Small packaging tweaks:

These were suggested by paultag@debian.org

1. debian/changelog just has the one entry, to indicate what has changed from
the perspective of a user of this package. The old changes in that file have
never been uploaded to Debian

2. Uploading to unstable instead of experimental

3. Bumped up debhelper compat to 9

4. Removed DM-Upload-Allowed

5. Minor standards bump

Changes

@@ -1,3 +1,11 @@
+feedgnuplot (1.23)
+
+  * --extracmds no longer accepts comma-separated lists
+    This was needed because a command can have a comma
+  * --curvestyle no longer adds on top of --curvestyleall
+
+ -- Dima Kogan <dima@secretsauce.net>  Sat, 29 Sep 2012 16:29:38 -0700
+
 feedgnuplot (1.22)
 
   * removed --size option

bin/feedgnuplot

@@ -95,8 +95,9 @@ sub interpretCommandline
 
   # Previously I was using 'legend=s%' and 'curvestyle=s%' for curve addressing. This had cleaner
   # syntax, but disregarded the order of the given options. This resulted in arbitrarily ordered
-  # curves.
-  # needed for these to be parsed into a ref to a list
+  # curves. I thus make parse these into lists, and then also make hashes, for later use
+
+  # needed for these to be parsed into an array-ref
   $options{legend}     = [];
   $options{curvestyle} = [];
   $options{histogram}  = [];
@@ -118,12 +119,27 @@ sub interpretCommandline
   $options->{curvestyleall} = '' unless defined $options->{curvestyleall};
 
   # expand options that are given as comma-separated lists
-  for my $listkey (qw(extracmds histogram y2))
+  for my $listkey (qw(histogram y2))
   {
     @{$options{$listkey}} = map split('\s*,\s*', $_), @{$options{$listkey}}
       if defined $options{$listkey};
   }
 
+  # --legend and --curvestyle options are conceptually hashes, but are parsed as
+  # arrays in order to preserve the ordering. I parse both of these into hashes
+  # because those are useful to have later. After this I can access individual
+  # legends with $options{legend_hash}{curveid}
+  for my $listkey (qw(legend curvestyle))
+  {
+    $options{"${listkey}_hash"} = {};
+
+    my $n = scalar @{$options{$listkey}}/2;
+    foreach my $idx (0..$n-1)
+    {
+      $options{"${listkey}_hash"}{$options{$listkey}[$idx*2]} = $options{$listkey}[$idx*2 + 1];
+    }
+  }
+
   # parse stream option. Allowed only numbers >= 0 or 'trigger'
   if(defined $options->{stream})
   {
@@ -376,7 +392,10 @@ sub mainThread
 # For the specified values, set the legend entries to 'title "blah blah"'
     if(@{$options{legend}})
     {
-      # @{$options{legend}} is a list where consecutive pairs are (curveID, legend)
+      # @{$options{legend}} is a list where consecutive pairs are (curveID,
+      # legend). I use $options{legend} here instead of $options{legend_hash}
+      # because I create a new curve when I see a new one, and the hash is
+      # unordered, thus messing up the ordering
       my $n = scalar @{$options{legend}}/2;
       foreach my $idx (0..$n-1)
       {
@@ -388,7 +407,10 @@ sub mainThread
 # add the extra curve options
     if(@{$options{curvestyle}})
     {
-      # @{$options{curvestyle}} is a list where consecutive pairs are (curveID, style)
+      # @{$options{curvestyle}} is a list where consecutive pairs are (curveID,
+      # style). I use $options{curvestyle} here instead of
+      # $options{curvestyle_hash} because I create a new curve when I see a new
+      # one, and the hash is unordered, thus messing up the ordering
       my $n = scalar @{$options{curvestyle}}/2;
       foreach my $idx (0..$n-1)
       {
@@ -598,10 +620,14 @@ sub updateCurveOptions
   { $title = $id; }
 
   my $titleoption = defined $title ? "title \"$title\"" : "notitle";
-  my $extraoption = defined $options{curvestyleall} ? $options{curvestyleall} : '';
+
+  my $curvestyleall = '';
+  $curvestyleall = $options{curvestyleall}
+    if defined $options{curvestyleall} && !defined $options{curvestyle_hash}{$id};
+
   my $histoptions = $curveoptions->{histoptions} || '';
 
-  $curveoptions->{options} = "$histoptions $titleoption $curveoptions->{extraoptions} $extraoption";
+  $curveoptions->{options} = "$histoptions $titleoption $curveoptions->{extraoptions} $curvestyleall";
 }
 
 sub getCurve

bin/feedgnuplot.pod

@@ -46,7 +46,8 @@ passed in with C<--extracmds>. For example, to turn off the grid, pass in
 C<--extracmds 'unset grid'>. As many of these options as needed can be passed
 in. To add arbitrary curve styles, use C<--curvestyle curveID extrastyle>. Pass
 these more than once to affect more than one curve. To apply an extra style to
-I<all> the curves, pass in C<--curvestyleall extrastyle>.
+I<all> the curves that lack an explicit C<--curvestyle>, pass in
+C<--curvestyleall extrastyle>.
 
 =head2 Data formats
 
@@ -319,15 +320,16 @@ As an example, if line 3 of the input is "0 9 1 20"
                        'cumulative', but rescaled to end up at 1.0.
 
   --curvestyle curveID style
-                       Additional styles per curve. With --dataid, curveID is the
-                       ID. Otherwise, it's the index of the curve, starting at 0. Use
-                       this option multiple times for multiple curves
+                       Additional styles per curve. With --dataid, curveID is
+                       the ID. Otherwise, it's the index of the curve, starting
+                       at 0. Use this option multiple times for multiple curves.
+                       --curvestylall does NOT apply to curves that have a
+                       --curvestyle
 
-  --curvestyleall xxx  Additional styles for ALL curves.
+  --curvestyleall xxx  Additional styles for all curves that have no --curvestyle
 
   --extracmds xxx      Additional commands. These could contain extra global styles
-                       for instance. Can be passed multiple times, or passed a comma-
-                       separated list
+                       for instance. Can be passed multiple times.
 
   --square             Plot data with aspect ratio 1. For 3D plots, this controls the
                        aspect ratio for all 3 axes

debian/changelog

@@ -0,0 +1,5 @@
+feedgnuplot (1.23-2) unstable; urgency=low
+
+  * Initial Debian release (Closes: #686413)
+
+ -- Dima Kogan <dima@secretsauce.net>  Tue, 30 Oct 2012 11:14:01 -0700

debian/compat

@@ -0,0 +1 @@
+9

debian/control

@@ -0,0 +1,19 @@
+Source: feedgnuplot
+Section: science
+Priority: extra
+Build-Depends: debhelper (>= 9), libtest-script-run-perl, perl
+Maintainer: Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org>
+Uploaders: Dima Kogan <dima@secretsauce.net>, Anton Gladky <gladky.anton@gmail.com>
+Standards-Version: 3.9.4
+Homepage: https://github.com/dkogan/feedgnuplot
+Vcs-Git: git://git.debian.org/git/debian-science/packages/feedgnuplot.git
+Vcs-Browser: http://git.debian.org/?p=debian-science/packages/feedgnuplot.git
+
+Package: feedgnuplot
+Architecture: all
+Depends: ${misc:Depends}, ${perl:Depends}, gnuplot
+Description: Pipe-oriented frontend to Gnuplot
+ Flexible, command-line-oriented frontend to Gnuplot. Creates plots from data
+ coming in on STDIN or given in a filename passed on the commandline. Various
+ data representations are supported, as is hardcopy output and streaming display
+ of live data.

debian/copyright

@@ -0,0 +1,24 @@
+Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Source: https://github.com/dkogan/feedgnuplot
+Upstream-Contact: Dima Kogan, <dima@secretsauce.net>
+Upstream-Name: feedgnuplot
+
+Files: *
+Copyright: 2011, Dima Kogan <dima@secretsauce.net>
+License: Artistic or GPL-1+
+
+License: Artistic
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the Artistic License, which comes with Perl.
+ .
+ On Debian GNU/Linux systems, the complete text of the Artistic License
+ can be found in `/usr/share/common-licenses/Artistic'.
+
+License: GPL-1+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 1, or (at your option)
+ any later version.
+ .
+ On Debian GNU/Linux systems, the complete text of version 1 of the
+ General Public License can be found in `/usr/share/common-licenses/GPL-1'.

debian/feedgnuplot.doc-base

@@ -0,0 +1,9 @@
+Document: feedgnuplot
+Title: Feedgnuplot Manual
+Author: Dima Kogan
+Abstract: Formatted manpage for feedgnuplot
+Section: Science/Data Analysis
+
+Format: HTML
+Index: /usr/share/doc/feedgnuplot/feedgnuplot.html
+Files: /usr/share/doc/feedgnuplot/feedgnuplot.html

debian/feedgnuplot.docs

@@ -0,0 +1 @@
+feedgnuplot.html

debian/feedgnuplot.install

@@ -0,0 +1,2 @@
+completions/bash/feedgnuplot /etc/bash_completion.d/
+completions/zsh/_feedgnuplot /usr/share/zsh/vendor-completions

debian/gbp.conf

@@ -0,0 +1,8 @@
+[DEFAULT]
+debian-branch = debian
+upstream-tree = tag
+debian-tag = debian/%(version)s
+upstream-tag = v%(version)s
+pristine-tar = False
+sign-tags = True
+sign-changelog = True

debian/rules

@@ -0,0 +1,12 @@
+#!/usr/bin/make -f
+
+%:
+	dh $@
+
+override_dh_auto_build:
+	dh_auto_build
+	pod2html --title=feedgnuplot bin/feedgnuplot.pod > feedgnuplot.html
+
+override_dh_auto_clean:
+	rm -rf feedgnuplot.html pod2htm*
+	dh_auto_clean

debian/source/format

@@ -0,0 +1 @@
+3.0 (quilt)

debian/watch

@@ -0,0 +1,2 @@
+version = 3
+https://github.com/dkogan/feedgnuplot/tags .*/tarball/v(\d[\d\.]+)

package_definitions/debian/changelog

@@ -1,10 +1,3 @@
-feedgnuplot (1.23) unstable; urgency=low
-
-  * debian packaging cleanup
-  * package now uploaded to Debian (Closes: #686413)
-
- -- Dima Kogan <dima@secretsauce.net>  Mon, 10 Sep 2012 20:47:40 -0700
-
 feedgnuplot (1.22) unstable; urgency=low
 
   * removed --size option