* gitlab: remove requests for unreferenced packages
The packages removed in this commit are not built by any of
our current GitLab CI stacks.
* gitlab: update memory requests for "huge" packages
* gitlab: reduce memory requests for overprovisioned packages
* gitlab: more memory for py-torch (again)
* gitlab: update memory but keep CPU the same
It is useful to enable/disable stacks in order to handle turning
specific stacks on/off based on runner availability, stack stability,
testing requirements, etc.
The disabled stack list takes precedence over the enable stack list. The
assumption is that stacks that are disabled are so due to some
functionality missing or broken for that stack.
The enable stack list implicitly disables all stacks not listed in the
enable list.
The main script body is over-written for power. Putting thet timing
aggregation in the after script allows it to be called on all of the
current pipelines.
This "breaks" the deprecated schema by allowing unknown attributes
to the attributes section of the job types. The breaking change here is
that deprecated stacks will no longer ignore attributes that are unknown
but rather assume the new CI schema behavior of injecting them into the
generated CI configuration. This change is required to secure
authentication in Spack CI.
* gitlab: remove commented-out duplicate entries
* gitlab: reclassify some packages from "huge" to "large"
Our observed max memory usage for these packages is as follows:
hipblas: 7.7G
qt: 6.6G
visit: 9.7G
All of these should fit within a "large" request (currently 12G).
* gitlab: remove pango from list of huge packages
This package is not currently built by any of our CI stacks.
* gitlab: update requests for high memory packages
Refine resource requests for memory-intensive packages based on
max memory usage data.
Currently requirements allow to express "strong preferences" and "conflicts" from
configuration using a convoluted syntax:
```yaml
packages:
zlib-ng:
require:
# conflict on %clang
- one_of: ["%clang", "@:"]
# Strong preference for +shared
- any_of: ["+shared", "@:"]
```
This PR adds syntactic sugar so that the same can be written as:
```yaml
packages:
zlib-ng:
conflict:
- "%clang"
prefer:
- "+shared"
```
Preferences written in this way are "stronger" that the ones documented at:
- https://spack.readthedocs.io/en/latest/packages_yaml.html#package-preferences
* e4s ci: use latest intel/hpckit 2024 based image
* use latest container image: ecpe4s/ubuntu22.04-runner-amd64-oneapi-2024.0.0:2023.12.01
* comment out failing specs
* update to use patched container
* remove generalized package preference for intel-oneapi-mkl@2023
* change packages commented out
Like `spack change` for specs in environments, this can e.g. replace `examplespec+debug` with `examplespec~debug` in a `require:` section.
Example behavior for a config like:
```
packages:
foo:
require:
- spec: +debug
```
* `spack config change packages:foo:require:~debug` replaces `+debug` with `~debug`
* `spack config change packages:foo:require:@1.1` adds a requirement to the list
* `spack config change packages:bar:require:~debug` adds a requirement
The current `mkdir {{ paths.environment }}` will generate an error if:
* `{{ paths.environment }}` already exists, or
* `{{ paths.environment }}` is nested in non-existing dirs.
Adding `-p` to the command will make this robust to both possibilities.
Set noclobber bash option when writing manifest.
Add `--create` option to `env activate` to allow users to create and activate in one command.
---------
Co-authored-by: Wouter Deconinck <wdconinc@gmail.com>
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
Co-authored-by: psakievich <psakievich@users.noreply.github.com>
* setup-env: Fix back and forth between two instances
* setup-env.csh: Fix SPACK_ROOT when switch to a different instance
i.e. Always look for the current SPACK_ROOT
* setup-env: Update comments
This adds options to `spack list` that allow you to list only packages from specific
repositories/namespaces, e.g.:
```console
spack list -r builtin
```
only lists packages from the `builtin` repo, while:
```console
spack list -r myrepo -r myrepo2
```
would list packages from `myrepo` and `myrepo2`, but not from `builtin`. Note that you
can use the same argument multiple times.
You can use either `-r` / `--repo` or `-N` / `--namespace`. `-N` is there to match the
corresponding option on `spack find`.
- [x] add `-r` / `--repo` / `-N` / `--namespace` argument
- [x] add test
* Add rust-analyzer as variant to rust build
* Expose cargo module only when +cargo
* rust: add v1.74.0 and v1.75.0 and remove variants in favor of +dev
* [@spackbot] updating style on behalf of alecbcs
* Fix variant typo
---------
Co-authored-by: alecbcs <alecbcs@users.noreply.github.com>
This adds a few options to `spack gc`.
One to give you a little more control over dependencies:
* `-b` / `--keep-build-dependencies`: By default, `spack gc` considers build dependencies to be "no longer needed" once their dependents are installed. With this option, we'll keep build dependencies of needed installations as well.
And two more to make working with environments easier:
* `-E` / `--except-any-environment`: Garbage collect anything NOT needed by an environment. `spack gc -E` and `spack gc -bE` are now easy ways to get rid of everytihng not used by some environment.
* `-e` / `--except-environment` `ENV`: Instead of considering all environments, garbage collect everything not needed by a *specific* environment. Note that you can use this with `-E` to add directory environments to the list of considered envs, e.g.:
spack gc -E -e /path/to/direnv1 -e /path/to/direnv2 #...
- [x] rework `unused_specs()` method on DB to add options for roots and deptypes
- [x] add `all_hashes()` method on DB
- [x] rework `spack gc` command to add 3 more options
- [x] tests
The gcc-runtime package adds a separate node for gcc's dynamic runtime
libraries.
This should help with:
1. binary caches where rpaths for compiler support libs cannot be
relocated because the compiler is missing on the target system
2. creating "minimal" container images
The package is versioned like `gcc` (in principle it could be
unversioned, but Spack doesn't always guarantee not mixing compilers)
This PR adds a flag `--tag/-t` to `buildcache push`, which you can use like
```
$ spack mirror add my-oci-registry oci://example.com/hello/world
$ spack -e my_env buildcache push --base-image ubuntu:22.04 --tag my_custom_tag my-oci-registry
```
and lets users ship a full, installed environment as a minimal container image where each image layer is one Spack package, on top of a base image of choice. The image can then be used as
```
$ docker run -it --rm example.com/hello/world:my_custom_tag
```
Apart from environments, users can also pick arbitrary installed spec from their database, for instance:
```
$ spack buildcache push --base-image ubuntu:22.04 --tag some_specs my-oci-registry gcc@12 cmake
$ docker run -it --rm example.com/hello/world:some_specs
```
It has many advantages over `spack containerize`:
1. No external tools required (`docker`, `buildah`, ...)
2. Creates images from locally installed Spack packages (No need to rebuild inside `docker build`, where troubleshooting build failures is notoriously hard)
3. No need for multistage builds (Spack just tarballs existing installations of runtime deps)
4. Reduced storage size / composability: when pushing multiple environments with common specs, container image layers are shared.
5. Automatic build cache: later `spack install` of the env elsewhere speeds up since the containerized environment is a build cache
* add trim function to `Spec` and `--ignore` option to 'spack diff'
Allows user to compare two specs while ignoring the sub-DAG of a particular dependency, e.g.
spack diff --ignore=mpi --ignore=zlib trilinos/abcdef trilinos/fedcba
to focus on differences closer to the root of the software stack
This PR changes the default behavior of `spack config get` and `spack config blame`
to print a flattened version of the entire spack configuration, including any active
environment, if the commands are invoked with no section arguments.
The new behavior is used in Gitlab CI to help debug CI configuration, but it can also
be useful when asking for more information in issues, or when simply debugging Spack.
Convert the 'develop' section of an environment to a dedicated configuration section.
This means for example that instead of having to define `develop` specs in the
`spack.yaml`, the environment can `include:` another `develop.yaml` configuration
which specifies which specs should be developed in the environment.
This change is not expected to be disruptive given that existing environment `spack.yaml`
files will conform to the new schema.
(Update 11/28/2023) I have implemented the `develop`/`undevelop` commands in terms
of more-generic modification functions added to the `config` module: `change_or_add`
and `update_all`. It is assumed that the semantics added here (described in 11/18 update)
would be desirable to extend to other config update actions (e.g. adding compilers,
changing package requirements, adding mirrors).
(Update 11/18/2023) I have updated this such that `spack develop`, and
`spack undevelop` to potentially modify all writable scopes, like
https://github.com/spack/spack/pull/41147. https://github.com/spack/spack/pull/35307
will be useful for modifying included scopes, but generally speaking specifying a
`--scope` will not be required for `spack develop`: `spack develop` will add new
develop specs to whatever scope already has develop specs defined, or to the
highest-priority writable scope (which should be the env scope).
TODOs:
- [x] If you `spack undevelop` a package which is mentioned at multiple layers of
configuration, then currently this would only modify one of them. That's not
technically a new issue (has always existed for configuration modification), but
may be confusing to users when presented via an interface other than `spack config set`
- [x] Need to add (or confirm) the ability to modify individual config files by providing
a path (rather than using a scope identifier as a key to retrieve associated config).
- [x] `spack develop` adds new develop specs to the scope that defines them
(potentially skipping higher priority scopes to e.g. augment included scope files)
---------
Co-authored-by: scheibelp <scheibelp@users.noreply.github.com>
Co-authored-by: Todd Gamblin <tgamblin@llnl.gov>
* Add `signed` property to mirror config
* make unsigned a tri-state: true/false overrides mirror config, none takes mirror config
* test commands
* Document this
* add a test
- we don't have a fallback if make is not installed
- we assume file system locking works
- we don't verify that make is gnu make (bootstrapping fails on FreeBSD as a result)
- there are some weird race conditions in writing spack.yaml on concurrent spack install
- the view is updated after every package install instead of post environment install.
* developer tools stack try 2
This version is actually in use locally and has largely stabilized, at
least on x86. Some packages are still a challenge on ppc64le, but maybe
worth keeping this working as a set.
* add packages, try to get container with newer gcc
* remove reuse: true
* try to get cmake to build on medium, 25 minutes is too long
* add lsd package and add to dev tools stack
* clean up fzf dependency and sorting
* Update share/spack/gitlab/cloud_pipelines/stacks/developer_tools/spack.yaml
* cuda: add 12.3.0 (#40827)
* Switch to dashes
* yet more underscores
---------
Co-authored-by: Paul R. C. Kent <kentpr@ornl.gov>
* oneapi 2024.0.0 release
* oneapi v2 directory support and some cleanups
* sycl abi change requires 2024 compilers for packages that use sycl
---------
Co-authored-by: Robert Cohn <robert.s.cohn@intel.com>
We have two ways to concretize now:
* `spack concretize` concretizes only the root specs that are not concrete in the environment.
* `spack concretize -f` eliminates all cached concretization data and reconcretizes the *entire* environment.
This PR adds `spack deconcretize`, which eliminates cached concretization data for a spec. This allows
users greater control over what is preserved from their `spack.lock` file and what is reused when not
using `spack concretize -f`. If you want to update a spec installed in your environment, you can call
`spack deconcretize` on it, and that spec and any relevant dependents will be removed from the lock file.
`spack concretize` has two options:
* `--root`: limits deconcretized specs to *specific* roots in the environment. You can use this to
deconcretize exactly one root in a `unify: false` environment. i.e., if `foo` root is a dependent
of `bar`, both roots, `spack deconcretize bar` will *not* deconcretize `foo`.
* `--all`: deconcretize *all* specs that match the input spec. By default `spack deconcretize`
will complain about multiple matches, like `spack uninstall`.
This changes variant display to use a much more legible format, and to use screen space
much better (particularly on narrow terminals). It also adds color the variant display
to match other parts of `spack info`.
Descriptions and variant value lists that were frequently squished into a tiny column
before now have closer to the full terminal width.
This change also preserves any whitespace formatting present in `package.py`, so package
maintainers can make easer-to-read descriptions of variant values if they want. For
example, `gasnet` has had a nice description of the `conduits` variant for a while, but
it was wrapped and made illegible by `spack info`. That is now fixed and the original
newlines are kept.
Conditional variants are grouped by their when clauses by default, but if you do not
like the grouping, you can display all the variants in order with `--variants-by-name`.
I'm not sure when people will prefer this, but it makes it easier to tell that a
particular variant is/isn't there. I do think grouping by `when` is the better default.
Currently there's some hacky logic in the AppleClang compiler that makes
it also accept `gfortran` as a fortran compiler if `flang` is not found.
This is guarded by `if sys.platform` checks s.t. it only applies to
Darwin.
But on Linux the feature of detecting mixed toolchains is highly
requested too, cause it's rather annoying to run into a failed build of
`openblas` after dozens of minutes of compiling its dependencies, just
because clang doesn't have a fortran compiler.
In particular in CI where the system compilers may change during system
updates, it's typically impossible to fix compilers in a hand-written
compilers.yaml config file: the config will almost certainly be outdated
sooner or later, and maintaining one config file per target machine and
writing logic to select the correct config is rather undesirable too.
---
This PR introduces a flag `spack compiler find --mixed-toolchain` that
fills out missing `fc` and `f77` entries in `clang` / `apple-clang` by
picking the best matching `gcc`.
It is enabled by default on macOS, but not on Linux, matching current
behavior of `spack compiler find`.
The "best matching gcc" logic and compiler path updates are identical to
how compiler path dictionaries are currently flattened "horizontally"
(per compiler id). This just adds logic to do the same "vertically"
(across different compiler ids).
So, with this change on Ubuntu 22.04:
```
$ spack compiler find --mixed-toolchain
==> Added 6 new compilers to /home/harmen/.spack/linux/compilers.yaml
gcc@13.1.0 gcc@12.3.0 gcc@11.4.0 gcc@10.5.0 clang@16.0.0 clang@15.0.7
==> Compilers are defined in the following files:
/home/harmen/.spack/linux/compilers.yaml
```
you finally get:
```
compilers:
- compiler:
spec: clang@=15.0.7
paths:
cc: /usr/bin/clang
cxx: /usr/bin/clang++
f77: /usr/bin/gfortran
fc: /usr/bin/gfortran
flags: {}
operating_system: ubuntu23.04
target: x86_64
modules: []
environment: {}
extra_rpaths: []
- compiler:
spec: clang@=16.0.0
paths:
cc: /usr/bin/clang-16
cxx: /usr/bin/clang++-16
f77: /usr/bin/gfortran
fc: /usr/bin/gfortran
flags: {}
operating_system: ubuntu23.04
target: x86_64
modules: []
environment: {}
extra_rpaths: []
```
The "best gcc" is automatically default system gcc, since it has no
suffixes / prefixes.
This PR implements the concept of "default environment", which doesn't have to be
created explicitly. The aim is to lower the barrier for adopting environments.
To (create and) activate the default environment, run
```
$ spack env activate
```
This mimics the behavior of
```
$ cd
```
which brings you to your home directory.
This is not a breaking change, since `spack env activate` without arguments
currently errors. It is similar to the already existing `spack env activate --temp`
command which always creates an env in a temporary directory, the difference
is that the default environment is a managed / named environment named `default`.
The name `default` is not a reserved name, it's just that `spack env activate`
creates it for you if you don't have it already.
With this change, you can get started with environments faster:
```
$ spack env activate [--prompt]
$ spack install --add x y z
```
instead of
```
$ spack env create default
==> Created environment 'default in /Users/harmenstoppels/spack/var/spack/environments/default
==> You can activate this environment with:
==> spack env activate default
$ spack env activate [--prompt] default
$ spack install --add x y z
```
Notice that Spack supports switching (but not stacking) environments, so the
parallel with `cd` is pretty clear:
```
$ spack env activate named_env
$ spack env status
==> In environment named_env
$ spack env activate
$ spack env status
==> In environment default
```
This completes to `spack concretize`:
```
spack conc<tab>
```
but this still gets hung up on the difference between `concretize` and `concretise`:
```
spack -e . conc<tab>
```
We were checking `"$COMP_CWORD" = 1`, which tracks the word on the command line
including any flags and their args, but we should track `"$COMP_CWORD_NO_FLAGS" = 1` to
figure out if the arg we're completing is the first real command.
This PR adds support for including separate definitions from `spack.yaml`.
Supporting the inclusion of files with definitions enables user to make
curated/standardized collections of packages that can re-used by others.
* e4s ci: add exago +cuda, +rocm builds
* exago: rename 5-18-2022-snapshot to snapshot.5-18-2022
* disable exago +rocm for non-external rocm ci install
* note that hiop +rocm fails to find hip libraries when they are spack-installed
Credits to @ChristianKniep for advocating the idea of OCI image layers
being identical to spack buildcache tarballs.
With this you can configure an OCI registry as a buildcache:
```console
$ spack mirror add my_registry oci://user/image # Dockerhub
$ spack mirror add my_registry oci://ghcr.io/haampie/spack-test # GHCR
$ spack mirror set --push --oci-username ... --oci-password ... my_registry # set login credentials
```
which should result in this config:
```yaml
mirrors:
my_registry:
url: oci://ghcr.io/haampie/spack-test
push:
access_pair: [<username>, <password>]
```
It can be used like any other registry
```
spack buildcache push my_registry [specs...]
```
It will upload the Spack tarballs in parallel, as well as manifest + config
files s.t. the binaries are compatible with `docker pull` or `skopeo copy`.
In fact, a base image can be added to get a _runnable_ image:
```console
$ spack buildcache push --base-image ubuntu:23.04 my_registry python
Pushed ... as [image]:python-3.11.2-65txfcpqbmpawclvtasuog4yzmxwaoia.spack
$ docker run --rm -it [image]:python-3.11.2-65txfcpqbmpawclvtasuog4yzmxwaoia.spack
```
which should really be a game changer for sharing binaries.
Further, all content-addressable blobs that are downloaded and verified
will be cached in Spack's download cache. This should make repeated
`push` commands faster, as well as `push` followed by a separate
`update-index` command.
An end to end example of how to use this in Github Actions is here:
**https://github.com/haampie/spack-oci-buildcache-example**
TODO:
- [x] Generate environment modifications in config so PATH is set up
- [x] Enrich config with Spack's `spec` json (this is allowed in the OCI specification)
- [x] When ^ is done, add logic to create an index in say `<image>:index` by fetching all config files (using OCI distribution discovery API)
- [x] Add logic to use object storage in an OCI registry in `spack install`.
- [x] Make the user pick the base image for generated OCI images.
- [x] Update buildcache install logic to deal with absolute paths in tarballs
- [x] Merge with `spack buildcache` command
- [x] Merge #37441 (included here)
- [x] Merge #39077 (included here)
- [x] #39187 + #39285
- [x] #39341
- [x] Not a blocker: #35737 fixes correctness run env for the generated container images
NOTE:
1. `oci://` is unfortunately taken, so it's being abused in this PR to mean "oci type mirror". `skopeo` uses `docker://` which I'd like to avoid, given that classical docker v1 registries are not supported.
2. this is currently `https`-only, given that basic auth is used to login. I _could_ be convinced to allow http, but I'd prefer not to, given that for a `spack buildcache push` command multiple domains can be involved (auth server, source of base image, destination registry). Right now, no urllib http handler is added, so redirects to https and auth servers with http urls will simply result in a hard failure.
CAVEATS:
1. Signing is not implemented in this PR. `gpg --clearsign` is not the nicest solution, since (a) the spec.json is merged into the image config, which must be valid json, and (b) it would be better to sign the manifest (referencing both config/spec file and tarball) using more conventional image signing tools
2. `spack.binary_distribution.push` is not yet implemented for the OCI buildcache, only `spack buildcache push` is. This is because I'd like to always push images + deps to the registry, so that it's `docker pull`-able, whereas in `spack ci` we really wanna push an individual package without its deps to say `pr-xyz`, while its deps reside in some `develop` buildcache.
3. The `push -j ...` flag only works for OCI buildcache, not for others
Update Tcl modulefile template to simplify generated `append-path`,
`prepend-path` and `remove-path` commands and improve their readability.
If path element delimiter is colon character, do not set the `--delim`
option as it is the default delimiter value.
* ci: don't register detectable compilers
Cause they go out of sync...
* remove intel compiler, it can be detected too
* Do not run spack compiler find since compilers are registered in concretize job already
* trilinos: work around +stokhos +cuda +superlu-dist bug due to EMPTY macro
* gromacs +cp2k: build in CI
* libxsmm: x86 only
* attempt to fix dbcsr + new mpich
* use c11 standard
* gromacs: does not depend on dbcsr
* cp2k: build with cmake in CI, s.t. dbcsr is a separate package
* cp2k: cmake patches for config files and C/C++ std
* cp2k: remove unnecessary constraints due to patch
This adds a `SetupContext` class which is responsible for setting
package.py module globals, and computing the changes to environment
variables for the build, test or run context.
The class uses `effective_deptypes` which takes a list of specs (e.g. single
item of a spec to build, or a list of environment roots) and a context
(build, run, test), and outputs a flat list of specs that affect the
environment together with a flag in what way they do so. This list is
topologically ordered from root to leaf, so that one can be assured that
dependents override variables set by dependencies, not the other way
around.
This is used to replace the logic in `modifications_from_dependencies`,
which has several issues: missing calls to `setup_run_environment`, and
the order in which operations are applied.
Further, it should improve performance a bit in certain cases, since
`effective_deptypes` run in O(v + e) time, whereas `spack env activate`
currently can take up to O(v^2 + e) time due to loops over roots. Each
edge in the DAG is visited once by calling `effective_deptypes` with
`env.concrete_roots()`.
By marking and propagating flags through the DAG, this commit also fixes
a bug where Spack wouldn't call `setup_run_environment` for runtime
dependencies of link dependencies. And this PR ensures that Spack
correctly sets up the runtime environment of direct build dependencies.
Regarding test dependencies: in a build context they are are build-time
test deps, whereas in a test context they are install-time test deps.
Since there are no means to distinguish the build/install type test deps,
they're both.
Further changes:
- all `package.py` module globals are guaranteed to be set before any of the
`setup_(dependent)_(run|build)_env` functions is called
- traversal order during setup: first the group of externals, then the group
of non-externals, with specs in each group traversed topological (dependencies
are setup before dependents)
- modules: only ever call `setup_dependent_run_environment` of *direct* link/run
type deps
- the marker in `set_module_variables_for_package` is dropped, since we should
call the method once per spec. This allows us to set only a cheap subset of
globals on the module: for example it's not necessary to compute the expensive
`cmake_args` and w/e if the spec under consideration is not the root node to be
built.
- `spack load`'s `--only` is deprecated (it has no effect now), and `spack load x`
now means: do everything that's required for `x` to work at runtime, which
requires runtime deps to be setup -- just like `spack env activate`.
- `spack load` no longer loads build deps (of build deps) ...
- `spack env activate` on partially installed or broken environments: this is all
or nothing now. If some spec errors during setup of its runtime env, you'll only
get the unconditional variables + a warning that says the runtime changes for
specs couldn't be applied.
- Remove traversal in upward direction from `setup_dependent_*` in packages.
Upward traversal may iterate to specs that aren't children of the roots
(e.g. zlib / python have hundreds of dependents, only a small fraction is
reachable from the roots. Packages should only modify the direct dependent
they receive as an argument)
Improve how mirrors are used in gitlab ci, where we have until now thought
of them as only a string.
By configuring ci mirrors ahead of time using the proposed mirror templates,
and by taking advantage of the expressiveness that spack now has for mirrors,
this PR will allow us to easily switch the protocol/url we use for fetching
binary dependencies.
This change also deprecates some gitlab functionality and marks it for
removal in Spack 0.23:
- arguments to "spack ci generate":
* --buildcache-destination
* --copy-to
- gitlab configuration options:
* enable-artifacts-buildcache
* temporary-storage-url-prefix
Currently `spack env activate --with-view` exists, but is a no-op.
So, it is not too much of a breaking change to make this redundant flag
accept a value `spack env activate --with-view <name>` which activates
a particular view by name.
The view name is stored in `SPACK_ENV_VIEW`.
This also fixes an issue where deactivating a view that was activated
with `--without-view` possibly removes entries from PATH, since now we
keep track of whether the default view was "enabled" or not.
* Allow branching out of the "generic build" unification set
For cases like the one in https://github.com/spack/spack/pull/39661
we need to relax rules on unification sets.
The issue is that, right now, nodes in the "generic build" unification
set are unified together with their build dependencies. This was done
out of caution to avoid the risk of circular dependencies, which would
ultimately cause a very slow solve.
For build-tools like Cython, however, the build dependencies is masked
by a long chain of "build, run" dependencies that belong in the
"generic build" unification space.
To allow splitting on cases like this, we relax the rule disallowing
branching out of the "generic build" unification set.
* Fix issue with pure build virtual dependencies
Pure build virtual dependencies were not accounted properly in the
list of possible virtuals. This caused some facts connecting virtuals
to the corresponding providers to not be emitted, and in the end
lead to unsat problems.
* Fixed a few issues in packages
py-gevent: restore dependency on py-cython@3
jsoncpp: fix typo in build dependency
ecp-data-vis-sdk: update spack.yaml and cmake recipe
py-statsmodels: add v0.13.5
* Make dependency on "blt" of type "build"
* e4s amd64 gcc ci stack: sync with e4s-23.08
* e4s amd64 oneapi ci stack: sync with e4s-23.08
* e4s ppc64 gcc ci stack: sync with e4s-23.08
* add new ci stack: e4s amd64 gcc w/ external rocm
* add new ci stack: e4s arm gcc ci
* updates
* py-scipy: -fvisibility issue is resolved in 2023.1.0: #39464
* paraview oneapi fails
* comment out pkgs that fail to build on power
* fix arm stack name
* fix cabana +cuda specification
* comment out failing spces
* visit fails build on arm
* comment out slepc arm builds due to make issue
* comment out failing dealii arm builds
This PR adds a new audit sub-command to check that detection of relevant packages
is performed correctly in a few scenarios mocking real use-cases. The data for each
package being tested is in a YAML file called detection_test.yaml alongside the
corresponding package.py file.
This is to allow encoding detection tests for compilers and other widely used tools,
in preparation for compilers as dependencies.
* e4s cray rhel stack: expand to full spec list
* comment out gasnet; require %gcc for unzip
* require openblas@0.3.20 to get around %cce error; follow up with issue report
* comment out failing specs;
* comment out axom and xyce due to errors
* improve clarity of failing specs
* Add OIDC tokens to gitlab-ci jobs
This should allow us to start issuing just-in-time generated
credentials for CI jobs that need to modify binary mirrors. The "aud"
claim of the token describes what the token is allowed to do. The
claim is verified against a set of rules on the IAM role using signed
information from GitLab. See spack-infrastructure for the claim
verification logic.
---------
Co-authored-by: Scott Wittenburg <scott.wittenburg@kitware.com>
This commit replaces the internal representation of deptypes with `int`, which is more compact
and faster to operate with.
Double loops like:
```
any(x in ys for x in xs)
```
are replaced by constant operations bool(xs & ys), where xs and ys are dependency types.
Global constants are exposed for convenience in `spack.deptypes`
Currently the configuration of the pipeline is such that
there are multiple "optimal" solutions. This is due to
the pipeline making ~lld the default for LLVM, but leaving
+libomptarget from package.py
Since LLVM recipe has a:
conflicts("~lld", "+libomptarget")
clingo is forced to change one of the two defaults, and
the penalty for doing so is the same for each. Hence, it
is random whether we'll get +libomptarget+lld
or ~libomptarget~lld.
This fixes it by changing also the default for libomptarget.
Instead of pointing to the image on DockerHub, which rate limits us and
causes pipeline failures durying busy times, use the version at ghcr.
And we might as well use the ghcr version everywhere else too.
Smart alias completion introduced in #39499 wasn't as smart as it needed to be, and
would complete any invalid command prefix and some env names with alias names.
- [x] don't complete aliases if there are no potential completions
e.g., don't convert `spack isnotacommand` -> `spack concretize`
- [x] don't complete with an aliases if we're not looking at a top-level subcommand.
* Perform external spec detection with multiple workers
The logic to perform external spec detection has been refactored
into classes. These classes use the GoF "template" pattern to account
for the small differences between searching for "executables" and
for "libraries", while unifying the larger part of the algorithm.
A ProcessPoolExecutor is used to parallelize the work.
* Speed-up external find by tagging detectable packages automatically
Querying packages by tag is much faster than inspecting the repository,
since tags are cached. This commit adds a "detectable" tag to every
package that implements the detection protocol, and external detection
uses it to search for packages.
* Pass package names instead of package classes to workers
The slowest part of the search is importing the Python modules
associated with candidate packages. The import is done serially
before we distribute the work to the pool of executors.
This commit pushes the import of the Python module to the job
performed by the workers, and passes just the name of the packages
to the executors.
In this way imports can be done in parallel.
* Rework unit-tests for Windows
Some unit tests were doing a full e2e run of a command
just to check a input handling. Make the test more
focused by just stressing a specific function.
Mark as xfailed 2 tests on Windows, that will be fixed
by a PR in the queue. The tests are failing because we
monkeypatch internals in the parent process, but the
monkeypatching is not done in the "spawned" child
process.
* Write timing information for installs from cache
* CI: aggregate and upload install_times.json to artifacts
* CI: Don't change root directory for artifact generation
* Flat event based timer variation
Event based timer allows for easily starting and stopping timers without
wiping sub-timer data. It also requires less branching logic when
tracking time.
The json output is non-hierarchical in this version and hierarchy is
less rigidly enforced between starting and stopping.
* Add and write timers for top level install
* Update completion
* remove unused subtimer api
* Fix unit tests
* Suppress timing summary option
* Save timers summaries to user_data artifacts
* Remove completion from fish
* Move spack python to script section
* Write timer correctly for non-cache installs
* Re-add hash to timer file
* Fish completion updates
* Fix null timer yield value
* fix type hints
* Remove timer-summary-file option
* Add "." in front of non-package timer name
---------
Co-authored-by: Harmen Stoppels <harmenstoppels@gmail.com>
Co-authored-by: Harmen Stoppels <me@harmenstoppels.nl>
These commands are currently broken on powershell (Windows) due to
improper use of the InvokeCommand commandlet and a lack of direct
support for the `--pwsh` argument in `spack load`, `spack unload`,
and `spack env deactivate`.
Setting the undocumented variable SPACK_CONCRETIZER_REQUIRE_CHECKSUM
now causes the solver to avoid accounting for versions that are not checksummed.
This feature is used in CI to avoid spurious concretization against e.g. develop branches.
`compgen -W` does not behave the same way in zsh as it does in bash; it seems not to
actually generate the completions we want.
- [x] add a zsh equivalent and `_compgen_w` to abstract it away
- [x] use `_compgen_w` instead of `compgen -W`
Bash completion is now smarter about handling aliases. In particular, if all completions
for some input command are aliased to the same thing, we'll just complete with that thing.
If you've already *typed* the full alias for a command, we'll complete the alias.
So, for example, here there's more than one real command involved, so all aliases are
shown:
```console
$ spack con
concretise concretize config containerise containerize
```
Here, there are two possibilities: `concretise` and `concretize`, but both map to
`concretize` so we just complete that:
```console
$ spack conc
concretize
```
And here, the user has already typed `concretis`, so we just go with it as there is only
one option:
```console
spack concretis
concretise
```
From a user:
> Aargh.
> ```
> ==> Error: concretise is not a recognized Spack command or extension command; check with `spack commands`.
> ```
To make things easier for our friends in the UK, this adds `concretise` and
`containerise` aliases for the `spack concretize` and `spack containerize` commands.
- [x] add aliases
- [x] update completions
* VTK: Add patch for python 3.8 support
* CI: Re-enable VisIt in CI
* Configure spec matrix for stack with VisIt
* Add pugixml dep for 8.2.0
* Make VTK and ParaView consistent on proj dep
* OpenMPI 3: provides MP support by default
* Add details on proj dep in ParaView
* Add python 3.8 to test mock repo
* Patches to get VisIt VTK interface
* CI: Disable VisIt with GUI in DAV
* AMReX: 23.06+ Multi-Dim Support
This updated the Spack package to allow to install AMReX, modules of
AMReX in E4S deployments and dependent packages with support for
multiple dimensions. Due to an upstream change in AMReX, we do not
longer need to ship three, binary incompatible package variants.
* [E4S] oneAPI AMReX < 23.06 Variant
Work-around the auto-concretization to the multi-dim of `dimensions`,
which only in 23.06+ became a multi-variant.
* e4s cray rhel ci: temporarily disable amrex build until spurious ci failure can be resolved
---------
Co-authored-by: eugeneswalker <eugenesunsetwalker@gmail.com>
Refactor gitlab ci configs so that mac and cray jobs can reuse as much higher level
configuration as possible.
* CI: remove redundant sections
* CI: Include base linux CI configs in cray stacks
Relocation and runner mapping is consistent between cray and linux runners.
* Export user cache path in before script
* CI: add GPG root for mac runners
* Disable user configs
Metal runners share a ~ directory
* Disable user config and add configs in activate env
* CI: Refactor ci reproducer
* Autostart container
* Reproducer paths match CI paths
* Generate start scripts for docker and reproducer
* CI: Add interactive and gpg options to reproduce-build
* Interactive will determine if the docker container persists
after running reproduction.
* GPG path/url allow downloading GPG keys needed for binary
cache download validation. This is important for running
reproducer for protected CI jobs.
* Add exit_on_failure option to CI scripts
* CI: Add runtime option for reproducer
`spack buildcache list` did not have a way to display the namespace of
packages in the buildcache. This PR adds that functionality.
For consistency's sake, it moves the `-N/--namespace` arg definition to
the `common/arguments.py` and modifies `find`, `solve`, `spec` to use
the common definition.
Previously, `find` was using `--namespace` (singular) to control whether
to display the namespace (it doesn't restrict the search to that
namespace). The other commands were using `--namespaces` (plural). For
backwards compatibility and for consistency with `--deps`, `--tags`,
etc, the plural `--namespaces` was chosen. The argument parser ensures
that `find --namespace` will continue to behave as before.
Co-authored-by: Harmen Stoppels <me@harmenstoppels.nl>
* Add rewrite of spack checksum to include --verify and better add versions to package.py files
* Fix formatting and remove unused import
* Update checksum unit-tests to correctly test multiple versions and add to package
* Remove references to latest in stage.py
* Update bash-completion scripts to fix unit tests failures
* Fix docs generation
* Remove unused url_dict argument from methods
* Reduce chance of redundant remote_versions work
* Add print() before tty.die() to increase error readablity
* Update version regular expression to allow for multi-line versions
* Add a few unit tests to improve test coverage
* Update command completion
* Add type hints to added functions and fix a few py-lint suggestions
* Add @no_type_check to prevent mypy from failing on pkg.versions
* Add type hints to format.py and fix unit test
* Black format lib/spack/spack/package_base.py
* Attempt ignoring type errors
* Add optional dict type hint and declare versions in PackageBase
* Refactor util/format.py to allow for url_dict as an optional parameter
* Directly reference PackageBase class instead of using TypeVar
* Fix comment typo
---------
Co-authored-by: Tamara Dahlgren <dahlgren1@llnl.gov>
* commands: provide more information to Command
* fish: Add script to generate fish completion
* fish: auto prepend `spack` command to avoid duplication
* fish: impove completion generation code readability
* commands: replace match-case with if-else
* fish: fix optspec variable name prefix
* fish: fix return value in get_optspecs
* fish: fix return value in get_optspecs
* format: split long line and trim trailing space
* bugfix: replace f-string with interpolation
* fish: compete more specs and some fixes
* fish: complete hash spec starts with /
* fish: improve compatibility
* style: trim trailing whitespace
* commands: add fish to update args and update tests
* commands: add fish completion file
* style: merge imports
* fish: source completion in setup-env
* fish: caret only completes dependencies
* fish: make sure we always get same order of output
* fish: spack activate
only show installed packages that have extensions
* fish: update completion file
* fish: make dict keys sorted
* Blacken code
* Fix bad merge
* Undo style changes to setup-env.fish
* Fix unit tests
* Style fix
* Compatible with fish_indent
* Use list for stability of order
* Sort one more place
* Sort more things
* Sorting unneeded
* Unsort
* Print difference
* Style fix
* Help messages need quotes
* Arguments to -a must be quoted
* Update types
* Update types
* Update types
* Add type hints
* Change order of positionals
* Always expand help
* Remove shared base class
* Fix type hints
* Remove platform-specific choices
* First line of help only
* Remove unused maps
* Remove suppress
* Remove debugging comments
* Better quoting
* Fish completions have no double dash
* Remove test for deleted class
* Fix grammar in header file
* Use single quotes in most places
* Better support for remainder nargs
* No magic strings
* * and + can also complete multiple
* lower case, no period
---------
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Use curly braces instead of quotes to enclose value or text in Tcl
modulefile. Within curly braces Tcl special characters like [, ] or $
are treated verbatim whereas they are evaluated within quotes.
Curly braces is Tcl recommended way to enclose verbatim content [1].
Note: if curly braces charaters are used within content, they must be
balanced. This point has been checked against current repository and no
unbalanced curly braces has been spotted.
Fixes#24243
[1] https://wiki.tcl-lang.org/page/Tcl+Minimal+Escaping+Style
Add support for conflict directives in Lua modulefile like done for Tcl
modulefile.
Note that conflicts are correctly honored on Lmod and Environment
Modules <4.2 only if mutually expressed on both modulefiles that
conflict with each other.
Migrate conflict code from Tcl-specific classes to the common part. Add
tests for Lmod and split the conflict test case in two.
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
Allow the following formats:
```yaml
mirrors:
name: <url>
```
```yaml
mirrors:
name:
url: s3://xyz
access_pair: [x, y]
```
```yaml
mirrors:
name:
fetch: http://xyz
push:
url: s3://xyz
access_pair: [x, y]
```
And reserve two new properties to indicate the mirror type (e.g.
mirror.spack.io is a source mirror, not a binary cache)
```yaml
mirrors:
spack-public:
source: true
binary: false
url: https://mirror.spack.io
```
* ci: run spack list in power ci
Let's see if Spack itself is the bottleneck in CI...
* rebuild curl in CI
* more of the same please!
* drop the profiler
* undo rebuildme test in ci variant
* add comment for posterity
* enable profiling
* trigger CI
* See how it goes now that perf regressions are fixed on develop
* try shorter poll intervals
* Revert "try shorter poll intervals"
This reverts commit d60c34ad3eceead0c13a5277cf8e783fd42b7458.
* Remove spec.format call in Database._get_matching_spec_key
* once more in ci please
* undo irrelevant changes
* run spack list in before script
* test in ci
* -:
* Undo CI testing
Refactor `TermTitle` into `InstallStatus` and use it to show progress
information both in the terminal title as well as inline. This also
turns on the terminal title status by default.
The inline output will look like the following after this change:
```
==> Installing m4-1.4.19-w2fxrpuz64zdq63woprqfxxzc3tzu7p3 [4/4]
```
People frequently ask us how to pipe `spack find` output to other commands, and we tell
them to do things like this:
```console
$ spack find --format "/{hash}" | spack uninstall -ay
```
Sometimes users don't know about hash references and come up with potentially ambiguous
formulations like this:
```console
spack find --format {name}@{version}%{compiler} | spack uninstall -ay
```
Since this is a common enough thing to want to do, and to make it more obvious how, this
PR adds a `-H` / `--hashes` as a shortcut, so you can now just do:
```console
spack find -H | spack uninstall -ay
```
* openssl: prefer 3.x
This PR is not intended to be merged immediately, but it would be good
to see what packages fail to build in CI so that we can get proper
version constraints on openssl (before all packages update and support
both openssl 1 and 3)
* Disable assembly for 3.x %oneapi
* cmake: depend on spack curl, to deal with curl - openssl compat
* also make zlib external
* remove overly strict & unsafe requirement on py-cryptographty patch version number
* update openssl compat bounds in py-cryptography
* smaller diff
* Make libssh2 an autotools/cmake package
* fix weird upperbound in libssh2 as there is not openssl v2
* libssh2: pc file lists plain -lssl -lcrypto w/o leading -L flag, confusing libgit2 parsing of pkg-config output
* Actually fix the issue in libssh2: its pc file looks broken
PowerShell requires explicit shell and env support in Spack.
This is due to the distinct differences in shell interactions between
cmd and pwsh. Add a doskey in pwsh piping 'spack' commands to a
powershell script similar to the sh function 'spack'. Add
support for PowerShell-specific shell interactions from Spack
(set/unset shell variables).
* WarpX 23.06
Update WarpX and related Python packages to the lastest releases.
WarpX 23.06 introduces multi-dimension support in a single package,
which will ease deployment in E4S et al. that can ship now a single,
full-feature module/package that is NOT incompatible with itself
anymore.
* e4s ci stacks: multiple specs for each dim variant no longer required
* [@spackbot] updating style on behalf of ax3l
* WarpX: Update CMake CLI and Test/Check
* Add Missing `build-directory`
* [@spackbot] updating style on behalf of ax3l
* Remove `build_directory` again
---------
Co-authored-by: eugeneswalker <eugenesunsetwalker@gmail.com>
Co-authored-by: ax3l <ax3l@users.noreply.github.com>
Update Tcl modulefile template to use the `depends-on` command to
autoload modules if Lmod is the current module tool.
Autoloading modules with `module load` command in Tcl modulefile does
not work well for Lmod at some extend. An attempt to unload then load
designated module is performed each time such command is encountered. It
may lead to a load storm that may not end correctly with large number of
module dependencies.
`depends-on` command should be used for Lmod instead of `module load`,
as it checks if module is already loaded, and does not attempt to reload
this module.
Lua modulefile template already uses `depends_on` command to autoload
dependencies. Thus it is already considered that to use Lmod with Spack,
it must support `depends_on` command (version 7.6+).
Environment Modules copes well with `module load` command to autoload
dependencies (version 3.2+). `depends-on` command is supported starting
version 5.1 (as an alias of `prereq-all` command) which was relased last
year.
This change introduces a test to determine if current module tool that
evaluates modulefile is Lmod. If so, autoload dependencies are defined
with `depends-on` command. Otherwise `module load` command is used.
Test is based on `LMOD_VERSION_MAJOR` environment variable, which is set
by Lmod starting version 5.1.
Fixes#36764
Update modulefile templates to append a trailing delimiter to MANPATH
environment variable, if the modulefile sets it.
With a trailing delimiter at ends of MANPATH's value, man will search
the system man pages after searching the specific paths set.
Using append-path/append_path to add this element, the module tool
ensures it is appended only once. When modulefile is unloaded, the
number of append attempt is decreased, thus the trailing delimiter is
removed only if this number equals 0.
Disclaimer: no path element should be appended to MANPATH by generated
modulefiles. It should always be prepended to ensure this variable's
value ends with the trailing delimiter.
Fixes#11355.
The pcluster image has am internal buildcache without an index.
Also, we need to force reuse to avoid rebuilding GCC, since the default is
to only reuse dependencies - and that is subject to changes in the GCC
recipe.
* e4s oneapi ci: use official intel oneapi-derived runner image
* update oneapi image
* tau builds ok, but only with libdrm - comment out for now, follow up with pr later
* e4s cray ci stack
* e4s ci: add cray
* add zen4 tag
* WIP: new defintions just for cray
* updates
* remove ci signing job overrride, not necessary
* echo $PATH and show modules loaded
* add mirror
* add external def for cray-libsci
* comment out quantum-espresso
* use /etc/protected-runner as key path
* cray ci stack: do not remove tags: [spack, public]
* make cray stack composable
* generate job should run on public tagged runner, override default config:install_tree:root
* CI: Use relative path in default script
* CI: Use relative includes paths for shell runners
* Use concrete_env_dir for relpath
* ml-darwin-aarch64-mps: jax has bazel codesign issue
---------
Co-authored-by: Scott Wittenburg <scott.wittenburg@kitware.com>
Co-authored-by: Ryan Krattiger <ryan.krattiger@kitware.com>
* llvm: replace +omp_as_runtime with omp=runtime
* llvm: fetch 'libomp-libflags-as-list.patch' from upstream repo
* llvm: replace 'llvm14-hwloc-ompd.patch' with the official fix from upstream repo
* llvm: fix-up for the black reformatting
* llvm: fetch 'constexpr_longdouble.patch' from upstream repo
* llvm: optionally build libcxx as a runtime
* llvm: fetch 'llvm5-sanitizer-ustat.patch' from upstream repo
* llvm: update 'sanitizer-ipc_perm_mode.patch'
* llvm: refactor compiler conflicts when libcxx=project
* llvm: fetch 'llvm_python_path.patch' from upstream repo
* llvm: update comments and condition for 'xray_buffer_queue-cstddef.patch'
* llvm: optionally build compiler-rt as a runtime
* llvm: fetch 'lldb_external_ncurses-10.patch' from upstream repo
* llvm: fetch 'llvm_py37.patch' from upstream repo
* llvm: rename variant 'internal_unwind' to 'libunwind'
* llvm: optionally build libunwind as a runtime
* llvm: extend the list of maintainers
* llvm: allow for explicit '~clang~flang~libomptarget~lldb~omp_debug~z3'
* llvm: fetch 'llvm5-lld-ELF-Symbols.patch' from FreeBSD port repo
* llvm: fetch most of 'missing-includes.patch' from upstream repo and reuse 'llvm-gcc11.patch'
* llvm: regroup patches for missing include directives and drop compiler constraints for them
* llvm: fetch 'llvm-gcc11.patch' from upstream repo
* llvm: fetch 'no_cyclades.patch' from upstream repo
* llvm: update comments and condition for 'no_cyclades9.patch'
* llvm: rename variant 'omp' to 'openmp'
* llvm: constrain and rename variant 'omp_tsan' to 'libomp_tsan'
* llvm: rename variant 'omp_debug' to 'libomptarget_debug'
* llvm: do not apply same patch twice
* llvm: constrain and document the '*-thread.patch' patches
* llvm: document the '~lld+libomptarget' conflict
* llvm: update comments for the 'D133513.diff' patch
fa7719a changed syntax for specifying exact versions, which are
required for some compiler specs (including those read as part
of parsing a Cray manifest). This fixes that and also makes a
couple other improvements to manifest parsing.
* Instantiate compiler specs with exact versions (fixes#37893)
* fix slingshot network detection (CPE 22.10+ has libcxi.so
in /usr/lib64)
* "spack external find": add arg to ignore default dir for cray
manifests
* Add macOS ML CI stacks
* torchmeta is no longer maintained and requires ancient PyTorch
* Add MXNet
* update darwin aarch64 stacks
* add darwin-aarch64 scoped config.yaml
* remove unnecessary cleanup job
* fix specifications
* fix labels
* fix labels
* fix indent on tags specification
* no tags for trigger jobs
* try overriding tags in stack spack.yaml
* do not use CI_STACK_CONFIG_SCOPES
* incorporate config:install_tree:root: overrides and compiler defs
* copy relevant ci-scoped config settings directly into stack spack.yaml
* remove build-job-remove
* spack ci generate: add debug flag
* include cdash config directly in stack spack.yaml
* customize build-job script section to avoid absolute paths
* add any-job specification
* tags: use aarch64-macos instead of aarch64
* generate tags: use aarch64-macos instead of aarch64
* do not add morepadding
* use shared mirror; comment out known failures
* remove any-job
* nproc || true
* comment out specs failing due to bazel from cache codesign issue
---------
Co-authored-by: eugeneswalker <eugenesunsetwalker@gmail.com>
* [pcluster pipeline] Use local buildcache instead of upstream spack
Spack currently does not relocate compiler references from upstream spack
installations. When using a buildcache we don't need an upstream spack.
* gcc needs to be installed via postinstall to get correct deps
* quantum-espresso@gcc@12.3.0 returns ICE on neoverse_{n,v}1
* Force gitlab to pull the new container
* Revert "Force gitlab to pull the new container"
This reverts commit 3af5f4cd88.
Seems the gitlab version does not yet support "pull_policy" in .gitlab-ci.yml
* Gitlab keeps picking up wrong container. Renaming
* Update containers once more after failed build
Add aws-plcuster[-aarch64] stacks. These stacks build packages defined in
https://github.com/spack/spack-configs/tree/main/AWS/parallelcluster
They use a custom container from https://github.com/spack/gitlab-runners which
includes necessary ParallelCluster software to link and build as well as an
upstream spack installation with current GCC and dependencies.
Intel and ARM software is installed and used during the build stage but removed
from the buildcache before the signing stage.
Files `configs/linux/{arch}/ci.yaml` select the necessary providers in order to
build for specific architectures (icelake, skylake, neoverse_{n,v}1).
* CI: Expand E4S ROCm stack to include missing DaV packages
Ascent: Fixup for VTK-m with Kokkos backend
* DaV SDK: Removed duplicated openmp variant for ascent
* Drop visit and add conflict for Kokkos
* E4S: Drop ascent from CUDA builds
Ensure that requirements `packages:*:require:@x` and preferences `packages:*:version:[x]`
fail concretization when no version defined in the package satisfies `x`. This always holds
except for git versions -- they are defined on the fly.
* gitlab ci: release fixes and improvements
- use rules to reduce boilerplate in .gitlab-ci.yml
- support copy-only pipeline jobs
- make pipelines for release branches rebuild everything
- make pipelines for protected tags copy-only
* gitlab ci: remove url changes used in testing
* gitlab ci: tag mirrors need public key
Make sure that mirrors associated with release branches and tags
contain the public key needed to verify the signed binaries. This
also ensures that when stack-specific mirror contents are copied
to the root, the root mirror has the public key as well.
* review: be more specific about tags, curl flags
* Make the check in ci.yaml consistent with the .gitlab-ci.yml
---------
Co-authored-by: Ryan Krattiger <ryan.krattiger@kitware.com>
The flags --mirror-name / --mirror-url / --directory were deprecated in
favor of just passing a positional name, url or directory, and letting spack
figure it out.
---------
Co-authored-by: Scott Wittenburg <scott.wittenburg@kitware.com>
`spack buildcache create` is a misnomer cause it's the only way to push to
an existing buildcache (and it in fact calls binary_distribution.push).
Also we have `spack buildcache update-index` but for create the flag is
`--rebuild-index`, which is confusing (and also... why "rebuild"
something if the command is "create" in the first place, that implies it
wasn't there to begin with).
So, after this PR, you can use either
```
spack buildcache create --rebuild-index
```
or
```
spack buildcache push --update-index
```
Also, alias `spack buildcache rebuild-index` to `spack buildcache
update-index`.
Paths with spaces are an issue on Windows and our current powershell
scripts are not sufficiently hardended against their use.
This PR removes promlematic commandlets that do not work well with paths
with spaces and adds escape quotes in other areas where this could be an
issue.
* DaV SDK: Enable ParaView raytracing with in SDK
* CI: Drop swr testing from Data Vis SDK
* ISPC: extend LLVM requirement to main
* DaV SDK: Disallow concretizing develop unifyfs
No longer needed after mochi-margo patch
* CI: Fixup docs for bootstrap.
* CI: Add compatibility shim
* Add an update method for CI
Update requires manually renaming section to `ci`. After
this patch, updating and using the deprecated `gitlab-ci` section
should be possible.
* Fix typos in generate warnings
* Fixup CI schema validation
* Add unit tests for legacy CI
* Add deprecated CI stack for continuous testing
* Allow updating gitlab-ci section directly with env update
* Make warning give good advice for updating gitlab-ci
* Fix typo in CI name
* Remove white space
* Remove unneeded component of deprected-ci
* ECP-SDK: enable hdf5 VOL adapters
- When +hdf5, enable VOL adapters suitable for the SDK.
- Each VOL package must prepend to the HDF5_PLUGIN_PATH.
- hdf5: 1.13.3 will break existing VOL packages, constrain
VOLs related to SDK and add note to keep 1.13.2 available.
- hdf5-vol-async:
- Do not set HDF5_VOL_CONNECTOR, consumers must opt-in.
- Enforce DAG constraints on MPI to require threaded version.
- Depend on an explicit version of argbots to relax
concretization issues in other spack environments.
- paraview: fix compiler flag usage for the 110 ABI (followup to #33617).
* ECP Data and ViS: Add constraits for HDF5 VOLS
* CI: HDF5 1.14 builds without VisIt
* hdf5-vol-async: Update docs string
---------
Co-authored-by: Stephen McDowell <stephen.mcdowell@kitware.com>
- Update default image to Ubuntu 22.04 (previously was still Ubuntu 18.04)
- Optionally use depfiles to install the environment within the container
- Allow extending Dockerfile Jinja2 template
- Allow extending Singularity definition file Jinja2 template
- Deprecate previous options to add extra instructions
Update tcl and lmod modulefile template to provide more information on
help message (name, version and target) like done on whatis for lmod
modulefiles.
Adapt tcl and lmod modulefile templates to generate append-path or
remove-path commands in modulefile when respectively append_flags or
remove_flags commands are defined in package for run environment.
Fixes#10299.
Simplify environment modification block in modulefile Tcl template by
always setting a path delimiter to the prepend-path, append-path and
remove-path commands.
Remove --delim option to the setenv command as this command does not
allow such option.
Update test_prepend_path_separator test to explicitly check the 6
path-like commands that should be present in generated modulefile.
Example one:
```
spack install --add x y z
```
is equivalent to
```
spack add x y z
spack concretize
spack install --only-concrete
```
where `--only-concrete` installs without modifying spack.yaml/spack.lock
Example two:
```
spack install
```
concretizes current spack.yaml if outdated and installs all specs.
Example three:
```
spack install x y z
```
concretizes current spack.yaml if outdated and installs *only* concrete
specs in the environment that match abstract specs `x`, `y`, or `z`.
Adapt tcl modulefile template to call "module load" on autoload
dependency without testing if this dependency is already loaded or not.
The is-loaded test is not necessary, as module commands know how to cope
with an already loaded module. With environment-modules 4.2+ (released
in 2018) it is also important to have this "module load" command even if
dependency is already loaded in order to record that the modulefile
declares such dependency. This is important if you want to keep a
consistent environment when a dependent module is unloaded.
The "Autoloading" verbose message is also removed as recent module
commands will report such information to the user (depending on the
verbosity configured for the module command).
Such change has been test successfully with Modules 3.2 (EL7), 4.5 (EL8)
and 5.2 (latest) and also with Lmod 7 and 8 (as it is mentionned in
Spack docs that Lmod can be used along with tcl modules). Dependencies
are correctly loaded or unloaded, whether they are loaded/unloaded or
not.
This change fixes Tcl quoting issue introduced in #32853.
Fixes#19155.
* py-pytorch-lightning: add v2.0.0
* py-lightning-utilities: add v0.8.0
* Update all PyTorch packages
* Open-CE does not yet have patches for PyTorch 2 on ppc64le
