fixes#22351
The ASP-based solver now accounts for the presence
in the DAG of deprecated versions and tries to minimize
their number at highest priority.
Variants explicitly set in an abstract root spec are considered
as defaults for the package they refer to, and they override
what is in packages.yaml and in package.py. This is relevant
only for multi-valued variants, where a constraint may extend
an already default value.
fixes#22565
This change enforces the uniqueness of the version_weight
atom per node(Package) in the DAG. It does so by applying
FTSE and adding an extra layer of indirection with the
possible_version_weight/2 atom.
Before this change it may have happened that for the same
node two different version_weight/2 were in the answer set,
each of which referred to a different spec with the same
version, and their weights would sum up.
This lead to unexpected result like preferring to build a
new version of an external if the external version was
older.
* ASP-based solver: avoid adding values to variants when they're set
fixes#22533fixes#21911
Added a rule that prevents any value to slip in a variant when the
variant is set explicitly. This is relevant for multi-valued variants,
in particular for those that have disjoint sets of values.
* Ensure disjoint sets have a clear semantics for external packages
When using an external package with the old concretizer, all
dependencies of that external package were severed. This was not
performed bidirectionally though, so for an external package W with
a dependency on Z, if some other package Y depended on Z, Z could
still pull properties (e.g. compiler) from W since it was not
severed as a parent dependency.
This performs the severing bidirectionally, and adds tests to
confirm expected behavior when using config from DAG-adjacent
packages during concretization.
* Spec.splice feature
Construct a new spec with a dependency swapped out. Currently can only swap dependencies of the same name, and can only apply to concrete specs.
This feature is not yet attached to any install functionality, but will eventually allow us to "rewire" a package to depend on a different set of dependencies.
Docstring is reformatted for git below
Splices dependency "other" into this ("target") Spec, and return the result as a concrete Spec.
If transitive, then other and its dependencies will be extrapolated to a list of Specs and spliced in accordingly.
For example, let there exist a dependency graph as follows:
T
| \
Z<-H
In this example, Spec T depends on H and Z, and H also depends on Z.
Suppose, however, that we wish to use a differently-built H, known as H'. This function will splice in the new H' in one of two ways:
1. transitively, where H' depends on the Z' it was built with, and the new T* also directly depends on this new Z', or
2. intransitively, where the new T* and H' both depend on the original Z.
Since the Spec returned by this splicing function is no longer deployed the same way it was built, any such changes are tracked by setting the build_spec to point to the corresponding dependency from the original Spec.
Co-authored-by: Nathan Hanford <hanford1@llnl.gov>
* Improve error message for inconsistencies in package.py
Sometimes directives refer to variants that do not exist.
Make it such that:
1. The name of the variant
2. The name of the package which is supposed to have
such variant
3. The name of the package making this assumption
are all printed in the error message for easier debugging.
* Add unit tests
Keep spack.store.store and spack.store.db consistent in unit tests
* Remove calls to monkeypatch for spack.store.store and spack.store.db:
tests that used these called one or the other, which lead to
inconsistencies (the tests passed regardless but were fragile as a
result)
* Fixtures making use of monkeypatch with mock_store now use the
updated use_store function, which sets store.store and store.db
consistently
* subprocess_context.TestState now transfers the serializes and
restores spack.store.store (without the monkeypatch changes this
would have created inconsistencies)
* sbang pushed back to callers;
star moved to util.lang
* updated unit test
* sbang test moved; local tests pass
Co-authored-by: Nathan Hanford <hanford1@llnl.gov>
fixes#20736
Before this one line fix we were erroneously deducing
that dependency conditions hold even if a package
was external.
This may result in answer sets that contain imposed
conditions on a node without the node being present
in the DAG, hence #20736.
- [x] add `concretize.lp`, `spack.yaml`, etc. to licensed files
- [x] update all licensed files to say 2013-2021 using
`spack license update-copyright-year`
- [x] appease mypy with some additions to package.py that needed
for oneapi.py
Track all the variant values mentioned when emitting constraints, validate them
and emit a fact that allows them as possible values.
This modification ensures that open-ended variants (variants accepting any string
or any integer) are projected to the finite set of values that are relevant for this
concretization.
* [cmd versions] add spack versions --new flag to only fetch new versions
format
[cmd versions] rename --latest to --newest and add --remote-only
[cmd versions] add tests for --remote-only and --new
format
[cmd versions] update shell tab completion
[cmd versions] remove test for --remote-only --new which gives empty output
[cmd versions] final rename
format
* add brillig mock package
* add test for spack versions --new
* [brillig] format
* [versions] increase test coverage
* Update lib/spack/spack/cmd/versions.py
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
* Update lib/spack/spack/cmd/versions.py
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
fixes#20040
Matching compilers among nodes has been prioritized
in #20020. Selection of default variants has been
tuned in #20182. With this setup there is no need
to have an ad-hoc rule for external packages. On
the contrary it should be removed to prefer having
default variant values over more external nodes in
the DAG.
refers #20040
Before this PR optimization rules would have selected default
providers at a higher priority than default variants. Here we
swap this priority and we consider variants that are forced by
any means (root spec or spec in depends_on clause) the same as
if they were with a default value.
This prevents the solver from avoiding expected configurations
just because they contain directives like:
depends_on('pkg+foo')
and `+foo` is not the default variant value for pkg.
fixes#19981
This commit adds support for target ranges in directives,
for instance:
conflicts('+foo', when='target=x86_64:,aarch64:')
If any target in a spec body is not a known target the
following clause will be emitted:
node_target_satisfies(Package, TargetConstraint)
when traversing the spec and a definition of
the clause will then be printed at the end similarly
to what is done for package and compiler versions.
fixes#20019
Before this modification having a newer version of a node came
at higher priority in the optimization than having matching
compilers. This could result in unexpected configurations for
packages with conflict directives on compilers of the type:
conflicts('%gcc@X.Y:', when='@:A.B')
where changing the compiler for just that node is preferred to
lower the node version to less than 'A.B'. Now the priority has
been switched so the solver will try to lower the version of the
nodes in question before changing their compiler.
refers #20079
Added docstrings to 'concretize' and 'concretized' to
document the format for tests.
Added tests for the activation of test dependencies.
refers #20040
This modification emits rules like:
provides_virtual("netlib-lapack","blas") :- variant_value("netlib-lapack","external-blas","False").
for packages that provide virtual dependencies conditionally instead
of a fact that doesn't account for the condition.
Users can add test() methods to their packages to run smoke tests on
installations with the new `spack test` command (the old `spack test` is
now `spack unit-test`). spack test is environment-aware, so you can
`spack install` an environment and then run `spack test run` to run smoke
tests on all of its packages. Historical test logs can be perused with
`spack test results`. Generic smoke tests for MPI implementations, C,
C++, and Fortran compilers as well as specific smoke tests for 18
packages.
Inside the test method, individual tests can be run separately (and
continue to run best-effort after a test failure) using the `run_test`
method. The `run_test` method encapsulates finding test executables,
running and checking return codes, checking output, and error handling.
This handles the following trickier aspects of testing with direct
support in Spack's package API:
- [x] Caching source or intermediate build files at build time for
use at test time.
- [x] Test dependencies,
- [x] packages that require a compiler for testing (such as library only
packages).
See the packaging guide for more details on using Spack testing support.
Included is support for package.py files for virtual packages. This does
not change the Spack interface, but is a major change in internals.
Co-authored-by: Tamara Dahlgren <dahlgren1@llnl.gov>
Co-authored-by: wspear <wjspear@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
This commit address the case of concretizing a root spec with a
transitive conditional dependency on a virtual package, provided
by an external. Before these modifications default variant values
for the dependency bringing in the virtual package were not
respected, and the external package providing the virtual was added
to the DAG.
The issue stems from two facts:
- Selecting a provider has higher precedence than selecting default variants
- To ensure that an external is preferred, we used a negative weight
To solve it we shift all the providers weight so that:
- External providers have a weight of 0
- Non external provider have a weight of 10 or more
Using a weight of zero for external providers is such that having
an external provider, if present, or not having a provider at all
has the same effect on the higher priority minimization.
Also fixed a few minor bugs in concretize.lp, that were causing
spurious entries in the final answer set.
Cleaned concretize.lp from leftover rules.
This commit introduces a new rule:
real_node(Package) :- not external(Package), node(Package).
that permits to distinguish between an external node and a
real node that shouldn't trim dependency. It solves the
case of concretizing ninja with an external Python.
As reported, conflicts with compiler ranges were not treated
correctly. This commit adds tests to verify the expected behavior
for the new concretizer.
The new rules to enforce a correct behavior involve:
- Adding a rule to prefer the compiler selected for
the root package, if no other preference is set
- Give a strong negative weight to compiler preferences
expressed in packages.yaml
- Maximize on compiler AND compiler version match
As of #13100, Spack installs the dependencies of a _single_ spec in parallel.
Environments, when installed, can only get parallelism from each individual
spec, as they're installed in order. This PR makes entire environments build
in parallel by extending Spack's package installer to accept multiple root
specs. The install command and Environment class have been updated to use
the new parallel install method.
The specs and kwargs for each *uninstalled* package (when not force-replacing
installations) of an environment are collected, passed to the `PackageInstaller`,
and processed using a single build queue.
This introduces a `BuildRequest` class to track install arguments, and it
significantly cleans up the code used to track package ids during installation.
Package ids in the build queue are now just DAG hashes as you would expect,
Other tasks:
- [x] Finish updating the unit tests based on `PackageInstaller`'s use of
`BuildRequest` and the associated changes
- [x] Change `environment.py`'s `install_all` to use the `PackageInstaller` directly
- [x] Change the `install` command to leverage the new installation process for multiple specs
- [x] Change install output messages for external packages, e.g.:
`[+] /usr` -> `[+] /usr (external bzip2-1.0.8-<dag-hash>`
- [x] Fix incomplete environment install's view setup/update and not confirming all
packages are installed (?)
- [x] Ensure externally installed package dependencies are properly accounted for in
remaining build tasks
- [x] Add tests for coverage (if insufficient and can identity the appropriate, uncovered non-comment lines)
- [x] Add documentation
- [x] Resolve multi-compiler environment install issues
- [x] Fix issue with environment installation reporting (restore CDash/JUnit reports)
* allow environments to specify dev-build packages
* spack develop and spack undevelop commands
* never pull dev-build packges from bincache
* reinstall dev_specs when code has changed; reinstall dependents too
* preserve dev info paths and versions in concretization as special variant
* move install overwrite transaction into installer
* move dev-build argument handling to package.do_install
now that specs are dev-aware, package.do_install can add
necessary args (keep_stage=True, use_cache=False) to dev
builds. This simplifies driving logic in cmd and env._install
* allow 'any' as wildcard for variants
* spec: allow anonymous dependencies
raise an error when constraining by or normalizing an anonymous dep
refactor concretize_develop to remove dev_build variant
refactor tests to check for ^dev_path=any instead of +dev_build
* fix variant class hierarchy
* autotools: add attribute to delete libtool archives .la files
According to Autotools Mythbuster (https://autotools.io/libtool/lafiles.html)
libtool archive files are mostly vestigial, but they might create issues
when relocating binary packages as shown in #18694.
For GCC specifically, most distributions remove these files with
explicit commands:
https://git.stg.centos.org/rpms/gcc/blob/master/f/gcc.spec#_1303
Considered all of that, this commit adds an easy way for each
AutotoolsPackage to remove every .la file that has been installed.
The default, for the time being, is to maintain them - to be consistent
with what Spack was doing previously.
* autotools: delete libtool archive files by default
Following review this commit changes the default for
libtool archive files deletion and adds test to verify
the behavior.
The YAML config for paths and modules of external packages has
changed: the new format allows a single spec to load multiple
modules. Spack will automatically convert from the old format
when reading the configs (the updates do not add new essential
properties, so this change in Spack is backwards-compatible).
With this update, Spack cannot modify existing configs/environments
without updating them (e.g. “spack config add” will fail if the
configuration is in a format that predates this PR). The user is
prompted to do this explicitly and commands are provided. All
config scopes can be updated at once. Each environment must be
updated one at a time.
* Buildcache:
* Try mocking an install of quux, corge and garply using prebuilt binaries
* Put patchelf install after ccache restore
* Add script to install patchelf from source so it can be used on Ubuntu:Trusty which does not have a patchelf pat package. The script will skip building on macOS
* Remove mirror at end of bindist test
* Add patchelf to Ubuntu build env
* Revert mock patchelf package to allow other tests to run.
* Remove depends_on('patchelf', type='build') relying instead on
* Test fixture to ensure patchelf is available.
* Call g++ command to build libraries directly during test build
* Flake8
* Install patchelf in before_install stage using apt unless on Trusty where a build is done.
* Add some symbolic links between packages
* Flake8
* Flake8:
* Update mock packages to write their own source files
* Create the stage because spec search does not create it any longer
* updates after change of list command arguments
* cleanup after merge
* flake8
Because of the way abstract variants are implemented, the following
spec matrix does not work as intended:
```
matrix:
- [foo]
- [bar=a, bar=b]
exclude:
- bar=a
```
because abstract variants always satisfy any variant of the same
name, regardless of values.
This PR converts abstract variants to whatever their appropriate
type is before running satisfaction checks for the excludes clause
in a matrix.
fixes#16841
This change also adds a code path through the spack ci pipelines
infrastructure which supports PR testing on the Spack repository.
Gitlab pipelines run as a result of a PR (either creation or pushing
to a PR branch) will only verify that the packages in the environment
build without error. When the PR branch is merged to develop,
another pipeline will run which results in the generated binaries
getting pushed to the binary mirror.
Add a `spack external find` command that tries to populate
`packages.yaml` with external packages from the user's `$PATH`. This
focuses on finding build dependencies. Currently, support has only been
added for `cmake`.
For a package to be discoverable with `spack external find`, it must define:
* an `executables` class attribute containing a list of
regular expressions that match executable names.
* a `determine_spec_details(prefix, specs_in_prefix)` method
Spack will call `determine_spec_details()` once for each prefix where
executables are found, passing in the path to the prefix and the path to
all found executables. The package is responsible for invoking the
executables and figuring out what type of installation(s) are in the
prefix, and returning one or more specs (each with version, variants or
whatever else the user decides to include in the spec).
The found specs and prefixes will be added to the user's `packages.yaml`
file. Providing the `--not-buildable` option will mark all generated
entries in `packages.yaml` as `buildable: False`
Update compiler config with bootstrapped compiler when it was already installed and added config defaults to code so mutable_config test fixture works.
* SourceForge: Mirror Mixin
Add a mixing class for direct `CNAME`s to sourceforge mirrors.
Since the main gateway servers are often down, this could reduce
timeouts and fetch errors for sourceforge.net hosted software.
* SourceForge: unspectacular mirror replacement
add mirrors to all sourceforge packages with trivial
download logic.
tested fetch of latest version of each of these packages
with various mirrors before committing.
* SourceForge: xz
the author homepage is chronocially overrun and this is the offical
upload with many mirrors.
