diff --git a/CMakeLists.txt b/CMakeLists.txt
index 1de0ef2..7ca4192 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -1,29 +1,19 @@
 cmake_minimum_required(VERSION 3.15.2)
-
 # 设置工程名称和语言
 project(NETCDF_CXX)
+# 设置编译类型
+set(CMAKE_BUILD_TYPE Release)
+
+if(${CMAKE_HOST_SYSTEM_NAME} STREQUAL "Windows")
+    # 设置windows安装地址
+    set(CMAKE_INSTALL_PREFIX D:/Library)
+else()
+    # 设置Linux/Unix系统安装地址
+    set(CMAKE_INSTALL_PREFIX /opt/stow/netcdfcxx_legacy)
+endif()
 
 message(STATUS "Platform: " ${CMAKE_HOST_SYSTEM_NAME})
-if(${CMAKE_HOST_SYSTEM_NAME} STREQUAL "Linux")
-    # 配置netcdf C语言库的地址
-    set(LIB_NETCDF /usr/local)
-elseif (${CMAKE_HOST_SYSTEM_NAME} STREQUAL "Darwin" AND ${CMAKE_HOST_SYSTEM_PROCESSOR} STREQUAL "x86_64")
-    # 配置netcdf C语言库的地址
-    set(LIB_NETCDF /usr/local)
-elseif (${CMAKE_HOST_SYSTEM_NAME} STREQUAL "Darwin")
-    # 配置netcdf C语言库的地址
-    set(LIB_NETCDF /opt/homebrew)
-elseif(${CMAKE_HOST_SYSTEM_NAME} STREQUAL "Windows")
-    set(LIB_NETCDF C:/Program\ Files/netCDF\ 4.8.0)
-    # 由于不能使用config.sh 我们需要单独为windows单独设置安装地址
-    set(CMAKE_INSTALL_PREFIX D:/Library)
-endif()
 message(STATUS "Install prefix: " ${CMAKE_INSTALL_PREFIX})
 
-# 设置netcdf c接口的库文件地址
-set(LIB_NETCDF_INC ${LIB_NETCDF}/include)
-set(LIB_NETCDF_LIB ${LIB_NETCDF}/lib)
-message(STATUS "netCDF directory: " ${LIB_NETCDF})
-
 # 添加源文件地址
 add_subdirectory(src/)
\ No newline at end of file
diff --git a/config.sh b/config.sh
deleted file mode 100755
index c97b965..0000000
--- a/config.sh
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/bash
-
-cmd=${1}
-package=netcdfcxx_legacy
-address=/opt/stow
-targetdir=/usr/local
-
-if [[ ${cmd} == "configure" && ! -d "build/" ]]; then
-	mkdir build && cd build && cmake .. -DCMAKE_INSTALL_PREFIX=${address}/${package} -DCMAKE_BUILD_TYPE=Release
-elif [[ ${cmd} == "configure" ]]; then
-	cd build && rm -rf * && cmake .. -DCMAKE_INSTALL_PREFIX=${address}/${package} -DCMAKE_BUILD_TYPE=Release
-elif [[ ${cmd} == "build" ]]; then
-	cd build && make
-elif [[ ${cmd} == "install" ]]; then
-	cd build && sudo make install
-	sudo stow --dir=${address} --target=${targetdir} ${package}
-fi
\ No newline at end of file
diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt
index 50a9a66..0d7d769 100644
--- a/src/CMakeLists.txt
+++ b/src/CMakeLists.txt
@@ -1,9 +1,11 @@
 # 设定源文件文件夹
 aux_source_directory(lib/ NETCDF_SRC)
-# netcdf安装后的动态库与静态库的地址不一样 需要手动在cmake生成的VS工程内添加下面的库地址
-# 方法如下：gctl->属性->链接器->附件库目录（选择编辑，并选择netcdf的可执行文件地址）
-#set(LIB_NETCDF_BIN C:/Program\ Files/netCDF\ 4.8.0/bin)
-include_directories(${LIB_NETCDF_INC})
+
+# 寻找netCDF库地址
+find_package(netCDF REQUIRED)
+if(netCDF_FOUND)
+    include_directories(${netCDF_INCLUDE_DIR})
+endif()
 
 # 设置编译选项
 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -O2")
@@ -25,7 +27,7 @@ set_target_properties(netcdfcxx_legacy_static PROPERTIES CLEAN_DIRECT_OUTPUT 1)
 # 设置动态库的版本号
 set_target_properties(netcdfcxx_legacy PROPERTIES VERSION 1.0 SOVERSION 1.0)
 
-find_library(NETCDF_LIBRARY netcdf ${LIB_NETCDF_LIB})
+find_library(NETCDF_LIBRARY ${netCDF_LIBRARIES} ${netCDF_LIB_DIR})
 target_link_libraries(netcdfcxx_legacy PUBLIC ${NETCDF_LIBRARY})
 target_link_libraries(netcdfcxx_legacy_static ${NETCDF_LIBRARY})
 
diff --git a/stow_config.sh b/stow_config.sh
new file mode 100755
index 0000000..ce22b7a
--- /dev/null
+++ b/stow_config.sh
@@ -0,0 +1,3 @@
+#!/bin/bash
+
+sudo stow --dir=/opt/stow --target=/usr/local netcdfcxx_legacy
\ No newline at end of file