The current `mkdir {{ paths.environment }}` will generate an error if:
* `{{ paths.environment }}` already exists, or
* `{{ paths.environment }}` is nested in non-existing dirs.
Adding `-p` to the command will make this robust to both possibilities.
Set noclobber bash option when writing manifest.
- we don't have a fallback if make is not installed
- we assume file system locking works
- we don't verify that make is gnu make (bootstrapping fails on FreeBSD as a result)
- there are some weird race conditions in writing spack.yaml on concurrent spack install
- the view is updated after every package install instead of post environment install.
Update Tcl modulefile template to simplify generated `append-path`,
`prepend-path` and `remove-path` commands and improve their readability.
If path element delimiter is colon character, do not set the `--delim`
option as it is the default delimiter value.
Use curly braces instead of quotes to enclose value or text in Tcl
modulefile. Within curly braces Tcl special characters like [, ] or $
are treated verbatim whereas they are evaluated within quotes.
Curly braces is Tcl recommended way to enclose verbatim content [1].
Note: if curly braces charaters are used within content, they must be
balanced. This point has been checked against current repository and no
unbalanced curly braces has been spotted.
Fixes#24243
[1] https://wiki.tcl-lang.org/page/Tcl+Minimal+Escaping+Style
Add support for conflict directives in Lua modulefile like done for Tcl
modulefile.
Note that conflicts are correctly honored on Lmod and Environment
Modules <4.2 only if mutually expressed on both modulefiles that
conflict with each other.
Migrate conflict code from Tcl-specific classes to the common part. Add
tests for Lmod and split the conflict test case in two.
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
Refactor `TermTitle` into `InstallStatus` and use it to show progress
information both in the terminal title as well as inline. This also
turns on the terminal title status by default.
The inline output will look like the following after this change:
```
==> Installing m4-1.4.19-w2fxrpuz64zdq63woprqfxxzc3tzu7p3 [4/4]
```
Update Tcl modulefile template to use the `depends-on` command to
autoload modules if Lmod is the current module tool.
Autoloading modules with `module load` command in Tcl modulefile does
not work well for Lmod at some extend. An attempt to unload then load
designated module is performed each time such command is encountered. It
may lead to a load storm that may not end correctly with large number of
module dependencies.
`depends-on` command should be used for Lmod instead of `module load`,
as it checks if module is already loaded, and does not attempt to reload
this module.
Lua modulefile template already uses `depends_on` command to autoload
dependencies. Thus it is already considered that to use Lmod with Spack,
it must support `depends_on` command (version 7.6+).
Environment Modules copes well with `module load` command to autoload
dependencies (version 3.2+). `depends-on` command is supported starting
version 5.1 (as an alias of `prereq-all` command) which was relased last
year.
This change introduces a test to determine if current module tool that
evaluates modulefile is Lmod. If so, autoload dependencies are defined
with `depends-on` command. Otherwise `module load` command is used.
Test is based on `LMOD_VERSION_MAJOR` environment variable, which is set
by Lmod starting version 5.1.
Fixes#36764
Update modulefile templates to append a trailing delimiter to MANPATH
environment variable, if the modulefile sets it.
With a trailing delimiter at ends of MANPATH's value, man will search
the system man pages after searching the specific paths set.
Using append-path/append_path to add this element, the module tool
ensures it is appended only once. When modulefile is unloaded, the
number of append attempt is decreased, thus the trailing delimiter is
removed only if this number equals 0.
Disclaimer: no path element should be appended to MANPATH by generated
modulefiles. It should always be prepended to ensure this variable's
value ends with the trailing delimiter.
Fixes#11355.
- Update default image to Ubuntu 22.04 (previously was still Ubuntu 18.04)
- Optionally use depfiles to install the environment within the container
- Allow extending Dockerfile Jinja2 template
- Allow extending Singularity definition file Jinja2 template
- Deprecate previous options to add extra instructions
Update tcl and lmod modulefile template to provide more information on
help message (name, version and target) like done on whatis for lmod
modulefiles.
Adapt tcl and lmod modulefile templates to generate append-path or
remove-path commands in modulefile when respectively append_flags or
remove_flags commands are defined in package for run environment.
Fixes#10299.
Simplify environment modification block in modulefile Tcl template by
always setting a path delimiter to the prepend-path, append-path and
remove-path commands.
Remove --delim option to the setenv command as this command does not
allow such option.
Update test_prepend_path_separator test to explicitly check the 6
path-like commands that should be present in generated modulefile.
Example one:
```
spack install --add x y z
```
is equivalent to
```
spack add x y z
spack concretize
spack install --only-concrete
```
where `--only-concrete` installs without modifying spack.yaml/spack.lock
Example two:
```
spack install
```
concretizes current spack.yaml if outdated and installs all specs.
Example three:
```
spack install x y z
```
concretizes current spack.yaml if outdated and installs *only* concrete
specs in the environment that match abstract specs `x`, `y`, or `z`.
Adapt tcl modulefile template to call "module load" on autoload
dependency without testing if this dependency is already loaded or not.
The is-loaded test is not necessary, as module commands know how to cope
with an already loaded module. With environment-modules 4.2+ (released
in 2018) it is also important to have this "module load" command even if
dependency is already loaded in order to record that the modulefile
declares such dependency. This is important if you want to keep a
consistent environment when a dependent module is unloaded.
The "Autoloading" verbose message is also removed as recent module
commands will report such information to the user (depending on the
verbosity configured for the module command).
Such change has been test successfully with Modules 3.2 (EL7), 4.5 (EL8)
and 5.2 (latest) and also with Lmod 7 and 8 (as it is mentionned in
Spack docs that Lmod can be used along with tcl modules). Dependencies
are correctly loaded or unloaded, whether they are loaded/unloaded or
not.
This change fixes Tcl quoting issue introduced in #32853.
Fixes#19155.
With the new variable [prefix/]SPACK_PACKAGE_IDS you can conveniently execute
things after each successful install.
For example push just-built packages to a buildcache
```
SPACK ?= spack
export SPACK_COLOR = always
MAKEFLAGS += -Orecurse
MY_BUILDCACHE := $(CURDIR)/cache
.PHONY: all clean
all: push
ifeq (,$(filter clean,$(MAKECMDGOALS)))
include env.mk
endif
# the relevant part: push has *all* example/push/<pkg identifier> as prereqs
push: $(addprefix example/push/,$(example/SPACK_PACKAGE_IDS))
$(SPACK) -e . buildcache update-index --directory $(MY_BUILDCACHE)
$(info Pushed everything, yay!)
# and each example/push/<pkg identifier> has the install target as prereq,
# and the body can use target local $(HASH) and $(SPEC) variables to do
# things, such as pushing to a build cache
example/push/%: example/install/%
@mkdir -p $(dir $@)
$(SPACK) -e . buildcache create --allow-root --only=package --unsigned --directory $(MY_BUILDCACHE) /$(HASH) # push $(SPEC)
@touch $@
spack.lock: spack.yaml
$(SPACK) -e . concretize -f
env.mk: spack.lock
$(SPACK) -e . env depfile -o $@ --make-target-prefix example
clean:
rm -rf spack.lock env.mk example/
``
`spack graph` has been reworked to use:
- Jinja templates
- builder objects to construct the template context when DOT graphs are requested.
This allowed to add a new colored output for DOT graphs that highlights both
the dependency types and the nodes that are needed at runtime for a given spec.
This commit reworks the bootstrapping procedure to use Spack environments
as much as possible.
The `spack.bootstrap` module has also been reorganized into a Python package.
A distinction is made among "core" Spack dependencies (clingo, GnuPG, patchelf)
and other dependencies. For a number of reasons, explained in the `spack.bootstrap.core`
module docstring, "core" dependencies are bootstrapped with the current ad-hoc
method.
All the other dependencies are instead bootstrapped using a Spack environment
that lives in a directory specific to the interpreter and the architecture being used.
When installing some/all specs from a buildcache, build edges are pruned
from those specs. This can result in a much smaller effective DAG. Until
now, `spack env depfile` would always generate a full DAG.
Ths PR adds the `spack env depfile --use-buildcache` flag that was
introduced for `spack install` before. This way, not only can we drop
build edges, but also we can automatically set the right buildcache
related flags on the specific specs that are gonna get installed.
This way we get parallel installs of binary deps without redundancy,
which is useful for Gitlab CI.
* env depfile: allow deps only install
- Refactor `spack env depfile` to use a Jinja template, making it a bit
easier to follow as a human being.
- Add a layer of indirection in the generated Makefile through an
`<prefix>/.install-deps/<hash>` target, which allows one to specify
different options when installing dependencies. For example, only
verbose/debug mode on when installing some particular spec:
```
$ spack -e my_env env depfile -o Makefile --make-target-prefix example
$ make example/.install-deps/<hash> -j16
$ make example/.install/<hash> SPACK="spack -d" SPACK_INSTALL_FLAGS=--verbose -j16
```
This could be used to speed up `spack ci rebuild`:
- Parallel install of dependencies from buildcache
- Better readability of logs, e.g. reducing verbosity when installing
dependencies, and splitting logs into deps.log and current_spec.log
* Silence please!
Caches used by repositories don't reference the global spack.repo.path instance
anymore, but get the repository they refer to during initialization.
Spec.virtual now use the index, and computation done to compute the index
use Repository.is_virtual_safe.
Code to construct mock packages and mock repository has been factored into
a unique MockRepositoryBuilder that is used throughout the codebase.
Add debug print for pushing and popping config scopes.
Changed spack.repo.use_repositories so that it can override or not previous repos
spack.repo.use_repositories updates spack.config.config according to the modifications done
Removed a peculiar behavior from spack.config.Configuration where push would always
bubble-up a scope named command_line if it existed
Remove `module-info mode load` condition that prevents auto-unloading when autoloading is enabled. It looks like this condition was added to work around an issue in environment-modules that is no longer necessary.
Add quotes to make is-loaded happy
This support requires adding the '--tests' option to 'spack ci rebuild'.
Packages whose stand-alone tests are broken (in the CI environment) can
be configured in gitlab-ci to be skipped by adding them to
broken-tests-packages.
Highlights include:
- Restructured 'spack ci' help to provide better subcommand summaries;
- Ensured only one InstallError (i.e., installer's) rather than allowing
build_environment to have its own; and
- Refactored CI and CDash reporting to keep CDash-related properties and
behavior in a separate class.
This allows stand-alone tests from `spack ci` to run when the `--tests`
option is used. With `--tests`, stand-alone tests are run **after** a
**successful** (re)build of the package. Test results are collected
and report(able) using CDash.
This PR adds the following features:
- Adds `-t` and `--tests` to `spack ci rebuild` to run stand-alone tests;
- Adds `--fail-fast` to stop stand-alone tests after the first failure;
- Ensures a *single* `InstallError` across packages
(i.e., removes second class from build environment);
- Captures skipping tests for externals and uninstalled packages
(for CDash reporting);
- Copies test logs and outputs to the CI artifacts directory to facilitate
debugging;
- Parses stand-alone test results to report outputs from each `run_test` as
separate test parts (CDash reporting);
- Logs a test completion message to allow capture of timing of the last
`run_test` part;
- Adds the runner description to the CDash site to better distinguish entries
in CDash tables;
- Adds `gitlab-ci` `broken-tests-packages` to CI configuration to skip
stand-alone testing for packages with known issues;
- Changes `spack ci --help` so description of each subcommand is a single line;
- Changes `spack ci <subcommand> --help` to provide the full description of
each command (versus no description); and
- Ensures `junit` test log file ends in an `.xml` extension (versus default where
it does not).
Tasks:
- [x] Include the equivalent of the architecture information, or at least the host target, in the CDash output
- [x] Upload stand-alone test results files as `test` artifacts
- [x] Confirm tests are run in GitLab
- [x] Ensure CDash results are uploaded as artifacts
- [x] Resolve issues with CDash build-and test results appearing on same row of the table
- [x] Add unit tests as needed
- [x] Investigate why some (dependency) packages don't have test results (e.g., related from other pipelines)
- [x] Ensure proper parsing and reporting of skipped tests (as `not run`) .. post- #28701 merge
- [x] Restore the proper CDash URLand or mirror ONCE out-of-band testing completed
