order for those modifications to take effect.  You can get
         \`Flex' from any GNU archive site."
    rm -f lex.yy.c
    if test $# -ne 1; then
        eval LASTARG="\${$#}"
 	case $LASTARG in
 	*.l)
 	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
 	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" lex.yy.c
 	    fi
 	  ;;
 	esac
    fi
    if test ! -f lex.yy.c; then
 	echo 'main() { return 0; }' >lex.yy.c
    fi
    ;;
  help2man)
    echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
 	 you modified a dependency of a manual page.  You may need the
 	 \`Help2man' package in order for those modifications to take
 	 effect.  You can get \`Help2man' from any GNU archive site."
    file=`echo "$*" | sed -n "$sed_output"`
    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
    if test -f "$file"; then
 	touch $file
    else
 	test -z "$file" || exec >$file
 	echo ".ab help2man is required to generate this page"
 	exit 1
    fi
    ;;
  makeinfo)
    echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
         you modified a \`.texi' or \`.texinfo' file, or any other file
         indirectly affecting the aspect of the manual.  The spurious
         call might also be the consequence of using a buggy \`make' (AIX,
         DU, IRIX).  You might want to install the \`Texinfo' package or
         the \`GNU make' package.  Grab either from any GNU archive site."
    # The file to touch is that specified with -o ...
    file=`echo "$*" | sed -n "$sed_output"`
    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
    if test -z "$file"; then
      # ... or it is the one specified with @setfilename ...
      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
      file=`sed -n '
 	/^@setfilename/{
 	  s/.* \([^ ]*\) *$/\1/
 	  p
 	  q
 	}' $infile`
      # ... or it is derived from the source name (dir/f.texi becomes f.info)
      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
    fi
    # If the file does not exist, the user really needs makeinfo;
    # let's fail without touching anything.
    test -f $file || exit 1
    touch $file
    ;;
  tar)
    shift
    # We have already tried tar in the generic part.
    # Look for gnutar/gtar before invocation to avoid ugly error
    # messages.
    if (gnutar --version > /dev/null 2>&1); then
       gnutar "$@" && exit 0
    fi
    if (gtar --version > /dev/null 2>&1); then
       gtar "$@" && exit 0
    fi
    firstarg="$1"
    if shift; then
 	case $firstarg in
 	*o*)
 	    firstarg=`echo "$firstarg" | sed s/o//`
 	    tar "$firstarg" "$@" && exit 0
 	    ;;
 	esac
 	case $firstarg in
 	*h*)
 	    firstarg=`echo "$firstarg" | sed s/h//`
 	    tar "$firstarg" "$@" && exit 0
 	    ;;
 	esac
    fi
    echo 1>&2 "\
 WARNING: I can't seem to be able to run \`tar' with the given arguments.
         You may want to install GNU tar or Free paxutils, or check the
         command line arguments."
    exit 1
    ;;
  *)
    echo 1>&2 "\
 WARNING: \`$1' is needed, and is $msg.
         You might have modified some files without having the
         proper tools for further handling them.  Check the \`README' file,
         it often tells you about the needed prerequisites for installing
         this package.  You may also peek at any GNU archive site, in case
         some other package would contain this missing \`$1' program."
    exit 1
    ;;
 esac
 exit 0
 # Local variables:
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
 # time-stamp-end: "$"
 # End:
--- a/src/Makefile.in
+++ b/src/Makefile.in
@@ -1,571 +0,0 @@
 # Makefile.in generated by automake 1.11.6 from Makefile.am.
 # @configure_input@
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
 # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
 # Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
@SET_MAKE@
 VPATH = @srcdir@
 am__make_dryrun = \
  { \
    am__dry=no; \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
      *) \
        for am__flg in $$MAKEFLAGS; do \
          case $$am__flg in \
            *=*|--*) ;; \
            *n*) am__dry=yes; break;; \
          esac; \
        done;; \
    esac; \
    test $$am__dry = yes; \
  }
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
 pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
 install_sh_SCRIPT = $(install_sh) -c
 INSTALL_HEADER = $(INSTALL_DATA)
 transform = $(program_transform_name)
 NORMAL_INSTALL = :
 PRE_INSTALL = :
 POST_INSTALL = :
 NORMAL_UNINSTALL = :
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
 subdir = src
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
 	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
 	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
 am__install_max = 40
 am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
 am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
 am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
 am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
 am__installdirs = "$(DESTDIR)$(libdir)"
 LTLIBRARIES = $(lib_LTLIBRARIES)
 libeditline_la_LIBADD =
 am_libeditline_la_OBJECTS = editline.lo complete.lo sysunix.lo
 libeditline_la_OBJECTS = $(am_libeditline_la_OBJECTS)
 AM_V_lt = $(am__v_lt_@AM_V@)
 am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
 am__v_lt_0 = --silent
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
 am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
 	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
 	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
 	$(AM_CFLAGS) $(CFLAGS)
 AM_V_CC = $(am__v_CC_@AM_V@)
 am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
 am__v_CC_0 = @echo "  CC    " $@;
 AM_V_at = $(am__v_at_@AM_V@)
 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 am__v_at_0 = @
 CCLD = $(CC)
 LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
 	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
 	$(AM_LDFLAGS) $(LDFLAGS) -o $@
 AM_V_CCLD = $(am__v_CCLD_@AM_V@)
 am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
 am__v_CCLD_0 = @echo "  CCLD  " $@;
 AM_V_GEN = $(am__v_GEN_@AM_V@)
 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 am__v_GEN_0 = @echo "  GEN   " $@;
 SOURCES = $(libeditline_la_SOURCES)
 DIST_SOURCES = $(libeditline_la_SOURCES)
 am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
 ETAGS = etags
 CTAGS = ctags
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
 AM_CFLAGS = @AM_CFLAGS@
 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AR = @AR@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
 AUTOMAKE = @AUTOMAKE@
 AWK = @AWK@
 CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
 DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 GREP = @GREP@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBTOOL = @LIBTOOL@
 LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
 NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
 OTOOL = @OTOOL@
 OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
 SED = @SED@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
 abs_builddir = @abs_builddir@
 abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
 am__tar = @am__tar@
 am__untar = @am__untar@
 bindir = @bindir@
 build = @build@
 build_alias = @build_alias@
 build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
 builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
 docdir = @docdir@
 dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 host = @host@
 host_alias = @host_alias@
 host_cpu = @host_cpu@
 host_os = @host_os@
 host_vendor = @host_vendor@
 htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
 top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
 AUTOMAKE_OPTIONS = foreign
 lib_LTLIBRARIES = libeditline.la
 libeditline_la_SOURCES = editline.c editline.h complete.c sysunix.c unix.h
 all: all-am
 .SUFFIXES:
 .SUFFIXES: .c .lo .o .obj
 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
 	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --foreign src/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
 	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 	  *) \
 	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 	esac;
 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(top_srcdir)/configure:  $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(am__aclocal_m4_deps):
 install-libLTLIBRARIES: $(lib_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
 	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
 	list2=; for p in $$list; do \
 	  if test -f $$p; then \
 	    list2="$$list2 $$p"; \
 	  else :; fi; \
 	done; \
 	test -z "$$list2" || { \
 	  echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \
 	  $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \
 	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
 	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
 	}
 uninstall-libLTLIBRARIES:
 	@$(NORMAL_UNINSTALL)
 	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
 	for p in $$list; do \
 	  $(am__strip_dir) \
 	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
 	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
 	done
 clean-libLTLIBRARIES:
 	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
 	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
 	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
 	  test "$$dir" != "$$p" || dir=.; \
 	  echo "rm -f \"$${dir}/so_locations\""; \
 	  rm -f "$${dir}/so_locations"; \
 	done
 libeditline.la: $(libeditline_la_OBJECTS) $(libeditline_la_DEPENDENCIES) $(EXTRA_libeditline_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(LINK) -rpath $(libdir) $(libeditline_la_OBJECTS) $(libeditline_la_LIBADD) $(LIBS)
 mostlyclean-compile:
 	-rm -f *.$(OBJEXT)
 distclean-compile:
 	-rm -f *.tab.c
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/complete.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/editline.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sysunix.Plo@am__quote@
 .c.o:
@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c $<
 .c.obj:
@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'`
 .c.lo:
@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
 mostlyclean-libtool:
 	-rm -f *.lo
 clean-libtool:
 	-rm -rf .libs _libs
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
 	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	shift; \
 	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
 	  if test $$# -gt 0; then \
 	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 	      "$$@" $$unique; \
 	  else \
 	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 	      $$unique; \
 	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 	     $$unique
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
 	  && $(am__cd) $(top_srcdir) \
 	  && gtags -i $(GTAGS_ARGS) "$$here"
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 distdir: $(DISTFILES)
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	list='$(DISTFILES)'; \
 	  dist_files=`for file in $$list; do echo $$file; done | \
 	  sed -e "s|^$$srcdirstrip/||;t" \
 	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 	case $$dist_files in \
 	  */*) $(MKDIR_P) `echo "$$dist_files" | \
 			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 			   sort -u` ;; \
 	esac; \
 	for file in $$dist_files; do \
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 	    if test -d "$(distdir)/$$file"; then \
 	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
 	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
 	    test -f "$(distdir)/$$file" \
 	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
 check-am: all-am
 check: check-am
 all-am: Makefile $(LTLIBRARIES)
 installdirs:
 	for dir in "$(DESTDIR)$(libdir)"; do \
 	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-am
 install-exec: install-exec-am
 install-data: install-data-am
 uninstall: uninstall-am
 install-am: all-am
 	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 installcheck: installcheck-am
 install-strip:
 	if test -z '$(STRIP)'; then \
 	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 	      install; \
 	else \
 	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
 	fi
 mostlyclean-generic:
 clean-generic:
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
 	@echo "it deletes files that may require special tools to rebuild."
 clean: clean-am
 clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
 	mostlyclean-am
 distclean: distclean-am
 	-rm -rf ./$(DEPDIR)
 	-rm -f Makefile
 distclean-am: clean-am distclean-compile distclean-generic \
 	distclean-tags
 dvi: dvi-am
 dvi-am:
 html: html-am
 html-am:
 info: info-am
 info-am:
 install-data-am:
 install-dvi: install-dvi-am
 install-dvi-am:
 install-exec-am: install-libLTLIBRARIES
 install-html: install-html-am
 install-html-am:
 install-info: install-info-am
 install-info-am:
 install-man:
 install-pdf: install-pdf-am
 install-pdf-am:
 install-ps: install-ps-am
 install-ps-am:
 installcheck-am:
 maintainer-clean: maintainer-clean-am
 	-rm -rf ./$(DEPDIR)
 	-rm -f Makefile
 maintainer-clean-am: distclean-am maintainer-clean-generic
 mostlyclean: mostlyclean-am
 mostlyclean-am: mostlyclean-compile mostlyclean-generic \
 	mostlyclean-libtool
 pdf: pdf-am
 pdf-am:
 ps: ps-am
 ps-am:
 uninstall-am: uninstall-libLTLIBRARIES
 .MAKE: install-am install-strip
 .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
 	clean-libLTLIBRARIES clean-libtool ctags distclean \
 	distclean-compile distclean-generic distclean-libtool \
 	distclean-tags distdir dvi dvi-am html html-am info info-am \
 	install install-am install-data install-data-am install-dvi \
 	install-dvi-am install-exec install-exec-am install-html \
 	install-html-am install-info install-info-am \
 	install-libLTLIBRARIES install-man install-pdf install-pdf-am \
 	install-ps install-ps-am install-strip installcheck \
 	installcheck-am installdirs maintainer-clean \
 	maintainer-clean-generic mostlyclean mostlyclean-compile \
 	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
 	tags uninstall uninstall-am uninstall-libLTLIBRARIES
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT: