changelog bump

with --persist enabled even something basic like

 seq 5 | feedgnuplot --terminal dumb

does not work. feedgnuplot simply sits there doing nothing. This is likely a
gnuplot bug. Those boards run an older gnuplot build, and I can't easily install
a new one to test. It's possible the newer gnuplots fix this, but it's easier to
release a new feedgnuplot instead

Changes

@@ -1,3 +1,44 @@
+feedgnuplot (1.34)
+
+  * Fix for "Use of implicit split to @_ is deprecated". Thanks to Corey
+    Putkunz
+
+  * Declaring feedgnuplot as a package to let MetaCPAN index this
+    distribution
+
+ -- Dima Kogan <dima@secretsauce.net>  Wed, 14 May 2014 00:45:24 -0700
+
+feedgnuplot (1.33)
+
+  * fixed incorrect plotting of --timefmt --rangesize plots
+
+ -- Dima Kogan <dima@secretsauce.net>  Thu, 06 Feb 2014 23:17:21 -0800
+
+feedgnuplot (1.32)
+
+  * Added --rangesize and --rangesizeall. Different curves can now plot
+    different-size tuples
+
+ -- Dima Kogan <dima@secretsauce.net>  Wed, 05 Feb 2014 13:57:58 -0800
+
+feedgnuplot (1.31)
+
+  * Test suite requires gawk to get strftime()
+
+ -- Dima Kogan <dima@secretsauce.net>  Sat, 25 Jan 2014 20:49:38 -0800
+
+feedgnuplot (1.30)
+
+  * Added --with, --set, --unset, --style, --styleall
+
+ -- Dima Kogan <dima@secretsauce.net>  Fri, 24 Jan 2014 15:38:07 -0800
+
+feedgnuplot (1.29)
+
+  * added CPAN meta-data to require IPC::Run at build time
+
+ -- Dima Kogan <dima@secretsauce.net>  Wed, 04 Dec 2013 21:12:40 -0800
+
 feedgnuplot (1.28)
 
   * Minor POD update

Makefile.PL

@@ -63,7 +63,8 @@ WriteMakefile
     : ()),
    PL_FILES                   => {},
    EXE_FILES                  => [ 'bin/feedgnuplot' ],
-   BUILD_REQUIRES             => { 'String::ShellQuote' => 0},
+   BUILD_REQUIRES             => { 'String::ShellQuote' => 0,
+                                   'IPC::Run'           => 0},
    dist                       => { COMPRESS => 'gzip -9f', SUFFIX => 'gz', },
    clean                      => { FILES => 'feedgnuplot-*' },
   );

bin/feedgnuplot

@@ -1,4 +1,7 @@
 #!/usr/bin/perl
+
+package feedgnuplot; # for the metacpan indexer
+
 use strict;
 use warnings;
 use Getopt::Long;
@@ -13,7 +16,7 @@ use Thread::Queue;
 use Pod::Usage;
 use Time::Piece;
 
-my $VERSION = 1.28;
+my $VERSION = 1.34;
 
 my %options;
 interpretCommandline();
@@ -72,6 +75,7 @@ if($options{stream})
   }
 
   $streamingFinished = 1;
+  $dataQueue->enqueue(undef);
 
   $plotThr->join() if defined $plotThr;
   $addThr->join();
@@ -107,18 +111,32 @@ sub interpretCommandline
   # syntax, but disregarded the order of the given options. This resulted in arbitrarily ordered
   # curves. I thus make parse these into lists, and then also make hashes, for later use
 
-  # needed for these to be parsed into an array-ref
+  # needed for these to be parsed into an array-ref, these default to []
   $options{legend}     = [];
   $options{curvestyle} = [];
+  $options{style}      = [];
   $options{histogram}  = [];
+  $options{y2}         = [];
+  $options{extracmds}  = [];
+  $options{set}        = [];
+  $options{unset}      = [];
+
+  $options{curvestyleall} = '';
+  $options{styleall}      = '';
+  $options{with}          = '';
+
+  $options{rangesize} = [];
+
   GetOptions(\%options, 'stream:s', 'domain!', 'dataid!', '3d!', 'colormap!', 'lines!', 'points!',
              'circles', 'legend=s{2}', 'autolegend!', 'xlabel=s', 'ylabel=s', 'y2label=s', 'zlabel=s',
              'title=s', 'xlen=f', 'ymin=f', 'ymax=f', 'xmin=s', 'xmax=s', 'y2min=f', 'y2max=f',
-             'zmin=f', 'zmax=f', 'y2=s@', 'curvestyle=s{2}', 'curvestyleall=s', 'extracmds=s@',
+             'zmin=f', 'zmax=f', 'y2=s@',
+             'style=s{2}', 'curvestyle=s{2}', 'curvestyleall=s', 'styleall=s', 'with=s', 'extracmds=s@', 'set=s@', 'unset=s@',
              'square!', 'square_xy!', 'hardcopy=s', 'maxcurves=i', 'monotonic!', 'timefmt=s',
              'histogram=s@', 'binwidth=f', 'histstyle=s',
              'terminal=s',
-             'extraValuesPerPoint=i', 'help', 'dump', 'exit', 'version',
+             'rangesize=s{2}', 'rangesizeall=i', 'extraValuesPerPoint=i',
+             'help', 'dump', 'exit', 'version',
              'geometry=s') or pod2usage( -exitval => 1,
                                          -verbose => 1, # synopsis and args
                                          -output  => \*STDERR );
@@ -138,9 +156,6 @@ sub interpretCommandline
     exit 0;
   }
 
-  # no global style if one isn't given
-  $options{curvestyleall} = '' unless defined $options{curvestyleall};
-
   # expand options that are given as comma-separated lists
   for my $listkey (qw(histogram y2))
   {
@@ -148,11 +163,27 @@ sub interpretCommandline
       if defined $options{$listkey};
   }
 
+  # --style and --curvestyle are synonyms, as are --styleall and
+  # --curvestyleall, so fill that in
+  if( $options{styleall} )
+  {
+    if($options{curvestyleall} )
+    {
+      $options{curvestyleall} .= " $options{styleall}";
+    }
+    else
+    {
+      $options{curvestyleall} = $options{styleall};
+    }
+  }
+  push @{$options{curvestyle}}, @{$options{style}};
+
+
   # --legend and --curvestyle options are conceptually hashes, but are parsed as
   # arrays in order to preserve the ordering. I parse both of these into hashes
   # because those are useful to have later. After this I can access individual
   # legends with $options{legend_hash}{curveid}
-  for my $listkey (qw(legend curvestyle))
+  for my $listkey (qw(legend curvestyle rangesize))
   {
     $options{"${listkey}_hash"} = {};
 
@@ -169,6 +200,29 @@ sub interpretCommandline
     exit -1;
   }
 
+  if ( defined $options{rangesizeall} && defined $options{extraValuesPerPoint} )
+  {
+    print STDERR "Only one of --rangesizeall and --extraValuesPerPoint may be given\n";
+    exit -1;
+  }
+
+
+  # I now set up the rangesize to always be
+  #  $options{rangesize_hash}{$id} // $options{rangesize_default}
+  if ( $options{rangesizeall} )
+  {
+      $options{rangesize_default} = $options{rangesizeall};
+  }
+  else
+  {
+      $options{rangesize_default} = 1;
+
+      $options{rangesize_default} += $options{extraValuesPerPoint} if ($options{extraValuesPerPoint});
+      $options{rangesize_default}++                                if ($options{colormap});
+      $options{rangesize_default}++                                if ($options{circles} );
+  }
+
+
   # parse stream option. Allowed only numbers >= 0 or 'trigger'. After this code
   # $options{stream} is
   #  -1 for triggered replotting
@@ -203,6 +257,17 @@ sub interpretCommandline
     }
   }
 
+  if( $options{curvestyleall} && $options{with} )
+  {
+    print STDERR "--curvestyleall and --with are mutually exclusive. Please just use one.\n";
+    exit -1;
+  }
+  if( $options{with} )
+  {
+    $options{curvestyleall} = "with $options{with}";
+    $options{with} = '';
+  }
+
   if ($options{colormap})
   {
     # colormap styles all curves with palette. Seems like there should be a way to do this with a
@@ -224,7 +289,7 @@ sub interpretCommandline
       exit -1;
     }
 
-    if ( defined $options{y2min} || defined $options{y2max} || defined $options{y2} )
+    if ( defined $options{y2min} || defined $options{y2max} || @{$options{y2}} )
     {
       print STDERR "--3d does not make sense with --y2...\n";
       exit -1;
@@ -310,10 +375,8 @@ sub interpretCommandline
     $options{timefmt} =~ s/^\s*//;
     $options{timefmt} =~ s/\s*$//;
 
-    my $Nfields = scalar split( ' ', $options{timefmt});
+    my $Nfields = () = split /\s+/, $options{timefmt}, -1;
     $options{timefmt_Ncols} = $Nfields;
-    my $regex_str = join( '\s+', ('\S+') x $Nfields );
-    $options{timefmt_regex} = qr/$regex_str/;
 
     # make sure --xlen is an integer. With a timefmt xlen goes through strptime
     # and strftime, and those are integer-only
@@ -351,8 +414,6 @@ sub plotUpdateThread
     # indicate that the timer was the replot source
     $dataQueue->enqueue('replot timertick');
   }
-
-  $dataQueue->enqueue(undef);
 }
 
 sub sendRangeCommand
@@ -392,18 +453,7 @@ sub makeDomainNumeric
 
 sub mainThread
 {
-    my $valuesPerPoint = 1;
-    if($options{extraValuesPerPoint}) { $valuesPerPoint += $options{extraValuesPerPoint}; }
-    if($options{colormap})            { $valuesPerPoint++; }
-    if($options{circles} )            { $valuesPerPoint++; }
-
     local *PIPE;
-    my $dopersist = '';
-
-    if( !$options{stream} && getGnuplotVersion() >= 4.3)
-    {
-      $dopersist = '--persist';
-    }
 
     if(exists $options{dump})
     {
@@ -413,7 +463,7 @@ sub mainThread
     {
       my $geometry = defined $options{geometry} ?
         "-geometry $options{geometry}" : '';
-      open PIPE, "|gnuplot $geometry $dopersist" or die "Can't initialize gnuplot\n";
+      open PIPE, "|gnuplot $geometry" or die "Can't initialize gnuplot\n";
     }
     autoflush PIPE 1;
 
@@ -486,7 +536,7 @@ sub mainThread
     }
 
 # For the specified values, set the legend entries to 'title "blah blah"'
-    if(defined $options{legend} && @{$options{legend}})
+    if(@{$options{legend}})
     {
       # @{$options{legend}} is a list where consecutive pairs are (curveID,
       # legend). I use $options{legend} here instead of $options{legend_hash}
@@ -501,7 +551,7 @@ sub mainThread
     }
 
 # add the extra curve options
-    if(defined $options{curvestyle} && @{$options{curvestyle}})
+    if(@{$options{curvestyle}})
     {
       # @{$options{curvestyle}} is a list where consecutive pairs are (curveID,
       # style). I use $options{curvestyle} here instead of
@@ -516,13 +566,7 @@ sub mainThread
     }
 
 # For the values requested to be printed on the y2 axis, set that
-    if( defined $options{y2} )
-    {
-      foreach (@{$options{y2}})
-      {
-        addCurveOption($_, 'axes x1y2');
-      }
-    }
+    addCurveOption($_, 'axes x1y2') foreach (@{$options{y2}});
 
 # timefmt
     if( $options{timefmt} )
@@ -532,43 +576,24 @@ sub mainThread
     }
 
 # add the extra global options
-    if(defined $options{extracmds})
-    {
-      foreach (@{$options{extracmds}})
-      {
-        print(PIPE "$_\n");
-      }
-    }
+    print(PIPE "$_\n")       foreach (@{$options{extracmds}});
+    print(PIPE "set $_\n")   foreach (@{$options{set}});
+    print(PIPE "unset $_\n") foreach (@{$options{unset}});
 
 # set up histograms
-    if( defined $options{histogram} )
-    {
-      $options{binwidth} ||= 1; # if no binwidth given, set it to 1
-      print PIPE
-        "set boxwidth $options{binwidth}\n" .
-        "histbin(x) = $options{binwidth} * floor(0.5 + x/$options{binwidth})\n";
-      foreach (@{$options{histogram}})
-      {
-        setCurveAsHistogram( $_ );
-      }
-    }
+    $options{binwidth} ||= 1;   # if no binwidth given, set it to 1
+    print PIPE
+      "set boxwidth $options{binwidth}\n" .
+      "histbin(x) = $options{binwidth} * floor(0.5 + x/$options{binwidth})\n";
 
-    # regexp for a possibly floating point, possibly scientific notation number
-    my $numRE   = '-?\d*\.?\d+(?:[Ee][-+]?\d+)?';
-    my $domainRE = $options{timefmt_regex} || $numRE;
-
-
-    # a point may be preceded by an id
-    my $pointRE = $options{dataid} ? '(\S+)\s+' : '()';
-    $pointRE .= '(' . join('\s+', ($numRE) x $valuesPerPoint) . ')';
-    $pointRE = qr/$pointRE/;
+    setCurveAsHistogram( $_ ) foreach (@{$options{histogram}});
 
 # set all the axis ranges
     # If a bound isn't given I want to set it to the empty string, so I can communicate it simply to
     # gnuplot
     print PIPE "set xtics\n";
 
-    if($options{y2})
+    if(@{$options{y2}})
     {
       print PIPE "set ytics nomirror\n";
       print PIPE "set y2tics\n";
@@ -631,18 +656,37 @@ sub mainThread
         # line is used)
         # 3d plots require $options{domain}, and dictate "x y" for the domain instead of just "x"
 
+        my @fields = split;
+
         if($options{domain})
         {
-          /($domainRE)/go or next;
-          $domain[0] = $1;
-          $domain0_numeric = makeDomainNumeric( $domain[0] );
-
-          if($options{'3d'})
+          if( $options{timefmt} )
           {
-            /($numRE)/go or next;
-            $domain[1] = $1;
+              # no point if doing anything unless I have at least the domain and
+              # 1 piece of data
+              next if @fields < $options{timefmt_Ncols}+1;
+
+              $domain[0] = join (' ', splice( @fields, 0, $options{timefmt_Ncols}) );
+              $domain0_numeric = makeDomainNumeric( $domain[0] );
           }
-          elsif( $options{monotonic} )
+          elsif(!$options{'3d'})
+          {
+              # no point if doing anything unless I have at least the domain and
+              # 1 piece of data
+              next if @fields < 1+1;
+
+              $domain[0] = $domain0_numeric = shift @fields;
+          }
+          else
+          {
+              # no point if doing anything unless I have at least the domain and
+              # 1 piece of data
+              next if @fields < 2+1;
+
+              @domain = splice(@fields, 0, 2);
+          }
+
+          if( $options{monotonic} )
           {
             if( defined $latestX && $domain0_numeric < $latestX )
             {
@@ -656,7 +700,6 @@ sub mainThread
             else
             { $latestX = $domain0_numeric; }
           }
-
         }
         else
         {
@@ -664,8 +707,7 @@ sub mainThread
           # $. on the data queue in that case
           if(defined $dataQueue)
           {
-            s/ ([\d]+)$//o;
-            $domain[0] = $1;
+            $domain[0] = pop @fields;
           }
           else
           {
@@ -675,13 +717,30 @@ sub mainThread
         }
 
         my $id = -1;
-        while (/$pointRE/go)
-        {
-          if($1 ne '') {$id = $1;}
-          else         {$id++;   }
 
-          pushPoint(getCurve($id),
-                    "@domain $2\n", $domain0_numeric);
+        while(@fields)
+        {
+            if($options{dataid})
+            {
+                $id = shift @fields;
+            }
+            else
+            {
+                $id++;
+            }
+
+            # I'd like to use //, but I guess some people are still on perl 5.8
+            my $rangesize = exists $options{rangesize_hash}{$id} ?
+              $options{rangesize_hash}{$id} :
+              $options{rangesize_default};
+
+            last if @fields < $rangesize;
+
+            pushPoint(getCurve($id),
+                      join(' ',
+                           @domain,
+                           splice( @fields, 0, $rangesize ) ) . "\n",
+                      $domain0_numeric);
         }
       }
     }
@@ -702,7 +761,7 @@ sub mainThread
       # sleep until the plot file exists, and it is closed. Sometimes the output
       # is still being written at this point. If the output filename starts with
       # '|', gnuplot pipes the output to that process, instead of writing to a
-      # file. In that case I don't make sure the file exists, since there IS not
+      # file. In that case I don't make sure the file exists, since there IS no
       # file
       if( $options{hardcopy} !~ /^\|/ )
       {
@@ -787,16 +846,36 @@ sub updateCurveOptions
 
   my $titleoption = defined $title ? "title \"$title\"" : "notitle";
 
-  my $curvestyleall = '';
-  $curvestyleall = $options{curvestyleall}
-    if defined $options{curvestyleall} && !defined $options{curvestyle_hash}{$id};
+  my ($curvestyleall);
+  if( defined $options{curvestyle_hash}{$id} )
+  {
+    # I have a curve-specific style set with --curvestyle. This style lives in
+    # $curve->{extraoptions}, and it overrides the global styles
+    $curvestyleall = '';
+  }
+  else
+  {
+    $curvestyleall = $options{curvestyleall};
+  }
 
   my $histoptions = $curve->{histoptions} || '';
 
   my $usingoptions = '';
   if( $options{timefmt} )
   {
-    $usingoptions = "using 1:" . ($options{timefmt_Ncols}+1);
+      # with --timefmt I need an explicit 'using' specification. I specify the
+      # columns as 1:2:3..... I need the right number of columns (this is given
+      # as 1 + rangesize). I also need to start the range at the first column
+      # past the timefmt
+
+      # I'd like to use //, but I guess some people are still on perl 5.8
+      my $rangesize = exists $options{rangesize_hash}{$id} ?
+        $options{rangesize_hash}{$id} :
+        $options{rangesize_default};
+
+      my @rest = map {$_ + $options{timefmt_Ncols}} (1..$rangesize);
+
+      $usingoptions = "using 1:" . join(':', @rest);
   }
 
   $curve->{options} = "$histoptions $usingoptions $titleoption $curve->{extraoptions} $curvestyleall";
@@ -1027,14 +1106,21 @@ plotting. Input parsing is flexible; every line need not have the same number of
 points. New curves will be created as needed.
 
 The most commonly used functionality of gnuplot is supported directly by the
-script. Anything not directly supported can still be done with the
-C<--extracmds> and C<--curvestyle> options. Arbitrary gnuplot commands can be
-passed in with C<--extracmds>. For example, to turn off the grid, pass in
-C<--extracmds 'unset grid'>. As many of these options as needed can be passed
-in. To add arbitrary curve styles, use C<--curvestyle curveID extrastyle>. Pass
-these more than once to affect more than one curve. To apply an extra style to
-I<all> the curves that lack an explicit C<--curvestyle>, pass in
-C<--curvestyleall extrastyle>.
+script. Anything not directly supported can still be done with options such as
+C<--set>, C<--extracmds> C<--style>, etc. Arbitrary gnuplot commands can be
+passed in with C<--extracmds>. For example, to turn off the grid, you can pass
+in C<--extracmds 'unset grid'>. Commands C<--set> and C<--unset> exists to
+provide nicer syntax, so this is equivalent to passing C<--unset grid>. As many
+of these options as needed can be passed in. To add arbitrary curve styles, use
+C<--style curveID extrastyle>. Pass these more than once to affect more than one
+curve.
+
+To apply an extra style to I<all> the curves that lack an explicit C<--style>,
+pass in C<--styleall extrastyle>. In the most common case, the extra style is
+C<with something>. To support this more simply, you can pass in C<--with
+something> instead of C<--styleall 'with something'>. C<--styleall> and
+C<--with> are mutually exclusive. Furthermore any curve-specific C<--style>
+overrides the global C<--styleall> or C<--with> setting.
 
 =head2 Data formats
 
@@ -1050,7 +1136,7 @@ interpreted as the I<X>-value for the rest of the data on that line. Without
 C<--domain> the I<X>-value is the line number, and the first value on a line is
 a plain data point like the others. Default is C<--nodomain>. Thus the original
 example above produces 2 curves, with B<1,2,3,4,5> as the I<X>-values. If we run
-the same command with --domain:
+the same command with C<--domain>:
 
  $ seq 5 | awk '{print 2*$1, $1*$1}' | feedgnuplot --domain
 
@@ -1077,18 +1163,24 @@ conjunction with C<--dataid>.
 =head3 Multi-value style support
 
 Depending on how gnuplot is plotting the data, more than one value may be needed
-to represent a single point. For example, the script has support to plot all the
-data with C<--circles>. This requires a radius to be specified for each point in
-addition to the position of the point. Thus, when plotting with C<--circles>, 2
-numbers are read for each data point instead of 1. A similar situation exists
-with C<--colormap> where each point contains the position I<and> the
-color. There are other gnuplot styles that require more data (such as error
-bars), but none of these are directly supported by the script. They can still be
-used, though, by specifying the specific style with C<--curvestyle>, and
-specifying how many extra values are needed for each point with
-C<--extraValuesPerPoint extra>. C<--extraValuesPerPoint> is ONLY needed for the
-styles not explicitly supported; supported styles set that variable
-automatically.
+to represent the range of a single point. Basic 2D plots have 2 numbers
+representing each point: 1 domain and 1 range. But if plotting with
+C<--circles>, for instance, then there's an extra range value: the radius. A
+similar situation exists with C<--colormap> where each point contains the
+position I<and> the color. There are other gnuplot styles that require more data
+(such as error bars), but none of these are directly supported by the script.
+They can still be used, however, by specifying the specific style with
+C<--style>, and specifying how many values are needed for each point with
+C<--rangesizeall> or C<--rangesize> or C<--extraValuesPerPoint>. Those options
+that specify the range size are required I<only> for styles not explicitly
+supported by feedgnuplot; supported styles do the right thing automatically.
+
+More examples: if making a 2d plot of y error bars where gnuplot expects a
+(x,y,ydelta) tuple for each point, you want C<--rangesizeall 2> because you have
+one domain value (x) and 2 range values (y,ydelta). Gnuplot can also plot
+lopsided y errorbars by giving a tuple (x,y,ylow,yhigh). This is similar as
+before, but you want C<--rangesizeall 3> instead.
+
 
 =head3 3D data
 
@@ -1123,7 +1215,7 @@ C<--xmin> and C<--xmax> I<must> use the format passed in to C<--timefmt>
 
 Using this option changes both the way the input is parsed I<and> the way the
 x-axis tics are labelled. Gnuplot tries to be intelligent in this labelling, but
-it doesn't always to what the user wants. The labelling can be controlled with
+it doesn't always do what the user wants. The labelling can be controlled with
 the gnuplot C<set format> command, which takes the same type of format string as
 C<--timefmt>. Example:
 
@@ -1131,7 +1223,7 @@ C<--timefmt>. Example:
    awk '$1 ~ /..:..:../ && $8 ~/^[0-9\.]*$/ {print $1,$8; fflush()}' |
    feedgnuplot --stream --domain
                 --lines --timefmt '%H:%M:%S'
-                --extracmds 'set format x "%H:%M:%S"'
+                --set 'format x "%H:%M:%S"'
 
 This plots the 'idle' CPU consumption against time.
 
@@ -1222,10 +1314,10 @@ data file can be plotted simply with
 
  $ ./data
 
-The caveats here are that on Linux the whole #! line is limited to 127 charaters
-and that the full path to feedgnuplot must be given. The 127 character limit is
-a serious limitation, but this can likely be resolved with a kernel patch. I
-have only tried on Linux 2.6.
+The caveats here are that on Linux the whole #! line is limited to 127
+characters and that the full path to feedgnuplot must be given. The 127
+character limit is a serious limitation, but this can likely be resolved with a
+kernel patch. I have only tried on Linux 2.6.
 
 =head3 Self-plotting data with perl inline data
 
@@ -1271,14 +1363,14 @@ it to the plotter.
 
 =item
 
---[no]domain
+--C<[no]domain>
 
 If enabled, the first element of each line is the domain variable. If not, the
 point index is used
 
 =item
 
---[no]dataid
+--C<[no]dataid>
 
 If enabled, each data point is preceded by the ID of the data set that point
 corresponds to. This ID is interpreted as a string, NOT as just a number. If not
@@ -1290,23 +1382,23 @@ As an example, if line 3 of the input is "0 9 1 20" then
 
 =item
 
-'--nodomain --nodataid' would parse the 4 numbers as points in 4 different
+C<--nodomain --nodataid> would parse the 4 numbers as points in 4 different
 curves at x=3
 
 =item
 
-'--domain --nodataid' would parse the 4 numbers as points in 3 different
+C<--domain --nodataid> would parse the 4 numbers as points in 3 different
 curves at x=0. Here, 0 is the x-variable and 9,1,20 are the data values
 
 =item
 
-'--nodomain --dataid' would parse the 4 numbers as points in 2 different
+C<--nodomain --dataid> would parse the 4 numbers as points in 2 different
 curves at x=3. Here 0 and 1 are the data IDs and 9 and 20 are the
 data values
 
 =item
 
-'--domain --dataid' would parse the 4 numbers as a single point at
+C<--domain --dataid> would parse the 4 numbers as a single point at
 x=0. Here 9 is the data ID and 1 is the data value. 20 is an extra
 value, so it is ignored. If another value followed 20, we'd get another
 point in curve ID 20
@@ -1315,28 +1407,27 @@ point in curve ID 20
 
 =item
 
---[no]3d
+C<--[no]3d>
 
-Do [not] plot in 3D. This only makes sense with --domain. Each domain here is an
-(x,y) tuple
+Do [not] plot in 3D. This only makes sense with C<--domain>. Each domain here is
+an (x,y) tuple
 
 =item
 
---timefmt [format]
+--C<timefmt [format]>
 
 Interpret the X data as a time/date, parsed with the given format
 
 =item
 
---colormap
+C<--colormap>
 
 Show a colormapped xy plot. Requires extra data for the color. zmin/zmax can be
-used to set the extents of the colors. Automatically increments
-C<--extraValuesPerPoint>
+used to set the extents of the colors. Automatically sets the C<--rangesize>.
 
 =item
 
---stream [period]
+C<--stream [period]>
 
 Plot the data as it comes in, in realtime. If period is given, replot every
 period seconds. If no period is given, replot at 1Hz. If the period is given as
@@ -1345,55 +1436,54 @@ L</"Real-time streaming data"> section of the man page.
 
 =item
 
---[no]lines
+C<--[no]lines>
 
 Do [not] draw lines to connect consecutive points
 
 =item
 
---[no]points
+C<--[no]points>
 
 Do [not] draw points
 
 =item
 
---circles
+C<--circles>
 
 Plot with circles. This requires a radius be specified for each point.
-Automatically increments C<--extraValuesPerPoint>). C<Not> supported for 3d
-plots.
+Automatically sets the C<--rangesize>. C<Not> supported for 3d plots.
 
 =item
 
---title xxx
+C<--title xxx>
 
 Set the title of the plot
 
 =item
 
---legend curveID legend
+C<--legend curveID legend>
 
 Set the label for a curve plot. Use this option multiple times for multiple
-curves. With --dataid, curveID is the ID. Otherwise, it's the index of the
+curves. With C<--dataid>, curveID is the ID. Otherwise, it's the index of the
 curve, starting at 0
 
 =item
 
---autolegend
+C<--autolegend>
 
-Use the curve IDs for the legend. Titles given with --legend override these
+Use the curve IDs for the legend. Titles given with C<--legend> override these
 
 =item
 
---xlen xxx
+C<--xlen xxx>
 
-When using --stream, sets the size of the x-window to plot. Omit this or set it
-to 0 to plot ALL the data. Does not make sense with 3d plots. Implies
---monotonic
+When using C<--stream>, sets the size of the x-window to plot. Omit this or set
+it to 0 to plot ALL the data. Does not make sense with 3d plots. Implies
+C<--monotonic>
 
 =item
 
---xmin/xmax/ymin/ymax/y2min/y2max/zmin/zmax xxx
+C<--xmin/xmax/ymin/ymax/y2min/y2max/zmin/zmax xxx>
 
 Set the range for the given axis. These x-axis bounds are ignored in a streaming
 plot. The y2-axis bound do not apply in 3d plots. The z-axis bounds apply
@@ -1401,52 +1491,52 @@ I<only> to 3d plots or colormaps.
 
 =item
 
---xlabel/ylabel/y2label/zlabel xxx
+C<--xlabel/ylabel/y2label/zlabel xxx>
 
 Label the given axis. The y2-axis label does not apply to 3d plots while the
 z-axis label applies I<only> to 3d plots.
 
 =item
 
---y2 xxx
+C<--y2 xxx>
 
-Plot the data specified by this curve ID on the y2 axis. Without --dataid, the
-ID is just an ordered 0-based index. Does not apply to 3d plots. Can be passed
-multiple times, or passed a comma-separated list. By default the y2-axis curves
-look the same as the y-axis ones. I.e. the viewer of the resulting plot has to
-be told which is which via an axes label, legend, etc. Prior to version 1.25 of
-feedgnuplot the curves plotted on the y2 axis were drawn with a thicker line.
-This is no longer the case, but that behavior can be brought back by passing
-something like
+Plot the data specified by this curve ID on the y2 axis. Without C<--dataid>,
+the ID is just an ordered 0-based index. Does not apply to 3d plots. Can be
+passed multiple times, or passed a comma-separated list. By default the y2-axis
+curves look the same as the y-axis ones. I.e. the viewer of the resulting plot
+has to be told which is which via an axes label, legend, etc. Prior to version
+1.25 of feedgnuplot the curves plotted on the y2 axis were drawn with a thicker
+line. This is no longer the case, but that behavior can be brought back by
+passing something like
 
- --y2 curveid --curvestyle curveid 'linewidth 3'
+ --y2 curveid --style curveid 'linewidth 3'
 
 =item
 
---histogram curveID
+C<--histogram curveID>
 
 
 Set up a this specific curve to plot a histogram. The bin width is given with
-the --binwidth option (assumed 1.0 if omitted). --histogram does NOT touch the
-drawing style. It is often desired to plot these with boxes, and this MUST be
-explicitly requested with --curvestyleall 'with boxes'. This works with --domain
-and/or --stream, but in those cases the x-value is used ONLY to cull old data
-because of --xlen or --monotonic. I.e. the x-values are NOT drawn in any way.
-Can be passed multiple times, or passed a comma- separated list
+the C<--binwidth> option (assumed 1.0 if omitted). C<--histogram> does I<not>
+touch the drawing style. It is often desired to plot these with boxes, and this
+I<must> be explicitly requested by C<--with boxes>. This works with C<--domain>
+and/or C<--stream>, but in those cases the x-value is used I<only> to cull old
+data because of C<--xlen> or C<--monotonic>. I.e. the x-values are I<not> drawn
+in any way. Can be passed multiple times, or passed a comma- separated list
 
 =item
 
---binwidth width
+C<--binwidth width>
 
 The width of bins when making histograms. This setting applies to ALL histograms
 in the plot. Defaults to 1.0 if not given.
 
 =item
 
---histstyle style
+C<--histstyle style>
 
 Normally, histograms are generated with the 'smooth freq' gnuplot style.
---histstyle can be used to select different 'smooth' settings. Allowed are
+C<--histstyle> can be used to select different 'smooth' settings. Allowed are
 'unique', 'cumulative' and 'cnormal'. 'unique' indicates whether a bin has at
 least one item in it: instead of counting the items, it'll always report 0 or 1.
 'cumulative' is the integral of the "normal" histogram. 'cnormal' is like
@@ -1454,58 +1544,100 @@ least one item in it: instead of counting the items, it'll always report 0 or 1.
 
 =item
 
---curvestyle curveID
+C<--style curveID style>
 
-style Additional styles per curve. With --dataid, curveID is the ID. Otherwise,
+Additional styles per curve. With C<--dataid>, curveID is the ID. Otherwise,
 it's the index of the curve, starting at 0. Use this option multiple times for
-multiple curves. --curvestylall does NOT apply to curves that have a
---curvestyle
+multiple curves. C<--styleall> does I<not> apply to curves that have a
+C<--style>
 
 =item
 
---curvestyleall xxx
+C<--curvestyle curveID>
 
-Additional styles for all curves that have no --curvestyle
+Synonym for C<--style>
 
 =item
 
---extracmds xxx
+C<--styleall xxx>
 
-Additional commands. These could contain extra global styles for instance. Can
-be passed multiple times.
+Additional styles for all curves that have no C<--style>. This is overridden by
+any applicable C<--style>. Exclusive with C<--with>.
 
 =item
 
---square
+C<--curvestyleall xxx>
+
+Synonym for C<--styleall>
+
+=item
+
+C<--with xxx>
+
+Same as C<--styleall>, but prefixed with "with". Thus
+
+ --with boxes
+
+is equivalent to
+
+ --styleall 'with boxes'
+
+Exclusive with C<--styleall>.
+
+=item
+
+C<--extracmds xxx>
+
+Additional commands to pass on to gnuplot verbatim. These could contain extra
+global styles for instance. Can be passed multiple times.
+
+=item
+
+C<--set xxx>
+
+Additional 'set' commands to pass on to gnuplot verbatim. C<--set 'a b c'> will
+result in gnuplot seeing a C<set a b c> command. Can be passed multiple times.
+
+=item
+
+C<--unset xxx>
+
+Additional 'unset' commands to pass on to gnuplot verbatim. C<--unset 'a b c'>
+will result in gnuplot seeing a C<unset a b c> command. Can be passed multiple
+times.
+
+=item
+
+C<--square>
 
 Plot data with aspect ratio 1. For 3D plots, this controls the aspect ratio for
 all 3 axes
 
 =item
 
---square_xy
+C<--square_xy>
 
 For 3D plots, set square aspect ratio for ONLY the x,y axes
 
 =item
 
---hardcopy xxx
+C<--hardcopy xxx>
 
 If not streaming, output to a file specified here. Format inferred from
-filename, unless specified by --terminal
+filename, unless specified by C<--terminal>
 
 =item
 
---terminal xxx
+C<--terminal xxx>
 
 String passed to 'set terminal'. No attempts are made to validate this.
---hardcopy sets this to some sensible defaults if --hardcopy is given .png,
-.pdf, .ps, .eps or .svg. If any other file type is desired, use both --hardcopy
-and --terminal
+C<--hardcopy> sets this to some sensible defaults if --hardcopy is given .png,
+.pdf, .ps, .eps or .svg. If any other file type is desired, use both
+C<--hardcopy> and C<--terminal>
 
 =item
 
---maxcurves xxx
+C<--maxcurves xxx>
 
 The maximum allowed number of curves. This is 100 by default, but can be reset
 with this option. This exists purely to prevent perl from allocating all of the
@@ -1513,34 +1645,53 @@ system's memory when reading bogus data
 
 =item
 
---monotonic
+C<--monotonic>
 
-If --domain is given, checks to make sure that the x- coordinate in the input
+If C<--domain> is given, checks to make sure that the x- coordinate in the input
 data is monotonically increasing. If a given x-variable is in the past, all data
-currently cached for this curve is purged. Without --monotonic, all data is
-kept. Does not make sense with 3d plots. No --monotonic by default. The data is
+currently cached for this curve is purged. Without C<--monotonic>, all data is
+kept. Does not make sense with 3d plots. No C<--monotonic> by default. The data is
 replotted before being purged
 
 =item
 
---extraValuesPerPoint
+C<--rangesize curveID xxx>
 
-xxx How many extra values are given for each data point. Normally this is 0, and
-does not need to be specified, but sometimes we want extra data, like for colors
-or point sizes or error bars, etc. feedgnuplot options that require this
-(colormap, circles) automatically set it. This option is ONLY needed if unknown
-styles are used, with --curvestyleall for instance
+The options C<--rangesizeall>, C<--rangesize> and C<--extraValuesPerPoint> set
+the number of values are needed to represent each point being plotted (see
+L</"Multi-value style support"> above). These options are I<only> needed if
+unknown styles are used, with C<--styleall> or C<--with> for instance.
+
+C<--rangesize> is used to set how many values are needed to represent the range
+of a point for a particular curve. This overrides any defaults that may exist
+for this curve only.
 
 =item
 
---dump
+C<--rangesizeall xxx>
+
+Like C<--rangesize>, but applies to I<all> the curves.
+
+C<--extraValuesPerPoint xxx>
+
+Like C<--rangesizeall>, but instead of overriding the default, adds to it. For
+example, if plotting non-lopsided y errorbars gnuplot wants (x,y,ydelta) tuples.
+These can be specified both with C<--rangesizeall 2> (because there are 2 range
+values) or C<--extraValuesPerPoint 1> (because there's 1 more value than usual).
+
+This option is I<only> needed if unknown styles are used, with C<--styleall> or
+C<--with> for instance.
+
+=item
+
+C<--dump>
 
 Instead of printing to gnuplot, print to STDOUT. Very useful for debugging. It
 is possible to send the output produced this way to gnuplot directly.
 
 =item
 
---exit
+C<--exit>
 
 Terminate the feedgnuplot process after passing data to gnuplot. The window will
 persist but will not be interactive. Without this option feedgnuplot keeps
@@ -1549,13 +1700,13 @@ later versions of gnuplot and only with some gnuplot terminals.
 
 =item
 
---geometry
+C<--geometry>
 
 If using X11, specifies the size, position of the plot window
 
 =item
 
---version
+C<--version>
 
 Print the version and exit
 
@@ -1602,7 +1753,7 @@ in a Thinkpad.
 =head2 Plotting a histogram of file sizes in a directory
 
  $ ls -l | awk '{print $5/1e6}' |
-   feedgnuplot --histogram 0 --curvestyleall 'with boxes' --ymin 0 --xlabel 'File size (MB)' --ylabel Frequency
+   feedgnuplot --histogram 0 --with boxes --ymin 0 --xlabel 'File size (MB)' --ylabel Frequency
 
 =head1 ACKNOWLEDGEMENT
 

completions/bash/feedgnuplot

@@ -7,12 +7,19 @@ complete -W               \
     --colormap            \
     --curvestyle          \
     --curvestyleall       \
+    --style               \
+    --styleall            \
+    --with                \
     --dataid              \
     --domain              \
     --dump                \
     --exit                \
     --extraValuesPerPoint \
+    --rangesizeall        \
+    --rangesize           \
     --extracmds           \
+    --set                 \
+    --unset               \
     --geometry            \
     --hardcopy            \
     --help                \

completions/zsh/_feedgnuplot

@@ -26,17 +26,24 @@ _arguments -S
     '--zmin:min Z:'                                                               \
     '--zmax:max Z:'                                                               \
     '*--y2:plot to place on the Y2 axis:'                                         \
-    '--curvestyleall[Additional styles for ALL curves]:style'                     \
+    '(--with)--curvestyleall[Additional styles for ALL curves]:style'             \
+    '(--with)--styleall[Additional styles for ALL curves]:style'                  \
+    '(--curvestyleall)--with[Additional styles for ALL curves]:style'             \
     '*--extracmds[Additional gnuplot commands]:command'                           \
+    '*--set[Additional 'set' gnuplot commands]:set-option'                        \
+    '*--unset[Additional 'unset' gnuplot commands]:unset-option'                  \
     '--square[Plot data with square aspect ratio]'                                \
     '--square_xy[For 3D plots, set square aspect ratio for ONLY the x,y axes]'    \
     '--hardcopy[Plot to a file]:filename'                                         \
     '--maxcurves[The maximum allowed number of curves]:number of curves'          \
     '(--3d)--monotonic[Resets plot if an X in the past is seen]'                  \
-    '--extraValuesPerPoint[How many extra values are given for each data point]:N'\
+    '(--rangesizeall)--extraValuesPerPoint[How many extra values are given for each data range]:N'\
+    '(--extraValuesPerPoint)--rangesizeall[How many values are given for each data range]:N'\
+    '*--rangesize[How many values comprise a data range in this curve]:curve id: :N:' \
     '--dump[Instead of printing to gnuplot, print to STDOUT]'                     \
     '--geometry[The X11 geometry string]:geometry string:'                        \
     '*--curvestyle[Additional styles for a curve]:curve id: :style:'              \
+    '*--style[Additional styles for a curve]:curve id: :style:'                   \
     '(--3d)*--histogram:plot to treat as a histogram:'                            \
     '--binwidth:Histogram bin width:'                                             \
     '--histstyle:Style of histogram:(frequency unique cumulative cnormal)'        \

debian/changelog

@@ -0,0 +1,85 @@
+feedgnuplot (1.34stir1-1) unstable; urgency=medium
+
+  * disabled --persist because on our arm board it confuses things
+
+ -- Dima Kogan <dima@secretsauce.net>  Fri, 22 Aug 2014 14:59:05 -0700
+
+feedgnuplot (1.34-1) unstable; urgency=medium
+
+  * Very minor upstream update
+  * gnuplot-nox can no satisfy the gnuplot dependency for feedgnuplot
+
+ -- Dima Kogan <dima@secretsauce.net>  Wed, 06 Aug 2014 15:19:56 -0700
+
+feedgnuplot (1.33-1) unstable; urgency=low
+
+  * Upstream update: fixed incorrect plotting of --timefmt --rangesize
+    plots
+
+ -- Dima Kogan <dima@secretsauce.net>  Thu, 06 Feb 2014 23:19:02 -0800
+
+feedgnuplot (1.32-1) unstable; urgency=low
+
+  * Added --rangesize and --rangesizeall. Different curves can now plot
+    different-size tuples
+
+ -- Dima Kogan <dima@secretsauce.net>  Wed, 05 Feb 2014 14:00:44 -0800
+
+feedgnuplot (1.30-1) unstable; urgency=low
+
+  * made the VCS links canonical
+  * added --set, --unset, --with, --style, --styleall
+
+ -- Dima Kogan <dima@secretsauce.net>  Fri, 24 Jan 2014 15:50:03 -0800
+
+feedgnuplot (1.28-1) unstable; urgency=low
+
+  * Upstream update:
+    - Removed example debianization
+    - Removed unreliable unit tests from automated testing (Closes: #731080)
+  * gnuplot dependency now favors graphical gnuplot packages
+  * Removed Anton Gladky from the Uploaders
+
+ -- Dima Kogan <dima@secretsauce.net>  Wed, 04 Dec 2013 02:05:08 -0800
+
+feedgnuplot (1.26-1) unstable; urgency=low
+
+  [ Dima Kogan ]
+  * Minor POD update
+  * Added test suite
+  * Added initial support for --timefmt. Currently time/date data is
+    supported only at the x-axis domain
+  * Added --exit option for force feedgnuplot to return even if gnuplot
+    may not yet be done rendering (patch by Eric Schulte)
+  * Reformatted the documentation
+  * y2-axis curves no longer have a thicker line by default
+  * --hardcopy now handles piped output (gnuplot 'set output |process'
+    syntax)
+
+  [ Anton Gladky ]
+  * Add libipc-run-perl to Build-Depends to execute tests
+
+ -- Dima Kogan <dima@secretsauce.net>  Sun, 20 Oct 2013 01:19:51 -0700
+
+feedgnuplot (1.24-2) unstable; urgency=low
+
+  * Now building the html documentation from the correct POD source
+
+ -- Dima Kogan <dima@secretsauce.net>  Sun, 28 Apr 2013 17:42:52 -0700
+
+feedgnuplot (1.24-1) unstable; urgency=low
+
+  * Fixed regression in --monotonic. This works again now
+  * moved POD back into the main source file. This fixes the broken usage
+    messages
+  * added --version
+  * fixed watchfile to work with newer github pages
+  * priority now optional
+
+ -- Dima Kogan <dima@secretsauce.net>  Fri, 08 Feb 2013 02:01:32 -0800
+
+feedgnuplot (1.23-2) unstable; urgency=low
+
+  * Initial Debian release (Closes: #686413)
+
+ -- Dima Kogan <dima@secretsauce.net>  Tue, 30 Oct 2012 11:14:01 -0700

debian/compat

@@ -0,0 +1 @@
+9

debian/control

@@ -0,0 +1,19 @@
+Source: feedgnuplot
+Section: science
+Priority: optional
+Build-Depends: debhelper (>= 9), libstring-shellquote-perl, perl, gawk, gnuplot, libipc-run-perl
+Maintainer: Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org>
+Uploaders: Dima Kogan <dima@secretsauce.net>
+Standards-Version: 3.9.4
+Homepage: https://github.com/dkogan/feedgnuplot
+Vcs-Git: git://anonscm.debian.org/debian-science/packages/feedgnuplot.git
+Vcs-Browser: http://anonscm.debian.org/gitweb/?p=debian-science/packages/feedgnuplot.git
+
+Package: feedgnuplot
+Architecture: all
+Depends: ${misc:Depends}, ${perl:Depends}, gnuplot-qt | gnuplot-x11 | gnuplot-nox
+Description: Pipe-oriented frontend to Gnuplot
+ Flexible, command-line-oriented frontend to Gnuplot. Creates plots from data
+ coming in on STDIN or given in a filename passed on the commandline. Various
+ data representations are supported, as is hardcopy output and streaming display
+ of live data.

debian/copyright

@@ -0,0 +1,24 @@
+Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Source: https://github.com/dkogan/feedgnuplot
+Upstream-Contact: Dima Kogan, <dima@secretsauce.net>
+Upstream-Name: feedgnuplot
+
+Files: *
+Copyright: 2011, Dima Kogan <dima@secretsauce.net>
+License: Artistic or GPL-1+
+
+License: Artistic
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the Artistic License, which comes with Perl.
+ .
+ On Debian GNU/Linux systems, the complete text of the Artistic License
+ can be found in `/usr/share/common-licenses/Artistic'.
+
+License: GPL-1+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 1, or (at your option)
+ any later version.
+ .
+ On Debian GNU/Linux systems, the complete text of version 1 of the
+ General Public License can be found in `/usr/share/common-licenses/GPL-1'.

debian/feedgnuplot.doc-base

@@ -0,0 +1,9 @@
+Document: feedgnuplot
+Title: Feedgnuplot Manual
+Author: Dima Kogan
+Abstract: Formatted manpage for feedgnuplot
+Section: Science/Data Analysis
+
+Format: HTML
+Index: /usr/share/doc/feedgnuplot/feedgnuplot.html
+Files: /usr/share/doc/feedgnuplot/feedgnuplot.html

debian/feedgnuplot.docs

@@ -0,0 +1 @@
+feedgnuplot.html

debian/feedgnuplot.install

@@ -0,0 +1,2 @@
+completions/bash/feedgnuplot /etc/bash_completion.d/
+completions/zsh/_feedgnuplot /usr/share/zsh/vendor-completions

debian/gbp.conf

@@ -0,0 +1,4 @@
+[DEFAULT]
+debian-branch = debian
+upstream-tag = v%(version)s
+pristine-tar = True

debian/rules

@@ -0,0 +1,12 @@
+#!/usr/bin/make -f
+
+%:
+	dh $@
+
+override_dh_auto_build:
+	dh_auto_build
+	pod2html --title=feedgnuplot bin/feedgnuplot > feedgnuplot.html
+
+override_dh_auto_clean:
+	rm -rf feedgnuplot.html pod2htm*
+	dh_auto_clean

debian/source/format

@@ -0,0 +1 @@
+3.0 (quilt)

debian/watch

@@ -0,0 +1,4 @@
+version=3
+opts=uversionmangle=s/(\d)[_\.\-\+]?((RC|rc|pre|dev|beta|alpha|b|a)\d*)$/$1~$2/,dversionmangle=s/\+(debian|dfsg|ds|deb)\d*$// \
+https://github.com/dkogan/feedgnuplot/tags .*/v?(\d.*)\.(?:tgz|tbz2|txz|tar\.(?:gz|bz2|xz))
+# Bart Martens <bartm@debian.org>  Sat, 22 Dec 2012 12:54:18 +0000

t/plots.t

@@ -17,14 +17,20 @@ BEGIN {
     exit(0);
   }
 
-  open(my $pipe, 'gnuplot --version |');
-  if( !$pipe )
+  my $gawkversion = `gawk -V`;
+  if( !$gawkversion || $@ )
+  {
+    print("1..0 # Skip: gawk is required for strftime() in the test suite. Skipping tests.\n");
+    exit(0);
+  }
+
+  my $gnuplotVersion = `gnuplot --version`;
+  if( !$gnuplotVersion || $@)
   {
     print("1..0 # Skip: gnuplot not installed. Tests require ver. 4.6.4; feedgnuplot works with any.\n");
     exit(0);
   }
 
-  my $gnuplotVersion = <$pipe>;
   chomp $gnuplotVersion;
   if ($gnuplotVersion ne "gnuplot 4.6 patchlevel 4")
   {
@@ -33,7 +39,7 @@ BEGIN {
   }
 }
 
-use Test::More tests => 52;
+use Test::More tests => 58;
 use File::Temp 'tempfile';
 use IPC::Run 'run';
 use String::ShellQuote;
@@ -320,7 +326,7 @@ tryplot( testname => 'basic line plot with bounds, square aspect ratio',
 EOF
 
 tryplot( testname => 'lines on both axes with labels, legends, titles',
-         cmd      => q{seq 5 | awk '{print 2*$1, $1*$1}'},
+         cmd      => q{seq 5 | gawk '{print 2*$1, $1*$1}'},
          options  => [qw(--lines --points),
                       '--legend', '0', 'data 0',
                       '--title', "Test plot",
@@ -369,7 +375,7 @@ tryplot( testname => 'lines on both axes with labels, legends, titles',
 EOF
 
 tryplot( testname => 'lines on both axes with labels, legends, titles; different styles',
-         cmd      => q{seq 5 | awk '{print 2*$1, $1*$1}'},
+         cmd      => q{seq 5 | gawk '{print 2*$1, $1*$1}'},
          options  => ['--legend', '0', 'data 0',
                       '--title', "Test plot",
                       qw(--y2 1 --y2label y2 --xlabel x --ylabel y --y2max 30),
@@ -419,7 +425,7 @@ tryplot( testname => 'lines on both axes with labels, legends, titles; different
 EOF
 
 tryplot( testname => 'domain plot',
-         cmd      => q{seq 5 | awk '{print 2*$1, $1*$1}'},
+         cmd      => q{seq 5 | gawk '{print 2*$1, $1*$1}'},
          options  => [qw(--lines --points), '--domain'],
          refplot  => <<'EOF' );
 
@@ -465,7 +471,7 @@ tryplot( testname => 'domain plot',
 EOF
 
 tryplot( testname => 'dataid plot',
-         cmd      => q{seq 5 | awk '{print 2*$1, $1*$1}'},
+         cmd      => q{seq 5 | gawk '{print 2*$1, $1*$1}'},
          options  => [qw(--lines --points),
                       qw(--dataid --autolegend)],
          refplot  => <<'EOF' );
@@ -512,7 +518,7 @@ tryplot( testname => 'dataid plot',
 EOF
 
 tryplot( testname => '3d spiral with bounds, labels',
-         cmd      => q{seq 50 | awk '{print 2*cos($1/5), sin($1/5), $1}'},
+         cmd      => q{seq 50 | gawk '{print 2*cos($1/5), sin($1/5), $1}'},
          options  => [qw(--lines --points),
                       qw(--3d --domain --zmin -5 --zmax 45 --zlabel z),
                      '--extracmds', 'set view 60,30'],
@@ -560,7 +566,7 @@ tryplot( testname => '3d spiral with bounds, labels',
 EOF
 
 tryplot( testname => '3d spiral with bounds, labels, square xy aspect ratio',
-         cmd      => q{seq 50 | awk '{print 2*cos($1/5), sin($1/5), $1}'},
+         cmd      => q{seq 50 | gawk '{print 2*cos($1/5), sin($1/5), $1}'},
          options  => [qw(--lines --points),
                       qw(--3d --domain --zmin -5 --zmax 45 --zlabel z),
                      '--extracmds', 'set view 60,30', '--square_xy'],
@@ -608,7 +614,7 @@ tryplot( testname => '3d spiral with bounds, labels, square xy aspect ratio',
 EOF
 
 tryplot( testname => 'Monotonicity check',
-         cmd      => q{seq 10 | awk '{print (NR-1)%5,NR}'},
+         cmd      => q{seq 10 | gawk '{print (NR-1)%5,NR}'},
          options  => [qw(--lines --points --domain --monotonic)],
          refplot  => <<'EOF' );
 
@@ -655,7 +661,7 @@ EOF
 
 
 tryplot( testname => 'basic --timefmt plot',
-         cmd      => q{seq 5 | awk '{print strftime("%d %b %Y %T",1382249107+$1,1),$1}'},
+         cmd      => q{seq 5 | gawk '{print strftime("%d %b %Y %T",1382249107+$1,1),$1}'},
          options  => ['--domain', '--timefmt', '%d %b %Y %H:%M:%S'],
          refplot  => <<'EOF' );
 
@@ -701,7 +707,7 @@ tryplot( testname => 'basic --timefmt plot',
 EOF
 
 tryplot( testname => '--timefmt plot with bounds',
-         cmd      => q{seq 5 | awk '{print strftime("%d %b %Y %T",1382249107+$1,1),$1}'},
+         cmd      => q{seq 5 | gawk '{print strftime("%d %b %Y %T",1382249107+$1,1),$1}'},
          options  => ['--domain', '--timefmt', '%d %b %Y %H:%M:%S',
                       '--xmin', '20 Oct 2013 06:05:00',
                       '--xmax', '20 Oct 2013 06:05:20'],
@@ -749,7 +755,7 @@ tryplot( testname => '--timefmt plot with bounds',
 EOF
 
 tryplot( testname => '--timefmt plot with --monotonic',
-         cmd      => q{seq 10 | awk '{x=(NR-1)%5; print strftime("%d %b %Y %T",1382249107+x,1),$1}'},
+         cmd      => q{seq 10 | gawk '{x=(NR-1)%5; print strftime("%d %b %Y %T",1382249107+x,1),$1}'},
          options  => ['--domain', '--timefmt', '%d %b %Y %H:%M:%S',
                       '--monotonic'],
          refplot  => <<'EOF' );
@@ -795,10 +801,57 @@ tryplot( testname => '--timefmt plot with --monotonic',
 
 EOF
 
+tryplot( testname => '--timefmt with custom rangesize',
+         cmd      => q{seq 5 | gawk '{print strftime("%d %b %Y %T",1382249107+$1,1),$1,$1/10}'},
+         options  => ['--domain', '--timefmt', '%d %b %Y %H:%M:%S',
+                      qw(--with errorbars --rangesizeall 2)],
+         refplot  => <<'EOF' );
+
+
+  5.5 ++---------+-----------+----------+----------+----------+-----------+----------+---------**
+      +          +           +          +          +          +           +          +          *
+      |                                                                                         *
+    5 ++                                                                                       +A
+      |                                                                                         *
+      |                                                                                         *
+      |                                                                                         *
+  4.5 ++                                                                                       **
+      |                                                                  ***                    |
+      |                                                                   *                     |
+    4 ++                                                                  A                    ++
+      |                                                                   *                     |
+      |                                                                   *                     |
+      |                                                                  ***                    |
+  3.5 ++                                                                                       ++
+      |                                           ***                                           |
+      |                                            *                                            |
+    3 ++                                           A                                           ++
+      |                                            *                                            |
+      |                                            *                                            |
+      |                                           ***                                           |
+  2.5 ++                                                                                       ++
+      |                                                                                         |
+      |                     ***                                                                 |
+    2 ++                     A                                                                 ++
+      |                      *                                                                  |
+      |                     ***                                                                 |
+      |                                                                                         |
+  1.5 ++                                                                                       ++
+      |                                                                                         |
+      |                                                                                         |
+    1 A*                                                                                       ++
+      **                                                                                        |
+      |                                                                                         |
+      +          +           +          +          +          +           +          +          +
+  0.5 ++---------+-----------+----------+----------+----------+-----------+----------+---------++
+    05:08      05:08       05:09      05:09      05:10      05:10       05:11      05:11      05:12
+
+EOF
+
 tryplot( testname => 'Error bars (using extraValuesPerPoint)',
-         cmd      => q{seq 5 | awk '{print $1,$1,$1/10}'},
+         cmd      => q{seq 5 | gawk '{print $1,$1,$1/10}'},
          options  => [qw(--domain),
-                      qw(--extraValuesPerPoint 1 --curvestyle 0), 'with errorbars'],
+                      qw(--extraValuesPerPoint 1 --with errorbars)],
          refplot  => <<'EOF' );
 
 
@@ -843,6 +896,103 @@ tryplot( testname => 'Error bars (using extraValuesPerPoint)',
 EOF
 
 
+tryplot( testname => 'Error bars (using rangesizeall)',
+         cmd      => q{seq 5 | gawk '{print $1,$1,$1/10}'},
+         options  => [qw(--domain),
+                      qw(--rangesizeall 2 --with errorbars)],
+         refplot  => <<'EOF' );
+
+
+  5.5 ++---------+-----------+----------+----------+----------+-----------+----------+---------**
+      +          +           +          +          +          +           +          +          *
+      |                                                                                         *
+    5 ++                                                                                       +A
+      |                                                                                         *
+      |                                                                                         *
+      |                                                                                         *
+  4.5 ++                                                                                       **
+      |                                                                  ***                    |
+      |                                                                   *                     |
+    4 ++                                                                  A                    ++
+      |                                                                   *                     |
+      |                                                                   *                     |
+      |                                                                  ***                    |
+  3.5 ++                                                                                       ++
+      |                                           ***                                           |
+      |                                            *                                            |
+    3 ++                                           A                                           ++
+      |                                            *                                            |
+      |                                            *                                            |
+      |                                           ***                                           |
+  2.5 ++                                                                                       ++
+      |                                                                                         |
+      |                     ***                                                                 |
+    2 ++                     A                                                                 ++
+      |                      *                                                                  |
+      |                     ***                                                                 |
+      |                                                                                         |
+  1.5 ++                                                                                       ++
+      |                                                                                         |
+      |                                                                                         |
+    1 A*                                                                                       ++
+      **                                                                                        |
+      |                                                                                         |
+      +          +           +          +          +          +           +          +          +
+  0.5 ++---------+-----------+----------+----------+----------+-----------+----------+---------++
+      1         1.5          2         2.5         3         3.5          4         4.5         5
+
+EOF
+
+
+tryplot( testname => 'Error bars (using rangesize, rangesizeall)',
+         cmd      => q{seq 5 | gawk '{print $1,"vert",$1,$1/10,"horiz",5-$1,$1-$1/5,$1+$1/20}'},
+         options  => [qw(--domain --dataid),
+                      qw(--rangesize vert 2 --rangesizeall 3 --with xerrorbars --style vert), 'with errorbars',
+                      qw(--xmin 1 --xmax 5 --ymin 0.5 --ymax 5.5)],
+         refplot  => <<'EOF' );
+
+
+    +-----------+----------+-----------+----------+-----------+----------+-----------+---------**
+    +           +          +           +          +           +          +           +          *
+    |                                                                                           *
+  5 ++                                                                                         +A
+    |                                                                                           *
+    |                                                                                           *
+    |                                                                                           *
+    |                                                                                          **
+    |                                                                   ***                     |
+    ##                                                                   *                      |
+  4 B#                                                                   A                     ++
+    ##                                                                   *                      |
+    |                                                                    *                      |
+    |                                                                   ***                     |
+    |                                                                                           |
+    |                                            ***                                            |
+    |             #          #                    *                                             |
+  3 ++            #########B##                    A                                            ++
+    |             #          #                    *                                             |
+    |                                             *                                             |
+    |                                            ***                                            |
+    |                                                                                           |
+    |                                                                                           |
+    |                     ***       #                #                                          |
+  2 ++                     A        ##############B###                                         ++
+    |                      *        #                #                                          |
+    |                     ***                                                                   |
+    |                                                                                           |
+    |                                                                                           |
+    |                                                                                           |
+    |                                                  #                      #                 |
+  1 A*                                                 ##################B#####                ++
+    **                                                 #                      #                 |
+    |                                                                                           |
+    +           +          +           +          +           +          +           +          +
+    +-----------+----------+-----------+----------+-----------+----------+-----------+----------+
+    1          1.5         2          2.5         3          3.5         4          4.5         5
+
+EOF
+
+
 SKIP:
 {
 
@@ -860,7 +1010,7 @@ skip "Skipping unreliable tests. Set RUN_ALL_TESTS environment variable to run t
 
 
 tryplot( testname => 'Histogram plot',
-         cmd      => q{seq 50 | awk '{print $1*$1}'},
+         cmd      => q{seq 50 | gawk '{print $1*$1}'},
          options  => [qw(--lines --points),
                       qw(--histo 0 --binwidth 50 --ymin 0 --curvestyleall), 'with boxes'],
          refplot  => <<'EOF' );
@@ -907,7 +1057,7 @@ tryplot( testname => 'Histogram plot',
 EOF
 
 tryplot( testname => 'Cumulative histogram',
-         cmd      => q{seq 50 | awk '{print $1*$1}'},
+         cmd      => q{seq 50 | gawk '{print $1*$1}'},
          options  => [qw(--lines --points),
                       qw(--histo 0 --histstyle cum --binwidth 50 --ymin 0 --curvestyleall), 'with boxes'],
          refplot  => <<'EOF' );
@@ -954,7 +1104,7 @@ tryplot( testname => 'Cumulative histogram',
 EOF
 
 tryplot( testname => 'Circles',
-         cmd      => q{seq 5 | awk '{print $1,$1,$1/10}'},
+         cmd      => q{seq 5 | gawk '{print $1,$1,$1/10}'},
          options  => [qw(--circles --domain)],
          refplot  => <<'EOF' );
 
@@ -1008,7 +1158,7 @@ note( "Starting to run streaming tests. These will take several seconds each" );
 # points, and then "exit", so I should have two frames worth of data plotted. I
 # pre-send a 0 so that the gnuplot autoscaling is always well-defined
 tryplot( testname => 'basic streaming test',
-         cmd      => q{seq 500 | awk 'BEGIN{ print 0; } {print (NR==3)? "exit" : $0; fflush(); system("sleep 1.2");}'},
+         cmd      => q{seq 500 | gawk 'BEGIN{ print 0; } {print (NR==3)? "exit" : $0; fflush(); system("sleep 1.2");}'},
          options  => [qw(--lines --points --stream)],
          refplot  => <<'EOF' );
 
@@ -1094,7 +1244,7 @@ tryplot( testname => 'basic streaming test',
 EOF
 
 tryplot( testname => 'basic streaming test, twice as fast',
-         cmd      => q{seq 500 | awk 'BEGIN{ print 0; } {print (NR==3)? "exit" : $0; fflush(); system("sleep 0.6");}'},
+         cmd      => q{seq 500 | gawk 'BEGIN{ print 0; } {print (NR==3)? "exit" : $0; fflush(); system("sleep 0.6");}'},
          options  => [qw(--lines --points --stream 0.4)],
          refplot  => <<'EOF' );
 
@@ -1181,7 +1331,7 @@ EOF
 
 
 tryplot( testname => 'streaming with --xlen',
-         cmd      => q{seq 500 | awk 'BEGIN{ print 0; } {print (NR==3)? "exit" : $0; fflush(); system("sleep 0.6");}'},
+         cmd      => q{seq 500 | gawk 'BEGIN{ print 0; } {print (NR==3)? "exit" : $0; fflush(); system("sleep 0.6");}'},
          options  => [qw(--lines --points --stream 0.4 --xlen 1.1)],
          refplot  => <<'EOF' );
 
@@ -1267,7 +1417,7 @@ tryplot( testname => 'streaming with --xlen',
 EOF
 
 tryplot( testname => 'streaming with --monotonic',
-         cmd      => q{seq 500 | awk '{if(NR==11) {print "exit";} else {x=(NR-1)%5; if(x==0) {print -1,-1;} print x,NR;}; fflush(); system("sleep 0.6");}'},
+         cmd      => q{seq 500 | gawk '{if(NR==11) {print "exit";} else {x=(NR-1)%5; if(x==0) {print -1,-1;} print x,NR;}; fflush(); system("sleep 0.6");}'},
          options  => [qw(--lines --points --stream 0.4 --domain --monotonic)],
          refplot  => <<'EOF' );
 
@@ -1673,7 +1823,7 @@ tryplot( testname => 'streaming with --monotonic',
 EOF
 
 tryplot( testname => '--timefmt streaming plot with --xlen',
-         cmd      => q{seq 5 | awk 'BEGIN{ print strftime("%d %b %Y %T",1382249107-1,1),-4;} {if(NR==3) {print "exit";} else{ print strftime("%d %b %Y %T",1382249107+$1,1),$1;} fflush(); system("sleep 0.6")}'},
+         cmd      => q{seq 5 | gawk 'BEGIN{ print strftime("%d %b %Y %T",1382249107-1,1),-4;} {if(NR==3) {print "exit";} else{ print strftime("%d %b %Y %T",1382249107+$1,1),$1;} fflush(); system("sleep 0.6")}'},
          options  => ['--points', '--lines',
                       '--domain', '--timefmt', '%d %b %Y %H:%M:%S',
                       qw(--stream 0.4 --xlen 3)],
@@ -1761,7 +1911,7 @@ tryplot( testname => '--timefmt streaming plot with --xlen',
 EOF
 
 tryplot( testname => '--timefmt streaming plot with --monotonic',
-         cmd      => q{seq 10 | awk '{x=(NR-1)%5; if(x==0) {print strftime("%d %b %Y %T",1382249107-1,-4),-4;} print strftime("%d %b %Y %T",1382249107+x,1),NR; fflush(); system("sleep 0.6")}'},
+         cmd      => q{seq 10 | gawk '{x=(NR-1)%5; if(x==0) {print strftime("%d %b %Y %T",1382249107-1,-4),-4;} print strftime("%d %b %Y %T",1382249107+x,1),NR; fflush(); system("sleep 0.6")}'},
          options  => ['--points', '--lines',
                       '--domain', '--timefmt', '%d %b %Y %H:%M:%S',
                       qw(--stream 0.4 --monotonic)],
@@ -2177,7 +2327,7 @@ sub tryplot
   my %args = @_;
 
   my @options = ('--exit',
-                 '--extracmds', 'unset grid',
+                 qw(--unset grid),
                  '--terminal', 'dumb 100,40');
   unshift @options, @{$args{options}};