* Add conflict between NVSHMEM and cuFFTMp for GROMACS package
These don't work in the same build configuration.
* [@spackbot] updating style on behalf of mabraham
* Update package.py
Also constrain NVSHMEM appropriately
* Update var/spack/repos/builtin/packages/gromacs/package.py
Co-authored-by: Andrey Alekseenko <al42and@gmail.com>
* Update package.py
* [@spackbot] updating style on behalf of mabraham
* Update package.py
* Update package.py
* Update package.py
* [@spackbot] updating style on behalf of mabraham
---------
Co-authored-by: mabraham <mabraham@users.noreply.github.com>
Co-authored-by: Christoph Junghans <christoph.junghans@gmail.com>
Co-authored-by: Andrey Alekseenko <al42and@gmail.com>
Change the signature of Spec.from_detection to set the
external prefix, and the external modules, if they are
present.
Delete "spack.package_prefs.spec_externals" since it
is unused.
This context manager was used to prevent detecting a platform
as "cray". Since now Cray machines are detected as linux, we can
remove the context manager.
This commit adds version 0.73.0 of the detray package. As this version
drops support for pre-C++20 standards, I had to update the `cxxstd`
variant logic.
Right now if you run `spack ci generate` you get a warning about CDash credentials even
if there's no CDash configuration specified. We should only warn if there was actually a
CDash config.
Signed-off-by: Todd Gamblin <tgamblin@llnl.gov>
Source mirrors store entries by digest and add a human readable alias of the
form 'name-version'. If no digest is available, the alias is used as the primary
storage location.
Spack erroneously fetches by alias when the digest path does not exist. This is
problematic if `version(..., sha256=...)` changes in package.py, and the mirror
is populated with the old shasum. That would result in an error when a digest
is available, but in case of git versions with a modified commit sha, the wrong
sources would be fetched without error. With this PR, only the digest path is
used, not the alias, in case a digest is available. This is also a small performance
optimization, as the number of request is halved for mirrors that don't contain
the sources.
Further, for git sources the tag was used as a digest, but this is a moving
target. Only commit sha is used now.
Also whenever the alias already existed, Spack used to keep it in place when
updating the mirror cache, which means that aliases would always point to
outdated mirror entries whenever digests are modified. With this PR the alias
is moved in place.
Lastly, fix a recent regression where `Stage.disable_mirrors` disabled mirrors
but not the local download cache, which was the intention.
* VTK-m: Point to github mirror for source tarball
The gitlab.kitware.com source location seems to have intermittent
network issues. Switching the to mirror hosted at Github may alleviate
some of the timeouts.
* Update sha256 for GitHub tarballs
---------
Co-authored-by: Zack Galbreath <zack.galbreath@kitware.com>
* davix: add versions 0.8.2-0.8.7 and dependencies
This commit adds new versions 0.8.2-0.8.7 of the davix package, and it
also improves the handling of embedded packages. Davix will try to build
libcurl from its own embedded version of that code, which doesn't mesh
well with Spack's design philosophy, so I've changed the CMake
configuration to disallow the builtin libcurl and use a Spack dependency
instead. Up to version 0.8.7, RapidJSON was also builtin, but version
0.8.7 allows users to specify that they want to use a pre-installed
version of RapidJSON, so this commit also adds that as a dependency for
versions 0.8.7:.
* Fix old versions
* acts: add v36.0.0, v36.1.0 and fixes
This commit makes several changes to the Acts repository, namely:
1. It adds versions 36.0.0 and 36.1.0.
2. It adds the traccc plugin and related dependencies.
3. It updates the version requirements of some dependencies.
4. It adds the Geant4 module of GeoModel.
5. It updates the C++ standard requirement.
6. It adds a new variant determining the scalar type to use.
This commit supercedes #45851. Thanks @jmcarcell for the version
updates; I have added you as co-author.
Co-authored-by: Juan Miguel Carceller <22276694+jmcarcell@users.noreply.github.com>
* Updates
* alphabetic cmake args
---------
Co-authored-by: Juan Miguel Carceller <22276694+jmcarcell@users.noreply.github.com>
* Add missing MultiMethodMeta metaclass in builders
and remove the Python 2 fallback option in favor of hard errors to catch
similar issues going forward.
The fallback option can cause about 10K stat calls due to use of
`realpath` in the inspect module, depending on how deep Spack itself is
nested in the file system, which is ... undesirable.
* code shuffling to avoid circular import
* more reshuffling
* move reserved variant names into variants module
Currently, the llvm-amdgpu package doesn't compile on MacOS, but it is
also not marked as a conflict. This causes problems because it seems
that Spack is very happy to pull in llvm-amdgpu as the default package
to satisfy any virtual libllvm dependency, which can cause dependent
specs to fail to install on MacOS. This commit marks a conflict between
this llvm package and the Darwin platform.
* root: set +webgui~http conflict from @6.28.12:
Currently, the ROOT spec correctly identifies a conflict between +webgui
and ~http, but this conflict is marked as affecting @6.29.00: only. As a
matter of fact, ROOT 6.28.12 is also affected. This commit, therefore,
updates the when clause on the conflict to @6.28.12:.
* Remove when clause entirely
* oops
* Adds an MSBuild system + Builder to the icu4c package
* Adds custom install method as MSBuild system does not vendor an
install target
* The cxxstd variant is not supported on Windows (there are no config
options you use to tell the build system what cxx standard to
build against), so the variant definition was updated to occur
everywhere except Windows
Also, this commit defines the c/cxx..._flag properties of the MSVC
compiler (although they are not used by `icu4c` and not strictly
necessary to bundle with this PR).
This commit adds a dependency on GeoModel 4.6.0 when the GeoModel plugin
is enabled. Note that the dependency is upgraded to 6.3.0 in Acts
36.1.0, but that will need to be covered in #45851.
* geomodel: add versions 5.1.0-6.4.0
This PR adds new versions 5.1.0 through 6.4.0 of the geomodel package.
It also updates the CMake configuration to use the `define_from_variant`
mechanism and it adds me as a maintainer.
* Undo cmake change
The avx2 version can be downloaded from the ORCA [forum](https://orcaforum.kofo.mpg.de/app.php/dlext/?view=detail&df_id=214#).
The version is named `avx2-6.0.0` (as opposed to the more
natural-looking `6.0.0-avx2`) to avoid the avx2 version shadowing the
non-avx2 one. Definitely open for better suggestion.
* hsakmt-roct: new test API
* hsakmt-roct: minor change to check_install script variable name
---------
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
* parallel-netcdf: new test API
* parallel-netcdf: fix test args and tweak docstring and variables
---------
Co-authored-by: Tamara Dahlgren <dahlgren1@llnl.gov>
* WarpX: Python on pyAMReX
Long overdue update for WarpX: in 2024, we updated our Python
bindings to rely on the new pyAMReX package. This deprecates the old
`py-warpx` package and adds a new dependency and variant to WarpX.
Also deprecates old versions that we will not continue to support.
* Update Cloud/E4S Pipelines for WarpX
`py-warpx` is replaced by `warpx +python`
oneAPI does not support IPO/LTO: diable for `py-amrex` even though
pybind11 strongly encourages it.
* Add `+python` variant
* `esmf` package installs Python bindings when `+python` is set
Note: this does not inherit `PythonPackage`, which force an either/or
choice between the Makefile and Pip builder: it instantiates a
`PythonPipBuilder` as needed (when `+python` is set).
Paths over 260 characters in length are not handled by `shutil.rmtree`
unless they use the extended-length path syntax (using a prefix of
"\\?\").
This fixes an issue where stage cleaning fails when paths in a stage
exceed the normal 260-character limit.
This indicates that other parts of the codebase should be examined/
refactored to handle long paths.
* harfbuzz: enable freetype in MesonBuilder to facilitate depends_on("freetype")
* spack style fix
* freetype is defined as a depends_on(), so set as enabled in MesonBuilder rather than an option/flag/variant
* add back depends_on($lang) lines for new test api
* keep original order
Previously `spack buildcache push --only=package` errored in the OCI
case, but it's been requested that OCI can be used as pure storage w/o
the need for runnable container images.
This commit makes it so that
1. manifests refer only to runtime dependencies that were selected to be
pushed
2. failure to upload a blob among the selected specs does not prevent a
manifest/tag to be created for dependents: they just don't refer to
the missing blob as a layer/dependency
This fixes the following issues:
1. dependents of non-redistributable specs can now be pushed to oci
build caches without error
2. failure to upload one tarball does not cause cascading failures for
dependents whose tarballs do upload succesfully -- so it's better
best-effort behavior
3. for some people uploading with deps caused a massive amount of
fetches of their manifests (which certain registries count as a
download of an image, even though their layers are not fetched) --
being able to specify --only=package reduces the number of fetches.
Stage objects create mirrors ad-hoc from current config.
- There is no way to prevent mirrors from being used
- There is no way to restrict mirrors to source/binary, which is of
course context dependent.
- Stage is also used in build caches, where iterating over mirrors is
already implemented differently, and wouldn't work anyways cause it's
source only, and in particular it makes no sense for OCI build caches.
This commit:
1. Injects the sensible mirrors into the stage object from contexts
where it is relevant
2. Separates mirrors from cache, so that w/o mirrors download cache can
still be used
The test_foreground_background unit test has been marked
xfail for a while, meaning:
- Nobody looks at the results of the test
- It still runs every time
That test happens to hang frequently on some Apple M1 I have access to,
so here I mark it as skip.
Also went through other xfailing and skipped tests, and applied minor changes.
* Use absolute paths instead of https:// fake mirrors (this speed-up tests by avoiding requests)
* Add a fixture to gather in a single place code that is copy/pasted in a lot of tests
* General clean-up of tests and repeated code
Co-authored-by: Harmen Stoppels <me@harmenstoppels.nl>
* hypre: get rid of depreciated run_test method
* hypre: use mkdirp directly
* hypre: use install() for ij for addition of permissions fix
---------
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
* parsec: old to new test API
* parsec: restore stand-alone test subparts; preliminary test build fixes
---------
Co-authored-by: Tamara Dahlgren <dahlgren1@llnl.gov>
* n2p2: convert from old to new test API
* n2p2: Enhance stand-alone testing checks to reduce unnecessary processing
---------
Co-authored-by: Tamara Dahlgren <dahlgren1@llnl.gov>
* stand-alone test API update: self.cache_extra_test_sources(...) -> cache_extra_test_sources(self, ...)
* superlu: switch to new cache_extra_test_sources API
---------
Co-authored-by: Tamara Dahlgren <dahlgren1@llnl.gov>
* Add options for sparse checkout in GitFetcher
Newer versions of git have a beta feature called sparse checkout
that allow users to check out a portion of a large repo.
This feature will be ideal for monolithic repo projects that want to
model their infrastructure via spack. This PR implements an addition
to the GitFetcher that allows users to add a `git_sparse_paths`
attribute to package classes or versions which will then use sparse
checkout on those directories/files for the package.
* Style
* Split git clone into multiple functions
* Add sparse-checkout impl
* Internalize src clone functions
* Docs
* Adding sparse clone test
* Add test for partial clone
* [@spackbot] updating style on behalf of psakievich
* Small fixes
* Restore default branch status
* Fix attributes for package
* Update lib/spack/docs/packaging_guide.rst
Co-authored-by: Matthew Mosby <44072882+mdmosby@users.noreply.github.com>
* Extend unit test to multiple git versions
* style
---------
Co-authored-by: psakievich <psakievich@users.noreply.github.com>
Co-authored-by: Matthew Mosby <44072882+mdmosby@users.noreply.github.com>
* Feature update py-fortranformat
Add more recent versions of py-fortranformat. The currently included release (0.2.5) is from 2014. I've added the latest point release of each of the major versions from the last 4 years.
* update homepage
* magma: old to new test API
* magma: simplify stand-alone test method/part docstrings/purposes
---------
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
* initial commit to enable asan in remaining rocm packages
* remove os import
* add rocm-opencl rocm-dbgapi rocm-debug-agent
* add libclang path to LD_LIBRARY_PATH
* enable asan for rocfft
* add f-string and add +asan dependencies for hip and rocm-opencl
* add conflicts for centos7/8 and rhel 9
When sending Repo and RepoPath over to a child process,
we go through a marshaling procedure with pickle. The
default behavior for these classes is highly inefficient,
as it serializes a lot of specs that can just be
reconstructed on the other end of the pipe.
Here we write optimized procedures to __reduce__ both
classes.
* raja: new test API
* raja: tweak test method names and docstrings
* raja: restore running tests under proper directory
* raja: cleanup skiptest message and example call
* raja: Tweak expected outputs to match current
* raja: test_views -> test_stencil_offset_layout
---------
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
* mptensor: Changed skiptest, test name, and added docstring
* mptensor: make stand-alone test method name and docstring more specific
---------
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
* Add version 2.0.-2
* Newer version at the top
* [@spackbot] updating style on behalf of rahmans1
* py-htgettoken: reorder comments
* Use sha256sum instead of commit id for version 2.0-2 and above
---------
Co-authored-by: rahmans1 <rahmans1@users.noreply.github.com>
Co-authored-by: Wouter Deconinck <wdconinc@gmail.com>
Extracted from #44419
This adds / modifies some external detection tests for compilers,
to reproduce cases that are currently tested in unit tests.
The unit tests will later be removed.
Extracted from #45638
When adding the "detectable" tag to a package class that has the
"tag" attribute inherited from a base class, we need to copy it to
avoid modifying the base class.
* kickoff attempt
* resource similar to fortran
* delete unused install_component_codeplay
* Adding conflict for versions <= 2022.2.1, moving install to package.py, adding sha256 for version 2024.2.1
* [@spackbot] updating style on behalf of kaanolgu
---------
Co-authored-by: Kaan Olgu <kaan.olgu@bristol.ac.uk>
"spack buildcache push" for partially installed environments pushes all it
can by default, and only dumps errors towards the end.
If --fail-fast is provided, error out before pushing anything if any
of the packages is uninstalled
oci build caches using parallel push now use futures to ensure pushing
goes in best-effort style.
* migraphx: Old to new test API
* migraphx: tweak name and docstring to be more descriptive
---------
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
* c: new test API
* gcc: provides('c')
* c: bugfix and simplification of the new stand-alone test method
---------
Co-authored-by: Tamara Dahlgren <dahlgren1@llnl.gov>
* fortran: new test API
* fortran: add provides to gcc package
* fortran: simplify stand-alone test processing
---------
Co-authored-by: Tamara Dahlgren <dahlgren1@llnl.gov>
* hypre-cmake: old to new test API
* hypre-cmake: update Makefile to use installed files
* hypre-cmake: make stand-alone test method name more specific
---------
Co-authored-by: Tamara Dahlgren <dahlgren1@llnl.gov>
The old concretizer is still used to bootstrap clingo from source. If we switch to a DAG model
where compilers are treated as nodes, we need to either:
1. fix the old concretizer to support this (which is a lot of work and possibly research), or
2. bootstrap `clingo` without the old concretizer.
This PR takes the second approach and gets rid of the old concretizer code. To bootstrap
`clingo`, we store some concrete spec prototypes as JSON, select one according to the
coarse-grained system architecture, and tweak them according to the current host.
The old concretizer and related dead code are removed. In particular, this removes
`Spec.normalize()` and related methods, which were used in many unit-tests to set
up the test context. The tests have been updated not to use `normalize()`.
- [x] Bootstrap clingo concretization based on a JSON file
- [x] Bootstrap clingo *before* patchelf
- [x] Remove any use of the old concretizer, including:
* Remove only_clingo and only_original fixtures
* Remove _old_concretize and _new_concretize
* Remove _concretize_together_old
* Remove _concretize_together_new
* Remove any use of `SPACK_TEST_SOLVER`
* Simplify CI jobs
- [x] ensure bootstrapping `clingo` works on on Darwin and Windows
- [x] Raise an intelligible error when a compiler is missing
- [x] Ensure bootstrapping works on FreeBSD
- [x] remove normalize and related methods
Signed-off-by: Todd Gamblin <tgamblin@llnl.gov>
`setup-env.sh` is meant to be sourced, not executed directly.
By revoking execution permissions, users who accidentally execute
the script will receive an error instead of seeing no effect.
* Remove execution permission from `setup-env.sh` and friends
* Don't make output file executable in `spack commands --update-completion`
---------
Co-authored-by: Todd Gamblin <tgamblin@llnl.gov>
Signed-off-by: Todd Gamblin <tgamblin@llnl.gov>
* On Windows it is built with CMake, however CMake is built against
libuv, so libuv must depend on cmake+ownlibs to short circuit the
circular dependency
* libuv currently fetches the -dist source distribution of libuv for
certain versions because those versions contain a pre-generated
./configure script. However those distributions have all CMake
files removed, so they cannot be used to build on Windows.
Because the source distributions are different, this means the
checksums are different, and necessitates an additional version
declaration for each version we want to support with CMake.
* Update available versions
* fix style
* Reduce added versions to just a single new version as per review
* fix style
* Set dependency versions in line with pyproject and setup.py
* add new interp variant
* add wheel as required
* Add variant description
* change +interp default, actually add packaging this time
Fixes#43494
Add a set of environment variables SPACK_ALWAYS_CFLAGS (etc.) that
are always applied by the compiler wrapper.
Unlike SPACK_CFLAGS, for example, these will also be applied to
version checks (both SPACK_CFLAGS and SPACK_ALWAYS_CFLAGS will be
applied to the other invocation modes like ccld etc.).
Using this new functionality, the classic Intel and oneAPI compilers
are updated to pass compiler flags that disable warning messages
when newer versions are invoked via their older binary names
(these warnings were also generated for version checks, hence the
need for a new wrapper variable).
---------
Co-authored-by: Peter Josef Scheibel <scheibel1@llnl.gov>
* namd:add compile options for ROCm
* Combine --rocm-prefix and its value in a single opts.extend call to ensure they remain ordered correctly and improve code robustness.
* Standardize the code and add ROCm conflicts
* add single_node_gpu conflict
---------
Co-authored-by: U-PALLAS\boudaoud <boudaoud@pc44.pallas.cines.fr>
When clang is installed I get `clang: Permission denied`.
Setting CLANG to the full path of clang fixes this.
Signed-off-by: Bernhard Kaindl <bernhardkaindl7@gmail.com>
Fixes error:
```txt
3 errors found in build log:
61 ==> xmlto: Executing phase: 'build'
62 ==> [2023-10-26-09:48:35.425903] 'make' '-j16' 'V=1'
63 make all-am
64 make[1]: Entering directory '/tmp/root/spack-stage/spack-stage-xmlto-0.0.28-huuygrp4qasytrezg774yavnnaxzgp2e/spack-src'
65 /bin/sh ./ylwrap xmlif/xmlif.l .c xmlif/xmlif.c -- /bin/sh /tmp/root/spack-stage/spack-stage-xmlto-0.0.28-huuygrp4qasytrezg774yavnnaxzgp2e/spack-src/missing flex
66 /tmp/root/spack-stage/spack-stage-xmlto-0.0.28-huuygrp4qasytrezg774yavnnaxzgp2e/spack-src/missing: line 81: flex: command not found
>> 67 WARNING: 'flex' is missing on your system.
68 You should only need it if you modified a '.l' file.
69 You may want to install the Fast Lexical Analyzer package:
70 <http://flex.sourceforge.net/>
>> 71 make[1]: *** [Makefile:757: xmlif/xmlif.c] Error 127
72 make[1]: Leaving directory '/tmp/root/spack-stage/spack-stage-xmlto-0.0.28-huuygrp4qasytrezg774yavnnaxzgp2e/spack-src'
>> 73 make: *** [Makefile:584: all] Error 2
```
For example: spack install py-pyqt5 or py-pyqt6 would install pylupdate5 pyrcc5 and
pyuic5 into in python-venv's install prefix.
Fix https://github.com/spack/spack/issues/45359
* [py-configspace] fix dependency on cython
* py-cython not needed starting from 1.0.0
* added py-configspace 1.0.0 and 1.0.1
* py-configspace: fix style
* added py-configspace version 1.1.0
* added py-configspace version 1.1.1
* py-configspace: two more versions and new maintainer
* py-configspace: fixed typo
* py-configspace: added version 1.1.4
* Allow spec queries by `namespace`
Spack specs have "namespaces" that indicate what package repository they come from, but
there has not been a way to use the spec syntax to match one.
You can say things like this:
```console
spack find builtin.zlib
spack find myrepo.zlib
```
But, because namespaces are written as a dot-separated prefix on the name, you can't say
"find me all specs in namespace myrepo". The syntax doesn't allow it.
This PR allows you to specify anonymous specs with namespaces on the CLI. Specifically
you can do queries like this:
```console
spack find namespace=builtin
spack find namespace=myrepo
```
You can use this anywhere else you use spec syntax, e.g. in a config file to separate
installations based on what repo they came from:
```yaml
spack:
config:
install_tree:
root: $spack/opt/spack
projections:
namespace=myrepo: "myrepo_special_path/{name}-{hash}"
namespace=builtin: "builtin/{name}-{hash}"
```
This PR adds a special `namespace_if_anonymous` attribute to specs, which returns the
`namespace` if the spec has no name, otherwise it returns `None`. This allows us to
print the namespace for anonymous specs but to continue hiding it for most views, as
we've done so far.
This is implemented as a special case, but it's one that already exists, along with
`platform`, `os`, `target`, etc. This also reserves existing special case names for
variants so that users cannot define them in their package files. This change is
potentially breaking, but I do not think it will be common. There are no builtin
packages with a variant called `namespace`, and defining `os`, `target`, or `platform`
as a variant would've likely caused other problems if they were already being used.
Signed-off-by: Todd Gamblin <tgamblin@llnl.gov>
* format: allow spaces in format specifiers
Key-value pair format specifiers can now contain spaces in the key. This allows us to
add spaces to format strings that are *only* present when the attribute formatted is not
``None``. Instead of writing:
```
{arch=architecture}
```
and special casing `arch=` like a sigil in `Spec.format()`, we can now write:
```
{ arch=architecture}
```
And the space is *only* printed when `architecture` is not `None`. This allows us to
remove the special case in `Spec.format()` for `arch=`.
Previously the only `key=` prefix allowed in format specifiers was `arch=`, but this PR
removes that requirement, and the `key=` part of a key-value specifier can be any name.
It does *not* have to correspond to the formatted attribute.
- [x] modify `SPEC_FORMAT_RE` to allow arbitrary keys in key-value pairs.
- [x] remove special case for `arch=` from `Spec.format()`.
- [x] modify format strings using `{arch=architecture}` to use `{ arch=architecture}`
- [x] add more tests for formatting
This PR saves other more complex attributes like compiler flags and their spacing for later.
Signed-off-by: Todd Gamblin <tgamblin@llnl.gov>
VC toolset versions 144 and 143 are both associated with the platform
toolset 143; this deviates from prior version choices made by the
MSVC devs; add a special case to report platform toolset version
as 143 when VC toolset version is >= 143 (this will need revisiting
for later releases).
The setSet tool (removed in version 10) has an optional dependency on readline.
The build script will use the system readline if not provided by Spack.
* dd4hep: restrict to podio@0 to prevent failures with podio@1
* acts: restrict to podio@0 to prevent failures with podio@1
* dd4hep: close when range for podio
* acts: close when range for podio
* acts: fix when range for podio
* acts: close when range for podio
* acts,dd4hep: ensure main/master still depends on podio
* Fix +rocm variant, to ensure correct dependencies on ROCm packages
and use of AMD LLVM
* Add a +pshm variant for comm=gasnet to enable fast shared-memory
comms between co-locales
* Add logic to ensure we get the native CXI libfabric network provider
on Cray EX
* Expand dependency type for package modules to encompass runtime
dependencies
* Factor logic for setting (LD_)LIBRARY_PATH and PKG_CONFIG_PATH of
runtime dependencies
* Workaround issue #44746 that causes a transitive dependency on lua
to break SLURM
* Disable nonfunctional checkChplDoc test
* Annotate some variants as conditional, to improve spack info output
and reduce confusion
---------
Co-authored-by: Dan Bonachea <dobonachea@lbl.gov>
`apple-libuuid` includes types that aren't available in other `uuid`
providers; this cause issues in consuming packages (e.g., py-matplotlib)
that use SDKs like CarbonCore.framework when they attempt to use
`util-linux-uuid` as a `uuid` provider on Mac OS.
Tweak `util-linux-uuid` to indicate that it does not provide `uuid`
on Mac OS.
This was missed in #45394 because we don't run unit tests for package PRs, and
`test_all_virtual_packages_have_default_providers`, which would've caught it, is a unit
test, not an audit.
- [x] add a default provider for `wasi-sdk` in `etc/spack/defaults/packages.yaml` (which
we require for all virtuals)
- [x] rework `test_all_virtual_packages_have_default_providers` as an audit called
`_ensure_all_virtual_packages_have_default_providers`
Signed-off-by: Todd Gamblin <tgamblin@llnl.gov>
* pinentry: New API
* move code around
* added back version check
* Complete check_version refactor
* Honor original handling of guis (i.e., don't try if not there)
---------
Co-authored-by: Tamara Dahlgren <dahlgren1@llnl.gov>
* upgrade apptainer: security fix
apptainer 1.3.1 has a high severity security issue: CVE-2024-3727
Upgrade to 1.3.2 or preferably 1.3.3
* added comment for 1.3.1
---------
Co-authored-by: Walter de Jong <walter.dejong@surf.nl>
* intel-oneapi-compilers: update description with current compilers
* Update var/spack/repos/builtin/packages/intel-oneapi-compilers/package.py
Co-authored-by: Robert Cohn <robert.s.cohn@intel.com>
* intel-oneapi-compilers: break docstring line
---------
Co-authored-by: Robert Cohn <robert.s.cohn@intel.com>
* kokkos: new test API
* kokkos: added import llnl.util.lang as lang because earlier versions couldn't be installed without it
---------
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
* povray: new test API
* capture output and test name change
* povray: add v3.7.0.10, deprecate 3.7.0.8
---------
Co-authored-by: Tamara Dahlgren <dahlgren1@llnl.gov>
* umpire: old to new test format
* umpire: old to new test method and refactor
* indentation
* black reformat
* last minute syntax
* docstring and checks
* black format
* change test name
* method call correction
* Resolve problem with stand-alone tests (or examples) not loading library (Fixes#44960)
---------
Co-authored-by: Tamara Dahlgren <dahlgren1@llnl.gov>
* sz: new test API
* fix typo; check installed executable; conform to subpart naming convention
* skip tests early if not installed; remove unnecessary "_sz" from test part names
---------
Co-authored-by: Tamara Dahlgren <dahlgren1@llnl.gov>
Library names on Windows are not typically prefixed with lib; the default
`.libs` implementation accounts for this, but `netlib-lapack` has a
custom implementation of `.libs` that did not account for this.
The `Executable` class emits a warning when you pass quoted arguments to it:
```
> spack pkg grep '"namespace"'
==> Warning: Quotes in command arguments can confuse scripts like configure.
The following arguments may cause problems when executed:
"namespace"
Quotes aren't needed because spack doesn't use a shell. Consider removing them.
If multiple levels of quotation are required, use `ignore_quotes=True`.
```
This is to warn new package authors who aren't used to calling build commands in python.
It's not useful for `spack pkg grep`, where we really are passing args on the command
line, and if we pass a quoted string, we probably meant to.
- [x] make `ignore_quotes` an instance variable, not just an argument to ``__call__`
- [x] set `ignore_quotes` to `True` in `spack pkg grep`
Signed-off-by: Todd Gamblin <tgamblin@llnl.gov>
* package/linux-pam: dependencies
* Adding variants to linux-pam
* Updating linux-pam variants
* Fixing variants for linux-pam after testing
* clean up flag handling
* clean up terrible tabs
* cant use default_args for compiler dependencies
* Change selinux to off by default
---------
Signed-off-by: Teague Sterling <teaguesterling@gmail.com>
* Adding new versions and compilation conflict for nodejs
* Update failed version for gcc14
* Updating conflicts notes for correctness/clarity/format
* Applying spack-ized versions of fix in https://github.com/nodejs/node/issues/52223 to adddress CI failures
* Update fix-old-glibc-random-headers.patch
* Update package.py
* Update fix-old-glibc-random-headers.patch
* Update fix-old-glibc-random-headers.patch
* Adding conflict for older glibc
* Fixing patch for older systems, need to undef
* Removing overly strict conflicts
---------
Signed-off-by: Teague Sterling <teaguesterling@gmail.com>
* Several tests can be enabled on Windows with no changes to logic
(either the test logic or logic being tested)
* Test for `spack location` requires modification of the test logic,
but with a minor change can be enabled on Windows
using self.compiler.cc_pic_flag here results in these errors:
==> sqlite: Executing phase: 'install'
==> Error: AttributeError: 'AutotoolsBuilder' object has no attribute 'compiler'
change it to self.pkg.compiler.cc_pic_flag instead.
* imoroved-rdock: new test API
* Make test subpart names and or descriptions more accurate
---------
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
* e4s ci: enable some disabled specs
* comment out cp2k +cuda due to unsupported cuda_arch
* comment out dealii+cuda due to concretize error
* work through concretize errors
* e4s: comment out failing builds
* e4s stack: disabled non-building specs
* comment out failing specs
* comment out failing specs
* cleanup comments
* rust: rework external find to require both rustc and cargo
* rust: handle unable to parse version
* [@spackbot] updating style on behalf of wdconinc
* rust: not x or not y -> not (x and y)
Co-authored-by: Alec Scott <hi@alecbcs.com>
* rust: pick first rustc found
Co-authored-by: Alec Scott <hi@alecbcs.com>
* rust: list comprehensions
Co-authored-by: Alec Scott <hi@alecbcs.com>
---------
Co-authored-by: wdconinc <wdconinc@users.noreply.github.com>
Co-authored-by: Alec Scott <hi@alecbcs.com>
* libmesh: add missing v1.7.1 release
* libmesh: avoid pulling in petsc if only +mpi or +metis is given
* libmesh: add shared variant
Co-authored-by: rbberger <rbberger@users.noreply.github.com>
The "use_store" context manager is used to swap the value
of a global variable (spack.store.STORE), while keeping
another global variable consistent (spack.config.CONFIG).
When doing that it tries to evaluate the previous value
of the store, if that was not done already. This is wrong,
since the configuration might be in an "intermediate" state
that was never meant to trigger side effects.
Remove that operation, and add a unit test to
prevent regressions.
Add language dependencies `c`, `cxx`, and `fortran`.
These `depends_on` statements are auto-generated based on file extensions found
in source tarballs/zipfiles.
The `# generated` comment can be removed by package maintainers after
validating correctness.
* detray: new package
This commit adds the detray package, a detector description library for
HEP experiments that is designed to be GPU-friendly.
* Update var/spack/repos/builtin/packages/detray/package.py
Co-authored-by: Wouter Deconinck <wdconinc@gmail.com>
* Update var/spack/repos/builtin/packages/detray/package.py
Co-authored-by: Wouter Deconinck <wdconinc@gmail.com>
---------
Co-authored-by: Wouter Deconinck <wdconinc@gmail.com>
* vasp: add new version 6.4.3 and rework package
* vasp: remove redundant cuda dep
* vasp: bump fftlib variant version restriction
* vasp: honor the still existing scalapack variant
---------
Signed-off-by: Shane Nehring <snehring@iastate.edu>
Since the the MetaPathFinder now owns a lazily constructed RepoPath object, we need to deserialize environments before the package that needs to be restored. Before we were relying on globals to be inconsistent in a way that let the entire process go.
The patch which enables icx/ifx compilers is only added for `wrf@4.4:`. This PR prints a useful message at concretization time instead of failing the installation later on.
Co-authored-by: stephenmsachs <stephenmsachs@users.noreply.github.com>
* slate: changed from old to new format
* make code tighter
* replace assert method
* SkipTest plus other cleanup
---------
Co-authored-by: Tamara Dahlgren <dahlgren1@llnl.gov>
* vecmem: add infrastructure for working with SYCL
The vecmem package uses an unorthodox build system where, instead of
expecting a SYCL-capable compiler in the `CXX` environment variable, it
expects one in `SYCLCXX`. It also needs the correct SYCL flags to be
set. This commit adds a custom build environment for the vecmem package
which allows it to be built in this way. I've also added an extra CMake
flag to ensure that the build system doesn't download any unwanted
dependencies.
* Update var/spack/repos/builtin/packages/vecmem/package.py
Co-authored-by: Wouter Deconinck <wdconinc@gmail.com>
---------
Co-authored-by: Wouter Deconinck <wdconinc@gmail.com>
- Add explicit conflict on ppc64le for 12.5 and newer.
- Update/fix intel compiler conflict to reflect that intel@2021 is compatible
only since 11.4.1 and not since 11.1.1.
- Add intel compiler conflicts to reflect strict support matrix since
12.2.0.
As discussed in https://github.com/spack/spack/pull/44881#issuecomment-2218411735 a `spack install py-globus-cli` fails to concretize on an Ubuntu 22.04 under Windows WSL2 because of too strict of explicit dependencies.
Let's try to remove them here (since these are "just in case" and in all honesty should be handled by `py-globus-sdk` anyways).
* Now builds with latest fmt release (11.0.1)
* Missing array include in nem_spread
* Fix timestep conssitency check in file-per-rank case if one or more dbs have no timesteps.
If an external happens to be a provider of anything, the solver would
set its weight to 0, meaning that it is most preferred, even if
packages.yaml config disagrees.
That was done so that `spack external find mpich` would be sufficent to
pick it up as mpi provider.
That may have made sense for mpi specifically, but doesn't make sense
for other virtuals. For example `glibc` provides iconv, and is an
external by design, but it's better to use libiconv as a separate
package as a provider.
Therefore, drop this rule, and instead let users add config:
```
mpi:
require: [mpich]
```
or
```
mpi:
buildable: false
```
which is well-documented.
This change makes `spack external find --not-buildable` mark virtuals
provided by detected packages as non-buildable, so that it's sufficient
for users to let spack detect say mpich and have the concretizer pick it
up as mpi provider even when openmpi is "more preferred".
Consistently with ArmPL@24:, the include directory for acfl@24:
has changed to include. The change wants to update to this change
and distinguish the include path for releases previous to 24.04
and the future ones
* rocm-cmake: changed test format from old to new
* Rename cmake variable
* post-conflict resolution: remove remaining version check
---------
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
* Added Release 0.0.4 and 0.0.5
* Changed requirement for gotcha
use gotcha 1.0.5 for 0.0.2 and 0.0.3
* Combine gotcha 1.0.7 for master and develop
---------
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
in case of inheritance the static tags prop may be updated multiple
times, and it turns out builder classes magically inherit from
traditional package classes
While trying to build packages with the OneAPI compiler version 2024.1 I
ran into the following error, indicating that the compiler is unable to
find some necessary libraries:
```
/storage/Software/oneapi/2024.1/compiler/2024.1/bin/sycl-post-link: error
while loading shared libraries: libonnxruntime.1.12.22.721.so: cannot open
shared object file: No such file or directory
icpx: error: unable to execute command: No such file or directory
icpx: error: sycl-post-link command failed due to signal (use -v to see
invocation)
```
Indeed, `libonnxruntime.1.12.22.721.so` does come bundled with the
OneAPI compiler, but it is not available in the build environment by
default. In this commit, I update the custom environment created by
OneAPI to include the `lib/` directory in which these libraries reside
in the `LD_LIBRARY_PATH` environment variable.
In my enthusiasm to add dfelibs to Spack, I didn't realise that the
unit tests of dfelibs use Boost and, as such, Boost is required as a
testing dependency.
Originally if you had `x -> y -> z`, and an env with `x` in its speclist that is concretized but not installed, then `spack find -c y` would not show anything. This was intended: `spack find` has up-until-now only ever listed out installed specs (and `-c` was for adding a preamble section about roots).
This changes `spack find` so:
* `-c` makes it search through all concretized specs in the env (in a sense it is anticipated that a concretized environment would serve as a "speculative" DB and users may want to query it like they query the DB outside of envs)
* Adds a `-i/--install-status` option, equivalent to `-I` from `spack spec`
* Shows install status for either `-c` or `-i`
* As a side effect to prior point, `spack find -i` can now distinguish different installation states (upstream/external)
Examples:
```
$ spack find -r
==> In environment findtest
==> 1 root specs
- raja
==> 6 installed packages (not shown)
==> 12 concretized packages to be installed (not shown)
```
```
$ spack find
==> In environment findtest
==> 1 root specs
- raja
-- darwin-ventura-m1 / apple-clang@14.0.3 -----------------------
berkeley-db@18.1.40 bzip2@1.0.8 diffutils@3.10 gmake@4.4.1 gnuconfig@2022-09-17 libiconv@1.17
==> 6 installed packages
==> 12 concretized packages to be installed (show with `spack find -c`)
```
```
$ spack find -c
==> In environment findtest
==> 1 root specs
- raja
-- darwin-ventura-m1 / apple-clang@14.0.3 -----------------------
[+] berkeley-db@18.1.40 [+] bzip2@1.0.8 - cmake@3.29.4 [+] diffutils@3.10 [+] gmake@4.4.1 [+] libiconv@1.17 - nghttp2@1.62.0 - pkgconf@2.2.0 - readline@8.2
- blt@0.6.2 - camp@2024.02.1 - curl@8.7.1 - gdbm@1.23 [+] gnuconfig@2022-09-17 - ncurses@6.5 - perl@5.38.2 - raja@2024.02.2 - zlib-ng@2.1.6
==> 6 installed packages
==> 12 concretized packages to be installed
```
$ spack -E find
...
==> 82 installed packages
```
* Add py-datasets version 2.20.0
* Add dependency requirements for version 2.20 + refactor
* Add missing tqdm and requests versions and to install latest py-datasets
* Add missing python requirements for 2.8.0 and 2.20.0
Fix a bug where Spec.tree with cover=nodes reduces deptypes from all
in-edges, including from nodes not reachable from the root, which almost
always happens for concrete specs
`Spec.__getitem__` queries dependent edges, which almost always point to
nodes outside the sub-dag considered. It should only ever look at edges
being traversed.
When using a newer Clang for Kokkos than supported by a given CUDA version, the
CUDA compiler detection in Legion's CMake still needs to be passed
CMAKE_CUDA_FLAGS to pass the compiler check.
This modifies heuristic to decay to clingo default
over time. The hope is that this helps with specs
that have an optimal solution with a high penalty.
Let target and compiler heuristic decay too, do not
guess compiler
* dfelibs: new package
This commits adds the `dfelibs` package, which is an Acts project fork
of dfelibs.
* dfelibs: docstring typo
---------
Co-authored-by: Wouter Deconinck <wdconinc@gmail.com>
Add MatrixSwitch package
Add libOMM package
Use libOMM as external in ELSI
Add include paths for all libraries
Fortran modules need one directory up (can't use libs.directories since they are just the include/ directories)
This addresses a few issues in the kentutils package:
- Issue #44372
- Cleaning up formattting and styles
- Removing old versions that are not avaialble anymore
- Removing newer versions that are also not available anymore
- The installer does not install the static libs
that are expected by packages that depend on kentutils
- There are conflicts and less-than-desirable dependencies
that can be addressed via variants
Signed-off-by: Teague Sterling <teaguesterling@gmail.com>
* Bumping up to ROCm 6.1.2
* Bump up rocmlir & amdsmi to 6.1.2
* Removing llvm dependency from amdsmi
* Removed redundant for loops and brought rocm-cmake in for loop
* Removing version check of deprecated versions
This adds spack.util.spack_yaml.anchorify, which takes a non-cyclic
dict/list structure, and replaces identical values with (back)
references to the first instance, so that yaml serialization will use
anchors.
`repr` is used to identify sub-dags, which in principle is quadratic
complexity in depth of the graph, but in practice the depth is O(1) so
this should not matter.
Then this is used in CI to reduce the size of generated YAML files to
30% of their original size.
* lammps: add new versions
* lammps: add directories for plugins
* lammps-example-plugin: new package
Example illustrating how to install a LAMMPS plugin, based on the
example part of the LAMMPS distribution.
If netlib-lapack is built with ~external-blas, it internally links
liblapack.so with libblas.so, meaning that whenever netlib-lapack is
used as a lapack provider, the package must also be a blas provider.
Conversely using netli-lapack as a blas provider does not imply that it
also must provide lapack, but nothing is lost disallowing that...
In practice people don't care about having their build dependencies reinstalled with say cflags=-O3 if that is what is set at the input spec, so restrict propagation to link/run deps only.
Also simplify the encoding in asp.
* Changed test method from old method to new method
* Corrected test name and added docstring
* Split test method into stand alone-tests
* Added SkipTest
* code refactor
* removed repeated code
* Remove exe from test part purpose
---------
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
* Improve proj version selection to avoid too new of a proj with older api usage in vtk9
* Proj constraint range around 8.2.1
---------
Co-authored-by: John Parent <john.parent@kitware.com>
Fix the following on Windows:
* `spack load --list` (this printed 0 packages even if packages were
loaded)
* `spack unload <package>` (this said that the package is not loaded
even if it was)
Update unit tests for `spack load` to also run on Windows (specifically
for ".bat"). This involved refactoring a few tests to parameterize
based on whether the unit tests are being run on a Windows system
(and to account for batch syntax).
* Adding additional versions to plink2 and switching to tarballs to allow for better version detection in the future
---------
Signed-off-by: Teague Sterling <teaguesterling@gmail.com>
The pcluster pipeline runs spack external find and autodetects the most ancient of zlib versions on the system: 1.2.7, release date May 3, 2012.
Turns out some packages require parts of the zlib api added within the last decade.
* update e4s stacks
* adios2 +rocm: disable kokkos due to spack issue #44832
* comment out mgard+cuda due to spack issue #44833
* comment out cabana, legion, arborx due to kokkos spack issue #44832
* comment out slepc, petsc due to petsc spack issue #44600
* comment out adios2+rocm due to kokkos rocm spack issue #44832
* comment out kokkos due to spack issue #44832
When we changed how to deal with errors in November,
we didn't realize that for an unconstrained choice
rule it is more important in the heuristic to guess
what is NOT in the answer set, since it will be the
majority of options.
Previously this was following automatically from what
was in the answer set, via `1 { ... } 1` cardinality
constraints.
Here we improve the heuristic and the solve time for specs.
* Patched CMakeLists.txt to find drm include at libdrm - archlinux
* Restricted usage patch to versions 34 onwards
* Update var/spack/repos/builtin/packages/rdma-core/libdrm.patch
---------
Co-authored-by: Mark Abraham <Mark.J.Abraham@gmail.com>
* Spglib: add version 2.4.0
* DLA-Future: fix +test option
* elsi
* elsi improvements
* [@spackbot] updating style on behalf of RMeli
* remove test variants
* fix ntpoly and and use externals as default
---------
Co-authored-by: RMeli <RMeli@users.noreply.github.com>
* py-multiqc: updating to @1.21, adding new dependency py-pyyaml-env
* Correcting dependencies
* Drop matplotlib depends_on() for versions of multiqc not included in package.py
---------
Co-authored-by: LMS Bioinformatics <bioinformatics@lms.mrc.ac.uk>
* Allow zlib to find external installations.
* Apply suggestions from code review
* Fixed the determine_version function to loop over all of the potential
libraries that could be installed by zlib.
---------
Co-authored-by: John W. Parent <45471568+johnwparent@users.noreply.github.com>
* Update hohqmesh and feq-parse versions
Update feq-parse homepage to new documentation page
Update feq-parse license to be consistent with 2.2.2 release
---------
Co-authored-by: fluidnumerics-joe <fluidnumerics-joe@users.noreply.github.com>
This commit adds new versions of actsvg. I have also taken the liberty
of adding myself a maintainer as I work actively on the ACTS project and
its dependencies, and would like to start keeping the Spack specs more
up to date.
* e4s external rocm ci: bump rocm stack to v6.1.1
* comment out exago+rocm due to issue with raja@0.14.0 see spack issue #44593
* comment out adios2+rocm due to spack issue #44594
* comment out petsc+rocm due to spack issue #44600
* comment out sundials+rocm due to spack issue #44601
* comment out slepc+rocm due to petsc spack issue #44600
* comment out tau+rocm due to spack issue #44659
* comment out ecp-data-vis-sdk due to spack issue #44745
* packages: register rocm-core as external
* re-enable tau due to issue #44659 having been resolved
* use latest ci image: ecpe4s/ubuntu22.04-runner-amd64-gcc-11.4-rocm6.1.1:2024.06.17
* comment out paraview due to spack issue #44745
* comment out ecp-data-vis-sdk +vtkm due to issue https://gitlab.spack.io/spack/spack/-/jobs/11632511
* Update for 2.0.1
* cloudpickle dependency is only 'run'
* Follow new formatting guidelines
* black wants trailing commas
* Simplified version ranges, as recommended by @tldahlgren
* vtk-m: Changed test method names and skipping non-applicable tests from old to new approach
-----
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
* add cray detection taken from upcxx
* add CUDA/ROCm support
* add numerous pass-through options to Chapel build,
like gpu_mem_strategy, comm_substrate, etc.; all variants are
translated to analogous CHPL_* environment variables. As a side
effect, this defines a number of environment variables that are
not actually used by Chapel.
* Define LD_LIBRARY_PATH, LIBRARY_PATH, and PKG_CONFIG_PATH to
help programs built with Chapel properly locate needed runtime
dependencies
---------
Co-authored-by: bonachea <dobonachea@lbl.gov>
* Projsync needs curl
This fixes a proj compilation error from paraview
* tiff does not set TIFF_INCLUDE_DIR tested by proj
* TIFF patch exists for proj 9.2
* Add comments with location of proj patch
* Use TIFF patches for different cmake versions
* Use modules starting cmake 3.28 and variables before that
* Fix black style
* Simpler patches, add newer proj
* Remove duplicated flag
* Deprecate PROJ 4.8 and older
* Remove PRIVATE
* Deprecate PROJ 7.0.0
---------
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Not sure why I had this here, as `/bin/sh` will find the first spack in `PATH` just like
`env`.
- [x] remove `/usr/bin/env` and avoid an extra process launch.
Signed-off-by: Todd Gamblin <tgamblin@llnl.gov>
* omega-h: reformatted from old test method to new test method
* omega-h: added proper output checking
--------
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
The ``+cluster` variant requires there be an MPI family known in the
spec. When using externals it is easy to miss-configure this requirement
leading to a runtime exception which is not desirable. This converts the
exception to a package rule.
* xorg libs: new versions
* xorg pkgs: update homepage from cgit to gitlab
* xorgs pkgs: fix homepage since, yeah, I did edit those 122 files by hand...
* libxmu: don't need the .0 patch version here
---------
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
* Fixed some issues with installation breaking due to mysql_client
* Remove debugging details
* Adding client_only to deps
* Adding client_only to variant and deps
* Undoingw client_only to variant and deps
* py-pyopengl: new simple package
* py-pyopengl: Fix typo in comment
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* py-pyopengl: add variants and dependencies
* py-pyopengl: build from source and improve variants
* py-pyopengl: use corrected freeglut libs
* py-pyopengl: update copyright
* py-pyopengl: remove duplicate conflict clause
* py-pyopengl: change dependency to link
---------
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Core change: logic for extracting RPATHs from modules may return
`None`: filter this out of the set of RPATHs that is auto-generated
* Core change: `CachedCMakePackage` no longer adds ldflags to
`CMAKE_STATIC_LINKER_FLAGS`: generally these flags are not appropriate
for static linking (e.g. invocation of `ar`)
* [mfem] Add version 4.7
* [mfem] Add variant for precision (single/double). Enforce consistency
for precision amongst mfem and hypre/petsc/mumps dependencies
* [mfem] Add cxxstd (and related constraints preventing use of
old cxxstd values for newer versions of some dependencies)
* [hypre] In line with prior point, added support for specifying
precision
* [petsc] Add config option to avoid error when building against
`superlu-dist+rocm`
* [hiop] add proper `raja`/`umpire`/`camp` version constraints for
`hiop` versions 0.3.99-0.4.x; require `+raja` for `+rocm`, and
add dependency on `hiprand` for `+rocm`
* [butterflypack, mfem, strumpack, suite-sparse] Require
`CRAYLIBS_{target-family}` env var to be defined
* [suite-sparse] versions `@7.4:` changed install location of headers:
add symlink from old location to new location
* [zlib-ng] Fix error where shared libs were not successfully built for
`%cce@17` (the build did not fail, but the finished `zlib-ng%cce@17`
install did not have shared libs)
* suite-sparse library path can be lib or lib64
* fixing style check error
* Adding the missing import os
* Style check error fix
* Updating patch for 6.1.0 with correct lib path
* Preserve higher weight for CLI git ref versions
Currently the concretizer fails if you reuse a git ref version
that has already been installed but modify the spec at all.
See #38484 for futher diagnosis
The issue here is that since there is no established provenance for
these versions the highest weight they are currently assigned is
that of prior install. Re-use checks then fail because the weight of
the version is identical to the solver.
Ironically, these versions are given the highest weights possible when
specified on the CLI for the first time. They should only appear in a
DAG if they are an exact match or if the user specifies them at the CLI.
Therefore it makes sense to preserve their higher ordering.
Getting this right is critical to moving all branch based versions to a pinned
git-ref in the future.
* [@spackbot] updating style on behalf of psakievich
* Update lib/spack/spack/solver/asp.py
Co-authored-by: Greg Becker <becker33@llnl.gov>
* Add provenance specific to git ref installs
* Sensitvity to name that I could not track down
* Add regression test
* Adjust test
* Add prefer standard unit-test
* Style
* Add required mock
* Format and mark
* Make unit-test case reproduce CLI investigation
* Remove unnecessary mock package
* [@spackbot] updating style on behalf of psakievich
* Use already developed fixture
* Add zlib-ng to mocks again
* Remove accidental adds
* Remove maintainer
* [@spackbot] updating style on behalf of psakievich
* Rename test file
* [@spackbot] updating style on behalf of psakievich
* Remove unused imports
* Update tests
* [@spackbot] updating style on behalf of psakievich
* Style
* Update lib/spack/spack/test/concretize.py
Co-authored-by: Greg Becker <becker33@llnl.gov>
* Update solver rule
* Duplicate installed rules for installed_git_version
* Revert "Duplicate installed rules for installed_git_version"
This reverts commit 17223fc8d1.
---------
Co-authored-by: psakievich <psakievich@users.noreply.github.com>
Co-authored-by: Greg Becker <becker33@llnl.gov>
* libdistributed: renamed test to check_test
* libpressio-rmetric: renamed test method
* libpressio-tools: renamed test method
* Renamed build-time test methods for: libpressio-opt, libpressio-tthresh, opened
---------
Co-authored-by: Jackson Peter Lawrence <lawrence31@borax5.llnl.gov>
* Provide instructions for building a developmental version of lcov.
* style fix
* style fix
* Promote single version git URL to the package level.
* Formatting fix.
* verilator: Some environment varibles are no longer required
* Revert depends_on for flex back to the deafult case
* Use decorator, when, for setup_run_environment insdtead of if inside function
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
