* [mfem] A few updates: add 'strumpack' variant; add 'zlib'
variant (same as 'gzstream'); fix optmization flag
for v4.0.
* [mfem] flake8 fix
* [mfem] Add version 4.1
* [mfem] Add/tweak some 'conflicts' directives.
* [gslib] Add new release versions + 'develop' version.
* [petsc] Restrict hdf5 version to <= 1.10.99 since 1.12.0 fails
* [metis] Use the original metis url for v4.0.3.
* [conduit] Remove restrictions to the used hdf5 variant to allow
building with other packages that use hdf5, e.g. petsc.
* [mfem] Few updates:
* Replace the 'gzstream' variant with 'zlib' variant.
* Do not add system library paths with -L flags.
* Allow '+pumi+shared' variant.
* Update the 'test_builds.sh' script.
* [occa] Add version 1.0.9.
* [mfem] Some OCCA and RAJA updates.
* [gslib] Fix the build for new versions of the library.
* [mfem] Add 'gslib' variant for GSLIB.
* [mfem] Add 'cuda' variant.
* [mfem] Add 'libceed' variant + a few more tweaks.
* [mfem] Add 'umpire' variant.
* [ceed] Add a draft for v3.0. Not tested. Just made sure that
concretization works for 'ceed' and 'ceed+cuda'.
* [nek] Fix Nek5000/NekCEM
* [nek] Add Nek5000-v19 & polishing Nek packages
* [flake8] Fix flake8 failure
* petsc: use of HDF5 does not care about +hl+fortran
* [petsc] Temporarily allow any hypre version with petsc@develop.
[ceed] Remove the requirement for hypre@develop.
* [libceed] Do not explicitly set NVCCFLAGS for v0.5 and later.
* [laghos] Add version 3.0, pointing to dev branch for now.
Do not set CXX at the make command line.
Simplify the dependecy directives a little.
[ceed] Use laghos v3.0 for ceed v3.0.0.
* [laghos] Keep the injection of CXX in the makefile for laghos
versions <= 2.0.
* [nekcem] Recovert hash-versions used by older versions of the
'ceed' package.
* [occa] Disable hip autodetection because it fails on some machines.
* [laghos] Update v3.0 with the actual release source.
* [suite-sparse] Explicitly add the c11 flag to CFLAGS.
* Update package.py (#15749)
* [magma] Add forgotten specification of the 'cuda_arch' variant.
* [ceed] Use magma v2.5.3 for ceed v3.0.
* libceed-0.6
* mfem: depend on libceed 0.6:, not 0.6.0:
* [libceed] Add 'magma' variant -- enable MAGMA backend.
* [ceed] In v3.0, use '+magma' variant of libceed when cuda is enabled.
* Initial package for Remhos (needs to be updated with actual sha256
* Adding Remhos to CEED-3.0, for now @develop
* petsc: add 3.13.0 (using petsc-lite) and 3.12.5
* ceed: update to petsc@3.13.0:3.13.99
* Temporary fix
* [nekcem] Add hash-version for ceed v3.0.
* [nek5000] Simplify source urls.
* [nektools] Use the same sources and versions as in nek5000.
* [ceed] Update Nek-related package versions.
* libceed: add v0.6 portabilty fix
* libceed: better v0.6 portabilty fix
* Adding Remhos 1.0 release in CEED-3.0
* Updating hash for Remhos-1.0
* [petsc] Add cuda variant.
* [libceed] Flake8 fix.
* [petsc] Add cuda variant.
* [ceed] Fix the OCCA version to 1.0.9. Enable petsc+cuda when
compiling ceed@3.0.0+cuda.
* nek5000: fix python 2.7+ syntax
* [laghos] Fix testing.
* [remhos] Fix testing.
* [remhos] For testing use the 'tests' target instead of 'test'.
* Add/update the maintainers for ceed, libceed, mfem, laghos, and remhos.
* [ceed] Remove unnecessary dependencies.
* libceed: activate AVX when supported
Co-authored-by: Thilina Rathnayake <thilinarmtb@gmail.com>
Co-authored-by: Jed Brown <jed@jedbrown.org>
Co-authored-by: Stan Tomov <tomov@eecs.utk.edu>
Co-authored-by: Tzanio <tzanio@llnl.gov>
We'd like to use a consistent checksum scheme everywhere so that we can:
a) incorporate archive checksums into our specs and have a
consistent hashing algorithm across all specs.
b) index mirrors with a consistent type of checksum, and not one that
is dependent on how spack packages are written.
- [x] convert existing md5, sha224, sha512, sha1 checksums to sha256
* Initial commit for v2.0 of the CEED software suite.
* Update Nek packages and gslib
* Help spack concretize the hypre version for ceed-2.0.
* Fix nekcem install error
* Add support for gfortran v8 in nek5000 and nekcem.
* Split Nek5000 into Nek5000 and Nektools
* Get Nektools to build fine in Theta
* Fix travis failure: remove unused 'import numbers' from nek5000.
* Check for gfortran if it is wrapped
* Tweak the detection of gfortran in nek5000.
* Fix Nek packages to add -std=legacy when FC=gcc
* spack install ceed~petsc works fine on Theta
* Fix flake8 errors
* Fix more flake8 tests
* Fix an import issue
* Tweak the suite-sparse package to avoid interaction with existing system
installations of suite-sparse.
* petsc: update superlu-dist dependency
* Updates in the packages: occa, libceed, and ceed.
* In the libceed package, explicitly tell nvcc which host compiler to use.
* Fix python formatting.
* Simplify the test for gfortran in nek* packages.
* ceed: 2.0 uses petsc@3.11.0
* hpgmg-0.4; use from ceed@2.0.0
* Update the hypre dependency for ceed 2.0.
* Disable the superlu-dist dependency (through hypre) when using a
+quickbuild of ceed 2.0.
* petsc-3.11.0: add xlf fix
* nekcem: has a build dependency on Python 2.7+
* hpgmg: better setting of compiler options and use python for configure
* libceed: use v0.4 tag
* libceed: fix 0.4 release oops (pkgconfig version)
* Add a patch for magma-2.5.0 that brings it up the current 'master'.
* In the mfem package, install the examples, miniapps, and data under
$prefix/share/mfem.
* In the magma package, apply a patch to v2.5.0 that disables
magma_sparse - for testing purposes.
* In the magma package, link the 'magma' library with the
'nvToolsExt' library.
* In the magma package, update the 'magma-2.5.0.patch' with the latest
commits from the magma source repository. Also, remove the library
'nvToolsExt' from the 'magma-2.5.0-cmake.patch' - now it is not
needed.
* In the magma package, disable OpenMP when using v2.5.0 with the
IBM XL compiler.
Please enter the commit message for your changes. Lines starting
* In the mfem package, add version for the 'laghos-v2.0' tag; also,
prefix the versions `laghos-v*` with their respective development
version numbers -- this way they are properly ordered within spack
relative to the official numbered versions.
* petsc: add version 3.11.1 (#11179)
(cherry picked from commit 1eab6e3c86)
* ceed-2.0: use petsc-3.11.1
* this-is-so-dumb.f -> empty.f
- remove the old LGPL license headers from all files in Spack
- add SPDX headers to all files
- core and most packages are (Apache-2.0 OR MIT)
- a very small number of remaining packages are LGPL-2.1-only
* petsc: remove dependency on boost - its required only as a dependency on trilinos
Also set COPTFLAGS='' etc - this way CFLAGS is the primary way optimization flags are set by spack
* petsc: update pkgs with petsc~boost dependency
* fix flake8
* boost is optional for trilinos - so adjust petsc dependency on boost [via trilinos] accordingly
* do not add boost dependency on petsc [due to trilinos requirement]. Trilinos adds this dependency anyway.
* ceed bundle package including OCCA, MAGMA, Nek5000, mfem, and PETSc
Very preliminary, a lot of ad hoc decisions, fragile, missing functionality
All packages do build on my MacOS laptop with Cuda
Funded-by: ECP
Project: CEED
Time: 4 hours
Reported-by: Tzanio Kolev <kolev1@llnl.gov>
* Some adjustments in a few CEED-related packages.
This is still very preliminary, but with these changes I'm able to build from
scratch on a Mac laptop and a Linux desktop (RHEL7).
Note that there doesn't seem to be a good way to support CUDA in Spack, so
you'll have to install that manually yourself. You will also need a Fortran
compiler, in particular on a Mac where you also have to make sure that it
is being picked up in ~/.spack/darwin/compilers.yaml.
* ceed bundle package including OCCA, MAGMA, Nek5000, mfem, and PETSc
Very preliminary, a lot of ad hoc decisions, fragile, missing functionality
All packages do build on my MacOS laptop with Cuda
Funded-by: ECP
Project: CEED
Time: 4 hours
Reported-by: Tzanio Kolev <kolev1@llnl.gov>
* Reverting Mac-related CUDA checks in the OCCA and MAGMA packages.
A much better solution is to install CUDA manually and add it to
~/.spack/darwin/packages.yaml:
packages:
cuda:
paths:
cuda@8.0.54: /usr/local/cuda
* Fix flake8 warnings
Funded-by: CEED
Project: CEED/Spack
* remove unneeded commented out code
Funded-by: CEED
Project: CEED/Spack
* Don't have PETSc use MUMPS to speedup install time, try parallel installs for Magma
Funded-by: CEED
Project: CEED/Spack
* Added libceed package and made changes to get the ceed metapackage up and running.
* Get the ceed package up and running and added installing the .h file in the libceed package.
* All packages are now pointed at specific versions (either tagged or git hashed.
* Changed some of the specific versions in the CEED metapackage.
* Some version updates.
* Applied Cameron Smith's patch for the latest pumi.
* Merge
* Nek5000: Use tarball instead of git tag
* Major update of the mfem package - needs more testing. Add a testing
shell script for mfem, test_builds.sh, in the mfem directory. It builds
a number of mfem configurations to ensure they all work.
Add 'suite-sparse' variant to petsc.
Add 'develop' version of libceed.
Add 'metis' variant of laghos.
Update the dependencies of ceed.
* Changes in petsc's handling of zlib to make the latest build work on Mac.
* [MFEM] When using '+libunwind', mfem needs '-ldl'.
* [OCCA] Remove debug print statements.
* [PETSc] Replace the check ('zlib' in spec) with ('+zlib' in spec) - the
latter checks if 'zlib' variant of petsc is enabled which is incorrect;
the former checks if petsc is configured to depend on 'zlib'.
* [MFEM] Add conduit variant.
* [libCEED] Enable testing using 'make prove'.
* [MFEM] Tweak test_builds.sh - all builds pass on fedora 27.
* Add a post install test
* Add a post installation check for NekCEM
* pumi: bump git hash, remove unused patch
* Fixed testing of Laghos package
* Adding variants in CEED package
* Empty file for URL didn't work on LLNL/LC. Replacing with bundle-package.txt -> README.md.
* [MFEM] If the spec defines the 'cxxflags' compiler flags, use that value
to set the CXXFLAGS value in the mfem build system.
* Disabling HDF5 by default.
You can still build it with "spack install ceed+hdf5".
* libceed: fix use of prefix versus DESTDIR
* Added cuda variant for libCEED (off by default)
* [libCEED] When building v0.1, fix ceed.pc before installing it.
* [CEED] Add variants for OCCA and PUMI. Replace the hdf5 variant with
a variant called quickbuild that disables variants in packages to
speedup the build - currently hdf5, boost, and superlu-dist in PETSc.
* [libCEED] Remove unused 'import os'.
* [MAGMA] Add version 2.3.0.
* [OCCA] Major update of occa/package.py.
* [libCEED] Several improvements.
* [CEED] Use fixed versions for occa and libceed.
* [OCCA] Fix a bug in CUDA setup.
* NekCEM doesn't need depends_on('python')
* [OCCA,libCEED,MFEM,CEED] Update occa and libceed versions plus a few
tweaks in occa and mfem.
* Switching to gslib-1.0.2 to fix summitdev bug.
* [Nek5000] Use the Fortran 77 compiler instead of the 'fc' compiler.
Propagate any 'fflags' and 'cflags' specifications to the Nek tools.
* [MFEM] Tweak for 'ppc64le'.
* attempt to override fips compatibility error for md5
* Compiler option changes in libCEED to fix summitdev build.
* Disable the nekcem install test until it can be fixed.
* [NekCEM] Major update of the package to fix various issues.
* [NekCEM] Fix formatting
* zoltan: remove non-portable -g0 flag
the pgi compiler does not accept it
* pumi: specify dependency on cmake > 3
* [Nek5000] Add dependency on libx11 when needed. Various hacks to
support IBM XL compilers.
* [NekCEM] Link with the pthreads library - it is required.
* [MAGMA] Add a patch for magma v2.3.0 when building with gcc <= 4.8.
Add dependency on BLAS.
* [CEED] Update to magma 2.3.0. When building with gcc < 4.9 constrain
the used suite-sparse version to <= 5.1.0 - starting with v5.2.0,
suite-sparse requires gcc >= 4.9.
* Small updates
* [libceed, gslib] Fix style
* [Nek5000] Need 'libxt' as a dependency as well.
* [MUMPS] Temporary workaround for ray.
* Updating occa and libceed to laters pre-1.0.0 and pre-0.2 hashes
* petsc: add pkg-config patch for variable quoting
Variable definitions in pkg-config are processed more like make than a
shell, so don't need quoting. Older versions of pkg-config (<= 0.28)
did not remove the quotes when printing the value.
Freedesktop #67904 (https://bugs.freedesktop.org/show_bug.cgi?id=67904)
Reported-by: Tzanio Kolev <kolev1@llnl.gov>
* petsc: add 3.8.4 and myself as co-maintainer
* Updating libceed to latest pre-0.2 hash.
* [PETSc] Add the 'headers' and 'libs' properties.
* [MFEM] Explicitly add rpaths to link flags for external packages.
This is necessary when MFEM's exported options (in config.mk) are
used outside of Spack for linking against MFEM.
* Unset MFEM_DIR before building MFEM
* [PETSc] As observed by @jedbrown, there is no need to define the 'libs'
property explicitly - the default handler works fine too.
* Build MAGMA shared by default, install a few additional headers
* Forgot a self
* Switching to OCCA tag v1.0.0-alpha.4.
Adding urls for OCCA and libCEED ('spack uninstall' complains otherwise).
* Removed FIXMEs for OCCA tag
* [occa] Cleaned up tagged versions
* [libceed] Updated occa to v1.0.0-alpha.5
* [ceed] Updated occa to v1.0.0-alpha.5
* [libCEED] Always define the 'NDEBUG' makefile option based on the
'debug' variant setting - this should always work regardless of the
default setting inside the libceed makefile.
* [MUMPS] Revert a temporary workaround.
* [CEED, libCEED] Minor tweaks.
* libCEED v0.2 release
* [CEED] Use version 0.2 of libCEED.
* [HPGMG] Remove duplicate version.
* [CEED] Update the hpgmg version
* hpgmg: use tarball for 0.3
The Git repository contains somewhat heavy documentation so the tarballs
are much faster.
* hpgmg: +fe was default for the 0.3 release
* hpgmg: explicitly name build directory to avoid use of ambient PETSC_ARCH
* [HPGMG] Fix flake8 formatting
* libceed@0.2: work around occaFree issue
