This commit extends the DSL that can be used in packages
to allow declaring that a package uses different build-systems
under different conditions.
It requires each spec to have a `build_system` single valued
variant. The variant can be used in many context to query, manipulate
or select the build system associated with a concrete spec.
The knowledge to build a package has been moved out of the
PackageBase hierarchy, into a new Builder hierarchy. Customization
of the default behavior for a given builder can be obtained by
coding a new derived builder in package.py.
The "run_after" and "run_before" decorators are now applied to
methods on the builder. They can also incorporate a "when="
argument to specify that a method is run only when certain
conditions apply.
For packages that do not define their own builder, forwarding logic
is added between the builder and package (methods not found in one
will be retrieved from the other); this PR is expected to be fully
backwards compatible with unmodified packages that use a single
build system.
Reworking lua to allow easier substitution of the base lua implementation.
Also adding in a maintained version of luajit and re-factoring the entire stack
to use a custom build-system to centralize functionality like environment
variable management and luarocks installation.
The `lua-lang` virtual is now versioned so that a package that requires
Lua 5.1 semantics can get any lua, but one that requires 5.2 will only
get upstream lua.
The luaposix package requires lua-bit32, but only when built with a
lua conforming to version 5.1. This adds the package, and the
dependencies, but exposed a problem with luarocks dependency
detection. Since we're installing each package in its own "tree" and
there's no environment variable to list extra trees, spack now
generates a luarocks config file that lists all the trees of all the
dependencies, and references it by setting `LUAROCKS_CONFIG`
in the build environment of every LuaPackage. This allows luarocks
to find the spack installed dependencies correctly rather than
trying (and failing) to download them.
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Tom Scogland <tscogland@llnl.gov>
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
- Add variants for various common build flags, including support for both versions of the Racket VM environment.
- Prevent `-j` flags to `make`, which has been known to cause problems with Racket builds.
- Prefer the minimal release to improve install times. Bells and whistles carry their own runtime dependencies and should be installed via `raco`. An enterprising user may even create a `RacketPackage` class to make spack aware of `raco` installed packages.
- Match the official version numbering scheme.
* cmake: use CMAKE_INSTALL_RPATH_USE_LINK_PATH
Spack has a heuristic to add rpaths for packages it knows are required,
but it's really a heuristic, and it does not work when the dependencies
put their libraries in a different folder than `<prefix>/lib{64,}`.
CMake patches binaries after install with the "install rpaths", which by
default are provided by Spack and its heuristic through
`CMAKE_INSTALL_RPATH`.
CMake however knows better what libraries are effectively being linked
to, and has an option to include those in the install rpath too, through
`CMAKE_INSTALL_RPATH_USE_LINK_PATH`.
These two CMake options are complementary, repeated rpaths seem to be
filtered, and the "use link path" paths are appended to Spack's
heuristic "install rpath".
So, it seems like a good idea to enable "use link path" by default, so
that:
- `dlopen` by library name uses Spack's heuristic search paths
- linked libraries in non-standard locations within a prefix get an
rpath thanks to CMake.
* docs
* Use pip to bootstrap pip
* Bootstrap wheel from source
* Update PythonPackage to install using pip
* Update several packages
* Add wheel as base class dep
* Build phase no longer exists
* Add py-poetry package, fix py-flit-core bootstrapping
* Fix isort build
* Clean up many more packages
* Remove unused import
* Fix unit tests
* Don't directly run setup.py
* Typo fix
* Remove unused imports
* Fix issues caught by CI
* Remove custom setup.py file handling
* Use PythonPackage for installing wheels
* Remove custom phases in PythonPackages
* Remove <phase>_args methods
* Remove unused import
* Fix various packages
* Try to test Python packages directly in CI
* Actually run the pipeline
* Fix more packages
* Fix mappings, fix packages
* Fix dep version
* Work around bug in concretizer
* Various concretization fixes
* Fix gitlab yaml, packages
* Fix typo in gitlab yaml
* Skip more packages that fail to concretize
* Fix? jupyter ecosystem concretization issues
* Solve Jupyter concretization issues
* Prevent duplicate entries in PYTHONPATH
* Skip fenics-dolfinx
* Build fewer Python packages
* Fix missing npm dep
* Specify image
* More package fixes
* Add backends for every from-source package
* Fix version arg
* Remove GitLab CI stuff, add py-installer package
* Remove test deps, re-add install_options
* Function declaration syntax fix
* More build fixes
* Update spack create template
* Update PythonPackage documentation
* Fix documentation build
* Fix unit tests
* Remove pip flag added only in newer pip
* flux: add explicit dependency on jsonschema
* Update packages that have been added since this was branched off of develop
* Move Python 2 deprecation to a separate PR
* py-neurolab: add build dep on py-setuptools
* Use wheels for pip/wheel
* Allow use of pre-installed pip for external Python
* pip -> python -m pip
* Use python -m pip for all packages
* Fix py-wrapt
* Add both platlib and purelib to PYTHONPATH
* py-pyyaml: setuptools is needed for all versions
* py-pyyaml: link flags aren't needed
* Appease spack audit packages
* Some build backend is required for all versions, distutils -> setuptools
* Correctly handle different setup.py filename
* Use wheels for py-tomli to avoid circular dep on py-flit-core
* Fix busco installation procedure
* Clarify things in spack create template
* Test other Python build backends
* Undo changes to busco
* Various fixes
* Don't test other backends
* Use gnuconfig package for config file replacement
Currently the autotools build system tries to pick up config.sub and
config.guess files from the system (in /usr/share) on arm and power.
This is introduces an implicit system dependency which we can avoid by
distributing config.guess and config.sub files in a separate package,
such as the new `gnuconfig` package which is very lightweight/text only
(unlike automake where we previously pulled these files from as a
backup). This PR adds `gnuconfig` as an unconditional build dependency
for arm and power archs.
In case the user needs a system version of config.sub and config.guess,
they are free to mark `gnuconfig` as an external package with the prefix
pointing to the directory containing the config files:
```yaml
gnuconfig:
externals:
- spec: gnuconfig@master
prefix: /tmp/tmp.ooBlkyAKdw/lol
buildable: false
```
Apart from that, this PR gives some better instructions for users when
replacing config files goes wrong.
* Mock needs this package too now, because autotools adds a depends_on
* Add documentation
* Make patch_config_files a prop, fix the docs, add integrations tests
* Make macOS happy
* autotoolspackage.rst: No depends_on('m4') with depends_on('autoconf')
- Remove `m4` from the example depends_on() lines for the autoreconf phase.
- Change the branch used as example from develop to master as it is
far more common in the packages of spack's builtin repo.
- Fix the wrong info that libtoolize and aclocal are run explicitly
in the autoreconf phase by default. autoreconf calls these internally
as needed, thus autotools.py also does not call them directly.
- Add that autoreconf() also adds -I<aclocal-prefix>/share/aclocal.
- Add an example how to set autoreconf_extra_args.
- Add an example of a custom autoreconf phase for running autogen.sh.
Co-authored-by: Harmen Stoppels <harmenstoppels@gmail.com>
Bash has a builtin `fc` that will override the compiler if you use "fc",
so it's better to use the full spack-supplied compiler path.
Additionally, the filter regex in the docs was wrong: it replaced the
entire assignment operation with the RHS.
There have been a lot of questions and some confusion recently surrounding Spack installation test capabilities so this PR is intended to clean up and refine the documentation for "Checking an installation".
It aims to better distinguish between checks that are performed during an installation (i.e., build-time tests) and those that can be done days and weeks after the software has been installed (i.e., install (or smoke) tests).
* Clarify stub compiler definition in compilers.yaml
* Update explanation of why stub compiler definition is needed
* Add note about required module definition when using Spack-installed
intel-parallel-studio as intel-compiler
* Add suggestion about updating package config preferences based on
choice of variants when installing intel-parallel-studio to avoid
reinstallation
- Use debugoptimized as default build type, just like RelWithDebInfo for cmake
- Do not strip by default, and add a default_library variant which conveniently support both shared and static
* Replace URL computation in base IntelOneApiPackage class with
defining URLs in component packages (this is expected to be
simpler for now)
* Add component_dir property that all oneAPI component packages must
define. This property names a directory that should exist after
installation completes (useful for making sure the install was
successful) and also defines the search location for the
component's environment update script.
* Add needed dependencies for components (e.g. intel-oneapi-dnn
requires intel-oneapi-tbb). The compilers provided by
intel-oneapi-compilers need some components under certain
circumstances (e.g. when enabling SYCL support) but these were
omitted since the libraries should only be linked when a
dependent package requests that feature
* Remove individual setup_run_environment implementations and use
IntelOneApiPackage superclass method which sources vars.sh
(located in a subdirectory of component_dir)
* Add documentation for IntelOneApiPackge build system
Co-authored-by: Vasily Danilin <vasily.danilin@yandex.ru>
* Improve R package creation
This PR adds the `list_url` attribute to CRAN R packages when using
`spack create`. It also adds the `git` attribute to R Bioconductor
packages upon creation.
* Switch over to using cran/bioc attributes
The cran/bioc entries are set to have the '=' line up with homepage
entry, but homepage does not need to exist in the package file. If it
does not, that could affect the alignment.
* Do not have to split bioc
* Edit R package documentation
Explain Bioconductor packages and add `cran` and `bioc` attributes.
* Update lib/spack/docs/build_systems/rpackage.rst
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update lib/spack/docs/build_systems/rpackage.rst
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Simplify the cran attribute
The version can be faked so that the cran attribute is simply equal to
the CRAN package name.
* Edit the docs to reflect new `cran` attribute format
* Use the first element of self.versions() for url
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
- [x] add `concretize.lp`, `spack.yaml`, etc. to licensed files
- [x] update all licensed files to say 2013-2021 using
`spack license update-copyright-year`
- [x] appease mypy with some additions to package.py that needed
for oneapi.py
