Update README and bump version to 1.14.0 for release.

When adding support for rl_reset_termial() the tty_info() code was also
refactored.  This however led to the introduction of a bug that caused
tty_cols to be set to zero.  This in turn caused c_possible() to fail
with SIGFPE in el_print_columns().

Regression was introduced in 1c89c9886c

INSTALL

@@ -0,0 +1,44 @@
+HowTo Build Minix Editline
+==========================
+
+Minix editline makes use of GNU configure tools, which includes autoconf, automake
+and libtool. This enables high levels of portability and ease of use In most cases
+all you need to do is unpack the tarball, enter the directory and type:
+
+    ./configure
+
+There are are, however, more options available.  For instance, sometimes it is useful
+to build editline as a static library, type:
+
+    ./configure --disable-shared
+
+By default editline employs a default handler for the TAB key, pressing it once
+completes to the nearest matching filename in the current working directory, or it
+can display a listing of possible completions.  For some uses this default is not
+desirable at all, type:
+
+    ./configure --disable-default-complete
+
+An even more common desire is to change the default install location.  By default all
+configure scripts setup /usr/local as the install "prefix", to change this type:
+
+    ./configure --prefix=/home/troglobit/tmp
+
+Advanced users are encouraged to read up on --libdir, --mandir, etc. in the GNU
+Configure and Build System.
+
+For more available options, type:
+
+    ./configure --help
+
+To build and install, simply type:
+
+    make
+
+followed by
+
+    sudo make install
+
+Good Luck!
+     //Joachim
+

Makefile.in

@@ -36,8 +36,8 @@ host_triplet = @host@
 subdir = .
 DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
 	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
-	$(top_srcdir)/configure NEWS TODO config.guess config.sub \
-	depcomp install-sh ltmain.sh missing
+	$(top_srcdir)/configure INSTALL NEWS TODO config.guess \
+	config.sub depcomp install-sh ltmain.sh missing
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \

README

@@ -1,39 +1,36 @@
 README                                          -*-text-*-
 
 This is a line editing library.  It can be linked into almost any program to
-provide command-line editing and history.
+provide command-line editing and history.  It is call-compatible with the FSF
+readline library, but is a fraction of the size (and offers fewer features).
 
-It is call-compatible with the FSF readline library, but it is a fraction of
-the size (and offers fewer features).  It does not use standard I/O.  It is
-distributed under a "C News-like" copyright, see the file LICENSE for details.
+The editline library was created by Simmule Turner and Rich Salz back in 1992.
+At the time they chose to distribute the code under a "C News-like" copyright,
+see the file LICENSE for details.
+
+The small size (<30k), lack of dependencies (no ncurses needed!) and the free
+license should make this library interesting to many embedded developers.
 
 Configuration is made by supplying different options to the GNU configure
-script.  In the examples/ directory you can find some small code snippets
-used for testing.
+script.  In the examples/ directory you can find some small code snippets used
+for testing.
 
-Before finding out about the Debian version I was on the lookout for a really
-small replacement for the GNU readline package. Not only was libreadline large
-and GPL:ed (instead of LGPL:ed), it also depends on libncurses, the resulting
-size was a bit too much for my embedded system.  I eventually stubmled upon the
-BSD libedit library, which was sufficient for a while, even though it too
-depends on libncurses.  I searched my soul and went back to where I, back in
-1996, started out -- Minix.  And there it was, a really small readline
-replacement!
+This version of the editline library is a fork off the Minix3 sources. Other
+know versions, often based off of the original comp.sources.unix posting are:
 
-In 2000 Jim Studt packaged libeditline for Debian[1], the exact origin of the
-Debian code base is unclear, see the Sid package[2] for details. There were
-some notable differences between that version and the upstream Minix sources,
-all of which have now been merged here.
+   * Debian libeditline, http://packages.qa.debian.org/e/editline.html
+   * Heimdal, http://www.h5l.org
+   * Festival speech-tools, http://festvox.org/festival/
+   * Steve Tell's editline patches, http://www.cs.unc.edu/~tell/dist.html
+
+The most intersting patches and bug fixes from each fork have been merged here.
+Outstanding issues are listed in the TODO file.
 
 An explanation of the version numbering may be in order.  I didn't know about
 the Debian version for quite some time, so I kept a different name for the
 package and a different versioning scheme.  In June 2009, I decided to line up
-alongside Debian, with the intent of merging the efforts.  Sorry for any
-confusion this might cause.
+alongside Debian, with the intent of merging the efforts.
 
 Enjoy,
 	Joachim Nilsson <troglobit()vmlinux!org>
 
-[1] - http://lists.debian.org/debian-devel/2000/05/msg00548.html
-[2] - http://packages.debian.org/sid/libeditline0
-

TODO

@@ -1,11 +1,35 @@
-TODO
+TODO                                                                 -*-org-*-
+
+Issues in need of work. Mostly compatibility with GNU readline, BSD libedit,
+http://www.thrysoee.dk/editline/, and usability improvements.
+
+Remember, the general idea is to keep Minix editline small.
+
+* Verify for 1.14.0 that custom completion handlers still work
+After reverting "fix" in 0.2.2 that made rl_complete() a function pointer we need to
+make sure the same functionality is still available with the new infrastructure.
+(Which is more inspired by BSD libedit and GNU readline.
+
+* Investigate GNU readline dependencies needed for "fileman" example
+The BSD libedit library has imported the GNU readline "fileman" example into its
+tree to demonstrate the abilities of that library.  This would also be quite useful
+for Minix editline.
+
+The first task is to investigate the depependencies and form TODO list items
+detailing what is missing and, if possible, proposals how to implement including any
+optional configure flags.
+
+* Instead of supporting multiline input, try the Emacs approach, line scrolling.
 
-* Port "fileman" example from BSD libedit, http://www.thrysoee.dk/editline/
 * Add support for rl_bind_key(), currently only en editline specific el_bind_key() exists.
-* Add support for inhibiting completion: rl_inhibit_completion
+
 * Make "char *rl_prompt" globally visible.
+
 * Add support for rl_set_prompt().
+
 * Add support for --enable-utf8 to configure
+
 * Use strcmp(nl_langinfo(CODESET), "UTF-8") to look for utf8 capable terminal.
+
 * Implement simple UTF-8 parser according to http://www.cl.cam.ac.uk/~mgk25/unicode.html#utf-8
 

configure

@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.65 for editline 1.14.0-rc1.
+# Generated by GNU Autoconf 2.65 for editline 1.14.0.
 #
 # Report bugs to <troglobit@vmlinux.org>.
 #
@@ -701,8 +701,8 @@ MAKEFLAGS=
 # Identity of this package.
 PACKAGE_NAME='editline'
 PACKAGE_TARNAME='editline'
-PACKAGE_VERSION='1.14.0-rc1'
-PACKAGE_STRING='editline 1.14.0-rc1'
+PACKAGE_VERSION='1.14.0'
+PACKAGE_STRING='editline 1.14.0'
 PACKAGE_BUGREPORT='troglobit@vmlinux.org'
 PACKAGE_URL=''
 
@@ -1424,7 +1424,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures editline 1.14.0-rc1 to adapt to many kinds of systems.
+\`configure' configures editline 1.14.0 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1494,7 +1494,7 @@ fi
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of editline 1.14.0-rc1:";;
+     short | recursive ) echo "Configuration of editline 1.14.0:";;
    esac
   cat <<\_ACEOF
 
@@ -1604,7 +1604,7 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-editline configure 1.14.0-rc1
+editline configure 1.14.0
 generated by GNU Autoconf 2.65
 
 Copyright (C) 2009 Free Software Foundation, Inc.
@@ -2029,7 +2029,7 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by editline $as_me 1.14.0-rc1, which was
+It was created by editline $as_me 1.14.0, which was
 generated by GNU Autoconf 2.65.  Invocation command line was
 
   $ $0 $@
@@ -2843,7 +2843,7 @@ fi
 
 # Define the identity of the package.
  PACKAGE='editline'
- VERSION='1.14.0-rc1'
+ VERSION='1.14.0'
 
 
 cat >>confdefs.h <<_ACEOF
@@ -11920,7 +11920,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by editline $as_me 1.14.0-rc1, which was
+This file was extended by editline $as_me 1.14.0, which was
 generated by GNU Autoconf 2.65.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
@@ -11986,7 +11986,7 @@ _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
-editline config.status 1.14.0-rc1
+editline config.status 1.14.0
 configured by $0, generated by GNU Autoconf 2.65,
   with options \\"\$ac_cs_config\\"
 

configure.ac

@@ -13,7 +13,7 @@
 # implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 
 AC_PREREQ(2.61)
-AC_INIT(editline, 1.14.0-rc1, troglobit@vmlinux.org)
+AC_INIT(editline, 1.14.0, troglobit@vmlinux.org)
 AC_CONFIG_SRCDIR([src/editline.c])
 AC_CONFIG_HEADER([config.h])
 AC_CONFIG_MACRO_DIR([m4])

debian/changelog

@@ -1,3 +1,9 @@
+editline (1.14.0-1) unstable; urgency=low
+
+  * Update to new configure based build.
+
+ -- Joachim Nilsson <joachim.nilsson@vmlinux.org>  Wed, 11 Aug 2010 13:28:00 +0100
+
 editline (1.12-6) unstable; urgency=low
 
   * Switch package format to 3.0 (quilt).

debian/editline1.files

@@ -1 +0,0 @@
-usr/lib/*.so.*

debian/libeditline-dev.install

@@ -0,0 +1,4 @@
+usr/include
+usr/lib/libeditline*.*a
+usr/lib/libeditline*.so
+usr/share/man/man3

debian/libeditline0.install

@@ -0,0 +1 @@
+usr/lib/libeditline*.so.*

debian/rules

@@ -1,5 +1,5 @@
 #!/usr/bin/make -f
-# Sample debian/rules that uses debhelper.
+# debian/rules for libeditline
 # GNU copyright 1997 to 1999 by Joey Hess.
 
 # Uncomment this to turn on verbose mode.
@@ -12,14 +12,12 @@ major=0
 build: build-stamp
 build-stamp:
 	dh_testdir
-	$(MAKE)
-	touch build-stamp
+	dh_auto_configure
+	dh_auto_build
 
 clean:
 	dh_testdir
-	dh_testroot
-	rm -f build-stamp
-	[ ! -f Makefile ] || $(MAKE) clean
+	dh_auto_clean
 	dh_clean
 
 install: build
@@ -27,29 +25,18 @@ install: build
 	dh_testroot
 	dh_clean -k
 	dh_installdirs
-	$(MAKE) install DESTDIR=`pwd`/debian/libeditline-dev
-	cp include_editline.h \
-	   `pwd`/debian/libeditline-dev/usr/include/editline.h
+	dh_auto_install
 
-binary-indep: build install
+binary-indep: install
 
-binary-arch: build install
+# build libeditline${major} package by moving files from editline-dev
+binary-arch: install
 	dh_testdir
 	dh_testroot
-	# build libeditline${major} package by moving files from editline-dev
-	dh_movefiles --sourcedir=debian/libeditline-dev \
-	             -plibeditline$(major) \
-	             usr/lib/libeditline.so.$(major) \
-	             usr/lib/libeditline.so.$(version)
+	dh_auto_install
+	dh_install --sourcedir=debian/tmp
 	dh_installdocs
-	dh_installexamples
-	dh_installmenu
-	dh_installmanpages
-	rm -rf debian/libeditline0/usr/share/man/
-	dh_installcron
-	dh_installinfo
 	dh_installchangelogs 
-	dh_link
 	dh_strip
 	dh_compress
 	dh_fixperms

include/editline.h

@@ -53,6 +53,7 @@ extern int         rl_list_possib(char *token, char ***av);
 extern int         rl_point;
 extern int         rl_mark;
 extern int         rl_end;
+extern int         rl_inhibit_complete;
 extern char       *rl_line_buffer;
 extern const char *rl_readline_name;
 extern FILE       *rl_instream;  /* The stdio stream from which input is read. Defaults to stdin if NULL - Not supported yet! */

src/editline.c

@@ -116,6 +116,7 @@ int               rl_point;
 int               rl_mark;
 int               rl_end;
 int               rl_meta_chars = 0; /* Display 8-bit chars as the actual char(0) or as `M-x'(1)? */
+int               rl_inhibit_complete = 0;
 char             *rl_line_buffer;
 const char       *rl_prompt;
 const char       *rl_readline_name;    /* Set by calling program, for conditional parsing of ~/.inputrc - Not supported yet! */
@@ -243,23 +244,6 @@ static void tty_backn(int n)
 
 static void tty_info(void)
 {
-    static int init;
-
-    if (init) {
-#ifdef TIOCGWINSZ
-	struct winsize W;
-
-        if (ioctl(el_outfd, TIOCGWINSZ, &W) >= 0 && W.ws_col > 0 && W.ws_row > 0) {
-            tty_cols = (int)W.ws_col;
-            tty_rows = (int)W.ws_row;
-        }
-#endif
-        return;
-    }
-    init++;
-
-    /* Initialize to faulty values to trigger fallback if nothing else works. */
-    tty_cols = tty_rows = -1;
     rl_reset_terminal(NULL);
 }
 
@@ -904,7 +888,15 @@ static el_status_t emacs(int c)
         if (kp->Key == c)
             break;
     }
-    s = kp->Function ? kp->Function() : insert_char(c);
+
+    if (kp->Function) {
+	s = kp->Function();
+	if (s == CSdispatch)	/* If Function is inhibited. */
+	    s = insert_char(c);
+    } else {
+	s = insert_char(c);
+    }
+
     if (!el_pushed) {
         /* No pushback means no repeat count; hacky, but true. */
         Repeat = NO_ARG;
@@ -1073,7 +1065,7 @@ static char *read_redirected(void)
 void rl_reset_terminal(const char *terminal_name)
 {
 #ifdef CONFIG_USE_TERMCAP
-    char                buff[2048];
+    char                buf[1024];
     char               *bp;
 #endif
 #ifdef TIOCGWINSZ
@@ -1082,15 +1074,16 @@ void rl_reset_terminal(const char *terminal_name)
 
     if (terminal_name) {
         el_term = terminal_name;
-	return;
+    } else if ((el_term = getenv("TERM")) == NULL) {
+        el_term = "dumb";
     }
 
-    if ((el_term = getenv("TERM")) == NULL)
-        el_term = "dumb";
+    /* Initialize to faulty values to trigger fallback if nothing else works. */
+    tty_cols = tty_rows = -1;
 
 #ifdef CONFIG_USE_TERMCAP
-    bp = buff;
-    if (-1 != tgetent(buff, el_term)) {
+    bp = buf;
+    if (-1 != tgetent(buf, el_term)) {
 	if ((backspace = tgetstr("le", &bp)) != NULL)
 	    backspace = strdup(backspace);
 	tty_cols = tgetnum("co");
@@ -1101,7 +1094,7 @@ void rl_reset_terminal(const char *terminal_name)
 
     if (tty_cols <= 0 || tty_rows <= 0) {
 #ifdef TIOCGWINSZ
-       if (-1 != ioctl(el_outfd, TIOCGWINSZ, &W)) {
+       if (ioctl(el_outfd, TIOCGWINSZ, &W) >= 0 && W.ws_col > 0 && W.ws_row > 0) {
           tty_cols = (int)W.ws_col;
           tty_rows = (int)W.ws_row;
           return;
@@ -1314,20 +1307,23 @@ static el_status_t c_complete(void)
     char        *word, *new;
     size_t      len;
     int         unique;
-    el_status_t s = 0;
+    el_status_t s = CSdone;
+
+    if (rl_inhibit_complete)
+	return CSdispatch;
 
     word = el_find_word();
-    p = (char *)rl_complete((char *)word, &unique);
+    p = rl_complete(word, &unique);
     if (word)
         free(word);
     if (p) {
-        len = strlen((char *)p);
+        len = strlen(p);
         word = p;
         new = q = malloc(sizeof(char) * (2 * len + 1));
 	if (!new)
 	    return CSstay;
         while (*p) {
-            if ((*p < ' ' || strchr(SEPS, (char) *p) != NULL)
+            if ((*p < ' ' || strchr(SEPS, *p) != NULL)
                                 && (!unique || p[1] != 0)) {
                 *q++ = '\\';
             }