Modifications:
- [x] Move `spack.util.string` to `llnl.string`
- [x] Remove dependency of `llnl` on `spack.error`
- [x] Move path of `spack.util.path` to `llnl.path`
- [x] Move `spack.util.environment.get_host_*` to `spack.spec`
This reapplies 66f7540, which adds supports for hardlinks/junctions on
Windows systems where developer mode is not enabled.
The commit was reverted on account of multiple issues:
* Checks added to prevent dangling symlinks were interfering with
existing CI builds on Linux (i.e. builds that otherwise succeed were
failing for creating dangling symlinks).
* The logic also updated symlinking to perform redirection of relative
paths, which lead to malformed symlinks.
This commit fixes these issues.
* When installing a package Spack will attempt to set group permissions on
the install prefix even when the configuration does not specify a group.
Co-authored-by: David Gomez <dvdgomez@users.noreply.github.com>
* Support hardlinks/junctions on Windows systems without developer
mode enabled
* Generally, use of llnl.util.symlink.symlink is preferred over
os.symlink since it handles this automatically
* Generally an error is now reported if a user attempts to create a
symlink to a file that does not exist (this was previously allowed
on Linux/Mac).
* One exception to this: when Spack installs files from the source
into their final prefix, dangling symlinks are allowed (on
Linux/Mac - Windows does not allow this in any circumstance).
The intent behind this is to avoid generating failures for
installations on Linux/Mac that were succeeding before.
* Because Windows is strict about forbidding dangling symlinks,
`traverse_tree` has been updated to skip creating symlinks if they
would point to a file that is ignored. This check is not
transitive (i.e., a symlink to a symlink to an ignored file would
not be caught appropriately)
* Relocate function: resolve_link_target_relative_to_the_link
(this is not otherwise modified)
Co-authored-by: jamessmillie <smillie@txcorp.com>
Add a `find_first` method that locates one instance of a file
that matches a specified pattern by recursively searching a directory
tree. Unlike other `find` methods, this only locates one file at most,
so can use optimizations that avoid searching the entire tree:
Typically the relevant files are at low depth, so it makes sense to
locate files through iterative deepening and early exit.
In the Windows filesystem logic for creating a symlink, we intend to
fall back to a copy when the symlink cannot be created (for some
configuration settings on Windows it is not possible for the user
to create a symlink). It turns out we were overly-broad in which
exceptions lead to this fallback, and the subsequent copy would
also fail: at least one case where this occurred is when we
attempted to create a symlink that already existed.
The updated logic expressly avoids falling back to a copy when the
file/symlink already exists.
`mypy` only understands `sys.platform == "win32"`, not indirect assignments of that
value to things like `is_windows`. If we don't use the accepted platform checks, `mypy`
registers many Windows-only symbols as not present on Linux, when it should skip the
checks for platform-specific code.
The checksum exception was not detailed enough and not reraised when using cache only, resulting in useless error messages.
Now it dumps the file path, expected
hash, computed hash, and the downloaded file summary.
* Style: black 23, skip magic trailing commas
* isort should use same line length as black
* Fix unused import
* Update version of black used in CI
* Update new packages
* Update new packages
This PR enables the successful execution of the spack binary cache
tutorial on Windows. It assumes gnupg and file are available (they
can be installed with choco).
* Fix handling of args with quotes in spack.bat
* `file` utility can be installed on Windows (e.g. with choco): update
error message accordingly
Since we dropped support for Python 2.7, we can embrace using keyword only arguments
for many functions in Spack that use **kwargs in the function signature. Here this is done
for the llnl.util.filesystem module.
There were a couple of bugs lurking in the code related to typo-like errors when retrieving
from kwargs. Those have been fixed as well.
Unit tests on Windows are supposed to pass for any PR to pass CI.
However, the return code for the unit test command was not being
checked, which meant this check was always passing (effectively
disabled). This PR
* Properly checks the result of the unit tests and fails if the
unit tests fail
* Fixes (or disables on Windows) a number of tests which have
"drifted" out of support on Windows since this check was
effectively disabled
* Remove CI jobs related to Python 2.7
* Remove Python 2.7 specific code from Spack core
* Remove externals for Python 2 only
* Remove llnl.util.compat
Spack currently creates a temporary sbang that is moved "atomically" in place,
but this temporary causes races when multiple processes start installing sbang.
Let's just stick to an idempotent approach. Notice that we only re-install sbang
if Spack updates it (since we do file compare), and sbang was only touched
18 times in the past 6 years, whereas we hit the sbang tempfile issue
frequently with parallel install on a fresh spack instance in CI.
Also fixes a bug where permissions weren't updated if config changed but
the latest version of the sbang file was already installed.
Fixes an issue on the RHEL8 UBI container where this test would fail because `gr_mem`
was empty for every entry in the `grp` DB.
You have to check *both* the `pwd` database (which has primary groups) and `grp` (which
has other gorups) to do this correctly.
- [x] update `llnl.util.filesystem.group_ids()` to do this
- [x] use it in the `sbang` test
Changes to improve locating shared libraries on Windows, which in
turn enables the use of Clingo. This PR attempts to establish a
proper distinction between linking on Windows vs. Linux/Mac: on
Windows, linking is always done with .lib files (never .dll files).
This somewhat complicates the model since the Spec.lib method could
return libraries that were used for both linking and loading, but
since these are not always the same on Windows, it was decided to
treat Spec.libs as being for link-time libraries. Additional functions
are added to help dependents locate run-time libraries.
* Clingo is now the default concretizer on Windows
* Clingo is now the concretizer used for unit tests on Windows
* Fix a permissions issue that can occur while moving Git files during
fetching/staging
* Packages can now implement "win_add_library_dependent" to register
files/directories that include libraries that would need to link
to dependency dlls
* Packages can now implement "win_add_rpath" to register the locations
of dlls that dependents would want to load
* "Spec.libs" on Windows is updated to return link-time libraries
(i.e. .lib files, rather than .dll files)
* PackageBase.rpath on Windows is now updated to return the most-likely
locations where .dlls will be found (which is generally in the bin/
directory)
* filter_file: introduce argument 'start_at'
* autotools: extend patching of the libtool script
* autotools: refactor _patch_usr_bin_file
* autotools: improve readability of the filtering
* autotools: keep the modification time of the configure scripts
* autotools: do not try to patch directories
* autotools: explain libtool patching for posterity
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
Co-authored-by: Harmen Stoppels <harmenstoppels@gmail.com>
Spack currently depends on parsing filenames of downloaded files to
determine what type of archive they are and how to decompress them.
This commit adds a preliminary check based on magic numbers to
determine archive type (but falls back on name parsing if the
extension type cannot be determined).
As part of this work, this commit also enables decompression of
.tar.xz-compressed archives on Windows.
53a7b49 created a reference error which broke `.libs` (and
`find_libraries`) for many packages. This fixes the reference
error and improves the testing for `find_libraries` by actually
checking the extension types of libraries that are retrieved by
the function.
Add a post-install step which runs (only) on Windows to modify an
install prefix, adding symlinks to all dependency libraries.
Windows does not have the same concept of RPATHs as Linux, but when
resolving symbols will check the local directory for dependency
libraries; by placing a symlink to each dependency library in the
directory with the library that needs it, the package can then
use all Spack-built dependencies.
Note:
* This collects dependency libraries based on Package.rpath, which
includes only direct link dependencies
* There is no examination of libraries to check what dependencies
they require, so all libraries of dependencies are symlinked
into any directory of the package which contains libraries
* filesystem: use lstat in recursive mtime
When a `develop` path contains a dead symlink, the `os.stat` in the recursive `mtime` determination trips up over it.
Closes#32165.
Most package installations include compressed source files. This
adds support for common archive types on Windows:
* Add support for using system 7zip functionality to decompress .Z
files when available (and on Windows, use 7zip for .xz archives)
* Default to using built-in Python support for tar/bz2 decompression
(note that Python tar documentation mentions preservation of file
permissions)
* Add tests for decompression support
* Extract logic for handling exploding archives (i.e. compressed
archives that expand to more than one base file) into an
exploding_archive_catch context manager in the filesystem module
Fixes missing chgrp on symlinks in package installations, and errors on
symlinks referencing non-existent or non-writable locations.
Note: `os.chown(.., follow_symlinks=False)` is python3 only, but
`os.lchown` exists in both versions.
When running on Windows, Spack may generate files in the stage/install
prefixes that do not have write permissions, which prevents the
removal of those directories (e.g. when cleaning stages or uninstalling).
There should be a refactoring to avoid this in the first place, but that
is assumed to be longer term, so the temporary fix is to make such files
writable if they are not. This PR:
* Automatically handles these permissions errors when uninstalling
packages from the Spack root (makes then writable)
* Updates similar already-existing logic when removing Spack-managed
stage directories (the error-handling was assuming all errors were
permissions errors and was therefore handling other errors
inappropriately)
Note: these permissions issues only appear on Windows so this logic is
only applied there (permissions are not modified for this purpose on
Linux etc.).
This also adds special handling for a case where calling `isdir`
on an `os.DirEntry` object would fail for improperly-created symlinks
(e.g. on Windows, using `os.symlink` without `target_is_directory=True`).
Note this specific issue only came up when enabling link_tree tests
(specifically `source_merge_visitor_cant_be_cyclical`).
Added support for finding the OpenCV package via the find external
command. Included support for identifying variants based on available
shared libraries.
Added support to finding the OpenBLAS package via the find external
command.
Enabled packages to show that they can be discovered via the find
external command in the info message.
Updated the OpenCV and OpenBLAS packages to use the extensible search
mechanism for library extensions on multiple OS platforms.
Corrected how find externals works on Darwin for OpenCV and OpenBLAS
to accommodate that the version numbers are placed before the file
extension instead of after it, as on Linux.
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
I tried to use --overwrite on nvhpc, but nvhpc's install size is 16GB. Seems
better to do os.rename in the same directory than moving the directory to
`/tmp`.
- [x] install --overwrite: use rename instead of tmpdir
- [x] use tempfile
Update "spack external find --all" to also find library-only packages.
A Package can add a ".libraries" attribute, which is a list of regular
expressions to use to find libraries associated with the Package.
"spack external find --all" will search LD_LIBRARY_PATH for potential
libraries.
This PR adds examples for NCCL, RCCL, and hipblas packages. These
examples specify the suffix ".so" for the regular expressions used
to find libraries, so generally are only useful for detecting library
packages on Linux.
We shouldn't be using "remove_linked_tree" to remove the lock file,
since that function expects to receive a directory path as an
argument.
Also, as a further measure to avoid regression, this commit restores
the "ignore_errors=True" argument on linux and adds a unit test
checking that "remove_linked_tree" doesn't change file permissions
as a side effect of a failure to remove.
Reduces the number of stat calls to a bare minimum:
- Single pass over src prefixes
- Handle projection clashes in memory
Symlinked directories in the src prefixes are now conditionally
transformed into directories with symlinks in the dst dir. Notably
`intel-mkl`, `cuda` and `qt` has top-level symlinked directories that
previously resulted in empty directories in the view. We now avoid
cycles and possible exponential blowup by only expanding symlinks that:
- point to dirs deeper in the folder structure;
- are a fixed depth of 2.
`file` was used to detect Python scripts with shebangs, so that the interpreter could be changed from <python prefix> to <view path>. With this change, we detect shebangs using Python instead, so that `file` is no longer required.
Consolidate Spack's internal filepath logic to a select
few places and refactor to consistent internal useage of
os.path utilities. Creates a prefix, and a series of utilities
in the path utility module that facilitate handling paths
in a platform agnostic manner.
Convert Windows paths to posix paths internally
Prefer posixpath.join instead of os.path.join
Updated util/ directory to account for Windows integration
Co-authored-by: Stephen Crowell <stephen.crowell@khq.kitware.com>
Co-authored-by: John Parent <john.parent@kitware.com>
Module template format for windows (#23041)
* Incorporate new search location
* Add external user option
* proper doc string
* Explicit commands in getting started
* raise during chgrp on Win
recover installer changes
Notate admin privleges
Windows phase install hooks
Find external python and install ninja (#23496)
Allow external find python to find windows python and spack install ninja
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Betsy McPhail <betsy.mcphail@kitware.com>
To provide Windows-compatible functionality, spack code should use
llnl.util.symlink instead of os.symlink. On non-Windows platforms
and on Windows where supported, os.symlink will still be used.
Use junctions when symlinks aren't supported on Windows (#22583)
Support islink for junctions (#24182)
Windows: Update llnl/util/filesystem
* Use '/' as path separator on Windows.
* Recognizing that Windows paths start with '<Letter>:/' instead of '/'
Co-authored-by: lou.lawrence@kitware.com <lou.lawrence@kitware.com>
Co-authored-by: John Parent <john.parent@kitware.com>
os.rename() fails on Windows if file already exists.
Create getuid utility function (#21736)
On Windows, replace os.getuid with ctypes.windll.shell32.IsUserAnAdmin().
Tests: Use getuid util function
Co-authored-by: lou.lawrence@kitware.com <lou.lawrence@kitware.com>
Co-authored-by: Betsy McPhail <betsy.mcphail@kitware.com>
