version bump

I have a native package at this point, so I'll make new tags ONLY when a new
packaged release is cut. If this ever changes, a watch file will be re-added

Changes

@@ -0,0 +1,70 @@
+feedgnuplot (1.22)
+
+  * removed --size option
+
+ -- Dima Kogan <dima@secretsauce.net>  Mon, 03 Sep 2012 08:33:26 -0700
+
+feedgnuplot (1.21)
+
+  * removed the POD from the script to its own file
+  * fixed regression to allow no given extracmds, histogram or y2
+    options
+
+ -- Dima Kogan <dima@secretsauce.net>  Sun, 02 Sep 2012 23:52:21 -0700
+
+feedgnuplot (1.20)
+
+  * no longer hardcoding 'x11' as the default terminal
+  * added histogram support
+  * generic terminals can now be requested
+  * --extracmds, --histogram, --y2 can now take comma-separated lists
+
+ -- Dima Kogan <dima@secretsauce.net>  Fri, 31 Aug 2012 01:35:50 -0700
+
+feedgnuplot (1.19)
+
+  * added --geometry option to specify plot dimensions
+
+ -- Dima Kogan <dima@secretsauce.net>  Sat, 11 Feb 2012 21:04:42 -0800
+
+feedgnuplot (1.18)
+
+  * data-ids can now include characters such as -. Any non-whitespace
+    works
+
+ -- Dima Kogan <dima@secretsauce.net>  Tue, 27 Dec 2011 16:47:36 -0800
+
+feedgnuplot (1.17)
+
+  [ Dima Kogan ]
+  * POD: removed -Winteractive, since this was apparently a mawk-ism
+  * added zsh and bash completions
+
+  [ Hermann Schwarting ]
+  * add build dependency libtest-script-run-perl
+
+ -- Dima Kogan <dima@secretsauce.net>  Sun, 20 Nov 2011 19:17:22 -0800
+
+feedgnuplot (1.16)
+
+  * Some POD fixes
+
+ -- Dima Kogan <dima@secretsauce.net>  Fri, 11 Nov 2011 00:10:18 -0800
+
+feedgnuplot (1.15)
+
+  * Renamed main script from feedGnuplot to feedgnuplot
+
+ -- Dima Kogan <dima@secretsauce.net>  Sun, 16 Oct 2011 11:58:15 -0700
+
+feedgnuplot (1.14)
+
+  * added 'clear' command, documented commands
+
+ -- Dima Kogan <dima@secretsauce.net>  Sun, 22 May 2011 15:25:28 -0700
+
+feedgnuplot (1.13)
+
+  * Better streaming plot control
+
+ -- Dima Kogan <dima@secretsauce.net>  Tue, 26 Apr 2011 14:24:09 -0700

INSTALL

@@ -1,8 +1,9 @@
 If running on a Debian-based OS (this includes Ubuntu), it is highly recommended
 to install this program as a package by doing
 
+   ln -fs package_definitions/debian debian
    dpkg-buildpackage -us -uc -b
-   sudo dpkg -i feedgnuplot*.deb
+   sudo dpkg -i ../feedgnuplot*.deb
 
 This builds a debian package and installs it.
 

LICENSE

@@ -0,0 +1,8 @@
+This library is distributed under the terms of the GNU GPL:
+
+http://www.gnu.org/licenses/gpl.html
+
+
+or the Artistic license:
+
+http://dev.perl.org/licenses/artistic.html

MANIFEST

@@ -1,5 +1,8 @@
 Makefile.PL
 MANIFEST
 bin/feedgnuplot
+bin/feedgnuplot.pod
 t/00-load.t
 t/manifest.t
+Changes
+LICENSE

Makefile.PL

@@ -4,14 +4,14 @@ use ExtUtils::MakeMaker;
 
 sub parseversion
 {
-# grab the version number from the debian changelog file. I look for lines line
+# grab the version number from the changelog. I look for lines line
 #
-# libpackage-perl (0.02) unstable; urgency=low
+# libpackage-perl (0.02)
 #
 # I parse out the 0.02 part
-  open DCH, 'debian/changelog' or die "Couldn't open debian/changelog";
+  open DCH, 'Changes' or die "Couldn't open 'Changes'";
   my ($version) = <DCH> =~ /^\S+ \s* \( ([0-9\.]+) \)/x
-    or die "Couldn't parse version from debian/changelog";
+    or die "Couldn't parse version from 'Changes'";
   close DCH;
 
   return $version;
@@ -23,37 +23,33 @@ sub MY::libscan
 
     my ($self, $file) = @_;
 
-    # Don't install the README.pod or any non-feedgnuplot .pl file
-    return undef if $file !~ /feedgnuplot.pl/ && $file =~ /\.pl$|^README.pod/;
+    # Don't install any symlinks (i.e. README.pod)
+    return undef if -l $file;
 
     return $self->SUPER::libscan ($file);
 }
 
+# I want my manpage to go into the man section '1', NOT '1p'. Here I add a
+# snippet to the end of the generated Makefile to force this
+sub MY::postamble
+{
+  return "MAN1EXT := 1\n";
+}
+
+
 WriteMakefile
   (
    NAME                       => 'feedgnuplot',
    AUTHOR                     => q{Dima Kogan <dima@secretsauce.net>},
    VERSION                    => parseversion(),
-   ABSTRACT_FROM              => 'bin/feedgnuplot',
+   ABSTRACT_FROM              => 'bin/feedgnuplot.pod',
    ($ExtUtils::MakeMaker::VERSION >= 6.3002
     ? ('LICENSE'              => 'perl')
     : ()),
    PL_FILES                   => {},
    EXE_FILES                  => [ 'bin/feedgnuplot' ],
+   MAN1PODS                   => { 'bin/feedgnuplot.pod' => 'blib/man1/feedgnuplot.1' },
    PREREQ_PM                  => { 'Test::Script::Run' => 0},
    dist                       => { COMPRESS => 'gzip -9f', SUFFIX => 'gz', },
    clean                      => { FILES => 'feedgnuplot-*' },
   );
-
-# reroute the main POD into a separate README.pod if requested. This is here
-# purely to generate a README.pod for the github front page
-if(exists $ARGV[0] && $ARGV[0] eq 'README.pod')
-{
-  open SCRIPT, 'bin/feedgnuplot' or die "Couldn't open main script";
-  open README, '>README.pod'     or die "Couldn't open README.pod";
-  while (<SCRIPT>)
-  {
-    if (/^=/../^=cut/)
-    { print README; }
-  }
-}

README.pod

@@ -1,364 +0,0 @@
-=head1 NAME
-
-feedgnuplot - Pipe-oriented frontend to Gnuplot
-
-=head1 SYNOPSIS
-
-Simple plotting of stored data:
-
- $ seq 5 | awk '{print 2*$1, $1*$1}'
- 2 1
- 4 4
- 6 9
- 8 16
- 10 25
-
- $ seq 5 | awk '{print 2*$1, $1*$1}' |
-   feedgnuplot --lines --points --legend 0 "data 0" --title "Test plot" --y2 1
-
-Simple real-time plotting example: plot how much data is received on the wlan0
-network interface in bytes/second (uses bash, awk and Linux):
-
- $ while true; do sleep 1; cat /proc/net/dev; done |
-   gawk '/wlan0/ {if(b) {print $2-b; fflush()} b=$2}' |
-   feedgnuplot --lines --stream --xlen 10 --ylabel 'Bytes/sec' --xlabel seconds
-
-=head1 DESCRIPTION
-
-This is a flexible, command-line-oriented frontend to Gnuplot. It creates
-plots from data coming in on STDIN or given in a filename passed on the
-commandline. Various data representations are supported, as is hardcopy
-output and streaming display of live data. A simple example:
-
- $ seq 5 | awk '{print 2*$1, $1*$1}' | feedgnuplot
-
-You should see a plot with two curves. The C<awk> command generates some data to
-plot and the C<feedgnuplot> reads it in from STDIN and generates the plot. The
-C<awk> invocation is just an example; more interesting things would be plotted
-in normal usage. No commandline-options are required for the most basic
-plotting. Input parsing is flexible; every line need not have the same number of
-points. New curves will be created as needed.
-
-The most commonly used functionality of gnuplot is supported directly by the
-script. Anything not directly supported can still be done with the
-C<--extracmds> and C<--curvestyle> options. Arbitrary gnuplot commands can be
-passed in with C<--extracmds>. For example, to turn off the grid, pass in
-C<--extracmds 'unset grid'>. As many of these options as needed can be passed
-in. To add arbitrary curve styles, use C<--curvestyle curveID extrastyle>. Pass
-these more than once to affect more than one curve. To apply an extra style to
-I<all> the curves, pass in C<--curvestyleall extrastyle>.
-
-=head2 Data formats
-
-By default, each value present in the incoming data represents a distinct data
-point, as demonstrated in the original example above (we had 10 numbers in the
-input and 10 points in the plot). If requested, the script supports more
-sophisticated interpretation of input data
-
-=head3 Domain selection
-
-If C<--domain> is passed in, the first value on each line of input is
-interpreted as the I<X>-value for the rest of the data on that line. Without
-C<--domain> the I<X>-value is the line number, and the first value on a line is
-a plain data point like the others. Default is C<--nodomain>. Thus the original
-example above produces 2 curves, with B<1,2,3,4,5> as the I<X>-values. If we run
-the same command with --domain:
-
- $ seq 5 | awk '{print 2*$1, $1*$1}' | feedgnuplot --domain
-
-we get only 1 curve, with B<2,4,6,8,10> as the I<X>-values. As many points as
-desired can appear on a single line, but all points on a line are associated
-with the I<X>-value at the start of that line.
-
-=head3 Curve indexing
-
-By default, each column represents a separate curve. This is fine unless sparse
-data is to be plotted. With the C<--dataid> option, each point is represented by
-2 values: a string identifying the curve, and the value itself. If we add
-C<--dataid> to the original example:
-
- $ seq 5 | awk '{print 2*$1, $1*$1}' | feedgnuplot --dataid --autolegend
-
-we get 5 different curves with one point in each. The first column, as produced
-by C<awk>, is B<2,4,6,8,10>. These are interpreted as the IDs of the curves to
-be plotted. The C<--autolegend> option adds a legend using the given IDs to
-label the curves. The IDs need not be numbers; generic strings are accepted. As
-many points as desired can appear on a single line. C<--domain> can be used in
-conjunction with C<--dataid>.
-
-=head3 Multi-value style support
-
-Depending on how gnuplot is plotting the data, more than one value may be needed
-to represent a single point. For example, the script has support to plot all the
-data with C<--circles>. This requires a radius to be specified for each point in
-addition to the position of the point. Thus, when plotting with C<--circles>, 2
-numbers are read for each data point instead of 1. A similar situation exists
-with C<--colormap> where each point contains the position I<and> the
-color. There are other gnuplot styles that require more data (such as error
-bars), but none of these are directly supported by the script. They can still be
-used, though, by specifying the specific style with C<--curvestyle>, and
-specifying how many extra values are needed for each point with
-C<--extraValuesPerPoint extra>. C<--extraValuesPerPoint> is ONLY needed for the
-styles not explicitly supported; supported styles set that variable
-automatically.
-
-=head3 3D data
-
-To plot 3D data, pass in C<--3d>. C<--domain> MUST be given when plotting 3D
-data to avoid domain ambiguity. If 3D data is being plotted, there are by
-definition 2 domain values instead of one (I<Z> as a function of I<X> and I<Y>
-instead of I<Y> as a function of I<X>). Thus the first 2 values on each line are
-interpreted as the domain instead of just 1. The rest of the processing happens
-the same way as before.
-
-=head3 Special data commands
-
-Other than the raw data, 2 special commands are interpreted if they appear in
-the input. These are C<replot> and C<clear>. If a line of data begins with
-C<replot> and we're plotting in realtime with C<--stream>, the plot will be
-refreshed immediately. If a line of data begins with C<clear>, the plot is
-cleared, to be re-filled with any data following the C<clear>.
-
-=head2 Real-time streaming data
-
-To plot real-time data, pass in the C<--stream [refreshperiod]> option. Data
-will then be plotted as it is received. The plot will be updated every
-C<refreshperiod> seconds. If the period isn't specified, a 1Hz refresh rate is
-used. To refresh at specific intervals indicated by the data, set the
-refreshperiod to 0 or to 'trigger'. The plot will then I<only> be refreshed when
-a data line 'replot' is received. This 'replot' command works in both triggered
-and timed modes, but in triggered mode, it's the only way to replot.
-
-To plot only the most recent data (instead of I<all> the data), C<--xlen
-windowsize> can be given. This will create an constantly-updating, scrolling
-view of the recent past. C<windowsize> should be replaced by the desired length
-of the domain window to plot, in domain units (passed-in values if C<--domain>
-or line numbers otherwise).
-
-=head2 Hardcopy output
-
-The script is able to produce hardcopy output with C<--hardcopy outputfile>. The
-output type is inferred from the filename with B<.ps>, B<.eps>, B<.pdf> and
-B<.png> currently supported.
-
-=head2 Self-plotting data files
-
-This script can be used to enable self-plotting data files. There are 2 ways of
-doing this: with a shebang (#!) or with inline perl data.
-
-=head3 Self-plotting data with a #!
-
-A self-plotting, executable data file C<data> is formatted as
-
- $ cat data
- #!/usr/bin/feedgnuplot --lines --points
- 2 1
- 4 4
- 6 9
- 8 16
- 10 25
- 12 36
- 14 49
- 16 64
- 18 81
- 20 100
- 22 121
- 24 144
- 26 169
- 28 196
- 30 225
-
-This is the shebang (#!) line followed by the data, formatted as before. The
-data file can be plotted simply with
-
- $ ./data
-
-The caveats here are that on Linux the whole #! line is limited to 127 charaters
-and that the full path to feedgnuplot must be given. The 127 character limit is
-a serious limitation, but this can likely be resolved with a kernel patch. I
-have only tried on Linux 2.6.
-
-=head3 Self-plotting data with perl inline data
-
-Perl supports storing data and code in the same file. This can also be used to
-create self-plotting files:
-
- $ cat plotdata.pl
- #!/usr/bin/perl
- use strict;
- use warnings;
-
- open PLOT, "| feedgnuplot --lines --points" or die "Couldn't open plotting pipe";
- while( <DATA> )
- {
-   my @xy = split;
-   print PLOT "@xy\n";
- }
- __DATA__
- 2 1
- 4 4
- 6 9
- 8 16
- 10 25
- 12 36
- 14 49
- 16 64
- 18 81
- 20 100
- 22 121
- 24 144
- 26 169
- 28 196
- 30 225
-
-This is especially useful if the logged data is not in a format directly
-supported by feedgnuplot. Raw data can be stored after the __DATA__ directive,
-with a small perl script to manipulate the data into a useable format and send
-it to the plotter.
-
-=head1 ARGUMENTS
-
-  --[no]domain         If enabled, the first element of each line is the
-                       domain variable.  If not, the point index is used
-
-  --[no]dataid         If enabled, each data point is preceded by the ID
-                       of the data set that point corresponds to. This ID is
-                       interpreted as a string, NOT as just a number. If not
-                       enabled, the order of the point is used.
-
-As an example, if line 3 of the input is "0 9 1 20"
- '--nodomain --nodataid' would parse the 4 numbers as points in 4
-   different curves at x=3
-
- '--domain --nodataid' would parse the 4 numbers as points in 3 different
-   curves at x=0. Here, 0 is the x-variable and 9,1,20 are the data values
-
- '--nodomain --dataid' would parse the 4 numbers as points in 2 different
-   curves at x=3. Here 0 and 1 are the data IDs and 9 and 20 are the
-   data values
-
- '--domain --dataid' would parse the 4 numbers as a single point at
-   x=0. Here 9 is the data ID and 1 is the data value. 20 is an extra
-   value, so it is ignored. If another value followed 20, we'd get another
-   point in curve ID 20
-
-  --[no]3d             Do [not] plot in 3D. This only makes sense with --domain.
-                       Each domain here is an (x,y) tuple
-
-  --colormap           Show a colormapped xy plot. Requires extra data for the color.
-                       zmin/zmax can be used to set the extents of the colors.
-                       Automatically increments extraValuesPerPoint
-
-  --stream [period]    Plot the data as it comes in, in realtime. If period is given,
-                       replot every period seconds. If no period is given, replot at
-                       1Hz. If the period is given as 0 or 'trigger', replot ONLY when
-                       the incoming data dictates this . See the "Real-time streaming
-                       data" section of the man page.
-
-  --[no]lines          Do [not] draw lines to connect consecutive points
-  --[no]points         Do [not] draw points
-  --circles            Plot with circles. This requires a radius be specified for
-                       each point. Automatically increments extraValuesPerPoint
-
-  --xlabel xxx         Set x-axis label
-  --ylabel xxx         Set y-axis label
-  --y2label xxx        Set y2-axis label. Does not apply to 3d plots
-  --zlabel xxx         Set y-axis label. Only applies to 3d plots
-
-  --title  xxx         Set the title of the plot
-
-  --legend curveID legend
-                       Set the label for a curve plot. Use this option multiple times
-                       for multiple curves. With --dataid, curveID is the ID. Otherwise,
-                       it's the index of the curve, starting at 0
-
-  --autolegend         Use the curve IDs for the legend. Titles given with --legend
-                       override these
-
-  --xlen xxx           When using --stream, sets the size of the x-window to plot.
-                       Omit this or set it to 0 to plot ALL the data. Does not
-                       make sense with 3d plots. Implies --monotonic
-
-  --xmin  xxx          Set the range for the x axis. These are ignored in a
-                       streaming plot
-  --xmax  xxx          Set the range for the x axis. These are ignored in a
-                       streaming plot
-  --ymin  xxx          Set the range for the y axis.
-  --ymax  xxx          Set the range for the y axis.
-  --y2min xxx          Set the range for the y2 axis. Does not apply to 3d plots.
-  --y2max xxx          Set the range for the y2 axis. Does not apply to 3d plots.
-  --zmin  xxx          Set the range for the z axis. Only applies to 3d plots or colormaps.
-  --zmax  xxx          Set the range for the z axis. Only applies to 3d plots or colormaps.
-
-  --y2    xxx          Plot the data specified by this curve ID on the y2 axis.
-                       Without --dataid, the ID is just an ordered 0-based index.
-                       Does not apply to 3d plots.
-
-  --curvestyle curveID style
-                       Additional styles per curve. With --dataid, curveID is the
-                       ID. Otherwise, it's the index of the curve, starting at 0. Use
-                       this option multiple times for multiple curves
-
-  --curvestyleall xxx  Additional styles for ALL curves.
-
-  --extracmds xxx      Additional commands. These could contain extra global styles
-                       for instance
-
-  --size  xxx          Gnuplot size option
-
-  --square             Plot data with aspect ratio 1. For 3D plots, this controls the
-                       aspect ratio for all 3 axes
-
-  --square_xy          For 3D plots, set square aspect ratio for ONLY the x,y axes
-
-  --hardcopy xxx       If not streaming, output to a file specified here. Format
-                       inferred from filename
-
-  --maxcurves xxx      The maximum allowed number of curves. This is 100 by default,
-                       but can be reset with this option. This exists purely to
-                       prevent perl from allocating all of the system's memory when
-                       reading bogus data
-
-  --monotonic          If --domain is given, checks to make sure that the x-
-                       coordinate in the input data is monotonically increasing.
-                       If a given x-variable is in the past, all data currently
-                       cached for this curve is purged. Without --monotonic, all
-                       data is kept. Does not make sense with 3d plots.
-                       No --monotonic by default.
-
-  --extraValuesPerPoint xxx
-                       How many extra values are given for each data point. Normally this
-                       is 0, and does not need to be specified, but sometimes we want
-                       extra data, like for colors or point sizes or error bars, etc.
-                       feedgnuplot options that require this (colormap, circles)
-                       automatically set it. This option is ONLY needed if unknown styles are
-                       used, with --curvestyleall for instance
-
-  --dump               Instead of printing to gnuplot, print to STDOUT. For
-                       debugging.
-
-=head1 ACKNOWLEDGEMENT
-
-This program is originally based on the driveGnuPlots.pl script from
-Thanassis Tsiodras. It is available from his site at
-L<http://users.softlab.ece.ntua.gr/~ttsiod/gnuplotStreaming.html>
-
-=head1 REPOSITORY
-
-L<https://github.com/dkogan/feedgnuplot>
-
-=head1 AUTHOR
-
-Dima Kogan, C<< <dima@secretsauce.net> >>
-
-=head1 LICENSE AND COPYRIGHT
-
-Copyright 2011 Dima Kogan.
-
-This program is free software; you can redistribute it and/or modify it
-under the terms of either: the GNU General Public License as published
-by the Free Software Foundation; or the Artistic License.
-
-See http://dev.perl.org/licenses/ for more information.
-
-=cut

README.pod

@@ -0,0 +1 @@
+bin/feedgnuplot.pod

bin/feedgnuplot

@@ -89,7 +89,9 @@ sub interpretCommandline
   # do not stream in the data by default
   # point plotting by default.
   # no monotonicity checks by default
+  # normal histograms by default
   $options{ maxcurves } = 100;
+  $options{ histstyle}  = 'freq';
 
   # Previously I was using 'legend=s%' and 'curvestyle=s%' for curve addressing. This had cleaner
   # syntax, but disregarded the order of the given options. This resulted in arbitrarily ordered
@@ -97,12 +99,16 @@ sub interpretCommandline
   # needed for these to be parsed into a ref to a list
   $options{legend}     = [];
   $options{curvestyle} = [];
+  $options{histogram}  = [];
   GetOptions($options, 'stream:s', 'domain!', 'dataid!', '3d!', 'colormap!', 'lines!', 'points!',
              'circles', 'legend=s{2}', 'autolegend!', 'xlabel=s', 'ylabel=s', 'y2label=s', 'zlabel=s',
              'title=s', 'xlen=f', 'ymin=f', 'ymax=f', 'xmin=f', 'xmax=f', 'y2min=f', 'y2max=f',
              'zmin=f', 'zmax=f', 'y2=s@', 'curvestyle=s{2}', 'curvestyleall=s', 'extracmds=s@',
-             'size=s', 'square!', 'square_xy!', 'hardcopy=s', 'maxcurves=i', 'monotonic!',
-             'extraValuesPerPoint=i', 'help', 'dump') or pod2usage(1);
+             'square!', 'square_xy!', 'hardcopy=s', 'maxcurves=i', 'monotonic!',
+             'histogram=s@', 'binwidth=f', 'histstyle=s',
+             'terminal=s',
+             'extraValuesPerPoint=i', 'help', 'dump',
+             'geometry=s') or pod2usage(1);
 
   # handle various cmdline-option errors
   if ( $options->{help} )
@@ -111,6 +117,13 @@ sub interpretCommandline
   # no global style if one isn't given
   $options->{curvestyleall} = '' unless defined $options->{curvestyleall};
 
+  # expand options that are given as comma-separated lists
+  for my $listkey (qw(extracmds histogram y2))
+  {
+    @{$options{$listkey}} = map split('\s*,\s*', $_), @{$options{$listkey}}
+      if defined $options{$listkey};
+  }
+
   # parse stream option. Allowed only numbers >= 0 or 'trigger'
   if(defined $options->{stream})
   {
@@ -176,6 +189,12 @@ sub interpretCommandline
       print STDERR "--3d does not make sense with --monotonic\n";
       exit -1;
     }
+
+    if ( defined $options->{binwidth} || @{$options->{histogram}} )
+    {
+      print STDERR "--3d does not make sense with histograms\n";
+      exit -1;
+    }
   }
   else
   {
@@ -203,6 +222,12 @@ sub interpretCommandline
 
   # --xlen implies an order to the data, so I force monotonicity
   $options{monotonic} = 1 if defined $options{xlen};
+
+  if( $options{histstyle} !~ /freq|cum|uniq|cnorm/ )
+  {
+    print STDERR "unknown histstyle. Allowed are 'freq...', 'cum...', 'uniq...', 'cnorm...'\n";
+    exit -1;
+  }
 }
 
 sub getGnuplotVersion
@@ -252,7 +277,9 @@ sub mainThread
     }
     else
     {
-      open PIPE, "|gnuplot $dopersist" or die "Can't initialize gnuplot\n";
+      my $geometry = defined $options{geometry} ?
+        "-geometry $options{geometry}" : '';
+      open PIPE, "|gnuplot $geometry $dopersist" or die "Can't initialize gnuplot\n";
     }
     autoflush PIPE 1;
 
@@ -261,22 +288,25 @@ sub mainThread
     if( $options{hardcopy})
     {
       $outputfile = $options{hardcopy};
-      ($outputfileType) = $outputfile =~ /\.(eps|ps|pdf|png)$/;
-      if(!$outputfileType) { die("Only .eps, .ps, .pdf and .png supported\n"); }
+      $outputfile =~ /\.(eps|ps|pdf|png|svg)$/i;
+      $outputfileType = $1 ? lc $1 : '';
 
       my %terminalOpts =
       ( eps  => 'postscript solid color enhanced eps',
         ps   => 'postscript solid color landscape 10',
         pdf  => 'pdfcairo solid color font ",10" size 11in,8.5in',
-        png  => 'png size 1280,1024' );
+        png  => 'png size 1280,1024',
+        svg  => 'svg');
 
-      print PIPE "set terminal $terminalOpts{$outputfileType}\n";
-      print PIPE "set output \"$outputfile\"\n";
-    }
-    else
-    {
-      print PIPE "set terminal x11\n";
+      $options{terminal} ||= $terminalOpts{$outputfileType}
+        if $terminalOpts{$outputfileType};
+
+      die "Asked to plot to file '$outputfile', but I don't know which terminal to use, and no --terminal given"
+        unless $options{terminal};
     }
+    print PIPE "set terminal $options{terminal}\n" if $options{terminal};
+    print PIPE "set output \"$outputfile\"\n"      if $outputfile;
+
 
     # If a bound isn't given I want to set it to the empty string, so I can communicate it simply to
     # gnuplot
@@ -325,15 +355,13 @@ sub mainThread
       # set a square aspect ratio. Gnuplot does this differently for 2D and 3D plots
       if(! $options{'3d'})
       {
-        $options{size} = '' unless defined $options{size};
-        $options{size} .= ' ratio -1';
+        print(PIPE "set size ratio -1\n");
       }
       else
       {
         print(PIPE "set view equal xyz\n");
       }
     }
-    print(PIPE "set size $options{size}\n")                     if defined $options{size};
 
     if($options{square_xy})
     {
@@ -384,6 +412,16 @@ sub mainThread
       }
     }
 
+# set up histograms
+    $options{binwidth} ||= 1; # if no binwidth given, set it to 1
+    print PIPE
+      "set boxwidth $options{binwidth}\n" .
+      "histbin(x) = $options{binwidth} * floor(0.5 + x/$options{binwidth})\n";
+    foreach (@{$options{histogram}})
+    {
+      setCurveAsHistogram( $_ );
+    }
+
     # regexp for a possibly floating point, possibly scientific notation number
     my $numRE   = '-?\d*\.?\d+(?:[Ee][-+]?\d+)?';
 
@@ -561,7 +599,9 @@ sub updateCurveOptions
 
   my $titleoption = defined $title ? "title \"$title\"" : "notitle";
   my $extraoption = defined $options{curvestyleall} ? $options{curvestyleall} : '';
-  $curveoptions->{options} = "$titleoption $curveoptions->{extraoptions} $extraoption";
+  my $histoptions = $curveoptions->{histoptions} || '';
+
+  $curveoptions->{options} = "$histoptions $titleoption $curveoptions->{extraoptions} $extraoption";
 }
 
 sub getCurve
@@ -606,6 +646,16 @@ sub setCurveLabel
   updateCurveOptions($curve->[0], $id);
 }
 
+sub setCurveAsHistogram
+{
+  my ($id, $str) = @_;
+
+  my $curve = getCurve($id);
+  $curve->[0]{histoptions} = 'using (histbin($2)):(1.0) smooth ' . $options{histstyle};
+
+  updateCurveOptions($curve->[0], $id);
+}
+
 # remove all the curve data
 sub clearCurves
 {
@@ -619,370 +669,3 @@ sub pushPoint
   my ($curve, $xy) = @_;
   push @$curve, $xy;
 }
-
-__END__
-
-=head1 NAME
-
-feedgnuplot - Pipe-oriented frontend to Gnuplot
-
-=head1 SYNOPSIS
-
-Simple plotting of stored data:
-
- $ seq 5 | awk '{print 2*$1, $1*$1}'
- 2 1
- 4 4
- 6 9
- 8 16
- 10 25
-
- $ seq 5 | awk '{print 2*$1, $1*$1}' |
-   feedgnuplot --lines --points --legend 0 "data 0" --title "Test plot" --y2 1
-
-Simple real-time plotting example: plot how much data is received on the wlan0
-network interface in bytes/second (uses bash, awk and Linux):
-
- $ while true; do sleep 1; cat /proc/net/dev; done |
-   gawk '/wlan0/ {if(b) {print $2-b; fflush()} b=$2}' |
-   feedgnuplot --lines --stream --xlen 10 --ylabel 'Bytes/sec' --xlabel seconds
-
-=head1 DESCRIPTION
-
-This is a flexible, command-line-oriented frontend to Gnuplot. It creates
-plots from data coming in on STDIN or given in a filename passed on the
-commandline. Various data representations are supported, as is hardcopy
-output and streaming display of live data. A simple example:
-
- $ seq 5 | awk '{print 2*$1, $1*$1}' | feedgnuplot
-
-You should see a plot with two curves. The C<awk> command generates some data to
-plot and the C<feedgnuplot> reads it in from STDIN and generates the plot. The
-C<awk> invocation is just an example; more interesting things would be plotted
-in normal usage. No commandline-options are required for the most basic
-plotting. Input parsing is flexible; every line need not have the same number of
-points. New curves will be created as needed.
-
-The most commonly used functionality of gnuplot is supported directly by the
-script. Anything not directly supported can still be done with the
-C<--extracmds> and C<--curvestyle> options. Arbitrary gnuplot commands can be
-passed in with C<--extracmds>. For example, to turn off the grid, pass in
-C<--extracmds 'unset grid'>. As many of these options as needed can be passed
-in. To add arbitrary curve styles, use C<--curvestyle curveID extrastyle>. Pass
-these more than once to affect more than one curve. To apply an extra style to
-I<all> the curves, pass in C<--curvestyleall extrastyle>.
-
-=head2 Data formats
-
-By default, each value present in the incoming data represents a distinct data
-point, as demonstrated in the original example above (we had 10 numbers in the
-input and 10 points in the plot). If requested, the script supports more
-sophisticated interpretation of input data
-
-=head3 Domain selection
-
-If C<--domain> is passed in, the first value on each line of input is
-interpreted as the I<X>-value for the rest of the data on that line. Without
-C<--domain> the I<X>-value is the line number, and the first value on a line is
-a plain data point like the others. Default is C<--nodomain>. Thus the original
-example above produces 2 curves, with B<1,2,3,4,5> as the I<X>-values. If we run
-the same command with --domain:
-
- $ seq 5 | awk '{print 2*$1, $1*$1}' | feedgnuplot --domain
-
-we get only 1 curve, with B<2,4,6,8,10> as the I<X>-values. As many points as
-desired can appear on a single line, but all points on a line are associated
-with the I<X>-value at the start of that line.
-
-=head3 Curve indexing
-
-By default, each column represents a separate curve. This is fine unless sparse
-data is to be plotted. With the C<--dataid> option, each point is represented by
-2 values: a string identifying the curve, and the value itself. If we add
-C<--dataid> to the original example:
-
- $ seq 5 | awk '{print 2*$1, $1*$1}' | feedgnuplot --dataid --autolegend
-
-we get 5 different curves with one point in each. The first column, as produced
-by C<awk>, is B<2,4,6,8,10>. These are interpreted as the IDs of the curves to
-be plotted. The C<--autolegend> option adds a legend using the given IDs to
-label the curves. The IDs need not be numbers; generic strings are accepted. As
-many points as desired can appear on a single line. C<--domain> can be used in
-conjunction with C<--dataid>.
-
-=head3 Multi-value style support
-
-Depending on how gnuplot is plotting the data, more than one value may be needed
-to represent a single point. For example, the script has support to plot all the
-data with C<--circles>. This requires a radius to be specified for each point in
-addition to the position of the point. Thus, when plotting with C<--circles>, 2
-numbers are read for each data point instead of 1. A similar situation exists
-with C<--colormap> where each point contains the position I<and> the
-color. There are other gnuplot styles that require more data (such as error
-bars), but none of these are directly supported by the script. They can still be
-used, though, by specifying the specific style with C<--curvestyle>, and
-specifying how many extra values are needed for each point with
-C<--extraValuesPerPoint extra>. C<--extraValuesPerPoint> is ONLY needed for the
-styles not explicitly supported; supported styles set that variable
-automatically.
-
-=head3 3D data
-
-To plot 3D data, pass in C<--3d>. C<--domain> MUST be given when plotting 3D
-data to avoid domain ambiguity. If 3D data is being plotted, there are by
-definition 2 domain values instead of one (I<Z> as a function of I<X> and I<Y>
-instead of I<Y> as a function of I<X>). Thus the first 2 values on each line are
-interpreted as the domain instead of just 1. The rest of the processing happens
-the same way as before.
-
-=head3 Special data commands
-
-Other than the raw data, 2 special commands are interpreted if they appear in
-the input. These are C<replot> and C<clear>. If a line of data begins with
-C<replot> and we're plotting in realtime with C<--stream>, the plot will be
-refreshed immediately. If a line of data begins with C<clear>, the plot is
-cleared, to be re-filled with any data following the C<clear>.
-
-=head2 Real-time streaming data
-
-To plot real-time data, pass in the C<--stream [refreshperiod]> option. Data
-will then be plotted as it is received. The plot will be updated every
-C<refreshperiod> seconds. If the period isn't specified, a 1Hz refresh rate is
-used. To refresh at specific intervals indicated by the data, set the
-refreshperiod to 0 or to 'trigger'. The plot will then I<only> be refreshed when
-a data line 'replot' is received. This 'replot' command works in both triggered
-and timed modes, but in triggered mode, it's the only way to replot.
-
-To plot only the most recent data (instead of I<all> the data), C<--xlen
-windowsize> can be given. This will create an constantly-updating, scrolling
-view of the recent past. C<windowsize> should be replaced by the desired length
-of the domain window to plot, in domain units (passed-in values if C<--domain>
-or line numbers otherwise).
-
-=head2 Hardcopy output
-
-The script is able to produce hardcopy output with C<--hardcopy outputfile>. The
-output type is inferred from the filename with B<.ps>, B<.eps>, B<.pdf> and
-B<.png> currently supported.
-
-=head2 Self-plotting data files
-
-This script can be used to enable self-plotting data files. There are 2 ways of
-doing this: with a shebang (#!) or with inline perl data.
-
-=head3 Self-plotting data with a #!
-
-A self-plotting, executable data file C<data> is formatted as
-
- $ cat data
- #!/usr/bin/feedgnuplot --lines --points
- 2 1
- 4 4
- 6 9
- 8 16
- 10 25
- 12 36
- 14 49
- 16 64
- 18 81
- 20 100
- 22 121
- 24 144
- 26 169
- 28 196
- 30 225
-
-This is the shebang (#!) line followed by the data, formatted as before. The
-data file can be plotted simply with
-
- $ ./data
-
-The caveats here are that on Linux the whole #! line is limited to 127 charaters
-and that the full path to feedgnuplot must be given. The 127 character limit is
-a serious limitation, but this can likely be resolved with a kernel patch. I
-have only tried on Linux 2.6.
-
-=head3 Self-plotting data with perl inline data
-
-Perl supports storing data and code in the same file. This can also be used to
-create self-plotting files:
-
- $ cat plotdata.pl
- #!/usr/bin/perl
- use strict;
- use warnings;
-
- open PLOT, "| feedgnuplot --lines --points" or die "Couldn't open plotting pipe";
- while( <DATA> )
- {
-   my @xy = split;
-   print PLOT "@xy\n";
- }
- __DATA__
- 2 1
- 4 4
- 6 9
- 8 16
- 10 25
- 12 36
- 14 49
- 16 64
- 18 81
- 20 100
- 22 121
- 24 144
- 26 169
- 28 196
- 30 225
-
-This is especially useful if the logged data is not in a format directly
-supported by feedgnuplot. Raw data can be stored after the __DATA__ directive,
-with a small perl script to manipulate the data into a useable format and send
-it to the plotter.
-
-=head1 ARGUMENTS
-
-  --[no]domain         If enabled, the first element of each line is the
-                       domain variable.  If not, the point index is used
-
-  --[no]dataid         If enabled, each data point is preceded by the ID
-                       of the data set that point corresponds to. This ID is
-                       interpreted as a string, NOT as just a number. If not
-                       enabled, the order of the point is used.
-
-As an example, if line 3 of the input is "0 9 1 20"
- '--nodomain --nodataid' would parse the 4 numbers as points in 4
-   different curves at x=3
-
- '--domain --nodataid' would parse the 4 numbers as points in 3 different
-   curves at x=0. Here, 0 is the x-variable and 9,1,20 are the data values
-
- '--nodomain --dataid' would parse the 4 numbers as points in 2 different
-   curves at x=3. Here 0 and 1 are the data IDs and 9 and 20 are the
-   data values
-
- '--domain --dataid' would parse the 4 numbers as a single point at
-   x=0. Here 9 is the data ID and 1 is the data value. 20 is an extra
-   value, so it is ignored. If another value followed 20, we'd get another
-   point in curve ID 20
-
-  --[no]3d             Do [not] plot in 3D. This only makes sense with --domain.
-                       Each domain here is an (x,y) tuple
-
-  --colormap           Show a colormapped xy plot. Requires extra data for the color.
-                       zmin/zmax can be used to set the extents of the colors.
-                       Automatically increments extraValuesPerPoint
-
-  --stream [period]    Plot the data as it comes in, in realtime. If period is given,
-                       replot every period seconds. If no period is given, replot at
-                       1Hz. If the period is given as 0 or 'trigger', replot ONLY when
-                       the incoming data dictates this . See the "Real-time streaming
-                       data" section of the man page.
-
-  --[no]lines          Do [not] draw lines to connect consecutive points
-  --[no]points         Do [not] draw points
-  --circles            Plot with circles. This requires a radius be specified for
-                       each point. Automatically increments extraValuesPerPoint
-
-  --xlabel xxx         Set x-axis label
-  --ylabel xxx         Set y-axis label
-  --y2label xxx        Set y2-axis label. Does not apply to 3d plots
-  --zlabel xxx         Set y-axis label. Only applies to 3d plots
-
-  --title  xxx         Set the title of the plot
-
-  --legend curveID legend
-                       Set the label for a curve plot. Use this option multiple times
-                       for multiple curves. With --dataid, curveID is the ID. Otherwise,
-                       it's the index of the curve, starting at 0
-
-  --autolegend         Use the curve IDs for the legend. Titles given with --legend
-                       override these
-
-  --xlen xxx           When using --stream, sets the size of the x-window to plot.
-                       Omit this or set it to 0 to plot ALL the data. Does not
-                       make sense with 3d plots. Implies --monotonic
-
-  --xmin  xxx          Set the range for the x axis. These are ignored in a
-                       streaming plot
-  --xmax  xxx          Set the range for the x axis. These are ignored in a
-                       streaming plot
-  --ymin  xxx          Set the range for the y axis.
-  --ymax  xxx          Set the range for the y axis.
-  --y2min xxx          Set the range for the y2 axis. Does not apply to 3d plots.
-  --y2max xxx          Set the range for the y2 axis. Does not apply to 3d plots.
-  --zmin  xxx          Set the range for the z axis. Only applies to 3d plots or colormaps.
-  --zmax  xxx          Set the range for the z axis. Only applies to 3d plots or colormaps.
-
-  --y2    xxx          Plot the data specified by this curve ID on the y2 axis.
-                       Without --dataid, the ID is just an ordered 0-based index.
-                       Does not apply to 3d plots.
-
-  --curvestyle curveID style
-                       Additional styles per curve. With --dataid, curveID is the
-                       ID. Otherwise, it's the index of the curve, starting at 0. Use
-                       this option multiple times for multiple curves
-
-  --curvestyleall xxx  Additional styles for ALL curves.
-
-  --extracmds xxx      Additional commands. These could contain extra global styles
-                       for instance
-
-  --size  xxx          Gnuplot size option
-
-  --square             Plot data with aspect ratio 1. For 3D plots, this controls the
-                       aspect ratio for all 3 axes
-
-  --square_xy          For 3D plots, set square aspect ratio for ONLY the x,y axes
-
-  --hardcopy xxx       If not streaming, output to a file specified here. Format
-                       inferred from filename
-
-  --maxcurves xxx      The maximum allowed number of curves. This is 100 by default,
-                       but can be reset with this option. This exists purely to
-                       prevent perl from allocating all of the system's memory when
-                       reading bogus data
-
-  --monotonic          If --domain is given, checks to make sure that the x-
-                       coordinate in the input data is monotonically increasing.
-                       If a given x-variable is in the past, all data currently
-                       cached for this curve is purged. Without --monotonic, all
-                       data is kept. Does not make sense with 3d plots.
-                       No --monotonic by default.
-
-  --extraValuesPerPoint xxx
-                       How many extra values are given for each data point. Normally this
-                       is 0, and does not need to be specified, but sometimes we want
-                       extra data, like for colors or point sizes or error bars, etc.
-                       feedgnuplot options that require this (colormap, circles)
-                       automatically set it. This option is ONLY needed if unknown styles are
-                       used, with --curvestyleall for instance
-
-  --dump               Instead of printing to gnuplot, print to STDOUT. For
-                       debugging.
-
-=head1 ACKNOWLEDGEMENT
-
-This program is originally based on the driveGnuPlots.pl script from
-Thanassis Tsiodras. It is available from his site at
-L<http://users.softlab.ece.ntua.gr/~ttsiod/gnuplotStreaming.html>
-
-=head1 REPOSITORY
-
-L<https://github.com/dkogan/feedgnuplot>
-
-=head1 AUTHOR
-
-Dima Kogan, C<< <dima@secretsauce.net> >>
-
-=head1 LICENSE AND COPYRIGHT
-
-Copyright 2011 Dima Kogan.
-
-This program is free software; you can redistribute it and/or modify it
-under the terms of either: the GNU General Public License as published
-by the Free Software Foundation; or the Artistic License.
-
-See http://dev.perl.org/licenses/ for more information.
-
-=cut

bin/feedgnuplot.pod

@@ -0,0 +1,394 @@
+=head1 NAME
+
+feedgnuplot - Pipe-oriented frontend to Gnuplot
+
+=head1 SYNOPSIS
+
+Simple plotting of stored data:
+
+ $ seq 5 | awk '{print 2*$1, $1*$1}'
+ 2 1
+ 4 4
+ 6 9
+ 8 16
+ 10 25
+
+ $ seq 5 | awk '{print 2*$1, $1*$1}' |
+   feedgnuplot --lines --points --legend 0 "data 0" --title "Test plot" --y2 1
+
+Simple real-time plotting example: plot how much data is received on the wlan0
+network interface in bytes/second (uses bash, awk and Linux):
+
+ $ while true; do sleep 1; cat /proc/net/dev; done |
+   gawk '/wlan0/ {if(b) {print $2-b; fflush()} b=$2}' |
+   feedgnuplot --lines --stream --xlen 10 --ylabel 'Bytes/sec' --xlabel seconds
+
+=head1 DESCRIPTION
+
+This is a flexible, command-line-oriented frontend to Gnuplot. It creates
+plots from data coming in on STDIN or given in a filename passed on the
+commandline. Various data representations are supported, as is hardcopy
+output and streaming display of live data. A simple example:
+
+ $ seq 5 | awk '{print 2*$1, $1*$1}' | feedgnuplot
+
+You should see a plot with two curves. The C<awk> command generates some data to
+plot and the C<feedgnuplot> reads it in from STDIN and generates the plot. The
+C<awk> invocation is just an example; more interesting things would be plotted
+in normal usage. No commandline-options are required for the most basic
+plotting. Input parsing is flexible; every line need not have the same number of
+points. New curves will be created as needed.
+
+The most commonly used functionality of gnuplot is supported directly by the
+script. Anything not directly supported can still be done with the
+C<--extracmds> and C<--curvestyle> options. Arbitrary gnuplot commands can be
+passed in with C<--extracmds>. For example, to turn off the grid, pass in
+C<--extracmds 'unset grid'>. As many of these options as needed can be passed
+in. To add arbitrary curve styles, use C<--curvestyle curveID extrastyle>. Pass
+these more than once to affect more than one curve. To apply an extra style to
+I<all> the curves, pass in C<--curvestyleall extrastyle>.
+
+=head2 Data formats
+
+By default, each value present in the incoming data represents a distinct data
+point, as demonstrated in the original example above (we had 10 numbers in the
+input and 10 points in the plot). If requested, the script supports more
+sophisticated interpretation of input data
+
+=head3 Domain selection
+
+If C<--domain> is passed in, the first value on each line of input is
+interpreted as the I<X>-value for the rest of the data on that line. Without
+C<--domain> the I<X>-value is the line number, and the first value on a line is
+a plain data point like the others. Default is C<--nodomain>. Thus the original
+example above produces 2 curves, with B<1,2,3,4,5> as the I<X>-values. If we run
+the same command with --domain:
+
+ $ seq 5 | awk '{print 2*$1, $1*$1}' | feedgnuplot --domain
+
+we get only 1 curve, with B<2,4,6,8,10> as the I<X>-values. As many points as
+desired can appear on a single line, but all points on a line are associated
+with the I<X>-value at the start of that line.
+
+=head3 Curve indexing
+
+By default, each column represents a separate curve. This is fine unless sparse
+data is to be plotted. With the C<--dataid> option, each point is represented by
+2 values: a string identifying the curve, and the value itself. If we add
+C<--dataid> to the original example:
+
+ $ seq 5 | awk '{print 2*$1, $1*$1}' | feedgnuplot --dataid --autolegend
+
+we get 5 different curves with one point in each. The first column, as produced
+by C<awk>, is B<2,4,6,8,10>. These are interpreted as the IDs of the curves to
+be plotted. The C<--autolegend> option adds a legend using the given IDs to
+label the curves. The IDs need not be numbers; generic strings are accepted. As
+many points as desired can appear on a single line. C<--domain> can be used in
+conjunction with C<--dataid>.
+
+=head3 Multi-value style support
+
+Depending on how gnuplot is plotting the data, more than one value may be needed
+to represent a single point. For example, the script has support to plot all the
+data with C<--circles>. This requires a radius to be specified for each point in
+addition to the position of the point. Thus, when plotting with C<--circles>, 2
+numbers are read for each data point instead of 1. A similar situation exists
+with C<--colormap> where each point contains the position I<and> the
+color. There are other gnuplot styles that require more data (such as error
+bars), but none of these are directly supported by the script. They can still be
+used, though, by specifying the specific style with C<--curvestyle>, and
+specifying how many extra values are needed for each point with
+C<--extraValuesPerPoint extra>. C<--extraValuesPerPoint> is ONLY needed for the
+styles not explicitly supported; supported styles set that variable
+automatically.
+
+=head3 3D data
+
+To plot 3D data, pass in C<--3d>. C<--domain> MUST be given when plotting 3D
+data to avoid domain ambiguity. If 3D data is being plotted, there are by
+definition 2 domain values instead of one (I<Z> as a function of I<X> and I<Y>
+instead of I<Y> as a function of I<X>). Thus the first 2 values on each line are
+interpreted as the domain instead of just 1. The rest of the processing happens
+the same way as before.
+
+=head3 Special data commands
+
+Other than the raw data, 2 special commands are interpreted if they appear in
+the input. These are C<replot> and C<clear>. If a line of data begins with
+C<replot> and we're plotting in realtime with C<--stream>, the plot will be
+refreshed immediately. If a line of data begins with C<clear>, the plot is
+cleared, to be re-filled with any data following the C<clear>.
+
+=head2 Real-time streaming data
+
+To plot real-time data, pass in the C<--stream [refreshperiod]> option. Data
+will then be plotted as it is received. The plot will be updated every
+C<refreshperiod> seconds. If the period isn't specified, a 1Hz refresh rate is
+used. To refresh at specific intervals indicated by the data, set the
+refreshperiod to 0 or to 'trigger'. The plot will then I<only> be refreshed when
+a data line 'replot' is received. This 'replot' command works in both triggered
+and timed modes, but in triggered mode, it's the only way to replot.
+
+To plot only the most recent data (instead of I<all> the data), C<--xlen
+windowsize> can be given. This will create an constantly-updating, scrolling
+view of the recent past. C<windowsize> should be replaced by the desired length
+of the domain window to plot, in domain units (passed-in values if C<--domain>
+or line numbers otherwise).
+
+=head2 Hardcopy output
+
+The script is able to produce hardcopy output with C<--hardcopy outputfile>. The
+output type can be inferred from the filename, if B<.ps>, B<.eps>, B<.pdf>,
+B<.svg> or B<.png> is requested. If any other file type is requested,
+C<--terminal> I<must> be passed in to tell gnuplot how to make the plot.
+
+=head2 Self-plotting data files
+
+This script can be used to enable self-plotting data files. There are 2 ways of
+doing this: with a shebang (#!) or with inline perl data.
+
+=head3 Self-plotting data with a #!
+
+A self-plotting, executable data file C<data> is formatted as
+
+ $ cat data
+ #!/usr/bin/feedgnuplot --lines --points
+ 2 1
+ 4 4
+ 6 9
+ 8 16
+ 10 25
+ 12 36
+ 14 49
+ 16 64
+ 18 81
+ 20 100
+ 22 121
+ 24 144
+ 26 169
+ 28 196
+ 30 225
+
+This is the shebang (#!) line followed by the data, formatted as before. The
+data file can be plotted simply with
+
+ $ ./data
+
+The caveats here are that on Linux the whole #! line is limited to 127 charaters
+and that the full path to feedgnuplot must be given. The 127 character limit is
+a serious limitation, but this can likely be resolved with a kernel patch. I
+have only tried on Linux 2.6.
+
+=head3 Self-plotting data with perl inline data
+
+Perl supports storing data and code in the same file. This can also be used to
+create self-plotting files:
+
+ $ cat plotdata.pl
+ #!/usr/bin/perl
+ use strict;
+ use warnings;
+
+ open PLOT, "| feedgnuplot --lines --points" or die "Couldn't open plotting pipe";
+ while( <DATA> )
+ {
+   my @xy = split;
+   print PLOT "@xy\n";
+ }
+ __DATA__
+ 2 1
+ 4 4
+ 6 9
+ 8 16
+ 10 25
+ 12 36
+ 14 49
+ 16 64
+ 18 81
+ 20 100
+ 22 121
+ 24 144
+ 26 169
+ 28 196
+ 30 225
+
+This is especially useful if the logged data is not in a format directly
+supported by feedgnuplot. Raw data can be stored after the __DATA__ directive,
+with a small perl script to manipulate the data into a useable format and send
+it to the plotter.
+
+=head1 ARGUMENTS
+
+  --[no]domain         If enabled, the first element of each line is the
+                       domain variable.  If not, the point index is used
+
+  --[no]dataid         If enabled, each data point is preceded by the ID
+                       of the data set that point corresponds to. This ID is
+                       interpreted as a string, NOT as just a number. If not
+                       enabled, the order of the point is used.
+
+As an example, if line 3 of the input is "0 9 1 20"
+ '--nodomain --nodataid' would parse the 4 numbers as points in 4
+   different curves at x=3
+
+ '--domain --nodataid' would parse the 4 numbers as points in 3 different
+   curves at x=0. Here, 0 is the x-variable and 9,1,20 are the data values
+
+ '--nodomain --dataid' would parse the 4 numbers as points in 2 different
+   curves at x=3. Here 0 and 1 are the data IDs and 9 and 20 are the
+   data values
+
+ '--domain --dataid' would parse the 4 numbers as a single point at
+   x=0. Here 9 is the data ID and 1 is the data value. 20 is an extra
+   value, so it is ignored. If another value followed 20, we'd get another
+   point in curve ID 20
+
+  --[no]3d             Do [not] plot in 3D. This only makes sense with --domain.
+                       Each domain here is an (x,y) tuple
+
+  --colormap           Show a colormapped xy plot. Requires extra data for the color.
+                       zmin/zmax can be used to set the extents of the colors.
+                       Automatically increments extraValuesPerPoint
+
+  --stream [period]    Plot the data as it comes in, in realtime. If period is given,
+                       replot every period seconds. If no period is given, replot at
+                       1Hz. If the period is given as 0 or 'trigger', replot ONLY when
+                       the incoming data dictates this . See the "Real-time streaming
+                       data" section of the man page.
+
+  --[no]lines          Do [not] draw lines to connect consecutive points
+  --[no]points         Do [not] draw points
+  --circles            Plot with circles. This requires a radius be specified for
+                       each point. Automatically increments extraValuesPerPoint
+
+  --xlabel xxx         Set x-axis label
+  --ylabel xxx         Set y-axis label
+  --y2label xxx        Set y2-axis label. Does not apply to 3d plots
+  --zlabel xxx         Set y-axis label. Only applies to 3d plots
+
+  --title  xxx         Set the title of the plot
+
+  --legend curveID legend
+                       Set the label for a curve plot. Use this option multiple times
+                       for multiple curves. With --dataid, curveID is the ID. Otherwise,
+                       it's the index of the curve, starting at 0
+
+  --autolegend         Use the curve IDs for the legend. Titles given with --legend
+                       override these
+
+  --xlen xxx           When using --stream, sets the size of the x-window to plot.
+                       Omit this or set it to 0 to plot ALL the data. Does not
+                       make sense with 3d plots. Implies --monotonic
+
+  --xmin  xxx          Set the range for the x axis. These are ignored in a
+                       streaming plot
+  --xmax  xxx          Set the range for the x axis. These are ignored in a
+                       streaming plot
+  --ymin  xxx          Set the range for the y axis.
+  --ymax  xxx          Set the range for the y axis.
+  --y2min xxx          Set the range for the y2 axis. Does not apply to 3d plots.
+  --y2max xxx          Set the range for the y2 axis. Does not apply to 3d plots.
+  --zmin  xxx          Set the range for the z axis. Only applies to 3d plots or colormaps.
+  --zmax  xxx          Set the range for the z axis. Only applies to 3d plots or colormaps.
+
+  --y2    xxx          Plot the data specified by this curve ID on the y2 axis.
+                       Without --dataid, the ID is just an ordered 0-based index.
+                       Does not apply to 3d plots. Can be passed multiple times, or passed a
+                       comma-separated list
+
+  --histogram  curveID
+                       Set up a this specific curve to plot a histogram. The bin
+                       width is given with the --binwidth option (assumed 1.0 if
+                       omitted). --histogram does NOT touch the drawing style.
+                       It is often desired to plot these with boxes, and this
+                       MUST be explicitly requested with --curvestyleall 'with
+                       boxes'. This works with --domain and/or --stream, but in
+                       those cases the x-value is used ONLY to cull old data
+                       because of --xlen or --monotonic. I.e. the x-values are
+                       NOT drawn in any way. Can be passed multiple times, or passed a comma-
+                       separated list
+  --binwidth width     The width of bins when making histograms. This setting applies to ALL
+                       histograms in the plot. Defaults to 1.0 if not given.
+  --histstyle style    Normally, histograms are generated with the 'smooth freq'
+                       gnuplot style. --histstyle can be used to select
+                       different 'smooth' settings. Allowed are 'unique',
+                       'cumulative' and 'cnormal'. 'unique' indicates whether a
+                       bin has at least one item in it: instead of counting the
+                       items, it'll always report 0 or 1. 'cumulative' is the
+                       integral of the "normal" histogram. 'cnormal' is like
+                       'cumulative', but rescaled to end up at 1.0.
+
+  --curvestyle curveID style
+                       Additional styles per curve. With --dataid, curveID is the
+                       ID. Otherwise, it's the index of the curve, starting at 0. Use
+                       this option multiple times for multiple curves
+
+  --curvestyleall xxx  Additional styles for ALL curves.
+
+  --extracmds xxx      Additional commands. These could contain extra global styles
+                       for instance. Can be passed multiple times, or passed a comma-
+                       separated list
+
+  --square             Plot data with aspect ratio 1. For 3D plots, this controls the
+                       aspect ratio for all 3 axes
+
+  --square_xy          For 3D plots, set square aspect ratio for ONLY the x,y axes
+
+  --hardcopy xxx       If not streaming, output to a file specified here. Format
+                       inferred from filename, unless specified by --terminal
+  --terminal xxx       String passed to 'set terminal'. No attempts are made to
+                       validate this. --hardcopy sets this to some sensible
+                       defaults if --hardcopy is given .png, .pdf, .ps, .eps or
+                       .svg. If any other file type is desired, use both
+                       --hardcopy and --terminal
+
+  --maxcurves xxx      The maximum allowed number of curves. This is 100 by default,
+                       but can be reset with this option. This exists purely to
+                       prevent perl from allocating all of the system's memory when
+                       reading bogus data
+
+  --monotonic          If --domain is given, checks to make sure that the x-
+                       coordinate in the input data is monotonically increasing.
+                       If a given x-variable is in the past, all data currently
+                       cached for this curve is purged. Without --monotonic, all
+                       data is kept. Does not make sense with 3d plots.
+                       No --monotonic by default.
+
+  --extraValuesPerPoint xxx
+                       How many extra values are given for each data point. Normally this
+                       is 0, and does not need to be specified, but sometimes we want
+                       extra data, like for colors or point sizes or error bars, etc.
+                       feedgnuplot options that require this (colormap, circles)
+                       automatically set it. This option is ONLY needed if unknown styles are
+                       used, with --curvestyleall for instance
+
+  --dump               Instead of printing to gnuplot, print to STDOUT. For
+                       debugging.
+
+  --geometry           If using X11, specifies the size, position of the plot window
+
+=head1 ACKNOWLEDGEMENT
+
+This program is originally based on the driveGnuPlots.pl script from
+Thanassis Tsiodras. It is available from his site at
+L<http://users.softlab.ece.ntua.gr/~ttsiod/gnuplotStreaming.html>
+
+=head1 REPOSITORY
+
+L<https://github.com/dkogan/feedgnuplot>
+
+=head1 AUTHOR
+
+Dima Kogan, C<< <dima@secretsauce.net> >>
+
+=head1 LICENSE AND COPYRIGHT
+
+Copyright 2011-2012 Dima Kogan.
+
+This program is free software; you can redistribute it and/or modify it
+under the terms of either: the GNU General Public License as published
+by the Free Software Foundation; or the Artistic License.
+
+See http://dev.perl.org/licenses/ for more information.
+
+=cut

completions/bash/feedgnuplot

@@ -27,7 +27,6 @@ complete -W                                     \
     --y2                                        \
     --curvestyleall                             \
     --extracmds                                 \
-    --size                                      \
     --square                                    \
     --square_xy                                 \
     --hardcopy                                  \
@@ -35,5 +34,10 @@ complete -W                                     \
     --monotonic                                 \
     --extraValuesPerPoint                       \
     --dump                                      \
+    --geometry                                  \
     --curvestyle                                \
+    --histogram                                 \
+    --binwidth                                  \
+    --histstyle                                 \
+    --terminal                                  \
     --legend' feedgnuplot

completions/zsh/_feedgnuplot

@@ -3,7 +3,7 @@
 _arguments -S                                                                           \
     '()--domain[first element of each line is the domain variable]'                     \
     '--dataid[each data point is preceded by the corresponding ID]'                     \
-    '(--monotonic --xlen)--3d'                                                          \
+    '(--monotonic --xlen --histogram)--3d'                                              \
     '--colormap[show a colormapped xy plot]'                                            \
     '--stream[Plot the data in realtime]::period in s:'                                 \
     '--lines'                                                                           \
@@ -28,7 +28,6 @@ _arguments -S
     '*--y2:plot to place on the Y2 axis:'                                               \
     '--curvestyleall[Additional styles for ALL curves]:'                                \
     '*--extracmds[Additional gnuplot commands]:'                                        \
-    '--size[Gnuplot size option]:'                                                      \
     '--square[Plot data with square aspect ratio]'                                      \
     '--square_xy[For 3D plots, set square aspect ratio for ONLY the x,y axes]'          \
     '--hardcopy[Plot to a file]:'                                                       \
@@ -36,5 +35,10 @@ _arguments -S
     '(--3d)--monotonic[Resets plot if an X in the past is seen]'                        \
     '--extraValuesPerPoint[How many extra values are given for each data point]:'       \
     '--dump[Instead of printing to gnuplot, print to STDOUT]'                           \
+    '--geometry[The X11 geometry string]:geometry string:'                              \
     '*--curvestyle[Additional styles for a curve]:curve id: :style:'                    \
+    '(--3d)*--histogram:plot to treat as a histogram:'                                  \
+    '--binwidth:Histogram bin width:'                                                   \
+    '--histstyle:Style of histogram:(frequency unique cumulative cnormal)'              \
+    '--terminal:Terminal options to set with "set terminal":'                           \
     '*--legend[Legend for a curve]:curve id: :legend:'

debian/changelog

@@ -1,9 +1,52 @@
+feedgnuplot (1.22-2) experimental; urgency=low
+
+  * added Anton Gladky as an Uploader
+  * added doc-base definition
+
+ -- Dima Kogan <dima@secretsauce.net>  Fri, 14 Sep 2012 01:31:34 -0700
+
+feedgnuplot (1.22-1) experimental; urgency=low
+
+  * debianization split from the upstream source
+  * package now uploaded to Debian (Closes: #686413)
+
+ -- Dima Kogan <dima@secretsauce.net>  Tue, 11 Sep 2012 11:32:30 -0700
+
+feedgnuplot (1.22) unstable; urgency=low
+
+  * removed --size option
+
+ -- Dima Kogan <dima@secretsauce.net>  Mon, 03 Sep 2012 08:33:26 -0700
+
+feedgnuplot (1.21) unstable; urgency=low
+
+  * removed the POD from the script to its own file
+  * fixed regression to allow no given extracmds, histogram or y2
+    options
+
+ -- Dima Kogan <dima@secretsauce.net>  Sun, 02 Sep 2012 23:52:21 -0700
+
+feedgnuplot (1.20) unstable; urgency=low
+
+  * no longer hardcoding 'x11' as the default terminal
+  * added histogram support
+  * generic terminals can now be requested
+  * --extracmds, --histogram, --y2 can now take comma-separated lists
+
+ -- Dima Kogan <dima@secretsauce.net>  Fri, 31 Aug 2012 01:35:50 -0700
+
+feedgnuplot (1.19) unstable; urgency=low
+
+  * added --geometry option to specify plot dimensions
+
+ -- Dima Kogan <dima@secretsauce.net>  Sat, 11 Feb 2012 21:04:42 -0800
+
 feedgnuplot (1.18) unstable; urgency=low
 
   * data-ids can now include characters such as -. Any non-whitespace
     works
 
- -- Dima Kogan <dkogan@secretsauce.net>  Tue, 27 Dec 2011 16:47:36 -0800
+ -- Dima Kogan <dima@secretsauce.net>  Tue, 27 Dec 2011 16:47:36 -0800
 
 feedgnuplot (1.17) unstable; urgency=low
 
@@ -14,7 +57,7 @@ feedgnuplot (1.17) unstable; urgency=low
   [ Hermann Schwarting ]
   * add build dependency libtest-script-run-perl
 
- -- Dima Kogan <dkogan@secretsauce.net>  Sun, 20 Nov 2011 19:17:22 -0800
+ -- Dima Kogan <dima@secretsauce.net>  Sun, 20 Nov 2011 19:17:22 -0800
 
 feedgnuplot (1.16) unstable; urgency=low
 

debian/control

@@ -1,17 +1,20 @@
 Source: feedgnuplot
-Section: perl
-Priority: optional
-Build-Depends: debhelper (>= 7), libtest-script-run-perl
-Build-Depends-Indep: perl
-Maintainer: Dima Kogan <dima@secretsauce.net>
-Standards-Version: 3.9.2
+Section: science
+Priority: extra
+Build-Depends: debhelper (>= 7.0.50~), libtest-script-run-perl, perl
+Maintainer: Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org>
+Uploaders: Dima Kogan <dima@secretsauce.net>, Anton Gladky <gladky.anton@gmail.com>
+Standards-Version: 3.9.3
 Homepage: https://github.com/dkogan/feedgnuplot
+Vcs-Git: git://git.debian.org/git/debian-science/packages/feedgnuplot.git
+Vcs-Browser: http://git.debian.org/?p=debian-science/packages/feedgnuplot.git
+DM-Upload-Allowed: yes
 
 Package: feedgnuplot
 Architecture: all
 Depends: ${misc:Depends}, ${perl:Depends}, gnuplot
-Description: A pipe-oriented frontend to Gnuplot
- This is a flexible, command-line-oriented frontend to Gnuplot. It creates
- plots from data coming in on STDIN or given in a filename passed on the
- commandline. Various data representations are supported, as is hardcopy
- output and streaming display of live data.
+Description: Pipe-oriented frontend to Gnuplot
+ Flexible, command-line-oriented frontend to Gnuplot. Creates plots from data
+ coming in on STDIN or given in a filename passed on the commandline. Various
+ data representations are supported, as is hardcopy output and streaming display
+ of live data.

debian/copyright

@@ -1,13 +1,9 @@
-Format-Specification: http://svn.debian.org/wsvn/dep/web/deps/dep5.mdwn?op=file&rev=135
-Maintainer: Dima Kogan, <dima at secretsauce.net>
-Source: http://search.cpan.org/dist/feedGnuplot/
-Name: feedgnuplot
+Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Source: https://github.com/dkogan/feedgnuplot
+Upstream-Contact: Dima Kogan, <dima@secretsauce.net>
+Upstream-Name: feedgnuplot
 
 Files: *
-Copyright: Dima Kogan, <dima at secretsauce.net>
-License: 
-
-Files: debian/*
 Copyright: 2011, Dima Kogan <dima@secretsauce.net>
 License: Artistic or GPL-1+
 

debian/feedgnuplot.doc-base

@@ -0,0 +1,9 @@
+Document: feedgnuplot
+Title: Feedgnuplot Manual
+Author: Dima Kogan
+Abstract: Formatted manpage for feedgnuplot
+Section: Science/Data Analysis
+
+Format: HTML
+Index: /usr/share/doc/feedgnuplot/feedgnuplot.html
+Files: /usr/share/doc/feedgnuplot/feedgnuplot.html

debian/feedgnuplot.docs

@@ -0,0 +1 @@
+feedgnuplot.html

debian/gbp.conf

@@ -1,5 +1,7 @@
 [DEFAULT]
-upstream-tree = branch
-upstream-branch = master
-debian-branch = master
-debian-tag = debian-%(version)s
+debian-branch = debian
+upstream-tree = tag
+debian-tag = debian/%(version)s
+pristine-tar = False
+sign-tags = True
+sign-changelog = True

debian/rules

@@ -2,3 +2,11 @@
 
 %:
 	dh $@
+
+override_dh_auto_build:
+	dh_auto_build
+	pod2html --title=feedgnuplot bin/feedgnuplot.pod > feedgnuplot.html
+
+override_dh_auto_clean:
+	rm -rf feedgnuplot.html pod2htm*
+	dh_auto_clean

debian/source/format

@@ -1 +1 @@
-3.0 (native)
+3.0 (quilt)

debian/watch

@@ -1,2 +1,2 @@
 version = 3
-http://search.cpan.org/dist/feedGnuplot/   .*/feedgnuplot-v?(\d[\d.-]+)\.(?:tar(?:\.gz|\.bz2)?|tgz|zip)$
+https://github.com/dkogan/feedgnuplot/tags .*/tarball/v(\d[\d\.]+)

package_definitions/debian/changelog

@@ -0,0 +1,118 @@
+feedgnuplot (1.23) unstable; urgency=low
+
+  * debian packaging cleanup
+  * package now uploaded to Debian (Closes: #686413)
+
+ -- Dima Kogan <dima@secretsauce.net>  Mon, 10 Sep 2012 20:47:40 -0700
+
+feedgnuplot (1.22) unstable; urgency=low
+
+  * removed --size option
+
+ -- Dima Kogan <dima@secretsauce.net>  Mon, 03 Sep 2012 08:33:26 -0700
+
+feedgnuplot (1.21) unstable; urgency=low
+
+  * removed the POD from the script to its own file
+  * fixed regression to allow no given extracmds, histogram or y2
+    options
+
+ -- Dima Kogan <dima@secretsauce.net>  Sun, 02 Sep 2012 23:52:21 -0700
+
+feedgnuplot (1.20) unstable; urgency=low
+
+  * no longer hardcoding 'x11' as the default terminal
+  * added histogram support
+  * generic terminals can now be requested
+  * --extracmds, --histogram, --y2 can now take comma-separated lists
+
+ -- Dima Kogan <dima@secretsauce.net>  Fri, 31 Aug 2012 01:35:50 -0700
+
+feedgnuplot (1.19) unstable; urgency=low
+
+  * added --geometry option to specify plot dimensions
+
+ -- Dima Kogan <dima@secretsauce.net>  Sat, 11 Feb 2012 21:04:42 -0800
+
+feedgnuplot (1.18) unstable; urgency=low
+
+  * data-ids can now include characters such as -. Any non-whitespace
+    works
+
+ -- Dima Kogan <dima@secretsauce.net>  Tue, 27 Dec 2011 16:47:36 -0800
+
+feedgnuplot (1.17) unstable; urgency=low
+
+  [ Dima Kogan ]
+  * POD: removed -Winteractive, since this was apparently a mawk-ism
+  * added zsh and bash completions to the package
+
+  [ Hermann Schwarting ]
+  * add build dependency libtest-script-run-perl
+
+ -- Dima Kogan <dima@secretsauce.net>  Sun, 20 Nov 2011 19:17:22 -0800
+
+feedgnuplot (1.16) unstable; urgency=low
+
+  * deb version parser now works for any package name
+  * Some POD fixes
+  * now building a native package
+
+ -- Dima Kogan <dima@secretsauce.net>  Fri, 11 Nov 2011 00:10:18 -0800
+
+feedgnuplot (1.15-2) unstable; urgency=low
+
+  * added source format for the debianization
+  * added configuration to let git-buildpackage build this package
+  * standards bump to make lintian happier
+
+ -- Dima Kogan <dima@secretsauce.net>  Sun, 23 Oct 2011 13:38:15 -0700
+
+feedgnuplot (1.15-1) unstable; urgency=low
+
+  * Renamed main script from feedGnuplot to feedgnuplot
+  * Slightly improved packaging, added instructions, etc
+
+ -- Dima Kogan <dima@secretsauce.net>  Sun, 16 Oct 2011 11:58:15 -0700
+
+feedgnuplot (1.14-1) unstable; urgency=low
+
+  * New upstream release (added 'clear' command, documented commands)
+
+ -- Dima Kogan <dima@secretsauce.net>  Sun, 22 May 2011 15:25:28 -0700
+
+feedgnuplot (1.13-1) unstable; urgency=low
+
+  * New upstream release (Better streaming plot control)
+
+ -- Dima Kogan <dima@secretsauce.net>  Tue, 26 Apr 2011 14:24:09 -0700
+
+feedgnuplot (1.12-1) unstable; urgency=low
+
+  * New upstream release
+
+ -- Dima Kogan <dima@secretsauce.net>  Tue, 19 Apr 2011 11:02:23 -0700
+
+feedgnuplot (1.11-1) unstable; urgency=low
+
+  * New upstream release
+
+ -- Dima Kogan <dima@secretsauce.net>  Sat, 09 Apr 2011 14:10:21 -0700
+
+feedgnuplot (1.10-1) unstable; urgency=low
+
+  * New upstream release
+
+ -- Dima Kogan <dima@secretsauce.net>  Sat, 09 Apr 2011 14:08:06 -0700
+
+feedgnuplot (1.09-1) unstable; urgency=low
+
+  * New upstream release
+
+ -- Dima Kogan <dima@secretsauce.net>  Sun, 03 Apr 2011 17:23:38 -0700
+
+feedgnuplot (1.08-1) unstable; urgency=low
+
+  * Initial debianized release.
+
+ -- Dima Kogan <dima@secretsauce.net>  Sun, 6 Feb 2011 15:58:22 -0800

package_definitions/debian/compat

@@ -0,0 +1 @@
+7

package_definitions/debian/control

@@ -0,0 +1,20 @@
+Source: feedgnuplot
+Section: science
+Priority: extra
+Build-Depends: debhelper (>= 7), libtest-script-run-perl, perl
+Maintainer: Dima Kogan <dima@secretsauce.net>
+Uploaders: Dima Kogan <dima@secretsauce.net>
+Standards-Version: 3.9.3
+Homepage: https://github.com/dkogan/feedgnuplot
+Vcs-Git: git://github.com/dkogan/feedgnuplot.git
+Vcs-Browser: https://github.com/dkogan/feedgnuplot
+DM-Upload-Allowed: yes
+
+Package: feedgnuplot
+Architecture: all
+Depends: ${misc:Depends}, ${perl:Depends}, gnuplot
+Description: Pipe-oriented frontend to Gnuplot
+ Flexible, command-line-oriented frontend to Gnuplot. Creates plots from data
+ coming in on STDIN or given in a filename passed on the commandline. Various
+ data representations are supported, as is hardcopy output and streaming display
+ of live data.

package_definitions/debian/copyright

@@ -0,0 +1,24 @@
+Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Source: https://github.com/dkogan/feedgnuplot
+Upstream-Contact: Dima Kogan, <dima@secretsauce.net>
+Upstream-Name: feedgnuplot
+
+Files: *
+Copyright: 2011, Dima Kogan <dima@secretsauce.net>
+License: Artistic or GPL-1+
+
+License: Artistic
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the Artistic License, which comes with Perl.
+ .
+ On Debian GNU/Linux systems, the complete text of the Artistic License
+ can be found in `/usr/share/common-licenses/Artistic'.
+
+License: GPL-1+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 1, or (at your option)
+ any later version.
+ .
+ On Debian GNU/Linux systems, the complete text of version 1 of the
+ General Public License can be found in `/usr/share/common-licenses/GPL-1'.

package_definitions/debian/feedgnuplot.install

@@ -0,0 +1,2 @@
+completions/bash/feedgnuplot /etc/bash_completion.d/
+completions/zsh/_feedgnuplot /usr/share/zsh/vendor-completions

package_definitions/debian/gbp.conf

@@ -0,0 +1,5 @@
+[DEFAULT]
+upstream-tree = branch
+upstream-branch = master
+debian-branch = master
+debian-tag = debian-%(version)s

package_definitions/debian/rules

@@ -0,0 +1,4 @@
+#!/usr/bin/make -f
+
+%:
+	dh $@

package_definitions/debian/source/format

@@ -0,0 +1 @@
+3.0 (native)