2020-10-30 21:02:14 +01:00
|
|
|
# Copyright 2019-2020 Lawrence Livermore National Security, LLC and other
|
|
|
|
|
# Archspec Project Developers. See the top-level COPYRIGHT file for details.
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
#
|
|
|
|
|
# SPDX-License-Identifier: (Apache-2.0 OR MIT)
|
2024-08-15 19:49:07 +02:00
|
|
|
"""Types and functions to manage information on CPU microarchitectures."""
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
import functools
|
|
|
|
|
import platform
|
2019-10-21 19:24:57 +02:00
|
|
|
import re
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
import warnings
|
|
|
|
|
|
2025-05-21 11:25:02 +02:00
|
|
|
import _vendoring.archspec
|
|
|
|
|
import _vendoring.archspec.cpu.alias
|
|
|
|
|
import _vendoring.archspec.cpu.schema
|
2024-03-12 09:31:15 +01:00
|
|
|
|
2020-10-30 21:02:14 +01:00
|
|
|
from .alias import FEATURE_ALIASES
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
from .schema import LazyDictionary
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
def coerce_target_names(func):
|
|
|
|
|
"""Decorator that automatically converts a known target name to a proper
|
|
|
|
|
Microarchitecture object.
|
|
|
|
|
"""
|
2020-10-30 21:02:14 +01:00
|
|
|
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
@functools.wraps(func)
|
|
|
|
|
def _impl(self, other):
|
2022-12-20 11:22:50 +01:00
|
|
|
if isinstance(other, str):
|
2020-10-30 21:02:14 +01:00
|
|
|
if other not in TARGETS:
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
msg = '"{0}" is not a valid target name'
|
|
|
|
|
raise ValueError(msg.format(other))
|
2020-10-30 21:02:14 +01:00
|
|
|
other = TARGETS[other]
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
|
|
|
|
|
return func(self, other)
|
2020-10-30 21:02:14 +01:00
|
|
|
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
return _impl
|
|
|
|
|
|
|
|
|
|
|
2022-12-20 11:22:50 +01:00
|
|
|
class Microarchitecture:
|
2020-10-30 21:02:14 +01:00
|
|
|
"""Represents a specific CPU micro-architecture.
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
|
2020-10-30 21:02:14 +01:00
|
|
|
Args:
|
|
|
|
|
name (str): name of the micro-architecture (e.g. skylake).
|
|
|
|
|
parents (list): list of parents micro-architectures, if any.
|
|
|
|
|
Parenthood is considered by cpu features and not
|
|
|
|
|
chronologically. As such each micro-architecture is
|
|
|
|
|
compatible with its ancestors. For example "skylake",
|
|
|
|
|
which has "broadwell" as a parent, supports running binaries
|
|
|
|
|
optimized for "broadwell".
|
|
|
|
|
vendor (str): vendor of the micro-architecture
|
2024-03-12 09:31:15 +01:00
|
|
|
features (set of str): supported CPU flags. Note that the semantic
|
2020-10-30 21:02:14 +01:00
|
|
|
of the flags in this field might vary among architectures, if
|
|
|
|
|
at all present. For instance x86_64 processors will list all
|
|
|
|
|
the flags supported by a given CPU while Arm processors will
|
|
|
|
|
list instead only the flags that have been added on top of the
|
|
|
|
|
base model for the current micro-architecture.
|
|
|
|
|
compilers (dict): compiler support to generate tuned code for this
|
|
|
|
|
micro-architecture. This dictionary has as keys names of
|
|
|
|
|
supported compilers, while values are list of dictionaries
|
|
|
|
|
with fields:
|
|
|
|
|
|
|
|
|
|
* name: name of the micro-architecture according to the
|
|
|
|
|
compiler. This is the name passed to the ``-march`` option
|
|
|
|
|
or similar. Not needed if the name is the same as that
|
|
|
|
|
passed in as argument above.
|
|
|
|
|
* versions: versions that support this micro-architecture.
|
|
|
|
|
|
2024-08-15 19:49:07 +02:00
|
|
|
generation (int): generation of the micro-architecture, if relevant.
|
|
|
|
|
cpu_part (str): cpu part of the architecture, if relevant.
|
2020-10-30 21:02:14 +01:00
|
|
|
"""
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
|
2024-08-15 19:49:07 +02:00
|
|
|
# pylint: disable=too-many-arguments,too-many-instance-attributes
|
2020-10-30 21:02:14 +01:00
|
|
|
#: Aliases for micro-architecture's features
|
|
|
|
|
feature_aliases = FEATURE_ALIASES
|
|
|
|
|
|
2024-08-15 19:49:07 +02:00
|
|
|
def __init__(self, name, parents, vendor, features, compilers, generation=0, cpu_part=""):
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
self.name = name
|
|
|
|
|
self.parents = parents
|
|
|
|
|
self.vendor = vendor
|
|
|
|
|
self.features = features
|
|
|
|
|
self.compilers = compilers
|
2024-08-15 19:49:07 +02:00
|
|
|
# Only relevant for PowerPC
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
self.generation = generation
|
2024-08-15 19:49:07 +02:00
|
|
|
# Only relevant for AArch64
|
|
|
|
|
self.cpu_part = cpu_part
|
2024-10-14 19:09:17 +02:00
|
|
|
|
|
|
|
|
# Cache the "ancestor" computation
|
2023-09-11 19:03:35 +02:00
|
|
|
self._ancestors = None
|
2024-10-14 19:09:17 +02:00
|
|
|
# Cache the "generic" computation
|
|
|
|
|
self._generic = None
|
|
|
|
|
# Cache the "family" computation
|
|
|
|
|
self._family = None
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
|
|
|
|
|
@property
|
|
|
|
|
def ancestors(self):
|
2020-10-30 21:02:14 +01:00
|
|
|
"""All the ancestors of this microarchitecture."""
|
2023-09-11 19:03:35 +02:00
|
|
|
if self._ancestors is None:
|
|
|
|
|
value = self.parents[:]
|
|
|
|
|
for parent in self.parents:
|
|
|
|
|
value.extend(a for a in parent.ancestors if a not in value)
|
|
|
|
|
self._ancestors = value
|
|
|
|
|
return self._ancestors
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
|
|
|
|
|
def _to_set(self):
|
|
|
|
|
"""Returns a set of the nodes in this microarchitecture DAG."""
|
|
|
|
|
# This function is used to implement subset semantics with
|
|
|
|
|
# comparison operators
|
|
|
|
|
return set([str(self)] + [str(x) for x in self.ancestors])
|
|
|
|
|
|
|
|
|
|
@coerce_target_names
|
|
|
|
|
def __eq__(self, other):
|
|
|
|
|
if not isinstance(other, Microarchitecture):
|
|
|
|
|
return NotImplemented
|
|
|
|
|
|
2020-10-30 21:02:14 +01:00
|
|
|
return (
|
|
|
|
|
self.name == other.name
|
|
|
|
|
and self.vendor == other.vendor
|
|
|
|
|
and self.features == other.features
|
2022-08-26 12:58:20 +02:00
|
|
|
and self.parents == other.parents # avoid ancestors here
|
2020-10-30 21:02:14 +01:00
|
|
|
and self.compilers == other.compilers
|
|
|
|
|
and self.generation == other.generation
|
2024-08-15 19:49:07 +02:00
|
|
|
and self.cpu_part == other.cpu_part
|
2020-10-30 21:02:14 +01:00
|
|
|
)
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
|
2024-09-21 14:05:41 +02:00
|
|
|
def __hash__(self):
|
|
|
|
|
return hash(self.name)
|
|
|
|
|
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
@coerce_target_names
|
|
|
|
|
def __ne__(self, other):
|
|
|
|
|
return not self == other
|
|
|
|
|
|
|
|
|
|
@coerce_target_names
|
|
|
|
|
def __lt__(self, other):
|
|
|
|
|
if not isinstance(other, Microarchitecture):
|
|
|
|
|
return NotImplemented
|
|
|
|
|
|
|
|
|
|
return self._to_set() < other._to_set()
|
|
|
|
|
|
|
|
|
|
@coerce_target_names
|
|
|
|
|
def __le__(self, other):
|
|
|
|
|
return (self == other) or (self < other)
|
|
|
|
|
|
|
|
|
|
@coerce_target_names
|
|
|
|
|
def __gt__(self, other):
|
|
|
|
|
if not isinstance(other, Microarchitecture):
|
|
|
|
|
return NotImplemented
|
|
|
|
|
|
|
|
|
|
return self._to_set() > other._to_set()
|
|
|
|
|
|
|
|
|
|
@coerce_target_names
|
|
|
|
|
def __ge__(self, other):
|
|
|
|
|
return (self == other) or (self > other)
|
|
|
|
|
|
|
|
|
|
def __repr__(self):
|
|
|
|
|
cls_name = self.__class__.__name__
|
2020-10-30 21:02:14 +01:00
|
|
|
fmt = (
|
|
|
|
|
cls_name + "({0.name!r}, {0.parents!r}, {0.vendor!r}, "
|
2024-08-15 19:49:07 +02:00
|
|
|
"{0.features!r}, {0.compilers!r}, generation={0.generation!r}, "
|
|
|
|
|
"cpu_part={0.cpu_part!r})"
|
2020-10-30 21:02:14 +01:00
|
|
|
)
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
return fmt.format(self)
|
|
|
|
|
|
|
|
|
|
def __str__(self):
|
|
|
|
|
return self.name
|
|
|
|
|
|
|
|
|
|
def __contains__(self, feature):
|
|
|
|
|
# Feature must be of a string type, so be defensive about that
|
2022-12-20 11:22:50 +01:00
|
|
|
if not isinstance(feature, str):
|
2020-10-30 21:02:14 +01:00
|
|
|
msg = "only objects of string types are accepted [got {0}]"
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
raise TypeError(msg.format(str(type(feature))))
|
|
|
|
|
|
|
|
|
|
# Here we look first in the raw features, and fall-back to
|
|
|
|
|
# feature aliases if not match was found
|
|
|
|
|
if feature in self.features:
|
|
|
|
|
return True
|
|
|
|
|
|
|
|
|
|
# Check if the alias is defined, if not it will return False
|
2020-10-30 21:02:14 +01:00
|
|
|
match_alias = Microarchitecture.feature_aliases.get(feature, lambda x: False)
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
return match_alias(self)
|
|
|
|
|
|
|
|
|
|
@property
|
|
|
|
|
def family(self):
|
|
|
|
|
"""Returns the architecture family a given target belongs to"""
|
2024-10-14 19:09:17 +02:00
|
|
|
if self._family is None:
|
|
|
|
|
roots = [x for x in [self] + self.ancestors if not x.ancestors]
|
|
|
|
|
msg = "a target is expected to belong to just one architecture family"
|
|
|
|
|
msg += f"[found {', '.join(str(x) for x in roots)}]"
|
|
|
|
|
assert len(roots) == 1, msg
|
|
|
|
|
self._family = roots.pop()
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
|
2024-10-14 19:09:17 +02:00
|
|
|
return self._family
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
|
2021-10-04 09:34:53 +02:00
|
|
|
@property
|
|
|
|
|
def generic(self):
|
|
|
|
|
"""Returns the best generic architecture that is compatible with self"""
|
2024-10-14 19:09:17 +02:00
|
|
|
if self._generic is None:
|
|
|
|
|
generics = [x for x in [self] + self.ancestors if x.vendor == "generic"]
|
|
|
|
|
self._generic = max(generics, key=lambda x: len(x.ancestors))
|
|
|
|
|
return self._generic
|
2021-10-04 09:34:53 +02:00
|
|
|
|
2024-03-12 09:31:15 +01:00
|
|
|
def to_dict(self):
|
|
|
|
|
"""Returns a dictionary representation of this object."""
|
|
|
|
|
return {
|
|
|
|
|
"name": str(self.name),
|
|
|
|
|
"vendor": str(self.vendor),
|
|
|
|
|
"features": sorted(str(x) for x in self.features),
|
|
|
|
|
"generation": self.generation,
|
|
|
|
|
"parents": [str(x) for x in self.parents],
|
|
|
|
|
"compilers": self.compilers,
|
2024-08-15 19:49:07 +02:00
|
|
|
"cpupart": self.cpu_part,
|
2024-03-12 09:31:15 +01:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
@staticmethod
|
|
|
|
|
def from_dict(data) -> "Microarchitecture":
|
|
|
|
|
"""Construct a microarchitecture from a dictionary representation."""
|
|
|
|
|
return Microarchitecture(
|
|
|
|
|
name=data["name"],
|
|
|
|
|
parents=[TARGETS[x] for x in data["parents"]],
|
|
|
|
|
vendor=data["vendor"],
|
|
|
|
|
features=set(data["features"]),
|
|
|
|
|
compilers=data.get("compilers", {}),
|
|
|
|
|
generation=data.get("generation", 0),
|
2024-08-15 19:49:07 +02:00
|
|
|
cpu_part=data.get("cpupart", ""),
|
2024-03-12 09:31:15 +01:00
|
|
|
)
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
|
|
|
|
|
def optimization_flags(self, compiler, version):
|
|
|
|
|
"""Returns a string containing the optimization flags that needs
|
|
|
|
|
to be used to produce code optimized for this micro-architecture.
|
|
|
|
|
|
2024-05-06 10:20:56 +02:00
|
|
|
The version is expected to be a string of dot separated digits.
|
|
|
|
|
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
If there is no information on the compiler passed as argument the
|
|
|
|
|
function returns an empty string. If it is known that the compiler
|
|
|
|
|
version we want to use does not support this architecture the function
|
|
|
|
|
raises an exception.
|
|
|
|
|
|
|
|
|
|
Args:
|
|
|
|
|
compiler (str): name of the compiler to be used
|
|
|
|
|
version (str): version of the compiler to be used
|
2024-05-06 10:20:56 +02:00
|
|
|
|
|
|
|
|
Raises:
|
|
|
|
|
UnsupportedMicroarchitecture: if the requested compiler does not support
|
|
|
|
|
this micro-architecture.
|
|
|
|
|
ValueError: if the version doesn't match the expected format
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
"""
|
2020-10-30 21:02:14 +01:00
|
|
|
# If we don't have information on compiler at all return an empty string
|
2020-06-25 18:18:48 +02:00
|
|
|
if compiler not in self.family.compilers:
|
2020-10-30 21:02:14 +01:00
|
|
|
return ""
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
|
2020-06-25 18:18:48 +02:00
|
|
|
# If we have information but it stops before this
|
|
|
|
|
# microarchitecture, fall back to the best known target
|
|
|
|
|
if compiler not in self.compilers:
|
2020-10-30 21:02:14 +01:00
|
|
|
best_target = [x for x in self.ancestors if compiler in x.compilers][0]
|
|
|
|
|
msg = (
|
|
|
|
|
"'{0}' compiler is known to optimize up to the '{1}'"
|
|
|
|
|
" microarchitecture in the '{2}' architecture family"
|
|
|
|
|
)
|
2020-06-25 18:18:48 +02:00
|
|
|
msg = msg.format(compiler, best_target, best_target.family)
|
|
|
|
|
raise UnsupportedMicroarchitecture(msg)
|
|
|
|
|
|
2024-05-06 10:20:56 +02:00
|
|
|
# Check that the version matches the expected format
|
|
|
|
|
if not re.match(r"^(?:\d+\.)*\d+$", version):
|
|
|
|
|
msg = (
|
|
|
|
|
"invalid format for the compiler version argument. "
|
|
|
|
|
"Only dot separated digits are allowed."
|
|
|
|
|
)
|
|
|
|
|
raise InvalidCompilerVersion(msg)
|
|
|
|
|
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
# If we have information on this compiler we need to check the
|
|
|
|
|
# version being used
|
|
|
|
|
compiler_info = self.compilers[compiler]
|
|
|
|
|
|
|
|
|
|
def satisfies_constraint(entry, version):
|
2020-10-30 21:02:14 +01:00
|
|
|
min_version, max_version = entry["versions"].split(":")
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
|
2020-10-30 21:02:14 +01:00
|
|
|
# Check version suffixes
|
2020-06-25 18:18:48 +02:00
|
|
|
min_version, _ = version_components(min_version)
|
|
|
|
|
max_version, _ = version_components(max_version)
|
|
|
|
|
version, _ = version_components(version)
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
|
|
|
|
|
# Assume compiler versions fit into semver
|
2020-10-30 21:02:14 +01:00
|
|
|
def tuplify(ver):
|
|
|
|
|
return tuple(int(y) for y in ver.split("."))
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
|
|
|
|
|
version = tuplify(version)
|
|
|
|
|
if min_version:
|
|
|
|
|
min_version = tuplify(min_version)
|
|
|
|
|
if min_version > version:
|
|
|
|
|
return False
|
|
|
|
|
|
|
|
|
|
if max_version:
|
|
|
|
|
max_version = tuplify(max_version)
|
|
|
|
|
if max_version < version:
|
|
|
|
|
return False
|
|
|
|
|
|
|
|
|
|
return True
|
|
|
|
|
|
|
|
|
|
for compiler_entry in compiler_info:
|
|
|
|
|
if satisfies_constraint(compiler_entry, version):
|
2020-10-30 21:02:14 +01:00
|
|
|
flags_fmt = compiler_entry["flags"]
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
# If there's no field name, use the name of the
|
|
|
|
|
# micro-architecture
|
2020-10-30 21:02:14 +01:00
|
|
|
compiler_entry.setdefault("name", self.name)
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
|
|
|
|
|
# Check if we need to emit a warning
|
2020-10-30 21:02:14 +01:00
|
|
|
warning_message = compiler_entry.get("warnings", None)
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
if warning_message:
|
|
|
|
|
warnings.warn(warning_message)
|
|
|
|
|
|
|
|
|
|
flags = flags_fmt.format(**compiler_entry)
|
|
|
|
|
return flags
|
|
|
|
|
|
2024-03-12 09:31:15 +01:00
|
|
|
msg = "cannot produce optimized binary for micro-architecture '{0}' with {1}@{2}"
|
2023-04-21 11:01:37 +02:00
|
|
|
if compiler_info:
|
|
|
|
|
versions = [x["versions"] for x in compiler_info]
|
|
|
|
|
msg += f' [supported compiler versions are {", ".join(versions)}]'
|
|
|
|
|
else:
|
|
|
|
|
msg += " [no supported compiler versions]"
|
|
|
|
|
msg = msg.format(self.name, compiler, version)
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
raise UnsupportedMicroarchitecture(msg)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
def generic_microarchitecture(name):
|
|
|
|
|
"""Returns a generic micro-architecture with no vendor and no features.
|
|
|
|
|
|
|
|
|
|
Args:
|
|
|
|
|
name (str): name of the micro-architecture
|
|
|
|
|
"""
|
2024-05-06 10:20:56 +02:00
|
|
|
return Microarchitecture(name, parents=[], vendor="generic", features=set(), compilers={})
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
|
|
|
|
|
|
2019-10-21 19:24:57 +02:00
|
|
|
def version_components(version):
|
|
|
|
|
"""Decomposes the version passed as input in version number and
|
|
|
|
|
suffix and returns them.
|
|
|
|
|
|
2020-10-30 21:02:14 +01:00
|
|
|
If the version number or the suffix are not present, an empty
|
2019-10-21 19:24:57 +02:00
|
|
|
string is returned.
|
|
|
|
|
|
|
|
|
|
Args:
|
|
|
|
|
version (str): version to be decomposed into its components
|
|
|
|
|
"""
|
2020-10-30 21:02:14 +01:00
|
|
|
match = re.match(r"([\d.]*)(-?)(.*)", str(version))
|
2019-10-21 19:24:57 +02:00
|
|
|
if not match:
|
2020-10-30 21:02:14 +01:00
|
|
|
return "", ""
|
2019-10-21 19:24:57 +02:00
|
|
|
|
|
|
|
|
version_number = match.group(1)
|
|
|
|
|
suffix = match.group(3)
|
|
|
|
|
|
|
|
|
|
return version_number, suffix
|
|
|
|
|
|
|
|
|
|
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
def _known_microarchitectures():
|
|
|
|
|
"""Returns a dictionary of the known micro-architectures. If the
|
|
|
|
|
current host platform is unknown adds it too as a generic target.
|
|
|
|
|
"""
|
|
|
|
|
|
|
|
|
|
def fill_target_from_dict(name, data, targets):
|
|
|
|
|
"""Recursively fills targets by adding the micro-architecture
|
|
|
|
|
passed as argument and all its ancestors.
|
|
|
|
|
|
|
|
|
|
Args:
|
|
|
|
|
name (str): micro-architecture to be added to targets.
|
|
|
|
|
data (dict): raw data loaded from JSON.
|
|
|
|
|
targets (dict): dictionary that maps micro-architecture names
|
|
|
|
|
to ``Microarchitecture`` objects
|
|
|
|
|
"""
|
|
|
|
|
values = data[name]
|
|
|
|
|
|
|
|
|
|
# Get direct parents of target
|
2020-10-30 21:02:14 +01:00
|
|
|
parent_names = values["from"]
|
|
|
|
|
for parent in parent_names:
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
# Recursively fill parents so they exist before we add them
|
2020-10-30 21:02:14 +01:00
|
|
|
if parent in targets:
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
continue
|
2020-10-30 21:02:14 +01:00
|
|
|
fill_target_from_dict(parent, data, targets)
|
|
|
|
|
parents = [targets.get(parent) for parent in parent_names]
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
|
2020-10-30 21:02:14 +01:00
|
|
|
vendor = values["vendor"]
|
|
|
|
|
features = set(values["features"])
|
|
|
|
|
compilers = values.get("compilers", {})
|
|
|
|
|
generation = values.get("generation", 0)
|
2024-08-15 19:49:07 +02:00
|
|
|
cpu_part = values.get("cpupart", "")
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
|
2024-08-15 19:49:07 +02:00
|
|
|
targets[name] = Microarchitecture(
|
|
|
|
|
name, parents, vendor, features, compilers, generation=generation, cpu_part=cpu_part
|
|
|
|
|
)
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
|
2020-10-30 21:02:14 +01:00
|
|
|
known_targets = {}
|
2025-05-21 11:25:02 +02:00
|
|
|
data = _vendoring.archspec.cpu.schema.TARGETS_JSON["microarchitectures"]
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
for name in data:
|
2020-10-30 21:02:14 +01:00
|
|
|
if name in known_targets:
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
# name was already brought in as ancestor to a target
|
|
|
|
|
continue
|
2020-10-30 21:02:14 +01:00
|
|
|
fill_target_from_dict(name, data, known_targets)
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
|
|
|
|
|
# Add the host platform if not present
|
|
|
|
|
host_platform = platform.machine()
|
2020-10-30 21:02:14 +01:00
|
|
|
known_targets.setdefault(host_platform, generic_microarchitecture(host_platform))
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
|
2020-10-30 21:02:14 +01:00
|
|
|
return known_targets
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
#: Dictionary of known micro-architectures
|
2020-10-30 21:02:14 +01:00
|
|
|
TARGETS = LazyDictionary(_known_microarchitectures)
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
|
|
|
|
|
|
2024-05-06 10:20:56 +02:00
|
|
|
class ArchspecError(Exception):
|
|
|
|
|
"""Base class for errors within archspec"""
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
class UnsupportedMicroarchitecture(ArchspecError, ValueError):
|
targets: Spack targets can now be fine-grained microarchitectures
Spack can now:
- label ppc64, ppc64le, x86_64, etc. builds with specific
microarchitecture-specific names, like 'haswell', 'skylake' or
'icelake'.
- detect the host architecture of a machine from /proc/cpuinfo or similar
tools.
- Understand which microarchitectures are compatible with which (for
binary reuse)
- Understand which compiler flags are needed (for GCC, so far) to build
binaries for particular microarchitectures.
All of this is managed through a JSON file (microarchitectures.json) that
contains detailed auto-detection, compiler flag, and compatibility
information for specific microarchitecture targets. The `llnl.util.cpu`
module implements a library that allows detection and comparison of
microarchitectures based on the data in this file.
The `target` part of Spack specs is now essentially a Microarchitecture
object, and Specs' targets can be compared for compatibility as well.
This allows us to label optimized binary packages at a granularity that
enables them to be reused on compatible machines. Previously, we only
knew that a package was built for x86_64, NOT which x86_64 machines it
was usable on.
Currently this feature supports Intel, Power, and AMD chips. Support for
ARM is forthcoming.
Specifics:
- Add microarchitectures.json with descriptions of architectures
- Relaxed semantic of compiler's "target" attribute. Before this change
the semantic to check if a compiler could be viable for a given target
was exact match. This made sense as the finest granularity of targets
was architecture families. As now we can target micro-architectures,
this commit changes the semantic by interpreting as the architecture
family what is stored in the compiler's "target" attribute. A compiler
is then a viable choice if the target being concretized belongs to the
same family. Similarly when a new compiler is detected the architecture
family is stored in the "target" attribute.
- Make Spack's `cc` compiler wrapper inject target-specific flags on the
command line
- Architecture concretization updated to use the same algorithm as
compiler concretization
- Micro-architecture features, vendor, generation etc. are included in
the package hash. Generic architectures, such as x86_64 or ppc64, are
still dumped using the name only.
- If the compiler for a target is not supported exit with an intelligible
error message. If the compiler support is unknown don't try to use
optimization flags.
- Support and define feature aliases (e.g., sse3 -> ssse3) in
microarchitectures.json and on Microarchitecture objects. Feature
aliases are defined in targets.json and map a name (the "alias") to a
list of rules that must be met for the test to be successful. The rules
that are available can be extended later using a decorator.
- Implement subset semantics for comparing microarchitectures (treat
microarchitectures as a partial order, i.e. (a < b), (a == b) and (b <
a) can all be false.
- Implement logic to automatically demote the default target if the
compiler being used is too old to optimize for it. Updated docs to make
this behavior explicit. This avoids surprising the user if the default
compiler is older than the host architecture.
This commit adds unit tests to verify the semantics of target ranges and
target lists in constraints. The implementation to allow target ranges
and lists is minimal and doesn't add any new type. A more careful
refactor that takes into account the type system might be due later.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
2019-06-19 15:47:07 +02:00
|
|
|
"""Raised if a compiler version does not support optimization for a given
|
|
|
|
|
micro-architecture.
|
|
|
|
|
"""
|
2024-05-06 10:20:56 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
class InvalidCompilerVersion(ArchspecError, ValueError):
|
|
|
|
|
"""Raised when an invalid format is used for compiler versions in archspec."""
|