* e4s cray rhel ci stack: re-enable and update for new cpe, should fix cray libsci issue
* only run e4s-cray-rhel stack
* Mkae Autotools build_system point at correct build_directory
* remove selective enable of cray-rhel stacks
* restore SPACK_CI_DISABLE_STACKS
* use dot prefix to hide cray-sles jobs instead of comment-out
---------
Co-authored-by: Ryan Krattiger <ryan.krattiger@kitware.com>
A few changes to tarball creation (for build caches):
- do not run file to distinguish binary from text
- file is slow, even when running it in a batched fashion -- it usually reads all bytes and has slow logic to categorize specific types
- we don't need a highly detailed file categorization; a crude categorization of elf, mach-o, text suffices.
detecting elf and mach-o is straightforward and cheap
- detecting utf-8 (and with that ascii) is highly accurate: false positive rate decays exponentially as file size increases. Further it's not only the most common encoding, but the most common file type in package prefixes.
iso-8859-1 is cheaply (but heuristically) detected too, and sufficiently accurate after binaries and utf-8 files are classified earlier
- remove file as a dependency of Spack in general, which makes Spack itself easier to install
- detect file type and need to relocate as part of creating the tarball, which is more cache friendly and thus faster
`kcov` was removed in Ubuntu 24.04, and it is no longer
installable via `apt` in our CI images. Instal it via
Linuxbrew instead, at least until it comes back to Ubuntu.
`subversion` is also not installed on ubuntu 24 by default,
so we have to install it manually.
- [x] Add linuxbrew to linux tests
- [x] Install `kcov` with brew
- [x] Install subversion with `apt`
Signed-off-by: Todd Gamblin <tgamblin@llnl.gov>
There are still more fix ups required for the missing libs to work as
expected in CI. Dropping the error requirement in favor of moving to a
log scraping method until we can verify all package issues have been
addressed correctly.
* Set the "build_jobs" on concretization/generate for CI
build_jobs also controls the concretization pool size. Set this
in the config section for CI generate.
This config is overwritten by build_job CI using the SPACK_BUILD_JOBS
environment variable. This implicitly will drop the default build
CPU request on all "default" grouped build jobs from (max) 16 to 8.
* Add default allocations for build jobs
* Add common jobs and concretize args to ci generate and rebuild
* CI: Specify parallel concretize and build jobs via argument
* Increase power and cray concretization limits
Lowering limits for these stacks creates timeout
* Increase default pool size to 8
intermittent timeouts with 4 CPU
* Add reduced requests for windows for now
This commit adds a config option `config:shared_linking:missing_library_policy:error/warn/ignore` which will cause installation errors or warnings when ELF executables or libraries need shared libraries which cannot be resolved from RPATH search paths. The default is to ignore.
This is a safeguard against accidentally linking to system libraries instead of Spack libraries. It makes it more likely that build cache installs work on different machines. It works only at the level of libraries, not at the level of symbols. Some system dependencies are allowed (e.g. kernel and libc).
Packages can (but are discouraged to) set `unresolved_libraries` to a list of patterns of sonames/library names that are know to be unresolvable in RPATHs. In the future this could be made more fine-grained in a non-breaking way by allowing a dictionary of patterns `lib => [deps]`.
Add missing encoding=utf-8 to various open calls. This makes
files like spec.json, spack.yaml, spack.lock, config.yaml etc locale
independent w.r.t. text encoding. In practice this is not often an
issue since Python 3.7, where the C locale is promoted to
C.UTF-8. But it's better to enforce UTF-8 explicitly, since there is
no guarantee text files are written in the right encoding.
Also avoid opening in text mode if it can be avoided.
* Python: deprecate 3.8
* Remove preference for EOL Python versions
* Explicitly deprecate things requiring EOL Python
* More deprecations
* deprecate old versions of slepc, py-petsc4py, py-slepc4py in sync with old versions of petsc
---------
Co-authored-by: Satish Balay <balay@mcs.anl.gov>
Reorganize the pipeline generation aspect of the ci module,
mostly to separate the representation, generation, and
pruning of pipeline graphs from platform-specific output
formatting.
Introduce a pipeline generation registry to support generating
pipelines for other platforms, though gitlab is still the only
supported format currently.
Fix a long-existing bug in pipeline pruning where only direct
dependencies were added to any nodes dependency list.
* Set the "build_jobs" on concretization/generate for CI
build_jobs also controls the concretization pool size. Set this
in the config section for CI generate.
This config is overwritten by build_job CI using the SPACK_BUILD_JOBS
environment variable. This implicitly will drop the default build
CPU request on all "default" grouped build jobs from (max) 16 to 8.
* Add default allocations for build jobs
* Add common jobs and concretize args to ci generate and rebuild
* CI: Specify parallel concretize and build jobs via argument
* Increase power and cray concretization limits
Lowering limits for these stacks creates timeout
* gromacs: announce deprecation policy and start to implement
* Style it up
* [@spackbot] updating style on behalf of mabraham
* Bump versions used in CI
---------
Co-authored-by: mabraham <mabraham@users.noreply.github.com>
* Visit: Add new versions 3.4.0 and 3.4.1
* Adios2: Restrict python, 3.11 doesn't not work for older Adios2
* VisIt: Set the VTK_VERSION for @3.4:
Older versions of VTK used the VTK_{MAJOR, MINOR}_VERSION variables for
VTK detection. VisIt >= 3.4 uses the full string VTK_VERSION.
* CI: Don't build llvm-amdgpu for non-HIP stack
* VisIt: v3.4.1 handles newer Adios2 correctly
* Visit: Add missing links in HDF5, set correct VTK version configuration parameter
* VisIt: Add py-pip requirement and patch visit with configuration changes
* HDF5 symlinks move when inside of callback
* VisIt ninja install fails with python module. Using make does not
* VisIt 3.4 has a high minimum cmake requirement
* HDF5: Early return when not mpi for mpi symlinks
* HDF5: Use platform agnostic method for creating legacy compatible MPI symlinks
* Fix VISIT_VTK_VERSION handling for 8.2.1a hack
`spack mirror add` and `set` now have flags `--oci-password-variable`, `--oci-password-variable`, `--s3-access-key-id-variable`, `--s3-access-key-secret-variable`, `--s3-access-token-variable`, which allows users to specify an environment variable in which a username or password is stored.
Storing plain text passwords in config files is considered deprecated.
The schema for mirrors.yaml has changed, notably the `access_pair` list is generally replaced with a dictionary of `{id: ..., secret_variable: ...}` or `{id_variable: ..., secret_variable: ...}`.
This PR adds a sub-command to `spack env` (`track`) which allows users to add/link
anonymous environments into their installation as named environments. This allows
users to more easily track their installed packages and the environments they're
dependencies of. For example, with the addition of #41731 it's now easier to remove
all packages not required by any environments with,
```
spack gc -bE
```
#### Usage
```
spack env track /path/to/env
==> Linked environment in /path/to/env
==> You can activate this environment with:
==> spack env activate env
```
By default `track /path/to/env` will use the last directory in the path as the name of
the environment. However users may customize the name of the linked environment
with `-n | --name`. Shown below.
```
spack env track /path/to/env --name foo
==> Tracking environment in /path/to/env
==> You can activate this environment with:
==> spack env activate foo
```
When removing a linked environment, Spack will remove the link to the environment
but will keep the structure of the environment within the directory. This will allow
users to remove a linked environment from their installation without deleting it from
a shared repository.
There is a `spack env untrack` command that can be used to *only* untrack a tracked
environment -- it will fail if it is used on a managed environment. Users can also use
`spack env remove` to untrack an environment.
This allows users to continue to share environments in git repositories while also having
the dependencies of those environments be remembered by Spack.
---------
Co-authored-by: Todd Gamblin <tgamblin@llnl.gov>
Set command line scopes last in _main, so they are higher scopes
Restore the global configuration in a spawned process by inspecting
the result of ctx.get_start_method()
Add the ability to pass a mp.context to PackageInstallContext.
Add shell-tests to check overriding the configuration:
- Using both -c and -C from command line
- With and without an environment active
