Newer versions of the CrayPE for EX systems have standalone compiler executables for CCE and compiler wrappers for Cray MPICH. With those, we can treat the cray systems as part of the linux platform rather than having a separate cray platform.
This PR:
- [x] Changes cray platform detection to ignore EX systems with Craype version 21.10 or later
- [x] Changes the cce compiler to be detectable via paths
- [x] Changes the spack compiler wrapper to understand the executable names for the standalone cce compiler (`craycc`, `crayCC`, `crayftn`).
For some instances of externally-provided Python (e.g. Homebrew),
the LDLIBRARY/LIBRARY config variables don't actually refer to
libraries and should therefore be excluded from ".libs".
Only enable the hdf5-vfd-gds package if it can compile.
- hdf5-vfd-gds needs cuda@11.7.1+ to be able to `find_library` for cuFile.
- Only enable hdf5-vfd-gds in the sdk if cuda@11.7.1+ is available.
If an earlier version of cuda is being used, do not depend on the
hdf5-vfd-gds package at all.
* take two
* Add missing import statement
* Group dependencies together
* Extract libtiff arguments
* Extract libpng arguments
* Push preamble variable into png_args and tiff_args
* Extract setting args associated with the screenshot variant
* Inlined a few variables
* Modify only build targets and install targets
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
Whenever the rpath string actually _grows_, it falls back to patchelf,
when it stays the same length or gets shorter, we update it in-place,
padded with null bytes.
This PR only deals with absolute -> absolute rpath replacement. We don't
use `_build_tarball(relative=True)` in our CI. If `relative` then it falls
back to the old replacement code.
With this PR, relocation time goes down significantly, likely because patchelf
does some odd things with mmap, causing lots of overhead. Example:
- `binutils`: 700MB installed, goes from `1.91s` to `0.57s`, or `3.4x` faster.
Relocation time: 27% -> 10% of total install time
- `llvm`: 6.8GB installed, goes from `28.56s` to `5.38`, or `5.3x` faster.
Relocation time: 44% -> 13% of total install time
The bottleneck is now decompression.
Note: I'm somewhat confused about the "relative rpath" code paths. Right
now this PR only deals with absolute -> absolute replacement. As far as
I understand, if you embrace relative rpaths when uploading to the
buildcache, the whole point is you _don't_ want to patch rpaths on
install? So it seems fine to not expand `$ORIGIN` again imho.
When a package asks for non-parallel make, we need to force `make -j1` because just doing `make` will run in parallel under jobserver (e.g. `spack env depfile`).
We now always add `-j1` when asked for a non-parallel execution (even if there is no jobserver).
And each `MakeExecutable` can now ask for jobserver support or not. For example: the default `ninja` does not support jobserver so spack applies the default `-j`, but `ninja@kitware` or `ninja-fortran` does, so spack doesn't add `-j`.
Tips: you can run `SPACK_INSTALL_FLAGS=-j1 make -f spack-env-depfile.make -j8` to avoid massive job-spawning because of build tools that don't support jobserver (ninja).
* testing ssh key
* test
* LR : Creating the packge to install the gegelati app
* LR : Gegelati, a TPG C++ library added and fully tested
* LR : adjusting for fork
* LR: taking out the boilerplates
* LR: taking out the rest
We try to avoid non-default variant values in the concretizer, but this doesn't make
sense for variants forced to take some non-default value by variant propagation.
Counting this as a penalty effectively biases the concretizer for small specs dependency
graphs -- something we try very hard to avoid elsewhere because it can lead to very
strange decisions.
Example: with the penalty, `spack spec hdf5` will choose the default `openmpi` as its
`mpi` provider, but `spack spec hdf5 ~~shared` will choose `mpich` because it has to set
fewer non-default variant values because `mpich`'s DAG is smaller. That's not a good
reason to prefer a non-default virtual provider.
To fix this, if the user explicitly requests a non-default value to be propagated, there
shouldn't be a penalty. Variant values set on the CLI already don't count as default; we
just need to extend that to propagated values.
Adds another post install hook that loops over the install prefix, looking for shared libraries type of ELF files, and sets the soname to their own absolute paths.
The idea being, whenever somebody links against those libraries, the linker copies the soname (which is the absolute path to the library) as a "needed" library, so that at runtime the dynamic loader realizes the needed library is a path which should be loaded directly without searching.
As a result:
1. rpaths are not used for the fixed/static list of needed libraries in the dynamic section (only for _actually_ dynamically loaded libraries through `dlopen`), which largely solves the issue that Spack's rpaths are a heuristic (`<prefix>/lib` and `<prefix>/lib64` might not be where libraries really are...)
2. improved startup times (no library search required)
Untouched spec pruning was added to reduce the number of specs
developers see getting rebuilt in their PR pipelines that they
don't understand. Because the state of the develop mirror lags
quite far behind the tip of the develop branch, PRs often find
they need to rebuild things untouched by their PR.
Untouched spec pruning was previously implemented by finding all
specs in the environment with names of packages touched by the PR,
traversing in both directions the DAGS of those specs, and adding
all dependencies as well as dependents to a list of concrete specs
that should not be considered for pruning.
We found that this heuristic results in too many pruned specs, and
that dependents of touched specs must have all their dependencies
added to the list of specs that should not be considered for pruning.
* SEACAS: Update package.py to handle new SEACAS project name
The base project name for the SEACAS project has changed from
"SEACASProj" to "SEACAS" as of @2022-10-14, so the package
needed to be updated to use the new project name when needed.
The refactor also changes several:
"-DSome_CMAKE_Option:BOOL=ON"
to
define("Some_CMAKE_Option", True)
* SEACAS: Additional refactorings
* Replaced all cmake "-Dsomething=other" lines with either `define`
or `define_from_variant` functions.
Consolidated the application (fortran, legacy, all) enabling lines
into loops over the code names. Easier to see categorization of
applications and also to add/move/remove an application
Reordered some lines; general cleanup and restructuring.
* Address flake8 issues
* Remove trailing whitespace
* Reformat using black
* add new package: py-pylatex
* fix bugs
* add extras indicated in setup.py
* Update var/spack/repos/builtin/packages/py-pylatex/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-pylatex/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* improvements
* remove git merge related lines
* tidy
* Update var/spack/repos/builtin/packages/py-pylatex/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* remove variant
* [@spackbot] updating style on behalf of Sinan81
Co-authored-by: sbulut <sbulut@3vgeomatics.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Sinan81 <Sinan81@users.noreply.github.com>
This issue was introduced in #29761:
```
==> Installing ncurses-6.3-22hz6q6cvo3ep2uhrs3erpp2kogxncbn
==> No binary for ncurses-6.3-22hz6q6cvo3ep2uhrs3erpp2kogxncbn found: installing from source
==> Using cached archive: /spack/var/spack/cache/_source-cache/archive/97/97fc51ac2b085d4cde31ef4d2c3122c21abc217e9090a43a30fc5ec21684e059.tar.gz
==> No patches needed for ncurses
==> ncurses: Executing phase: 'autoreconf'
==> ncurses: Executing phase: 'configure'
==> ncurses: Executing phase: 'build'
==> ncurses: Executing phase: 'install'
==> Error: AttributeError: 'str' object has no attribute 'propagate'
The 'ncurses' package cannot find an attribute while trying to build from sources. This might be due to a change in Spack's package format to support multiple build-systems for a single package. You can fix this by updating the build recipe, and you can also report the issue as a bug. More information at https://spack.readthedocs.io/en/latest/packaging_guide.html#installation-procedure
/spack/lib/spack/spack/build_environment.py:1075, in _setup_pkg_and_run:
1072 tb_string = traceback.format_exc()
1073
1074 # build up some context from the offending package so we can
>> 1075 # show that, too.
1076 package_context = get_package_context(tb)
1077
1078 logfile = None
```
It turns out this was caused by a bug that had been around much longer, in which the flags were passed by reference to the flag_handler, and the flag_handler was modifying the spec object, not just the flags given to the build system. The scope of this bug was limited by the forking model in Spack, which is how it went under the radar for so long.
PR includes regression test.
* remove deptype_query remnants
* deptypes -> deptype
These arguments haven't existed since 2017, but `traverse` now fails on unknown **kwargs, so they have finally popped up.
The base project name for the SEACAS project has changed from
"SEACASProj" to "SEACAS" as of @2022-10-14, so the package
needed to be updated to use the new project name when needed.
The refactor also changes several:
"-DSome_CMAKE_Option:BOOL=ON"
to
define("Some_CMAKE_Option", True)
This updates the propagation logic used in `concretize.lp` to avoid rules with `path()`
in the body and instead base propagation around `depends_on()`.
Currently, compiler flags and variants are inconsistent: compiler flags set for a
package are inherited by its dependencies, while variants are not. We should have these
be consistent by allowing for inheritance to be enabled or disabled for both variants
and compiler flags.
- [x] Make new (spec language) operators
- [x] Apply operators to variants and compiler flags
- [x] Conflicts currently result in an unsatisfiable spec
(i.e., you can't propagate two conflicting values)
What I propose is using two of the currently used sigils to symbolized that the variant
or compiler flag will be inherited:
Example syntax:
- `package ++variant`
enabled variant that will be propagated to dependencies
- `package +variant`
enabled variant that will NOT be propagated to dependencies
- `package ~~variant`
disabled variant that will be propagated to dependencies
- `package ~variant`
disabled variant that will NOT be propagated to dependencies
- `package cflags==True`
`cflags` will be propagated to dependencies
- `package cflags=True`
`cflags` will NOT be propagated to dependencies
Syntax for string-valued variants is similar to compiler flags.
Fixes an issue on the RHEL8 UBI container where this test would fail because `gr_mem`
was empty for every entry in the `grp` DB.
You have to check *both* the `pwd` database (which has primary groups) and `grp` (which
has other gorups) to do this correctly.
- [x] update `llnl.util.filesystem.group_ids()` to do this
- [x] use it in the `sbang` test
This PR introduces breadth-first traversal, and moves depth-first traversal
logic out of Spec's member functions, into `traverse.py`.
It introduces a high-level API with three main methods:
```python
spack.traverse.traverse_edges(specs, kwargs...)
spack.traverse.traverse_nodes(specs, kwags...)
spack.traverse.traverse_tree(specs, kwargs...)
```
with the usual `root`, `order`, `cover`, `direction`, `deptype`, `depth`, `key`,
`visited` kwargs for the first two.
What's new is that `order="breadth"` is added for breadth-first traversal.
The lower level API is not exported, but is certainly useful for advanced use
cases. The lower level API includes visitor classes for direction reversal and
edge pruning, which can be used to create more advanced traversal methods,
especially useful when the `deptype` is not constant but depends on the node
or depth.
---
There's a couple nice use-cases for breadth-first traversal:
- Sometimes roots have to be handled differently (e.g. follow build edges of
roots but not of deps). BFS ensures that root nodes are always discovered at
depth 0, instead of at any depth > 1 as a dep of another root.
- When printing a tree, it would be nice to reduce indent levels so it fits in the
terminal, and ensure that e.g. `zlib` is not printed at indent level 10 as a
dependency of a build dep of a build dep -- rather if it's a direct dep of my
package, I wanna see it at depth 1. This basically requires one breadth-first
traversal to construct a tree, which can then be printed with depth-first traversal.
- In environments in general, it's sometimes inconvenient to have a double
loop: first over the roots then over each root's deps, and maintain your own
`visited` set outside. With BFS, you can simply init the queue with the
environment root specs and it Just Works. [Example here](3ec7304699/lib/spack/spack/environment/environment.py (L1815-L1816))
Currently, many tests hardcode to older versions of gcc for comparisons of
concretization among compiler versions. Those versions are too old to concretize for
`aarch64`-family targets, which leads to failing tests on `aarch64`.
This PR fixes those tests by updating the compiler versions used for testing.
Currently, many tests hardcode the expected architecture result in concretization to the
`x86_64` family of architectures.
This PR generalizes the tests that can be generalized, to cover multiple architecture
families. For those that test specific relationships among `x86_64`-family targets, it
ensures that concretization uses the `x86_64`-family targets in those cases.
Currently, many tests rely on the fact that `AutotoolsPackage` imposes no dependencies
on the inheriting package. That is not true on `aarch64`-family architectures.
This PR ensures that the fact `AutotoolsPackage` on `aarch64` pulls in a dependency on
`gnuconfig` is ignored when testing for the appropriate relationships among dependencies
Additionally, 5 tests currently prompt the user for input when `gpg` is available in the
user's path. This PR fixes that issue. And 7 tests fail currently when the user has a
yubikey available. This PR fixes the incorrect gpg argument causing those issues.
The `spack info <package>` command does not show the `Virtual Packages:` output unless the `--virtuals` command option is passed. Before this changes, the information that the command is supposed to be illustrating is not shown in the example and is confusing.
* julia: don't look for the openlibm libraries when unneeded
Cause spack to *not* check for the existence of the openlibm libraries (by adding it to the pkgs list) when ~openlibm is specified.
* [@spackbot] updating style on behalf of downloadico
Co-authored-by: downloadico <downloadico@users.noreply.github.com>
- the updated OpenFOAM wmake rules now allow multiple locations for
compiler flags:
* wmake/General/common/c++Opt [central]
* wmake/linux64Gcc/c++Opt [traditional]
- match both '=' and ':=' make rule lines
Co-authored-by: Mark Olesen <Mark.Olesen@esi-group.com>
Changes to improve locating shared libraries on Windows, which in
turn enables the use of Clingo. This PR attempts to establish a
proper distinction between linking on Windows vs. Linux/Mac: on
Windows, linking is always done with .lib files (never .dll files).
This somewhat complicates the model since the Spec.lib method could
return libraries that were used for both linking and loading, but
since these are not always the same on Windows, it was decided to
treat Spec.libs as being for link-time libraries. Additional functions
are added to help dependents locate run-time libraries.
* Clingo is now the default concretizer on Windows
* Clingo is now the concretizer used for unit tests on Windows
* Fix a permissions issue that can occur while moving Git files during
fetching/staging
* Packages can now implement "win_add_library_dependent" to register
files/directories that include libraries that would need to link
to dependency dlls
* Packages can now implement "win_add_rpath" to register the locations
of dlls that dependents would want to load
* "Spec.libs" on Windows is updated to return link-time libraries
(i.e. .lib files, rather than .dll files)
* PackageBase.rpath on Windows is now updated to return the most-likely
locations where .dlls will be found (which is generally in the bin/
directory)
* Nalu-Wind: Allow for standard versions of trilinos
This will allow us to utilize custom numeric versions for trilinos in `spack-manager` while we continue to develop `nalu-wind`.
Pinging @eugeneswalker @jrood-nrel @tasmith4
* Update var/spack/repos/builtin/packages/nalu-wind/package.py
Currently there's a slow sequential step in binary relocation where all
strings of a binary are collected, with rpaths removed, and then
filtered for the old install root.
This is completely unnecessary, and also incorrect, since we replace
more than just the old install root in the prefix to prefix mapping. And
in fact the prefix to prefix mapping is parallel, and a single pass. So
even as an optimization, this filter makes no sense anymore.
Therefor we remove it
- single pass over the binary data matching all prefixes
- collect offsets and replacement strings
- do in-place updates with `fseek` / `fwrite`, since typically our
replacement touch O(few bytes) while the file is O(many megabytes)
- be nice: leave the file untouched if some string can't be
replaced
* Added py-medaka and dependencies
* fixed py-parasail build error
* medaka still doesn't have correct linked libdeflate
* fixed pyspoa deps
* added htslib.patch, confirmed builds and runs
* fixed style
* Update var/spack/repos/builtin/packages/py-auditwheel/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* made requested changes
* added targets for pyspoa dep
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
/home/xsdk/spack.x/lib/spack/env/oneapi/icx -DAdd_ -Dscalapack_EXPORTS -I/opt/intel/oneapi/mpi/2021.7.0/include -O3 -DNDEBUG -fPIC -MD -MT CMakeFiles/scalapack.dir/BLACS/SRC/dgamx2d_.c.o -MF CMakeFiles/scalapack.dir/BLACS/SRC/dgamx2d_.c.o.d -o CMakeFiles/scalapack.dir/BLACS/SRC/dgamx2d_.c.o -c /home/xsdk/spack.x/spack-stage/spack-stage-netlib-scalapack-2.2.0-uj3jepiowz5is4hmdmjrzjltetgdr3lx/spack-src/BLACS/SRC/dgamx2d_.c
/home/xsdk/spack.x/spack-stage/spack-stage-netlib-scalapack-2.2.0-uj3jepiowz5is4hmdmjrzjltetgdr3lx/spack-src/BLACS/SRC/igsum2d_.c:154:7: error: call to undeclared function 'BI_imvcopy'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
BI_imvcopy(Mpval(m), Mpval(n), A, tlda, bp->Buff);
^
Currently the vasp package always enables the use of shmem to reduce algorithm memory usage (see
https://www.vasp.at/wiki/index.php/Precompiler_options). This is great,but on some systems gives compile errors with the interoperability of C and Fortran. This PR makes that shmem flag optional, but retains the
existing default on behavior.
* Added support for building the DiHydrogen package and LBANN extensions
to DiHydrogen with ROCm libraries.
Fixed a bug on Cray systems where CMake didn't try hard enough to find
an MPI-compatible compiler wrapper. Make it look more.
Added support for the roctracer package when using ROCm libraries.
* Fixed how ROCm support is defined for pre-v0.3 versions.
- hdf5-vfd-gds:
- Add new version 1.0.2 compatible with hdf5@1.13.
- CMake is a build dependency.
- Set `HDF5_PLUGIN_PATH` in the runtime environment, this plugin
is loaded dynamically.
- SDK:
- The VFD GDS driver only has utility when CUDA is enabled.
- Require hdf5-vfd-gds@1.0.2+ (1.0.1 and earlier do not compile).
* Add patches for building clingo with MSVC
* Help python find clingo DLL
* If an executable is located in "C:\Program Files", Executable was
running into issues with the extra space. This quotes the exe
to ensure that it is treated as a single value.
Signed-off-by: Kiruya Momochi <65301509+KiruyaMomochi@users.noreply.github.com>
This commit extends the DSL that can be used in packages
to allow declaring that a package uses different build-systems
under different conditions.
It requires each spec to have a `build_system` single valued
variant. The variant can be used in many context to query, manipulate
or select the build system associated with a concrete spec.
The knowledge to build a package has been moved out of the
PackageBase hierarchy, into a new Builder hierarchy. Customization
of the default behavior for a given builder can be obtained by
coding a new derived builder in package.py.
The "run_after" and "run_before" decorators are now applied to
methods on the builder. They can also incorporate a "when="
argument to specify that a method is run only when certain
conditions apply.
For packages that do not define their own builder, forwarding logic
is added between the builder and package (methods not found in one
will be retrieved from the other); this PR is expected to be fully
backwards compatible with unmodified packages that use a single
build system.
* Updating package file for osu-micro-benchmarks for the 6.2 release
* updating sha hash for 6.2 tarball
Co-authored-by: natshineman <shineman.5@osu.edu>
* Add netcdf-c 4.9.0 and netcdf-fortran 4.6.0
With v4.9.0 netcdf-c introduces zstandard compression option which is added as a variant.
* Fix when= in dependency
* Turn on variant zstd by default
Co-authored-by: kgerheiser <kgerheiser@icloud.com>
* alquimia, pflotran, plasma, py-mpi4py, strumpack - add in new versions
* Fix hip CI failure
Co-authored-by: eugeneswalker <eugenesunsetwalker@gmail.com>
Instead of looping over multiple regexes and the entire text file
contents, create a giant regex with all literal prefixes and do a single
pass over files to detect prefixes. Not only is a single pass faster,
it's also likely that the regex is compiled better, given that most
prefixes share a common ... prefix.
In the dfs code, flip edges so that `parent` means `from` and
`spec` means `to` in the direction of traversal. This makes it slightly
easier to write generic/composable code. For example when using visitors
where one visitor reverses direction, and another only cares about
accepting particular edges or not depending on whether the target node
is seen before, it would be good if the second visitor didn't have to
know whether the order was changed or not.
Use the same compression level as `gzip` (6) instead of what Python uses
(9).
The LLVM tarball takes 4m instead of 12m to create, and is <1% larger.
That's not worth the wait...
* udunits: Update download URL
* udunits: Deprecate older versions
Unidata now only provides the latest version of each X.Y branch. Older 2.2 versions have been deprecated accordingly but are still available in the build cache.
Co-authored-by: RemiLacroix-IDRIS <RemiLacroix-IDRIS@users.noreply.github.com>
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
* Update wgrib2 from JCSDA/NOAA-EMC fork
* var/spack/repos/builtin/packages/wgrib2/package.py: fix typo in comment, add conflict for variants netcdf3, netcdf4
* wget hdf5/netcdf4 internal dependencies for wgrib2
* Black-format var/spack/repos/builtin/packages/wgrib2/package.py
* More format changes in var/spack/repos/builtin/packages/wgrib2/package.py
#32137 added an option to update() a BinaryCacheIndex with a
cooldown: repeated attempts within this cooldown would not
actually retry. However, the cooldown was not properly
tracked for failures (which is common when the mirror
does not store any binaries and therefore has no index.json).
This commit ensures that update(..., with_cooldown=True) will
also skip the update even if a failure has occurred within the
cooldown period.
Due to reuse concretization, we may generate DAGs with two occurrences
of the same package corresponding to distinct specs. This happens when
build dependencies are reused, since their dependencies are ignored in
concretization.
This caused a regression, for example: `spec['openssl']` would take the
'openssl' of the build dep `cmake`, instead of the direct `openssl`
dependency, simply because the edge to `cmake` was traversed first and
we do depth first traversal.
One solution that was discussed is to limit `spec[name]` to just direct
deps, or direct deps + transitive link deps, but this is too breaking.
Instead, this PR simply prioritizes transitive link and direct
build/run/test deps, and then falls back to a full DAG traversal. So,
it's just about order of iteration.
* Update py-sphinxcontrib-mermaid
* Add py-myst-parser
* Fix py-mdit-py-plugins and py-myst-parser dependencies
* Add py-exhale package
* Update var/spack/repos/builtin/packages/py-mdit-py-plugins/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-myst-parser/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-myst-parser/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-myst-parser/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update py-exhale and py-myst-parser dependencies
* Add @svenevs as py-exhale maintainer
* Update var/spack/repos/builtin/packages/py-mdit-py-plugins/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Scan the text files for relocatable prefixes *before* creating a tarball,
to reduce the amount of work to be done during install from binary
cache.
Co-authored-by: Harmen Stoppels <harmenstoppels@gmail.com>
* py-drep: new package
* fixed file extension
* added darwin conflict
* py-checkm-genome and py-pysam: bumped version and updated deps (#10)
added checkm and pysam deps
* added dep documentation and fixed style
* changed checkm and pysam back to dev version for upstreaming
* added url and perl run dep
* fixed style
Instead of showing
```
==> Error: Timed out waiting for a write lock.
```
show
```
==> Error: Timed out waiting for a write lock after 1.200ms and 4 attempts on file: /some/file
```
s.t. we actually get to see where acquiring a lock failed even when not
running in debug mode.
And use pretty time units everywhere, so we don't get 1.45e-9 seconds
but 1.450ns etc.
* backtraces without --debug
Currently `--debug` is too verbose and not-`--debug` gives to little
context about where exceptions are coming from.
So, instead, it'd be nice to have `spack --backtrace` and
`SPACK_BACKTRACE=1` as methods to get something inbetween: no verbose
debug messages, but always a full backtrace.
This is useful for CI, where we don't want to drown in debug messages
when installing deps, but we do want to get details where something goes
wrong if it goes wrong.
* completion
* acts: new versions
In the 20.x release line, these are the changes, https://github.com/acts-project/acts/compare/v20.0.0...v20.2.0
- `option(ACTS_SETUP_ACTSVG "Build ActSVG display plugin" OFF)` introduced in v20.1.0
- `option(ACTS_USE_SYSTEM_ACTSVG "Use the ActSVG system library" OFF)` introduced in v20.1.0
- `option(ACTS_BUILD_PLUGIN_ACTSVG "Build SVG display plugin" OFF)` introduced in v20.1.0
- `option(ACTS_USE_EXAMPLES_TBB "Use Threading Building Blocks library in examples" ON)` introduced in v20.1.0
- `option(ACTS_EXATRKX_ENABLE_ONNX "Build the Onnx backend for the exatrkx plugin" OFF)` introduced in v20.2.0
- `option(ACTS_EXATRKX_ENABLE_TORCH "Build the torchscript backend for the exatrkx plugin" ON)` introduced in v20.2.0
In the 19.x release line, these are the changes: https://github.com/acts-project/acts/compare/v19.7.0...v19.9.0
- `option(ACTS_USE_EXAMPLES_TBB "Use Threading Building Blocks library in examples" ON)` introduced in v19.8.0
The new build options have not been implemented in this commit but will be implemented next.
* acts: new variant svg
* actsvg: new package
* actsvg: style fixes
* acts: new versions 20.3.0 and 19.10.0
* astsvg: depends_on boost googletest
* actsvg: new version 0.4.26 (and style fix)
Includes fix to build issue when +examples, https://github.com/acts-project/actsvg/pull/23
* acts: new variant tbb when +examples @19.8:19 @20.1:
* acts: set ACTS_USE_EXAMPLES_TBB
* acts: no need for ACTS_SETUP_ACTSVG
* acts: move tbb variant to examples block
* acts: ACTS_USE_SYSTEM_ACTSDD4HEP removed in 20.3
* acts: use new ACTS_USE_SYSTEM_LIBS
* acts-dd4hep: new version 1.0.1, maintainer handle fixed
* acts: simplify variant tbb condition
* py-checkm-genome and py-pysam: bumped version and updated deps
* updated setuptools dep type
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
When we lose a running pod (possibly loss of spot instance) or encounter
some other infrastructure-related failure of this job, we need to retry
it. This retries the job the maximum number of times in those cases.
Currently `relocate_text` and `relocate_text_bin` are unsafe in the
sense that they run in parallel, and lead to races when modifying
different items pointing to the same inode.
This leads to the issue observed in #33453.
This PR:
1. Renames those functions to `unsafe_*` so people are aware
2. Adds logic to deal with hardlinks in current binary packages
3. Adds logic to deal with hardlinks when creating new binary tarballs,
so the install side doesn't have to de-dupe hardlinks.
4. Adds a test for 3
The assumption is that all our relocation logic preserves inodes. That
is, we should never copy a file, modify it, and then move it back. I
quickly verified, and its seems like this is true for (binary) text
relocation, as well as rpath patching in patchelf (even when the file
grows) and mach-o fixes.
* axom@0.7.0: require cmake@3.21:
* Update var/spack/repos/builtin/packages/axom/package.py
Co-authored-by: Chris White <white238@llnl.gov>
Co-authored-by: Chris White <white238@llnl.gov>
`reuse` and `when_possible` concretization broke the invariant that
`spec[pkg_name]` has unique keys. This invariant is relied on in tons of
places, such as when setting up the build environment.
When using `when_possible` concretization, one may end up with two or
more `perl`s or `python`s among the transitive deps of a spec, because
concretization does not consider build-only deps of reusable specs.
Until the code base is fixed not to rely on this broken property of
`__getitem__`, we should disable reuse in CI.
* fixed version numbers to python 2 and old biopython
* changed shortbred pacakge to pypi, removed python 2 version
* added package description
* re-added shortbred package with depreciated flag
* fixed style and removed unnecessary python dep (it can't build with python 2 anyway)
* removed whitespace and readded the python2.7.9+ dep
* fixed style
* gitlab: Do not use root_spec['pkg_name'] anymore
For a long time it was fine to index a concrete root spec with the name
of a dependency in order to access the concrete dependency spec. Since
pipelines started using `--use-buildcache dependencies:only,package:never`
though, it has exposed a scheduling issue in how pipelines are
generated. If a concrete root spec depends on two different hashes of
`openssl` for example, indexing that root with just the package name
is ambiguous, so we should no longer depend on that approach when
scheduling jobs.
* env: make sure exactly one spec in env matches hash
When installing some/all specs from a buildcache, build edges are pruned
from those specs. This can result in a much smaller effective DAG. Until
now, `spack env depfile` would always generate a full DAG.
Ths PR adds the `spack env depfile --use-buildcache` flag that was
introduced for `spack install` before. This way, not only can we drop
build edges, but also we can automatically set the right buildcache
related flags on the specific specs that are gonna get installed.
This way we get parallel installs of binary deps without redundancy,
which is useful for Gitlab CI.
When downloading from binary cache not only replace RPATHs to dependencies, but
also text references to dependencies.
Example:
`autoconf@2.69` contains a text reference to the executable of its dependency
`perl`:
```
$ grep perl-5 /shared/spack/opt/spack/linux-amzn2-x86_64_v3/gcc-7.3.1/autoconf-2.69-q3lo/bin/autoreconf
eval 'case $# in 0) exec /shared/spack/opt/spack/linux-amzn2-x86_64_v3/gcc-7.3.1/perl-5.34.1-yphg/bin/perl -S "$0";; *) exec /shared/spack/opt/spack/linux-amzn2-x86_64_v3/gcc-7.3.1/perl-5.34.1-yphg/bin/perl -S "$0" "$@";; esac'
```
These references need to be replace or any package using `autoreconf` will fail
as it cannot find the installed `perl`.
Co-authored-by: Stephen Sachs <stesachs@amazon.com>
"spack install" will not update the binary index if given a concrete
spec, which causes it to fall back to direct fetches when a simple
index update would have helped. For S3 buckets in particular, this
significantly and needlessly slows down the install process.
This commit alters the logic so that the binary index is updated
whenever a by-hash lookup fails. The lookup is attempted again with
the updated index before falling back to direct fetches. To avoid
updating too frequently (potentially once for each spec being
installed), BinaryCacheIndex.update now includes a "cooldown"
option, and when this option is enabled it will not update more
than once in a cooldown window (set in config.yaml).
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
Without this patch one hits this error trying to compiler papi with Intel OneAPI:
icx: error: Note that use of '-g' without any optimization-level option will turn off most compiler optimizations similar to use of '-O0' [-Werror,-Wdebug-disables-optimization]
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
* Fixed two bugs in the HIP package recipe. The first is that the
HIP_PATH was being set to the actual spec, and not the spec prefix.
The second bug is that HIP is expected to be in /opt/rocm-x.y.z/hip
but it's libraries can exist at both /opt/rocm-x.y.z/hip/lib and
/opt/rocm-x.y.z/lib. This means that the external detection logic may
find it in either and it turns out that some modules only expose one
of those two locations. Logic is added to ensure that the internal
HIP_PATH and associated ROCM_PATH are correctly set in both cases.
* Added support for Aluminum to use the libfabric plugin with either
RCCL or NCCL.
* Add libpressio and dependencies; some of these packages are
maintained as forks of the original repositories and in those
cases the docstring mentions this.
* Add optional dependency in adios2 on libpressio
* cub package: set CUB_DIR environment variable for dependent
installations
* Clear R_HOME/R_ENVIRON before Spack installation (avoid sources
outside of Spack from affecting the installation in Spack)
* Rename dlib to dorian3d-dlib and update dependents; add new dlib
implementation. Pending an official policy on how to handle
packages with short names, reviewer unilaterally decided that
the rename was acceptable given that the new Spack dlib package
is referenced more widely (by orders of magnitude) than the
original
Co-authored-by: Samuel Li <shaomeng@users.noreply.github.com>
* Classic Intel compilers do not support gcc-toolchain
This fix removes `--gcc-toolchain=` from the ~.fcg` files for the classic Intel
compilers. AFAIK this option is only supported for Clang based compilers.
This lead to an issue when installing cmake. Reproducer:
```
spack install cmake@3.24.2%intel@2021.7.0~doc+ncurses+ownlibs~qt
build_type=Release arch=linux-amzn2-skylake_avx512
```
Tagging maintainer @rscohn2
* Add `-gcc-name` for icc
.. and `-gxx-name` for icpc.
AFAIK this is used for modern C++ support, so we can ignore `ifort`.
Co-authored-by: Stephen Sachs <stesachs@amazon.com>
When installing an individual spec `spack --only=package --cache-only /xyz`
from a buildcache, Spack currently issues tons of warnings about
missing build deps (and their deps) in the database.
This PR disables these warnings, since it's fine to have a spec without
its build deps in the db (they are just "missing").
Currently `traverse_dependencies` fixes deptypes to traverse once and
for all in the recursion, but this is incorrect, since deptypes depend
on the node (e.g. if it's a dependency and cache-only, don't follow
build type edges, even if the parent is build from sources and needs
build deps.)
Support spackbot rebuilding all specs from source when asked (with "rebuild everything")
- Allow overriding --prune-dag cli opt with env var
- Use job variable to optionally prevent rebuild jobs early exit behavior
- ci rebuild: Use new install argument to insist deps are always installed from binary, but
package is only installed from source.
- gitlab: fix bug w/ untouched pruning
- ci rebuild: install from hash rather than json file
- When doing a "rebuild everything" pipeline, make sure that each install job only consumes
binary dependencies from the mirror being populated by the current pipeline. This avoids
using, e.g. binaries from develop, when rebuilding everything on a PR.
- When running a pipeline to rebuild everything, do not die because we generated a hash on
the broken specs list. Instead only warn in that case.
- bugfix: Replace broken no-args tty.die() with sys.exit(1)
Print a message of the form
```
Fetch mm:ss. Build: mm:ss. Total: mm:ss
```
when installing from buildcache.
Previously this only happened for source builds.
Currently "spack ci generate" chooses the first matching entry in
gitlab-ci:mappings to fill attributes for a generated build-job,
requiring that the entire configuration matrix is listed out
explicitly. This unfortunately causes significant problems in
environments with large configuration spaces, for example the
environment in #31598 (spack.yaml) supports 5 operating systems,
3 architectures and 130 packages with explicit size requirements,
resulting in 1300 lines of configuration YAML.
This patch adds a configuraiton option to the gitlab-ci schema called
"match_behavior"; when it is set to "merge", all matching entries
are applied in order to the final build-job, allowing a few entries
to cover an entire matrix of configurations.
The default for "match_behavior" is "first", which behaves as before
this commit (only the runner attributes of the first match are used).
In addition, match entries may now include a "remove-attributes"
configuration, which allows matches to remove tags that have been
aggregated by prior matches. This only makes sense to use with
"match_behavior:merge". You can combine "runner-attributes" with
"remove-attributes" to effectively override prior tags.
* petsc,py-petsc4py,slepc,py-slepc4py: add version 3.18.0
* workaround for dealii build failure [with petsc version check]
* pism: add compatibility fix to for petsc@3.18
* add in hipsolver dependency
* Add checksum for py-gitpython 3.1.27
* Update package.py
* Update var/spack/repos/builtin/packages/py-gitpython/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
When a pipeline generation job is automatically failed because it
generated jobs for specs known to be broken on develop, print better
information about the broken specs that were encountered. Include
at a minimum the hash and the url of the job whose failure caused it
to be put on the broken specs list in the first place.
* new package + deps
* Update var/spack/repos/builtin/packages/py-about-time/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-alive-progress/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* removed unnecessary python version dep
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* add new lua releases
* split install phase and move it into a build phase, remove hardcoded standard flag
* revert back to the original hardcoded std flag, guard patch against versions above 5.4
* py-pyopenssl: add version 22.1.0
* Update var/spack/repos/builtin/packages/py-pyopenssl/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Add checksum for py-regex 2022.8.17
* Update var/spack/repos/builtin/packages/py-regex/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Add checksum for py-async-lru 1.0.3
* [@spackbot] updating style on behalf of iarspider
* Update var/spack/repos/builtin/packages/py-async-lru/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update package.py
Co-authored-by: iarspider <iarspider@users.noreply.github.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* env depfile: allow deps only install
- Refactor `spack env depfile` to use a Jinja template, making it a bit
easier to follow as a human being.
- Add a layer of indirection in the generated Makefile through an
`<prefix>/.install-deps/<hash>` target, which allows one to specify
different options when installing dependencies. For example, only
verbose/debug mode on when installing some particular spec:
```
$ spack -e my_env env depfile -o Makefile --make-target-prefix example
$ make example/.install-deps/<hash> -j16
$ make example/.install/<hash> SPACK="spack -d" SPACK_INSTALL_FLAGS=--verbose -j16
```
This could be used to speed up `spack ci rebuild`:
- Parallel install of dependencies from buildcache
- Better readability of logs, e.g. reducing verbosity when installing
dependencies, and splitting logs into deps.log and current_spec.log
* Silence please!
* Add bioc attribute to r-do-db
* add version 1.38.1 to bioconductor package r-annotationforge
* add version 1.30.4 to bioconductor package r-biocparallel
* add version 2.64.1 to bioconductor package r-biostrings
* add version 4.4.4 to bioconductor package r-clusterprofiler
* add version 2.12.1 to bioconductor package r-complexheatmap
* add version 1.18.1 to bioconductor package r-delayedmatrixstats
* add version 3.22.1 to bioconductor package r-dose
* add version 3.38.4 to bioconductor package r-edger
* add version 1.16.2 to bioconductor package r-enrichplot
* add version 2.20.2 to bioconductor package r-ensembldb
* add version 1.32.4 to bioconductor package r-genomeinfodb
* add version 1.32.1 to bioconductor package r-genomicalignments
* add version 1.48.4 to bioconductor package r-genomicfeatures
* add version 1.44.1 to bioconductor package r-ggbio
* add version 3.4.4 to bioconductor package r-ggtree
* add version 1.24.2 to bioconductor package r-hdf5array
* add version 2.30.1 to bioconductor package r-iranges
* add version 1.36.3 to bioconductor package r-keggrest
* add version 3.52.4 to bioconductor package r-limma
* add version 1.8.1 to bioconductor package r-matrixgenerics
* update r-org-hs-eg-db
* add version 1.38.1 to bioconductor package r-organismdbi
* add version 1.36.1 to bioconductor package r-pathview
* add version 1.56.1 to bioconductor package r-rtracklayer
* add version 1.4.1 to bioconductor package r-scaledmatrix
* add version 1.24.1 to bioconductor package r-scran
* add version 1.6.3 to bioconductor package r-scuttle
* add version 1.18.1 to bioconductor package r-singlecellexperiment
* add version 1.20.2 to bioconductor package r-treeio
* Revert "Add bioc attribute to r-do-db"
This reverts commit 36be5c6072.
* Fix quotes on versions
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
For older versions of intel-oneapi-compilers, running the compiler in
preprocessor / compilation mode would trigger warnings that
`-Wl,-rpath,...` flags were unused.
This in turn caused certain configure scripts to fail as they did not
expect output from the compiler (it's treated as an error). Notably
cmake's bootstrap phase failed to detect c++ features of the compiler.
As a workaround, add this flag to silence the warning, since I don't
think we can scope the flags to compile+link mode.
* bump version for libvterm, required by neovim
* bump version for neovim and add related dep constraints
see release note:
d367ed9b23
in particular:
'deps: Bump required libvterm to v0.3'
https://github.com/neovim/neovim/pull/20222
* spack.compiler.Compiler: introduce prefix property
We currently don't really have something that gives the GCC install
path, which is used by many LLVM-based compilers (llvm, llvm-amdgpu,
nvhpc, ...) to fix the GCC toolchain once and for all.
This `prefix` property is dynamic in the sense that it queries the
compiler itself. This is necessary because it's not easy to deduce the
install path from the `cc` property (might be a symlink, might be a
filename like `gcc` which works by having the compiler load a module
that sets the PATH variable, might be a generic compiler wrapper based
on environment variables like on cray...).
With this property introduced, we can clean up some recipes that have
the logic repeated for GCC.
* intel-oneapi-compilers: set --gcc-sysroot to %gcc prefix
Caches used by repositories don't reference the global spack.repo.path instance
anymore, but get the repository they refer to during initialization.
Spec.virtual now use the index, and computation done to compute the index
use Repository.is_virtual_safe.
Code to construct mock packages and mock repository has been factored into
a unique MockRepositoryBuilder that is used throughout the codebase.
Add debug print for pushing and popping config scopes.
Changed spack.repo.use_repositories so that it can override or not previous repos
spack.repo.use_repositories updates spack.config.config according to the modifications done
Removed a peculiar behavior from spack.config.Configuration where push would always
bubble-up a scope named command_line if it existed
Resolves#31782
With this change, if a spec is concrete after parsing (e.g. spec.yaml
or /hash-based), then it is not disambiguated (a process which requires
(a) that the spec be installed and (b) that it be part of the
currently-active environment).
This commit allows you to:
* Diff specs from an environment regardless of whether they have
been installed (more useful for projection/matrix-based envs)
* Diff specs read from .yaml files which may or may not be entirely
different installations of Spack
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
* hpctoolkit: add version 2022.10.01
1. add version 2022.10.01
2. remove version for master branch, develop is now the main branch
3. add CPATH and LD_LIBRARY_PATH to module run environment,
this is for apps that want to use the start/stop interface
4. cleanup style in variants, depends and conflicts
5. remove all-static variant, nothing uses it
6. deprecate more old versions
* [@spackbot] updating style on behalf of mwkrentel
* Add when(+level_zero) to the gtpin variant.
* Test commit to see if this passes E4S.
* Another test commit to see if E4S succeeds.
* Add temporary hack to ignore +mpi for version 2022.10.01 and issue a
warning instead.
Co-authored-by: mwkrentel <mwkrentel@users.noreply.github.com>
* Add checksum for py-msgpack 1.0.4
* Update var/spack/repos/builtin/packages/py-msgpack/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Add checksum for py-virtualenv 20.16.4
* Add checksum for py-werkzeug 2.2.2
* Restore py-virtualenv/package.py
* Update var/spack/repos/builtin/packages/py-werkzeug/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Docs: Getting Started Dependencies
Finally document what one needs to install to use Spack on
Linux and Mac :-)
With <3 for minimal container users and my colleagues with
their fancy Macs.
* Debian Update Packages: GCC, Python
- build-essential: includes gcc, g++ (thx Cory)
- Python: add python3-venv, python3-distutils (thx Pradyun)
* Add RHEL8 Dependencies
* Add checksum for py-skl2onnx 1.12
* Update var/spack/repos/builtin/packages/py-skl2onnx/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Add checksum for py-tables 3.7.0
* Update package.py
* Update var/spack/repos/builtin/packages/py-tables/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
ROOT has a webgui which is available with the `+root7` variant. This is a fairly large part of a ROOT install (275MB out of 732MB on my system) which is not necessarily useful in all use cases (e.g. inside containers on network-restricted HPC/HTC compute nodes). This new variant adds the option to retain the ROOT7 functionality but not necessarily include the `webgui` aspects.
`__unused__` defined in `general.h` conflict with the one defined by libc headers,
so change it to `__attribute__unused__` according to s.zharkoff:
https://bugs.gentoo.org/828550#c11
cmd:
`grep -rl "__unused__" . | xargs -n1 sed -i -e 's/\b__unused__\b/__attribute__unused__/g' -e 's/(unused)/(__unused__)/g'`
Basic stack of ML packages we would like to test and generate binaries for in CI.
Spack now has a large CI framework in GitLab for PR testing and public binary generation.
We should take advantage of this to test and distribute optimized binaries for popular ML
frameworks.
This is a pretty extensive initial set, including CPU, ROCm, and CUDA versions of a core
`x96_64_v4` stack.
### Core ML frameworks
These are all popular core ML frameworks already available in Spack.
- [x] PyTorch
- [x] TensorFlow
- [x] Scikit-learn
- [x] MXNet
- [x] CNTK
- [x] Caffe
- [x] Chainer
- [x] XGBoost
- [x] Theano
### ML extensions
These are domain libraries and wrappers that build on top of core ML libraries
- [x] Keras
- [x] TensorBoard
- [x] torchvision
- [x] torchtext
- [x] torchaudio
- [x] TorchGeo
- [x] PyTorch Lightning
- [x] torchmetrics
- [x] GPyTorch
- [x] Horovod
### ML-adjacent libraries
These are libraries that aren't specific to ML but are still core libraries used in ML pipelines
- [x] numpy
- [x] scipy
- [x] pandas
- [x] ONNX
- [x] bazel
Co-authored-by: Jonathon Anderson <17242663+blue42u@users.noreply.github.com>
* Add checksum for py-scikit-build 0.15.0 and use sources from pypi
* Update var/spack/repos/builtin/packages/py-scikit-build/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Add checksum for py-terminado 0.15.0
* Update var/spack/repos/builtin/packages/py-terminado/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* added metaphlan v4, cleaned up phylophlan
* added iqtree2
* fixed phylophlan, builds now
* changed config.yaml to default
* fixed style
* py-jsonschema: add 4.16.0 and new package py-hatch-fancy-pypi-readme (#32929)
* acfl: add v22.1 (#32915)
Co-authored-by: Annop Wongwathanarat <annop.wongwathanarat@arm.com>
* Fixup errors introduced by Clingo Pr: (#32905)
* re2c depends on cmake on Windows
* Winbison properly added to bootstrap package search list
* Set CMAKE_HIP_ARCHITECTURES with the value of amdgpu_target (#32901)
* libtiff: default to +zlib+jpeg (#32945)
* octave: add version 7.2.0 (#32943)
* simgrid new releases (#32920)
* [rocksdb] Added rtti variant (#32918)
* rvs binary path updated for 5.2 rocm release (#32892)
* Add checksum for py-pytest-runner 6.0.0 (#32957)
* py-einops: add v0.5.0 (#32959)
* Replace repo with the NVIDIA one (#32951)
* Add checksum for py-tomli 2.0.1 (#32949)
* QMCPACK: add @3.15.0 (#32931)
* Tidied up configure arguments to use special spack autotools features. (#32930)
* casper: old domain fell off, adding github repo (#32928)
* unifyfs: pin mercury version; add boost variant (#32911)
Mercury has a new version (v2.2) releasing soon that UnifyFS does not build with and hasn't been tested with. This pins UnifyFS to the last version of Mercury used/tested.
Add a variant to avoid building/using boost
Append -std=gnu99 to cflags if building with gcc@4. Needed for mochi-margo to compile
* trilinos: constrain superlu-dist version (#32889)
* trilinos: constrain superlu-dist version for 13.x
* syntax
* FEniCSx: Updates for 0.5.1 (#32665)
* Updates for DOLFINx 0.5.1 and associated packages
* xtensor needed on anything less than main
* Switch back to Python 3.7 minimum.
* Might be good to point out in our README how to fix Python version?
* Fix basix, xtensor dep
* Add numba feature
* Fix checksum
* Make slepc optional
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
* simgrid: add variant and remove flag (#32797)
* simgrid: remove std c++11 flag
* simgrid: add msg variant
* Axom: bring in changes from axom repo (#32643)
* bring in changes from axom repo
Co-authored-by: white238 <white238@users.noreply.github.com>
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
* Add checksum for py-pyparsing 3.0.9 (#32952)
* rdma-core: fix syntax for external discoverability (#32962)
* Add checksum for py-flatbuffers 2.0.7 (#32955)
* amrex: add v22.10 (#32966)
* Remove CMakePackage.define alias from most packages (#32950)
* Bug fix for `ca-certificates-mozilla/package.py` to enable `spack install --source` (#32953)
* made suggested changes to iqtree2, py-dendropy, py-metaphlan, and py-pkgconfig. Poetry install still broken
* reverted py-pkgconfig deps to poetry-core
* made iqtree2 less dedundant, changes to py-dendropy and py-pkgconfig deps
Co-authored-by: Manuela Kuhn <36827019+manuelakuhn@users.noreply.github.com>
Co-authored-by: Annop Wongwathanarat <annop.wongwathanarat@gmail.com>
Co-authored-by: Annop Wongwathanarat <annop.wongwathanarat@arm.com>
Co-authored-by: John W. Parent <45471568+johnwparent@users.noreply.github.com>
Co-authored-by: Auriane R <48684432+aurianer@users.noreply.github.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Kai Torben Ohlhus <k.ohlhus@gmail.com>
Co-authored-by: Vinícius <viniciusvgp@gmail.com>
Co-authored-by: Matthieu Dorier <mdorier@anl.gov>
Co-authored-by: renjithravindrankannath <94420380+renjithravindrankannath@users.noreply.github.com>
Co-authored-by: iarspider <iarspider@gmail.com>
Co-authored-by: Paul R. C. Kent <kentpr@ornl.gov>
Co-authored-by: Brian Van Essen <vanessen1@llnl.gov>
Co-authored-by: snehring <7978778+snehring@users.noreply.github.com>
Co-authored-by: Cameron Stanavige <stanavige1@llnl.gov>
Co-authored-by: Cody Balos <balos1@llnl.gov>
Co-authored-by: Jack S. Hale <mail@jackhale.co.uk>
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
Co-authored-by: Lucas Nesi <lucas31nesi@hotmail.com>
Co-authored-by: Chris White <white238@llnl.gov>
Co-authored-by: white238 <white238@users.noreply.github.com>
Co-authored-by: Martin Pokorny <mpokorny@caltech.edu>
Co-authored-by: Weiqun Zhang <WeiqunZhang@lbl.gov>
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
Co-authored-by: Dom Heinzeller <dom.heinzeller@icloud.com>
* filter_file: introduce argument 'start_at'
* autotools: extend patching of the libtool script
* autotools: refactor _patch_usr_bin_file
* autotools: improve readability of the filtering
* autotools: keep the modification time of the configure scripts
* autotools: do not try to patch directories
* autotools: explain libtool patching for posterity
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
Co-authored-by: Harmen Stoppels <harmenstoppels@gmail.com>
* Add checksum for py-onnxmltools 1.11.0
* Add checksum for py-onnxmltools 1.11.0
* Fix patch name
* Update var/spack/repos/builtin/packages/py-onnx-runtime/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Add checksum for py-pkginfo 1.8.3
* Update var/spack/repos/builtin/packages/py-pkginfo/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* trilinos and xyce: fix fortran library handling
xyce:
- add pymi_static_blas variant and logic
handles blas and hdf5 conflicts for Xyce-PyMi
- make +isorropia and +zoltan conditional on mpi
* xyce: clean up CMake options
* xyce: change pymi_static_blas to pymi_static_tpls
* xyce: made pymi_static_tpls only when +pymi
Remove `module-info mode load` condition that prevents auto-unloading when autoloading is enabled. It looks like this condition was added to work around an issue in environment-modules that is no longer necessary.
Add quotes to make is-loaded happy
* Add checksum for py-urllib3 1.26.12
* Update var/spack/repos/builtin/packages/py-urllib3/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Fixes from review
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Add checksum for py-soupsieve 2.3.2.post1
* Update package.py
* Update var/spack/repos/builtin/packages/py-soupsieve/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update to PyFR v1.15.0
* allow unsupported compilers for cuda
* update requirement for py-gimmik version
* update requirement for cuda version
* update versions, style fix
* lib directory changed, style fixes
* PYFR_METIS_LIBRARY_PATH set
There is a new OpenBLAS release out that can be compiled w/o
a Fortran compiler.
macOS XCode developers, rejoice. Maybe at some point Spack
becomes a package manager that can be used without using
another package manager (to get gfortran) 🎉
phist: add conflict on reference netlib-lapack due to API change in lapack.h
Co-authored-by: Harmen Stoppels <harmenstoppels@gmail.com>
* Added a package for the aws-ofi-nccl plug-in from to enable NCCL to
use libfabric communication library as a network provider.
Co-authored-by: Harmen Stoppels <harmenstoppels@gmail.com>
When concurrent misc_cache provider index rebuilds happen, try to
rebuild it only once, so we don't exceed misc_cache lock timeout.
For example, when using `spack env depfile`, with no previous
misc_cache, running `make -f depfile -j8` could run at most 8 concurrent
`spack install` locking on misc_cache to rebuild the provider index. If
one rebuild takes 30s, before this fix, the "worst" lock could wait up
to 30s * 7, easily exceeding misc_cache lock timeout. Now, the "worst"
lock would take 30s * 1 + ~1s * 6.
* Add checksums for Rivet 3.1.7 and YODA 1.9.7
* Add checksum for fastjet 3.4.0
* Add v3.1.7b...
... in which version requirement for autoconf was lowered to 2.68
Currently, module changes from `setup_dependent_package` are applied only to the module of the package class, but not to any parent classes' modules between the package class module and `spack.package_base`.
In this PR, we create a custom class to accumulate module changes, and apply those changes to each class that requires it. This design allows us to code for a single module, while applying the changes to multiple modules as needed under the hood, without requiring the user to reason about package inheritance.
* find/list: display package counts last
We have over 6,600 packages now, and `spack list` still displays the number of packages
before it lists them all. This is useless for large sets of results (e.g., with no args)
as the number has scrolled way off the screen before you can see it. The same is true
for `spack find` with large installations.
This PR changes `spack find` and `spack list` so that they display the package count
last.
* add some quick testing
Co-authored-by: Danny McClanahan <1305167+cosmicexplorer@users.noreply.github.com>
* Updates for DOLFINx 0.5.1 and associated packages
* xtensor needed on anything less than main
* Switch back to Python 3.7 minimum.
* Might be good to point out in our README how to fix Python version?
* Fix basix, xtensor dep
* Add numba feature
* Fix checksum
* Make slepc optional
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
Mercury has a new version (v2.2) releasing soon that UnifyFS does not build with and hasn't been tested with. This pins UnifyFS to the last version of Mercury used/tested.
Add a variant to avoid building/using boost
Append -std=gnu99 to cflags if building with gcc@4. Needed for mochi-margo to compile
Allow environment variables and spack-specific path substitution variables (e.g. `$spack`) to be
used in the paths associated with develop specs, while maintaining the ability to keep those
paths relative to the environment rather than the working directory.
* Added new versions
* New slate version
* Adding GPU support for lapackpp package
* Modified dependency on lapackpp
* Added rocblas and rocsolver to deps
* Testing with custom lapackpp repo
* Added chaining depends_on for +rocm
* Removing testing repo
* py-ipython: add 8.5.0 and py-win-unicode-console: new package
* Fix style
* Fix dependency version
* Deprecate version 2.3.1 and 3.1.0
* Always skip IPython.kernel
* Move skip_module definition to top
Install: Add use-buildcache option to install
* Allow differentiating between top level packages and dependencies when
determining whether to install from the cache or not.
* Add unit test for --use-buildcache
* Use metavar to display use-buildcache options.
* Update spack-completion
* Added a package for the aws-ofi-rccl plug-in from the ROCm software
stack. It allows RCCL to use the libfabric communication library.
Added support for using libfabric in Aluminum.
* Updated the run environment so that the plugin would get loaded.
* Added support for setting up the the LD_LIBRARY_PATH for dependent packages.
* Added package for RCCL tests to assess the impact of OFI libfabric RCCL plug-in.
* Add tag for xgboost 1.6.2
* Update py-xgboost as well
* Update package.py
* Update var/spack/repos/builtin/packages/py-xgboost/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* intel-oneapi-compilers-classic: refactor setup_run_environment
* intel-oneapi-compilers-classic: extend setup_run_environment with the one from intel-oneapi-compilers
* py-interface-meta: add 1.3.0 (incl new dependency packages)
* Update var/spack/repos/builtin/packages/py-poetry-dynamic-versioning/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
superlu:oneapi-deal with non ISO C99 complianc in the package.
The Intel OneAPI compilers are based on LLVM 14. A recent enhancement to LLVM -
https://reviews.llvm.org/D122983
results in superlu-dist not compiling because of some non ISO C99 compliant stuff.
A workaround is to use an llvm compile line option noted in the above URL.
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
Make it possible to install the Clingo package on Windows; this
also provides a means to use Clingo with Spack on Windows.
This includes
* A new "winbison" package: Windows has a port of bison and flex where
the two packages are grouped together. Clingo dependencies have been
updated to use winbison on Windows and bison elsewhere (this avoids
complicating the existin bison/flex packages until we can add support
for implied virtuals).
* The CMake build system was incorrectly converting CMAKE_INSTALL_PREFIX
to POSIX format.
* The re2c package has been modified to use CMake on Windows; for now
this is done by overloading the configure/build/install methods to
perform CMake-appropriate operations; the package should be refactored
once support for multiple build systems in one Package is available.
This commit fixes#27027.
The root cause of the issue is that the `SPACK_OLD_PROMPT` variable
was evaluated in string interpolation regardless of whether the
guard condition above evaluates to true or false. This commit uses
the `eval` keyword to defer evaluation until the command is executed.
Co-authored-by: Alexander Hornburg <alexande@xilinx.com>
The file rbg.txt is needed for many PGPLOT application, such as the MESA
stellar evolution code. This change installs the file to the PGPLOT_DIR,
where the library expects it.
PGPLOT_DIR was previously set to the prefix itself, which is an odd
place to install rgb.txt. This commit changes it to lib/pgplot5,
following the convention used by Debian.
Co-authored-by: Philipp Edelmann <edelmann@fs.tum.de>
* py-datalad-metalad: add 0.4.5
* Update var/spack/repos/builtin/packages/py-datalad-metalad/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
In addition to the new release, made intel-oneapi-compilers-classic version number match the compiler version number, instead of the version of the package that contains it.
Co-authored-by: Robert Cohn <robert.s.cohn@intel.com>
* root: make X11 really optional on macOS
* Update var/spack/repos/builtin/packages/root/package.py
* remove when clauses in provides
Co-authored-by: Hadrien G. <knights_of_ni@gmx.com>
This modifications breaks `develop` since it doesn't
pass audits with Python 2.7 It is to be investigated
why audits pass in CI for the PR and the issue is
revealed only when the package is pushed to develop.
PR #32615 deprecated Python versions up to 3.6.X. Since
the "build-systems" pipeline requires Python 3.6.15 to
build "tut", it will fail on the first rebuild that
involves Python.
The "tut" package is meant to perform an end-to-end
test of the "Waf" build-system, which is scarcely
used. The fix therefore is just to remove it from
the pipeline.
Spack currently depends on parsing filenames of downloaded files to
determine what type of archive they are and how to decompress them.
This commit adds a preliminary check based on magic numbers to
determine archive type (but falls back on name parsing if the
extension type cannot be determined).
As part of this work, this commit also enables decompression of
.tar.xz-compressed archives on Windows.
* Update py-poetry to 1.2.1
* Update py-xattr
* Apply style from review
* Apply suggestions from code review (part 1)
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Changes from review - 2
* Fix typo
* Fix style
* Add missing py-dulwich version
* Update var/spack/repos/builtin/packages/py-poetry-core/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-poetry/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-poetry/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Apply changes from review
* Add py-backports-cached-property and fix style
* Apply suggestions from code review
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* py-eccodes: ensure the minimal recommended shared version of libeccodes
* py-eccodes: set less general environment variables to enable location of libeccodes
* py-eccodes: add version 1.5.0
* py-eccodes: make flake8 happy
amazon linux 2 ships a glibc that is too old to work with cuda toolkit
for aarch64.
For example:
`libcurand.so.10.2.10.50` requires the symbol `logf@@GLIBC_2.27`, but
glibc is at 2.26.
So, these specs are removed.
* New packages: py-conan, py-node-semver, py-patch-ng
* Update var/spack/repos/builtin/packages/py-conan/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-conan/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* py-babel: add 2.10.3
* Update var/spack/repos/builtin/packages/py-babel/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* New package: py-jaraco-classes
* Update var/spack/repos/builtin/packages/py-jaraco-classes/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* [py-tinydb] added package py-tinydb
* [py-tinydb] corrected version in dependency for py-tinydb
* [py-tinydb] update python dependency
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* [py-tinydb] update dependency
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Include exception info related to url retrieval in debug messages
which otherwise would be swallowed. This is intended to be useful
for detecting if CA configuration interferes with downloads from
HTTPS links.
* add the 2 variants OPENCL and HIP and their dependencies correctly
for OPENCL - rocm-opencl, miopengemm and miopen-opencl
for HIP - miopen-hip
Earlier this was adding both the dependencies -miopen-hip and miopen-opencl
for both the backends which did not seem correct.
Also corrected the miopen-hip or miopen-opencl config.h in patch() depending on the
backend
Also added libjpeg-turbo as it is required for building ROCAl .
the AMDRpp is still required for ROCAL inclusion but it currently does not build
AMDRpp will be added as a new spack recipe and the mivisionx will refer to that as a
dependency in future.
* fix style errors
* bump up the version for 5.2.3 release. tested +opencl, +hip and ~hip~opencl(cpu backend)
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
* Initial opencatalyst proxy app spackage
Initial spackage for opencatalyst proxy app. Includes exposing of
versions in dependency spackages
* Verified Functionality and Spack Style
Verified build of mlperf-opencatalyst and fixed lingering spack style
issues
* Making requested changes to py-ocp
Making requested changed to spackage
* Further Requested Changes
Since fmt@9.0.0 and 9.1.0 were [added](6c4acfbf83) to spack a few days ago, gaudi fails to compile with default concretization. Since gaudi developers are usually paying attention to new versions of dependencies, I'm going to assume (perhaps optimistically) that the next bugfix version of gaudi will fix this (even though the issue has not been reported yet to Gaudi; I posted on the [key4hep public mirror](https://github.com/key4hep/Gaudi/issues/1)).
* Add fixed version 0.7.0 to cpu-features
* [@spackbot] updating style on behalf of iarspider
Co-authored-by: iarspider <iarspider@users.noreply.github.com>
* started updating multiqc package
* working now
* added py-rich-click
* fixed style
* changed py-matlibplot versions
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* changed py-networkx versions
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* changed py-coloredlogs versions
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* changed python versions
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* changed py-markdown versions
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* changed py-pyyaml requirement
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* changed py-requests requirements
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* changed py-spectra requirements
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Bump up the version for rocm-5.2.1-initial commit
* Bump up the version for rocm-5.2.1 release
* Bump up the version for rocm-5.2.1 release
* correct the PROF_API_HEADER_PATH to include
* Bump up the version of rocm-openmp-extras for rocm-5.2.1 release
* bump up the version of rocwmma for 5.2.1
* imagemagick: new variant ghostscript
Ghostscript adds about 75 dependencies to an installation of
imagemagick (97 without, 172 with Ghostscript). This adds a
variant (defaulting to true for backward compatibility) that
allows users to turn off Ghostscript support.
* imagemagick: be explicit when `--with-gslib`
* imagemagick: fix suggestion fail
* imagemagick: use spec.prefix.share.font
* imagemagick: default ghostscript false
* imagemagick: no need for join_path anymore
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
This PR deprecates using Spack to install [EOL Python versions](https://endoflife.date/python), including Python 2.7, 3.1–3.6. It also deprecates running Spack with Python 2.7. Going forward, we expect Spack to have the following Python support timeline.
### Running Spack
* Spack 0.18 (spring 2022): Python 2.7, 3.5–3.10
* Spack 0.19 (fall 2022): Python 2.7 (deprecated), 3.6–3.11
* Spack 0.20 (spring 2023): Python 3.6–3.11
### Building with Spack
* Spack 0.18 (spring 2022): Python 2.7, 3.1–3.10
* Spack 0.19 (fall 2022): Python 2.7, 3.1–3.6 (deprecated), 3.7–3.11
* Spack 0.20 (spring 2023): Python 3.7–3.11
This is a reboot of #28003. See #31824 for a detailed discussion of the motivation for this PR.
If you have concerns about this change, please comment on #31824.
* py-datalad: add 0.17.5
* Fix description of py-types-urllib3
* Update var/spack/repos/builtin/packages/py-datalad/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-datalad/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Add colorama dependency for windows
* Fix importlib-metadata dependency
* Update var/spack/repos/builtin/packages/py-pytest/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-pytest/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-pytest/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Use conflict to avoid dependency duplication
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Allow the nccl flag to be specified even for ROCm builds so that NCCL kernels are included in the build.
In this case the NCCL kernels will use RCCL as the backend implementation.
* Adding intel-oneapi-itac package
* Make black happy
* add rscohn2 as maintainer
* black prefers double quotes
Co-authored-by: Stephen Sachs <stesachs@amazon.com>
Co-authored-by: Robert Cohn <rscohn2@gmail.com>
* Don't run bootstrap on package only PRs
* Run bootstrap tests when ci.yaml is modified
* Test a package only PR
* Revert "Test a package only PR"
This reverts commit af96b1af60b0c31efcc9a2875ffb1a809ef97241.
Now that `podio` can support `cxxstd` variants 17 and 20, we can allow `edm4hep` to use `cxxstd=20` as well, but must ensure that `edm4hep` uses the same `cxxstd` variant as `podio`. Solution as in `celeritas`.
This fixes a bug where two installations that differ only by package hash will not show
up in `spack find`.
The bug arose because `_cmp_node` on `Spec` didn't include the package hash in its
yielded fields. So, any two `Spec` objects that were only different by package hash
would appear to be equal and would overwrite each other when inserted into the same
`dict`. Note that we could still *install* specs with different package hashes, and they
would appear in the database, but we code that needed to put them into data structures
that use `__hash__` would have issues.
This PR makes `Spec.__hash__` and `Spec.__eq__` include the `process_hash()`, and it
makes `Spec._cmp_node` include the package hash. All of these *should* include all
information in a spec so that we don't end up in a situation where we are blind to
particular field differences.
Eventually, we should unify the `_cmp_*` methods with `to_node_dict` so there aren't two
sources of truth, but this needs some thought, since the `_cmp_*` methods exist for
speed. We should benchmark whether it's really worth having two types of hashing now
that we use `json` instead of `yaml` for spec hashing.
- [x] Add `package_hash` to `Spec._cmp_node`
- [x] Add `package_hash` to `spack.solve.asp.spec_clauses` so that the `package_hash`
will show up in `spack diff`.
- [x] Add `package_hash` to the `process_hash` (which doesn't affect abstract specs
but will make concrete specs correct)
- [x] Make `_cmp_iter` report the dag_hash so that no two specs with different
process hashes will be considered equal.
* initial commit of 0.5.0 changes
* updated dependencies
* updated ffcx sha
* comment style
* llvm compilers
* introduce pugixml dependency for 0.5.0:
* update compilers to support C++20 features
* style fixes
* xtensor and xtl not needed for basix 0.5.0 and above
* Skip to Basix 0.5.1
The 0.5.1 release removes the C++ build dependency on Python that sneaked into the 0.5.0 build system.
* Improve depends on version ranges
* More dependency version improvements
Co-authored-by: Chris Richardson <chris@bpi.cam.ac.uk>
Co-authored-by: Garth N. Wells <gnw20@cam.ac.uk>
* added missing dependency for py-msgpack that breaks neovim
* Update var/spack/repos/builtin/packages/py-pynvim/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Robert Underwood <runderwood@anl.gov>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
The issue is that we are not not able to install (Fetch URL error) any
version of catalyst other than the specified in the spack package.py.
This very version is accessible only because it is cached by Spack. The
real URL does not exist anymore, I believe the reason is that there used
to be a tag in catalyst that does not exist anymore.
53a7b49 created a reference error which broke `.libs` (and
`find_libraries`) for many packages. This fixes the reference
error and improves the testing for `find_libraries` by actually
checking the extension types of libraries that are retrieved by
the function.
* catch json schema errors and reraise as property of SpackError
* no need to catch subclass of given error
* Builtin json library for Python 2 uses more generic type
* Correct instantiation of SpackError (requires a string rather than an exception)
* Use exception chaining (where possible)
* Add libraqm package
* py-pillow: Add optional raqm dependency/variant
* Use sha256
* Use " instead of '
* Use more explicit import
* Only add raqm from @8.4.0:
* Make the docstring shorter to satisfy flake
* Add conflict, silence warning, adjust version
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Add a post-install step which runs (only) on Windows to modify an
install prefix, adding symlinks to all dependency libraries.
Windows does not have the same concept of RPATHs as Linux, but when
resolving symbols will check the local directory for dependency
libraries; by placing a symlink to each dependency library in the
directory with the library that needs it, the package can then
use all Spack-built dependencies.
Note:
* This collects dependency libraries based on Package.rpath, which
includes only direct link dependencies
* There is no examination of libraries to check what dependencies
they require, so all libraries of dependencies are symlinked
into any directory of the package which contains libraries
UnifyFS:
- Add 1.0 release
- Deprecate older, unsupported versions
- Set fortran variant to true by default
- Update gotcha and mochi-margo dependency versions for unifyfs@1.0
and unifyfs@develop
- Add conflict of unifyfs with libfabric 1.13.* versions
- Update configure_args to use helper functions
GOTCHA: Hasn't been under active development for a couple years but
the develop branch has some fixes UnifyFS uses. To avoid having
UnifyFS v1.0 depend on a develop branch of a dependency, this creates
a new release in the Gotcha Spack package based on the most recent
commit of the develop branch.
* Adds hyperqueue package
* Adds maintainers
* Adds missing dockstring
* Bump year for Copyright
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
* Fixes checksum, selects preferred version
Don't use a release candidate as the default version
* Switch maintainer to one of the developers for HQ
* Update package.py
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
* Add new intel-mpi-benchmarks version
* Add new versions of intel mpi benchmarks
* Fix style bugs
* Fix style bugs
* Switch to using url_for_version formatting and improve patch ranges
* p2p benchmark is not included on older versions
* Set patch to proper version
* Add url field, improve patch versioning, improve version detection
* Add url field, improve patch versioning, improve version detection
* Bug fix
Syntax fix
* Remove 2019 from valid version on reorder_benchmark_macros patch
* OpenMPI isn't supported on older versions of the benchmark. Prevents OpenMPI from being selected on those versions
* Add new requirement of gmake for older versions
* Require intel-mpi for older versions of benchmark
* Minor changes to build directory for older versions
* Remove repeated conflict
* Minor style changes
* Minor change
* Correct fix for intel-mpi-benchmarks
* Bug fix
* Bug fix
* Attempted fix for install bug
* Attempted fix for install bug
* Remove duplicate build_directory setting
* new packages: py-arm-pyart and dependencies
- py-arm-pyart
- py-cylp
- rsl
* Update var/spack/repos/builtin/packages/py-cylp/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Fix dependencies
- xarray is not optional
- pandas is needed
- pylab is needed
- new package, py-pylab-sdk
- setuptools is needed at run time
* Patch for import of StringIO
* Update var/spack/repos/builtin/packages/py-arm-pyart/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Fix call to `StringIO` in patch
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* ci: restore coverage computation
* Mark "test_foreground_background" as xfail
* Mark "test_foreground_background_output" as xfail
* Make number of processes explicit, remove verbosity on linux
* Run coverage on just 3 Python jobs for linux
* Run coverage on just 3 Python jobs for linux
* Run coverage on just 2 Python jobs for linux
* Add back verbose, since before we didn't encounter the xdist internal error
* Reduce the workers to 2
* Try to use command line
* Fix a version cmp bug in asp.py
* Fix submodule bug for git refs
* Add branch in logic for submodules
* Fix git version comparisons
main does not satisfy git.foo=main
git.foo=main does satisfy main
* [py-python-bioformats] New package
* [py-python-bioformats] Added version 4.0.0
* [py-python-bioformats] Added types
* [py-python-bioformats] setuptools is build only
* [py-python-bioformats] fixup import
* [@spackbot] updating style on behalf of qwertos
Co-authored-by: James A Zilberman <jazrc@rit.edu>
Co-authored-by: qwertos <qwertos@users.noreply.github.com>
* Fixed the py-protobuf recipe so that when cpp support is require so
that it uses the same major and minor version range for the protobuf
package.
* Fixed the range bound for the 3.x py-protobuf packages.
Added mappings for 4.x py-protobuf packages to 3.x protobuf packages.
Removed a hash for v21.1 protobuf and replaced with v3.21.1 to keep a
standard versioning convention. Note that while Google has started
releasing both 3.x.y and a tag that dropped the leading 3. so it is
just x.y. This provides the appearance of a new major version, but
really is just a new minor version. These packages still report
versions as 3.x.y, so switching to versions and hashes with that
convention.
* Simplified constraints based on reviewer comments.
* Fixed flake8 errors
* Update var/spack/repos/builtin/packages/py-protobuf/package.py
* Fixed constraints on v2. versions and addressed Flake8 comments.
* Fixed flake8
* Fixed range dependencies for version 2.x
* Update var/spack/repos/builtin/packages/py-protobuf/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Fixed version ranges to skip unknown versions.
* Fixed the dependencies on protobuf to solve weird build issues.
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* ci: remove !docs from "core" filters
Written like it is now it causes package only PRs
to run with coverage.
* Try to skip job under condition, see if the workflow proceed
* Try to cancel a running CI job
* Simplify linux unit-tests, skip windows unit-tests on package PRs
* Reduce the inputs to unit-tests workflow
* Move control logic to main workflow, remove inputs
* Revert "Move control logic to main workflow, remove inputs"
This reverts commit 0c46fece4c.
* Do not compute "with_coverage" since it's always == to "core"
* Remove workflow dispatch from unit tests
* Revert "Revert "Move control logic to main workflow, remove inputs""
This reverts commit dd4e4a4e61.
* Try to skip all from the main workflow
* Add back bootstrap to needed checks for "all"
* Restore the correct logic for conditionals
* Versions added for each dep, but I think I'll need to remove them
* py-tesseract now builds and will import in python
* Fixed flake style error as raised by pipeline
* changed to proper python dependency
* added pil as a dependency
* Fixed flake style errors
* [py-pytesseract] py-pillow and py-wheel are redundant
* [py-pytesseract]
- fixed spelling
- removed unneeded dependency
* [py-pytesseract] update import
Co-authored-by: Viv Eric Hafener <vehrc@sporcbuild.rc.rit.edu>
* Add two no-op jobs named "all-prechecks" and "all"
These are a suggestion from @tgamblin, they are stable named markers we
can use from gitlab and possibly for required checks to make CI more
resilient to refactors changing the names of specific checks.
* Enable parallel testing using xdist for unit testing in CI
* Normalize tmp paths to deal with macos
* add -u flag compatibility to spack python
As of now, it is accepted and ignored. The usage with xdist, where it
is invoked specifically by `python -u spack python` which is then passed
`-u` by xdist is the entire reason for doing this. It should never be
used without explicitly passing -u to the executing python interpreter.
* use spack python in xdist to support python 2
When running on python2, spack has many import cycles unless started
through main. To allow that, this uses `spack python` as the
interpreter, leveraging the `-u` support so xdist doesn't error out when
it unconditionally requests unbuffered binary IO.
* Use shutil.move to account for tmpdir being in a separate filesystem sometimes
update libflame for work with crayCC, craycc, crayftn compiler wrappers. These lightweight compiler drivers do not add the `-L<lib_path>` like the CC/cc/ftn compiler drivers do. I've made a slight change to add the lib directories.
This change adds support for building the rocthrust tests and adds the `amdgpu_target`
variant to the `rocthrust` package.
- [x] rocthrust: add amdgpu_target and spack build test
- [x] Drop numactl as it is not a direct dependency
* add workaround for broken behavior in HIP
Hip has a longstanding cmake issue where they calculate include paths
incorrectly, this works around it for raja and adds an explicit rocprim
dependency.
* propagate openmp requirement and workaround to camp
* refactor and include umpire
* propagate openmp option to camp in umpire and use main camp for main and develop raja and umpire
* bump camp to new patch release
This patchset refactors our GitHub actions into a single top-level ci workflow that
invokes a series of reusable actions. The main goal of this is to be able to easily
control which tests run and in what order based on the success or failure of top-level
prechecks. Our previous workflows ran in three sets:
* nix tests: style and verification first, then linux and macos tests if successful
* windows tests: style and verification first, then linux and macos tests if successful
* bootstrap tests
As a result, the bootstrap tests ran even if the style failed, and style and verification
had to run on two different platforms despite running identical checks. I'm relatively
sure that's because of the limitation on dependencies between steps in the jobs.
Reusable workflows allow us to run the style, verification and now audit checks once,
then depending on the results, and the files changed, run the appropriate nix, windows
and bootstrap tests. While it saves only a few minutes by itself, this makes it easier to
refactor checks to subset tests without having to replicate tests or other workflow
components in the future.
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
Fix GCC compiler warnings due to not using C99 mode
CC should be overriden with Spack's value, and the other flags needed
to be copied from the Makefile.
Move the copying of the buildcache to a root job that runs after all the child
pipelines have finished, so that the operation can be coordinated across all
child pipelines to remove the possibility of race conditions during potentially
simlutandous copies. This lets us ensure the .spec.json.sig and .spack files
for any spec in the root mirror always come from the same child pipeline
mirror (though which pipeline is arbitrary). It also allows us to avoid copying
of duplicates, which we now do.
If you have an environment like
```
$ cat spack.yaml
spack:
specs: [openmpi@4.1.0+cuda]
```
this PR provides a new command `spack change` that you can use to adjust environment specs from the command line:
```
$ spack change openmpi~cuda
$ cat spack.yaml
spack:
specs: [openmpi@4.1.0~cuda]
```
in other words, this allows you to tweak the details of environment specs from the command line.
Notes:
* This is only allowed for environments that do not define matrices
* This is possible but not anticipated to be needed immediately
* If this were done, it should probably only be done for "named"/not-anonymous specs (i.e. we can change `openmpi+cuda` but not spec like `+cuda` or `@4.0.1~cuda`)
The building of tests is optional [as of 2.42.9](801eef111d). This applies this option in the build.
The reason the option was added was to deal with test build failures in sandboxed environments and with certain glibc versions (caused by glib gresources). For example, with the latest version glibc and in the latest version of docker these tests [cannot be built](https://github.com/moby/moby/issues/43595).
* llvm: fix 15.0.0rc builds on MacOS with command-line-tools
Ref: https://github.com/llvm/llvm-project/issues/57037
i.e use -DBUILTINS_CMAKE_ARGS=-DCOMPILER_RT_ENABLE_IOS=OFF. But this needs switching "compiler-rt" from "projects" to "runtimes".
Also fixing the warnings below fixes compile errors
CMake Warning at CMakeLists.txt:101 (message):
Using LLVM_ENABLE_PROJECTS=libcxx is deprecated now, please use
-DLLVM_ENABLE_RUNTIMES=libcxx or see the instructions at
https://libcxx.llvm.org/BuildingLibcxx.html for building the runtimes.
CMake Warning at CMakeLists.txt:101 (message):
Using LLVM_ENABLE_PROJECTS=libcxxabi is deprecated now, please use
-DLLVM_ENABLE_RUNTIMES=libcxxabi or see the instructions at
https://libcxx.llvm.org/BuildingLibcxx.html for building the runtimes.
CMake Warning at CMakeLists.txt:101 (message):
Using LLVM_ENABLE_PROJECTS=libunwind is deprecated now, please use
-DLLVM_ENABLE_RUNTIMES=libunwind or see the instructions at
https://libcxx.llvm.org/BuildingLibcxx.html for building the runtimes.
/private/var/folders/nt/_m1t_x7j76q6sl3xt91tqgs00000gn/T/balay/spack-stage/spack-stage-llvm-15.0.0-rc2-h2t5bohzyy7exz2ub3m42pfycjcmbndk/spack-build-h2t5boh/include/c++/v1/cstdlib:135:9: error: no member named 'at_quick_exit' in the global namespace
using ::at_quick_exit _LIBCPP_USING_IF_EXISTS;
~~^
* Update var/spack/repos/builtin/packages/llvm/package.py
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
fixes#31484
Before this change if anything was matching an external
condition, it was considered "external" and thus something
to be "built".
This was happening in particular to external packages
that were re-read from the DB, which then couldn't be
reused, causing the problems shown in #31484.
This PR fixes the issue by excluding specs with a
"hash" from being considered "external"
* Test that users have a way to select a virtual
This ought to be solved by extending the "require"
attribute to virtual packages, so that one can:
```yaml
mpi:
require: 'multi-provider-mpi'
```
* Prevent conflicts to be enforced on specs that can be reused.
* Rename the "external_only" fact to "buildable_false", to better reflect its origin
* py-breathe: add new version and improve version constraints
* py-breathe: everyone loves versions
```
py-breathe, py-breathe in the air
don't be afraid to care
````
* Update var/spack/repos/builtin/packages/py-breathe/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* add comment
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Preliminary support for include URLs in spack.yaml (environment) files
This commit adds support in environments for external configuration files obtained from a URL with a preference for grabbing raw text from GitHub and gitlab for efficient downloads of the relevant files. The URL can also be a link to a directory that contains multiple configuration files.
Remote configuration files are retrieved and cached for the environment. Configuration files with the same name will not be overwritten once cached.
Extend the semantics of package requirements to
allow using them also under a virtual package
attribute in packages.yaml
These requirements are enforced whenever that
virtual spec is present in the DAG.
Per #32214, the existing patch `92b2c...` for `gcc@11:` only applies
cleanly for `libzmq@4.3.3:4.3.4`. This PR adds a conflict for earlier
versions, as they cannot be patched due to different context.
For `gcc@11`, this leaves the most recent two versions available (a
satisfactory compromise).
For `gcc@12`, however, there is another existing conflict that makes
these most recent two versions unavailable. This PR adds an upstream
patch for the single most recent version that allows compilation with
`gcc@12` for that most recent version.
Starting point:
- `gcc@11` concretizes on all versions, attempts to apply patch on
`@4.2.3:4.3.4`, and only succeeds to apply patch on `@4.3.3:4.3.4`,
- `gcc@12` concretizes on `@:4.3.1` (and `@master`), attempts to apply
patch on `@4.2.3:4.3.1`, fails to apply patch on all.
Ending point:
- `gcc@11` concretizes on `@4.3.3:4.3.4` (and `@master`), attempts and
succeeds to apply patch on `@4.3.3:4.3.4`,
- `gcc@12` concretizes on `@4.3.4` (and `@master`), attempts and
succeeds to apply patch on `@4.3.4`.
Verified with environment build:
```yaml
spack:
specs:
- libzmq@4.3.4%gcc@12.1.0
- libzmq@4.3.4%gcc@11.3.0
- libzmq@4.3.3%gcc@11.3.0
view: false
```
which returns the following:
```console
16:14:47 wdconinc@menelaos ~/git/spack (libzmq-patch-gcc12 *+$%=) $
spack install --fresh
==> Installing environment libzmq
[+]
/opt/software/linux-ubuntu22.04-skylake/gcc-12.1.0/libmd-1.0.4-egpgd6eoaqtsl5fja2iwsl6gyc4o32p5
[+]
/opt/software/linux-ubuntu22.04-skylake/gcc-12.1.0/libsodium-1.0.18-af3rsfnvck6anxf7eeog3f2bph44tjia
[+]
/opt/software/linux-ubuntu22.04-skylake/gcc-12.1.0/pkgconf-1.8.0-z5of2hj2c6ygd3kxr4cwv7u7t42sxair
[+]
/opt/software/linux-ubuntu22.04-skylake/gcc-11.3.0/libmd-1.0.4-tec234gco2sd7n52dkwbrad43sdhaw4o
[+]
/opt/software/linux-ubuntu22.04-skylake/gcc-11.3.0/libsodium-1.0.18-uljf675u3yrn5c7fdjdpa5c7qnnkynke
[+]
/opt/software/linux-ubuntu22.04-skylake/gcc-11.3.0/pkgconf-1.8.0-l4hzc2g4pnn7dwyttphmxivt3xghvpoq
[+]
/opt/software/linux-ubuntu22.04-skylake/gcc-12.1.0/libbsd-0.11.5-fi3ri64moy45ksr4sf5pcwd6k23dsa4o
[+]
/opt/software/linux-ubuntu22.04-skylake/gcc-11.3.0/libbsd-0.11.5-2matmm7im7oygrr77k7wznttv4rbupfz
==> Installing libzmq-4.3.4-t7ad54q3atrnte4rzq7g7cfjcw5227pr
==> No binary for libzmq-4.3.4-t7ad54q3atrnte4rzq7g7cfjcw5227pr found:
installing from source
==> Fetching
c593001a89.tar.gz
==> Fetching
310b8aa57a
==> Fetching
https://github.com/zeromq/libzmq/pull/4334.patch?full_index=1
==> Applied patch
92b2c38a2c.patch?full_index=1
==> Applied patch
https://github.com/zeromq/libzmq/pull/4334.patch?full_index=1
==> libzmq: Executing phase: 'autoreconf'
==> libzmq: Executing phase: 'configure'
==> libzmq: Executing phase: 'build'
==> libzmq: Executing phase: 'install'
==> libzmq: Successfully installed
libzmq-4.3.4-t7ad54q3atrnte4rzq7g7cfjcw5227pr
Fetch: 0.61s. Build: 1m 31.57s. Total: 1m 32.18s.
[+]
/opt/software/linux-ubuntu22.04-skylake/gcc-12.1.0/libzmq-4.3.4-t7ad54q3atrnte4rzq7g7cfjcw5227pr
==> Installing libzmq-4.3.3-pxrd6piprucu65bkro2ixms6d3x2eudz
==> No binary for libzmq-4.3.3-pxrd6piprucu65bkro2ixms6d3x2eudz found:
installing from source
==> Fetching
9d9285db37.tar.gz
==> Using cached archive:
/home/wdconinc/.spack/cache/_source-cache/archive/31/310b8aa57a8ea77b7ac74debb3bf928cbafdef5e7ca35beaac5d9c61c7edd239
==> Applied patch
92b2c38a2c.patch?full_index=1
==> libzmq: Executing phase: 'autoreconf'
==> libzmq: Executing phase: 'configure'
==> libzmq: Executing phase: 'build'
==> libzmq: Executing phase: 'install'
==> libzmq: Successfully installed
libzmq-4.3.3-pxrd6piprucu65bkro2ixms6d3x2eudz
Fetch: 0.93s. Build: 11.55s. Total: 12.48s.
[+]
/opt/software/linux-ubuntu22.04-skylake/gcc-11.3.0/libzmq-4.3.3-pxrd6piprucu65bkro2ixms6d3x2eudz
==> Installing libzmq-4.3.4-hiil6dzy2reb4nk555zztwh44rpbyv4h
==> No binary for libzmq-4.3.4-hiil6dzy2reb4nk555zztwh44rpbyv4h found:
installing from source
==> Using cached archive:
/home/wdconinc/.spack/cache/_source-cache/archive/c5/c593001a89f5a85dd2ddf564805deb860e02471171b3f204944857336295c3e5.tar.gz
==> Using cached archive:
/home/wdconinc/.spack/cache/_source-cache/archive/31/310b8aa57a8ea77b7ac74debb3bf928cbafdef5e7ca35beaac5d9c61c7edd239
==> Applied patch
92b2c38a2c.patch?full_index=1
==> libzmq: Executing phase: 'autoreconf'
==> libzmq: Executing phase: 'configure'
==> libzmq: Executing phase: 'build'
==> libzmq: Executing phase: 'install'
==> libzmq: Successfully installed
libzmq-4.3.4-hiil6dzy2reb4nk555zztwh44rpbyv4h
Fetch: 0.01s. Build: 10.77s. Total: 10.78s.
[+]
/opt/software/linux-ubuntu22.04-skylake/gcc-11.3.0/libzmq-4.3.4-hiil6dzy2reb4nk555zztwh44rpbyv4h
```
* ddt: Initial commit
* ddt: Minor change to license date to appease the CI gods
* Get rid of unattractive extra line
* Switch to sha256 instead of md5
* Initial Draft of E3SM-Kernels Spackage
Initial draft of E3SM-Kernels. Currently no support for nested_loops due
to build system limitations
* Style Check and Fixed gfortran Check
Fixed style issues and changed gnu toolchain check to a gfortran check
due to hybrid compilers (e.g. clang+gfortran)
* Fixed Style Issues
* tixi: new variants (fortran,shared)
Since some tixi 3 versions, additional CMake flags are needed to build
tixi with shared libraries, respectively with Fortran support.
* tixi: fix style
* Changes for ROCm-5.2.0 changes and new recipe rocwmma
* modify the maintainers for hipify-clang
* address review comments
* update the rocwmma new recipe as per latest syntax
* fix style errors
* modify the patch file to provide the details about the patch
* fix style errors
* whizard: Fix passing of build options, update versions
The dependency of whizard on libtirpc is now correctly passed down as
an autotools option.
Update known versions of package with 3.0.2 and 3.0.3.
* Express path to headers via spec object methods
Allow users to express default requirements in packages.yaml.
These requirements are overridden if more specific requirements
are present for a given package.
* cpu-features: fix fetch failure
`master` branch was renamed to `main`
* Update var/spack/repos/builtin/packages/cpu-features/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* [py-loguru] New package
* [py-loguru] Removed commented out line
* [py-loguru] Added types removed extra dependencies
* [py-loguru] missing windows dependency. listing windows as a conflict for now
* [py-loguru] depends on py-colorama when platform=windows
* [py-loguru] flake8
* [py-loguru] Import update
* [py-loguru]
- python is a runtime dependency
- setuptools is a build dependency
* [@spackbot] updating style on behalf of qwertos
Co-authored-by: James A Zilberman <jazrc@rit.edu>
Co-authored-by: qwertos <qwertos@users.noreply.github.com>
* libfabric: add new versions
1.15.0, 1.15.1, main (previously named master)
* Add OPX fabric option, with conflict for versions before v1.15.0
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
* geant4: use define function
* geant4: Change new feature from conflicts to when
* geant4: add support/conflicts for nvhpc
* fixup! geant4: add support/conflicts for nvhpc
This support requires adding the '--tests' option to 'spack ci rebuild'.
Packages whose stand-alone tests are broken (in the CI environment) can
be configured in gitlab-ci to be skipped by adding them to
broken-tests-packages.
Highlights include:
- Restructured 'spack ci' help to provide better subcommand summaries;
- Ensured only one InstallError (i.e., installer's) rather than allowing
build_environment to have its own; and
- Refactored CI and CDash reporting to keep CDash-related properties and
behavior in a separate class.
This allows stand-alone tests from `spack ci` to run when the `--tests`
option is used. With `--tests`, stand-alone tests are run **after** a
**successful** (re)build of the package. Test results are collected
and report(able) using CDash.
This PR adds the following features:
- Adds `-t` and `--tests` to `spack ci rebuild` to run stand-alone tests;
- Adds `--fail-fast` to stop stand-alone tests after the first failure;
- Ensures a *single* `InstallError` across packages
(i.e., removes second class from build environment);
- Captures skipping tests for externals and uninstalled packages
(for CDash reporting);
- Copies test logs and outputs to the CI artifacts directory to facilitate
debugging;
- Parses stand-alone test results to report outputs from each `run_test` as
separate test parts (CDash reporting);
- Logs a test completion message to allow capture of timing of the last
`run_test` part;
- Adds the runner description to the CDash site to better distinguish entries
in CDash tables;
- Adds `gitlab-ci` `broken-tests-packages` to CI configuration to skip
stand-alone testing for packages with known issues;
- Changes `spack ci --help` so description of each subcommand is a single line;
- Changes `spack ci <subcommand> --help` to provide the full description of
each command (versus no description); and
- Ensures `junit` test log file ends in an `.xml` extension (versus default where
it does not).
Tasks:
- [x] Include the equivalent of the architecture information, or at least the host target, in the CDash output
- [x] Upload stand-alone test results files as `test` artifacts
- [x] Confirm tests are run in GitLab
- [x] Ensure CDash results are uploaded as artifacts
- [x] Resolve issues with CDash build-and test results appearing on same row of the table
- [x] Add unit tests as needed
- [x] Investigate why some (dependency) packages don't have test results (e.g., related from other pipelines)
- [x] Ensure proper parsing and reporting of skipped tests (as `not run`) .. post- #28701 merge
- [x] Restore the proper CDash URLand or mirror ONCE out-of-band testing completed
* gaudi: consistent test dependencies when +examples
Gaudi requires testing to be enabled for examples to be built, so all
test dependencies are also there for `+examples`. This PR fixes a
missing pytest dependency when `+examples` is used but no testing is
enabled. The construct with the loop is to ensure the identical
dependencies are always used, even as version ranges my start to differ.
Testing with gaudi_add_tests was added in v35r0. Some nosetests and
QMtests were in the tree before, but not accessible it seems. The
effective dependency since 35.0 is also applied for pytest, extending
the range that was there before disentangling `optional`, at
9d67d1e034/var/spack/repos/builtin/packages/gaudi/package.py
* gaudi: version 36.7 in other PR...
The "release" tarball provided by github lacks several files in
the SFconv/expat/xmlparse directory, including xmlparse. Using
tarballs based off of version tags solves the problem.
o Changes version() to use commits associated with version tags.
o Adds several additional versions.
o Adds myself as maintainer.
o Adds hook to execute autogen.sh.
o Adds autotools &ct dependences.
o Removes expat dependence.
* openmc: add v0.13.1
* Add @paulromano as maintainer of openmc and py-openmc
* Address review comments from @adamjstewart
* Add back MPI variant in openmc package
In a fast-moving project with as many forks as LLVM, it's difficult to
accurately determine if a function exists just by checking the version
number. The existing version check fails, for example, with llvm-amdgpu
from ROCm 4.5. It is more robust to directly check if the function
exists.
Added the SHA256 for version 6.3.2 and added logic to eal with the change of naming pattern for the makefile.include files that now appears to leave out the "linux_" prefix. (Changes should be. backwards compatible.)
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
Co-authored-by: alansill <alansill@users.noreply.github.com>
* modified list.py and added functionality for --tag
* Removed long and very long, shifted rest of code above return statement
* removed results variable
* added import statement at top
* added the line accidentally deleted
* added line accidentally deleted
* changed p.name to p, added line inside if statement
* line order switched
* [@spackbot] updating style on behalf of sparkyniner
* ran update completion command
* add tests
* Update lib/spack/spack/test/cmd/list.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* [@spackbot] updating style on behalf of sparkyniner
* changed argument to mock_packages and moved code under filter by tag
* removed bad rebase code and added additional test
* [@spackbot] updating style on behalf of sparkyniner
* added line removed earlier
* added line removed earlier
* replaced function
* added more recommended changes
Co-authored-by: sairaj <sairaj@sairajs-MacBook-Pro.local>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* VTK-h: don't assume I have Fortran
Don't assume I have a working Fortran compiler in my toolchain :)
* Conduit: Do not Assume Fortran
* Ascent: Do not Assume Fortran
* fix style
* Build Tensorflow using the fork for rocm. Initial commit
* re-order the versions
* fix style errors
* address review comments
* add conflicts for rocm version
* address review comments
* remove rocm variant as its added by ROCmPackage
* add mothra tests
* py-globus-sdk: add new versions; unpin py-cryptography version constraint
* Update var/spack/repos/builtin/packages/py-globus-sdk/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* py-pyjwt: fix py-cryptography version constraints
* Update var/spack/repos/builtin/packages/py-pyjwt/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* ForTrilinos: new versions 2.0.1, 2.1.0
I also had to update the checksum for the released 2.0.0: see #32000 for
the explanation and solution to keep this from happening again.
* Soooo stylish
Assertions without messages if/when hit create a blank error message for users.
This PR adds error messages to all assertions in asp.py even
if it seems unlikely they will ever be needed.
* Sensei: Refactor package to work with v4.0.0
* Add missing MPI dependency
* Patch bug in libsim adapter
* Simplify conflicts with when-clauses
* Conflict variants that are incompatible (catalyst/libsim/ascent)
* Fix paraview version constraints to be more clear
* Add version constraints for VTK
* Drop unneeded visit restrictions
* Specify +vtkm dependency on ParaView's VTKm
* +hl is not needed for VTK, and is already specified in the VTK recipe
when it is needed
* Pass paths for adios2 and ascent packages
* ECP-SDK: Enable sensei
* CI: Add sensei to the data-vis-sdk pipeline
* Sensei: Change VISIT_DIR to work on linux
* Fixup: style check
* Sensei: Add patch for version detection
* CI: revert SDK pipeline in favor of new matrices
* Sensei: Formatting fixes
The argument is very likely a typo, and was meant to
be given to the fixture decorator. Since the value
being passed is the default, let's just remove it.
* metaeuk: new package
* sepp: new package
* busco: adding version 5.4.3
* busco: adding maintainers
* metauk: more accurate cmake dep
* sepp: adding missing dep and accurate python dep
* sepp: remove install_tree
* sepp: extend python
Ensure that build tools with module-level commands in spack use
the version built as part of their build graph if one exists.
This is now also required for mesa, scons, cmake and ctest, out
of graph versions of these tools in path will not be found unless
added as an external.
This bug appeared because a new version of rocprim needs cmake
3.16, while I have 3.14 in my path I had added an external for
cmake 3.20 to the dag, but 3.14 was still used to configure
rocprim causing it to fail. As far as I can tell, all the build
tools added in build_environment.py had this problem, despite the
fact that they should have been resolving these tools by name
with a path search and find the one in the dag that way. I'm
still investigating why the path searching and Executable logic
didn't do it, but this makes three of the build systems much more
explicit, and leaves only gmake and ninja as dependencies from
out in the system while ensuring the version in the dag is used
if there is one.
The additional sqlite version is to perturb the hash of python to
work around a relocation bug which will be fixed in a subsequent
PR.
The Python that comes with XCode command line tools is a bit weird.
This fixes two issues that were preventing it from bootstrapping:
- [x] CommandLineTools python does not come with a `python-config` executable. If you
don't have one of these, CMake's FindPython will, for some reason, assume that you
want Python 2, so you need to set `CLINGO_PYTHON_VERSION` to ensure that clingo
tells `find_package(Python <VERSION>)` the right thing.
- [x] We weren't setting `PYTHONHOME` correctly in Python's `package.py`. We were
setting it to the `prefix` from Python `sysconfig`, but `prefix` tells you where
the executable lives. CommandLineTools python reports its prefix as
/Applications/Xcode.app/Contents/Developer/Library/Frameworks/Python3.framework/Versions/3.8
but that doesn't exist. It looks like Apple builds the full python and just copies
pieces of it into command line tools. PYTHONHOME is supposed to tell you where the
default python library location is. So you have to look at the `base`, which
`sysconfig` reports as
/Library/Developer/CommandLineTools/Library/Frameworks/Python3.framework/Versions/3.8
On most systems this is probably the same as `prefix`, but not with
CommandLineTools, which has its system library in a different place.
The second change here was cherry-picked to 0d981a012d before merging and doesn't show
up here.
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
- [x] Rework `headers` to search a sequence of directories and to display all searched
locations on error, as opposed to handling each directory with a variable
- [x] Make `headers` and `libs` do the same type of search and raise the same sort of
errors.
Co-authored-by: Todd Gamblin <tgamblin@llnl.gov>
* [py-bitshuffle] New package
* [py-bitshuffle] compiling against spack hdf5
* [py-bitshuffle] flake8
* [py-bitshuffle] update import ine
* [@spackbot] updating style on behalf of qwertos
Co-authored-by: James A Zilberman <jazrc@rit.edu>
Co-authored-by: qwertos <qwertos@users.noreply.github.com>
We're seeing errors pop up with older versions of Kokkos and newer versions of
`oneapi`, specifically:
error: no member named 'ONEAPI' in namespace 'sycl'
This hapens because `sycl::ONEAPI` is `sycl::ext::oneapi` since oneapi `2022.0.0`.
`kokkos@3.6:` uses the new namespace. A conflict was present for this, but it was too
specific -- both to `dpcpp` and to the `2022.0.0` version.
- [x] Expand version ranges in `kokkos` conflict
- [x] Add conflict for `oneapi` in addition to `dpcpp`
* filesystem: use lstat in recursive mtime
When a `develop` path contains a dead symlink, the `os.stat` in the recursive `mtime` determination trips up over it.
Closes#32165.
`requirement_policy/3` is generated and may not be in Spack's inputs to Clingo.
Currently this is causing warnings like:
```
$ spack spec zlib
/global/u2/t/tgamblin/src/spack/lib/spack/spack/solver/concretize.lp:510:3-43: info: atom does not occur in any rule head:
requirement_policy(Package,X,"one_of")
/global/u2/t/tgamblin/src/spack/lib/spack/spack/solver/concretize.lp:517:3-43: info: atom does not occur in any rule head:
requirement_policy(Package,X,"one_of")
/global/u2/t/tgamblin/src/spack/lib/spack/spack/solver/concretize.lp:523:3-43: info: atom does not occur in any rule head:
requirement_policy(Package,X,"any_of")
/global/u2/t/tgamblin/src/spack/lib/spack/spack/solver/concretize.lp:534:3-43: info: atom does not occur in any rule head:
requirement_policy(Package,X,"any_of")
Input spec
--------------------------------
zlib
Concretized
--------------------------------
zlib@1.2.11%gcc@7.5.0+optimize+pic+shared arch=cray-sles15-haswell
```
- [x] Silence warning with `#defined requirement_policy/3`
Spack doesn't have an easy way to say something like "If I build
package X, then I *need* version Y":
* If you specify something on the command line, then you ensure
that the constraints are applied, but the package is always built
* Likewise if you `spack add X...`` to your environment, the
constraints are guaranteed to hold, but the environment always
builds the package
* You can add preferences to packages.yaml, but these are not
guaranteed to hold (Spack can choose other settings)
This commit adds a 'require' subsection to packages.yaml: the
specs added there are guaranteed to hold. The commit includes
documentation for the feature.
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
* celeritas: update checksum for git describe difference
Using `$Format:%h$` and the export-subst gitattribute property mean that
the release checksum can change post release...
```
$ diff -ru spack-stage-celeritas-0.1.0-hv7ewpjouekqws2y5iaql2cnp6tn76iz/ spack-stage-celeritas-0.1.0.wtf-ynyck3df2a7kkgkqrpwapgz3l2i62omz/
diff -ru spack-stage-celeritas-0.1.0-hv7ewpjouekqws2y5iaql2cnp6tn76iz/spack-src/cmake/CgvFindVersion.cmake spack-stage-celeritas-0.1.0.wtf-ynyck3df2a7kkgkqrpwapgz3l2i62omz/spack-src/cmake/CgvFindVersion.cmake
--- spack-stage-celeritas-0.1.0-hv7ewpjouekqws2y5iaql2cnp6tn76iz/spack-src/cmake/CgvFindVersion.cmake 2022-07-31 19:45:03.000000000 -0400
+++ spack-stage-celeritas-0.1.0.wtf-ynyck3df2a7kkgkqrpwapgz3l2i62omz/spack-src/cmake/CgvFindVersion.cmake 2022-07-31 19:45:03.000000000 -0400
@@ -75,7 +75,7 @@
# Get a possible Git version generated using git-archive (see the
# .gitattributes file)
- set(_ARCHIVE_TAG "HEAD -> master, tag: v0.1.0")
+ set(_ARCHIVE_TAG "tag: v0.1.0")
set(_ARCHIVE_HASH "04fe945d9")
set(_TAG_REGEX "v([0-9.]+)(-dev[0-9.]+)?")
Binary files spack-stage-celeritas-0.1.0-hv7ewpjouekqws2y5iaql2cnp6tn76iz/v0.1.0.tar.gz and spack-stage-celeritas-0.1.0.wtf-ynyck3df2a7kkgkqrpwapgz3l2i62omz/v0.1.0.tar.gz differ
```
* celeritas: Use exported and re-uploaded tar.gz for reproducibility
All PRs are failing the docs build on account of an error with
pygments. These errors coincide with a new release of pygments
(2.13.0) and restricting to < 2.13 allows the doc tests to pass,
so this commit enforces that constraint for the docs build.
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
A few attribute in packages are meant to be reserved for
Spack internal use. This audit checks packages to ensure none
of these attributes are overridden.
- [x] add additional audit check
In file included from /data/xsdkci/VS1mJQ1K/0/xsdk-project/spack-xsdk/spack-stage/balay/spack-stage-oce-0.18.3-rim5zhuacb7z4plxag52fjj3gbc4znv3/spack-src/src/OSD/OSD_Parallel.cxx:17:
/data/xsdkci/VS1mJQ1K/0/xsdk-project/spack-xsdk/spack-stage/balay/spack-stage-oce-0.18.3-rim5zhuacb7z4plxag52fjj3gbc4znv3/spack-src/src/OSD/OSD_Parallel.hxx: In static member function 'static void OSD_Parallel::ForEach(InputIterator, InputIterator, const Functor&, Standard_Boolean)':
/data/xsdkci/VS1mJQ1K/0/xsdk-project/spack-xsdk/spack-stage/balay/spack-stage-oce-0.18.3-rim5zhuacb7z4plxag52fjj3gbc4znv3/spack-src/src/OSD/OSD_Parallel.hxx:223:18: error: 'captured_exception' in namespace 'tbb' does not name a type
223 | catch ( tbb::captured_exception& anException )
| ^~~~~~~~~~~~~~~~~~
/data/xsdkci/VS1mJQ1K/0/xsdk-project/spack-xsdk/spack-stage/balay/spack-stage-oce-0.18.3-rim5zhuacb7z4plxag52fjj3gbc4znv3/spack-src/src/OSD/OSD_Parallel.hxx:225:38: error: 'anException' was not declared in this scope
225 | Standard_NotImplemented::Raise(anException.what());
| ^~~~~~~~~~~
/data/xsdkci/VS1mJQ1K/0/xsdk-project/spack-xsdk/spack-stage/balay/spack-stage-oce-0.18.3-rim5zhuacb7z4plxag52fjj3gbc4znv3/spack-src/src/OSD/OSD_Parallel.hxx: In static member function 'static void OSD_Parallel::For(Standard_Integer, Standard_Integer, const Functor&, Standard_Boolean)':
/data/xsdkci/VS1mJQ1K/0/xsdk-project/spack-xsdk/spack-stage/balay/spack-stage-oce-0.18.3-rim5zhuacb7z4plxag52fjj3gbc4znv3/spack-src/src/OSD/OSD_Parallel.hxx:272:18: error: 'captured_exception' in namespace 'tbb' does not name a type
272 | catch ( tbb::captured_exception& anException )
| ^~~~~~~~~~~~~~~~~~
/data/xsdkci/VS1mJQ1K/0/xsdk-project/spack-xsdk/spack-stage/balay/spack-stage-oce-0.18.3-rim5zhuacb7z4plxag52fjj3gbc4znv3/spack-src/src/OSD/OSD_Parallel.hxx:274:38: error: 'anException' was not declared in this scope
274 | Standard_NotImplemented::Raise(anException.what());
| ^~~~~~~~~~~
`setup_dependent_build_environment(self, env, dependent_spec)` does not have a variable `spec`.
This causes several issues right now:
```console
==> Installing gaudi-36.6-cjjrpjwpcqrtojyrdqml3jpzkbn55hpb
==> No binary for gaudi-36.6-cjjrpjwpcqrtojyrdqml3jpzkbn55hpb found: installing from source
==> Error: NameError: name 'spec' is not defined
/home/wdconinc/git/spack/var/spack/repos/builtin/packages/root/package.py:614, in setup_dependent_build_environment:
611 env.prepend_path("ROOT_INCLUDE_PATH", dependent_spec.prefix.include)
612 if "+rpath" not in self.spec:
613 env.prepend_path("LD_LIBRARY_PATH", self.prefix.lib.root)
>> 614 if "platform=darwin" in spec:
615 # Newer deployment targets cause fatal errors in rootcling
616 env.unset("MACOSX_DEPLOYMENT_TARGET")
```
On PR pipelines we need to override the buildcache destination to
point to the "spack-binaries-prs" bucket, otherwise, those pipelines
try to push to the default mirror in a bucket for which they don't
have write permission.
This PR fixes the performance regression reported in #31985 and a few
other issues found while refactoring the spack mirror create command.
Modifications:
* (Primary) Do not require concretization for
`spack mirror create --all`
* Forbid using --versions-per-spec together with --all
* Fixed a few issues when reading specs from input file (specs were
not concretized, command would fail when trying to mirror
dependencies)
* Fix issue with default directory for spack mirror create not being
canonicalized
* Add more unit tests to poke spack mirror create
* Skip externals also when mirroring environments
* Changed slightly the wording for reporting (it was mentioning
"Successfully created" even in presence of errors)
* Fix issue with colify (was not called properly during error
reporting)
* [py-pynndescent] New package
* [py-pynndescent] Removed white space
* [py-pynndescent] fixed dependencies
* [py-pynndescent] flake8
* [py-pynndescent] Import update
Co-authored-by: James A Zilberman <jazrc@rit.edu>
- [x] Add release v0.2 of the AML package, deprecate v0.1, and add support for
OpenCL, HIP, and CUDA variants of the library. Also update repo and
release URL, as the previous one is not accessible anymore.
- [x] aml: add oneapi-level-zero support
- [x] Change openmp flags to force compatibility when compiling with
intel-oneapi compilers.
`LD_LIBRARY_PATH` can break system executables (e.g., when an enviornment is loaded) and isn't necessary thanks to `RPATH`s. Packages that require `LD_LIBRARY_PATH` can set this in `setup_run_environment`.
- [x] Prefix inspections no longer set `LD_LIBRARY_PATH` by default
- [x] Document changes and workarounds for people who want `LD_LIBRARY_PATH`
These changes make many packages build on nixos where nearly nothing
comes from /bin or /usr/bin (the only things in "system locations" are
/bin/sh and /usr/bin/env, all the rest is found through PATH).
Many configuration scripts hardcode /usr/bin/file instead of using the
one from PATH. This patches them to use file from PATH.
* ADIOS2: ZFP<1.0
The tagged ADIOS2 releases in Spack (and develop) do not yet
work with ZFP 1.0. Express valid depedency range before someone
updates the ZFP package and triggers the incompatibility.
* Use semver
* flux packages used in a spack view will already be unshallow
and this particular command will error and break the entire build. Instead
we want to catch the ProcessError and allow for a regular fetch.
* final tweaks to add missing sqlite and fallback to fetch
Signed-off-by: vsoch <vsoch@users.noreply.github.com>
fixes#31736
Catch errors when concretizing specs and report them as
debug messages. The corresponding spec is skipped.
Co-authored-by: Greg Becker <becker33@llnl.gov>
* Extracted two functions in cmd/install.py
* Extracted a function to perform installation from the active environment
* Rename a few functions, remove args from their arguments
* Rework conditional in install_from_active_environment to reduce nesting in the function
* Extract functions to parsespecs from cli and files
* Extract functions to getuser confirmation for overwrite
* Extract functions to install specs inside and outside environments
* Rename a couple of functions
* Fix outdated comment
* Add missing imports
* Split conditional to dedent one level
* Invert check and exit early to dedent one level when requiring user confirmation
* tassel: add version 3.0.174
fix naming of 5.2.39 from "2017-07-22"
* changed single quotes to double quotes to appease the gods ;)
* fixed style issues
The current use of git ref's as a version requires a search algorithm to pick the right matching version based on the tags in the git history of the package.
This is less than ideal for the use case where users already know the specific version they want the git ref to be associated with. This PR makes a new version syntax [package]@[ref]=[version] to allow the users to specify the exact hash they wish to use.
* Add checksum for py-arror 1.2.1 and 1.2.2
* Update package.py
* Update var/spack/repos/builtin/packages/py-arrow/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update package.py
* Update package.py
* Update package.py
* Update package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* [py-glymur] New Package: py-glymur
* [py-glymur] fixed copyright line
* [py-glumur] update import ine
* [@spackbot] updating style on behalf of qwertos
Co-authored-by: James A Zilberman <jazrc@rit.edu>
Co-authored-by: qwertos <qwertos@users.noreply.github.com>
There is a problem with the git repo for rhtslib that apparently led to
a bad version entry during the previous round of package updates. A git
checkout on the commit also fails so use branch for most recent version.
* new package: alphafold
and related dependencies, depends on #27138
* [@spackbot] updating style on behalf of aweits
* fix
Co-authored-by: aweits <aweits@users.noreply.github.com>
On some systems the shell in login mode wipes important parts of the
environment, such as PATH. This causes the build to fail since it can't
find `spack`.
For better robustness, don't use a login shell.
In a full CI job the final spack install is run in an environment formed by scripts running in this order:
export AWS_SECRET=... # 1. Load environment from GitLab project variables
source spack/share/spack/setup-env.sh # 2. Load Spack into the environment (PATH)
spack env activate -V concrete_env # 3. Activate the concrete environment
source /etc/profile # 4. Bash login shell (from -l)
spack install ...
Whereas when a user launches their own container with (docker|podman) run -it, they end up running spack install in an environment formed in this order:
source /etc/bash.bashrc # (not 4). Bash interactive shell (default with TTY)
export AWS_SECRET=... #~1. Manually load environment from GitLab project variables
source spack/share/spack/setup-env.sh # 2. Load Spack into the environment (PATH)
spack env activate -V concrete_env # 3. Activate the concrete environment
spack install ...
The big problem being that (4) has a completely different position and content (on Leap 15 and possibly other containers).
So in context, this PR removes (4) from the CI job case, leaving us with the simpler:
export AWS_SECRET=... # 1. Load environment from GitLab project variables
source spack/share/spack/setup-env.sh # 2. Load Spack into the environment (PATH)
spack env activate -V concrete_env # 3. Activate the concrete environment
spack install ...
* database: don't sort on return from query_local
* ASP-based solver: don't build the hash-lookup dictionary twice
Building this dictionary twice and traversing all the specs
might be time-consuming for large buildcaches.
This test relied on an old version of the `flake8_package` fixture that modified
the spack repository, but it doesn't do that anymore. There are other tests for
`changed_files()` that do a better job of mocking up a git repository with
changes, so we can just delete this one.
A GitHub rebase merge seems to rewrite commits even if it would be a
fast-forward, which means that the commit merged from #24718 is wrong.
- [x] update `.git-blame-ignore-revs` with real commit from `develop`
`spack style` tests were annoyingly brittle because we could not easily be
specific about which tools to run (we had to use `--no-black`, `--no-isort`,
`--no-flake8`, and `--no-mypy`). We should be able to specify what to run OR
what to skip.
Now you can run, e.g.:
spack style --tool black,flake8
or:
spack style --skip black,isort
- [x] Remove `--no-black`, `--no-isort`, `--no-flake8`, and `--no-mypy` args.
- [x] Add `--tool TOOL` argument.
- [x] Add `--skip TOOL` argument.
- [x] Allow either `--tool black --tool flake8` or `--tool black,flake8` syntax.
- [x] remove alignment spaces from tempaltes
- [x] replace single with double quotes
- [x] Makefile template now generates parsable code
(function body is `pass` instead of just a comment)
- [x] template checks now run black to check output
Previously we'd accept any version for bootstrapping black, but we need <= 21.
- [x] modify bootstrapping code to check black version before accepting an
executable from `PATH`.
- [x] add `.git-blame-ignore-revs` to ignore black reformatting
- [x] make `spack blame` respect `.git-blame-ignore-revs`
(even if the user hasn't configured git to do so)
Some of our tests rely on single vs. double quotes, and others rely on specific
line numbers in the source. These needed fixing after the switch to Black.
Black will automatically fix a lot of the exceptions we previously allowed for
directives, so we don't need them in our custom `flake8_formatter` anymore.
- [x] remove `E501` (long line) exceptions for directives from `flake8_formatter`,
as they won't help us now.
- [x] Refine exceptions for long URLs in the `flake8_formatter`.
- [x] Adjust the mock `flake8-package` to exhibit the exceptions we still allow.
- [x] Update style tests for new `flake8-package`.
- [x] Blacken style test.
Many noqa's in the code are no longer necessary now that the column limit is 99
characters. Others can easily be eliminated, and still more can just be made more
specific if they do not have to do with line length.
The only E501's still in the code are in the tests for `spack.util.path` and the tests
for `spack style`.
This adds necessary configuration for flake8 and black to work together.
This also sets the line length to 99, per the data here:
* https://github.com/spack/spack/pull/24718#issuecomment-876933636
Given the data and the spirit of black's 88-character limit, we set the limit to 99
characters for all of Spack, because:
* 99 is one less than 100, a nice round number, and all lines will fit in a
100-character wide terminal (even when the text editor puts a \ at EOL).
* 99 is just past the knee the file size curve for packages, and it means that packages
remain readable and not significantly longer than they are now.
* It doesn't seem to hurt core -- files in core might change length by a few percent but
seem like they'll be mostly the same as before -- just a bit more roomy.
- [x] set line length to 99
- [x] remove most exceptions from `.flake8` and add the ones black cares about
- [x] add `[tool.black]` to `pyproject.toml`
- [x] make `black` run if available in `spack style --fix`
Co-Authored-By: Tom Scogland <tscogland@llnl.gov>
* Add checksum for numba 0.55.2 and 0.56
* Add checksum for py-llvmlite 0.39.0
* Apply suggestions from code review
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* OpenGL: Restructures the OpenGL packages
This provides concrete glx and osmesa packages which delegate to
virtual libglx and libosmesa packages provided by mesa. This was
necessary because GLX and OSMesa both provide gl implementations but
with mesa providing the girtual gl package there was no way to properly
distinguish which of the two opengl implementations was beiing requested
when querying the spec['gl'] dependency. This additional level of
indirection allows for that.
* OpenGL: Adjust downstream dependents of OpenGL for the restructure
This implements the necessary fixes in the packages that depend on
OpenGL to work with the restructuring. This also attempts to create a
consistent variant for specifying glx or osmesa.
the patch urls dynamically generate a diff, which includes metadata
about the git version used, meaning they are not content-addressable.
instead ship the patches with spack.
In #31618 the idea was to determine the file extension heuristically by dropping query params etc from a url and then consider it as a file path. That broke for URLs that only have query params like http://example.com/?patch=x as it would result in empty string as basename. This PR reverts to the old behavior of saving files as ?patch=x in that case.
Co-authored-by: Stephen Sachs <stesachs@amazon.com>
* herwig3: change lhapdfsets dependency type to build
These data sets are needed for a check during build, but due to the difficulty of versioning the datasets it is preferred not to keep the them in the run environment.
* herwig3: explicitly state needed boost libs
* thepeg: explicitly state needed boost libs
* style
* stylestyle
* Tau must get GCC path from environment on Cray
self.compiler doesn't provide the path to the gcc compiler when using cray cc and the spack internal compiler overrides the location in PATH. If possible get the location from the GCC_PATH variable instead.
* Fix flake8 issues
* Update package.py
* llvm: Use variant when clauses for many of the expressed conflicts
* llvm: Remove the shared variant as it wasn't really used
* llvm: Remove unnecessary deps and make explicit the ones that are
* llvm: Cleanup patch conditions
* pocl: Update for llvm cleanup
* unit-test: update unparse package hash with the updated llvm package
* llvm: Fix ppc long double patching and add clarifying comments
`self.archive_file` is (among others) a symlink to a tarball. `extension()` on a
symlink will result in no extension. This patch fixes the behavior introduced in
https://github.com/spack/spack/pull/31618.
Co-authored-by: Stephen Sachs <stesachs@amazon.com>
When
1. Spack installs libtool,
2. system libtool is installed too, and
3. system automake is used
Spack passes system automake's `-I <prefix>` flag to itself, even though
it's a default search path. This takes precedence over spack's libtool
prefix dir. This causes the wrong `libtool.m4` file to be used (since
system libtool is in the same prefix as system automake).
And that leads to error messages about incompatible libtool, something
something LT_INIT.
fixes#31627
spack.mirror.get_all_versions now uses the package class
instead of the package object in its implementation.
Ensure spec is concrete before staging for mirrors
* Update open-ce patches for py-torch to us immutable URLs. Update magma dependency specs to be more explicit.
* Address comments for PR regarding URLs and conflicting variants.
Co-authored-by: Nicholas Cameron Sly <sly1@llnl.gov>
* rocblas: make tensile dependencies conditional
* Remove rocm-smi from the rocblas dependency list
rocm-smi was added to the rocblas dependency list because Tensile was a
dependency of rocBLAS and rocm-smi was a dependency of Tensile. However,
that reasoning was not correct.
Tensile is composed of three components:
1. A command-line tool for generating kernels, benchmarking them, and
saving the parameters used for generating the best kernels
(a.k.a. "Solutions") in YAML files.
2. A build system component that reads YAML solution files, generates
kernel source files, and invokes the compiler to compile then into
code object files (*.co, *.hsco). An index of the kernels and their
associated parameters is also generated and stored in either YAML
or MessagePack format (TensileLibrary.yaml or TensileLibrary.dat).
3. A runtime library that will load the TensileLibrary and code object
files when asked to execute a GEMM and choose the ideal kernel for
your specific input parameters.
rocBLAS developers use (1) during rocBLAS development. This is when
Tensile depends on rocm-smi. The GPU clock speed and temperature must be
controlled to ensure consistency when doing the solution benchmarking.
That control is provided by rocm-smi. When building rocBLAS, Tensile is
used for (2). However, there is no need for control of the GPU at that
point and rocm-smi is not a dependency. At runtime, the rocBLAS library
uses Tensile for (3), but there is again no dependency on rocm-smi.
tl;dr: rocm-smi is a dependency of the tensile benchmarking tool,
which is not a build dependency or runtime dependency of rocblas.
This PR contains several fixes for the kallisto package.
- create hdf5 variant as hdf5 is optional beginning with 0.46.2
- provide patch for 0.43 to link against libz
- provide patch for older versions to build again gcc-11 and up
- patch and code to use autoconf-2.70 and up
Newer versions of botocore (>=1.23.47) support the full IOBase
interface, so the hacks added to supplement the missing attributes are
no longer needed. Conditionally disable the hacks if they appear to be
unnecessary based on the class hierarchy found at runtime.
* py-panaroo: new package
* moving panaroo to branch
* updated mizani, plotnine, and pystan versions and requirements
* made suggested fixes
* adding more requested fixes
* added new versions of statsmodels and httpstan
* py-torch: add version 0.23.0 and fix to built on aarch64
* Add newer versions, fix build issues
* Fix tests
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Add connection information to buildcache update command
Ensure that the s3 connection made when attempting to update the content
of a buildcache attempts to use the extra connection information
from the mirror creation.
* Add unique help for endpoint URL argument
Fix copy/paste error for endpoint URL help which was the same as
the access token
* Re-work URL checking for S3 mirrors
Due to the fact that nested bucket URLs would never match the string used
for checking that the mirror is the same, switch the check used.
Sort all mirror URLs by length to have the most specific cases first
and see if the desired URL "starts with" the mirror URL.
* Long line style fixes
Add execptions for long lines and fix other style errors
* Use format() function to rebuild URL
Use the format command to rebuild the url instead of crafing a
formatted string out of known values
* Add early exit for URL checking
When a valid mirror is found, break from the loop
For a long time the module configuration has had a few settings that use
`blacklist`/`whitelist` terminology. We've been asked by some of our users to replace
this with more inclusive language. In addition to being non-inclusive, `blacklist` and
`whitelist` are inconsistent with the rest of Spack, which uses `include` and `exclude`
for the same concepts.
- [x] Deprecate `blacklist`, `whitelist`, `blacklist_implicits` and `environment_blacklist`
in favor of `exclude`, `include`, `exclude_implicits` and `exclude_env_vars` in module
configuration, to be removed in Spack v0.20.
- [x] Print deprecation warnings if any of the deprecated names are in module config.
- [x] Update tests to test old and new names.
- [x] Update docs.
- [x] Update `spack config update` to fix this automatically, and include a note in the error
that you can use this command.
Python's built-in tarfile support doesn't address some general
cases of malformed tarfiles that are already handled by the system
'tar' utility; until these can be addressed, use that exclusively.
Add support for CMake builds while preserving autotools support
for older versions of GDAL
* Add GDAL 3.5.0
* Remove GDAL 1
* Add support for new CMake build system
* Change defaults to build all recommended dependencies
* Simplify Autotools flag handling
* Determine version range for drivers
The goal of this PR is to make clearer where we need a package object in Spack as opposed to a package class.
We currently instantiate a lot of package objects when we could make do with a class. We should use the class
when we only need metadata, and we should only instantiate and us an instance of `PackageBase` at build time.
Modifications:
- [x] Remove the `spack.repo.get` convenience function (which was used in many places, and not really needed)
- [x] Use `spack.repo.path.get_pkg_class` wherever possible
- [x] Try to route most of the need for `spack.repo.path.get` through `Spec.package`
- [x] Introduce a non-data descriptor, that can be used as a decorator, to have "class level properties"
- [x] Refactor unit tests that had to be modified to reduce code duplication
- [x] `Spec.package` and `Repo.get` now require a concrete spec as input
- [x] Remove `RepoPath.all_packages` and `Repo.all_packages`
* fixed the cgal recipe and added the latest release.
* Update var/spack/repos/builtin/packages/cgal/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* updated cgal recipe to new URL for tarballs
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
There's a race condition in `remove()` as the lockfile is removed after
releasing the lock, which is a problem when another process acquires a
write lock during deletion.
Also simplify life a bit in multiprocessing when a file is possibly
removed multiple times, which currently is an error on the second
deletion, so the proposed fix is to make remove(...) idempotent and not
error when deleting non-existing cache entries.
Don't tests for existence of lockfile, cause windows/linux behavior is different
Oversight in #31433, the non-phony `env` target was missing a file being
created for it, which can cause make to infinitely loop when including
multiple generated makefiles.
* Metall package: add dependency to GCC for build test
* Package Metall: add v.017
* Package Metall: update the package file
* Update var/spack/repos/builtin/packages/metall/package.py
Co-authored-by: Bernhard Kaindl <43588962+bernhardkaindl@users.noreply.github.com>
* Metall package: add v0.18 and v0.19
* Metall Package: add v0.20
* Metall package: add v0.21
Co-authored-by: Bernhard Kaindl <43588962+bernhardkaindl@users.noreply.github.com>
When no default editor is installed and no environment variable is set,
which_string would return None and this would be passed to os.execv
resulting in a TypeError. The message presented to the user would be:
Error: execv: path should be string, bytes or os.PathLike,
not NoneType
This change checks that which_string has returned successfully before
attempting to execute the result, resulting in a new error message:
Error: No text editor found! Please set the VISUAL and/or EDITOR
environment variable(s) to your preferred text editor.
It's not strictly necessary, but I've also changed try_exec to catch
all errors rather than just OSErrors. This would have provided slightly
more context for the original error message.
Use 8 byte reals only when `precision=double` is set
The pre-defined compilation targets do not follow the usual behavior of
Makefiles. Compiler flags are set as strings (not Makefile variables) and as
such are not able to be overridden by environment variables. This patch changes
the behavior to the expected behavior of a Makefile such that `fflags` etc have
the desired effect.
Co-authored-by: Stephen Sachs <stesachs@amazon.com>
* [py-ipyparallel] setuptools.config.StaticModule moved
... in py-setuptools@61
* [py-ipyparallel] setuptools fix only added to release 8.2.1
https://github.com/ipython/ipyparallel/pull/680
* [py-ipyparallel] Fix typo
Co-authored-by: Stephen Sachs <stesachs@amazon.com>
There were two choices: 1) remove '-p' from '-a' or 2) allow monkeypatching
the cleaning of the python cache since clean's test_function_calls isn't
supposed to be actually cleaning anything.
This commit supports the latter and adds a test case for `-p`.
* add recipe for improved-rdock
* style: fix format
* style: fix format again
* Fix location of the directory
* Fix copyright
* Fix according to the reviewer's comments.
* Revert "Fix according to the reviewer's comments."
This reverts commit 4877877daf.
* Fix according to the reviewer's comments.
* style: fix format
* Update var/spack/repos/builtin/packages/improved-rdock/package.py
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
Co-authored-by: Yuichi Otsuka <otsukay@riken.jp>
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
* guppy: new package
* adding different hashs/urls
* working now
* guppy: new package
* ont-guppy: new package
* ont-guppy: new package
* ont-guppy: fixed style
- rocprim is a header-only library; its amdgpu_target variant is only
meaningful for its client executables, not the library itself
- comgr and llvm-amdgpu are merely indirect dependencies (via hip)
* Initial implementation of Omnitrace package
* Fix flake8 errors
* Fix run environment when +python
* String normalization and fix for build env when +tau
* Tweak to style
Release branches and tags run protected pipelines, and we noticed
that those pipelines were generating all jobs in the stack, even
when the mirror contained all the built specs and an up to date
index. The problem was caused because the override mirror was
not present in spacks mirror configuration at the time when the
binary_distribution.update() method was called. This fixes that
by always adding the mirror override, if present, to the list of
configured mirrors.
* py-altair: new package
* Update var/spack/repos/builtin/packages/py-altair/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-altair/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-altair/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* py-altair: update
* Update var/spack/repos/builtin/packages/py-altair/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* boost: do not access the context-impl variant for versions below 1.65.0
* boost: check if spec.variants contains context-impl
* boost: improve error message when the context-impl variant causes a conflict
Executing spack solve boost@1.63.0 +context context-impl=fcontext
triggers the following error message:
==> Error: No version for 'boost' satisfies '@1.63.0' and '@1.79.0'
With this change, the error message becomes the following:
==> Error: Cannot set variant 'context-impl' for package 'boost' because the variant condition cannot be satisfied for the given spec
We adopted the convention of putting binaries for each stack into
a dedicated mirror named after the directory in which the stack
(spack.yaml file) resides. This fixes the mirror url of the
radiuss-aws-aarch64 stack to follow that convention.
`make_target` can be used to instruct Spack to build one of the pre-defined make
targets in the MPAS makefile. Spack will guess the targret based on the value of
`spack_fc`, but the user can overwrite the target as variant. E.g.
```
spack install mpas-model make_target=pgi-nersc
```
`precision` is used to set the `PRECISION` flag in the Makefile to {single,
double}. Default is double.
Co-authored-by: Stephen Sachs <stesachs@amazon.com>
* remove unhelpful comment
* Filter compiler duplicates while reading manifest
* more-specific version matching edited to use module-specific version (to avoid an issue where a user might add a compiler with the same version to the initial test configuration
* Set R_LIBS_USER='' in dependent build environment
Despite R packages being installed with the --vanilla flag, which
ignores Rprofile and Renviron files, R will still set R_LIBS_USER if the
default directory exists. This could lead to pulling in packages from
that directory during the build which could cause the build to fail. To
avoid that, explicitly set R_LIB_USER='' to ensure that packages from
the HOME/R directory are not in the library path.
* Update var/spack/repos/builtin/packages/r/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* PythonPackage: add default libs/headers attributes
* Style fix
* libs and headers should be properties
* Check both platlib and include
* Fix variable reference
Building on #24639, this allows versions to be prefixed by `git.`. If a version begins `git.`, it is treated as a git ref, and handled as git commits are starting in the referenced PR.
An exception is made for versions that are `git.develop`, `git.main`, `git.master`, `git.head`, or `git.trunk`. Those are assumed to be greater than all other versions, as those prefixed strings are in other contexts.
This commit adds some changes which improve use of Spack-installed
oneAPI packages with Spack-generated modules, but not within Spack
(e.g. if you install some of these packages with Spack, then load
their associated modules to build other packages outside of Spack).
The majority of the PR diff is refactoring. The functional changes
are:
* intel-oneapi-mkl:
* setup_run_environment: update Intel compiler flags to RPATH the
mkl libs
* intel-oneapi-compilers: update the compiler configuration to RPATH
libraries installed by this package (note that Spack already handled
this when installing dependent packages with Spack, but this is
specifically to use the intel-oneapi-compilers package outside
of Spack). Specifically:
* inject_rpaths: this modifies the binaries installed as part of
the intel-oneapi-compilers package to RPATH libraries provided
by this package
* extend_config_flags: this instructs the compiler executables
provided by this package to RPATH those same libraries
Refactoring includes:
* intel-oneapi-compilers: in addition to the functional changes,
a large portion of this diff is reorganizing the creation of
resources/archives downloaded for the install
* The base oneAPI package renamed component_path, so several packages
changed as a result:
* intel-oneapi-dpl
* intel-oneapi-dnn
* extrae
* intel-oneapi-mpi:
* Perform file filtering in one pass rather than two
Allow `spack external find` (with no extra args) to proceed if the manifest file exists but
without sufficient permissions; in that case, print a warning. Also add a test for that behavior.
TODOs:
- [x] continue past any exception raised during manifest parsing as part of `spack external find`,
except for CTRL-C (and other errors that indicate immediate program termination)
- [x] Semi-unrelated but came up when discussing this with the user who reported this issue to
me: the manifest parser now accepts older schemas
See: https://github.com/spack/spack/issues/31191
nvc doesn't know this flag: `-Wno-unknown-pragmas`, it doesn't hurt to
remove the specific warning flags, from:
```
-O3 -Wall -Wextra -Wno-unknown-pragmas -Wcast-qual
```
to:
```
-O3 -Wall
```
fixes#30997
Instead of giving a penalty of 30 to all nodes when preferences
are not package specific, give a penalty of 100 to all targets
of a node where we have package specific preferences, if the target
is not explicitly preferred.
* Add the rocm tag to packages from the Radeon Open Compute Platform.
* Added more packages from the ROCm software distribution based on
reviewer feedback.
* Updated tags based on reviewer feedback
* add first version of py-pyrr package
* added license
* update license HEADER
* Remove preferred as there is only one version available
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Better specify dependency type
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* remove useless variable license
Co-authored-by: Jérôme Dubois <jerome.dubois@cea.fr>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Fixed a bug in the 'external find --all' command where the call failed
to find packages by both executable and library. The bug was that the
call `path.all_packages()` incorrectly turned the variable
`packages_to_check` into a generator rather than keeping it a list.
Thus the second call to `detection.by_library` had no work to do.
* Fixed the help message for the find external and compiler commands as
well as others that used the `scopes_metavar` field to define where
the results should be stored in configuration space. Specifically,
the fact that configuration could be added to the environment was not
mentioned in the help message.
os.path.dirname was being used to compare compilers. If two compilers
are in the same directory then it will pick up the first one it encounters.
Compare the full compiler path instead.
When installing setuptools from sources in Spack, we might
get into weird failures due to the way we use pip.
In particular, for Spack it's necessary to install in a
non-isolated pip environment to allow using PYTHONPATH as a
selection method for all the build requirements of a
Python package.
This can fail when installing setuptools since there might
be a setuptools version already installed for the Python
interpreter being used, with different entry points than
the one we want to install.
Installing from wheels both pip and setuptools should
harden our installation procedure in the context of:
- Bootstrapping Python dependencies of Spack
- Using external Python packages
On Cray systems that use Cray Data Virtualization Service (DVS),
symlinks across filesystems are not allowed, either due to a bug, or
because they're simply not POSIX compliant [1].
Spack's OpenSSL package defaults to `certs=system` which comes down to
symlinking `/etc/ssl` in the Spack install prefix, triggering this
problem, resulting in mysterious installation failures.
Instead of relying on system certs, we can just use
`ca-certificates-mozilla`, and if users really need system certs, then
they're probably better off marking OpenSSL entirely as external.
[1] https://github.com/glennklockwood/cray-dvs
* Created package and added description
* Add py-markdown-include
* Created package
* Finished creating package
* Added py-md-environ
* Added build dependencies
* Added other deps
* Add python-markdown-math (#4)
* Created package and started to add info
* Removed unneeded global/install options
* Figured out version spec for markdown-math
* Removed type=build from unnecessary dependencies
* Removed unneeded install/global options, added version spec to dependency
* Added wscullin as interim maintainer for packages
* Fixed style issues
* Took care of trailing whitespace
* Removed comment line before imports
* Changed file charset to match other packages
* Update var/spack/repos/builtin/packages/py-ford/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-ford/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Removed test dependency after review feedback
* Added new 6.1.12 version to py-ford
Co-authored-by: Seth R. Johnson <johnsonsr@ornl.gov>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Add LevelZero variant to hwloc package
This permits the hwloc package to build with with support for the
Intel Level Zero low-level layer, analogous to CUDA, ROCm, and OpenCL.
* Fix typo
Add variant +gssapi to enable authentication via Kerberos through GSSAPI
When openssh is installed at sites using Kerberos, openssh needs to auth
via Kerberos through GSSAPI in order to work in such environments.
* Update h5bench maintainers and versions
* Include version 1.1 for h5bench
* Correct release hash and set default version
* Update .tar.gz version
* Update HDF5 VOL async version and environment variable syntax
* added package gptune with all its dependencies: adding py-autotune, pygmo, py-pyaml, py-autotune, py-gpy, py-lhsmdu, py-hpbandster, pagmo2, py-opentuner; modifying superlu-dist, py-scikit-optimize
* adding gptune package
* minor fix for macos spack test
* update patch for py-scikit-optimize; update test files for gptune
* fixing gptune package style error
* fixing unit tests
* a few changes reviewed in the PR
* improved gptune package.py with a few newly added/improved dependencies
* fixed a few style errors
* minor fix on package name py-pyro4
* fixing more style errors
* Update var/spack/repos/builtin/packages/py-scikit-optimize/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* resolved a few issues in the PR
* fixing file permissions
* a few minor changes
* style correction
* minor correction to jq package file
* Update var/spack/repos/builtin/packages/py-pyro4/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* fixing a few issues in the PR
* adding py-selectors34 required by py-pyro4
* improved the superlu-dist package
* improved the superlu-dist package
* moree changes to gptune and py-selectors34 based on the PR
* Update var/spack/repos/builtin/packages/py-selectors34/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* improved gptune package: 1. addressing comments of tldahlgren in PR 26936; 2. adding variant openmpi
* fixing style issue of gptune
* changing file mode
* improved gptune package: add variant mpispawn which depends on openmpi; add variant superlu and hypre for installing the drivers; modified hypre package file to add a gptune variant
* fixing style error
* corrected pddrive_spawn path in gptune test; enforcing gcc>7
* fixing style error
* setting environment variables when loading gptune
* removing debug print in hypre/package.py
* adding superlu-dist v7.2.0; fixing an issue with CMAKE_INSTALL_LIBDIR
* changing site_packages_dir to python_platlib
* not using python3.9 for py-gpy, which causes due to dropped support of tp_print
* more replacement of site_packages_dir
* fixing a few dependencies in gptune; added a gptune version
* adding url for gptune
* minor correction of gptune
* updating versions in butterflypack
* added a version for openturns
* added a url for openturns
* minor fix for openturns
* Update var/spack/repos/builtin/packages/openturns/package.py
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
* added version2.1.1 for butterflypack
* fixing a tag in butterflypack
* minor fix for superlu-dist
* removed file filter for superlu-dist
* Update var/spack/repos/builtin/packages/superlu-dist/package.py
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
* superlu-dist: add version detection for the testing; removing unused lines
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
* add test to verify fix works
* fix spec cflags/variants parsing test (breaking change)
* fix `spack spec` arg quoting issue
* add error report for deprecated cflags coalescing
* use .group(n) vs subscript regex group extraction for 3.5 compat
* add random test for untested functionality to pass codecov
* fix new test failure since rebase
Fix a bug introduced in #21720. `spack_json.dump()` calls `_strify()` on dictionaries to
convert `unicode` to `str`, but it constructs `dict` objects instead of
`collections.OrderedDict` objects, so in Python 2 (or earlier versions of 3) it can
scramble dictionary order.
This can cause hashes to differ between Python 2 and Python 3, or between Python 3.7
and earlier Python 3's.
- [x] use `OrderedDict` in `_strify`
- [x] add a regression test
* nfft, pnfft: fix detection of fftw variants (precision)
* nfft, pnfft: use fftw's selected_precisions; avoid repetitive calls to spec
Co-authored-by: Martin Lang <martin.lang@mpsd.mpg.de>
The "submodules" argument of the "version" directive can now accept
a callable that returns a list of submodules, in addition to the usual
Boolean values
* Cancel running workflows automatically on PR update
* Add the last update later to check cancellation is working
* Use github.run_number instead of github.sha
* [py-sentry-sdk] audited dependencies and relisted extras as variants
* [py-sentry-sdk] added version 1.5.5
* [py-sentry-sdk] flake8
* [py-sentry-sdk]
- added "descriptions" to variants
- removed conflicts
- replaced with when statements in varients
* bootstrap: account for disabled sources
Fix a bug introduced in #30192, which effectively skips
any prescription on disabled bootstrapping sources.
* Add unit test to avoid regression
Fixes#31021
With #25185, we no longer default to using tar when we can't
determine the extension type, opting to fail instead.
This broke fetching for the pcre package, where we couldn't determine
the extension. To determine the extension, we were attempting to
extract it from the destination filename; however, this file name
may omit details of the origin URL that are required to determine the
extension, so instead we examine the URL directly.
This also updates the decompressor_for method not to set ext=None
by default: it must now always be set by the caller.
* Update prmon recipe, v3.0.2
Update recipe to v3.0.2, using external dependency
option for the build (as these are satisfied so easily with Spack)
* Remove "broken" 3.0.1 version
This one could not build properly with Spack, due to
missing submodule sources
Installation process of libint runs a Python script:
<69cc7b9bc6/export/cmake/CMakeLists.txt.export (L410)>.
If Python isn't explicitly listed as build dependency, system Python will be
picked up, which can cause troubles.
* Fix py-ray dependencies and build system
* Update var/spack/repos/builtin/packages/py-ray/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Added documentation for unusual dependencies.
* Fixed npm preinstall script per @adamjstewart suggestion.
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Most package installations include compressed source files. This
adds support for common archive types on Windows:
* Add support for using system 7zip functionality to decompress .Z
files when available (and on Windows, use 7zip for .xz archives)
* Default to using built-in Python support for tar/bz2 decompression
(note that Python tar documentation mentions preservation of file
permissions)
* Add tests for decompression support
* Extract logic for handling exploding archives (i.e. compressed
archives that expand to more than one base file) into an
exploding_archive_catch context manager in the filesystem module
* [py-httpx] python dependencies are type=('build', 'run')
* [py-httpx] py-wheel is now implied by PythonPackage
* [py-httpx] fixed older version dependencies
* [py-httpx] added version 0.22.0
Spack's staging logic constructs a file path based on a URL. The URL
may contain characters which are not allowed in valid file paths on
the system (e.g. Windows prohibits ':' and '?' among others). This
commit adds a function to remove such offending characters (but
otherwise preserves the URL string when constructing a file path).
* add pacakge: abacus
* rename
* fix some style bugs
* update package:abacus
* fix some style bugs
* format code
* Delete a line of useless comments
* updatee abacus
* Update package.py
add new version info and fix a bug on mkl
* update version info and fix a bug on mkl
* Update package.py
* fix style bugs
* trailing whitespace
Anticipate openPMD-api changes in the next major release that are
already in `dev` (aka Spack `develop`):
- C++17 requirement
- drop: `mpark-variant` public dependency
- add: `toml11` private dependency
Also add @franzpoeschel as co-maintainer for the Spack package.
Updates to improve Spack-generated modules for Intel oneAPI compilers:
* intel-oneapi-compilers set CC etc.
* Add a new package intel-oneapi-compilers-classic which can be used to
generate a module which sets CC etc. to older compilers (e.g. icc)
* lmod module logic now updated to treat the intel-oneapi-compilers*
packages as compilers
* acts-dd4hep: new package, separated from new acts@19.1.0
* acts-dd4hep: improved versioning
* acts-dd4hep: don't use curl | sha256sum
* acts: new variant `odd` for Open Data Detector
* acts-dd4hep: style changes
Add spack stacks targeted at Spack + AWS + ARM HPC User Group hackathon. Includes
a list of miniapps and full-apps that are ready to run on both x86_64 and aarch64.
Co-authored-by: Scott Wittenburg <scott.wittenburg@kitware.com>
Add two new stacks targeted at x86_64 and arm, representing an initial list of packages
used by current and planned AWS Workshops, and built in conjunction with the ISC22
announcement of the spack public binary cache.
Co-authored-by: Scott Wittenburg <scott.wittenburg@kitware.com>
Explicitly import package utilities in all packages, and corresponding fallout.
This includes:
* rename `spack.package` to `spack.package_base`
* rename `spack.pkgkit` to `spack.package`
* update all packages in builtin, builtin_mock and tutorials to include `from spack.package import *`
* update spack style
* ensure packages include the import
* automatically add the new import and remove any/all imports of `spack` and `spack.pkgkit`
from packages when using `--fix`
* add support for type-checking packages with mypy when SPACK_MYPY_CHECK_PACKAGES
is set in the environment
* fix all type checking errors in packages in spack upstream
* update spack create to include the new imports
* update spack repo to inject the new import, injection persists to allow for a deprecation period
Original message below:
As requested @adamjstewart, update all packages to use pkgkit. I ended up using isort to do this,
so repro is easy:
```console
$ isort -a 'from spack.pkgkit import *' --rm 'spack' ./var/spack/repos/builtin/packages/*/package.py
$ spack style --fix
```
There were several line spacing fixups caused either by space manipulation in isort or by packages
that haven't been touched since we added requirements, but there are no functional changes in here.
* [x] add config to isort to make sure this is maintained going forward
referred targets are currently the only minimization criteria for Spack for which we allow
negative values. That means Spack may be incentivized to add nodes to the DAG if they
match the preferred target.
This PR re-norms the minimization criteria so that preferred targets are weighted from 0,
and default target weights are offset by the number of preferred targets per-package to
calculate node_target_weight.
Also fixes a bug in the test for preferred targets that was making the test easier to pass
than it should be.
* Call Numpy package's set_blas_lapack() and setup_build_environment() in Scipy package
* Remove broken link from comment
* Use .package attribute of spec to avoid import
This PR fixes several issues I noticed while trying to get Spack working on Apple M1.
- [x] `build_environment.py` attempts to add `spec['foo'].libs` and `spec['foo'].headers` to our compiler wrappers for all dependencies using a try-except that ignores `NoLibrariesError` and `NoHeadersError` respectively. However, The `libs` and `headers` attributes of the Python package were erroneously using `RuntimeError` instead.
- [x] `spack external find python` (used during bootstrapping) currently has no way to determine whether or not an installation is `+shared`, so previously we would only search for static Python libs. However, most distributions including XCode/Conda/Intel ship shared Python libs. I updated `libs` to search for both shared and static (order based on variant) as a fallback.
- [x] The `headers` attribute was recursively searching in `prefix.include` for `pyconfig.h`, but this could lead to non-deterministic behavior if multiple versions of Python are installed and `pyconfig.h` files exist in multiple `<prefix>/include/pythonX.Y` locations. It's safer to search in `sysconfig.get_path('include')` instead.
- [x] The Python installation that comes with XCode is broken, and `sysconfig.get_paths` is hard-coded to return specific directories. This meant that our logic for `platlib`/`purelib`/`include` where we replace `platbase`/`base`/`installed_base` with `prefix` wasn't working and the `mkdirp` in `setup_dependent_package` was trying to create a directory in root, giving permissions issues. Even if you commented out those `mkdirp` calls, Spack would add the wrong directories to `PYTHONPATH`. Added a fallback hard-coded to `lib/pythonX.Y/site-packages` if sysconfig is broken (this is what distutils always did).
This PR supports the creation of securely signed binaries built from spack
develop as well as release branches and tags. Specifically:
- remove internal pr mirror url generation logic in favor of buildcache destination
on command line
- with a single mirror url specified in the spack.yaml, this makes it clearer where
binaries from various pipelines are pushed
- designate some tags as reserved: ['public', 'protected', 'notary']
- these tags are stripped from all jobs by default and provisioned internally
based on pipeline type
- update gitlab ci yaml to include pipelines on more protected branches than just
develop (so include releases and tags)
- binaries from all protected pipelines are pushed into mirrors including the
branch name so releases, tags, and develop binaries are kept separate
- update rebuild jobs running on protected pipelines to run on special runners
provisioned with an intermediate signing key
- protected rebuild jobs no longer use "SPACK_SIGNING_KEY" env var to
obtain signing key (in fact, final signing key is nowhere available to rebuild jobs)
- these intermediate signatures are verified at the end of each pipeline by a new
signing job to ensure binaries were produced by a protected pipeline
- optionallly schedule a signing/notary job at the end of the pipeline to sign all
packges in the mirror
- add signing-job-attributes to gitlab-ci section of spack environment to allow
configuration
- signing job runs on special runner (separate from protected rebuild runners)
provisioned with public intermediate key and secret signing key
Old concrete specs were slipping through in `_assign_hash`, and `package_hash` was
attempting to recompute a package hash when we could not know the package a time
of concretization.
Part of this was that the logic for `_assign_hash` was hard to understand -- it was
called twice from `_finalize_concretization` and had special cases for both args it
was called with. It's much easier to understand the logic here if we just inline it.
- [x] Get rid of `_assign_hash` and just integrate it with `_finalize_concretization`
- [x] Don't call `_package_hash` at all for already-concrete specs.
- [x] Add regression test.
Use `spack build` as build dir to avoid recursive link error.
```
config.status: linking /var/folders/fy/x2xtwh1n7fn0_0q2kk29xkv9vvmbqb/T/s3j/spack-stage/spack-stage-sed-4.8-wraqsot6ofzvr3vrgusx4mj4mya5xfux/spack-src/GNUmakefile to GNUmakefile
config.status: executing depfiles commands
config.status: executing po-directories commands
config.status: creating po/POTFILES
config.status: creating po/Makefile
==> sed: Executing phase: 'build'
==> [2022-05-25-14:15:51.310333] 'make' '-j8' 'V=1'
make: GNUmakefile: Too many levels of symbolic links
make: stat: GNUmakefile: Too many levels of symbolic links
make: *** No rule to make target `GNUmakefile'. Stop.
```
This PR introduces a new build cache layout and package format, with improvements for
both efficiency and security.
## Old Format
Currently a binary package consists of a `spec.json` file at the root and a `.spack` file,
which is a `tar` archive containing a copy of the `spec.json` format, possibly a detached
signature (`.asc`) file, and a tar-gzip compressed archive containing the install tree.
```
build_cache/
# metadata (for indexing)
<arch>-<compiler>-<name>-<ver>-24zvipcqgg2wyjpvdq2ajy5jnm564hen.spec.json
<arch>/
<compiler>/
<name>-<ver>/
# tar archive
<arch>-<compiler>-<name>-<ver>-24zvipcqgg2wyjpvdq2ajy5jnm564hen.spack
# tar archive contents:
# metadata (contains sha256 of internal .tar.gz)
<arch>-<compiler>-<name>-<ver>-24zvipcqgg2wyjpvdq2ajy5jnm564hen.spec.json
# signature
<arch>-<compiler>-<name>-<ver>-24zvipcqgg2wyjpvdq2ajy5jnm564hen.spec.json.asc
# tar.gz-compressed prefix
<arch>-<compiler>-<name>-<ver>-24zvipcqgg2wyjpvdq2ajy5jnm564hen.tar.gz
```
After this change, the nesting has been removed so that the `.spack` file is the
compressed archive of the install tree. Now signed binary packages, will take the
form of a clearsigned `spec.json` file (a `spec.json.sig`) at the root, while unsigned
binary packages will contain a `spec.json` at the root.
## New Format
```
build_cache/
# metadata (for indexing, contains sha256 of .spack file)
<arch>-<compiler>-<name>-<ver>-24zvipcqgg2wyjpvdq2ajy5jnm564hen.spec.json
# clearsigned spec.json metadata
<arch>-<compiler>-<name>-<ver>-24zvipcqgg2wyjpvdq2ajy5jnm564hen.spec.json.sig
<arch>/
<compiler>/
<name>-<ver>/
# tar.gz-compressed prefix (may support more compression formats later)
<arch>-<compiler>-<name>-<ver>-24zvipcqgg2wyjpvdq2ajy5jnm564hen.spack
```
## Benefits
The major benefit of this change is that the signatures on binary packages can be
verified without:
1. Having to download the tarball, or
2. having to extract an unknown tarball.
(1) is an improvement in efficiency; (2) is a security fix: we now ensure that we trust the
binary before we try to run it through `tar`, which avoids potential attacks.
## Backward compatibility
Also after this change, spack should still be able to handle the previous buildcache
structure and binary mirrors with mixed layouts.
This PR builds on #28392 by adding a convenience command to create a local mirror that can be used to bootstrap Spack. This is to overcome the inconvenience in setting up this mirror manually, which has been reported when trying to setup Spack on air-gapped systems.
Using this PR the user can create a bootstrapping mirror, on a machine with internet access, by:
% spack bootstrap mirror --binary-packages /opt/bootstrap
==> Adding "clingo-bootstrap@spack+python %apple-clang target=x86_64" and dependencies to the mirror at /opt/bootstrap/local-mirror
==> Adding "gnupg@2.3: %apple-clang target=x86_64" and dependencies to the mirror at /opt/bootstrap/local-mirror
==> Adding "patchelf@0.13.1:0.13.99 %apple-clang target=x86_64" and dependencies to the mirror at /opt/bootstrap/local-mirror
==> Adding binary packages from "https://github.com/alalazo/spack-bootstrap-mirrors/releases/download/v0.1-rc.2/bootstrap-buildcache.tar.gz" to the mirror at /opt/bootstrap/local-mirror
To register the mirror on the platform where it's supposed to be used run the following command(s):
% spack bootstrap add --trust local-sources /opt/bootstrap/metadata/sources
% spack bootstrap add --trust local-binaries /opt/bootstrap/metadata/binaries
The mirror has to be moved over to the air-gapped system, and registered using the commands shown at prompt. The command has options to:
1. Add pre-built binaries downloaded from Github (default is not to add them)
2. Add development dependencies for Spack (currently the Python packages needed to use spack style)
* bootstrap: refactor bootstrap.yaml to move sources metadata out
* bootstrap: allow adding/removing custom bootstrapping sources
This operation can be performed from the command line since
new subcommands have been added to `spack bootstrap`
* Add --trust argument to spack bootstrap add
* Add a command to generate a local mirror for bootstrapping
* Add a unit test for mirror creation
* Allow Kokkos with OpenMPTarget backend
* Restrict SYCL and OpenMPTarget to C++17 or higher
* Improve C++ standard check for SYCL and OpenMPTarget
* Fix indentation
Currently, environments can either be concretized fully together or fully separately. This works well for users who create environments for interoperable software and can use `concretizer:unify:true`. It does not allow environments with conflicting software to be concretized for maximal interoperability.
The primary use-case for this is facilities providing system software. Facilities provide multiple MPI implementations, but all software built against a given MPI ought to be interoperable.
This PR adds a concretization option `concretizer:unify:when_possible`. When this option is used, Spack will concretize specs in the environment separately, but will optimize for minimal differences in overlapping packages.
* Add a level of indirection to root specs
This commit introduce the "literal" atom, which comes with
a few different "arities". The unary "literal" contains an
integer that id the ID of a spec literal. Other "literals"
contain information on the requests made by literal ID. For
instance zlib@1.2.11 generates the following facts:
literal(0,"root","zlib").
literal(0,"node","zlib").
literal(0,"node_version_satisfies","zlib","1.2.11").
This should help with solving large environments "together
where possible" since later literals can be now solved
together in batches.
* Add a mechanism to relax the number of literals being solved
* Modify spack solve to display the new criteria
Since the new criteria is above all the build criteria,
we need to modify the way we display the output.
Originally done by Greg in #27964 and cherry-picked
to this branch by the co-author of the commit.
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
* Inject reusable specs into the solve
Instead of coupling the PyclingoDriver() object with
spack.config, inject the concrete specs that can be
reused.
A method level function takes care of reading from
the store and the buildcache.
* spack solve: show output of multi-rounds
* add tests for best-effort coconcretization
* Enforce having at least a literal being solved
Co-authored-by: Greg Becker <becker33@llnl.gov>
* Py-x21 now works, needs dependencies
Conflicts:
var/spack/repos/rit-rc/packages/py-x21/package.py
* Added dependencies to py-x21
* Making flake style check happy
* [py-x21] flake8
* [py-x21]
- added homepage
- added placeholder description
- added comment about checksums
* [py-x21] added darwin support and fixed issue with python 3.7 wheel name
* [py-x21] adding checksum hash
* [py-x21] removed duplicate py-pynacl
* [py-x21]
- updated description
- updated version listing to have a different version for each version
of python. Also, versions dependent on sys.platform
- updated url_for_version to not require post concretized information so
that spack checksum works
* [py-x21] isort
Co-authored-by: vehrc <vehrc@rit.edu>
Previously the regex was only checking for presence of quotes as a beginning
or end character and not a matching set. This erroneously identified the
following *single* argument as being quoted:
source bashenvfile &> /dev/null && python3 -c "import os, json; print(json.dumps(dict(os.environ)))"
rocm-5.1.0 removed librocrand.so from ROCM_DIR/rocrand/lib location (but includes are still at this location)
/opt/rocm-5.0.2/lib/librocrand.so
/opt/rocm-5.0.2/rocrand/lib/librocrand.so
/opt/rocm-5.1.0/lib/librocrand.so
drwxr-xr-x 2 root root 617 Mar 8 08:20 /opt/rocm-5.0.2/rocrand/include
drwxr-xr-x 2 root root 617 Mar 31 09:48 /opt/rocm-5.1.0/rocrand/include
Add a config option to strip `-Werror*` or `-Werror=*` from compile lines everywhere.
```yaml
config:
keep_werror: false
```
By default, we strip all `-Werror` arguments out of compile lines, to avoid unwanted
failures when upgrading compilers. You can re-enable `-Werror` in your builds if
you really want to, with either:
```yaml
config:
keep_werror: all
```
or to keep *just* specific `-Werror=XXX` args:
```yaml
config:
keep_werror: specific
```
This should make swapping in newer versions of compilers much smoother when
maintainers have decided to enable `-Werror` by default.
Parse error information is kept for specs, but it doesn't seem like we propagate it
to the user when we encounter an error. This fixes that.
e.g., for this error in a package:
```python
depends_on("python@:3.8", when="0.900:")
```
Before, with no context and no clue that it's even from a particular spec:
```
==> Error: Unexpected token: ':'
```
With this PR:
```
==> Error: Unexpected token: ':'
Encountered when parsing spec:
0.900:
^
```
* Added autotools configure flags to ensure that hwloc finds the correct
version of CUDA that it was concretized against, rather than the first
one that package config finds.
* Added support for finding the correct version of ROCm libraries. Fixed Flake8.
* Fixed guard on finding ROCm library
* [py-h2] py-wheel is implied by PythonPackage
* [py-h2] python dependencies should be type=('build', 'run')
* [py-h2] fixed dependencies for py-h2@4.0.0
* [py-h2] added version 3.2.0
* [py-h2] added version 4.1.0
* [py-h2] Older version requires py-enum34 for older versions of python
Add two new cloud pipelines for E4S on Amazon Linux, include arm and x86 (v3 + v4) stacks.
Notes:
- Updated mpark-variant to remove conflict that no longer exists in Amazon Linux
- Which command on Amazon Linux prefixes on all results when padded_length is too high. In this case, padded_length<=503 works as expected. Chose conservative length of 384.
* Introduce concretizer:unify option to replace spack:concretization
* Deprecate concretization
* Make spack:concretization overrule concretize:unify for now
* Add environment update logic to move from spack:concretization to spack:concretizer:reuse
* Migrate spack:concretization to spack:concretize:unify in all locations
* For new environments make concretizer:unify explicit, so that defaults can be changed in 0.19
* Update h5bench maintainers and versions
* Include version 1.1 for h5bench
* Correct release hash and set default version
* Update .tar.gz version
* Include new version and update runtime
* Update year
* Update package.py
* Update package.py
fixes#30700
To avoid clingo adding penalties for not using the
default value for a variant, it's better to model
the variant as conditional where possible.
* This commit removes the Boost.with_default_variants to variants that packages are precisely dependant upon. This is the third batch of 16 packages with modified boost dependencies.
* style fix
* Update var/spack/repos/builtin/packages/sympol/package.py
Co-authored-by: Tim Haines <thaines.astro@gmail.com>
* fix style
* Apply suggestions from code review
Co-authored-by: Tim Haines <thaines.astro@gmail.com>
* Fix Trilinos boost deps
* Fix style
Co-authored-by: Tim Haines <thaines.astro@gmail.com>
Co-authored-by: Tom Scogland <tom.scogland@gmail.com>
Add a `build_type` variant, which allows building optimized compilers,
as well as target libraries (libstdc++ and friends).
The default is `build_type=RelWithDebInfo`, which corresponds to GCC's
default of -O2 -g.
When building with `+bootstrap %gcc`, also add Spack's arch specific
flags using the common denominator between host and new GCC.
It is done by creating a config/spack.mk file in def patch, that looks
as follows:
```
BOOT_CFLAGS := $(filter-out -O% -g%, $(BOOT_CFLAGS)) -O2 -g -march=znver2 -mtune=znver2
CFLAGS_FOR_TARGET := $(filter-out -O% -g%, $(CFLAGS_FOR_TARGET)) -O2 -g -march=znver2 -mtune=znver2
CXXFLAGS_FOR_TARGET := $(filter-out -O% -g%, $(CXXFLAGS_FOR_TARGET)) -O2 -g -march=znver2 -mtune=znver2
```
The oneapi and dpcpp compilers are essentially the same except for which
binary is used foc CXX. Spack will detect them as "mixed toolchain" and
not inject compiler optimization flags. This will be needed once
archspec has entries for the oneapi and dpcpp compilers. This PR detects
when dpcpp and oneapi are in the toolchains list and explicitly sets
`is_mixed_toolchain` to `False`.
* [py-openslide-python] added verion 1.1.2 and set max py-setuptools version for 1.1.1
* [py-openslide-python]
- setuptools required for all possible newer versions
- python is type build run
* [py-openslide-python] use pil provider
* Add version 3.0 and 3.1 and prelim OpenMP support
* Fix flag handler missing spec variable
* Use self.compiler.openmp_flag instead of -fopenmp
* Fix whitespace
Fixes qt configure errors with external openssl on older systems (rhel7)
See
efc02f9cc3/dist/changes-5.15.0 (L346)
This means for now on, `qt ^openssl@1.0` gets you `qt@5.15.4 ~ssl`:
clingo chooses latest qt version **but disables ssl support**.
Error messages for the clingo concretizer have proven challenging. The current messages are incredibly vague and often don't help users at all. Unsat cores in clingo are not guaranteed to be minimal, and lead to cores that are either not useful or need to be post-processed for hours to reach a minimal core.
Following up on an idea from a slack conversation with kwryankrattiger on slack, this PR takes a new approach. We eliminate most integrity constraints and minima/maxima on choice rules in clingo, and instead force invalid states to imply an error predicate. The error predicate can include context on the cause of the error (Package, Version, etc). These error predicates are then heavily optimized against, to ensure that we do not include error facts in the solution when a solution with no error facts could be generated. When post-processing the clingo solution to construct specs, any error facts cause the program to raise an exception. This leads to much more legible error messages. Each error predicate includes a priority and an error message. The error message is formatted by the remaining arguments to produce the error message. The priority is used to ensure that when clingo has a choice of which rules to violate, it chooses the one which will be most informative to the user.
Performance:
"fresh" concretizations appear to suffer a ~20% performance penalty under this branch, while "reuse" concretizations see a speedup of around 33%.
Possible optimizations if users still see unhelpful messages:
There are currently 3 levels of priority of the error messages. Additional priorities are possible, and can allow us finer granularity to ensure more informative error messages are provided in lieu of less informative ones.
Future work:
Improve tests to ensure that every possible rule implying an error message is exercised
A non-existent upstream should not be fatal: it could only mean it is
not deployed yet. In the meantime, it should not block the user to
rebuild anything it needs.
A warning is still emitted, to let the user decide if this is ok or not.
* Fix for xtensor-xsimd
* Add sha256 for all new releases
* renamed ufcx package
* Update sha for ffcx
* fixed hashes and modified fenics-dolfinx to depend on ufcx
* cleaned and fixed dependency types
* use spec.satisfies in cmake_args
* bumped to ufcx@0.4.1
* address PR comments
* fix hashes
* update parmetis in cmake_args to reflect default setting
* update versions
* renamed ufcx package
* fixed hashes and modified fenics-dolfinx to depend on ufcx
* cleaned and fixed dependency types
* use spec.satisfies in cmake_args
* bumped to ufcx@0.4.1
* address PR comments
* fix hashes
* update parmetis in cmake_args to reflect default setting
* update versions
* Add dependency fix
* bump basix to 0.4.2 and address PR comments
* Versioning fixes
* Use xtensor-0.24: and loosen pybind11
* Add conflicts for partitioners
* Updates on partitioners
* use define_from_variant
* Tidy up some dependencies
* Work on multi-variants for graph partitioners
* Fix KaHIP issue.
KaHIP changed the name of its library from 'interface' to 'kahip'. Pin earlier versions of DOLFINx to earlier verisons of KaHIP for proper detection.
Co-authored-by: Chris Richardson <chris@bpi.cam.ac.uk>
Co-authored-by: Garth N. Wells <gnw20@cam.ac.uk>
Fixes missing chgrp on symlinks in package installations, and errors on
symlinks referencing non-existent or non-writable locations.
Note: `os.chown(.., follow_symlinks=False)` is python3 only, but
`os.lchown` exists in both versions.
* Change license dir from hard-coded to a configurable item
* Change config item to be a string not an array
Co-authored-by: Todd Gamblin <tgamblin@llnl.gov>
Trying to compute `dag_hash()` or `package_hash()` on a concrete spec that doesn't have
a `_package_hash` attribute would attempt to recompute the package hash.
This most commonly manifests as a failed lookup of a namespace if you attempt to uninstall
or compute the hashes of packages in exsternal repositories that aren't registered, e.g.:
```console
> spack spec --json c/htno
==> Error: Unknown namespace: myrepo
```
While it wouldn't change the already-assigned `dag_hash` value, this behavior is
incorrect, since the package file for a previously concrete spec:
1. might have changed since concretization,
2. might not exist anymore, or
3. might just not be findable by Spack.
This PR ensures that the package hash can't be computed on older concrete specs. Instead
of calling `package_hash()` from within `to_node_dict()`, we now check for the `_package_hash`
attribute and only add the package_hash to the spec record if it's there.
This PR also handles the tricky semantics of computing `package_hash()` at concretization
time. We have to compute it *before* marking the spec concrete so that `to_node_dict` can
use it. But this means that the logic for `package_hash()` can't rely on `spec.concrete`,
as it is called *during* concretization. Instead of checking for concreteness, `package_hash()`
now checks `_patches_assigned()` to determine whether it should add them to the package
hash.
- [x] Add an assert to `package_hash()` so it can't be called on specs for which it
would be wrong.
- [x] Add an `_assign_hash()` method to handle tricky semantics of `package_hash`
and `dag_hash`.
- [x] Rework concretization to call `_assign_hash()` before and after marking specs
concrete.
- [x] Rework content hash part of package hash to check for `_patches_assigned()`
instead of `spec.concrete`.
- [x] regression test
* [py-tensorflow-hub] applied patch for newer version of zlib
* [py-tensorflow-hub] patch also applies to 0.11.0
* [py-tensorflow-hub] Audit fix
1. patch URL in package py-tensorflow-hub must end with ?full_index=1
Newer versions of gobject-introspection require Meson to build. Convert
the package into a hybrid one that still supports older versions using
Autotools.
* arm-forge: Download via HTTPS
Update download URL to use HTTPS (rather than HTTP)
* arm-forge: Allow +probe to depend on python3
Allow python dependency required for arm-forge+probe to be python3 as
well as 2.7.x
* arm-forge: Add versions up to 22.0.1
By default, libfuse install helper programs like `fusermount3`, which
are mostly useless if not installed with setuid (that is, `+useroot`).
However, their presence makes it complicated to use globally installed
versions, which can be combined with a Spack-installed FUSE library.
In particular, on systems that have a setuid fusermount3 binary, but no
libfuse-dev installed, it is nice to be able to build libfuse with Spack, and
have it call the system setuid executable.
* Correcting include and library paths using patch file for RVS to build
following library files in spack.
libperf.so.0.0
libpebb.so.0.0
libiet.so.0.0
libgst.so.0.0
libpqt.so.0.0
libmem.so.0.0
libbabel.so.0.0
* Correcting include and library paths using patch file for RVS to build
following library files in spack.
libperf.so.0.0
libpebb.so.0.0
libiet.so.0.0
libgst.so.0.0
libpqt.so.0.0
libmem.so.0.0
libbabel.so.0.0
* Replacing ROCM_PATH with RPATH in the deviceid.sh before installing in Spack build.
* Reducing multiple enviroment variable for HIP and HSA path
- Removed gl dependency.
- Specify clang as cmake compiler as gcc was being
improperly picked up. As a result, ffi include
path was needed in C/CXX flags.
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
Previously we sorted by hash values for `spack graph`, but changing hashes can make the
test brittle and the node order seem nondeterministic to users.
- [x] Sort nodes in `spack graph` by the default edge order, which takes into account
parent and child names as well as dependency types.
- [x] Update ASCII test output for new order.
The dependency check currently checks whether there are only build
dependencies left for a particular package. However, the database also
contains uninstalled packages, which can cause the check to fail.
For instance, with `bison` and `flex` having already been uninstalled,
`m4` will have the following dependents:
```
bison ('build', 'run')--> m4
flex ('build',)--> m4
libnl ('build',)--> m4
```
`bison` and `flex` should be ignored in this case because they are not
installed anymore.
Fixes#30673
* ceed50: add ceed 5.0.0 and pumi 2.2.7
* libceed-0.10
* ceed50: add omegah
* omega-h: mpi and cuda builds work
* omega-h: fix style
* New package: libfms
* New version: gslib@1.0.7
CEED: add some TODO items for the 5.0 release
* ceed: variant name consistent with package name
* LAGHOS: allow newer versions of MFEM to be used with v3.1
* LIBCEED: add missing 'install' target in 'install_targets'
* CEED: address some TODO items + some tweaks
* MFEM: add new variant for FMS (libfms)
* CEED: v5.0.0 depends on 'libfms' and 'mfem+fms'
* RATEL: add missing 'install' target in 'install_targets'
* CEED: add dependency for v5.0.0 on Ratel v0.1.2
* CEED: add Nek-related dependencies for ceed@5.0.0
* CEED: v5.0.0 depends on MAGMA v2.6.2
* libCEED: set the `CUDA_ARCH` makefile parameter
* libCEED: set the `HIP_ARCH` makefile parameter
Co-authored-by: Jed Brown <jed@jedbrown.org>
Co-authored-by: Veselin Dobrev <dobrev@llnl.gov>
Co-authored-by: Veselin Dobrev <v-dobrev@users.noreply.github.com>
#24556 merged in support for Python's .zip file support via ZipFile.
However as per #30200 ZipFile does not preserve file permissions of
the extracted contents. This PR returns to using the `unzip`
executable on non-Windows systems (as was the case before #24556)
and now uses `tar` on Windows to extract .zip files.
We previously had checks in `directory_layout` to check for build-dependency
conflicts when we weren't storing build dependencies. We don't need
those anymore; we can just rely on the DAG hash now that it includes everything
we know about each spec.
- [x] Remove vestigial code for checking installed spec against concrete spec
in `ensure_installed()`
- [x] Remove `SpecHashCollisionError` -- if specs have the same hash now, they're
the same as far as `DirectoryLayout` should be concerned.
- [x] Convert spec comparison to `dag_hash()` comparison when adding extensions.
The database now stores full hashes, so we need to adjust the criteria we use to
determine if something can be uninstalled. Specifically, it's ok to uninstall thing that
have remaining build-only dependents.
With the original DAG hash, we did not store build dependencies in the database, but
with the full DAG hash, we do. Previously, we'd never tell the concretizer about build
dependencies of things used by hash, because we never had them. Now, we have to avoid
telling the concretizer about them, or they'll unnecessarily constrain build
dependencies for new concretizations.
- [x] Make database track all dependencies included in the `dag_hash`
- [x] Modify spec_clauses so that build dependency information is optional
and off by default.
- [x] `spack diff` asks `spec_clauses` for build dependencies for completeness
- [x] Modify `concretize.lp` so that reuse optimization doesn't affect fresh
installations.
- [x] Modify concretizer setup so that it does *not* prioritize installed versions
over package versions. We don't need this with reuse, so they're low priority.
- [x] Fix `test_installed_deps` for full hash and new concretizer (does not work
for old concretizer with full hash -- leave this for later if we need it)
- [x] Move `test_installed_deps` mock packages to `builtin.mock` for easier debugging
with `spack -m`.
- [x] Fix `test_reuse_installed_packages_when_package_def_changes` for full hash
- [x] update test to use `build_hash` instead of `dag_hash`, as we're testing for
graph structure, and specifically NOT testing for package changes.
- [x] make hash descriptors callable on specs to simplify syntax for invoking them
- [x] make `Spec.spec_hash()` public
This removes all but one usage of runtime hash. The runtime hash was being used to write
historical lockfiles for tests, but we don't need it for that; we can just save those
lockfiles.
- [x] add legacy lockfiles for v1, v2, v3
- [x] fix bugs with v1 lockfile tests (the dummy lockfile we were writing was not actually
a v1 lockfile because it used the new spec file format).
- [x] remove all but one runtime_hash usage -- that one needs a small rework of the
concretizer to really fix, as it's about separate concretization of build
dependencies.
- [x] Document the history of the lockfile format in `environment/__init__.py`
Some test cases had to be modified in a kludgy way so that abstract specs made
concrete would have versions on them. We shouldn't *need* to do this, as the
only reason we care is because the content hash has to be able to get an archive
for a version.
This modifies the content hash so that it can be called on abstract specs,
including only relevant content.
This does NOT add a partial content hash to the DAG hash, as we do not really
want that -- we don't need in-memory spec hashes to need to load package files.
It just makes `Package.content_hash()` less prickly and tests easier to
understand.
`spack monitor` expects a field called `spec_full_hash`, so we shouldn't change that.
Instead, we can pass a `dag_hash` (which is now the full hash) but not change the field
name.
`hashes_final` was used to indicate when a spec was concrete but possibly lacked
`full_hash` or `build_hash` fields. This was only necessary because older Spacks
didn't generate them, and we want to avoid recomputing them, as we likely do not
have the same package files as existed at concretization time.
Now, we don't need to do that -- there is only the DAG hash and specs are either
concrete and have a `dag_hash`, or not concrete and have no `dag_hash`. There's
no middle ground.
Without some enforcement of spec ordering, python 2 produced
different results in the affected test than did python 3. This
change makes the arbitrary but reproducible decision to sort
the specs by their lockfile key alphabetically.
The full hash appears twice in the spec dict now, replacing just
the value replaces it under "hash" and "full_hash". Only replace
the one that appears after "full_hash".
I'm actually not sure what purpose this test served, so maybe it
could be removed, as it may be testing some distinction between
full and dag hash which no longer exists.
For a long time, Spack has used a coarser hash to identify packages
than it likely should. Packages are identified by `dag_hash()`, which
includes only link and run dependencies. Build dependencies are
stripped before hashing, and we have notincluded hashes of build
artifacts or the `package.py` files used to build. This means the
DAG hash actually doesn't represent all the things Spack can build,
and it reduces reproducibility.
We did this because, in the early days, users were (rightly) annoyed
when a new version of CMake, autotools, or some other build dependency
would necessitate a rebuild of their entire stack. Coarsening the hash
avoided this issue and enabled a modicum of stability when only reusing
packages by hash match.
Now that we have `--reuse`, we don't need to be so careful. Users can
avoid unnecessary rebuilds much more easily, and we can add more
provenance to the spec without worrying that frequent hash changes
will cause too many rebuilds.
This commit starts the refactor with the following major change:
- [x] Make `Spec.dag_hash()` include build, run, and link
dependencides and the package hash (it is now equivalent to
`full_hash()`).
It also adds a couple of bugfixes for problems discovered during
the switch:
- [x] Don't add a `package_hash()` in `to_node_dict()` unless
the spec is concrete (fixes breaks on abstract specs)
- [x] Don't add source ids to the package hash for packages without
a known fetch strategy (may mock packages are like this)
- [x] Change how `Spec.patches` is memoized. Using
`llnl.util.lang.memoized` on `Spec` objects causes specs to
be stored in a `dict`, which means they need a hash. But,
`dag_hash()` now includes patch `sha256`'s via the package
hash, which can lead to infinite recursion
For tutorial builds, we should continue to allow deprecated builds to be installed. We
can update them as needed when we update the tutorial, but we don't need to correct them
immediately on deprecation in CI.
- [x] add `deprecated:true` to tutorial `spack.yaml` config.
* updating googletest version to 1.11 to avoid GTEST_DISALLOW_ASSIGN_ error
* limiting the version scope
* modified the version limit
Co-authored-by: mohan babu <mohbabul@amd.com>
Upstream neovim builds with luajit-openresty or luajit in almost all
cases. To support the current usage, a user can specify that they want
lua, but this will allow the use of the normal (faster, better tested
and better maintained) setup.
* Add checksum for py-pylint@2.13.5
* Update dependencies
* Add checksum for py-astroid@2.11.4
* Correct py-toml addition and add py-tomli dependency
* Remove py-pytoml dependency for versions @2.13:
* Modify py-astroid version range
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Discontinue py-astroid dependency @2.8.0:2.8 for new versions
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Discontinue py-mccabe dependency @0.6.0:0.6 for new versions
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Remove mccabe and setuptools-scm dependencies
* Update astroid dependencies
* Extend py-typed-ast version range to future releases
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* py-dill only required for version 2.13.5 and above
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Add maccabe dependency and correct setuptools run dependency
* Setuptools fix
* Add setuptools as run dependency
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* py-pyarrow: Add version 7.0.0
* Add version constraints on dependencies
* Add version 8.0.0
* arrow: Add version 8.0.0
* py-pyarrow: Allow version 8.0.0 of arrow
* Bump up rocm release version to rocm-5.1.0
* update rocm-opencl for rocm-5.1.0 release
* update the migraphx,miopen(hip,opencl),mivisionx,rocm-tensile
* update the mlirmiopen checksum version
- [x] Add `mkdir -p` and `chmod` to ensure `/home/spack-test` exists and
has correct permissions.
- [x] Remove version comments from dependabot-managed action commits
- [x] Don't duplicate comment describing required fixes for distros with
patched git
`spack pkg list` tests were broken by #29593 for cases when your `builtin.mock` repo
still has stale backup files (or, really, stale directories) sitting around. This
happens if you switch branches a lot. In this case, things like this were causing
erroneous packages in the mock listing:
```
var/spack/repos/builtin.mock/packages/
foo/
package.py~
```
- [x] make `list_packages` consider only directories with one-deep `package.py` files.
Reworking lua to allow easier substitution of the base lua implementation.
Also adding in a maintained version of luajit and re-factoring the entire stack
to use a custom build-system to centralize functionality like environment
variable management and luarocks installation.
The `lua-lang` virtual is now versioned so that a package that requires
Lua 5.1 semantics can get any lua, but one that requires 5.2 will only
get upstream lua.
The luaposix package requires lua-bit32, but only when built with a
lua conforming to version 5.1. This adds the package, and the
dependencies, but exposed a problem with luarocks dependency
detection. Since we're installing each package in its own "tree" and
there's no environment variable to list extra trees, spack now
generates a luarocks config file that lists all the trees of all the
dependencies, and references it by setting `LUAROCKS_CONFIG`
in the build environment of every LuaPackage. This allows luarocks
to find the spack installed dependencies correctly rather than
trying (and failing) to download them.
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Tom Scogland <tscogland@llnl.gov>
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
Some of our `git` tests still fail when `init.defaultBranch` is set to something other
than `master`.
- [x] get rid of all hard-coded `master` refs
- [x] Use `'default'` to key tests that use the default branch
When running on Windows, Spack may generate files in the stage/install
prefixes that do not have write permissions, which prevents the
removal of those directories (e.g. when cleaning stages or uninstalling).
There should be a refactoring to avoid this in the first place, but that
is assumed to be longer term, so the temporary fix is to make such files
writable if they are not. This PR:
* Automatically handles these permissions errors when uninstalling
packages from the Spack root (makes then writable)
* Updates similar already-existing logic when removing Spack-managed
stage directories (the error-handling was assuming all errors were
permissions errors and was therefore handling other errors
inappropriately)
Note: these permissions issues only appear on Windows so this logic is
only applied there (permissions are not modified for this purpose on
Linux etc.).
This also adds special handling for a case where calling `isdir`
on an `os.DirEntry` object would fail for improperly-created symlinks
(e.g. on Windows, using `os.symlink` without `target_is_directory=True`).
Note this specific issue only came up when enabling link_tree tests
(specifically `source_merge_visitor_cant_be_cyclical`).
* create function for translating compiler names on specs/compiler entries in manifest
* add tests for translating compiler names on spec/compiler entries
* use higher-level function in test and add comment to prefer testing via higher-level function
* opensuse clingo check should not fail on account of this pr, but I cannot get it to pass by restarting via CI UI
* Addition of 1.1.9dev version.
* Small style fix -- extra blank line.
* Update var/spack/repos/builtin/packages/py-maestrowf/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-maestrowf/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-maestrowf/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-maestrowf/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Additional dependencies and version constraints.
* Revert to py-poetry.
* Remove run from cryptography (build only).
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Force GCC to always provide a C++14 flag
Updated gnu logic so that the c++14 flag for g++ is always propagated.
This fixes issues with build systems that error out if passed an empty
string for a flag.
Engaging in the best kind of software engineering by updating the unit
test to pass with the value it is now passed. This should better match
the expected flag for g++ compiling with the C++14 standard
* Add py-docutils@0.16
* Add sphinx-tabs package
* Update var/spack/repos/builtin/packages/py-sphinx-tabs/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-sphinx-tabs/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-sphinx-tabs/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
This ensures that multiple spack instances called from `make` will respect the maximum number of jobs in the POSIX jobserver across packages.
Co-authored-by: Harmen Stoppels <harmenstoppels@gmail.com>
Problem: GCC 9.4.0 catches a bad integer comparison in
resource/hlapi/bindings/c++/reapi_cli_impl.hpp in flux-sched@0.22.0
and current master.
Add a patch to work around the problem until an upstream fix is
available.
* use the init.defaultBranch name, not master
* make tcl and modules/common independent
Both used to use not just the same directory, but the same *file* for
their outputs. In parallel this can cause problems, but it can also
accidentally allow expected failures to pass if the file is left around
by mistake.
* use a non-global misc_cache in tests
* make pkg tests resilient to gitignore
* make source cache and module directories non-global
`make` solves a lot of headaches that would otherwise have to be implemented in Spack:
1. Parallelism over packages through multiple `spack install` processes
2. Orderly output of parallel package installs thanks to `make --sync-output=recurse` or `make -Orecurse` (works well in GNU Make 4.3; macOS is unfortunately on a 16 years old 3.x version, but it's one `spack install gmake` away...)
3. Shared jobserver across packages, which means a single `-j` to rule them all, instead of manually finding a balance between `#spack install processes` & `#jobs per package` (See #30302).
This pr adds the `spack env depfile` command that generates a Makefile with dag hashes as
targets, and dag hashes of dependencies as prerequisites, and a command
along the lines of `spack install --only=packages /hash` to just install
a single package.
It exposes two convenient phony targets: `all`, `fetch-all`. The former installs the environment, the latter just fetches all sources. So one can either use `make all -j16` directly or run `make fetch-all -j16` on a login node and `make all -j16` on a compute node.
Example:
```yaml
spack:
specs: [perl]
view: false
```
running
```
$ spack -e . env depfile --make-target-prefix env | tee Makefile
```
generates
```Makefile
SPACK ?= spack
.PHONY: env/all env/fetch-all env/clean
env/all: env/env
env/fetch-all: env/fetch
env/env: env/.install/cdqldivylyxocqymwnfzmzc5sx2zwvww
@touch $@
env/fetch: env/.fetch/cdqldivylyxocqymwnfzmzc5sx2zwvww env/.fetch/gv5kin2xnn33uxyfte6k4a3bynhmtxze env/.fetch/cuymc7e5gupwyu7vza5d4vrbuslk277p env/.fetch/7vangk4jvsdgw6u6oe6ob63pyjl5cbgk env/.fetch/hyb7ehxxyqqp2hiw56bzm5ampkw6cxws env/.fetch/yfz2agazed7ohevqvnrmm7jfkmsgwjao env/.fetch/73t7ndb5w72hrat5hsax4caox2sgumzu env/.fetch/trvdyncxzfozxofpm3cwgq4vecpxixzs env/.fetch/sbzszb7v557ohyd6c2ekirx2t3ctxfxp env/.fetch/c4go4gxlcznh5p5nklpjm644epuh3pzc
@touch $@
env/dirs:
@mkdir -p env/.fetch env/.install
env/.fetch/%: | env/dirs
$(info Fetching $(SPEC))
$(SPACK) -e '/tmp/tmp.7PHPSIRACv' fetch $(SPACK_FETCH_FLAGS) /$(notdir $@) && touch $@
env/.install/%: env/.fetch/%
$(info Installing $(SPEC))
+$(SPACK) -e '/tmp/tmp.7PHPSIRACv' install $(SPACK_INSTALL_FLAGS) --only-concrete --only=package --no-add /$(notdir $@) && touch $@
# Set the human-readable spec for each target
env/%/cdqldivylyxocqymwnfzmzc5sx2zwvww: SPEC = perl@5.34.1%gcc@10.3.0+cpanm+shared+threads arch=linux-ubuntu20.04-zen2
env/%/gv5kin2xnn33uxyfte6k4a3bynhmtxze: SPEC = berkeley-db@18.1.40%gcc@10.3.0+cxx~docs+stl patches=b231fcc arch=linux-ubuntu20.04-zen2
env/%/cuymc7e5gupwyu7vza5d4vrbuslk277p: SPEC = bzip2@1.0.8%gcc@10.3.0~debug~pic+shared arch=linux-ubuntu20.04-zen2
env/%/7vangk4jvsdgw6u6oe6ob63pyjl5cbgk: SPEC = diffutils@3.8%gcc@10.3.0 arch=linux-ubuntu20.04-zen2
env/%/hyb7ehxxyqqp2hiw56bzm5ampkw6cxws: SPEC = libiconv@1.16%gcc@10.3.0 libs=shared,static arch=linux-ubuntu20.04-zen2
env/%/yfz2agazed7ohevqvnrmm7jfkmsgwjao: SPEC = gdbm@1.19%gcc@10.3.0 arch=linux-ubuntu20.04-zen2
env/%/73t7ndb5w72hrat5hsax4caox2sgumzu: SPEC = readline@8.1%gcc@10.3.0 arch=linux-ubuntu20.04-zen2
env/%/trvdyncxzfozxofpm3cwgq4vecpxixzs: SPEC = ncurses@6.2%gcc@10.3.0~symlinks+termlib abi=none arch=linux-ubuntu20.04-zen2
env/%/sbzszb7v557ohyd6c2ekirx2t3ctxfxp: SPEC = pkgconf@1.8.0%gcc@10.3.0 arch=linux-ubuntu20.04-zen2
env/%/c4go4gxlcznh5p5nklpjm644epuh3pzc: SPEC = zlib@1.2.12%gcc@10.3.0+optimize+pic+shared patches=0d38234 arch=linux-ubuntu20.04-zen2
# Install dependencies
env/.install/cdqldivylyxocqymwnfzmzc5sx2zwvww: env/.install/gv5kin2xnn33uxyfte6k4a3bynhmtxze env/.install/cuymc7e5gupwyu7vza5d4vrbuslk277p env/.install/yfz2agazed7ohevqvnrmm7jfkmsgwjao env/.install/c4go4gxlcznh5p5nklpjm644epuh3pzc
env/.install/cuymc7e5gupwyu7vza5d4vrbuslk277p: env/.install/7vangk4jvsdgw6u6oe6ob63pyjl5cbgk
env/.install/7vangk4jvsdgw6u6oe6ob63pyjl5cbgk: env/.install/hyb7ehxxyqqp2hiw56bzm5ampkw6cxws
env/.install/yfz2agazed7ohevqvnrmm7jfkmsgwjao: env/.install/73t7ndb5w72hrat5hsax4caox2sgumzu
env/.install/73t7ndb5w72hrat5hsax4caox2sgumzu: env/.install/trvdyncxzfozxofpm3cwgq4vecpxixzs
env/.install/trvdyncxzfozxofpm3cwgq4vecpxixzs: env/.install/sbzszb7v557ohyd6c2ekirx2t3ctxfxp
env/clean:
rm -f -- env/env env/fetch env/.fetch/cdqldivylyxocqymwnfzmzc5sx2zwvww env/.fetch/gv5kin2xnn33uxyfte6k4a3bynhmtxze env/.fetch/cuymc7e5gupwyu7vza5d4vrbuslk277p env/.fetch/7vangk4jvsdgw6u6oe6ob63pyjl5cbgk env/.fetch/hyb7ehxxyqqp2hiw56bzm5ampkw6cxws env/.fetch/yfz2agazed7ohevqvnrmm7jfkmsgwjao env/.fetch/73t7ndb5w72hrat5hsax4caox2sgumzu env/.fetch/trvdyncxzfozxofpm3cwgq4vecpxixzs env/.fetch/sbzszb7v557ohyd6c2ekirx2t3ctxfxp env/.fetch/c4go4gxlcznh5p5nklpjm644epuh3pzc env/.install/cdqldivylyxocqymwnfzmzc5sx2zwvww env/.install/gv5kin2xnn33uxyfte6k4a3bynhmtxze env/.install/cuymc7e5gupwyu7vza5d4vrbuslk277p env/.install/7vangk4jvsdgw6u6oe6ob63pyjl5cbgk env/.install/hyb7ehxxyqqp2hiw56bzm5ampkw6cxws env/.install/yfz2agazed7ohevqvnrmm7jfkmsgwjao env/.install/73t7ndb5w72hrat5hsax4caox2sgumzu env/.install/trvdyncxzfozxofpm3cwgq4vecpxixzs env/.install/sbzszb7v557ohyd6c2ekirx2t3ctxfxp env/.install/c4go4gxlcznh5p5nklpjm644epuh3pzc
```
Then with `make -O` you get very nice orderly output when packages are built in parallel:
```console
$ make -Orecurse -j16
spack -e . install --only-concrete --only=package /c4go4gxlcznh5p5nklpjm644epuh3pzc && touch c4go4gxlcznh5p5nklpjm644epuh3pzc
==> Installing zlib-1.2.12-c4go4gxlcznh5p5nklpjm644epuh3pzc
...
Fetch: 0.00s. Build: 0.88s. Total: 0.88s.
[+] /tmp/tmp.b1eTyAOe85/store/linux-ubuntu20.04-zen2/gcc-10.3.0/zlib-1.2.12-c4go4gxlcznh5p5nklpjm644epuh3pzc
spack -e . install --only-concrete --only=package /sbzszb7v557ohyd6c2ekirx2t3ctxfxp && touch sbzszb7v557ohyd6c2ekirx2t3ctxfxp
==> Installing pkgconf-1.8.0-sbzszb7v557ohyd6c2ekirx2t3ctxfxp
...
Fetch: 0.00s. Build: 3.96s. Total: 3.96s.
[+] /tmp/tmp.b1eTyAOe85/store/linux-ubuntu20.04-zen2/gcc-10.3.0/pkgconf-1.8.0-sbzszb7v557ohyd6c2ekirx2t3ctxfxp
```
For Perl, at least for me, using `make -j16` versus `spack -e . install -j16` speeds up the builds from 3m32.623s to 2m22.775s, as some configure scripts run in parallel.
Another nice feature is you can do Makefile "metaprogramming" and depend on packages built by Spack. This example fetches all sources (in parallel) first, print a message, and only then build packages (in parallel).
```Makefile
SPACK ?= spack
.PHONY: env
all: env
spack.lock: spack.yaml
$(SPACK) -e . concretize -f
env.mk: spack.lock
$(SPACK) -e . env depfile -o $@ --make-target-prefix spack
fetch: spack/fetch
@echo Fetched all packages && touch $@
env: fetch spack/env
@echo This executes after the environment has been installed
clean:
rm -rf spack/ env.mk spack.lock
ifeq (,$(filter clean,$(MAKECMDGOALS)))
include env.mk
endif
```
* Use patches from IBM's Open CE project to enable PyTorch to build on
Power systems.
Cherry-pick a patch to allow earlier versions of PyTorch to build with
CUDA 11.4.
* Update var/spack/repos/builtin/packages/py-torch/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* octopus: adding versions up to 11.4
* octopus: add smoke tests
* octopus: add necessary flags for gcc@10
* octopus: update to compilation and dependencies
* octopus: adding new variants
* octopus: remove 'poke' (as this poke is not in spack [yet])
* octopus: allow compilation from git repo develop branch
* octopus: adapt to spack style requirements
* octopus: add maintainer
* octopus: make tests after install optional
Thank you @tldahlgren
* octopus: follow recommended practice for test input data
Move the two configuration files we use for smoke tests into `test`
subdirectory. Thanks @tldahlgren.
* Adding maintainer
with their agreement by email
* octopus: reduce duplication of flags
- part of code review
* octopus: https is preferred over http
* octopus: remove .99 from versioning information
Thanks to https://github.com/spack/spack/pull/26402, we can drop the
"2:3.99" notation when we mean all versions 2.x and 3.x
Examples: b9e72557e8 (diff-b8373d30b3a141c495c2281273ee6184fc513413142afaf2adac1f406cd6b0d7)
(from review)
* octopus: args.extend([x]) -> args.append(x)
(hint from review)
libassimp has been a dependency for all of 5.x but expressing that has
varied significantly throughout the 5.x lifecycle:
v5.0: qt3d uses internal-only libassimp
v5.5: external-only libassimp
v5.6: either internal or external libassimp via autodetection
v5.9: user-selectable internal-vs-external via -assimp
v5.14: additional qtquick3d module uses -assimp
v5.15: qtquick3d switches to the -quick3d-assimp option
* current bug where the incorrect target is setup
* Add mimalloc package
* Add mimalloc as allocator option to pika
* Add mimalloc as allocator option to hpx
* Set git property globally instead of per-version in pika, hpx, and mimalloc packages
Co-authored-by: Mikael Simberg <mikael.simberg@iki.if>
Strictly, `sed` is a `build` and `run` dependency in all gpi-2
versions, whereas `gawk` is a `run` (`build` and `run`) dependency for
gpi-2 versions greater or equal (less) than 1.4.0
Gitlab pipelines run for spack already have other S3 storage locations
configured for storage of binaries, so this PR removes the redundant
per-pipeline mirror. As a result, the "cleanup" jobs will no longer be
generated at the end of each pipeline, removing one possible point of
pipeline failure.
The go-bootstrap package doesn't work on aarch64 platforms, so the only way
to build Go is to use gccgo.
Also, some versions of gccgo have a bug that prevents them from compiling
go (see golang/go#47771), so this patch limits gcc to versions newer than
10.4.0 or 11.3.0.
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
* new package: pytaridx
* fixed copyright year
* Update git link
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* added type in python depends
* added pypi link
* Update package.py
* Update package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Metall package: add dependency to GCC for build test
* Package Metall: add v.017
* Package Metall: update the package file
* Update var/spack/repos/builtin/packages/metall/package.py
Co-authored-by: Bernhard Kaindl <43588962+bernhardkaindl@users.noreply.github.com>
* Metall package: add v0.18 and v0.19
* Metall Package: add v0.20
Co-authored-by: Bernhard Kaindl <43588962+bernhardkaindl@users.noreply.github.com>
Starting with MPICH 3.4, we offer different datatype engine options
(dataloop or yaksa). The default is 'auto', which will choose based on
the device configuration. Starting with MPICH 4.0, building against an
external yaksa library is supported.
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
Added support for finding the OpenCV package via the find external
command. Included support for identifying variants based on available
shared libraries.
Added support to finding the OpenBLAS package via the find external
command.
Enabled packages to show that they can be discovered via the find
external command in the info message.
Updated the OpenCV and OpenBLAS packages to use the extensible search
mechanism for library extensions on multiple OS platforms.
Corrected how find externals works on Darwin for OpenCV and OpenBLAS
to accommodate that the version numbers are placed before the file
extension instead of after it, as on Linux.
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
* librsb: added v1.2.0.10 (#26043)
* librsb: add v1.2.0.11/v1.3.0.0 (#28636)
* librsb: add v1.3.0.1 (#30424)
* unconflict clang
* address apparent style issues
given
https://github.com/spack/spack/runs/6248126997?check_suite_focus=true
and its excerpt
var/spack/repos/builtin/packages/librsb/package.py:27: [E265] block comment should start with '# '
var/spack/repos/builtin/packages/librsb/package.py:52: [E211] whitespace before '('
var/spack/repos/builtin/packages/librsb/package.py:53: [E211] whitespace before '('
var/spack/repos/builtin/packages/librsb/package.py:53: [E501] line too long (89 > 88 characters)
var/spack/repos/builtin/packages/librsb/package.py:54: [E211] whitespace before '('
var/spack/repos/builtin/packages/librsb/package.py:55: [E211] whitespace before '('
var/spack/repos/builtin/packages/librsb/package.py:56: [E211] whitespace before '('
var/spack/repos/builtin/packages/librsb/package.py:57: [E211] whitespace before '('
var/spack/repos/builtin/packages/librsb/package.py:59: [E211] whitespace before '('
var/spack/repos/builtin/packages/librsb/package.py:60: [E211] whitespace before '('
var/spack/repos/builtin/packages/librsb/package.py:62: [E211] whitespace before '('
var/spack/repos/builtin/packages/librsb/package.py:63: [E211] whitespace before '('
var/spack/repos/builtin/packages/librsb/package.py:64: [E211] whitespace before '('
var/spack/repos/builtin/packages/librsb/package.py:66: [E211] whitespace before '('
var/spack/repos/builtin/packages/librsb/package.py:68: [E211] whitespace before '('
var/spack/repos/builtin/packages/librsb/package.py:70: [E211] whitespace before '('
var/spack/repos/builtin/packages/librsb/package.py:71: [E211] whitespace before '('
let these changes flow in.
* +asan+native: mark as conflict; thanks @tldahlgren
* +asan conflict grouped with other conflicts
As suggested as good Spack style by @tldahlgren .
- Keep long lists in alphabetical order for easier reading
- Add a placeholder for Exa.TrkX plugin since we're missing a dep on the
Spack side
- Add support for the ONNX plugin since Spack now has an ONNX runtime
package
- Use spack's pybind11 package now that we're given the option to do so
This adds the newest stable version (and removes old development
versions), a few missing dependencies and workarounds for build
failures. Without the environment variables, sysstat will try creating
directories in `/var/log`, and without `--disable-file-attr`, sysstat
will try to change file ownership.
* gdal: changing behavior of configure for +xml2 with 3.0+
* Update var/spack/repos/builtin/packages/gdal/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Add checksum for py-more-itertools@8.12.0 and fix python dependency
* Add checksum for py-prettytable@3.2.0
* Package version 8.11.0 is the only version that requires python 3.6+
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Add reference to python@3.6 support when 8.11
* Revert "Add reference to python@3.6 support when 8.11"
This reverts commit 0ba0002193.
* Add python 3.7: requirement
* Revert range for python 3.6
* Revert py-more-itertools modifications
Co-authored-by: aandvalenzuela <andrea.valenzuela.ramirez@cern.ch>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
This is an amended version of https://github.com/spack/spack/pull/24894 (reverted in https://github.com/spack/spack/pull/29603). https://github.com/spack/spack/pull/24894
broke all instances of `spack external find` (namely when it is invoked without arguments/options)
because it was mandating the presence of a file which most systems would not have.
This allows `spack external find` to proceed if that file is not present and adds tests for this.
- [x] Add a test which confirms that `spack external find` successfully reads a manifest file
if present in the default manifest path
--- Original commit message ---
Adds `spack external read-cray-manifest`, which reads a json file that describes a
set of package DAGs. The parsed results are stored directly in the database. A user
can see these installed specs with `spack find` (like any installed spec). The easiest
way to use them right now as dependencies is to run
`spack spec ... ^/hash-of-external-package`.
Changes include:
* `spack external read-cray-manifest --file <path/to/file>` will add all specs described
in the file to Spack's installation DB and will also install described compilers to the
compilers configuration (the expected format of the file is described in this PR as well including examples of the file)
* Database records now may include an "origin" (the command added in this PR
registers the origin as "external-db"). In the future, it is assumed users may want
to be able to treat installs registered with this command differently (e.g. they may
want to uninstall all specs added with this command)
* Hash properties are now always preserved when copying specs if the source spec
is concrete
* I don't think the hashes of installed-and-concrete specs should change and this
was the easiest way to handle that
* also specs that are concrete preserve their `.normal` property when copied
(external specs may mention compilers that are not registered, and without this
change they would fail in `normalize` when calling `validate_or_raise`)
* it might be this should only be the case if the spec was installed
- [x] Improve testing
- [x] Specifically mark DB records added with this command (so that users can do
something like "uninstall all packages added with `spack read-external-db`)
* This is now possible with `spack uninstall --all --origin=external-db` (this will
remove all specs added from manifest files)
- [x] Strip variants that are listed in json entries but don't actually exist for the package
* ASP-based solver: discard unknown packages from reuse
This is an add-on to #28259 that cover for the case of
a single package.py being removed from a repository,
rather than an entire custom repository being removed.
* Add unit test
CTest determines whether to enable tests using the BUILD_TESTING variable.
This should be used by projects to conditionally enable the compilation of tests.
Spack knowns which packages have to run tests and can thus automatically define this variable.
I tried to use --overwrite on nvhpc, but nvhpc's install size is 16GB. Seems
better to do os.rename in the same directory than moving the directory to
`/tmp`.
- [x] install --overwrite: use rename instead of tmpdir
- [x] use tempfile
By default `openmpi` needs `rsh` from `openssh`, which is a somewhat
redundant dependency for clusters using slurm. This PR adds a toggle to
allow users to disable the ssh/rsh plm altogether.
This package was not setting FFTW when +mklfft was used with +cuda.
Since both were set to 'True', the default build was not linked to
any FFTW, leading to a run time error. It seems MKL support was
conflated with alternative CPU acceleration support. This PR does the
following:
- adds the altcpu variant to specify non-GPU/CPU acceleration
- sets a conflict between +altcpu and +cuda
- sets an FFTW implementation
- sets fltk+xft when +gui to get a decent looking GUI interface
- sets tbb dependency only when +altcpu
- adds dependency on ctffind
- adds variant and dependency on motioncor2
- sets defaults for
- qsub template location
- ctffind location
- motioncor2 location
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
fixes#28259
This commit discard specs from unknown namespaces from the
ones that can be "reused" during concretization. Previously
Spack would just error out when encountering them.
1. Add version 2022.04.17 (new numbering scheme) and update mbuild resource.
2. Branch 'master' is now 'main'.
3. Old rev 10.2019.03 needs a patch for python vs python3.
The parent thread in the process stdout redirection logic on Windows
was closing a file that was being read in child thread, which lead to
error-based termination of the reader thread. This updates the
interaction to avoid the error.
* Add checksum for py-ipywidgets@7.7.0
* Correct py-widgetsnbextension and py-ipython dependencies
* Update widgetsnbextension dependency to 3.6
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Allow requirement to next versions
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Revert ipyhton dependencies
* Add widgetsnbextension@3.6.0 checksum
Co-authored-by: aandvalenzuela <andrea.valenzuela.ramirez@cern.ch>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* ASP-based solver: allow configuring target selection
This commit adds a new "concretizer:targets" configuration
section, and two options under it.
- "concretizer:targets:granularity" allows switching from
considering only generic targets to consider all possible
microarchitectures.
- "concretizer:targets:host_compatible" instead controls
whether we can concretize for microarchitectures that
are incompatible with the current host.
* Add documentation
* Add unit-tests
* MAINT: Add a debug flag
* MAINT: Apply suggestions from code review
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* openmpi: always require pmix for 4:
`~pmix` is not applicable to version 4+, since it always builds a vendored
copy of pmix (currently 3.2.3).
* pmix: relax version requirements
When the version range was specified, newer versions didn't exist.
Also use normalized spack versions rather than artificial .9.9 /.0.0.
* openmpi: restrict pmix versions
pmix option isn't available for OpenMPI@1, and according to
https://github.com/open-mpi/ompi/issues/7988 , OpenMPI 4.0.1 will not
build with pmix@3.1.5.
* pmix: add newer versions
* OpenMPI: re-express conflicts/configure logic as conditional variants
This relies partly on `self.enable_or_disable` and its ilk to emit an
empty list when the variant isn't applicable.
* ASP-based solver: always consider version of installed packages
fixes#29201
Explicitly add facts for versions of installed software when
using the --reuse option, so that we could consider versions
that are not declared in package.py
The parser is already committing a crime of querying the database for
specs when it encounters a `/hash`. It's helpful, but unfortunately not
helpful when trying to install a specific spec in an environment by
hash. Therefore, consider the environment first, then the database.
This allows the following:
```console
$ spack -e . concretize
==> Starting concretization
==> Environment concretized in 0.27 seconds.
==> Concretized diffutils
- 7vangk4 diffutils@3.8%gcc@10.3.0 arch=linux-ubuntu20.04-zen2
- hyb7ehx ^libiconv@1.16%gcc@10.3.0 libs=shared,static arch=linux-ubuntu20.04-zen2
$ spack -e . install /hyb7ehx
==> Installing libiconv-1.16-hyb7ehxxyqqp2hiw56bzm5ampkw6cxws
...
==> libiconv: Successfully installed libiconv-1.16-hyb7ehxxyqqp2hiw56bzm5ampkw6cxws
Fetch: 0.01s. Build: 17.54s. Total: 17.55s.
[+] /tmp/tmp.VpvYApofVm/store/linux-ubuntu20.04-zen2/gcc-10.3.0/libiconv-1.16-hyb7ehxxyqqp2hiw56bzm5ampkw6cxws
```
1. update for rocm 4.5 and drop support for earlier rocm.
2. no longer use mbedtls or gotcha, they are only for old revs.
3. update version requirements for dyninst and libmonitor
4. begin to deprecate old versions
Fix bug introduced in #30191. `Spec.installed` and `Spec.installed_upstream` should just return
`False` for abstract specs, as they can be called in that context.
- [x] `Spec.installed` returns `False` now instead of asserting that the `Spec`
is concrete.
- [x] `Spec.installed_upstream` returns `False` now instead of asserting that the `Spec`
is concrete.
- [x] `Spec.installed_upstream` no longer caches its result, as install status seems
like a bad thing to cache -- it can easily be invalidated. Calling code should
use transactions if there are peformance issues, as with other places in Spack.
- [x] add tests for `Spec.installed` and `Spec.installed_upstream`
This PR moves the `installed` and `installed_upstream` properties from `PackageBase` to `Spec` and is a step towards being able to reuse specs for which we don't have a `package.py` available. It _should_ be sufficient to complete the concretization step and see the spec in the concretized DAG.
To fully reuse a spec without a package.py though we need a way to serialize enough data to reconstruct the results of calls to:
- `Spec.libs`, `Spec.headers` and `Spec.ommand`
- `Package.setup_dependent_*_environment` and `Package.setup_run_environment`
- [x] Add stub methods to packages with warnings
- [x] Add a missing "root=False" in cmd/fetch.py
- [x] Assert that a spec is concrete before checking installation status
* Add checksum for jupyter-console@6.4.3
* Update py-jupyter-console dependency
* Extend jupyter-client@7.0.0 dependency to newer versions
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: aandvalenzuela <andrea.valenzuela.ramirez@cern.ch>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* py-pystan: Add new package
* Fix dependencies
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Add run dependency to py-setuptools
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Add py-httpstan@4.7.2 and py-pysimdjson@3.2.0
* Dependency
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
This PR updates the list of images we build nightly, deprecating
Ubuntu 16.04 and CentOS 8 and adding Ubuntu 20.04, Ubuntu 22.04
and CentOS Stream. It also removes a lot of duplication by generating
the Dockerfiles during the CI workflow and uploading them as artifacts
for later inspection or reuse.
* ipopt: add goxberry as maintainer
This commit adds 'goxberry' (me, Geoff Oxberry) as a maintainer of the
Ipopt Spack package.
* ipopt: use github url instead of coin-or.org url
This commit changes the package URL for Ipopt from one containing
`coin-or.org` to one containing `github.com`. The rationale for
using `github.com` is as follows:
- The COIN-OR webpage now directs users interested in Ipopt source to
GitHub.
- Ipopt used to have a COIN-OR project homepage actually hosted on
coin-or.org using an SVN-Trac web page. A link to this project
homepage no longer appears within the "Projects" section of
COIN-OR's website.
- COIN-OR issued a 2021-12-15 post on the News section of its web site
(see https://www.coin-or.org/news/) that discusses the impact that
lack of financial support has on COIN-OR software maintenance. It
seems reasonable to suspect that the GitHub project is likely to
outlast the COIN-OR web site.
The sha256 hashes for ipopt@:3.12 downloaded from GitHub differ from
the corresponding COIN-OR versions, so these hashes are also updated.
* ipopt 3.14.5: add new version
This commit adds the latest version of Ipopt, 3.14.5, to the Ipopt
Spack package.
* git: add 2.35.2, explicit version(...)
git 2.35.2 fixes CVE-2022-24765 which seems to only affect Windows. But
nonetheless we should maybe set deprecated=True on older versions... The
restructure allows for that.
* deprecate over CVE-2022-24765
In WarpX 22.04, we introduced the openPMD `thetaMode` for fields in
RZ geometry. That means we need to name the fields differently than
the reconstructured Cartesian slice that we default to in plotfiles.
* ncurses: add wide, nowide headers, libs query parameter options
* readline: only link with libncursesw
Needed for python to detect proper ncurses library #27369
Alter the `install_components/install` script to pass the `-gcc $SPACK_CC`,
`-gpp $SPACK_CXX`, and `-g77 $SPACK_F77` flags to `makelocalrc`. This
ensures that nvhpc is configured to use the spack gcc spec, rather than
whatever gcc is found on the path.
Co-authored-by: Mikael Simberg <simberg@cscs.ch>
Co-authored-by: Harmen Stoppels <harmenstoppels@gmail.com>
Fix test_ci_generate_prune_untouched(), which would fail if run when
the latest commit changed the .gitlab-ci.yml. This change mocks the
get_stack_changed() method in that test to disregard the state of
the current spack repo in favor of a mock repo under test control.
* The configure script on Windows requires that CC/CXX be enclosed
in quotes if the paths to those compiler executables contain
spaces (so unlike most instances of Executable, the arguments
need to contain the quotes)
* OpenSSL requires the nasm package on Windows
* Restore parallel build from 075e942 (accidentally reverted in
#27021)
* py-ipympl: Add new package
* Update var/spack/repos/builtin/packages/py-ipympl/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-ipympl/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-ipympl/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-ipympl/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Remove trailing whitespaces
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* py-webargs: Add new package
* Fix python requirement
* Add run dependency to py-packaging
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
gitlab ci: Set resource requests explicitly
This PR sets resource requests for the Kubernetes executor, which should aid in
better workload scheduling in the cluster. The specific values were derived from
profile data taken from several full "from scratch" rebuilds in a separate worker pool.
Co-authored-by: Zack Galbreath <zack.galbreath@kitware.com>
* serialbox: setup the run and dependent build environments
* Update var/spack/repos/builtin/packages/serialbox/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* rocmlibs: relax rocm-cmake version requirements
The rocm-cmake modules tend to be backwards-compatible, to the extent
that most ROCm math libraries were built using rocm-cmake@master
for a long while without anybody noticing. (That was fixed in
97f0c3ccd9f0a40896998a7580150a514ec3bc37.)
Some packages, like comgr, barely use rocm-cmake for anything, and
we can easily set a very minimal version requirement. For most
packages, however, it would be a lot of effort to determine the
minimum rocm-cmake version required for each release. For those
packages, I just turned the exact version requirement into a
minimum version requirement.
Since I was looking through the CMakeLists.txt for a large number of
libraries, I also took note of the cmake_minimum_required and adjusted
the cmake minimum requirements to match.
* Add rocblas build dependency to hipblas
The rocblas library is required both for both building and linking
hipblas.
* Remove rocm-cmake from vtk-m dependency list
The rocm-cmake package provides CMake scripts that facilitate common
build configuration tasks in the ROCm libraries. It is never needed at
link-time. Also, there are no calls to find_package(ROCM) or
include(ROCM.*)in vtk-m, so this dependency will never be used.
- older versions are no longer available for download so mark them
deprecated
- set manual_download
- set url_for_version
- only install the binary that matches the cuda version
In #26630, I assumed "glu" was needed by glew because it included glu.h, but
actually, glew can be used without glu when GLEW_NO_GLU is defined and this
is documented in the announcement of glew-1.6.0:
> https://www.geeks3d.com/20110430/opengl-glew-1-6-0-available/
> * Define GLEW_NO_GLU for no glu dependency
It is therefore the duty of users of glew to decide if they use glu,
and then they need to have a depends_on("glu").
Thus, move the depends_on("glu") which I changed from "gl" in #26630
to vapor, which itself uses glu as well.
For about a decade GCC has an option `-f[no]-canonical-system-headers`
which basically runs `realpath` on all "system headers", to possibly
reduce the length of paths in diagnostics. [1]
Spack usually installs the "system headers" of GCC in very deeply nested
directories. Calling `realpath` there results in stat calls on every
level, for every header file. On some slow filesystem I have,
`-fno-canonical-system-headers` gives about 5x speedup to compile hello
world in C, meaning that ./configure scripts would be much faster when
using this flag by default.
[1] https://codereview.appspot.com/6495088
Add option to allow using OpenSSL (by default this uses the SSL
implementation that comes with Windows, since that is more likely
to have needed certificates).
* py-awkward: Add new versions
* py-awkward: Update dependencies
* Make setuptools a runtime dependency as well
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Don't rely on NASM's nmake to export install target. Spack
now handles NASM installation; the install tree structure
mimics NASM Windows installer behavior.
* Add dependency on perl
we switched to an optional sphinx based way of
generating docs, so remove pandoc, which can cause
issues with latex conflicts.
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
Bug fixes for package netcdf-cxx4 so that it builds on macOS semi
case-sensitive filesystems; this includes additional changes to build
netcdf-cxx4 consistently with netcdf-fortran.
* netcdf-fortran: remove unused config_flags
* netcdf-fortran: avoid building without the optimization flags
* netcdf-cxx4: do not enforce autoreconf. This was a rudiment from the
times when the package was fetched with git, which broke timestamp
order of the automatically generated Autoconf files.
* netcdf-cxx4: inject PIC flags for C++ when '+pic'
* netcdf-cxx4: inject C/CXXFLAGS via the wrapper
* netcdf-cxx4: fix the underlinking problem for platforms other than darwin
(add netcdf-c libs netcdf-cxx4 ldlibs flags)
* netcdf-cxx4: remove redundant extension of CPPFLAGS
* netcdf-cxx4: only need to use MPI compiler wrapper when building C
(vs both C and C++)
* netcdf-cxx4: remove variant 'static'
This makes it consistent with other packages from the NetCDF
constellation: always build the static libraries and additionally
build the shared ones when '+shared'.
* netcdf-cxx4: do not configure --with/--without-pic.
This makes it consistent with other packages from the NetCDF
constellation: build the shared libraries with the PIC flag and
the static ones without it (the default for Autotools) when
'~pic', and build the static libraries with PIC when '+pic' (to
make them injectable into other shared libraries).
* netcdf-cxx4: run the tests serially
* netcdf-cxx4: build the plugins only when the tests are run
Co-authored-by: Sergey Kosukhin <sergey.kosukhin@mpimet.mpg.de>
gitlab ci: Remove code for relating CDash builds
Relating CDash builds to their dependencies was a seldom used feature. Removing
it will make it easier for us to reorganize our CDash projects & build groups in the
future by eliminating the needs to keep track of CDash build ids in our binary mirrors.
* Allow packages to add a 'submodules' property that determines when ad-hoc Git-commit-based versions should initialize submodules
* add support for ad-hoc git-commit-based versions to instantiate submodules if the associated package has a 'submodules' property and it indicates this should happen for the associated spec
* allow Package-level submodule request to influence all explicitly-defined version() in the Package
* skip test on windows which fails because of long paths
* Set CUDA architectures in ArrayFire based on cuda_arch
The cuda_arch flag was not recognized by the ArrayFire package and
therefore any setting was not respected. This commit adds the appropriate
cmake flags if cuda_arch is specified. If no cuda_arch is specified,
then the flag is set to "Auto" which checks the installed compute
architectures on the build system.
* ArrayFire only requires boost headers to build. Update version to 1.75
ArrayFire only requires boost headers at build time. This commit also
updates the version to 1.75 to avoid some errors in Boost Compute
* Disable tests in ArrayFire by default
* Add support for ArrayFire v3.8.1
* Add maintainer for ArrayFire package
* Remove test variant from ArrayFire. Use comprehensions
* Reduce boost requirement in ArrayFire
* Address cuda_arch suggestions
* Add commit hashes to Release versions of ArrayFire
* Fix style issues in ArrayFire package
Ubuntu patched git v2.25.1 with a security fix that also
introduced a breaking change, so v2.25.1 behaves like
v2.35.2 with respect to the use cases in CVE-2022-24765
* llvm7_intel.patch required for intel@19.1.3 too
* apply llvm7_intel.patch forall intel@19.0 and intel@19.1
Co-authored-by: Daryl W. Grunau <dwg@lanl.gov>
Spack added support in #24639 for ad-hoc Git-commit-hash-based
versions: A user can install a package x@hash, where X is a package
that stores its source code in a Git repository, and the hash refers
to a commit in that repository which is not recorded as an explicit
version in the package.py file for X.
A couple issues were found relating to this:
* If an environment defines an alternative package repo (i.e. with
repos.yaml), and spack.yaml contains user Specs with ad-hoc
Git-commit-hash-based versions for packages in that repo,
then as part of retrieving the data needed for version comparisons
it will attempt to retrieve the package before the environment's
configuration is instantiated.
* The bookkeeping information added to compare ad-hoc git versions was
being stripped from Specs during concretization (such that user
Specs which succeeded before concretizing would then fail after)
This addresses the issues:
* The first issue is resolved by deferring access to the associated
Package until the versions are actually compared to one another.
* The second issue is resolved by ensuring that the Git bookkeeping
information is explicitly applied to Specs after they are concretized.
This also:
* Resolves an ambiguity in the mock_git_version_info fixture used to
create a tree of Git commits and provide a list where each index
maps to a known commit.
* Isolates the cache used for Git repositories in tests using the
mock_git_version_info fixture
* Adds a TODO which points out that if the remote Git repository
overwrites tags, that Spack will then fail when using
ad-hoc Git-commit-hash-based versions
This commit updates the `gpg publish` command to work with the mirror
arguments, when trying to push keys to a mirror.
- [x] update `gpg publish command
- [x] add test for publishing GPG keys and rebuilding the key index within a mirror
* zstd: bring back libs=shared,static and compression=zlib,lz4,lzma variants
Should make building `gcc+binutils ^zstd libs=static` a bit easier (this
is the case where we don't control the compiler wrappers of gcc because
of bootstrapping, nor of ld because of how gcc invokes the linker).
In a typical call to spack, the OperatingSystem gets instantiated
multiple times. For macOS, each one requires a call to `sw_vers`, which
is done through the Executable helper class. Memoizing
reduces the call count from "spac spec" from three to one.
Currently environments are indexed by build hashes. When looking into this bug I noticed there is a disconnect between environments that are concretized in memory for the first time and environments that are read from a `spack.lock`. The issue is that specs read from a `spack.lock` don't have a full hash, since they are indexed by a build hash which is strictly coarser. They are also marked "final" as they are read from a file, so we can't compute additional hashes.
This bugfix PR makes "first concretization" equivalent to re-reading the specs from a corresponding `spack.lock`, and doing so unveiled a few tests were we were making wrong assumptions and relying on the fact that a `spack.lock` file was not there already.
* Add unit test
* Modify mpich to trigger jobs in pipelines
* Fix two failing unit tests
* Fix another full_hash vs. build_hash mismatch in tests
* Ignore top-level module config; add auto-update
In Spack 0.17 we got module sets (modules:[name]:[prop]), and for
backwards compat modules:[prop] was short for modules:default:[prop].
But this makes it awkward to define default config for the "default"
module set.
Since 0.17 is branched off, we can now deprecate top-level module config
(that is, just ignore it with a warning).
This PR does that, and it implements `spack config update modules` to
make upgrading easy (we should have added that to 0.17 already...)
It also removes references to `dotkit` stuff which was already
deprecated in 0.13 and could have been removed in 0.14.
Prefix inspections are the only exception, since the top-level prefix inspections
used for `spack load` and `spack env activate`.
Spack currently allows dependencies to be concretized for an
architecture incompatible with the root. This commit adds rules
to make this situation impossible by design.
* Extract the MetaPathFinder and Loaders for packages in their own classes
https://peps.python.org/pep-0451/
Currently, RepoPath and Repo implement the (deprecated) interface of
MetaPathFinder (find_module) and of Loader (load_module). This commit
extracts both of them and places the code in their own classes.
The MetaPathFinder interface is updated to contain both the deprecated
"find_module" (for Python 2.7 support) and the recommended "find_spec".
Update of the Loader interface is deferred at a subsequent commit.
* Move the lines to be prepended inside "RepoLoader"
Also adjust the naming of a few variables too
* Remove spack.util.imp, since code is only used in spack.repo
* Remove support from loading Python modules Python > 3 but < 3.5
* Remove `Repo._create_namespace`
This function was interacting badly with the MetaPathFinder
and causing issues with "normal" imports. Removing the
function allows to do things like:
```python
import spack.pkg.builtin.mpich
cls = spack.pkg.builtin.mpich.Mpich
```
* Remove code needed to trigger the Singleton evaluation
The finder is coded in a way to trigger the Singleton,
so we don't need external code now that we register it
at module level into `sys.meta_path`.
* Add unit tests
OpenMPI includes cuda_runtime.h, which errors with `#error --
unsupported GNU version! gcc versions later than 9 are not supported!`
By inheriting CudaPackage, the proper conflicts between `cuda` and
`gcc`/`clang` are added.
* mesa, mesa18: Implement the swr variant consistently between mesa and mesa18
* mesa: Bump to 21.3.7
* mesa: Build release by default tie swr to release builds
* mesa, mesa18: re-enable the llvm variant by default
This reverts the change made in #29360
Some servers require `User-Agent` to be set, and otherwise error with
access denied. One such example is mpich.
To fix this, set `User-Agent: Spackbot/[version]` as a header.
Apparently by convention, it should include the word `bot`.
#27021 broke fetching for CVS-based packages because:
- The mirror logic was using URL parsing to extract a path from the
CVS repository location
- #27021 added sanity checks to enforce that strings passed to the
URL parser were actually URLs
This replaces the call to "url_util.parse" with logic that is
customized for CVS. This implies that VCSFetchStrategy should
rename the "url_attr" attribute to something more generic, but
that should be handled separately.
* mpich: add 3.4.3, 4.0, 4.0.1
* mpich: add url_for_version function
For versions 4.0 and up, get tarballs from GitHub. This will help with
CI builds, since the MPICH website denies the urllib user-agent from
downloading release tarballs.
* mpich: disable cuda support
MPICH is failing to build in CI due to a configuration script bug in
detecting CUDA support. Disable CUDA support by default until we add a
proper variant.
Allow declaring possible values for variants with an associated condition. If the variant takes one of those values, the condition is imposed as a further constraint.
The idea of this PR is to implement part of the mechanisms needed for modeling [packages with multiple build-systems]( https://github.com/spack/seps/pull/3). After this PR the build-system directive can be implemented as:
```python
variant(
'build-system',
default='cmake',
values=(
'autotools',
conditional('cmake', when='@X.Y:')
),
description='...',
)
```
Modifications:
- [x] Allow conditional possible values in variants
- [x] Add a unit-test for the feature
- [x] Add documentation
* tests for rewiring pure specs to spliced specs
* relocate text, binaries, and links
* using llnl.util.symlink for windows compat.
Note: This does not include CLI hooks for relocation.
Co-authored-by: Nathan Hanford <hanford1@llnl.gov>
From the tempfile module docs:
The default directory is chosen from a platform-dependent list, but the
user of the application can control the directory location by setting
the TMPDIR, TEMP or TMP environment variables
missing dependencies
- boost
- lzo
Also, turn off libuv. This does not build properly with libuv so it is
not a dependency. However, configure will look for libuv on the system
and try to use it if found, thus breaking the build.
- Add variants for various common build flags, including support for both versions of the Racket VM environment.
- Prevent `-j` flags to `make`, which has been known to cause problems with Racket builds.
- Prefer the minimal release to improve install times. Bells and whistles carry their own runtime dependencies and should be installed via `raco`. An enterprising user may even create a `RacketPackage` class to make spack aware of `raco` installed packages.
- Match the official version numbering scheme.
- Update to version 1.2.12.
- Mark older versions as deprecated because they have security bugs.
- mfem: Update list of system library directories
- zlib patch: cc patch
Co-authored-by: Harmen Stoppels <harmenstoppels@gmail.com>
Update "spack external find --all" to also find library-only packages.
A Package can add a ".libraries" attribute, which is a list of regular
expressions to use to find libraries associated with the Package.
"spack external find --all" will search LD_LIBRARY_PATH for potential
libraries.
This PR adds examples for NCCL, RCCL, and hipblas packages. These
examples specify the suffix ".so" for the regular expressions used
to find libraries, so generally are only useful for detecting library
packages on Linux.
Do not prompt user with checksum warning when using git commit hashes
as versions. Spack was incorrectly reporting this as a potential
problem: it would display a prompt asking the user whether they
want to proceed if Spack was running in a terminal, or it would
terminate the running instance of Spack if running as part of a
script.
* rocm-cmake: remove ldconfig variant
The packages built for `rocm-cmake~ldconfig` and `rocm-cmake+ldconfig`
are identical, so the variant is unnecessary.
The `ROCM_DISABLE_LDCONFIG` option changes how `rocm_create_package`
generates DEB and RPM packages with CPack. rocm-cmake itself uses
`rocm_create_package`, however, this option is has no effect because
Spack does not build the CPack packages. It is also unnecessary on
rocm-cmake, because rocm-cmake does not contain any shared libraries
for ldconfig to configure. The rocm-cmake package is purely composed
of CMake scripts.
* Tighten CMake version dependency
* Improve package description
* Add pl2bat to PATH: Windows on Perl requires the script pl2bat.bat
and Perl to be available to the installer via the PATH. The build
and dependent environments of Perl on Windows have the install
prefix bin added to the PATH.
* symlink with win32file module instead of using Executable to
call mklink (mklink is a shell function and so is not accessible
in this manner).
* py-marshmallow: Add new package
* Modify py-packaging dependency type
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Add run dependency to py-packaging
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
We've previously generated CI pipelines for PRs, and they rebuild any packages that don't have
a binary in an existing build cache. The assumption we were making was that ALL prior merged
builds would be in cache, but due to the way we do security in the pipeline, they aren't. `develop`
pipelines can take a while to catch up with the latest PRs, and while it does that, there may be a
bunch of redundant builds on PRs that duplicate things being rebuilt on `develop`. Until we can
do better caching of PR builds, we'll have this problem.
We can do better in PRs, though, by *only* rebuilding things in the CI environment that are actually
touched by the PR. This change computes exactly what packages are changed by a PR branch and
*only* includes those packages' dependents and dependencies in the generated pipeline. Other
as-yet unbuilt packages are pruned from CI for the PR.
For `develop` pipelines, we still want to build everything to ensure that the stack works, and to ensure
that `develop` catches up with PRs. This is especially true since we do not do rebuilds for *every* commit
on `develop` -- just the most recent one after each `develop` pipeline finishes. Since we skip around,
we may end up missing builds unless we ensure that we rebuild everything.
We differentiate between `develop` and PR pipelines in `.gitlab-ci.yml` by setting
`SPACK_PRUNE_UNTOUCHED` for PRs. `develop` will still have the old behavior.
- [x] Add `SPACK_PRUNE_UNTOUCHED` variable to `spack ci`
- [x] Refactor `spack pkg` command by moving historical package checking logic to `spack.repo`
- [x] Implement pruning logic in `spack ci` to remove untouched packages
- [x] add tests
* py-pysimdjson: Add new package
* Cleanup
* Fix python requirement
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* libtiff: add missing dependencies
- gl
- glu
- freeglut
* Make X/GL only for Darwin/Mac
* Catch the force_autoreconf property
* add platform=darwin to the autotools deps as well
* Update var/spack/repos/builtin/packages/libtiff/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Fixes the following error on %clang@13.0.1
>> 2413 bison: error while loading shared libraries: libtextstyle.so.0: cannot open shared object file: No such file or directory
>> 2414 make[2]: *** [<builtin>: getdate.c] Error 127
VecCore's new home is on github (hashes have changed even though commit
IDs and presumably contents are the same), and it does not need any configuration
options. See discussion at https://gitlab.cern.ch/VecGeom/VecCore/-/merge_requests/1 .
Updated flecsi spackage to better support changes in control variables
in post 2.1.0 releases while also making legacy versions clearer as to
what is a tagged release and what is a rolling-ish development branch
* py-reportlab: add missing dependency on freetype
* Add missing dependencies
* Update var/spack/repos/builtin/packages/py-reportlab/package.py
Use pil virtual.
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* ExaGO: Handling of cuda architectures and amdgpu targets changed
to effectively handle multiple targets. See #28441.
* Add ROCm support to ExaGO and update ROCm support in HiOp
* ExaGO+rocm requires HiOp+rocm
* Newer versions of CMake may set HIP_CLANG_INCLUDE_PATH incorrectly:
add comments to the ExaGO/HiOp packages explaining how to address
this problem if it occurs.
* cmake: use CMAKE_INSTALL_RPATH_USE_LINK_PATH
Spack has a heuristic to add rpaths for packages it knows are required,
but it's really a heuristic, and it does not work when the dependencies
put their libraries in a different folder than `<prefix>/lib{64,}`.
CMake patches binaries after install with the "install rpaths", which by
default are provided by Spack and its heuristic through
`CMAKE_INSTALL_RPATH`.
CMake however knows better what libraries are effectively being linked
to, and has an option to include those in the install rpath too, through
`CMAKE_INSTALL_RPATH_USE_LINK_PATH`.
These two CMake options are complementary, repeated rpaths seem to be
filtered, and the "use link path" paths are appended to Spack's
heuristic "install rpath".
So, it seems like a good idea to enable "use link path" by default, so
that:
- `dlopen` by library name uses Spack's heuristic search paths
- linked libraries in non-standard locations within a prefix get an
rpath thanks to CMake.
* docs
- Use define/define_from_variant
- Remove unused "fortran_flags"
- Fix CUDA architectures when using multiple (needs semicolon not comma
separators)
- Add `when=` variant restrictions to simplify logic
Add output of build- and install-time tests to info command
Enable dependencies, variants, and versions by default (i.e., provide --no*
options; add gcc to test_info_fields to increase coverage for c_names->v_names
* New package: spiner
* Update dependencies for spiner package
* Update var/spack/repos/builtin/packages/spiner/package.py
Co-authored-by: Seth R. Johnson <johnsonsr@ornl.gov>
* Update var/spack/repos/builtin/packages/spiner/package.py
Co-authored-by: Seth R. Johnson <johnsonsr@ornl.gov>
* Remove versions that can't be installed and use ports-of-call@1.1.0
Co-authored-by: Seth R. Johnson <johnsonsr@ornl.gov>
* py-torch: fix build with fujitsu-ssl2
* fix to use fujitsu-ssl2 in py-torch v1.5.0 to v1.11.0
* fix to use fujitsu-ssl2 in py-torch v1.2.0 to v1.11.0
* Delete fj-ssl2.patch
* renamed the patches
* Rename fj-ssl2.1.5.patch to fj-ssl2_1.5.patch
* Delete fj-ssl2_1.5.patch
We shouldn't be using "remove_linked_tree" to remove the lock file,
since that function expects to receive a directory path as an
argument.
Also, as a further measure to avoid regression, this commit restores
the "ignore_errors=True" argument on linux and adds a unit test
checking that "remove_linked_tree" doesn't change file permissions
as a side effect of a failure to remove.
* Fix py-onnx-runtime recipe
* Add missing dependencies
* Update var/spack/repos/builtin/packages/py-cerberus/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update package.py
* Better fix for py-onnx-runtime
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* omegah: v10.1.0
this version is from the SCOREC fork of Omega_h
* prefix version with scorec
Co-authored-by: Seth R. Johnson <johnsonsr@ornl.gov>
Co-authored-by: Seth R. Johnson <johnsonsr@ornl.gov>
Reduces the number of stat calls to a bare minimum:
- Single pass over src prefixes
- Handle projection clashes in memory
Symlinked directories in the src prefixes are now conditionally
transformed into directories with symlinks in the dst dir. Notably
`intel-mkl`, `cuda` and `qt` has top-level symlinked directories that
previously resulted in empty directories in the view. We now avoid
cycles and possible exponential blowup by only expanding symlinks that:
- point to dirs deeper in the folder structure;
- are a fixed depth of 2.
* py-cffi: add compiler flags to fix build with clang
For %clang@13.0.1, this avoids the
```
clang-13: warning: optimization flag '-ffat-lto-objects' is not supported [-Wignored-optimization-argument]
```
warning being turned into an error, and fixes this link error:
```
build/temp.linux-x86_64-3.10/c/_cffi_backend.o: file not recognized: file format not recognized
```
* style
Currently `old_root` is computed by reading the symlink at `self.root`.
We should be more defensive in removing it by checking that it is in the
same directory as the new root. Otherwise, in the worst case, when
someone runs `spack env create --with-view=./view -d .` and `view`
already exists and is a symlink to `/`, Spack effectively runs `rm -rf /`.
`file` was used to detect Python scripts with shebangs, so that the interpreter could be changed from <python prefix> to <view path>. With this change, we detect shebangs using Python instead, so that `file` is no longer required.
The number of commit characters in patch files fetched from GitHub can change,
so we should use `full_index=1` to enforce full commit hashes (and a stable
patch `sha256`).
Similarly, URLs for branches like `master` don't give us stable patch files,
because branches are moving targets. Use specific tags or commits for those.
- [x] update all github patch URLs to use `full_index=1`
- [x] don't use `master` or other branches for patches
- [x] add an audit check and a test for `?full_index=1`
Co-authored-by: Todd Gamblin <tgamblin@llnl.gov>
Known issues reports only 2 issues, among the bugs reported on GitHub.
One of the two is also outdated, since the issue has been solved
with the new concretizer. Thus, this commit removes the section.
* This commit removes the Boost.with_default_variants to variants
that packages are precisely dependant upon. This is the first batch
of 20 packages with modified boost dependencies.
* Style fixes
* Tested bridger: works for gcc-4.9.3 and gcc-8.3.1
Commit 26ff443 made the Gitlab pipeline failing on develop
(while it was not failing in the original PR) due to errors in the
fetcher. This change preserves the new versions, but will give
some time for use to sync our tarball mirror for better reliability
* vecgeom: fix cuda arch
* vecgeom: change 'options' to 'args'
* vecgeom: add spec to locals
* vecgeom: suppress architecture specializations when cuda
- constrain samtools to version 1.13
- replace lzma dependency with xz
- add missing dependencies for libdeflate and openssl
- explicitly set LD_FLAGS for dependencies in makefile
From the release announcement: "This is a special bugfix release ahead of
schedule to address a memory leak that was happening on certain function calls
when using Cython. The memory leak consisted of a small constant amount of bytes
in certain function calls from Cython code. Although in most cases this was not
very noticeable, it was very impactful for long-running applications and certain
usage patterns. Check bpo-46347 for more information."
When you install Spack from a tarball, it will always show an exact
version for Spack itself, even when you don't download a tagged commit:
```
$ wget -q https://github.com/spack/spack/archive/refs/heads/develop.tar.gz
$ tar -xf develop.tar.gz
$ ./spack-develop/bin/spack --version
0.16.2
```
This PR sets the Spack version to `0.18.0.dev0` on develop, following [PEP440](https://github.com/spack/spack/pull/25267#issuecomment-896340234) as
suggested by Adam Stewart.
```
spack (fix/set-dev-version)$ spack --version
0.18.0.dev0 (git 0.17.1-1526-e270464ae0)
spack (fix/set-dev-version)$ mv .git .git_
spack $ spack --version
0.18.0.dev0
```
- [x] Update the release guide
- [x] Add __version__ to spack's __init__.py
- [x] Use PEP 440 canonical version strings
- [x] Make spack --version output [actual version] (git version)
Co-authored-by: Todd Gamblin <tgamblin@llnl.gov>
* rivet: fix dependency build types
If it isn't a python package, there is no good reason to change the default build type to remove link
* rivet: turn swig into build dependency
* Add tests to ensure google cloud storage urls work as mirrors
This commit adds two tests to track that GCS buckets can work as
mirrors, and can be parsed as valid URLs.
Currently, gs:// format URLs are not correctly parsed.
* Fix URL parsing for GCS buckets
This commit adds GCS bucket URLs as valid URLs.
* lower priority of package-provided urls
This change favors urls found in a scraped page over those provided by
the package from `url_for_version`. In most cases this doesn't matter,
but R specifically returns known bad URLs in some cases, and the
fallback path for a failed fetch uses `fetch_remote_versions` to find a
substitute. This fixes that problem.
fixes#29204
* consider what links actually exist in all cases
Checksum was only actually scraping when called with no versions. It
now always scrapes and then selects URLs from the set of URLs known to
exist whenever possible.
fixes#25831
* bow to the wrath of flake8
* test-fetch urls from package, prefer if successful
* Update lib/spack/spack/package.py
Co-authored-by: Seth R. Johnson <johnsonsr@ornl.gov>
* reword as suggested
* re-enable mypy specific ignore and ignore pyflakes
* remove flake8 ignore from .flake8
* address review comments
* address comments
* add sneaky missing substitute
I missed this one because we call substitute on a URL that doesn't
contain a version component. I'm not sure how that's supposed to work,
but apparently it's required by at least one mock package, so back in it
goes.
Co-authored-by: Seth R. Johnson <johnsonsr@ornl.gov>
Adds `spack external read-cray-manifest`, which reads a json file that describes a set of package DAGs. The parsed results are stored directly in the database. A user can see these installed specs with `spack find` (like any installed spec). The easiest way to use them right now as dependencies is to run `spack spec ... ^/hash-of-external-package`.
Changes include:
* `spack external read-cray-manifest --file <path/to/file>` will add all specs described in the file to Spack's installation DB and will also install described compilers to the compilers configuration (the expected format of the file is described in this PR as well including examples of the file)
* Database records now may include an "origin" (the command added in this PR registers the origin as "external-db"). In the future, it is assumed users may want to be able to treat installs registered with this command differently (e.g. they may want to uninstall all specs added with this command)
* Hash properties are now always preserved when copying specs if the source spec is concrete
* I don't think the hashes of installed-and-concrete specs should change and this was the easiest way to handle that
* also specs that are concrete preserve their `.normal` property when copied (external specs may mention compilers that are not registered, and without this change they would fail in `normalize` when calling `validate_or_raise`)
* it might be this should only be the case if the spec was installed
- [x] Improve testing
- [x] Specifically mark DB records added with this command (so that users can do something like "uninstall all packages added with `spack read-external-db`)
* This is now possible with `spack uninstall --all --origin=external-db` (this will remove all specs added from manifest files)
- [x] Strip variants that are listed in json entries but don't actually exist for the package
Co-authored-by: Harmen Stoppels <harmenstoppels@gmail.com>
* Use same cxx value as root
* Remove pointer syntax from non-pointer type in source
* Run patch function before build
* Use raw string in filter_file and merge edit function with patch
* Escape parentheses
* Use gDirectory from ROOT instead of CurrentDirectory function
This PR removes a few outdated sections from the "Basics" part of the
documentation. It also makes a few topic under the environment section
more prominent by removing an unneeded spack.yaml subsection and
promoting everything under it.
* Make boost composable
Currently Boost enables a few components through variants by default,
which means that if you want to use only what you need and no more, you
have to explicitly disable these variants, leading to concretization
errors whenever a second package explicitly needs those components.
For instance if package A only needs `+component_a` it might depend on
`boost +component_a ~component_b`. And if packge B only needs
`+component_b` it might depend on `boost ~component_a +component_b`. If
package C now depends on both A and B, this leads to unsatisfiable
variants and hence a concretization error.
However, if we default to disabling all components, package A can simply
depend on `boost +component_a` and package B on `boost +component_b` and
package C will concretize to depending on `boost +component_a
+component_b`, and whatever you install, you get the bare minimum.
* Fix style
* Added composable boost dependencies for folly
* fixing akantu merge issue
* hpctoolkit boost dependencies already defined
* Fix Styles
* Fixup style once more
* Adding isort fix
* isort one more time
* Fix for package audit issue
Co-authored-by: Harmen Stoppels <harmenstoppels@gmail.com>
Co-authored-by: Ryan O'Malley <rd.omalley@comcast.net>
Consolidate Spack's internal filepath logic to a select
few places and refactor to consistent internal useage of
os.path utilities. Creates a prefix, and a series of utilities
in the path utility module that facilitate handling paths
in a platform agnostic manner.
Convert Windows paths to posix paths internally
Prefer posixpath.join instead of os.path.join
Updated util/ directory to account for Windows integration
Co-authored-by: Stephen Crowell <stephen.crowell@khq.kitware.com>
Co-authored-by: John Parent <john.parent@kitware.com>
Module template format for windows (#23041)
* Incorporate new search location
* Add external user option
* proper doc string
* Explicit commands in getting started
* raise during chgrp on Win
recover installer changes
Notate admin privleges
Windows phase install hooks
Find external python and install ninja (#23496)
Allow external find python to find windows python and spack install ninja
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Betsy McPhail <betsy.mcphail@kitware.com>
Fixup common tests
* Remove requirement for Python 2.6
* Skip new failing test
Windows: Update url util to handle Windows paths (#27959)
* update url util to handle windows paths
* Update tests to handle fixed url handling
* canonicalize path only when the path type matches the host platform
* Skip some url tests on Windows
Co-authored-by: Omar Padron <omar.padron@kitware.com>
Use threading.TIMEOUT_MAX when available (#24246)
This value was introduced in Python 3.2. Specifying a timeout greater than
this value will raise an OverflowError.
Co-authored-by: Lou Lawrence <lou.lawrence@kitware.com>
Co-authored-by: John Parent <john.parent@kitware.com>
Co-authored-by: Betsy McPhail <betsy.mcphail@kitware.com>
Add compiler hint to the root spec for Windows
Reporters on Windows (#26038)
Reporters use Jinja2 as the templating engine, and Jinja2 indexes
templates by Unix separators, even on Windows, so search using Unix paths
on all systems.
Support patching on win via git (#25871)
Handle GRP on windows
CMake - Windows Bootstrap (#25825)
Remove hardcoded cmake compiler (#26410)
Revert breaking cmake changes
Ensure no autotools on Windows
Perl on Windows (#26612)
Python source build windows (#26313)
Reconfigure sysconf for Windows
Python2.6 compatibility
Fxixup new sbang tests for windows
Ruby support (#28287)
Add NASM support (#28319)
Add mock Ninja package for testing
* Style fixes
* Use Python's zipfile, if available
The compression libs are optional in Python. Rely on python as a
first attempt then fall back to `unzip`
MSVC's internal CMake and Ninja now detected by spack external find and added to packages.yaml
Saving progress on packaging zlib for Windows
Fixing the shared CMake flag
* Loading Intel's ifx Fortran compiler into MSVC; if there are multiple
versions of MSVC installed and detected, ifx will only be placed into
the first block written in compilers.yaml. The version number of ifx can
be detected using MSVC's version flag (instead of /QV) by using
ignore_version_errors. This commit also provides support for detection
of Intel compilers in their own compiler block by adding ifx.exe to the
fc/f77_name blocks inside intel.py
* Giving CMake a Fortran compiler argument
* Adding patch file for removing duplicated mangling header for versions 3.9.1 and older; static and shared now successfully building on Windows
* Have netlib-lapack depend on ninja@1.10
Co-authored-by: John R. Cary <cary@txcorp.com>
Co-authored-by: Jared Popelar <jpopelar@txcorp.com>
Making a default config.yaml for Windows
Small path length for build_stage
Provide more prerequisite details, mention default config.yaml
Killing an unnecessary setvars call
Replacing some lost changes, proofreading, updating windows-supported package list
Co-authored-by: John Parent <john.parent@kitware.com>
* Add 'make-installer' command for Windows
* Add '--bat' arg to env activate, env deactivate and unload commands
* An equivalent script to setup-env on linux: spack_cmd.bat. This script
has a wrapper to evaluate cd, load/unload, env activate/deactivate.(#21734)
* Add spacktivate and config editor (#22049)
* spack_cmd: will find python and spack on its own. It preferentially
tries to use python on your PATH (#22414)
* Ignore Windows python installer if found (#23134)
* Bundle git in windows installer (#23597)
* Add Windows section to Getting Started document
(#23131), (#23295), (#24240)
Co-authored-by: Stephen Crowell <stephen.crowell@kitware.com>
Co-authored-by: lou.lawrence@kitware.com <lou.lawrence@kitware.com>
Co-authored-by: Betsy McPhail <betsy.mcphail@kitware.com>
Co-authored-by: Jared Popelar <jpopelar@txcorp.com>
Co-authored-by: Ben Cowan <benc@txcorp.com>
Update Installer CI
Co-authored-by: John Parent <john.parent@kitware.com>
Made the vcvars batch script location a member variable of the msvc compiler subclass, initialized from the compiler executable path. Added a setup_custom_environment() method to the msvc subclass that sources the vcvars script, dumps the environment, and copies the relevant environment variables to the Spack environment. Added class variables to the Windows OS and MSVC compiler subclasses to enable finding the compiler executables and determining their versions.
* Fixed path and uid issues.
* Added needed import statement; kluged .exe extension.
* Got package to build. Some manual intervention necessary, including sourcing the MSVC setup script and having certain configuration parameters.
* Removed CMake executable suffix hack.
To provide Windows-compatible functionality, spack code should use
llnl.util.symlink instead of os.symlink. On non-Windows platforms
and on Windows where supported, os.symlink will still be used.
Use junctions when symlinks aren't supported on Windows (#22583)
Support islink for junctions (#24182)
Windows: Update llnl/util/filesystem
* Use '/' as path separator on Windows.
* Recognizing that Windows paths start with '<Letter>:/' instead of '/'
Co-authored-by: lou.lawrence@kitware.com <lou.lawrence@kitware.com>
Co-authored-by: John Parent <john.parent@kitware.com>
os.rename() fails on Windows if file already exists.
Create getuid utility function (#21736)
On Windows, replace os.getuid with ctypes.windll.shell32.IsUserAnAdmin().
Tests: Use getuid util function
Co-authored-by: lou.lawrence@kitware.com <lou.lawrence@kitware.com>
Co-authored-by: Betsy McPhail <betsy.mcphail@kitware.com>
1. Forwarding sys.stdin, e.g. use input_multiprocess_fd,
gives an error on Windows. Skipping for now
3. subprocess_context needs to serialize for Windows, like it does
for Mac.
Co-authored-by: lou.lawrence@kitware.com <lou.lawrence@kitware.com>
Co-authored-by: John Parent <john.parent@kitware.com>
* Snapshot of some MSVC infrastructure added during experiments a while ago. Rebasing from spack/develop.
* Added platform and OS definitions for Windows.
* Updated Windows platform file to conform to new archspec use.
* Added Windows as a platform; introduced some debugging code.
* Added type annotations.
* Fixed copyright.
* Removed print statements.
* Ensure `spack arch` returns correctly on Windows (#21428)
* Correctly identify windows as 'windows-Windows10-AMD64'
* python: allow versions with garbage suffix
Ubuntu 22.04 preview python prints version as 3.10.2+, the + causes
version parsing to fail and breaks detection.
* Add version comment
* match VALID_VERSION regex
* libiconv: compile with pic even when static build
* lmod: require shared lua
It seems to be unable to detect lua-posix when using a static lua:
```
Error: The follow lua module(s) are missing: posix
```
Re-work the checks and comparisons around commit versions, when no
commit version is involved the overhead is now in the noise, where one
is the overhead is now constant rather than linear.
develop in the version string. The versions from the HDF5 code were not
matching because 'develop-' is not part of the HDF5 version. Also, the
develop-x.x versions in spack omit the release version (third) number
because the branch spans all of the release versions.
* Update: py-cmake
Add additional dependencies as declared by the `py-cmake` repository.
Note: for either from-source or from-binary builds, this downloads
additional software via the network. We might want to propose upstream
patches to make this work on nodes without internet connection.
* Add Review Comments + Newest Version
* Add: Ninja
Preferred generator according to outputs and upstream repo logic
* Attempt to use resource() for CMake source
* [py-watchdog] switched to pypi and audited dependencies
* [py-watchdog] added version 2.1.6
* [py-watchdog] updated dependencies for old versions
* [py-watchdog] added when for variant
* [py-watchdog] added some newlines to make flake8 happy
* hsa-rocr-dev, llvm-amdgpu: change dependency libelf to elf
Change the libelf dependency to the virtual elf for two rocm packages.
This allows other packages (hpctoolkit) to combine rocm and dyninst
(with elfutils) while still being able to build rocm with libelf when
needed, eg darwin.
* add comment describing include path for libelf vs elfutils
fixes#29446
The new setup_*_environment functions have been falling back
to calling the old functions and warn the user since #11115.
This commit removes the fallback behavior and any use of:
- setup_environment
- setup_dependent_environment
in the codebase
Change the internal representation of `Spec` to allow for multiple dependencies or
dependents stemming from the same package. This change permits to represent cases
which are frequent in cross compiled environments or to bootstrap compilers.
Modifications:
- [x] Substitute `DependencyMap` with `_EdgeMap`. The main differences are that the
latter does not support direct item assignment and can be modified only through its
API. It also provides a `select_by` method to query items.
- [x] Reworked a few public APIs of `Spec` to get list of dependencies or related edges.
- [x] Added unit tests to prevent regression on #11983 and prove the synthetic construction
of specs with multiple deps from the same package.
Since #22845 went in first, this PR reuses that format and thus it should not change hashes.
The same package may be present multiple times in the list of dependencies with different
associated specs (each with its own hash).
* The new version of Wonton requires the new version of Jali
* Wonton: versions after 1.2.10 don't require boost at all
Co-authored-by: Seth R. Johnson <johnsonsr@ornl.gov>
* environment.py: allow link:run
Some users want minimal views, excluding run-type dependencies, since
those type of dependencies are covered by rpaths and the symlinked
libraries in the view aren't used anyways.
With this change, an environment like this:
```
spack:
specs: ['py-flake8']
view:
default:
root: view
link: run
```
includes python packages and python, but no link type deps of python.
* ECP-SDK/VTK-m: Update ROCm variant
VTK-m set contraint for when rocm/kokkos are available.
SDK Make ROCmPackage and propagate amdgpu_arch and rocm variant to
VTK-m.
Note: SDK has to check vtk-m@ 1.7: and :1.6 explicitly in orderer to have 1.7
be selected by default if +rocm in the SDK.
* ECP-SDK: Enable ROCm + VTK-m constraints
* Adding Panzer as Default
* Set Panzer as non-default
* Updated the conflict for Panzer.
* Updated the conflict for Panzer.
* Resolve the issue with Stratimikos and Thyra
* Fixing stk build issues.
* Fixing stk build issues.
* Adding another conflict for Thrya
* cray-libsci: only be a provider for scalapack with +mpi
If a package explicitly links the scalapack provider we might otherwise end up with different variants of libsci being linked: the explicitly linked one and the one added by the Cray compiler wrappers.
* cp2k: require cray-libsci+openmp with +openmp for consistency
otherwise we might get 2 different libsci linked: one explicitly, the other one via the Cray compiler wrappers, leading at least to segfaults during cleanup
* cp2k: depend on cray-fftw+openmp with +openmp
* hdf5: mark +fortran+shared conflict for older version
This version was only activated unintentionally by silo's conflict
statement, but `@1.8.15+shared+fortran+cxx` errors out in configure:
```
CMake Error at CMakeLists.txt:814 (message):
**** Shared FORTRAN libraries are unsupported ****
```
* silo: refine hdf5 conflicts to avoid building old version
Before this, `silo+hdf5` concretized to 1.10.7 or sometimes 1.8.15. Now
I've verified it works for the following configurations:
```
silo@4.10.2 patches=7b5a1dc,952d3c9
^ hdf5@1.10.7 api=default
silo@4.10.2 patches=7b5a1dc,952d3c9,eb2a3a0
^ hdf5@1.10.8 api=v18
silo@4.10.2 patches=7b5a1dc,952d3c9,eb2a3a0
^ hdf5@1.12.1 api=v110
silo@4.11-bsd patches=eb2a3a0
^ hdf5@1.12.1 api=v110
silo@4.11-bsd patches=eb2a3a0
^ hdf5@1.10.8 api=default
silo@4.11-bsd patches=eb2a3a0
^ hdf5@1.12.1 api=default
```
and verified that the following fail:
```
silo@4.10.2 ^hdf5@1.12.1 api=default
silo@4.11 ^hdf5 api=v18
silo@4.11-bsd ^hdf5@1.13.0 api=v12
silo@4.11-bsd ^hdf5@1.13.0 api=default
```
and have updated the constraints to match. Hdf5 no longer has to be
downgraded to work with Silo.
* silo: fix dependency conflicts
* py-h5py: shorten and add comments to py-h5py hdf5 dependencies
* e4s: remove slightly outdated hdf5 requirement
* e4s: remove excessive hdf5 variant constraints
These I think are holdovers from the old concretizer.
- `hdf5_compat` can be expressed as `+hdf5 ^hdf5@1.8`
- The extra variants on hdf5 shouldn't break conduit
- axom unnecessarily restricts hdf5 version
* conduit: restore hdf5_compat flag
New versions don't try to configure docs targets at all when the
BUILD_DOCS option is turned off. This avoids CMake warnings
when docs dependencies are not found.
Speeds up comparison on `Version` by ~2.5x, e.g.
```python
In [1]: v = spack.version.Version('1.0.0'); w = spack.version.Version('1.0.2')
In [2]: %timeit v < w
1.47 µs ± 5.59 ns per loop (mean ± std. dev. of 7 runs, 1000000 loops each)
535 ns ± 1.75 ns per loop (mean ± std. dev. of 7 runs, 1000000 loops each)
```
* Bugfix in var/spack/repos/builtin/packages/esmf/package.py
* Bug fixes in var/spack/repos/builtin/packages/esmf/package.py to build ESMF on macOS with clang+gfortran and on cray
* Add maintainer to var/spack/repos/builtin/packages/esmf/package.py
* Fix style errors
* Fix more style errors
* py-jupytext: add version 0.13.6
From da3fcc305d:
markdown-it-py v2.0 implements some internal changes, but won't affect jupytext
* py-jupytext: keep mdit-py version restricted to 1
* py-jupytext: update dependencies
* Apply suggestions from code review
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Apply suggestions from code review
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Add HiOp v0.5.4, update magma constraint
* Add v2.6.2rc1 to magma, make hiop depend on it
* Update var/spack/repos/builtin/packages/hiop/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
The 'multicore' backend always uses SMP, so reverse
the logic of the `conflict` clause. This resolves an issue
where the '+smp' default caused the 'backend' to switch
away from 'multicore' unintentionally (#29234).
fixes#29203
This PR fixes a subtle bug we have when importing
Spack packages as Python modules that can lead to
multiple module objects being created for the same
package.
It also fixes all the places in unit-tests where
"relying" on the old bug was crucial to have a new
"clean" state of the package class.
This commit reverts the GCS fetch strategy to before commit:
d759612523
The previous commit added some s3 syntax to handle connections, but
added them into the GCS fetch strategy in a way that prevents GCS from
working anymore.
* rocmcc compiler: initial commit based on aocc and clang
Co-authored-by: luker <luke.roskop@hpe.com>
Co-authored-by: Tom Scogland <scogland1@llnl.gov>
Recipes that are not actually required for LBANN or DiHydrogen to
build. These should be concretized within the same environment or
installed via PIP using the same Python that installed LBANN.
Removing these will help eliminate build time failures that are
actually associated with Python tools, not LBANN.
The status displayed in the terminal title could be wrong when doing
distributed builds. For instance, doing `spack install glib` in two
different terminals could lead to the current package being reported as
`40/29` due to the way Spack handles retrying locks.
Work around this by keeping track of the package IDs that were already
encountered to avoid counting packages twice.
* HIP: Change mesa18 dep to gl
* Mesa: Conflict with llvm-amdgpu when +llvm and swr
* Add def for suffix
* Disable llvm suffix patch.
* LLVM: Remove version suffix patches
* ECP-SDK: ParaView 5.11: required for CUDA
* Add conflict with ParaView@master
Because of the additional constraints for cuda, ParaView@master may be
selected unintentionally. Prefer older versions of ParaView without cuda
to master with cuda.
* hypre: Add releases 2.21.0 and 2.22.0
* Revert "hypre: Add releases 2.21.0 and 2.22.0"
This reverts commit 8921cdb3ac.
* Address external linkage failures in elfutils 0.185:
https://bugs.gentoo.org/794601https://sourceware.org/pipermail/elfutils-devel/2021q2/003862.html
Encountered while building within a Spack environment.
* Revert "Address external linkage failures in elfutils 0.185:"
This reverts commit 76b93e4504.
* paraview: The ninja generator has problems with XL and CCE
See https://gitlab.kitware.com/paraview/paraview/-/issues/21223
* paraview: Add variant to allow choice of cmake generator.
This will be necessary until problems with cmake+ninja on XL and
CCE builds can be resolved.
See https://gitlab.kitware.com/paraview/paraview/-/issues/21223
* paraview: ninja generator problems with XL/CCE
By popular preference, abandon the idea of a special variant
and select the generator based on compiler.
* Greg Becker suggested using the dedicated "generator" method to
pass the choice of makefile generator to cmake.
* paraview: The build errors I saw before with paraview%cce + ninja
have not reappeared in subsequent testing, so I'm dropping it from this
PR. If they re-occur I'll report the issue separately to KitWare.
* py-nbclassic: add 0.3.5
* Update var/spack/repos/builtin/packages/py-nbclassic/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* fix style
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Add a new test to catch exit code failure
fixes#29226
This introduces a new unit test that checks the return
code of `spack unit-test` when it is supposed to fail.
This is to prevent bugs like the one introduced in #25601
in which CI didn't catch a missing return statement.
In retrospective it seems that the shell test we have right
now all go through `tty.die` or similar code paths which
call `sys.exit(a)` explicitly. This new test instead checks
`spack unit-test` which relies on the return code from
command invocation in case of errors.
* Add 'develop' version for dmtcp
* Update var/spack/repos/builtin/packages/dmtcp/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
The `spack external find binutils` command was failing to find my system
binutils because the regex was not matching. The name of the executable
follows the string 'GNU' that I tested with three different
installations so I changed the regex to look for that. On my CentOS-7
system, the version had the RPM details so I set the version to capture
the first three parts of the version.
The system compiler on RHEL7 fails to build the latest linux-uuid.
```
util-linux-uuid@2.37.4%gcc@4.8.5 arch=linux-rhel7-haswell
```
results in:
```
libuuid/src/unparse.c:42:73: error: expected ';', ',' or ')' before 'fmt'
static void uuid_fmt(const uuid_t uuid, char *buf, char const *restrict fmt)
```
It looks like it's assuming C99 by default so there may be a better way
to handle this... but this at least works
See https://github.com/spack/spack/pull/28468/files#r809156986
If we exit before generating the:
error("Dependencies must have compatible OS's with their dependents").
...
facts we'll output a problem that is effectively
different by the one solved by clingo.
* cmd/checksum: prefer url matching url_from_version
This is a minimal change toward getting the right archive from places
like github. The heuristic is:
* if an archive url exists, take its version
* generate a url from the package with pkg.url_from_version
* if they match
* stop considering other URLs for this version
* otherwise, continue replacing the url for the version
I doubt this will always work, but it should address a variety of
versions of this bug. A good test right now is `spack checksum gh`,
which checksums macos binaries without this, and the correct source
packages with it.
fixes#15985
related to #14129
related to #13940
* add heuristics to help create as well
Since create can't rely on an existing package, this commit adds another
pair of heuristics:
1. if the current version is a specifically listed archive, don't
replace it
2. if the current url matches the result of applying
`spack.url.substitute_version(a, ver)` for any a in archive_urls,
prefer it and don't replace it
fixes#13940
* clean up style and a lingering debug import
* ok flake8, you got me
* document reference_package argument
* Update lib/spack/spack/util/web.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* try to appease sphinx
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
We can see what is in the bootstrap store with `spack find -b`, and you can clean it with `spack
clean -b`, but we can't do much else with it, and if there are bootstrap issues they can be hard to
debug.
We already have `spack --mock`, which allows you to swap in the mock packages from the command
line. This PR introduces `spack -b` / `spack --bootstrap`, which runs all of spack with
`ensure_bootstrap_configuration()` set. This means that you can run `spack -b find`, `spack -b
install`, `spack -b spec`, etc. to see what *would* happen with bootstrap configuration, to remove
specific bootstrap packages, etc. This will hopefully make developers' lives easier as they deal
with bootstrap packages.
This PR also uses a `nullcontext` context manager. `nullcontext` has been implemented in several
other places in Spack, and this PR consolidates them to `llnl.util.lang`, with a note that we can
delete the function if we ever reqyire a new enough Python.
- [x] introduce `spack --bootstrap` option
- [x] consolidated all `nullcontext` usages to `llnl.util.lang`
* py-imageio: add 2.16.0
* Update var/spack/repos/builtin/packages/py-imageio/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Some "concrete" versions on the command line, e.g. `qt@5` are really
meant to satisfy some actual concrete version from a package. We should
only assume the user is introducing a new, unknown version on the CLI
if we, well, don't know of any version that satisfies the user's
request. So, if we know about `5.11.1` and `5.11.3` and they ask for
`5.11.2`, we'd ask the solver to consider `5.11.2` as a solution. If
they just ask for `5`, though, `5.11.1` or `5.11.3` are fine solutions,
as they satisfy `@5`, so use them.
Co-authored-by: Harmen Stoppels <harmenstoppels@gmail.com>
* geant4-data: use build+run-only depends
* geant4: point to dependent datadir
This is "used" in the configure step to set up the Geant4Config.cmake
file's persistent pointers to the data directory, but the dependency
is still listed as "run" -- though I'm not sure this is the right behavior
since the geant4 installation really does change as a function of the
data directory, and the installation is incomplete/erroneous
without using one.
* Style
* trilinos: disable dl on macOS
* py-sphinx-argparse: add explicit poetry dependency
* libzmq: fix libbsd dependency
libbsd is *always* required when +libbsd (introduced in #28503) . #20893
had previously removed the macos dependency because libbsd wasn't always
enabled. Libbsd support is only available after 4.3.2 so change it to a
conflict rather than bumping the dependency.
* hdf5: work around GCC11.2 monterey fortran bug
* go-bootstrap: mark conflict for monterey
* py-tensorflow: add versions 2.5.0 and 2.6.0
- add version 2.5.0
- add version 2.6.0
- add patches for newer protobuf
- set constraints
* Remove import os. left over from testing
* Remove unused patch file
* Update var/spack/repos/builtin/packages/py-tensorflow/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-tensorflow/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-tensorflow/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-tensorflow/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-tensorflow/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-tensorflow/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Add py-clang dependency
* Adjust py-clang constraint
* Build tensorflow with tensorboard
- tensorflow
- added 2.6.1 and 2.6.2 versions
- tensorboard
- have bazel use number of jobs set by spack
- add versions and constraints
- new package: py-tensorboard-data-server
- use wheel for py-tensorboard-plugin-wit
This package can not build with newer versions of bazel that are
needed for newer versions of py-tensorboard.
* Update var/spack/repos/builtin/packages/py-clang/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Remove empty line at end of file
* Fix import sorting
* Adjust python dependencies on py-clang
* Add version 2.7.0 of pt-tensorflow and py-tensorboard
* Adjust bazel constraints
* bazel-4 support begins with py-tensorflow-2.7.0
* Adjust dependencies
* Loosen cuda constraint on versions > 2.5
Tensorflow-2.5 and above can use cuda up to version 11.4.
* Add constraints to patch
The 0008-Fix-protobuf-errors-when-using-system-protobuf.patch patch
should only apply to versions 2.5 and above.
* Adjust constraints
- versions 2.4 and below need protobuf-3.12 and below
- versions 2.4 and above can use up to cuda-11.4
- versions 2.2 and below can not use cudnn-8
- the null_linker_bin patch should only be applied to versions 2.5 and
above.
* Update var/spack/repos/builtin/packages/py-tensorflow/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-tensorflow/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Fix py-grpcio dependency for version 2.7
Also, make sure py-h5py mpi specs are consistent.
* Add llvm as run dependency.
* Fix python spec for py-tensorboard
* Fix py-google-auth spec for py-tensorboard
* Do not override the pip spec for tensorboard-plugin-wit
* Converted py-tensorboard-plugin-wit to wheel only package
* Fix bazel dependency spec in tensorflow
* Adjust pip masks
- allow tensorboard to be specified in pip constraints
- mask tensorflow-estimator
* Remove blank line at end of file
* Adjust pip constraints in setup.py
Also, adjust constraint on a patch that is fixed in 2.7
* Fix flake8 error
Adjust formatting for consistency.
* Get bazel dep right
* Fix old cudnn dependency, caught in audit test
* Adjust the regex to ensure proper line is changed
* Add py-libclang package
- Stripped the py-clang package down to just version 5
- added comments to indicate the purpose of py-clang and that
py-libclang should be preferred
- set dependencies accordingly in py-tensorflow
* Remove cap on py-h5py dependency for v2.7
* Add TODO entries for tensorflow-io-gcs-filesystem
* Edit some comments
* Add phases and select python in PATH for tensorboard-data-server
* py-libclang
- remove py-wheel dependency
- remove raw string notation in filter_file
* py-tensorboard-data-server
- remove py-wheel dep
- remove py-pip dep
- use python from package class
* py-tensorboard-plugin-wit
- switch to PythonPackage
- add version 1.8.1
- remove unneeded code
* Add comment as to why a wheel is need for tensorboard-plugin-wit
* remove which pip from tensorboard-data-server
* Fix dependency specs in tensorboard
* tweak dependencies for tensorflow
* fix python constraint
* Use llvm libs property
* py-tensorboard-data-server
- merge build into install
- use std_pip_args
* remove py-clang dependency
* remove my edits to py-tensorboard-plugin-wit
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
See https://github.com/spack/spack/issues/25353#issuecomment-1041868116
This commit changes the default behavior of
```
$ spack external find
```
from searching all the possible packages Spack knows about to
search only for the ones tagged as being a "build-tool".
It also introduces a `--all` option to restore the old behavior.
Prefer `sw_vers` to `platform.mac_ver`. In anaconda3 installation, for example, the latter reports 10.16 on Monterey -- I think this is affected by how and where the python instance was built.
Use MACOSX_DEPLOYMENT_TARGET if present to override the operating system choice.
It will be useful for metrics gathering and possibly debugging to
have this environment variable available in the runner pods that
do the actual rebuilds.
Since Spack does not install external packages, this commit skips them by
default when running stand-alone tests. The assumption is that such packages
have likely undergone an acceptance test process.
However, the tests can be run against installed externals using
```
% spack test run --externals ...
```
fixes#28260
Since we iterate over different variants from many packages, the variant
values may have types which are not comparable, which causes errors
at runtime. This is not a real issue though, since we don't need the facts
to be ordered. Thus, to avoid needless sorting, the sorted function has
been removed and a comment has been added to tip any developer that
might need to inspect these clauses for debugging to add back sorting
on the first two items only.
It's kind of difficult to add a test for this, since the error depends on
whether Python sorting algorithm ever needs to compare the third
value of a tuple being ordered.
* extensions: allow multiple "extends" directives
This will allow multiple extends directives in a package as long as only one of
them is selected as a dependency in the concrete spec.
* document the option to have multiple extends
Reuse previously was a very invasive change that required parameters to be added to all
the methods that called `concretize()` on a `Spec` object. With the addition of
concretizer configuration, we can use the config system to simplify this argument
passing and keep the code cleaner.
We decided that concretizer config options should be read at `Solver` instantiation
time, and if config changes between instnatiation of a particular solver and
`solve()` invocation, the `Solver` should use the settings from `__init__()`.
- [x] remove `reuse` keyword argument from most concretize functions
- [x] refactor usages to use `spack.config.override("concretizer:reuse", True)`
- [x] rework argument passing in `Solver` so that parameters are set from config
at instantiation time
`--reuse` was previously handled individually by each command that
needed it. We are growing more concretization options, and they'll
need their own section for commands that support them.
Now there are two concretization options:
* `--reuse`: Attempt to reuse packages from installs and buildcaches.
* `--fresh`: Opposite of reuse -- traditional spack install.
To handle thes, this PR adds a `ConfigSetAction` for `argparse`, so
that you can write argparse code like this:
```
subgroup.add_argument(
'--reuse', action=ConfigSetAction, dest="concretizer:reuse",
const=True, default=None,
help='reuse installed dependencies/buildcaches when possible'
)
```
With this, you don't need to add logic to pull the argument out and
handle it; the `ConfigSetAction` just does it for you. This can probably
be used to clean up some other commands later, as well.
Code that was previously passing `reuse=True` around everywhere has
been refactored to use config, and config is set from the CLI using
a new `add_concretizer_args()` function in `spack.cmd.common.arguments`.
- [x] Add `ConfigSetAction` to simplify concretizer config on the CLI
- [x] Refactor code so that it does not pass `reuse=True` to every function.
- [x] Refactor commands to use `add_concretizer_args()` and to pass
concretizer config using the config system.
Config scopes were different for `config` and `mutable_config`,
and `mutable_config` did not have a command line scope.
- [x] Fix by consolidating the creation logic for the two fixtures.
The concretizer is going to grow to have many more configuration,
and we really need some structured config for that.
* We have the `config:concretizer` option that chooses the solver,
but extending that is awkward (we'd need to replace a string with
a `dict`) and the solver choice will be deprecated eventually.
* We have the `concretization` option in environments, but it's
not a top-level config section -- it's just for environments,
and it also only admits a string right now.
To avoid overlapping with either of these and to allow the most
extensibility in the future, this adds a new `concretizer` config
section that can be used in and outside of environments. There
is only one option right now: `reuse`. This can expand to include
other options later.
Likely, we will soon deprecate `config:concretizer` and warn when
the user doesn't use `clingo`, and we will eventually (sometime later)
move the `together` / `separately` options from `concretization` into
the top-level `concretizer` section.
This commit just adds the new section and schema. Fully wiring it
up is TBD.
The solver has a lot of configuration associated with it. Rather
than adding arguments to everything, we should encapsulate that
in a class. This is the start of that work; it replaces `solve()`
and its kwargs with a class and properties.
* Add 'stable' to the list of infinity version names.
Rename libunwind 1.5-head to 1.5-stable.
* Add stable to the infinite version list in packaging_guide.rst.
* py-etelemetry: add 0.3.0
* Update var/spack/repos/builtin/packages/py-etelemetry/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
No version of py-nbconvert@5: can be concretized due to conflicting versions
of flit-core that are required. This issue could be solved by separate
concretization of build deps.
* archspec: remove pyproject.toml to workaround PEP517
If pyproject.toml is in the folder, that is preferred to the
setup.py packaged by poetry itself. Adding a dependency on
poetry for deploying a pure Python package seems wasteful,
since the package to be deployed just needs to be copied in
place, so we don't want to built rust for that.
* archspec: patch pyproject.toml to comply to PEP517
See https://python-poetry.org/docs/pyproject/#poetry-and-pep-517
* Fix style issues
The new HDF5 version 1.12 API causes compiler errors due to modified function prototypes. Note that version 1.11 is the development version of HDF5 1.12.
* py-numba: add 0.55.1
* Remove comment
* Pin down py-llvmlite version for older py-numba releases
* Remove py-llvmlite deps for releases not in spack
* Set upper bounds for python and py-numpy
* Add stricter upper bound to py-numpy for releases <=0.47
Setting Spack's `$prefix` to `$DESTDIR` and not to `$PREFIX` install the
package in `$prefix/usr/local` and not in `$prefix`, thus when it is
loaded the executable `direnv` in not "seen" by the environment.
* Added support to LBANN, Hydrogen, DiHydrogen, and Aluminum to capture
a gcc-toolchain cxxflags argument and pass it to a CMAKE_CUDA_FLAG
argument when set. This helps deal with compiling with clang on
systems with old base gcc installations.
* Added a dependency on py-scipy when enabling tests on LBANN.
* Updated the C++ standard for Hydrogen to C++17.
* Added a new variant +apps to enable (or disable) python packages that
are used by applications in the LBANN repo, but are not strictly
required for building and using LBANN.
* Added a run time dependency for both py-pytest and py-scipy so that
they are activated in any environment.
* Added support for building LBANN, Hydrogen, and DiHydrogen with the
IBM ESSL BLAS library. This requires explicit identification of
additional LAPACK libraries, since ESSL does not implement LAPACK, but
is found by CMake.
* Fixed a bug in the LBANN dependency on OpenCV for Power architectures.
The +powerpc variant is only required for GCC toolchains and causes
Clang to break. Switched to only enabling when using %gcc on power.
- Installation often hangs building the documentation. This happens when
doxygen and latex are found. To avoid the issue, comment-out that part
of the code until an explicit cmake variable to disable documentation
generation is available.
* sundials: fix smoke tests
* sundials: add new version
* use cmake+make instead of make for tests, fix style
* use cmake_bin workaround from https://github.com/spack/spack/pull/28622
Note that the SDK is not the same as the system version: using
apple-clang@13 is a better match than `os=monterey` since this actually
fails on bigsur as well, as long as xcode 13 is being used.
* core: Make platform environment an instance not class method
In preparation for accessing data constructed in __init__.
* macos: set consistent macosx deployment target
This should silence numerous warnings from mixed gcc/macos toolchains.
* perl: prevent too-new deployment target version
```
*** Unexpected MACOSX_DEPLOYMENT_TARGET=11
***
*** Please either set it to a valid macOS version number (e.g., 10.15) or to empty.
```
* Stylin'
* Add deployment target overrides to failing autoconf packages
* Move configure workaround to base autoconf package
This reverts commit 3c119eaf8b4fb37c943d503beacf5ad2aa513d4c.
* Stylin'
* macos: add utility functions for SDK
These aren't yet used but should probably be added to spack debug
report.
* Remove node_target_satisfies/3 in favor of target_satisfies/2
When emitting input facts we don't need to couple target with
packages, but we can emit fewer facts independently and let
the grounder combine them.
* Remove compiler_version_satisfies/4 in favor of compiler_version_satisfies/3
When emitting input facts we don't need to couple compilers with
packages, but we can emit fewer facts independently and let
the grounder combine them.
* Introduce heuristic in the ASP-program
With heuristic we can drive clingo to make better
initial guesses, which lead to fewer choices and
conflicts in the overall solve
This improves the stand-alone tests for slate by providing most
of the dependencies to the test framework and enabling stand-alone
tests on all versions except the oldest.
* AMReX: +tiny_profile
The tiny profiler options in AMReX are by default off but needed
by WarpX. Adds a new variant to control it.
* Add Erik Palmer as Co-Maintainer
... so he receives pings on updates of the package for review.
The version of the ONNX submodule was updated between the PyTorch
1.9 and 1.10 releases, which fixed builds with newer protobuf but
broke builds with older protobuf.
Also this adds minimum version reqs for numpy/typing-extensions
(which were not present before).
* gcc: revise patch range on darwin
* gcc: add conflict to work around bootstrap failure
closes#23296 . See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100340
.
```
Comparing stages 2 and 3
Bootstrap comparison failure!
gcc/tree-ssa-operands.o differs
gcc/tree-ssanames.o differs
gcc/ipa-inline.o differs
gcc/tree-ssa-pre.o differs
gcc/gimple-loop-interchange.o differs
...
```
639 total differences.
* gcc: bump conflict up to correct later version
* Fix reindex with uninstalled deps
When a prefix of a dep is removed, and the db is reindexed, it is added
through the dependent, but until now it incorrectly listed the spec as
'installed'.
There was also some questionable behavior in the db when the same spec
was added multiple times, it would always be marked installed.
* Always reserve path
* Only add installed spec's prefixes to install prefixes set
* Improve warning, and ensure ensure only ensures
* test: reindex with every file system remnant removed except for the old index; it should give a database with nothing installed, including records with installed==False,external==False,ref_count==0,explicit=True, and these should be removable from the database
* stacks: add regression tests for matrix expansion
* Use constrain semantics to construct spec lists for stacks
* Fix semantics for constraining an anonymous spec. Add tests
Since in Spack we pull binaries out of the `warpx` package, we don't
need `py-cmake` to build `py-warpx`.
Generally, `py-cmake` in `pyproject.toml` is just a mean for us to
tell `pip` to make a `cmake` CLI tool available.
* added package gptune with all its dependencies: adding py-autotune, pygmo, py-pyaml, py-autotune, py-gpy, py-lhsmdu, py-hpbandster, pagmo2, py-opentuner; modifying superlu-dist, py-scikit-optimize
* adding gptune package
* minor fix for macos spack test
* update patch for py-scikit-optimize; update test files for gptune
* fixing gptune package style error
* fixing unit tests
* a few changes reviewed in the PR
* improved gptune package.py with a few newly added/improved dependencies
* fixed a few style errors
* minor fix on package name py-pyro4
* fixing more style errors
* Update var/spack/repos/builtin/packages/py-scikit-optimize/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* resolved a few issues in the PR
* fixing file permissions
* a few minor changes
* style correction
* minor correction to jq package file
* Update var/spack/repos/builtin/packages/py-pyro4/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* fixing a few issues in the PR
* adding py-selectors34 required by py-pyro4
* improved the superlu-dist package
* improved the superlu-dist package
* moree changes to gptune and py-selectors34 based on the PR
* Update var/spack/repos/builtin/packages/py-selectors34/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* improved gptune package: 1. addressing comments of tldahlgren in PR 26936; 2. adding variant openmpi
* fixing style issue of gptune
* changing file mode
* improved gptune package: add variant mpispawn which depends on openmpi; add variant superlu and hypre for installing the drivers; modified hypre package file to add a gptune variant
* fixing style error
* corrected pddrive_spawn path in gptune test; enforcing gcc>7
* fixing style error
* setting environment variables when loading gptune
* removing debug print in hypre/package.py
* adding superlu-dist v7.2.0; fixing an issue with CMAKE_INSTALL_LIBDIR
* changing site_packages_dir to python_platlib
* not using python3.9 for py-gpy, which causes due to dropped support of tp_print
* more replacement of site_packages_dir
* fixing a few dependencies in gptune; added a gptune version
* adding url for gptune
* minor correction of gptune
* updating versions in butterflypack
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* [py-xonsh] added py-xonsh package
* [py-xonsh] change dependency to python 3.6
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Add sticky variants
* Add unit tests for sticky variants
* Add documentation for sticky variants
* Revert "Revert 19736 because conflicts are avoided by clingo by default (#26721)"
This reverts commit 33ef7d57c1.
* Add stickiness to "allow-unsupported-compiler"
- To retrieve the correct spack version we need to get it from the git
repo.
- Recommend installing the package with root for production
- Add Tomas as maintainer to sarus' spack package
- Add the option to disable unit tests in latest versions
Fixes the following build failure when building with gcc 11:
478 ../../../../CPP/7zip/Archive/Wim/WimHandler.cpp: In member function 'virtual LONG NArchive::NWim::CHandler::GetArchiveProperty(PROPID, PROPVARIANT*)':
>> 479 ../../../../CPP/7zip/Archive/Wim/WimHandler.cpp:308:11: error: use of an operand of type 'bool' in 'operator++' is forbidden in C++17
480 308 | numMethods++;
481 | ^~~~~~~~~~
>> 482 ../../../../CPP/7zip/Archive/Wim/WimHandler.cpp:318:9: error: use of an operand of type 'bool' in 'operator++' is forbidden in C++17
483 318 | numMethods++;
484 | ^~~~~~~~~~
* opencv: add new version, variant, and patch
- added version 4.5.4
- added tesseract variant
- added patch to not add system paths
* Add leptonica depends and contrib conflicts
* Add dependencies for 1394 support
- new package: libraw1394
- add sdl dependency to libdc1394
- add conflict for openjpeg and jasper
* Adjust dependencies and conflicts for opencv modules
* rewrite of opencv
- all prebuilt apps are now variants and can be installed
- core is no longer a variant. It was always built anyway so it was not
really a variant.
- contrib is no longer a variant. All of the contrib modules are now
available as variants.
- components that can not be built with Spack are no longer variants.
They are set to 'off' to prevent pulling from system.
- handle the case where a module and a component have the same name
- use `with when` framework
- adjust dependencies and conflicts
- new package: libraw1394
- have libdc1394 depend on libraw1394
- patch to find clp
- patch to find onnx
- patch for cvv to find Qt
- format with black
* Incorporate recommended changes
- fix variants and dependencies on packages that depend on opencv
- remove opencv-3.2 and patches
- add some new patches to handle different versions
- cntk needs further work
- the openvslam package was markde deprecated as it is no longer an
active project and the repository has no code
* Remove gmake dependency.
* Remove sdl support
SDL is only used in an example case, but the examples are not built.
* remove openvslam
* Remove opencv+flann variant from 3dtk
* Back out cfitsio constraint from py-astropy
* remove opencv+flann variant from dlib
* remove boost constraint from 3dtk
* Remove non-opencv related bohrium changes
* Adjustments for cntk
- protobuf constraint at version 3.10
- need specific variants for opencv
- improve patch
* Deprecate CNTK package
* variant tweaks
- added appropriate conflicts for cublas
- made cuda/cudev relationship explicit
- moved openx to pending components as it needs an openvx package
* fix isort style error
* Use date version from kaldi rather than commit
* Revert changes from a bad rebase
* Add +flann to 3dtk and dlib
* Use compression support with libtiff
* remove `+datasets` from opencv dependency
The py-torchgeo package does not need opencv+datasets.
* fix typo
zip --> zlib
* added package gptune with all its dependencies: adding py-autotune, pygmo, py-pyaml, py-autotune, py-gpy, py-lhsmdu, py-hpbandster, pagmo2, py-opentuner; modifying superlu-dist, py-scikit-optimize
* adding gptune package
* minor fix for macos spack test
* update patch for py-scikit-optimize; update test files for gptune
* fixing gptune package style error
* fixing unit tests
* a few changes reviewed in the PR
* improved gptune package.py with a few newly added/improved dependencies
* fixed a few style errors
* minor fix on package name py-pyro4
* fixing more style errors
* Update var/spack/repos/builtin/packages/py-scikit-optimize/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* resolved a few issues in the PR
* fixing file permissions
* a few minor changes
* style correction
* minor correction to jq package file
* Update var/spack/repos/builtin/packages/py-pyro4/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* fixing a few issues in the PR
* adding py-selectors34 required by py-pyro4
* improved the superlu-dist package
* improved the superlu-dist package
* moree changes to gptune and py-selectors34 based on the PR
* Update var/spack/repos/builtin/packages/py-selectors34/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* improved gptune package: 1. addressing comments of tldahlgren in PR 26936; 2. adding variant openmpi
* fixing style issue of gptune
* changing file mode
* improved gptune package: add variant mpispawn which depends on openmpi; add variant superlu and hypre for installing the drivers; modified hypre package file to add a gptune variant
* fixing style error
* corrected pddrive_spawn path in gptune test; enforcing gcc>7
* fixing style error
* setting environment variables when loading gptune
* removing debug print in hypre/package.py
* adding superlu-dist v7.2.0; fixing an issue with CMAKE_INSTALL_LIBDIR
* changing site_packages_dir to python_platlib
* not using python3.9 for py-gpy, which causes due to dropped support of tp_print
* more replacement of site_packages_dir
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* espnet first build with depends
* fixed flake8
* updated to lastest version and removed python dependency
* changed to pypi and version 2.17.2
* [py-kaldiio] depends on py-pytest-runner
* [py-kaldiio] updated copyright
Co-authored-by: Sid Pendelberry <sid@rit.edu>
* prmon: make sure integration tests do not run in parallel
Some integration tests fail if not run on an otherwise idle machine.
* prmon: run unittests based on googletest
* prmon: fix checksums
* superlu-dist: use CMakePackage helper functions
* Fix#28609
It's OK to have CUDA in the dependency tree as long as it's not being
used for superlu-cuda.
* Update prmon package to latest versions
Add recent versions of the prmon package
Add the spdlog dependency for versions >=3
Add package developers as additional maintainers
Update name of development branch to 'main'
* Correct checksum for v3.0.1
at-spi2-core is automatically selecting dbus-broker and enabling systemd if it finds dbus-broker-launch which some systems might have even without systemd being part of the actual spack environment. This is not ideal for a spack package.
ucx has the configure option --[enable|disable]-backtrace detail.
This option is not explicitely set by spack, causing problems on my system, because
./configure does not find the bfd.h header file / libbfd.so library.
Added variant + dependencies (binutils). Disabled by default
* trilinos: version 12 requires cxxstd=11
* trilinos: use cmake version 3.21 or old when trilinos version 12
* conflict cxxstd=17 and cmake@3.2.[01]
* trilinos: version 12 requires cxxstd=11.
* Trilinos_CXX11_FLAGS is set to ' ' to avoid inject C++11 flag.
* set Trilinos_CXX11_FLAGS only version 12 or older.
* trilinos: update dependencies
Use the tribits deps to clarify some dependencies, and group some together
using `with` statements, eliminating some transitive conflict duplication.
* trilinos: Restricit cuda incompatibility
* e4s: vastly reduce number of packages in trilinos-cuda build
Not clear who the customers of cuda-enabled trilinos are, or what options
they need, or which sets of options conflict...
* e4s: remove ~wrapper from trilinos+cuda
* VTK-m: Make vtk-m consistent with ROCmPackage
* VTKm: Add kokkos variant
Specifying +kokkos will enable kokkos backend.
Specifying +kokkos with +rocm will require a kokkos with a ROCm backend.
Specifying +cuda enables VTK-m native CUDA backend. VTK-m native cuda backend
is not compatible with the kokkos +cuda backend.
* VTK-m: Add cuda_native variant
Required to allow specifying a vtk-m spec the selects a
cuda_arch and predictably propagate that to the underlying kokkos
dependency.
This also makes explicit selecting kokkos with a cuda backend or using
the VTK-m cuda backend.
* Mesa(18): Use libllvm virtual package
* Mesa patch configuration
Patch Mesa to define LLVM_VERSION_SUFFIX if llvm is pre-release
* Patch llvm-config to define LLVM_VERSION_SUFFIX
* Add a new version to track development
The released versions do not properly install via cmake which leads to
errors when linking against the library. These upstream problems have
been addressed on the glm development branch.
* Move git to class level and remove redundant depends
* vecgeom: require exact version of veccore
Fixes configure error from downstream package:
```
CMake Error at /rnsdhpc/code/spack/opt/spack/apple-clang/cmake/7zgbrwt/share/cmake-3.22/Modules/CMakeFindDependencyMacro.cmake:47 (find_package):
Could not find a configuration file for package "VecCore" that is
compatible with requested version "0.8.0".
The following configuration files were considered but not accepted:
/rnsdhpc/code/spack/var/spack/environments/celeritas/.spack-env/view/lib/cmake/VecCore/VecCoreConfig.cmake, version: 0.6.0
```
* veccore: add new versions
* Add flags to cabana to enable hypre and heffte when they are part of spec. Also add googletest to build dependencies
* Fixed mixed spaced and tabs
* Update package.py
* Update package.py
* Update package.py
* Modified to request specifically heFFTe version 2.0.0 due to
limitations in heFFTe cmakefiles.
* Update var/spack/repos/builtin/packages/cabana/package.py
Co-authored-by: Christoph Junghans <christoph.junghans@gmail.com>
* Integrated more heffte and hypre versions into cabana requests
Co-authored-by: Christoph Junghans <christoph.junghans@gmail.com>
* ParaView/VTK: Constrain version for ADIOS2 patch.
Older available versions of ParaView/VTK predate
ADIODS2 support.
ParaView lower bound is 5.8 and VTK lower bound is 8.2.0
* ParaView: Gate the ADIOS2 by verison
It seems that spack reads the output of `setup_run_environment` to build the actual spack modules and lmod modules. So, any output here will used verbatim on the shell.
This patch fixes https://github.com/spack/spack/issues/26733
1. adding latest release 3.5.0
2. updating cmake requirement to match that of Kokkos
3. adding logic to depend on the right version of Kokkos by default
* Kokkos: updating package list, maintainers and minimum cmake version
* Kokkos: updating maintainers list
Updating maintainers list to have the correct GitHub handle for Jan.
`spack license update-copyright-year` was updating license headers but not the MIT
license file. Make it do that and add a test.
Also simplify the way we bump the latest copyright year so that we only need to
update it in one place.
* [kaldi] Added version 2021-11-16
* [kaldi] Added logic for new version and when cuda 11 is used
* [kaldi] Added patch file when cuda 11 as cub is now built into it
* [kaldi] removed .999 and simplified some logic
Co-authored-by: Doug Heckman <dahdco@rit.edu>
* add py-ats package
* add new 7.0.10 tag
* add myself as a maintainer
* add dependencies for python and setuptools
* style
* added todo for flux
* words
* update versions users should use
* Use pip to bootstrap pip
* Bootstrap wheel from source
* Update PythonPackage to install using pip
* Update several packages
* Add wheel as base class dep
* Build phase no longer exists
* Add py-poetry package, fix py-flit-core bootstrapping
* Fix isort build
* Clean up many more packages
* Remove unused import
* Fix unit tests
* Don't directly run setup.py
* Typo fix
* Remove unused imports
* Fix issues caught by CI
* Remove custom setup.py file handling
* Use PythonPackage for installing wheels
* Remove custom phases in PythonPackages
* Remove <phase>_args methods
* Remove unused import
* Fix various packages
* Try to test Python packages directly in CI
* Actually run the pipeline
* Fix more packages
* Fix mappings, fix packages
* Fix dep version
* Work around bug in concretizer
* Various concretization fixes
* Fix gitlab yaml, packages
* Fix typo in gitlab yaml
* Skip more packages that fail to concretize
* Fix? jupyter ecosystem concretization issues
* Solve Jupyter concretization issues
* Prevent duplicate entries in PYTHONPATH
* Skip fenics-dolfinx
* Build fewer Python packages
* Fix missing npm dep
* Specify image
* More package fixes
* Add backends for every from-source package
* Fix version arg
* Remove GitLab CI stuff, add py-installer package
* Remove test deps, re-add install_options
* Function declaration syntax fix
* More build fixes
* Update spack create template
* Update PythonPackage documentation
* Fix documentation build
* Fix unit tests
* Remove pip flag added only in newer pip
* flux: add explicit dependency on jsonschema
* Update packages that have been added since this was branched off of develop
* Move Python 2 deprecation to a separate PR
* py-neurolab: add build dep on py-setuptools
* Use wheels for pip/wheel
* Allow use of pre-installed pip for external Python
* pip -> python -m pip
* Use python -m pip for all packages
* Fix py-wrapt
* Add both platlib and purelib to PYTHONPATH
* py-pyyaml: setuptools is needed for all versions
* py-pyyaml: link flags aren't needed
* Appease spack audit packages
* Some build backend is required for all versions, distutils -> setuptools
* Correctly handle different setup.py filename
* Use wheels for py-tomli to avoid circular dep on py-flit-core
* Fix busco installation procedure
* Clarify things in spack create template
* Test other Python build backends
* Undo changes to busco
* Various fixes
* Don't test other backends
* Add new package to spack. survey is a lightweight application performance tool that also gathers system information and stores it as metadata.
* Add maintainer and note about source access.
* Update the man path per spack reviewer suggestion.
* Remove redundant settings for PYTHONPATH, PATH, and MANPATH.
* Move to a one mpi collector approach for cce/tce integration.
* Add pyyaml dependency
* Make further spack reviewer changes to python type specs, mpi args, build type variant.
* Add reviewer requested changes.
* Add reviewer docstring requested changes.
* Add more updates from spack reviewer comments.
* Update the versions to use tags, not branches
* Redo dashes to fix issue with spack testing.
Co-authored-by: Jim Galarowicz <jgalarowicz@newmexicoconsortium.org>
When `spack compiler list` is run without being restricted to a
particular scope, and no compilers are found, say that none are
available, and hint that the use should run spack compiler find to
auto detect compilers.
* Improve docs
* Check if stdin is a tty
* add a test
Backport a patch for v1.3.4 that fixes an unsigned typedef problem
on macOS: https://github.com/xiph/ogg/pull/64
Also add v1.3.5 that has this issue fixed.
spack paths can be long and this overflows (at least) these buffers
inside of the bundled T1lib inside of the grace distribution, leading
to crashes on startup.
Charm++ versions below 7.0.0 have build issues on macOS, mainly due to the
pre-7.0.0 `VERSION` file conflicting with other version files on the
system: https://github.com/UIUC-PPL/charm/issues/2844. Specifically, it
conflicts with LLVM's `<version>` header that was added in llvm@7.0.0 to
comply with the C++20 standard:
https://en.cppreference.com/w/cpp/header/version. The conflict only occurs
on case-insensitive file systems, as typically used on macOS machines.
Many packages implement logic at the class level to handle complex dependencies and
conflicts. Others have started using `with when("@1.0"):` blocks since we added that
capability. The loops and other control logic can cause some pure directive logic not to
be removed by our package hashing logic -- and in many cases that's a lot of code that
will cause unnecessary rebuilds.
This commit changes the unparser so that it will descend into these blocks. Specifically:
1. Descend into loops, if statements, and with blocks at the class level.
2. Don't look inside function definitions (in or outside a class).
3. Don't look at nested class definitions (they don't have directives)
4. Add logic to *remove* empty loops/with blocks/if statements if all directives
in them were removed.
This allows our package hash to ignore a lot of pure metadata that it was not ignoring
before, and makes it less sensitive.
In addition, we add `maintainers` and `tags` to the list of metadata attributes that
Spack should remove from packages when constructing canonoical source for a package
hash.
- [x] Make unparser handle if/for/while/with at class level.
- [x] Add tests for control logic removal.
- [x] Add a test to ensure that all packages are not only unparseable, but also
that their canonical source is still compilable. This is a test for
our control logic removal.
- [x] Add another unparse test package that has complex logic.
These are the unit tests from astunparse, converted to pytest, with a few backports from
upstream cpython. These should hopefully keep `unparser.py` well covered as we change it.
We can't tell `print(a, b, c)` and `print((a, b, c))` apart -- both of these expressions
generate different ASTs in Python 2 and Python 3. However, we can decide that we don't
care. This commit treats both of them the same when `py_ver_consistent` is set with
`unparse()`.
This means that the package hash won't notice changes from printing a tuple to printing
multiple values, but we don't care, because this is extremely unlikely to affect the build.
More than likely this is just an error message for the user of the package.
- [x] treat `print(a, b, c)` and `print((a, b, c))` the same in py2 and py3
- [x] add another package parsing test -- legion -- that exercises this feature
To make it easier to see how package hashes change and how they are computed, add two
commands:
* `spack pkg source <spec>`: dumps source code for a package to the terminal
* `spack pkg source --canonical <spec>`: dumps canonicalized source code for a
package to the terminal. It strips comments, directives, and known-unused
multimethods from the package. It is used to generate package hashes.
* `spack pkg hash <spec>`: This gives the package hash for a particular spec.
It is generated from the canonical source code for the spec.
- [x] `add spack pkg source` and `spack pkg hash`
- [x] add tests
- [x] fix bug in multimethod resolution with boolean `@when` values
Co-authored-by: Greg Becker <becker33@llnl.gov>
We are planning to switch to using full hashes for Spack specs, which means that the
package hash will be included in the deployment descriptor. This means we need a more
robust package hash than simply dumping the `repr` of the AST.
The AST repr that we previously used for package content is unreliable because it can
vary between python versions (Python's AST actually changes fairly frequently).
- [x] change `package_hash`, `package_ast`, and `canonical_source` to accept a string for
alternate source instead of a filename.
- [x] consolidate package hash tests in `test/util/package_hash.py`.
- [x] remove old `package_content` method.
- [x] make `package_hash` do what `canonical_source_hash` was doing before.
- [x] modify `content_hash` in `package.py` to use the new `package_hash` function.
Co-authored-by: Danny McClanahan <1305167+cosmicexplorer@users.noreply.github.com>
Our package hash is supposed to be consistent from python version to python version.
Test this by adding some known unparse inputs and ensuring that they always have the
same canonical hash. This test relies on the fact that we run Spack's unit tests
across many python versions. We can't compute for several python versions within the
same test run so we precompute the hashes and check them in CI.
Package hashing was not properly handling multimethods. In particular, it was removing
any functions that had decorators from the output, so we'd miss things like
`@run_after("install")`, etc.
There were also problems with handling multiple `@when`'s in a single file, and with
handling `@when` functions that *had* to be evaluated dynamically.
- [x] Rework static `@when` resolution for package hash
- [x] Ensure that functions with decorators are not removed from output
- [x] Add tests for many different @when scenarios (multiple @when's,
combining with other decorators, default/no default, etc.)
Co-authored-by: Danny McClanahan <1305167+cosmicexplorer@users.noreply.github.com>
Previously we used `directives.__all__` to get directive names, but it wasn't
quite right -- it included `DirectiveMeta`, etc. It's not wrong, but it's also
not the clearest way to do this.
- [x] Refactor `@directive` to track names in `directive_names` global
- [x] Rename `_directive_names` to `_directive_dict_names` in `DirectiveMeta`
- [x] Add a test for `RemoveDirectives`
Co-authored-by: Danny McClanahan <1305167+cosmicexplorer@users.noreply.github.com>
Some packages use top-level unassigned strings instead of comments, either just after a
docstring on in the body somewhere else. Ignore those strings becasue they have no
effect on package behavior.
- [x] adjust RemoveDocstrings to remove all free-standing strings.
- [x] move tests for util/package_hash.py to test/util/package_hash.py
Co-authored-by: Danny McClanahan <1305167+cosmicexplorer@users.noreply.github.com>
Python 2 and 3 represent string literals differently in the AST. Python 2 requires '\x'
literals, and Python 3 source is always unicode, and allows unicode to be written
directly. These also unparse differently by default.
- [x] modify unparser to write both out the way `repr` would in Python 2 when
`py_ver_consistent` is provided.
Backport operator precedence algorithm from here:
397b96f6d7
This eliminates unnecessary parentheses from our unparsed output and makes Spack's unparser
consistent with the one in upstream Python 3.9+, with one exception.
Our parser normalizes argument order when `py_ver_consistent` is set, so that star arguments
in function calls come last. We have to do this because Python 2's AST doesn't have information
about their actual order.
If we ever support only Python 3.9 and higher, we can easily switch over to `ast.unparse`, as
the unparsing is consistent except for this detail (modulo future changes to `ast.unparse`)
Previously, there were differences in the unparsed code for Python 2.7 and for 3.5-3.10.
This makes unparsed code the same across these Python versions by:
1. Ensuring there are no spaces between unary operators and
their operands.
2. Ensuring that *args and **kwargs are always the last arguments,
regardless of the python version.
3. Always unparsing print as a function.
4. Not putting an extra comma after Python 2 class definitions.
Without these changes, the same source can generate different code for different
Python versions, depending on subtle AST differences.
One place where single source will generate an inconsistent AST is with
multi-argument print statements, e.g.:
```
print("foo", "bar", "baz")
```
In Python 2, this prints a tuple; in Python 3, it is the print function with
multiple arguments. Use `from __future__ import print_function` to avoid
this inconsistency.
Add `astunparse` as `spack_astunparse`. This library unparses Python ASTs and we're
adding it under our own name so that we can make modifications to it.
Ultimately this will be used to make `package_hash` consistent across Python versions.
Add an abstraction around libllvm to allow libllvm
providers to be specified for all packages.
This is targeting allowing mesa to build against
llvm-amdgpu or intel-llvm or llvm or any other
custom llvm variant that arises for specific GPU
toolchains
* Python: set default config_vars
* Add missing commas
* dso_suffix not present for some reason
* Remove use of default_site_packages_dir
* Use config_vars during bootstrapping too
* Catch more errors
* Fix unit tests
* Catch more errors
* Update docstring
* Update existing 2020.0 version to use tag
* Add versions 2018.2 and master
* Add patches for GCC/Intel
* Use MPI compiler wrappers when +mpi
* Constrain CMake build dependency (need >= 3.1)
* Add variants for optional components (e.g QFIT library)
./configure tries to execute an MPI test, which is not possible on
most HPC platforms (if you don't build on a compute node), so this
check is disabled to allow the build to proceed. Ideally we could
check this by placing constraints on the MPI that Spack builds (e.g.
require building a version that is guaranteed to have threading
support).
* rocm recipes updates for 4.5.0
* update to rocm recipes for 4.5.0 release
* updates to the rocm recipes for rocm-4.5.0 release
* fix style errors
* update to rocm-validation-suite for rocm-4.5.0 release
* bump up rccl recipe for rocm-4.5.0
* bump up version for rdc for rocm-4.5.0
* update miopengemm, miopen-opencl,rocm-opencl recipes for 4.5.0 release
* bump up version for mivisiox for rocm-4.5.0 release
* update the rocm-validation-suite recipe
* no need to change the perl path for 4.5.0
* fix the build failure with the recent change made for hip package
* modify checksum for the llvm-amdgpu for 4.5.0
* fix the build issue aftere recent changes made for enabling test
* fix the build issue with 4.5.0
* add new recipe for hipsolver
* address review comments
* llvm: make targets a multivalued variant
* Fix the targets variant values
1. Make them lowercase and add a mapping to cmake equivalent
2. auto -> all
2. Restore composability by using a multivalued variant, so that
`targets=all` and `targets=x86` is combined to `targets=all,x86`
which is then transformed into LLVM_TARGETS_TO_BUILD=all.
* use targets=x86 in iwyu
* Default to nvptx/amdgpu/host arch targets
* default to none
* Update var/spack/repos/builtin/packages/zig/package.py
This reports the kernel version (vs. the distro version) on Linux and
returns a valid Version (stripping characters like '+' which may be
present for custom-built kernels).
Reading appdirs.py without explicitly requesting UTF-8 decoding results
in the build process to fail for Python 3.6.
See https://github.com/ActiveState/appdirs/pull/152 for the upstream
fix.
* snakemake: New version
The newer versions of snakemake have a lot of new dependencies. The
optional dependencies still have to be added.
* removed comment
* some changes
* added reports variant
* deprecate older version and add me as maintainer
* Added dependency py-ratelimiter
* Fix: py-adios Cython run
Always run Cython before `py-adios` installs.
This makes sure the `.cpp` files from `.pyx` files are freshly
created and work with newer CPython versions than the one checked
in.
* Cleanup: `rm` -> `os.remove`
* Drop preferred hdf5 version
* Fix conduit
* Add compat bound for silo on hdf5
* Update var/spack/repos/builtin/packages/conduit/package.py
Co-authored-by: Axel Huebl <axel.huebl@plasma.ninja>
* hdf5 <= 1.10 for conduit <= 0.7
Co-authored-by: Axel Huebl <axel.huebl@plasma.ninja>
Doxygen's build system uses CMake's deprecated `FindPythonInterp`,
which can get confused by other `python` executables in the PATH.
See issue: https://github.com/spack/spack/issues/28215
Patch to add --embed flag to config-python when interface=python and
using python@3.8:
This is because python@3.8 changed behavior of python-config --ldflags
(and --libs) such that it no longer includes -lpython unless --embed
flag is used.
See e.g. https://github.com/mesonbuild/meson/issues/5629
* [py-aiohttp] added new version
* [py-aiohttp] changed dependency on setuptools
* [py-aiohttp] fixed some of the dependencies
* [py-aiohttp] updated dependency to py-typing-extensions
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* New package: py-azure-storage-blob
* fixed typo
* Update var/spack/repos/builtin/packages/py-azure-storage-blob/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-azure-storage-blob/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-azure-storage-blob/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* libtiff: fix build on macOS Monterey
* patch configure, not configure.ac
* Revert "patch configure, not configure.ac"
This reverts commit 8bf315cb22.
* Force Spack to run autoreconf using new patch
* [py-aiohttp] added new version
* [py-aiohttp] updated py-setuptools version dependency
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
For versions of aws-parallelcluster >= 2.9, the pyyaml dependency had to be >= 5.3.1 and == 5.1.2
at the same time making impossible to install ParallelCluster >= 2.9 from spack repository.
See issue: https://github.com/spack/spack/issues/28172
Fixed by limiting pyyaml 5.1.2 version to aws-parallelcluster < 2.8, according to this commit:
7255d314b7
Tested with a manual installation of aws-parallelcluster@2.11.4
Add a new check to `spack audit` to scan and verify that version constraints may be satisfied
Modifications:
- [x] Add a new check to `spack audit` to scan and verify that version constraints may be satisfied by some version declared in the built-in repository
- [x] Fix issues found by CI
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* py-datrie: New package, initial commit
* removed boilerplate
* Update var/spack/repos/builtin/packages/py-datrie/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-datrie/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* trilinos: fix define_tpl to handle depspecs w/out headers
This should address #27758 (i.e. errors due to netlib-scalapack not
having headers)
* trilinos: This fixes a mismatch in variant name and spec name for x11/libx11
* [py-minio] Added py-minio package
* [py-minio] added missing dependencies for py-minio
* [py-minio] added type=('build', 'run') in dependencies
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* [py-dh-scikit-optimize] Added new versions
* [py-dh-scikit-optimize] fixing dependencies
* making py-configspace a required dependency of py-dh-scikit-learn
* r-hdf5r: use pkg-config to find hdf5
Since hdf5 was switched from autotools to cmake, the hdf5 compiler
wrappers can not be used to find and configure hdf5. This PR switches to
using pkg-config for configuration.
* Add comment about configure patch
* The Class F problem has been added to seven of the benchmarks
(BT, SP, LU, CG, MG, FT, and EP).
* The Class E problem has been added to the IS benchmark.
* In version 3.4.1, 'the number of processes' option does not apply.
* MPIFC and FC flags were added.
These versions change the install location of CMake files used
by dependents, but most dependents don't seem to look in this
new location.
Co-authored-by: Harmen Stoppels <harmenstoppels@gmail.com>
Co-authored-by: Chris White <white238@llnl.gov>
This command pokes the environment, Python interpreter
and bootstrap store to check if dependencies needed by
Spack are available.
If any are missing, it shows a comprehensible message.
* locks: allow locks to work under high contention
This is a bug found by Harshitha Menon.
The `lock=None` line shouldn't be a release but should be
```
return (lock_type, None)
```
to inform the caller it couldn't get the lock type requested without
disturbing the existing lock object in the database. There were also a
couple of bugs due to taking write locks at the beginning without any
checking or release, and not releasing read locks before requeueing.
This version no longer gives me read upgrade to write errors, even
running 200 instances on one box.
* Change lock in check_deps_status to read, release if not installed,
not sure why this was ever write, but read definitely is more
appropriate here, and the read lock is only held out of the scope if
the package is installed.
* Release read lock before requeueing to reduce chance of livelock, the
timeout that caused the original issue now happens in roughly 3 of 200
workers instead of 199 on average.
With this commit:
```
$ spack env activate --temp
$ spack install zlib
==> All of the packages are already installed
==> Updating view at /tmp/spack-faiirgmt/.spack-env/view
$ spack install zlib
==> All of the packages are already installed
```
Before this PR:
```
$ spack env activate --temp
$ spack install zlib
==> All of the packages are already installed
$ spack install zlib
==> All of the packages are already installed
```
No view was generated
This commit introduces the command
spack module tcl setdefault <package>
similar to the one already available for lmod
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
* upcxx: Update the UPC++ package to 2021.9.0
* Add the new release, and a missing older one.
* Remove the spack package cruft for supporting the obsolete build system that
was present in older versions that are no longer supported.
* General cleanups.
Support for library versions older than 2020.3.0 is officially retired,
for two reasons:
1. Releases prior to 2020.3.0 had a required dependency on Python 2,
which is [officially EOL](https://www.python.org/doc/sunset-python-2/)
as of Jan 1 2020, and is no longer considered secure.
2. (Most importantly) The UPC++ development team is unable/unwilling to
support releases more than two years old. UPC++ provides robust
backwards-compatibility to earlier releases of UPC++ v1.0, with very
rare well-documented/well-motivated exceptions. Users are strongly
encouraged to update to a current version of UPC++.
NOTE: Most of the lines changed in this commit are simply re-indentation,
and thus might be best reviewed in a diff that ignores whitespace.
* upcxx: Detect Cray XC more explicitly
This change is necessary to prevent false matches occuring on new Cray Shasta
systems, which do not use the aries network but were incorrectly being treated
as a Cray XC + aries platform.
UPC++ has not yet deployed official native support for Cray Shasta, but this
change is sufficient to allow building the portable backends there.
When running `spack install --log-format junit|cdash ...`, install
errors were ignored. This made spack continue building dependents of
failed install, ignoring `--fail-fast`, and exit 0 at the end.
* locks: allow locks to work under high contention
This is a bug found by Harshitha Menon.
The `lock=None` line shouldn't be a release but should be
```
return (lock_type, None)
```
to inform the caller it couldn't get the lock type requested without
disturbing the existing lock object in the database. There were also a
couple of bugs due to taking write locks at the beginning without any
checking or release, and not releasing read locks before requeueing.
This version no longer gives me read upgrade to write errors, even
running 200 instances on one box.
* Change lock in check_deps_status to read, release if not installed,
not sure why this was ever write, but read definitely is more
appropriate here, and the read lock is only held out of the scope if
the package is installed.
* Release read lock before requeueing to reduce chance of livelock, the
timeout that caused the original issue now happens in roughly 3 of 200
workers instead of 199 on average.
Fixes#27652
Ensure that mirror's to_dict function returns a syaml_dict object for all code
paths.
Switch to using the .get function for accessing the potential information from
the S3 mirror objects. If the key is not there, it will gracefully return
None instead of failing with a KeyError
Additionally, check that the connection object is a dictionary before trying
to "get" from it.
Add a test for the capturing of the new S3 information.
* perl: fix macOS build
With both 5.34.0 and 5.32.1 the build fails on macos-bigsur-skylake
%clang@12.0.5 and %clang13.0.0 :
```
2 errors found in build log:
579013 /private/var/folders/fy/x2xtwh1n7fn0_0q2kk29xkv9vvmbqb/T/s3j/spack-stage/spack-stage-perl-5.34.0-tpha2u52qfwaraidpzzbf6u4dbqg7dk5/spack-src/cpan/
Math-BigInt-FastCalc/../../miniperl "-I../../lib" -MExtUtils::Command::MM -e 'cp_nonempty' -- FastCalc.bs ../../lib/auto/Math/BigInt/FastCalc/Fas
tCalc.bs 644
579014
579015 Everything is up to date. Type '/Applications/Xcode.app/Contents/Developer/usr/bin/make test' to run test suite.
579016 DYLD_LIBRARY_PATH=/private/var/folders/fy/x2xtwh1n7fn0_0q2kk29xkv9vvmbqb/T/s3j/spack-stage/spack-stage-perl-5.34.0-tpha2u52qfwaraidpzzbf6u4dbqg7d
k5/spack-src ./perl -Ilib -I. installperl --destdir=
579017 WARNING: You've never run 'make test' or some tests failed! (Installing anyway.)
579018 /rnsdhpc/code/spack/opt/spack/apple-clang/perl/tpha2u5/bin/perl5.34.0
>> 579019 install_name_tool: error: sh -c '/Applications/Xcode.app/Contents/Developer/usr/bin/xcodebuild -sdk /Applications/Xcode.app/Contents/Developer/Pl
atforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk -find install_name_tool 2> /dev/null' failed with exit code 256: (null) (errno=Invalid argument
)
579020 xcode-select: Failed to locate 'install_name_tool', requesting installation of command line developer tools.
579021 Cannot update /rnsdhpc/code/spack/opt/spack/apple-clang/perl/tpha2u5/bin/perl5.34.0 dependency paths
>> 579022 make: *** [install-all] Error 72
```
This is due to SYSTEM_VERSION_COMPAT being set.
* perl: conditionally set SYSTEM_VERSION_COMPAT based on CLT
The version of command line tools is the only difference between
@alalazo and my builds: his (v11) works only when SYSTEM_VERSION_COMPAT
is set to 1, and mine (v12.5 and v13) only work when it is unset.
With this commit:
```
$ spack env activate --temp
$ spack install zlib
==> All of the packages are already installed
==> Updating view at /tmp/spack-faiirgmt/.spack-env/view
$ spack install zlib
==> All of the packages are already installed
```
Before this PR:
```
$ spack env activate --temp
$ spack install zlib
==> All of the packages are already installed
$ spack install zlib
==> All of the packages are already installed
```
No view was generated
* New package: py-onnxmltools and dependencies
* Small fix
* Changes from review
* Apply suggestions from code review
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update recipe following review
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Updates to installer.py did not account for spack monitor, so as currently implemented
there are three cases of failure that spack monitor will not account for. To fix this we add additional
hooks, including an on cancel and also do a custom action on concretization fail.
Signed-off-by: vsoch <vsoch@users.noreply.github.com>
Co-authored-by: vsoch <vsoch@users.noreply.github.com>
The latest version of `jsonschema` fails if we're not specific about which schema draft
specification we're using. Update all of them to use the latest one (draft-07).
Our `jsonschema` external won't support Python 3.10, so we need to upgrade it.
It currently generates this warning:
lib/spack/external/jsonschema/compat.py:6: DeprecationWarning: Using or importing the ABCs
from 'collections' instead of from 'collections.abc' is deprecated since Python 3.3, and
in 3.10 it will stop working
This upgrades `jsonschema` to 3.2.0, the latest version with support for Python 2.7. The next
version after this (4.0.0) drops support for 2.7 and 3.6, so we'll have to wait to upgrade to it.
Dependencies have been added in prior commits.
* [geant4] new version 11.0.0
* [geant4] prefer 10.7.3 for now
* [vecgeom] new version 1.1.18
* [clhep] new version 2.4.5.1
* [g4emlow] new version 8.0
* [g4particlexs] new version 4.p
* [geant4-data] new version 11.0.0
* [geant4] @11.0.0: cxxstd=17: ^clhep@2.4.5.1: ^vecgeom@1.1.18:
* [geant4] depends_on cmake@3.16:
* [geant4-data] remove g4tendl comment
* [g4tendl] new version 1.4
* [geant4] default cxxstd=11 when @10, 17 when @11; use CMAKE_CXX_STANDARD
* [geant4] variant tbb whe @11:, depends_on tbb, sets GEANT4_USE_TBB
* [geant4] new variant vtk when @11:, depends_on vtk@8.2:
* [geant4] simplify GEANT4_USE_VTK with define_from_variant
* [geant4] remove variant cxxstd conditional again
* [geant4] flake8 space after comma
* What's new in AOCL 3.1
1) AMD BLIS:
1.a) Supports Dynamic Dispatch and AOCL Dynamic feature
1.b) Improvements in DGEMM, ZGEMM, DTRSM, DSYRK, xGEMV, and DOTV
2) AMD libFLAME:
2.a) Supports LAPACK 3.10.0 specification
2.b) Optimized factorization and ZGEEV routines
3) AMD FFTW:
3.a) Features like 'AMD application optimization layer', 'Fast MPI transpose algorithm' and 'Top N planner' are added
4) AMD LibM:
4.a) Optimized exp2, log2 (Single and Double precision) scalar and vector
4.b) Optimized log10f (scalar and vector) and powf vector variants to support WRF4.1.2 benchmark
5) AOCL-Sparse:
5.a) New API for sparse matrix and dense matrix multiplication
6) AMD ScaLAPACK:
6.a) ILP64 support has been enabled
7) AOCL enabled MUMPS library:
7.a) CMake based build system on Windows for AOCL enabled MUMPS sparse solver library will be available shortly on GitHub
7.a.i) Refer https://github.com/amd/mumps-build
7.b) Spack-based recipe on Linux for AOCL enabled MUMPS sparse solver library will be enabled shortly
* Fix invalid version range error
* Incorporated review comments
1) Restore to previous url value
2) Instead of if else statements, used spack's enable_or_disable feature
* Incorporated following review comments:
1. Use of satisfies() for spec checks
2. Seperate conflict statements to check for minimum and maximum GCC versions
3. Used CMakePackage helpers
4. Code rearrangement to have the directives listed before methods
* New package: py-xrootdpyfs
* Add old version of py-fs
* Replace 2to3.patch with running 2to3
* Just restriuct setuptools version
* Update var/spack/repos/builtin/packages/py-fs/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
spack monitor now requires authentication as each build must be associated
with a user, so it does not make sense to allow the --monitor-no-auth flag
and this commit will remove it
* suite-sparse: Fix check for +/- tbb variant
Changed
'tbb' in spec
to
'+tbb' in spec
The former would configure suite-sparse to use tbb if any dependency
package (e.g. intel-oneapi-mkl) depends on tbb, even if
suite-sparse~tbb was specified.
* suite-sparse: conflict when trying to use 2021.x versions of tbb
See https://github.com/DrTimothyAldenDavis/SuiteSparse/issues/72
suite-sparse depends on task_schedule_init to control the number
of threads when e.g. interfacing with MATLAB. However, Intel
dropped task_schedule_init in the 2021.x releases of TBB (it has
been deprecated since TBB 4.3.5).
We just raise a spack conflict when using tbb @2021.x and +tbb
Because tbb is a virtual package and is not versioned, I have
instead checked for either intel-oneapi-tbb@2021: or
intel-tbb@2021:, not the most elegant but should do the job
* suite-sparse: fix style issues
* Added installation of OpenMP as an option
* Added a softlink (dpcpp) to clang++ to
mimic the packaged version of dpcpp
Co-authored-by: ravil <ravil.dorozhinskii@tum.de>
* Fix building container images
Patchelf is bootstrapped from sources, so we cannot
disable that mechanism until a finer selection is
possible in the configuration.
* Build on changes to the Dockerfile
* Don't login to Dockerhub on PRs
This commit introduces the command
spack module tcl setdefault <package>
similar to the one already available for lmod
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
* Update hdf5/package.py to add HDF5 1.10.8 release and move
preferred version from 1.10.7 to 1.10.8.
* silo: versions before 4.11 conflict with hdf5 >= 1.10.8.
* Add patch file for silo@4.11 with hdf5 1.10 >=1.10.8 and
hdf5 1.12 >= 1.12.1.
* New package: py-scinum
* Update var/spack/repos/builtin/packages/py-scinum/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Fix for OpenFOAM pthread issue for AOCC 3.2
* addressing the review comments
* updating when command for aocc v3.2.0 and above
Co-authored-by: mohan babu <mohbabul@amd.com>
* PETSc is a core dependency, yet we left a variant for PETSc.
This was removed, and ExaGO always depends on PETSc. The CMake
arguments were updated accordingly.
* camp+cuda is only a dependency when we build with RAJA and CUDA.
* py-radical-entk: add version 1.9.0
* py-radical-pilot: add version 1.10.1
* py-radical-utils: add version 1.9.1
* py-radical-utils: requires py-pymongo less than version 4
* New package: py-pysqlite3
* Apply suggestions from code review
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
This PR also slightly changes the behavior in ci_rebuild().
We now still attempt to submit `spack install` results to CDash
even if the initial registration failed due to connection issues.
This commit follows in the spirit of #24299. We do not want `spack install`
to exit with a non-zero status when something goes wrong while attempting to
report results to CDash.
* Add a CI job to audit all the packages in the built-in repository
* flecsi: fixed typo for dependency on legion
* py-pythonqwt: fix a typo in variant name
* sollve: removed a conflict with a non-existing variant
* acts: fixed use of wrong variant in dd4hep
Also removed duplicated variant declaration in dd4hep
* aoflagger: update variant of a dependency
Issues introduced indirectly in #22925
* camellia: removed unused variant
Issue introduced indirectly in #26150
* cbtf-*: remove cti variants and dependency on mrnet+cti
Issue introduced in #14178
* flecsale: update variants to match flecsi
Issue introduced in #11679
* grnboost: fixed issue with non-existing variant in a dependency
This package possibly never worked since #8763
* nalu: fixed issue with non-existing variant in a dependency
* open-iscsi: fixed issue with non-existing variant in a dependency
* openspeedshop-*: remove use of non-existing mrnet+cti variant
* percept: fixed issue with non-existing variant in a dependency
* phyluce: fixed issue with non-existing variant in a dependency
Issue introduced in #12952
* phyluce: fixed issue with non-existing variant in a dependency
Issue introduced in #22340
* CPU Architecture Support
This commit removes the `native` variant in favor of Spack's built-in support for specifying a target cpu architecture. It also passes this information to the Legion build system so that it correctly passes the architecture to GASNet when built internally
* fixing whitespace
* Update package.py
based on a conversation with @streichler, this change sets `BUILD_MARCH` to an empty string, which will prevent legion's CMake build system from inserting `-march=native` and allow Spack to provide the correct architecture flags.
* Update package.py
adding a comment on what problem this MR solves.
* Update package.py
formatting
* PICMI: 0.16 & 0.18 & WarpX 1D
Update the `py-picmistandard` and the latest WarpX release.
Preparing 1D support (testable inputs coming for 22.01+).
* Fix style: overlong line
* Update pypi example link
* Fix requirement ranges
* WarpX 21.12: Update Patch
Follow-up from
https://github.com/ECP-WarpX/WarpX/pull/2646
* fix style
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* openjpeg: add missing dependencies and optionally disable them
* openjpeg: remove variant 'ownlibs'
* openjpeg: bugfix
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* openjpeg: do not build CODEC executables by default
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* New package: py-hist and it's dependencies
* Update var/spack/repos/builtin/packages/py-hist/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-histoprint/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-mplhep/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update py-hist recipe
* Update package.py
* Fix py-iminuit recipe (requires py-cmake now)
* Update package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* New package: py-correctionlib
* Update var/spack/repos/builtin/packages/py-correctionlib/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-correctionlib/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Add py-make and update py-correctionlib recipe
* Add py-bind11 dependency
* Update package.py
* Update package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
This PR is meant to move code with "business logic" from `spack.cmd.buildcache` to appropriate core modules[^1].
Modifications:
- [x] Add `spack.binary_distribution.push` to create a binary package from a spec and push it to a mirror
- [x] Add `spack.binary_distribution.install_root_node` to install only the root node of a concrete spec from a buildcache (may check the sha256 sum if it is passed in as input)
- [x] Add `spack.binary_distribution.install_single_spec` to install a single concrete spec from a buildcache
- [x] Add `spack.binary_distribution.download_single_spec` to download a single concrete spec from a buildcache to a local destination
- [x] Add `Spec.from_specfile` that construct a spec given the path of a JSON or YAML spec file
- [x] Removed logic from `spack.cmd.buildcache`
- [x] Removed calls to `spack.cmd.buildcache` in `spack.bootstrap`
- [x] Deprecate `spack buildcache copy` with a message that says it will be removed in v0.19.0
[^1]: The rationale is that commands should be lightweight wrappers of the core API, since that helps with both testing and scripting (easier mocking and no need to invoke `SpackCommand`s in a script).
* New package: py-cmsml
* Update var/spack/repos/builtin/packages/py-cmsml/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* New package: py-cx-oracle
* Add dependencies from pyproject.toml
* Update var/spack/repos/builtin/packages/py-cx-oracle/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* fixing bugs in spack monitor
updates to installer.py did not account for spack monitor, so as currently implemented
there are three cases of failure that spack monitor will not account for. To fix this we add additional
hooks, including an on cancel and also do a custom action on concretization fail.
Signed-off-by: vsoch <vsoch@users.noreply.github.com>
* New package: py-climate
* Revert "fixing bugs in spack monitor"
This reverts commit bf7f6bf0e3.
* Flake-8
* Update package.py
* Update package.py
Co-authored-by: vsoch <vsoch@users.noreply.github.com>
After this PR an error in a single package while detecting
external software won't abort the entire procedure.
The error is reported to screen as a warning.
* New package: py-boost-histogram
* Update var/spack/repos/builtin/packages/py-boost-histogram/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Remove a try/catch for an error with no handling. If the affected
code doesn't execute successfully, then the associated variable
is undefined and another (more-obscure) error occurs shortly after.
Since #27185, the cuda_arch variant values are conditional on +cuda. This means that for -cuda specs, the installation fails with:
```
==> acts: Executing phase: 'cmake'
==> Error: KeyError: 'cuda_arch'
/home/wdconinc/git/spack/var/spack/repos/builtin/packages/acts/package.py:222, in cmake_args:
219 log_failure_threshold = spec.variants['log_failure_threshold'].value
220 args.append("-DACTS_LOG_FAILURE_THRESHOLD={0}".format(log_failure_threshold))
221
>> 222 cuda_arch = spec.variants['cuda_arch'].value
223 if cuda_arch != 'none':
224 args.append('-DCUDA_FLAGS=-arch=sm_{0}'.format(cuda_arch[0]))
225
```
* new package: py-tensorflow-datasets
- includes new dependency package: py-tensorflow-metadata
* Update var/spack/repos/builtin/packages/py-tensorflow-datasets/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-tensorflow-metadata/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Added gdb Dependency
When using spack to install cgdb, a spack-built gdb is necessary to
avoid dynamic link errors.
- Added maintainer: tuxfan
- Set preferred to 'master' (best version for spack currently)
* Update: The gdb dependency added by this PR is for runtime
Co-authored-by: Bernhard Kaindl <43588962+bernhardkaindl@users.noreply.github.com>
This adds support in spack for both build/install tests (spack install
--run-tests) and post-install smoke tests (spack test run).
Hpctoolkit itself only recently added tests, so for now, this only
applies to branch master.
To use this, you can "spack install intel-oneapi-compilers" and then
"spack compiler add" the new compiler. You would need to install with
"spack install ginkgo+oneapi%dpcpp"
- Use .tar.gz archive
- Update 2.3.3 to use .tar.gz archive (and update checksum)
- autoreconf dependency is no-longer required
- The new version depends on gperf
- Add sensei to the SDK with appropriate propagations
- Rework variants to SENSEI package to avoid providing broken builds
- Turn off miniapps by default, these are examples and not critical to using sensei
This PR updates the vtk package to use new variable names and adds some
dependencies.
- add version 9.1.0
- add version 1.4.2 to gl2ps package. This is needed to use gl2ps as a
dependency.
- new package: utf8cpp, used as a dependency for version 9.
- add dependencies when possible
- pugixml
- libogg
- libtheora
- utf8cpp
- gl2ps
- proj
- turn off configuring MPI if ~mpi
- always use the package-provided FindHDF5.cmake for versions up to 8.
Version @9: already does this so does not need a patch.
- use new CMake variables for version 9
- remove unused CMake variables depending on version
* py-packaging: add 21.3
* Update var/spack/repos/builtin/packages/py-packaging/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
A part of the gpgme testsuite by default even runs during normal
make and make install phases, creating a public keyring in ~/.gnupg.
Prevent this and avoid build failures in containers due to another
problem of the test suite and fix a test case of the new 0.16.0 release.
When the uidmap tools are installed on a system, this allows to run
containers as unprivileged user (rootless and daemonless) slimilar
to singularity, but using a familiar CLI: "alias docker=podman"
This is helpful to run e.g. spack builds in containers to reproduce
build failures from CI without requiring a installation of docker.
The required dependencies of podman are added as well.
Fix to not attempt to patch a nonexisting file for old versions
when building with gcc-11. Skip the build-time tests as all access
the X DISPLAY and open many windows on the screen.
I was browsing package metadata, as one does on a Sunday, and stumbled across a new kind of version attribute - brancch! I suspect this is supposed to be "branch."
Update flux-core and flux-sched package.py to include latest releases.
For flux-sched:
- Add patch to disable false-positive-happy valgrind test
- pin yaml-cpp to 0.6.3 due to issue described at:
https://github.com/flux-framework/flux-sched/issues/886
Starting with meson 0.60, unknown args produce errors and
the -Dx11 arg is only present in @:2.40
https://gitlab.gnome.org/GNOME/gtk-osx/-/issues/44
Add tiff variant: Default disabled since fails the tests in part.
Only libtiff@:3.9 pass, but these old versions have severe security issues.
Deprecate @:2.41 as they are affected by the high-severity CVE-2021-20240:
https://nvd.nist.gov/vuln/detail/CVE-2021-20240
Remove a custom bootstrapping procedure to
use spack.bootstrap instead
Modifications:
* Reference count the bootstrap context manager
* Avoid SpackCommand to make the bootstrapping
procedure more transparent
* Put back requirement on patchelf being in PATH for unit tests
* Add an e2e test to check bootstrapping patchelf
* Fix version constrains in py-ipykernel and py-ipython
Before the fix:
```
$ spack spec py-ipykernel@6.4.1 ^py-jupyter-client@7.0.6
==> Error: py-ipykernel@6.4.1 ^py-jupyter-client@7.0.6 is unsatisfiable, conflicts are:
no version satisfies the given constraints
```
After the fix:
```
```
(thanks god the old concretizer is still there - it provides sane error messages!)
* Fix py-ipython recipe
* Revert "Fix py-ipython recipe"
This reverts commit d65071665f.
* added package gptune with all its dependencies: adding py-autotune, pygmo, py-pyaml, py-autotune, py-gpy, py-lhsmdu, py-hpbandster, pagmo2, py-opentuner; modifying superlu-dist, py-scikit-optimize
* adding gptune package
* minor fix for macos spack test
* update patch for py-scikit-optimize; update test files for gptune
* fixing gptune package style error
* fixing unit tests
* a few changes reviewed in the PR
* improved gptune package.py with a few newly added/improved dependencies
* fixed a few style errors
* minor fix on package name py-pyro4
* fixing more style errors
* Update var/spack/repos/builtin/packages/py-scikit-optimize/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* resolved a few issues in the PR
* fixing file permissions
* a few minor changes
* style correction
* minor correction to jq package file
* Update var/spack/repos/builtin/packages/py-pyro4/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* fixing a few issues in the PR
* adding py-selectors34 required by py-pyro4
* improved the superlu-dist package
* improved the superlu-dist package
* moree changes to gptune and py-selectors34 based on the PR
* Update var/spack/repos/builtin/packages/py-selectors34/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
I think this test should be removed, but when it stays, it should at
least follow the symlink, cause it fails for me if I let spack build
patchelf and have a symlink in a view.
- Prevent `-j` flags to `make`, which has been known to cause problems
with Racket builds.
- Add variants for various common build flags, including support
for both versions of the Racket VM environment.
In addition:
- Prefer the minimal release to improve install times. Bells and
whistles carry their own runtime dependencies and should be
installed via `raco`. An enterprising user may even create a
`RacoPackage` class to make spack aware of `raco` installed packages.
- Match the official version numbering scheme.
Modifications:
- [x] Removed `centos:6` unit test, adjusted vermin checks
- [x] Removed backport of `collections.OrderedDict`
- [x] Removed backport of `functools.total_ordering`
- [x] Removed Python 2.6 specific skip markers in unit tests
- [x] Fixed a few minor Python 2.6 related TODOs in code
Updating the vendored dependencies will be done in separate PRs
* py-cython: add 3.0.0a9
* Update var/spack/repos/builtin/packages/py-cython/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* New version: py-singledispatch 3.7.0
* Apply suggestions from code review
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Make CUDA and ROCm architecture conditional
fixes#14337
The variant to specify which architecture to use
for CUDA and ROCm are now conditional on +cuda and
+rocm respectively.
* cp2k: make all CUDA related variants conditional on +cuda
* New version: py-pyzmq 22.3.0
* Update var/spack/repos/builtin/packages/py-pyzmq/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Add connection specification to mirror creation
This allows each mirror to contain information about the credentials
used to access it.
Update command and tests based on comments
Switch to only "long form" flags for the s3 connection information.
Use the "any" function instead of checking for an empty list when looking
for s3 connection information.
Split test to use the access token separately from the access id and key.
Use long flag form in test.
Add endpoint_url to available S3 options.
Extend the special parameters for an S3 mirror to accept the
endpoint_url parameter.
Add a test.
* Add connection information per URL not per mirror
Expand the mirror-based connection information to be per-URL.
This will allow a user to specify different S3 connection information
for both the fetch and the push URLs.
Add a parameter for "profile", another way of storing the id/secret pair.
* Switch from "access_profile" to "profile"
* py-cycler: add 0.11.0
* Update var/spack/repos/builtin/packages/py-cycler/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* New version: py-qtconsole 5.2.0
* Apply suggestions from code review
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* New version: openldap 2.6.0;
fix recipe for groff (requires pkg-config to find uchardet);
fix recipe for openldap (requires groff to build documentation)
* Restrict openldap versions of py-python-ldap and percona-server
* Update var/spack/repos/builtin/packages/groff/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
This causes `otfconfig` to also list zlib's library directory.
Otherwise, `-lz` cannot be found. Also remove `--with-zlibsymbols`,
which doesn't seem to be supported anymore.
Include several several patches to vtk 8.1 for building on a
system with no system install X11 libraries or include files.
Specify specific versions of dependent packages that are known to work with 3.2.1.
Tested on spock.olcf.ornl.gov. The GUI came up and rendered images
and an image was successfully saved using off screen rendering from
data from curv2d.silo.
Remove the "get_executable" function from the
spack.bootstrap module. Now "flake8", "isort",
"mypy" and "black" will use the same
bootstrapping method as GnuPG.
Currently Spack vendors `pytest` at a version which is three major
versions behind the latest (3.2.5 vs. 6.2.4). We do that since v3.2.5
is the latest version supporting Python 2.6. Remaining so much
behind the currently supported versions though might introduce
some incompatibilities and is surely a technical debt.
This PR modifies Spack to:
- Use the vendored `pytest@3.2.5` only as a fallback solution,
if the Python interpreter used for Spack doesn't provide a newer one
- Be able to parse `pytest --collect-only` in all the different output
formats from v3.2.5 to v6.2.4 and use it consistently for `spack unit-test --list-*`
- Updating the unit tests in Github Actions to use a more recent `pytest` version
The previous workaround of using CMAKE_INSTALL_RPATH=ON was used to
avoid CMake trying to write an RPATH into the linker script libcxx.so,
which is nonsensical. See commit f86ed1e.
However, CMAKE_INSTALL_RPATH=ON seems to disable the build RPATH, which
breaks LLVM during the build when it has to locate its build-time shared
libraries (e.g. libLLVM.so). That required yet another workaround, where
some shared libraries were installed "by hand", so that they were picked
up from the install libdir. See commit 8a81229.
This was a dirty workaround, and also makes it impossible to use ninja,
since we explicitly invoked make.
This commit removes the two old workaround, and sets
LIBCXX_ENABLE_STATIC_ABI_LIBRARY=ON, so that libc++abi.a is linked into
libc++.so, which makes it enough to link with -lc++ or invoke clang++
with -stdlib=libc++, so that our install succeeds and linking LLVM's c++
standard lib is still easy.
Some packages use a 64_ or _64 symbol suffix for the ilp64 (= 64-bit
integers) intefrace for BLAS. In particular if we want to support shim
libraries like libopenblastrampoline supporting both the 32 and 64 bit
integer version of blas, it must be possible to distinguish between the
two.
mesa inherits MesonPackage (since October 2020) which depends on Py@3.
The conflicts('mesa') enables a regular build of `qt@5.7:5.15+webkit`
without having to specify the exact version by causing the concretizer
to select mesa18 which does not depend on python@3.
Co-authored-by: Bernhard Kaindl <bernhard.kaindl@ait.ac.at>
This type of error is skipped:
make[1]: *** [Makefile:222: /tmp/user/spack-stage/.../spack-src/usr/lib/julia/libopenblas64_.so.so] Error 1
but it's useful to have it, especially when a package sets a variable
incorrectly in makefiles
* New version: py-pylint 2.8.2; new package py-platformdirs
* Update var/spack/repos/builtin/packages/py-platformdirs/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-pylint/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Intel mpi comes with an installation of libfabric (which it needs as a
dependency). It can use other implementations of libfabric at runtime
though, so if you install a package that depends on `mpi` and
`libfabric`, you can specify `intel-mpi+external-libfabric` and ensure
that the Spack-built instance is used (both by `intel-mpi` and the
root).
Apply analogous change to intel-oneapi-mpi.
* New version: py-pyrsistent 0.18.0
* Update package.py
* Update var/spack/repos/builtin/packages/py-pyrsistent/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* New version: py-pytest 6.2.5
* Update var/spack/repos/builtin/packages/py-pytest/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Use setup_run_environment to search for libraries and set env variables for module generation.
Libraries are installed with CMAKE_INSTALL_LIBDIR, which can be lib or lib64 depending on the machine, which makes it impossible to hardcode through modules.yaml.
If the perl that perl-forks is built against is non-threaded the build
system will drop into interactive mode to ask about simulating ithreads.
This causes the build to hang. Set FORKS_SIMULATE_USEITHREADS to avoid
going into interactive mode.
If building Qt on a system with a recent glibc but an older kernel, it
is possible that Qt configures features based on glibc that are not
supported in the kernel. This PR tests the kernel version and ensures
certain features are disabled if the kernel does not support them.
* New version: py-prettytable 2.4.0; update homepage
* Update var/spack/repos/builtin/packages/py-prettytable/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* New version: py-prometheus-client 0.12.0; new dependency (py-twisted) version 21.7.0 + it's dependencies
* Apply suggestions from code review (1/?)
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Changes from review (2/?)
* Changes from review (3/?)
* Changes from review (4/?)
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
- disable graphblas by default (very slow to compile)
- fix patch upperbound for cuda 11
- remove find_system_libs; not sure why it was added in the first place,
but it makes spack rather unusable as it introduces an rpath to /lib/...
* New version: py-oauthlib 3.1.1
* Update var/spack/repos/builtin/packages/py-oauthlib/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Generalize env var PYTHON to avoid version conflicts
* Use available python executable
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* upcxx: Update the UPC++ package to 2021.9.0
* Add the new release, and a missing older one.
* Remove the spack package cruft for supporting the obsolete build system that
was present in older versions that are no longer supported.
* General cleanups.
Support for library versions older than 2020.3.0 is officially retired,
for two reasons:
1. Releases prior to 2020.3.0 had a required dependency on Python 2,
which is [officially EOL](https://www.python.org/doc/sunset-python-2/)
as of Jan 1 2020, and is no longer considered secure.
2. (Most importantly) The UPC++ development team is unable/unwilling to
support releases more than two years old. UPC++ provides robust
backwards-compatibility to earlier releases of UPC++ v1.0, with very
rare well-documented/well-motivated exceptions. Users are strongly
encouraged to update to a current version of UPC++.
NOTE: Most of the lines changed in this commit are simply re-indentation,
and thus might be best reviewed in a diff that ignores whitespace.
* upcxx: Detect Cray XC more explicitly
This change is necessary to prevent false matches occuring on new Cray Shasta
systems, which do not use the aries network but were incorrectly being treated
as a Cray XC + aries platform.
UPC++ has not yet deployed official native support for Cray Shasta, but this
change is sufficient to allow building the portable backends there.
* py-setupmeta: add new package
* Update var/spack/repos/builtin/packages/py-setupmeta/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
When running `spack install --log-format junit|cdash ...`, install
errors were ignored. This made spack continue building dependents of
failed install, ignoring `--fail-fast`, and exit 0 at the end.
* Add hdf5-vol-async package.
Add HDF5 1.13.0-rc6 version for building vol-async.
* Style test required another blank line.
* Change hdf5 dependency to develop-1.13+mpi+threadsafe.
* Update args for hdf5-vol-async.
Open MPI currently fails to build with scheduler=slurm if +pmix is
not given with a fatal error due to ``config_args +=
self.with_or_without('pmix', ...)`` resulting in --without-pmix.
However, Open MPI's configure points out "Note that Open MPI does
not support --without-pmix."
The PR only adds "--with-pmix=PATH" if +pmix is part of the spec.
Otherwise, nothing is added and Open MPI can fall back to its
internal PMIX sources.
(The other alternative would be to depend on +pmix in for
scheduler=slurm as is done for +pmi.)
- Added new checksums for 4.3.
- Now using llvm-amdgpu ~openmp in order to use the rocm-device-libs
build as external project in llvm-amdgpu package. We still need
to pull device-libs in using resource for the build as some headers
are not installed.
- Updated symlink creation to now remove an existing link if present
to avoid issues on partial reinstalls when debugging.
- Adjusted the flang_warning to be a part of Cmake options instead of
a filter_file for better compatability.
- The dependency on hsa-rocr-dev created some problems as type was changed
to the default build/link. This issue was because ROCr uses libelf and
the build of openmp expects elfutils. When link is specified libelf
was being found in the path first, causing errors. This was
introduced with the llvm-amdgpu external project build of device-libs.
- On a bare bone installation of sles15 it was noted that libquadmath0 was
needed as a dependency. On 18.04 gcc-multilib was also needed.
* Workaround for libelf headers being used instead of elfutils.
Due to Kitware API changes, default ANTs builds were failing, presumably for all versions (https://github.com/ANTsX/ANTs/issues/1236).
This commit defaults BUILD_TESTING to OFF, preventing calls against
these APIs and fixing all versions.
Note that the ANTs test suite was not clean anyway (e.g. ANTs/#842).
* Python tests: allow importing weirdly-named modules
e.g. with dashes in name
* SIP tests: allow importing weirdly-named modules
* Skip modules with invalid names
* Changes from review
* Update from review
* Update from review
* Cleanup
* New version: py-lz4 3.1.3; use external lz4 instead of bundled one
* Update var/spack/repos/builtin/packages/py-lz4/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Changes from review
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Add spack package py-ytopt-team-ytopt and required dependencies.
* Removed old ytop package.
* Added author as maintainer.
* Fix style.
* Update var/spack/repos/builtin/packages/py-config-space/package.py
Update python dependency to 3.7
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-config-space/package.py
Remove run dependency from py-cython.
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-config-space/package.py
Added run dependency type for py-pyparsing.
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Updated description of py-dh-scikit-optimize.
* Source py-dh-scikit-optimize from PyPI.
* Added latest py-dh-scikit-optimize version.
* Made plots option False by default for py-dh-scikit-optimize.
* Removed 0.9.4 as it needs additional dependencies.
* Added version dependencies.
* Added missing py-joblib dependencies.
* Added run dependency type.
* Added python 2.7+ as supported for py-pyaml.
* Change py-config-space to py-configspace.
* Added dependency on python 3.6+.
* Fix py-configspace package naming.
* Changed py-autotune to py-ytopt-autotune.
* Update var/spack/repos/builtin/packages/py-pyaml/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Added debug variant with py-ray dependency.
* Added missing py-mpi4py missing dependency.
* Removed erroneous variant.
* Added debug variant to py-ray.
* Fix indentation.
* Removed debug variant of py-ray.
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Noting that missing numeric_limits was the cause of the compile issues
with gcc-11, I tested adding -include limits fixing @5.9:5.14%gcc@11.
Therefore, we can replace the conflicts('%gcc@11:', when='@5.9:5.14').
Co-authored-by: Bernhard Kaindl <bernhard.kaindl@ait.ac.at>
* Prevent additional properties to be in the answer set when reusing specs
fixes#27237
The mechanism to reuse concrete specs relies on imposing
the set of constraints stemming from the concrete spec
being reused.
We also need to prevent that other constraints get added
to this set.
See #25249 and https://github.com/spack/spack/pull/27159#issuecomment-958163679.
This adds `spack load --list` as an alias for `spack find --loaded`. The new command is
not as powerful as `spack find --loaded`, as you can't combine it with all the queries or
formats that `spack find` provides. However, it is more intuitively located in the command
structure in that it appears in the output of `spack load --help`.
The idea here is that people can use `spack load --list` for simple stuff but fall back to
`spack find --loaded` if they need more.
- add help to `spack load --list` that references `spack find`
- factor some parts of `spack find` out to be called from `spack load`
- add shell tests
- update docs
Co-authored-by: Peter Josef Scheibel <scheibel1@llnl.gov>
Co-authored-by: Richarda Butler <39577672+RikkiButler20@users.noreply.github.com>
Reformulate variant rules so that we minimize both
1. The number of non-default values being used
2. The number of default values not-being used
This is crucial for MV variants where we may have
more than one default value
In our tests, we use concrete specs generated from mock packages,
which *only* occur as inputs to the solver. This fixes two problems:
1. We weren't previously adding facts to encode the necessary
`depends_on()` relationships, and specs were unsatisfiable on
reachability.
2. Our hash lookup for reconstructing the DAG does not
consider that a hash may have come from the inputs.
Concrete specs that are already installed or that come from a buildcache
may have compilers and variant settings that we do not recognize, but that
shouldn't prevent reuse (at least not until we have a more detailed compiler
model).
- [x] make sure compiler and variant consistency rules only apply to
built specs
- [x] don't validate concrete specs on input, either -- they're concrete
and we shouldn't apply today's rules to yesterday's build
In switching to hash facts for concrete specs, we lost the transitive facts
from dependencies. This was fine for solves, because they were implied by
the imposed constraints from every hash. However, for `spack diff`, we want
to see what the hashes mean, so we need another mode for `spec_clauses()` to
show that.
This adds a `expand_hashes` argument to `spec_clauses()` that allows us to
output *both* the hashes and their implications on dependencies. We use
this mode in `spack diff`.
- [x] Get rid of forgotten maximize directive.
- [x] Simplify variant handling
- [x] Fix bug in treatment of defaults on externals (don't count
non-default variants on externals against them)
Variants in concrete specs are "always" correct -- or at least we assume
them to be b/c they were concretized before. Their variants need not match
the current version of the package.
Multi-valued variants previously maximized default values to handle
cases where the default contained two values, e.g.:
variant("foo", default="bar,baz")
This is because previously we were minimizing non-default values, and
`foo=bar`, `foo=baz`, and `foo=bar,baz` all had the same score, as
none of them had any "non-default" values.
This commit changes the approach and considers a non-default value
to be either a value set to something not default *or* the absence
of a default value from the set value. This allows multi- and
single-valued variants to be handled the same way, with the same
minimization criterion. It alse means that the "best" value for every
optimization criterion is now zero, which allows us to make useful
assumptions about the optimization criteria.
Minimizing builds is tricky. We want a minimizing criterion because
we want to reuse the avaialble installs, but we also want things that
have to be built to stick to *default preferences* from the package
and from the user. We therefore treat built specs differently and
apply a different set of optimization criteria to them. Spack's *first*
priority is to reuse what it can, but if it builds something, the built
specs will respect defaults and preferences.
This is implemented by bumping the priority of optimization criteria
for built specs -- so that they take precedence over the otherwise
topmost-priority criterion to reuse what is installed.
The scheme relies on all of our optimization criteria being minimizations.
That is, we need the case where all specs are reused to be better than
any built spec could be. Basically, if nothing is built, all the build
criteria are zero (the best possible) and the number of built packages
dominates. If something *has* to be built, it must be strictly worse
than full reuse, because:
1. it increases the number of built specs
2. it must have either zero or some positive number for all criteria
Our optimziation criteria effectively sum into two buckets at once to
accomplish this. We use a `build_priority()` number to shift the
priority of optimization criteria for built specs higher.
The constraints in the `spack diff` test were very specific and assumed
a lot about the structure of what was being diffed. Relax them a bit to
make them more resilient to changes.
Make the first minimization conditional on whether `--reuse` is enabled in the solve.
If `--reuse` is not enabled, there will be nothing in the set to minimize and the
objective function (for this criterion) will be 0 for every answer set.
Many of the integrity constraints in the concretizer are there to restrict how solves are done, but
they ignore that past solves may have had different initial conditions. For example, for things
we're building, we want the allowed variants to be restricted to those currently in Spack packages,
but if we are reusing a concrete spec, we need to be flexible about names that may have existed in
old packages.
Similarly, restrictions around compatibility of OS's, compiler versions, compiler OS support, etc.
are really only about what is supported by the *current* set of compilers/build tools known to
Spack, not about what we may get from concrete specs.
- [x] restrict certain integrity constraints to only apply to packages that we need to build, and
omit concrete specs from consideration.
The OS logic in the concretizer is still the way it was in the first version.
Defaults are implemented in a fairly inflexible way using straight logic. Most
of the other sections have been reworked to leave these kinds of decisions to
optimization. This commit does that for OS's as well.
As with targets, we optimize for target matches. We also try to optimize for
OS matches between nodes. Additionally, this commit adds the notion of
"OS compatibility" where we allow for builds to depend on binaries for certain
other OS's. e.g, for macos, a bigsur build can depend on an already installed
(concrete) catalina build. One cool thing about this is that we can declare
additional compatible OS's later, e.g. CentOS and RHEL.
If we don't rename Spack will fail with:
```
ImportError: cannot bootstrap the "clingo" Python module from spec "clingo-bootstrap@spack+python %gcc target=x86_64" due to the following failures:
'spack-install' raised ValueError: Invalid config scope: 'bootstrap'. Must be one of odict_keys(['_builtin', 'defaults', 'defaults/cray', 'bootstrap/cray', 'disable_modules', 'overrides-0'])
Please run `spack -d spec zlib` for more verbose error messages
```
in case bootstrapping from binaries fails and we are
falling back to bootstrapping from sources.
ensure that none of ^intel-mkl, ^intel-mpi, and ^mkl are used, unless
the compiler is intel.
Fix bad logic in the src/src_xs/m_makespectrum.f90 file in the oxygen version.
Add the -fallow-argument-mismatch for gcc >= 10.
* scr: 3.0rc2 release, variants and deps updates
This adds 3.0rc2 release for end users to aid in testing scr for
upcoming 3.0 release.
Included in this change:
- Require most recent component versions for this release
- Add a variant for PDSH as it is now an optional dependency with
this release
- Add bbapi and datawarp (dw) variants
- bbapi_fallback variant now requires bbapi variant with latest
release
- Add variants to enable/disable examples and tests
- Add shared variant and current conflicts with ~shared
- Update cmake_args to account for added variants where needed
Additional updates:
- Add maintainers
- Use lists and for loops to clean up repetitive code involving all
components
- Use self.define and self.define_from_variant to clean up cmake_args
- Use consistent quoting throughout package
* Un-deprecate v2 and legacy
* Use new conditional variants
* trilinos: fix @13.0.1+tpetra^cuda@11
* Mark CUDA conflict with old versions and always define TPL
* trilinos: patch doesn't build so just mark as conflict
A common question from users has been how to model variants
that are new in new versions of a package, or variants that are
dependent on other variants. Our stock answer so far has been
an unsatisfying combination of "just have it do nothing in the old
version" and "tell Spack it conflicts".
This PR enables conditional variants, on any spec condition. The
syntax is straightforward, and matches that of previous features.
* GnuPG: allow bootstrapping from buildcache and sources
* Add a test to bootstrap GnuPG from binaries
* Disable bootstrapping in tests
* Add e2e test to bootstrap GnuPG from sources on Ubuntu
* Add e2e test to bootstrap GnuPG on macOS
* trilinos: add @13.2.0, and switch default to cxxstd=14
* trilinos: fix python dependency when using +ifpack or +ifpack2
* trilinos: add conflict for ~epetra +ml when @13.2.0:
* trilinos: keep 13.0.1 as the preferred version
* Update var/spack/repos/builtin/packages/trilinos/package.py
Co-authored-by: Seth R. Johnson <johnsonsr@ornl.gov>
* update
Co-authored-by: Seth R. Johnson <johnsonsr@ornl.gov>
This PR adds error message sentinels to the clingo solve, attached to each of the rules that could fail a solve. The unsat core is then restricted to these messages, which makes the minimization problem tractable. Errors that can only be generated by a bug in the logic program or generating code are prefaced with "Internal error" to make clear to users that something has gone wrong on the Spack side of things.
* minimize unsat cores manually
* only errors messages are choices/assumptions for performance
* pre-check for unreachable nodes
* update tests for new error message
* make clingo concretization errors show up in cdash reports fully
* clingo: make import of clingo.ast parsing routines robust to clingo version
Older `clingo` has `parse_string`; newer `clingo` has `parse_files`. Make the
code work wtih both.
* make AST access functions backward-compatible with clingo 5.4.0
Clingo AST API has changed since 5.4.0; make some functions to help us
handle both versions of the AST.
Co-authored-by: Todd Gamblin <tgamblin@llnl.gov>
This removes `-lpytrilinos` from Makefile.export.Trilinos so that C code
trying to link against a Trilinos built with PyTrilinos does not fail
due to undefined references to python routines (libpytrilinos is only
used when importing PyTrilinos in python, in which case those references
are already defined by Python).
There was already a bit of code to do something similar for C codes
importing Trilinos via a CMake mechanism, this extends that to a basic
Makefile mechanism as well. This patch also updates the comments to
remove a stale link discussing this issue, and replacing with links to
the some Trilinos issue reports related to the matter.
After #26608 I got a report about missing rpaths when building a
downstream package independently using a spack-installed toolchain
(@tmdelellis). This occurred because the spack-installed libraries were
being linked into the downstream app, but the rpaths were not being
manually added. Prior to #26608 autotools-installed libs would retain
their hard-coded path and would thus propagate their link information
into the downstream library on mac.
We could solve this problem *if* the mac linker (ld) respected
`LD_RUN_PATH` like it does on GNU systems, i.e. adding `rpath` entries
to each item in the environment variable. However on mac we would have
to manually add rpaths either using spack's compiler wrapper scripts or
manually (e.g. using `CMAKE_BUILD_RPATH` and pointing to the libraries of
all the autotools-installed spack libraries).
The easier and safer thing to do for now is to simply stop changing the
dylib IDs.
gconf depends on gettext and libintl (dep: intltool)
glibmm, gtkmm, libcanberra and cups need pkgconfig
glibmm needs libsigc++ < 2.9x(which are 3.x pre-releases)
libsigc++@:2.9 depends on m4 for the build
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
- add version 6.0.5
- add patch to allow fsl to use newer gcc versions
- add patch to allow fsl to use newer cuda versions
- remove constraints on gcc and cuda versions
- add filters to prevent using system headers and libraries
- clean up the installed tree
The `--generic` argument allows printing the best generic target for the
current machine. This can be quite handy when wanting to find the
generic architecture to use when building a shared software stack for
multiple machines.
This PR adds a "spack tags" command to output package tags or
(available) packages with those tags. It also ensures each package
is listed in the tag cache ONLY ONCE per tag.
glib has a few tests which have external dependencies or
try to access the X server. We cannot run those.
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
* ci: Enable more packages in the DVSDK CI pipeline
* doxygen: Add conflicts for gcc bugs
* dray: Add version constraints for api breakage with newer deps
5.14.2 fails with %gcc@11 with Error: 'numeric_limits' is not a class template
5.8.0 has multiple compile failures as well: Extend the conflict to those too.
- Fix also the confgigure of @5.6.3 (tested with %gcc@11)
* New versions: py-gitdb 4.0.7, 4.0.8, 4.0.9
* Update var/spack/repos/builtin/packages/py-gitdb/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* New versions of py-google-auth and py-google-auth-oauthlib
* Update var/spack/repos/builtin/packages/py-google-auth/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* New verion: py-html5lib 1.1
* Update var/spack/repos/builtin/packages/py-html5lib/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-html5lib/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update package.py
* Update package.py
* Update package.py
* Update package.py
* Update var/spack/repos/builtin/packages/py-html5lib/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-html5lib/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* New version: py-importlib-resources 5.3.0
* Update var/spack/repos/builtin/packages/py-importlib-resources/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* py-slurm-pipeline: Add 4.0.4, Fix base.py: import six for @:3
Before 4.0.0, slurm_pipeline/base.py has: `from six import string_types`
* Added depends_on('py-pytest@6.2.2:', type='build') as requested by Adam
* remove comment requested to be removed
- [x] Allow dding enumerated types and types whose default value is forbidden by the schema
- [x] Add a test for using enumerated types in the tests for `spack config add`
- [x] Make `config add` tests use the `mutable_config` fixture so they do not
affect other tests
Co-authored-by: Todd Gamblin <tgamblin@llnl.gov>
The build-time testsuite which would be run when building
with tests needs docker. Check that it exists before
attempting to execute the tests.
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
If you don't format `spack.yaml` correctly, `spack config edit` still fails and
you have to edit your `spack.yaml` manually.
- [x] Add some code to `_main()` to defer `ConfigFormatError` when loading the
environment, until we know what command is being run.
- [x] Make `spack config edit` use `SPACK_ENV` instead of the config scope
object to find `spack.yaml`, so it can work even if the environment is bad.
Co-authored-by: scheibelp <scheibel1@llnl.gov>
`spack config get <section>` was erroneously returning just the `spack.yaml`
for the environment.
It should return the combined configuration for that section (including
anything from `spack.yaml`), even in an environment.
- [x] reorder conditions in `cmd/config.py` to fix
`spack --debug config edit` was not working properly -- it would not do show a
stack trace for configuration errors.
- [x] Rework `_main()` and add some notes for maintainers on where things need
to go for configuration to work properly.
- [x] Move config setup to *after* command-line parsing is done.
Co-authored-by: scheibelp <scheibel1@llnl.gov>
`main()` has grown, and in some cases code that can generate errors has gotten
outside the top-level try/catch in there. This means that simple errors like
config issues give you large stack traces, which shouldn't happen without
`--debug`.
- [x] Split `main()` into `main()` for the top-level error handling and
`_main()` with all logic.
There were some loose ends left in ##26735 that cause errors when
using `SPACK_DISABLE_LOCAL_CONFIG`.
- [x] Fix hard-coded `~/.spack` references in `install_test.py` and `monitor.py`
Also, if `SPACK_DISABLE_LOCAL_CONFIG` is used, there is the issue that
`$user_config_path`, when used in configuration files, makes no sense,
because there is no user config scope.
Since we already have `$user_cache_path` in configuration files, and since there
really shouldn't be *any* data stored in a configuration scope (which is what
you'd configure in `config.yaml`/`bootstrap.yaml`/etc., this just removes
`$user_config_path`.
There will *always* be a `$user_cache_path`, as Spack needs to write files, but
we shouldn't rely on the existence of a particular configuration scope in the
Spack code, as scopes are configurable, both in number and location.
- [x] Remove `$user_config_path` substitution.
- [x] Fix reference to `$user_config_path` in `etc/spack/deaults/bootstrap.yaml`
to refer to `$user_cache_path`, which is where it was intended to be.
* Deactivate previous env before activating new one
Currently on develop you can run `spack env activate` multiple times to switch
between environments, but they leave traces, even though Spack only supports
one active environment at a time.
Currently:
```console
$ spack env create a
$ spack env create b
$ spack env activate -p a
[a] $ spack env activate -p b
[b] [a] $ spack env activate -p b
[a] [b] [a] $ spack env activate -p a
[a] [b] [c] $ echo $MANPATH | tr ":" "\n"
/path/to/environments/a/.spack-env/view/share/man
/path/to/environments/a/.spack-env/view/man
/path/to/environments/b/.spack-env/view/share/man
/path/to/environments/b/.spack-env/view/man
```
This PR fixes that:
```console
$ spack env activate -p a
[a] $ spack env activate -p b
[b] $ spack env activate -p a
[a] $ echo $MANPATH | tr ":" "\n"
/path/to/environments/a/.spack-env/view/share/man
/path/to/environments/a/.spack-env/view/man
```
Currently spack is a bit of a bad actor as a zsh plugin, and it was my
fault. The autoload and compinit should really be handled by the user,
as was made abundantly clear when I found spack was doing completion
initialization for *all* of my plugins due to a deferred setup that was
getting messed up by it.
Making this conditional took spack load time from 1.5 seconds (with
module loading disabled) to 0.029 seconds. I can actually afford to load
spack by default with this change in.
Hopefully someday we'll do proper zsh completion support, but for now
this helps a lot.
* use zsh hist expansion in place of dirname
* only run (bash)compinit if compdef/complete missing
* add zsh compiled files to .gitignore
* move changes to .in file, because spack
* Drastically improve YamlFilesystemView file removal via batching
The `remove_file` routine has to check if the file is owned by multiple packages, so it doesn't
remove necessary files. This is done by the `get_all_specs` routine, which walks the entire
package tree. With large numbers of packages on shared file systems, this can take seconds
per file tree traversal, which adds up extremely quickly. For example, a single deactivate
of a largish python package in our software stack on GPFS took approximately 40 minutes.
This patch simply replaces `remove_file` with a batch `remove_files` routine. This routine
removes a list of files rather than a single file, requiring only one traversal per batch. In
practice this means a package can be removed in seconds time, rather than potentially hours,
essentially a ~100x speedup (ignoring initial deactivation logic, which takes about 3 minutes
in our test setup).
* Fix sbang hook for non-writable files
PR #26793 seems to have broken the sbang hook for files with missing
write permissions. Installing perl now breaks with the following error:
```
==> [2021-10-28-12:09:26.832759] Error: PermissionError: [Errno 13] Permission denied: '$SPACK/opt/spack/linux-fedora34-zen2/gcc-11.2.1/perl-5.34.0-afuweplnhphcojcowsc2mb5ngncmczk4/bin/cpanm'
```
Temporarily add write permissions to the original file so it can be
overwritten with the patched one.
And test that file permissions are preserved in sbang even for non-writable files
Co-authored-by: Harmen Stoppels <harmenstoppels@gmail.com>
When relocating a binary distribution, Spack only checks files to see
if they are a link that needs to be relocated. Directories can be
such links as well, however, and need to undergo the same checks
and potential relocation.
`spack list` tests are not using mock packages for some reason, and many
are marked as potentially slow. This isn't really necessary; we don't need
6,000 packages to test the command.
- [x] update tests to use `mock_packages` fixture
- [x] remove `maybeslow` annotations
Currently Spack reads full files containing shebangs to memory as
strings, meaning Spack would have to guess their encoding. Currently
Spack has a fixed guess of UTF-8.
This is unnecessary, since e.g. the Linux kernel does not assume an
encoding on paths at all, it's just bytes and some delimiters on the
byte level.
This commit does the following:
1. Shebangs are treated as bytes, so that e.g. latin1 encoded files do
not throw UnicodeEncoding errors, and adds a test for this.
2. No more bytes than necessary are read to memory, we only have to read
until the first newline, and from there on we an copy the file byte by
bytes instead of decoding and re-encoding text.
3. We cap the number of bytes read to 4096, if no newline is found
before that, we don't attempt to patch it.
4. Add support for luajit too.
This should make Spack both more efficient and usable for non-UTF8
files.
Spack's `system` and `user` scopes provide ways for administrators and
users to set global defaults for all Spack instances, but for use cases
where one wants a clean Spack installation, these scopes can be undesirable.
For example, users may want to opt out of global system configuration, or
they may want to ignore their own home directory settings when running in
a continuous integration environment.
Spack also, by default, keeps various caches and user data in `~/.spack`,
but users may want to override these locations.
Spack provides three environment variables that allow you to override or
opt out of configuration locations:
* `SPACK_USER_CONFIG_PATH`: Override the path to use for the
`user` (`~/.spack`) scope.
* `SPACK_SYSTEM_CONFIG_PATH`: Override the path to use for the
`system` (`/etc/spack`) scope.
* `SPACK_DISABLE_LOCAL_CONFIG`: set this environment variable to completely
disable *both* the system and user configuration directories. Spack will
only consider its own defaults and `site` configuration locations.
And one that allows you to move the default cache location:
* `SPACK_USER_CACHE_PATH`: Override the default path to use for user data
(misc_cache, tests, reports, etc.)
With these settings, if you want to isolate Spack in a CI environment, you can do this:
export SPACK_DISABLE_LOCAL_CONFIG=true
export SPACK_USER_CACHE_PATH=/tmp/spack
This is a stop-gap approach until we have figured out how to deal with
the system and user config scopes more generally, as there are plans to
potentially / eventually get rid of them.
**User config**
Spack is a bit of a pain when you have:
- a shared $HOME folder across different systems.
- multiple Spack versions on the same system.
**System config**
- On shared systems with a versioned programming environment / toolkit,
system administrators want to provide config for each version (e.g.
21.09, 21.10) of the programming environment, and the user Spack
instance should be able to pick this up without a steep learning
curve.
- On shared systems the user should be able to opt out of the
hard-coded config scope in /etc/spack, since it may be incompatible
with their particular instance. Currently Spack can only opt out of all
config scopes through overrides with `"config:":`, `"packages:":`, but that
also drops the defaults config, which would have to be repeated, which
is undesirable, especially the lengthy packages.yaml.
An example use case is: having config in this folder:
```
/path/to/programming/environment/{version}/{compilers,packages}.yaml
```
and have `module load spack-system-config` set the variable
```
SPACK_SYSTEM_CONFIG_PATH=/path/to/programming/environment/{version}
```
where the user no longer has to worry about what `{version}` they are
on.
**Continuous integration**
Finally, there is the use case of continuous integration, which may
clone an arbitrary Spack version, which optimally should not pick up
system or user config from the previous run (like may happen in
classical bare metal non-containerized filesystem side effect ridden
jenkins pipelines). In fact this is very similar to how spack itself
tries to avoid picking up system dependencies during builds...
**But environments solve this?**
- You could do `include`s in environment files to get similar behavior
to the spack_system_config_path example, but environments require you
to:
1) require paths to individual config files, not directories.
2) fail if the listed config file does not exist
- They allow you to override config scopes, but this is generally too
rigurous, as it requires you to repeat the default config, in
particular packages.yaml, and just defies the point of layered config.
Co-authored-by: Tom Scogland <tscogland@llnl.gov>
Co-authored-by: Tim Fuller <tjfulle@sandia.gov>
Co-authored-by: Steve Leak <sleak@lbl.gov>
Co-authored-by: Todd Gamblin <tgamblin@llnl.gov>
Any spec satisfying a default will be symlinked to `default`
If multiple specs have modulefiles in the same directory and satisfy
configured module defaults, then whichever was written last will be
default.
Use of `-R` flag to CTest command causes "empty-14" test to run,
by matching "empty", before the empty-14 target is built.
Patch CTest command in buildscript to match name exactly.
* [geant4] depends_on vecgeom@1.1.8:1.1 range
While previous versions were unclear, the [geant4.10.7 release notes](https://geant4-data.web.cern.ch/ReleaseNotes/ReleaseNotes4.10.7.html) indicate that vecgeom@1.1.8 is a minimum required version, not an exact required version ("Set VecGeom-1.1.8 as minimum required version for optional build with VecGeom."). This will allow some more freedom on the concretizer solutions while allowing geant4 to take advantage of bugfixes and improvements in vecgeom.
* [vecgeom] new version 1.1.17
* For py-torch: Also update dependencies: many version constraints
with an upper bound of @1.9 are now open (e.g. `@1.8.0:1.9` is
converted to `@1.8.0:`).
* For py-torchvision: Also add 0.11.0 and update ^pil constraint
to avoid building with 8.3.0
This PR permits to specify the `url` and `ref` of the Spack instance used in a container recipe simply by expanding the YAML schema as outlined in #20442:
```yaml
container:
images:
os: amazonlinux:2
spack:
ref: develop
resolve_sha: true
```
The `resolve_sha` option, if true, verifies the `ref` by cloning the Spack repository in a temporary directory and transforming any tag or branch name to a commit sha. When this new ability is leveraged an additional "bootstrap" stage is added, which builds an image with Spack setup and ready to install software. The Spack repository to be used can be customized with the `url` keyword under `spack`.
Modifications:
- [x] Permit to pin the version of Spack, either by branch or tag or sha
- [x] Added a few new OSes (centos:8, amazonlinux:2, ubuntu:20.04, alpine:3, cuda:11.2.1)
- [x] Permit to print the bootstrap image as a standalone
- [x] Add documentation on the new part of the schema
- [x] Add unit tests for different use cases
* [pkg][new version] Provide eospac@6.5.0 and mark it as default.
* Merge in changes found in #21629
* Mark all alpha/beta versions as deprecated.
- Addresses @sethrj's recommendation
- Also add a note indicated why these versions are marked this way.
1. Currently it prints not just the spec name, but the dependencies +
their variants + their compilers + their architectures + ...
2. It's clear from the context what spec the message applies to, so,
let's not print the spec at all.
These three rules in `concretize.lp` are overly complex:
```prolog
:- not provider(Package, Virtual),
provides_virtual(Package, Virtual),
virtual_node(Virtual).
```
```prolog
:- provides_virtual(Package, V1), provides_virtual(Package, V2), V1 != V2,
provider(Package, V1), not provider(Package, V2),
virtual_node(V1), virtual_node(V2).
```
```prolog
provider(Package, Virtual) :- root(Package), provides_virtual(Package, Virtual).
```
and they can be simplified to just:
```prolog
provider(Package, Virtual) :- node(Package), provides_virtual(Package, Virtual).
```
- [x] simplify virtual rules to just one implication
- [x] rename `provides_virtual` to `virtual_condition_holds`
fixes#26866
This semantics fits with the way Spack currently treats providers of
virtual dependencies. It needs to be revisited when #15569 is reworked
with a new syntax.
* gcc: support runtime ability to not install spack rpaths
Fixes#26582 .
* gcc: Fix malformed specs file and add docs
The updated docs point out that the spack-modified GCC does *not*
follow the usual behavior of LD_RUN_PATH!
* gcc: fix bad rpath on macOS
This bug has been around since the beginning of the GCC package file:
the rpath command it generates for macOS writes a single (invalid)
rpath entry.
* gcc: only write rpaths for directories with shared libraries
The original lib64+lib was just a hack for "in case either has one" but
it's easy to tell whether either has libraries that can be directly
referenced.
* py-vermin: add latest version 1.3.1
* Exclude line from Vermin since version is already being checked for
Vermin 1.3.1 finds that `encoding` kwarg of builtin `open()` requires Python 3+.
* Update py-aiohttp to 3.7.4 and py-chartdet to 4.0
* Changes from review
* Update package.py
* Update var/spack/repos/builtin/packages/py-chardet/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
The OS should only interpret shebangs, if a file is executable.
Thus, there should be no need to modify files where no execute bit is set.
This solves issues that are e.g. encountered while packaging software as
COVISE (https://github.com/hlrs-vis/covise), which includes example data
in Tecplot format. The sbang post-install hook is applied to every installed
file that starts with the two characters #!, but this fails on the binary Tecplot
files, as they happen to start with #!TDV. Decoding them with UTF-8 fails
and an exception is thrown during post_install.
Co-authored-by: Martin Aumüller <aumuell@reserv.at>
This commit contains changes to support Google Cloud Storage
buckets as mirrors, meant for hosting Spack build-caches. This
feature is beneficial for folks that are running infrastructure on
Google Cloud Platform. On public cloud systems, resources are
ephemeral and in many cases, installing compilers, MPI flavors,
and user packages from scratch takes up considerable time.
Giving users the ability to host a Spack mirror that can store build
caches in GCS buckets offers a clean solution for reducing
application rebuilds for Google Cloud infrastructure.
Co-authored-by: Joe Schoonover <joe@fluidnumerics.com>
* scr/veloc: component releases
Update the ECP-VeloC component packages in preparation for an
upcoming scr@3.0rc2 release.
All
- Add new release versions
- Add new `shared` variant for all components
- Add zlib link dependency to packages that were missing it
- Add maintainers
- Use self.define and self.define_from_variant to clean up cmake_args
axl
- Add independent vendor async support variants
rankstr
- Update older version sha that fails checksum on install
* Fix scr build error
Lock dependencies for scr@3.0rc1 to the versions released at the same
time.
* py-neurokit2: add 0.1.4.1
* Update var/spack/repos/builtin/packages/py-neurokit2/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update cray architecture detection for milan
Update the cray architecture module table with x86-milan -> zen3
Make cray architecture more robust to back off from frontend
architecture to a recent ancestor if necessary. This should make
future cray updates less paingful for users.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
Co-authored-by: Todd Gamblin <gamblin2@llnl.gov>
1. Don't use 16 digits of precision for the seconds, round to 2 digits after the comma
2. Don't print if we don't concretize (i.e. `spack concretize` without `-f` doesn't have to tell me it did nothing in `0.00` seconds)
* Speed-up environment concretization with a process pool
We can exploit the fact that the environment is concretized
separately and use a pool of processes to concretize it.
* Add module spack.util.parallel
Module includes `pool` and `parallel_map` abstractions,
along with implementation details for both.
* Add a new hash type to pass specs across processes
* Add tty msg with concretization time
We use POSIX `patch` to apply patches to files when building, but
`patch` by default prompts the user when it looks like a patch
has already been applied. This means that:
1. If a patch lands in upstream and we don't disable it
in a package, the build will start failing.
2. `spack develop` builds (which keep the stage around) will
fail the second time you try to use them.
To avoid that, we can run `patch` with `-N` (also called
`--forward`, but the long option is not in POSIX). `-N` causes
`patch` to just ignore patches that have already been applied.
This *almost* makes `patch` idempotent, except that it returns 1
when it detects already applied patches with `-N`, so we have to
look at the output of the command to see if it's safe to ignore
the error.
- [x] Remove non-POSIX `-s` option from `patch` call
- [x] Add `-N` option to `patch`
- [x] Ignore error status when `patch` returns 1 due to `-N`
- [x] Add tests for applying a patch twice and applying a bad patch
- [x] Tweak `spack.util.executable` so that it saves the error that
*would have been* raised with `fail_on_error=True`. This lets
us easily re-raise it.
Co-authored-by: Greg Becker <becker33@llnl.gov>
* py-magic: delete redundant package
This package is actually named py-python-magic (since the project itself
is "python-magic").
* New package: libmagic
* Py-python-magic: add required runtime dependency on libmagic and new version
* Py-filemagic: add required runtime dependency
* py-magic: restore and mark as redundant
This reverts commit 4cab7fb69e.
* file: add implicit dependencies and static variant
Replaces redundant libmagic that I added. Compression headers were previously
being picked up from the system.
* Fix py-python-magic dependency
* Update python version requirements
* relocate: call install_name_tool less
* zstd: fix race condition
Multiple times on my mac, trying to install in parallel led to failures
from multiple tasks trying to simultaneously create `$PREFIX/lib`.
* PackageMeta: simplify callback flush
* Relocate: use spack.platforms instead of platform
* Relocate: code improvements
* fix zstd
* Automatically fix rpaths for packages on macOS
* Only change library IDs when the path is already in the rpath
This restores the hardcoded library path for GCC.
* Delete nonexistent rpaths and add more testing
* Relocate: Allow @executable_path and @loader_path
* downgrade_docutils_version
* invalid version
* Update requirements.txt
* Improve spelling and shorten the reference link
* Update spack.yaml
* update version requirement
* update version to maximum of 0.16
Co-authored-by: bernhardkaindl <43588962+bernhardkaindl@users.noreply.github.com>
* py-jupytext: add new package
* Apply suggestions from code review
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* update jupytext dependencies
* Apply suggestions from code review
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* py-jupytext: remove py-jupyerlab dependency
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* py-gevent: add version 1.5
* py-gevent: update dependencies for v1.5.0
* Apply suggestions from code review
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-gevent/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* phist: Prefer 1.9.5 (1.9.6 uses mpi_f08, but not available in CI)
* phist: remove dupe of 1.9.5, missing preferred=True
Also, for 1.9.6, patch the (most, one does not work) tests to use
Currently Spack keeps track of the origin in the code of any
modification to the environment variables. This is very slow
and enabled unconditionally even in code paths where the
origin of the modification is never queried.
The only place where we inspect the origins of environment
modifications is before we start a build, If there's an override
of the type `e.set(...)` after incremental changes like
`e.append_path(..)`, which is a "suspicious" change.
This is very rare though.
If an override like this ever happens, it might mean a package is
broken. If that leads to build errors, we can just ask the user to run
`spack -d install ...` and check the warnings issued by Spack to find
the origins of the problem.
UPP and ncep-post are the same package, so this PR
removes the duplication.
ncep-post was originally named after the upstream repo
that now changed its name to UPP.
It can be frustrating to successfully run `spack test run --alias <name>` only to find you cannot get the results because you already use `<name>` in some previous stand-alone test execution. This PR prevents that from happening.
Primary fix:
Due to a typo in a version range, overlapping PR merges resulted
in a build failure of the latest version:
Don't attempt to remove a non-existing file for version 1.9.6.
Secondary fixes:
update_tpetra_gotypes.patch was mentioned twice, and the version
range has to exclude @1.4.2, to which it cannot be applied.
Add depend_on() py-pytest, py-numpy and pkgconfig with type='test'
@:1.9.0 fail with 'Rank mismatch with gfortran@10:, add a conflicts().
raise InstallError('~mpi not possible with kernel_lib=builtin!')
when applicable.
Fixes for spack install --test=root phist:
mpiexec -n12 puts a lot of stress on a pod and gets stuck in a loop
very often: Reduce the mpiexec procs and the number of threads.
Remove @run_after('build') @on_package_attributes(run_tests=True):
from 'def check()': fixes it from getting called twice
The build script of 'make test_install' for the installcheck expects
the examples to be copied to self.stage.path: Provide them.
* updating the recipe for betterment
* addressing the suggesions received from reviewers
* adding package helper macros
Co-authored-by: mohan002 <mohbabul@amd.com>
Using the Spec.constrain method doesn't work since it might
trigger a repository lookup which could break our directives
and triggers a circular import error.
To fix that we introduce a function to merge abstract anonymous
specs, based only on package names, which does not perform any
lookup in the repository.
Add missing pkgconfig to openslide and its dep perl-alien-libxml2.
Fix shared-mime-info to be a runtime dependency of gdk-pixbuf,
Otherwise, configure cannot detect use gdk-pixbuf without error.
* SEACAS: add a Faodel variant
* Use safer CMake and variant packages instead of directly adding parameters
Add a "+faodel ~mpi" dependency to balance "+faodel +mpi"
The buildcache is now extracted in a temporary folder within the current store,
moved to its final place and relocated.
"spack clean -s" has been extended to also clean the temporary extraction directory.
Add hardlinks with absolute paths for libraries in the corge, garply and quux packages
to detect incorrect handling of hardlinks in tests.
Problem: Flux expects the `FLUX_PMI_LIBRARY_PATH` to point directly at
the `libpmi.so` installed by Flux. When the env var is unset,
prepending to it results in this behavior. In the rare case that the
env var is already set, then the spack `libpmi.so` gets prepended with a
`:`, which Flux then attempts to interpret as a single path.
Solution: don't prepend to the path, instead set the path to point to
the `libpmi.so` (which will be undone when Flux is unloaded).
* flux-core: remove deprecated environment variables
The earliest checksummed version in this package is 0.15.0. As of
0.12.0, wreck (and its associated paths) no longer exist in Flux. As of
0.13.0, the `FLUX_RCX_PATH` variables are no longer used. So clean up
these env vars from the `setup_run_environment`.
gromacs@2018:2020.6 is fixed to build with gcc@11.2.0
by adding #include <limits> to a few header files.
Thanks to Maciej Wójcik <w8jcik@gmail.com> for testing versions.
The `find` command was missing for the examples forcing colorized output. Without this (or another suitable) command, spack produces output that is not using any color. Thus, without the `find` command one does not see any difference between forced colorized and non-colorized output.
There was a bug in 2.36.* of missing Makefile dependencies. The
previous workaround was to require 2.36 to be built serially. This is
now fixed upstream in 2.37 and this PR adds the patch to restore
parallel make to 2.36.
* py-niworkflows: add new package
* Update var/spack/repos/builtin/packages/py-niworkflows/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* remove unnecessary comment
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* py-nistats: add new package
* Update var/spack/repos/builtin/packages/py-nistats/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* remove `conflicts`
* remove test dependencies
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
when deployed on kubernetes, the server sends back permanent redirect responses.
This is elegantly handled by the requests library, but not urllib that we have
to use here, so I have to manually handle it by parsing the exception to
get the Location header, and then retrying the request there.
Signed-off-by: vsoch <vsoch@users.noreply.github.com>
* packages/phist, re #26002: force phist to use MPI compiler wrappers (copied from trilinos package)
* packages/phist re #26002, use cmake-provded FindMPI module only
* packages/phist source code formatting
* packages/phist: set MPI_HOME rather than MPI_BASE_DIR, thanks @sethri.
* phist: delete own FindMPI.cmake for older versions (rather than patching it away)
* packages/phist: remove blank line
* phist: adjust sorting of imports
* phist: change order of imports
The ASP-based solver maximizes the number of values in multi-valued
variants (if other higher order constraints are met), to avoid cases
where only a subset of the values that have been specified on the
command line or imposed by another constraint are selected.
Here we swap the priority of this optimization target with the
selection of the default providers, to avoid unexpected results
like the one in #26598
Seems like https://bugs.python.org/issue29699 is relevant. Better to
just ignore errors when removing them tmpdir. The OS will remove it
anyways.
Errors are happening randomly from tests that are using this fixture.
TL;DR: there are matching groups trying to match 1 or more occurrences of
something. We don't use the matching group. Therefore it's sufficient to test
for 1 occurrence. This reduce quadratic complexity to linear time.
---
When parsing logs of an mpich build, I'm getting a 4 minute (!!) wait
with 16 threads for regexes to run:
```
In [1]: %time p.parse("mpich.log")
Wall time: 4min 14s
```
That's really unacceptably slow...
After some digging, it seems a few regexes tend to have `O(n^2)` scaling
where `n` is the string / log line length. I don't think they *necessarily*
should scale like that, but it seems that way. The common pattern is this
```
([^:]+): error
```
which matches `: error` literally, and then one or more non-colons before that. So
for a log line like this:
```
abcdefghijklmnopqrstuvwxyz: error etc etc
```
Any of these are potential group matches when using `search` in Python:
```
abcdefghijklmnopqrstuvwxyz
bcdefghijklmnopqrstuvwxyz
cdefghijklmnopqrstuvwxyz
⋮
yz
z
```
but clearly the capture group should return the longest match.
My hypothesis is that Python has a very bad implementation of `search`
that somehow considers all of these, even though it can be implemented
in linear time by scanning for `: error` first, and then greedily expanding
the longest possible `[^:]+` match to the left. If Python indeed considers
all possible matches, then with `n` matches of length `1 .. n` you
see the `O(n^2)` slowness (i verified this by replacing + with {1,k}
and doubling `k`, it doubles the execution time indeed).
This PR fixes this by removing the `+`, so effectively changing the
O(n^2) into a O(n) worst case.
The reason we are fine with dropping `+` is that we don't use the
capture group anywhere, so, we just ensure `:: error` is not a match
but `x: error` is.
After going from O(n^2) to O(n), the 15MB mpich build log is parsed
in `1.288s`, so about 200x faster.
Just to be sure I've also updated `^CMake Error.*:` to `^CMake Error`,
so that it does not match with all the possible `:`'s in the line.
Another option is to use `.*?` there to make it quit scanning as soon as
possible, but what line that starts with `CMake Error` that does not have
a colon is really a false positive...
Installing packages with a lot of dependencies does not have an easy way
of judging the current progress (apart from running `spack spec -I pkg`
in another terminal). This change allows Spack to update the terminal's
title with status information, including its current progress as well as
information about the current and total number of packages.
* kahip: update to cmake for v3.11, retain scons for older versions
* kahip: update build system to cmake for v3.11, retain SCons for older versions
* address PR comments and add maintainer
* address PR comments - correct version to 2.10, add deprecated and url, and remove scons version
- Do not store the full list of environment variables in
<prefix>/.spack/spack-build-env.txt because it may contain user secrets.
- Only store environment variable modifications upon installation.
- Variables like PATH may still contain user and system paths to make
spack-build-env.txt sourceable. Variables containing paths are
modified through prepending/appending, and if we don't apply these
to the current environment variable, we end up with statements like
`export PATH=/path/to/spack/bin` with system paths missing, meaning
no system binaries are in the path, which is a bad user experience.
- Do write the full environment to spack-build-env.txt in the staging dir,
but ensure it is readonly for the current user, to make it a bit safer
on shared systems.
Creates an environment in a temporary directory and activates it, which
is useful for a quick ephemeral environment:
```
$ spack env activate -p --temp
[spack-1a203lyg] $ spack add zlib
==> Adding zlib to environment /tmp/spack-1a203lyg
==> Updating view at /tmp/spack-1a203lyg/.spack-env/view
```
PR #25904 moved the `--with-tcl` option to only older versions. However,
without this option, the build breaks:
```
checking for Tcl configuration... configure: error: Can't find Tcl configuration definitions. Use --with-tcl to specify a directory containing tclConfig.sh
```
The DB should be what is trusted for certain operations.
If it is not present when read we should assume the
corresponding store is empty, rather than trying a
write operation during a read.
* Add a unit test
* Document what needs to be there in tests
* py-twisted,py-storm: dep on zope.interface, bump storm version
py-twisted and py-storm's import tests need zope.interface.
py-storm: Use pypi and add version 0.25. It didn't change reqs.
zope.infterface@4.5.0 imports removed Feature: Use setuptools@:45
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* py-storm: all deps updated with type=('build', 'run')
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* py-bcrypt, py-bleach, py-decorator, py-pygdal: fix python dependency
* Update var/spack/repos/builtin/packages/py-bleach/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* py-matplotlib: fix 3.4.3
* Update var/spack/repos/builtin/packages/py-matplotlib/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* py-keras-preprocessing: Add missing deps: six@1.9.0: and numpy@1.9.1:
Add deps: pip download --no-binary :all: keras-preprocessing==1.1.2
Collecting numpy>=1.9.1
Installing build dependencies: started
Collecting six>=1.9.0
* Update var/spack/repos/builtin/packages/py-keras-preprocessing/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
When a symlink to a license file exists but is broken, the license symlink post-install hook fails
because os.path.exists() checks the existence of the target not the symlink itself.
os.path.lexists() is the proper function to use.
* visit: add an external find function (determine_version)
* visit: correct too long comment line
* visit: forgot to set executables
* visit: external find uses signgle dash version
* visit: found as external asking visit version
* fish: adding version 3.3.1
* adding maintainer
* Update var/spack/repos/builtin/packages/fish/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
The most recent release of numactl (2.0.14) fails to build on riscv64
because of a missing "-latomic". This patch from upstream resolves this
issue. It can be dropped once the next version of numactl is released.
Environments push/pop scopes upon activation. If some lazily
evaluated value depending on the current configuration was
computed and cached before the scopes are pushed / popped
there will be an inconsistency in the current state.
This PR fixes the issue for stores, but it would be better
to move away from global state.
The `spack.architecture` module contains an `Arch` class that is very similar to `spack.spec.ArchSpec` but points to platform, operating system and target objects rather than "names". There's a TODO in the class since 2016:
abb0f6e27c/lib/spack/spack/architecture.py (L70-L75)
and this PR basically addresses that. Since there are just a few places where the `Arch` class was used, here we query the relevant platform objects where they are needed directly from `spack.platforms`. This permits to clean the code from vestigial logic.
Modifications:
- [x] Remove the `spack.architecture` module and replace its use by `spack.platforms`
- [x] Remove unneeded tests
* Use gnuconfig package for config file replacement for RISC-V.
This extends the changes in #26035 to handle RISC-V. Before this change,
many packages fail to configure on riscv64 due to config.guess being too
old to know about RISC-V. This is seen out of the box when clingo fails
to build from source due to pkgconfig failing to configure, throwing
error: "configure: error: cannot guess build type; you must specify one".
* Add riscv64 architecture
* Update vendored archspec from upstream project.
These archspec updates include changes needed to support riscv64.
* Update archspec's __init__.py to reflect the commit hash of archspec being used.
Cherry-picked from #25564 so this is standalone.
With this PR we can activate an environment in Spack itself, without computing changes to environment variables only necessary for "shell aware" env activation.
1. Activating an environment:
```python
spack.environment.activate(Environment(xyz)) -> None
```
this basically just sets `_active_environment` and modifies some config scopes.
2. Activating an environment **and** getting environment variable modifications for the shell:
```python
spack.environment.shell.activate(Environment(xyz)) -> EnvironmentModifications
```
This should make it easier/faster to do unit tests and scripting with spack, without the cli interface.
* Isolate bootstrap configuration from user configuration
* Search for build dependencies automatically if bootstrapping from sources
The bootstrapping logic will search for build dependencies
automatically if bootstrapping anything form sources. Any
external spec, if found, is written in a scope that is specific
to bootstrapping.
* Don't clean the bootstrap store with "spack clean -a"
* Copy bootstrap.yaml and config.yaml in the bootstrap area
Reverting from CMake to Make install caused
`-install_path=/usr/local/lib/libzstd.1.dylib` to be hardcoded into the
zstd. Now we explicitly pass the PREFIX into the build command so that
the correct spack install path is saved.
Fixes#26438 and also the ROOT install issue I had :)
- [x] Our wrapper error messages are sometimes hard to differentiate from other build
output, so prefix all errors from `die()` with '[spack cc] ERROR:'
- [x] The error we raise when running, say, `fc` without a Fortran compiler was not
clear enough. Clarify the message and the comment.
This converts everything in cc to POSIX sh, except for the parts currently
handled with bash arrays. Tests are still passing.
This version tries to be as straightforward as possible. Specifically, most conversions
are kept simple -- convert ifs to ifs, handle indirect expansion the way we do in
`setup-env.sh`, only mess with the logic in `cc`, and don't mess with the python code at
all.
The big refactor is for arrays. We can't rely on bash's nice arrays and be ignorant of
separators anymore. So:
1. To avoid complicated separator logic, there are three types of lists. They are:
* `$lsep`-separated lists, which end with `_list`. `lsep` is customizable, but we
picked `^G` (alarm bell) for `$lsep` because it's ASCII and it's unlikely that it
would actually appear in any arguments. If we need to get fancier (and I will lose
faith in the world if we do) then we could consider XON or XOFF.
* `:`-separated directory lists, which end with `_dirs`, `_DIRS`, `PATH`, or `PATHS`
* Whitespace-separated lists (like flags), which can have any other name.
Whitespace and colon-separated lists come with the territory with PATHs from env
vars and lists of flags. `^G` separated lists are what we use for most internal
variables, b/c it's more likely to work.
2. To avoid subshells, use a bunch of functions that do dirty `eval` stuff instead. This
adds 3 functions to deal with lists:
* `append LISTNAME ELEMENT [SEP]` will put `ELEMENT` at the end of the list called
`LISTNAME`. You can optionally say what separator you expect to use. Note that we
are taking advantage of everything being global and passing lists by name.
* `prepend LISTNAME ELEMENT [SEP]` like append, but puts `ELEMENT` at the start of
`LISTNAME`
* `extend LISTNAME1 LISTNAME2 [PREFIX]` appends everything in LISTNAME2 to
LISTNAME1, and optionally prepends `PREFIX` to every element (this is useful for
things like `-I`, `-isystem `, etc.
* `preextend LISTNAME1 LISTNAME2 [PREFIX]` prepends everything in LISTNAME2 to
LISTNAME1 in order, and optionally prepends `PREFIX` to every element.
The routines determine the separator for each argument by its name, so we don't have to
pass around separators everywhere. Amazingly, as long as you do not expand variables'
values within an `eval` environment, you can do all this and still preserve quoting.
When iterating over lists, the user of this API still has to set and unset `IFS`
properly.
We ended up having to ignore shellcheck SC2034 (unused variable), because using evals
all over the place means that shellcheck doesn't notice that our list variables are
actually used.
So far this is looking pretty good. I took the most complex unit test I could find
(which runs a sample link line) and ran the same command line 200 times in a shell
script. Times are roughly as follows:
For this invocation:
```console
$ bash -c 'time (for i in `seq 1 200`; do ~/test_cc.sh > /dev/null; done)'
```
I get the following performance numbers (the listed shells are what I put in `cc`'s
shebang):
**Original**
* Old version of `cc` with arrays and `bash v3.2.57` (macOS builtin): `4.462s` (`.022s` / call)
* Old version of `cc` with arrays and `bash v5.1.8` (Homebrew): `3.267s` (`.016s` / call)
**Using many subshells (#26408)**
* with `bash v3.2.57`: `25.302s` (`.127s` / call)
* with `bash v5.1.8`: `27.801s` (`.139s` / call)
* with `dash`: `15.302s` (`.077s` / call)
This version didn't seem to work with zsh.
**This PR (no subshells)**
* with `bash v3.2.57`: `4.973s` (`.025s` / call)
* with `bash v5.1.8`: `4.984s` (`.025s` / call)
* with `zsh`: `2.995s` (`.015s` / call)
* with `dash`: `1.890s` (`.0095s` / call)
Dash, with the new posix design, is easily the winner.
So there are several interesting things to note here:
1. Running the posix version in `bash` is slower than using `bash` arrays. That is to be
expected because it's doing a bunch of string processing where it likely did not have
to before, at least in `bash`.
2. `zsh`, at least on macOS, is significantly faster than the ancient `bash` they ship
with the system. Using `zsh` with the new version also makes the posix wrappers
faster than `develop`. So it's worth preferring `zsh` if we have it. I suppose we
should also try this with newer `bash` on Linux.
3. `bash v5.1.8` seems to be significantly faster than the old system `bash v3.2.57` for
arrays. For straight POSIX stuff, it's a little slower. It did not seem to matter
whether `--posix` was used.
4. `dash` is way faster than `bash` or `zsh`, so the real payoff just comes from being
able to use it. I am not sure if that is mostly startup time, but it's significant.
`dash` is ~2.4x faster than the original `bash` with arrays.
So, doing a lot of string stuff is slower than arrays, but converting to posix seems
worth it to be able to exploit `dash`.
- [x] Convert all but array-related portions to sh
- [x] Fix basic shellcheck issues.
- [x] Convert arrays to use a few convenience functions: `append` and `extend`
- [x] Get `cc` tests passing.
- [x] Add `cc` tests where needed passing.
- [x] Benchmarking.
Co-authored-by: Tom Scogland <scogland1@llnl.gov>
Co-authored-by: Danny McClanahan <1305167+cosmicexplorer@users.noreply.github.com>
* Add version 0.12.1
* Add variant to build with C++11 standard
build with c++11 standard requires boost threads, and needs explicit setting of
CMAKE_CXX_STANDARD
* intel-tbb: install pkgconfig file
* intel-tbb: install pkgconfig file when @:2021.2.0
* intel-tbb: add blank line
* intel-tbb: fix library name to refer
* intel-tbb: fix library name to refer again
* intel-tbb: use self.prefix.lib.pkgconfig
From the gnupg.org website:
> GnuPG 1.4 is the old, single binary version which still support the
> unsafe PGP-2 keys. However, it lacks many modern features and will
> receive only important updates.
I'm starting to appreciate gpg1 more, because it is relocatable (gng2
has hard-coded paths to gpg-agent and other tools) and it does not
require gpg-agent at all.
* graph500: added option -fcommon for gcc@10.2:, otherwise failed to build with "multiple definition of `column'"
* graph500: moved setting cflag to flag_handler
Work around issues in older hdf5 build and overzealous build flags:
```
>> 1420 /var/folders/j4/fznvdyhx4875h6fhkqjn2kdr4jvyqd/T/9te/spack-stage/spack-stage-hdf5-1.10.4-feyl6tz6hpx5kl7m33avpuacwje2ubul/spack-src/src/H5Odeprec.c:141:8: error: implicit decl
aration of function 'H5CX_set_apl' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
```
The older patch does not apply so the build ends up failing:
```
1539 In file included from /private/var/folders/fy/x2xtwh1n7fn0_0q2kk29xkv9vvmbqb/T/s3j/spack-stage/spack-stage-python-3.8.11
-6jyb6sxztfs6fw26xdbc3ktmbtut3ypr/spack-src/Modules/_tkinter.c:48:
>> 1540 /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/usr/include/tk.h:86:11: f
atal error: 'X11/Xlib.h' file not found
1541 # include <X11/Xlib.h>
1542 ^~~~~~~~~~~~
1543 1 error generated.
```
* Explicitly set path to Kokkos for ArborX testing
* Improve formatting
* Update var/spack/repos/builtin/packages/arborx/package.py
Co-authored-by: Seth R. Johnson <johnsonsr@ornl.gov>
* Remove blank line
Co-authored-by: Seth R. Johnson <johnsonsr@ornl.gov>
* -fallow-argument-mismatch flag added when compiling with GCC to avoid a compilation error when using a GCC version > 10.0.
Co-authored-by: Haz99 <jsalamerosanz@gmail.com>
* Filtered every occurrence of "!$OMP SIMD SAFELEN(LVEC2)" when compiling with nvhcp to avoid a compilation error.
Co-authored-by: Haz99 <jsalamerosanz@gmail.com>
* Line with more than 80 characters split into multiple lines.
Co-authored-by: Haz99 <jsalamerosanz@gmail.com>
When using modules for compiler (and/or external package), if a
package's `setup_[dependent_]build_environment` sets `PYTHONHOME`, it
can influence the python subprocess executed to gather module
information.
The error seen was:
```
json.decoder.JSONDecodeError: Expecting value: line 1 column 1 (char 0)
```
But the actual hidden error happened in the `python -c 'import
json...'` subprocess, which made it return an empty string as json:
```
ModuleNotFoundError: No module named 'encodings'
```
This fix uses `python -E` to ignore `PYTHONHOME` and
`PYTHONPATH`. Should be safe here because the python subprocess code
only use packages built-in python.
The python subprocess in `environment.py` was also patched to be safe
and consistent.
* Remove redundant preserve environment code in build environment
* Remove fix for a bug in a module
See https://github.com/spack/spack/issues/3153#issuecomment-280460041,
this shouldn't be part of core spack.
* Don't module unload cray-libsci on all platforms
Spack has logic to preserve an installation prefix when it is being
overwritten: if the new install fails, the old files are restored.
This PR adds error handling for when this backup restoration fails
(i.e. the new install fails, and then some unexpected error prevents
restoration from the backup).
* Remove vestigial code to be compatible with Spack v0.9.X
* ArchSpec: reworked __repr__ to be more adherent to common Python idioms
* ArchSpec: simplified __init__.py and copy()
closes #26354 and #26358
Previously we did not pass paths for GDB or GMP and ./configure would
get confused about which one to pull from. Be more specific.
Built with all variants enabled and fixed the fixable versions and variants:
@:8.1 were fixable by limiting python versions for these to @:3.6.
7.10.1 and 7.11(.1) were fixable to build with glibc-2.25 and newer
using two long patches.
gdb 7.8 and 7.9 weren't fixable as there is no backport if the fix
to build these with glibc-2.25 and newer:
http://lists.busybox.net/pipermail/buildroot/2017-March/188055.html
Co-authored-by: Bernhard Kaindl <bernhardkaindl7@gmail.com>
Modifications:
- Modify the workflow to build container images without pushing when the workflow file itself is modified
- Strip the leading ghcr.io/spack/ from env.container env.versioned to prepare pushing to multiple registries
- Fixed CentOS 7 and Amazon Linux builds
- Login and push to Docker Hub as well as Github Action
- Add a badge to README.md with the status of docker images
- Specify CMake minimum version more precisely
- Ensure rocBLAS is available at build time
- Limit workaround for missing rocblas include path
to the only affected version (4.1.0)
- Make hip a build and link dependency
- Remove hip's link dependencies
Co-authored-by: Harmen Stoppels <harmenstoppels@gmail.com>
CMake 3.21.3 disables the broken hipcc-as-rocmclang detection again.
From the release notes:
> The AMD ROCm Platform hipcc compiler was identifed by CMake 3.21.0
> through 3.21.2 as a distinct compiler with id ROCMClang. This has been
> removed because it caused regressions. Instead:
> * hipcc may no longer be used as a HIP compiler because it interferes
> with flags CMake needs to pass to Clang. Use Clang directly.
> * hipcc may once again be used as a CXX compiler, and is treated as
> whatever compiler it selects underneath, as CMake 3.20 and below
> did.
* py-snappy: add patch to fix dependencies
* Update var/spack/repos/builtin/packages/py-snappy/req.patch
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* py-jupyter-packaging: add 0.7.12 and 0.10.6
* Update var/spack/repos/builtin/packages/py-jupyter-packaging/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-jupyter-packaging/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
The format of the HPE/Cray supplied module for cray-mvapich2 on HPE apollo systems is
very different from the cray-mpich module supplied on Cray EX and XE
systems.
Recent changes to the cray-mpich package -
https://github.com/spack/spack/pull/23470
broke support for cray-mvapich2 and relies now on the structure of the
cray-mpich module to work properly.
Rather than try to support two very different vendor mpich modules
using the same spack package, just add another one specialized for
the cray-mvapich2 module.
Signed-off-by: Howard Pritchard <hppritcha@gmail.com>
1. Changes the variant of openssl to `certs=mozilla/system/none` so that
users can pick whether they want Spack or system certs, or if they
don't want certs at all.
2. Keeps the default behavior of openssl to use certs=systems.
3. Changes the curl configuration to not guess the ca path during
config, but rather fall back to whatever the tls provider is
configured with. If we don't do this, curl will still pick up system
certs if it finds them.
As a minor fix, it also adds the build dep `pkgconfig` to curl, since
that's being used during the configure phase to get openssl compilation
flags.
* py-mock: fix depends of `@:2.0.0` and bump version
fixes the build of `py-gsutil`, it depends on `'py-mock@:2.0.0'`.
* Update var/spack/repos/builtin/packages/py-mock/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-mock/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Apply the other requested changes
* Add requested change: Add the python@3.6 for newer versions
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* seacas: new release and fixes for metis/parmetis
* Update to add sha256 checksum for latest seacas release
* Updated the documentation strings with new applications
* Fixed the metis/parmetis variants and logic depending on whether mpi
is enabled/disabled. (There is still a zoltan issue I need to fix,
but this will at least allow seacas to be built without
metis/parmetis or with +mpi+parmetis. The ~mpi+metis still needs
work elsewhere.)
* Enable cpup, slice, zellij in +applications
NetCDF-4.8.1 has been released.
As discussed in https://github.com/Unidata/netcdf-c/issues/2110
(netcdf-c-4.8.1.tar.gz not on ftp site... #2110), the canonical
download site for netCDF releases has been changed and the previous
ftp site is no longer available.
This PR updates the `url` to point to the new recommended download
site and updates the sha256 checksums for the new tar files.
* py-anuga: add git main version to support build with python@3.5:
py-anuga's main branch has been converted to Python-3 recently.
* py-triangle: use pypi, py-anuga: Fixed depends and test suite works now
* py-numba: add 0.54.0 and restrict old dependencies
* Update var/spack/repos/builtin/packages/py-numba/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* OpenSSL 3.0.0
* Remove openssl constraint in e4s to test 3.0.0
* Restrict openssl
* Restrict openssl to @:1 in unifyfs
* Revert "Remove openssl constraint in e4s to test 3.0.0"
This reverts commit 0f0355609771764280ab1b6a523c80843a4f85d6.
* Prefer 1.x
The logic to perform detection of already installed
packages has been extracted from cmd/external.py
and put into the spack.detection package.
In this way it can be reused programmatically for
other purposes, like bootstrapping.
The new implementation accounts for cases where the
executables are placed in a subdirectory within <prefix>/bin
The build needs `pkgconfig` and `openssl`, `m4` is already added by `autoconf`.
Also add the current version of `libp11` to the list of versions.
Co-authored-by: Bernhard Kaindl <bernhard.kaindl@ait.ac.at>
* Use gnuconfig package for config file replacement
Currently the autotools build system tries to pick up config.sub and
config.guess files from the system (in /usr/share) on arm and power.
This is introduces an implicit system dependency which we can avoid by
distributing config.guess and config.sub files in a separate package,
such as the new `gnuconfig` package which is very lightweight/text only
(unlike automake where we previously pulled these files from as a
backup). This PR adds `gnuconfig` as an unconditional build dependency
for arm and power archs.
In case the user needs a system version of config.sub and config.guess,
they are free to mark `gnuconfig` as an external package with the prefix
pointing to the directory containing the config files:
```yaml
gnuconfig:
externals:
- spec: gnuconfig@master
prefix: /tmp/tmp.ooBlkyAKdw/lol
buildable: false
```
Apart from that, this PR gives some better instructions for users when
replacing config files goes wrong.
* Mock needs this package too now, because autotools adds a depends_on
* Add documentation
* Make patch_config_files a prop, fix the docs, add integrations tests
* Make macOS happy
* py-datalad: move datalad wtf test over from py-datalad-metalad
* Update var/spack/repos/builtin/packages/py-datalad/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* [vbfnlo] Add doc variant to toggle building of docs
* [openloops] Add scons to dependencies
Make sure that the build_processes does not accidentally pick up a
non-suitable scons version from the underlying system
* [openloops] Set OLPYTHON to make sure the right scons is picked
* [openloops] Fix Flake8 style complaints
Workaround this compile error for gcc by adding -Wno-narrowing for it:
spindle_logd.cc:65:76: error: narrowing conversion of '255' from 'int' to 'char'
spindle_logd.cc:65:76: error: narrowing conversion of '223' from 'int' to 'char'
spindle_logd.cc:65:76: error: narrowing conversion of '191' from 'int' to 'char'
spindle 0.8.1 wants to compile tests with mpi.h, newer versions need mpicc,
thus add: depends_on("mpi"). Spindle supports the --no-mpi to disable MPI.
Fix the perl test case bug Perl/perl5#15544
Variable PATH longer than 1000 characters (as is usual with spack) fails a perl test case
The fix is: Don't test PATH in testcase perlbug.t
Fixes `spack install --test=all` for specs triggering a build and test of perl!
"Long long" is the default type when building trilinos on its own, and
many downstream packages (both in and out of spack) rely on it. E4S
already sets this explicitly to long_long.
When using the ONNX package inside of an environment that specifies a
python3 executable, it will attempt to use a system installed
version. This can lead to a failure where the system python and the
environment python don't agree and the system python ends up with an
invalid environment. Forces ONNX to use the same version of python as
the rest of the spec.
Co-authored-by: Greg Becker <becker33@llnl.gov>
Fix solving/concretizing candle-benchmarks:
py-theano: The requested variant +gpu us now named +cuda
opencv: The requested variants +python and +zlib are now fixed deps
- Match failed autotest tests show the word "FAILED" near the end
- Match "FAIL: ", "FATAL: ", "failed ", "Failed test" of other suites
- autotest " ok"$ means the test passed, independend of text before.
- autoconf messages showing missing tools are fatal later, show them.
dropwatch is a network packet drop checker and it's make check starts
a daemon which does not terminate.
- Skip this test to not block builds.
- Add depends_on('pkgconfig', type='build')
It is needed in case the host does not have pkg-config installed.
- Remove the depends_on('m4', type='build'):
The depends_on('autoconf', type='build') pulls m4 as it needs it.
When using Ubuntu's gcc-8.4.0 on Ubuntu 18.04 to compile rivet-3.1.3,
compilation errors related to UnstableParticles(), "UFS" show up.
Compilation with this compiler is fixed in rivet-3.1.4, adding it.
Adding type='link' to the depends on 'hepmc' and 'hepmc' fixes
the tests to find libHepMC.so.4 in `spack install --tests=all`
Co-authored-by: Valentin Volkl <valentin.volkl@cern.ch>
The cairo test suite is huge, has many backends and the README states
that running and attempting to pass it is not a goal for normal users,
it has so many dependencies into the system, including fonts, that
passing it is not a goal realistically in reach soon:
Skip it, it takes far too long to be practical.
Despite the patch disabling installation of rules, meson's setup
stage looks up the udev package to get `/lib/udev/rules.d`, but as
spack has no `systemd/udev` package, it would fail to build.
Fix such builds by passing `-Dudevrulesdir` and bump version to 3.10.5
* autotoolspackage.rst: No depends_on('m4') with depends_on('autoconf')
- Remove `m4` from the example depends_on() lines for the autoreconf phase.
- Change the branch used as example from develop to master as it is
far more common in the packages of spack's builtin repo.
- Fix the wrong info that libtoolize and aclocal are run explicitly
in the autoreconf phase by default. autoreconf calls these internally
as needed, thus autotools.py also does not call them directly.
- Add that autoreconf() also adds -I<aclocal-prefix>/share/aclocal.
- Add an example how to set autoreconf_extra_args.
- Add an example of a custom autoreconf phase for running autogen.sh.
Co-authored-by: Harmen Stoppels <harmenstoppels@gmail.com>
Based on the original script of R. Mijakovic further improvements of
GPI-2 installation, in particular different official versions,
configuration setups and even testing. Importantly, the non-autotools
way of installation for older versions is also considered, which is
relevant for some packages using GPI-2.
Co-authored-by: Arcesio Castaneda Medina <arcesio.castaneda.medina@itwm.fraunhofer.de>
xload failed with unresolved referenced to libintl functions:
Disabled it's use of gettext calls and added the last "new" version.
Co-authored-by: Bernhard Kaindl <bernhard.kaindl@ait.ac.at>
The hand-written `configure` script of this package does not handle
--without-<feature> at all. The source wants to use `lhapdf` headers
even if support of lhapdf is not indicated using `--with-lhapdf`.
Enable the variant `lhapdf` by default: It fixes the build of the
current package and provides the TauSpinner feature as well.
Fix the build for normal non-root/non-system-user builds, as we cannot
know that we'd have to uninstall these files even if installed as root.
Also add `pkgconfig` and remove not explicitly needed `depends_on('m4')`
* update the Tau package to use the correct ROCm dependencies and prefixes
1st:
When the rocm variant is selected, tau defaults to look for rocm in /opt/rocm
which is not guarenteed to be the correct location -- this has been fixed
to provide the prefix for hsa-rocr-dev (which is now a dependency when +rocm is
selected).
2nd:
the rocprofiler dependency package was not specified correctly, it should
be called rocprofiler-dev, also rocprofiler-dev is a dependency when
+rocprofiler is selected.
added roctracer support
w3m's build fails with `undefined reference to `RAND_egd'` which
is an deprecated insecure feature and from building japanese messages.
Disabling both makes the build of `w3m` work.
This commit shows a template for cut-and-paste into the package to fix it:
```py
==> fast-global-file-status: Executing phase: 'autoreconf'
==> Error: RuntimeError: Cannot generate configure: missing dependencies autoconf, automake, libtool.
Please add the following lines to the package:
depends_on('autoconf', type='build', when='@master')
depends_on('automake', type='build', when='@master')
depends_on('libtool', type='build', when='@master')
Update the version (when='@master') as needed.
```
Co-authored-by: Harmen Stoppels <harmenstoppels@gmail.com>
The build needs pkgconfig and lzma, m4 is already added by autoconf.
Disable generation of kmod manpages as spack does not have xsltproc yet.
Co-authored-by: Bernhard Kaindl <bernhard.kaindl@ait.ac.at>
Assimp searches for zlib (or builds its own version). When it searches, it can find a system install that is not provided by spack. Ref: d286aadbdf/CMakeLists.txt (L451)
Tumbleweed has been broken for a couple of days. The attempt
to fix it in #26170 didn't really work. Let's try to move to
a more stable release series for OpenSuse.
* Make libunwind optional
* Add support for sized_delete and debugalloc
Co-authored-by: Seth R. Johnson <johnsonsr@ornl.gov>
Co-authored-by: Harmen Stoppels <harmenstoppels@gmail.com>
Fix the build of pango and it's 20 dependents: Only provide the versions which
support the build using autotools (conversion to MesonPackage didn't progress)
This only restores the list of versions of August 10, before the build broke.
This adds lockfile tracking to Spack's lock mechanism, so that we ensure that there
is only one open file descriptor per inode.
The `fcntl` locks that Spack uses are associated with an inode and a process.
This is convenient, because if a process exits, it releases its locks.
Unfortunately, this also means that if you close a file, *all* locks associated
with that file's inode are released, regardless of whether the process has any
other open file descriptors on it.
Because of this, we need to track open lock files so that we only close them when
a process no longer needs them. We do this by tracking each lockfile by its
inode and process id. This has several nice properties:
1. Tracking by pid ensures that, if we fork, we don't inadvertently track the parent
process's lockfiles. `fcntl` locks are not inherited across forks, so we'll
just track new lockfiles in the child.
2. Tracking by inode ensures that referencs are counted per inode, and that we don't
inadvertently close a file whose inode still has open locks.
3. Tracking by both pid and inode ensures that we only open lockfiles the minimum
number of times necessary for the locks we have.
Note: as mentioned elsewhere, these locks aren't thread safe -- they're designed to
work in Python and assume the GIL.
Tasks:
- [x] Introduce an `OpenFileTracker` class to track open file descriptors by inode.
- [x] Reference-count open file descriptors and only close them if they're no longer
needed (this avoids inadvertently releasing locks that should not be released).
Spack's source mirror was previously in a plain old S3 bucket. That will still
work, but we can do better. This switches to AWS's CloudFront CDN for hosting
the mirror.
CloudFront is 16x faster (or more) than the old bucket.
- [x] change mirror to https://mirror.spack.io
This PR fixes two problems with clang/llvm's version detection. clang's
version output looks like this:
```
clang version 11.0.0
Target: x86_64-unknown-linux-gnu
```
This caused clang's version to be misdetected as:
```
clang@11.0.0
Target:
```
This resulted in errors when trying to actually use it as a compiler.
When using `spack external find`, we couldn't determine the compiler
version, resulting in errors like this:
```
==> Warning: "llvm@11.0.0+clang+lld+lldb" has been detected on the system but will not be added to packages.yaml [reason=c compiler not found for llvm@11.0.0+clang+lld+lldb]
```
Changing the regex to only match until the end of the line fixes these
problems.
Fixes: #19473
clean_environment(): Unset three more environment variables:
MAKEFLAGS: Affects make, can eg indirectly inhibit enabling parallel build
DISPLAY: Tests of GUI widget libraries might try to connect to an X server
TERM: Could make testsuites attempt to color their output
* Switch Umpire to CMakeCachedPackage
* Fix missing import
* Correct tests option in Umpire
* Switch RAJA to CachedCMakePackage
* Convert CHAI to CachedCMakePackage
* Corrections in RAJA
* Patches in Umpire & RAJA for BLT target export
* Fixup style
* Fixup incorrect use of cmake_cache_string
fixes#25992
Currently the bootstrapping process may need a compiler.
When bootstrapping from sources the need is obvious, while
when bootstrapping from binaries it's currently needed in
case patchelf is not on the system (since it will be then
bootstrapped from sources).
Before this PR we were searching for compilers as the
first operation, in case they were not declared in
the configuration. This fails in case we start
bootstrapping from within an environment.
The fix is to defer the search until we have swapped
configuration.
While debugging #24508, I noticed that we call `basename` in `cc`. The
same can be achieved by using Bash's parameter expansion, saving one
external process per call.
Parameter expansion cannot replace basename for directories in some
cases, but is guaranteed to work for executables.
Git 2.24 introduced a feature flag for repositories with many files, see:
https://github.blog/2019-11-03-highlights-from-git-2-24/#feature-macros
Since Spack's Git repository contains roughly 8,500 files, it can be
worthwhile to enable this, especially on slow file systems such as NFS:
```
$ hyperfine --warmup 3 'cd spack-default; git status' 'cd spack-manyfiles; git status'
Benchmark #1: cd spack-default; git status
Time (mean ± σ): 3.388 s ± 0.095 s [User: 256.2 ms, System: 625.8 ms]
Range (min … max): 3.168 s … 3.535 s 10 runs
Benchmark #2: cd spack-manyfiles; git status
Time (mean ± σ): 168.7 ms ± 10.9 ms [User: 98.6 ms, System: 126.1 ms]
Range (min … max): 144.8 ms … 188.0 ms 19 runs
Summary
'cd spack-manyfiles; git status' ran
20.09 ± 1.42 times faster than 'cd spack-default; git status'
```
* Add support for C++20 to HPX package
* Enable unity builds in HPX package when available
* Add support for HIP/ROCm to HPX package
* Rearrange and update required versions for HPX package
* Add C++20 option to asio package
Modifications:
- [x] Change `defaults/config.yaml`
- [x] Add a fix for bootstrapping patchelf from sources if `compilers.yaml` is empty
- [x] Make `SPACK_TEST_SOLVER=clingo` the default for unit-tests
- [x] Fix package failures in the e4s pipeline
Caveats:
1. CentOS 6 still uses the original concretizer as it can't connect to the buildcache due to issues with `ssl` (bootstrapping from sources requires a C++14 capable compiler)
1. I had to update the image tag for GitlabCI in e699f14.
1. libtool v2.4.2 has been deprecated and other packages received some update
This will allow a user to (from anywhere a Spec is parsed including both name and version) refer to a git commit in lieu of
a package version, and be able to make comparisons with releases in the history based on commits (or with other commits). We do this by way of:
- Adding a property, is_commit, to a version, meaning I can always check if a version is a commit and then change some action.
- Adding an attribute to the Version object which can lookup commits from a git repo and find the last known version before that commit, and the distance
- Construct new Version comparators, which are tuples. For normal versions, they are unchanged. For commits with a previous version x.y.z, d commits away, the comparator is (x, y, z, '', d). For commits with no previous version, the comparator is ('', d) where d is the distance from the first commit in the repo.
- Metadata on git commits is cached in the misc_cache, for quick lookup later.
- Git repos are cached as bare repos in `~/.spack/git_repos`
- In both caches, git repo urls are turned into file paths within the cache
If a commit cannot be found in the cached git repo, we fetch from the repo. If a commit is found in the cached metadata, we do not recompare to newly downloaded tags (assuming repo structure does not change). The cached metadata may be thrown out by using the `spack clean -m` option if you know the repo structure has changed in a way that invalidates existing entries. Future work will include automatic updates.
# Finding previous versions
Spack will search the repo for any tags that match the string of a version given by the `version` directive. Spack will also search for any tags that match `v + string` for any version string. Beyond that, Spack will search for tags that match a SEMVER regex (i.e., tags of the form x.y.z) and interpret those tags as valid versions as well. Future work will increase the breadth of tags understood by Spack
For each tag, Spack queries git to determine whether the tag is an ancestor of the commit in question or not. Spack then sorts the tags that are ancestors of the commit by commit-distance in the repo, and takes the nearest ancestor. The version represented by that tag is listed as the previous version for the commit.
Not all commits will find a previous version, depending on the package workflow. Future work may enable more tangential relationships between commits and versions to be discovered, but many commits in real world git repos require human knowledge to associate with a most recent previous version. Future work will also allow packages to specify commit/tag/version relationships manually for such situations.
# Version comparisons.
The empty string is a valid component of a Spack version tuple, and is in fact the lowest-valued component. It cannot be generated as part of any valid version. These two characteristics make it perfect for delineating previous versions from distances. For any version x.y.z, (x, y, z, '', _) will be less than any "real" version beginning x.y.z. This ensures that no distance from a release will cause the commit to be interpreted as "greater than" a version which is not an ancestor of it.
Signed-off-by: vsoch <vsoch@users.noreply.github.com>
Co-authored-by: vsoch <vsoch@users.noreply.github.com>
Co-authored-by: Gregory Becker <becker33@llnl.gov>
Co-authored-by: Todd Gamblin <tgamblin@llnl.gov>
This PR coincides with tiny changes to spack to support spack monitor using the new spec
the corresponding spack monitor PR is at https://github.com/spack/spack-monitor/pull/31.
Since there are no changes to the database we can actually update the current server
fairly easily, so either someone can test locally or we can just update and then
test from that (and update as needed).
Signed-off-by: vsoch <vsoch@users.noreply.github.com>
Co-authored-by: vsoch <vsoch@users.noreply.github.com>
* ESMF and NEMSIO changes.
- Updating ESMF to set the COMM correctly when using Intel oneapi.
- Explicitly setting the CMake MPI Fortran compiler for NEMSIO.
* Update UFS utils CMake to use MPI_<lang>_COMPILER.
#22845 revealed a long-standing bug that had never been triggered before, because the
hashing algorithm had been stable for multiple years while the bug was in production. The
bug was that when reading a concretized environment, Spack did not properly read in the
build hashes associated with the specs in the environment. Those hashes were recomputed
(and as long as we didn't change the algorithm, were recomputed identically). Spack's
policy, though, is never to recompute a hash. Once something is installed, we respect its
metadata hash forever -- even if internally Spack changes the hashing method. Put
differently, once something is concretized, it has a concrete hash, and that's it -- forever.
When we changed the hashing algorithm for performance in #22845 we exposed the bug.
This PR fixes the bug at its source, but properly reading in the cached build hash attributes
associated with the specs. I've also renamed some variables in the Environment class
methods to make a mistake of this sort more difficult to make in the future.
* ensure environment build hashes are never recomputed
* add comment clarifying reattachment of env build hashes
* bump lockfile version and include specfile version in env meta
* Fix unit-test for v1 to v2 conversion
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
* Refactor platform etc. to avoid circular dependencies
All the base classes in spack.architecture have been
moved to the corresponding specialized subpackages,
e.g. Platform is now defined within spack.platforms.
This resolves a circular dependency where spack.architecture
was both:
- Defining the base classes for spack.platforms, etc.
- Collecting derived classes from spack.platforms, etc.
Now it dopes only the latter.
* Move a few platform related functions to "spack.platforms"
* Removed spack.architecture.sys_type()
* Fixup for docs
* Rename Python modules according to review
* dvsdk: Turn off variants by default
This allows an install to more easily be explicit about which pieces to
turn on as more variants are added
* dvsdk: effectively disable the broken variants
* Switch http to https where latter exists
* Hopefully restore original permissions
* Add URL updates after include the -L curl option
* Manual corrections to select URL format strings
* Tell gtk-doc where the XML catalog is
The gtk-doc configure script has an option for specifying the path to
the XML catalog. If this is not set the configure script will search
a defined set of directories for a catalog file and will set
`with_xml_catalog` based on that. Only if no system catalog is found will
the XML_CATALOG_FILES be looked at. In order to make sure that the spack
provided catalog is used, pass the `--with-xml-catalog` option.
* Use the property from docbook-xml
Currently as part of installing a package, we lock a prefix, check if
it exists, and create it if not; the logic for creating the prefix
included a check for the existence of that prefix (and raised an
exception if it did), which was redundant.
This also includes removal of tests which were not verifying
anything (they pass with or without the modifications in this PR).
- Parallel install was failing to generate a config file.
- OpenSSH has an extensive test suite, run it if requested.
- 'executables' wrongly had 'rsh', replaced the openssh tools.
There are two ways to build SQLite: With the Autotools setup or the
so-called "amalgamation" which is a single large C file containing the
SQLite implementation. The amalgamation build is controlled by
pre-processor flags and the Spack setup was using an amalgamation
pre-processor flag for a feature that is controlled by an option of the
configure script. As a consequence, until now Spack has always built
SQLite with the rtree feature enabled.
Knowing that spack has patched the code and organized the build is potentially valuable information for GROMACS users and developers troubleshooting their builds.
PLUMED does further patches to GROMACS, so that is expressed directly also.
Modifications:
- Export platforms from spack.platforms directly, so that client modules don't have to import submodules
- Use only plain imports in test/architecture.py
- Parametrized test in test/architecture.py and put most of the setup/teardown in fixtures
This is a major rework of Spack's core core `spec.yaml` metadata format. It moves from `spec.yaml` to `spec.json` for speed, and it changes the format in several ways. Specifically:
1. The spec format now has a `_meta` section with a version (now set to version `2`). This will simplify major changes like this one in the future.
2. The node list in spec dictionaries is no longer keyed by name. Instead, it is a list of records with no required key. The name, hash, etc. are fields in the dictionary records like any other.
3. Dependencies can be keyed by any hash (`hash`, `full_hash`, `build_hash`).
4. `build_spec` provenance from #20262 is included in the spec format. This means that, for spliced specs, we preserve the *full* provenance of how to build, and we can reproduce a spliced spec from the original builds that produced it.
**NOTE**: Because we have switched the spec format, this PR changes Spack's hashing algorithm. This means that after this commit, Spack will think a lot of things need rebuilds.
There are two major benefits this PR provides:
* The switch to JSON format speeds up Spack significantly, as Python's builtin JSON implementation is orders of magnitude faster than YAML.
* The new Spec format will soon allow us to represent DAGs with potentially multiple versions of the same dependency -- e.g., for build dependencies or for compilers-as-dependencies. This PR lays the necessary groundwork for those features.
The old `spec.yaml` format continues to be supported, but is now considered a legacy format, and Spack will opportunistically convert these to the new `spec.json` format.
* Added spackage to build Sina (https://github.com/LLNL/Sina).
* Improvements to sina/package.py
Made numerous simplifications and improvements to sina/package.py
based on PR feedback.
* Added licence info
* Added maintainers
* Changed maintainers to be Github IDs.
Added a dependency for mpip@3.5: when the libunwind is set to true (which is the default)
and '~setjmp' is set to False (which is also the default) to avoid a configure
time error from not finding libunwind.
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
This modification accounts for:
1. Bootstrapping from sources using system, non-standard Python
2. Using later an ABI compatible standard Python interpreter
* tests: make `spack url [stats|summary]` work on mock packages
Mock packages have historically had mock hashes, but this means they're also invalid
as far as Spack's hash detection is concerned.
- [x] convert all hashes in mock package to md5 or sha256
- [x] ensure that all mock packages have a URL
- [x] ignore some special cases with multiple VCS fetchers
* url stats: add `--show-issues` option
`spack url stats` tells us how many URLs are using what protocol, type of checksum,
etc., but it previously did not tell us which packages and URLs had the issues. This
adds a `--show-issues` option to show URLs with insecure (`http`) URLs or `md5` hashes
(which are now deprecated by NIST).
This allows to fix the compilation of gcc versions less than 11.1.0,
due to the remove of cyclades of libsanitizer as it is described in
the patch:
The Linux kernel has removed the interface to cyclades from the latest
kernel headers due to them being orphaned for the past 13
years. libsanitizer uses this header when compiling against glibc, but
glibcs itself doesn't seem to have any references to cyclades. Further
more it seems that the driver is broken in the kernel and the firmware
doesn't seem to be available anymore. As such since this is breaking
the build of libsanitizer (and so the GCC bootstrap) it is proposed to
remove this.
Co-authored-by: Arcesio Castaneda Medina <arcesio.castaneda.medina@itwm.fraunhofer.de>
By changing return values from C #defines to enums, gdbm-1.20 breaks a kludge:
#ifndef GDBM_ITEM_NOT_FOUND
# define GDBM_ITEM_NOT_FOUND GDBM_NO_ERROR
#endif
The absence of the #define causes perl to #define GDBM_ITEM_NOT_FOUND
as GDBM_NO_ERROR which incorrect for gdbm@1.20:
* Optionally enable ccmake in cmake
Renames ncurses variant to `ccmake` since that's how users know it, and
explicitly enable/disable `BUILD_CursesDialog`.
* Make cmake locate its dependencies with CMAKE_PREFIX_PATH, and set rpath flags too
* Undo variant name & defaults change
Fixes removal of SPACK_ENV_PATH from PATH in the presence of trailing
slashes in the elements of PATH:
The compiler wrapper has to ensure that it is not called nested like
it would happen when gcc's collect2 uses PATH to call the linker ld,
or else the compilation fails.
To prevent nested calls, the compiler wrapper removes the elements
of SPACK_ENV_PATH from PATH.
Sadly, the autotest framework appends a slash to each element
of PATH when adding AUTOTEST_PATH to the PATH for the tests,
and some tests like those of GNU bison run cc inside the test.
Thus, ensure that PATH cleanup works even with trailing slashes.
This fixes the autotest suite of bison, compiling hundreds of
bison-generated test cases in a autotest-generated testsuite.
Co-authored-by: Harmen Stoppels <harmenstoppels@gmail.com>
netlib-lapack: Version 3.9.0 and above no longer builds with the IBM XL
compiler (#25447). Ported some fixes from the old ibm-xl.patch and added
logic for detection of XL's -qrecur flag.
Apply stable-release fixes from 2017 to older autoconf releses:
- Fix the scripts autoheader and autoscan to pass the test suite
- Fix test case to passing when libtool 2.4.3+ is in use
autoconf-2.13 dates back to 1999. The build wasn't possible since
4 years: Since 2017, we patch autom4te which didn't exist in 2.13,
failing the build of it. 4 years of not being able to build 2.13
is a crystal clear indication that we can remove it safely.
* amrex: support sundials variant in newer amrex versions
* propagate cuda_arch to sundials
* change to old string formatting
* require sundials+rocm when amrex+rocm
Ensure that testsuite has py-anytree and py-parameterized
and finds gtk-doc's gitdocize.
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
This PR will add a new audit, specifically for spack package homepage urls (and eventually
other kinds I suspect) to see if there is an http address that can be changed to https.
Usage is as follows:
```bash
$ spack audit packages-https <package>
```
And in list view:
```bash
$ spack audit list
generic:
Generic checks relying on global variables
configs:
Sanity checks on compilers.yaml
Sanity checks on packages.yaml
packages:
Sanity checks on specs used in directives
packages-https:
Sanity checks on https checks of package urls, etc.
```
I think it would be unwise to include with packages, because when run for all, since we do requests it takes a long time. I also like the idea of more well scoped checks - likely there will be other addresses for http/https within a package that we eventually check. For now, there are two error cases - one is when an https url is tried but there is some SSL error (or other error that means we cannot update to https):
```bash
$ spack audit packages-https zoltan
PKG-HTTPS-DIRECTIVES: 1 issue found
1. Error with attempting https for "zoltan":
<urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: Hostname mismatch, certificate is not valid for 'www.cs.sandia.gov'. (_ssl.c:1125)>
```
This is either not fixable, or could be fixed with a change to the url or (better) contacting the site owners to ask about some certificate or similar.
The second case is when there is an http that needs to be https, which is a huge issue now, but hopefully not after this spack PR.
```bash
$ spack audit packages-https xman
Package "xman" uses http but has a valid https endpoint.
```
And then when a package is fixed:
```bash
$ spack audit packages-https zlib
PKG-HTTPS-DIRECTIVES: 0 issues found.
```
And that's mostly it. :)
Signed-off-by: vsoch <vsoch@users.noreply.github.com>
Co-authored-by: vsoch <vsoch@users.noreply.github.com>
* py-jupyterhub: add version: 1.4.1
* dont need mako for latest release
* sort dependencies
* notebook isnt used for 1.4.1+
* add dependency on py-jupyter-telemetry; create new package py-jupyter-telemetry
* py-jupyter-telemetry: declare missing dependencies
* py-jupyterhub: need more specific depends_on before less specific
* add py-json-logger; py-jupyter-telemetry: add depends_on for py-json-logger
* Update var/spack/repos/builtin/packages/py-jupyter-telemetry/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* remove py-json-logger erroneously and duplicatively added
* Update var/spack/repos/builtin/packages/py-jupyterhub/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* need py-alembic@1.4: for newest py-jupyterhub
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Add a __reduce__ method to Spec
fixes#23892
The recursion limit seems to be due to the default
way in which a Spec is serialized, following all
the attributes. It's still not clear to me why this
is related to being in an environment, but in any
case we already have methods to serialize Specs to
disk in JSON and YAML format. Here we use them to
pickle a Spec instance too.
* Downgrade to build-hash
Hopefully nothing will change the package in
between serializing the spec and sending it
to the child process.
* Add support for Python 2
* Make sure PackageInstaller does not remove the just-restored
install dir after failure in spack install --overwrite
* Remove cryptic error message and rethrow actual error
By default, figlet looks for fonts in `/usr/local/share/figlet`, and if
it doesn't exist you get `figlet: standard: Unable to open font file`.
This fix changes the default font dir to the one installed in the
install prefix.
The gcc compiler can be configured to use `ld.gold` by default. It will
then call `ld.gold` explicitly when linking. When so, spack need to have
a ld.gold wrapper in PATH to inject rpaths link flags etc...
Also I wouldn't be surprised to see some package calling `ld.gold`
directly.
As for ld.gold, the argument could be made that we want to support any
package that could call ld.lld.
* Add a __reduce__ method to SpecBuildInterface
This class was confusing pickle when being serialized,
due to its scary nature of being an object that disguise
as another type.
* Add more MacOS tests, switch them to clingo
* Fix condition syntax
* Remove Python v3.6 and v3.9 with macOS
some of these are not resolvable in that there is only an http page
available, or a page reported as broken is actually ok, or a page has
an SSL error that does not prevent one from visiting (and no good replacement)
Signed-off-by: vsoch <vsoch@users.noreply.github.com>
Co-authored-by: vsoch <vsoch@users.noreply.github.com>
* Add intel-tbb-oneapi package that does the cmake configure and build.
Compare too the intel-oneapi-tbb package which only downloads a script that contains prebuilt binaries.
* Rename package intel-tbb-cmake
* Incorporate intel-tbb-cmake into intel-tbb package
* Conditionally remove 'context' from kwargs in _urlopen
Previously, 'context' is purged from kwargs in _urlopen to
conform to varying support for 'context' in different versions
of urllib. This fix tries to use 'context', and then removes
it if an exception is thrown and tries again.
* Specify error type in try statement in _urlopen
Specify TypeError when checking if 'context' is in kwargs
for _urlopen. Also, if try fails, check that 'context' is
in the error message before removing from kwargs.
This is a direct followup to #13557 which caches additional attributes that were added in #24095 that are expensive to compute. I had to reopen#25556 in another PR to invalidate the GitLab CI cache, but see #25556 for prior discussion.
### Before
```console
$ time spack env activate .
real 2m13.037s
user 1m25.584s
sys 0m43.654s
$ time spack env view regenerate
==> Updating view at /Users/Adam/.spack/.spack-env/view
real 16m3.541s
user 10m28.892s
sys 4m57.816s
$ time spack env deactivate
real 2m30.974s
user 1m38.090s
sys 0m49.781s
```
### After
```console
$ time spack env activate .
real 0m8.937s
user 0m7.323s
sys 0m1.074s
$ time spack env view regenerate
==> Updating view at /Users/Adam/.spack/.spack-env/view
real 2m22.024s
user 1m44.739s
sys 0m30.717s
$ time spack env deactivate
real 0m10.398s
user 0m8.414s
sys 0m1.630s
```
Fixes#25555Fixes#25541
* Speedup environment activation, part 2
* Only query distutils a single time
* Fix KeyError bug
* Make vermin happy
* Manual memoize
* Add comment on cross-compiling
* Use platform-specific include directory
* Fix multiple bugs
* Fix python_inc discrepancy
* Fix import tests
Most of these are perl packages that need to point to the meta docs site,
and then a fair amount of http addresses that need to be https, and then
the rest are usually documentation sites that no longer exist or were
otherwise changes
Signed-off-by: vsoch <vsoch@users.noreply.github.com>
Co-authored-by: vsoch <vsoch@users.noreply.github.com>
* Set pubkey trust to ultimate during `gpg trust`
Tries to solve the same problem as #24760 without surpressing stderr
from gpg commands.
This PR makes every imported key trusted in the gpg database.
Note: I've outlined
[here](https://github.com/spack/spack/pull/24760#issuecomment-883183175)
that gpg's trust model makes sense, since how can we trust a random
public key we download from a binary cache?
* Fix test
Fixes#25603
This commit adds a new context manager to temporarily
deactivate active environments. This context manager
is used when setting up bootstrapping configuration to
make sure that the current environment is not affected
by operations on the bootstrap store.
* Preserve exit code 1 if nothing is found
* Use context manager for the environment
- remove unneeded dependency on blas
- create external-lapack variant
- patch makefile to not build lapack if `+external-lapack`
Also:
- fix homepage link
- set parallel = False
- make references to `spec` consistent
- remove unneeded `build` method
This commit adds a regression test for version selection
with preferences in `packages.yaml`. Before PR 25585 we
used negative weights in a minimization to select the
optimal version. This may lead to situations where a
dependency may make the version score of dependents
"better" if it is preferred in packages.yaml.
PackageInstaller and Package.installed disagree over what it means
for a package to be installed: PackageInstaller believes it should be
enough for a database entry to exist, whereas Package.installed
requires a database entry & a prefix directory.
This leads to the following niche issue:
* a develop spec in an environment is successfully installed
* then somehow its install prefix is removed (e.g. through a bug fixed
in #25583)
* you modify the sources and reinstall the environment
1. spack checks pkg.installed and realizes the develop spec is NOT
installed, therefore it doesn't need to have 'overwrite: true'
2. the installer gets the build task and checks the database and
realizes the spec IS installed, hence it doesn't have to install it.
3. the develop spec is not rebuilt.
The solution is to make PackageInstaller and pkg.installed agree over
what it means to be installed, and this PR does that by dropping the
prefix directory check from pkg.installed, so that it only checks the
database.
As a result, spack will create a build task with overwrite: true for
the develop spec, and the installer in fact handles overwrite requests
fine even if the install prefix doesn't exist (it just does a normal
install).
By default the number of parellel compiler processes launched by
py-grpcio equals the number of threads. This commit limit it to
spack config build_jobs.
* Provide new version of eospac.
+ Provide version 6.5.0beta.
+ Make version 6.4.2 the default
+ Also increment
* volunteer to be the maintainer (for now).
see #25563
When we have a concrete environment and we ask to install a
concrete spec from a file, currently Spack returns a list of
specs that are all the one that match the argument DAG hash.
Instead we want to compare build hashes, which also account
for build-only dependencies.
* Added py-meshio package
* Added setuptools dependency to py-meshio package
* Update var/spack/repos/builtin/packages/py-meshio/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-meshio/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-meshio/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-meshio/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-meshio/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* added missing py-importlib-metadata dependency in py-meshio
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
#25303 filtered padding from build output, but it's still there in binary install/relocate output,
so our CI logs are still quite long and frequently hit the limit.
- [x] add context handler from #25303 to buildcache installation as well
This allows you to run `spack graph --installed` from within an environment and get a dot graph of
its concrete specs.
- [x] make `spack graph -i` environment-aware
- [x] add code to the generated dot graph to ensure roots have min rank (i.e., they're all at the
top or left of the DAG)
As of cray-mpich version 8.1.7, conventional MPI compiler wrappers are included in cray-mpich.
Co-authored-by: Luke Roskop <lroskop@cedar.head.cm.us.cray.com>
Bootstrapping clingo on macOS on `develop` gives errors like this:
```
==> Error: RuntimeError: Unable to locate python command in /System/Library/Frameworks/Python.framework/Versions/2.7/Resources/Python.app/Contents/bin
/Users/gamblin2/Workspace/spack/var/spack/repos/builtin/packages/python/package.py:662, in command:
659 return Executable(path)
660 else:
661 msg = 'Unable to locate {0} command in {1}'
>> 662 raise RuntimeError(msg.format(self.name, self.prefix.bin))
```
On macOS, `python` is laid out differently. In particular, `sys.executable` is here:
```console
Python 2.7.16 (default, May 8 2021, 11:48:02)
[GCC Apple LLVM 12.0.5 (clang-1205.0.19.59.6) [+internal-os, ptrauth-isa=deploy on darwin
Type "help", "copyright", "credits" or "license" for more information.
>>> import sys
>>> sys.executable
'/System/Library/Frameworks/Python.framework/Versions/2.7/Resources/Python.app/Contents/MacOS/Python'
```
Based on that, you'd think that
`/System/Library/Frameworks/Python.framework/Versions/2.7/Resources/Python.app/Contents` would be
where you'd look for a `bin` directory, but you (and Spack) would be wrong:
```console
$ ls /System/Library/Frameworks/Python.framework/Versions/2.7/Resources/Python.app/Contents/
Info.plist MacOS/ PkgInfo Resources/ _CodeSignature/ version.plist
```
You need to look in `sys.exec_prefix`
```
>>> sys.exec_prefix
'/System/Library/Frameworks/Python.framework/Versions/2.7'
```
Which looks much more like a standard prefix, with understandable `bin`, `lib`, and `include`
directories:
```console
$ ls /System/Library/Frameworks/Python.framework/Versions/2.7
Extras/ Mac/ Resources/ bin/ lib/
Headers@ Python* _CodeSignature/ include/
$ ls -l /System/Library/Frameworks/Python.framework/Versions/2.7/bin/python
lrwxr-xr-x 1 root wheel 7B Jan 1 2020 /System/Library/Frameworks/Python.framework/Versions/2.7/bin/python@ -> python2
```
- [x] change `bootstrap.py` to use the `sys.exec_prefix` as the external prefix, instead of just
getting the parent directory of the executable.
This adds lockfile tracking to Spack's lock mechanism, so that we ensure that there
is only one open file descriptor per inode.
The `fcntl` locks that Spack uses are associated with an inode and a process.
This is convenient, because if a process exits, it releases its locks.
Unfortunately, this also means that if you close a file, *all* locks associated
with that file's inode are released, regardless of whether the process has any
other open file descriptors on it.
Because of this, we need to track open lock files so that we only close them when
a process no longer needs them. We do this by tracking each lockfile by its
inode and process id. This has several nice properties:
1. Tracking by pid ensures that, if we fork, we don't inadvertently track the parent
process's lockfiles. `fcntl` locks are not inherited across forks, so we'll
just track new lockfiles in the child.
2. Tracking by inode ensures that referencs are counted per inode, and that we don't
inadvertently close a file whose inode still has open locks.
3. Tracking by both pid and inode ensures that we only open lockfiles the minimum
number of times necessary for the locks we have.
Note: as mentioned elsewhere, these locks aren't thread safe -- they're designed to
work in Python and assume the GIL.
Tasks:
- [x] Introduce an `OpenFileTracker` class to track open file descriptors by inode.
- [x] Reference-count open file descriptors and only close them if they're no longer
needed (this avoids inadvertently releasing locks that should not be released).
This commit rework version facts so that:
1. All the information on versions is collected
before emitting the facts
2. The same kind of atom is emitted for versions
stemming from different origins (package.py
vs. packages.yaml)
In the end all the possible versions for a given
package are totally ordered and they are given
different and increasing weights staring from zero.
This refactor allow us to avoid using negative
weights, which in some configurations may make
parent node score "better" and lead to unexpected
"optimal" results.
Add HPDDM, MMG, ParMMG and Tetgen to PETSc.
Add mmg version 5.5.2 (compatible with PETSc).
Add parmmg, depending on mmg.
Add pic variant to tetgen for PETSc.
* Adding a heap of NOAA packages for UFS.
Adding the Unified Forecast System (UFS) and all of the packages
it depends on.
* Fixing style tests.
* Removing the package CMAKE_BUILD_TYPE override.
* Removing compiler specs from `cmake_args()`.
- provides the site packages fix
- excludes the hdf5 linking changes (which are fixed in conduit@develop's build system)
- relaxes constraints to allows building static ascent against shared python
Once PR binary graduation is deployed, the shared PR mirror will
contain binaries just built by a merged PR, before the subsequent
develop pipeline has had time to finish. Using the shared PR mirror
as a source of binaries will reduce the number of times we have to
rebuild the same full hash.
* Refactor active environment getters
- Make `spack.environment.active_environment` a trivial getter for the active
environment, replacing `spack.environment.get_env` when the arguments are
not needed
- New method `spack.cmd.require_active_environment(cmd_name)` for
commands that require an environment (rather than abusing
get_env/active_environment)
- Clean up calling code to call spack.environment.active_environment or
spack.cmd.require_active_environment as appropriate
- Remove the `-e` parsing from `active_environment`, because `main.py` is
responsible for processing `-e` and already activates the environment.
- Move `spack.environment.find_environment` to
`spack.cmd.find_environment`, to avoid having spack.environment aware
of argparse.
- Refactor `spack install` command so argument parsing is all handled in the
command, no argparse in spack.environment or spack.installer
- Update documentation
* Python 2: toplevel import errors only with 'as ev'
In two files, `import spack.environment as ev` leads to errors
These errors are not well understood ("'module' object has no attribute
'environment'"). All other files standardize on the above syntax.
* Bootstrap clingo from binaries
* Move information on clingo binaries to a JSON file
* Add support to bootstrap on Cray
Bootstrapping on Cray requires, at the moment, to
swap the platform when looking for binaries - due
to #22800.
* Add SHA256 verification for bootstrapped software
Use sha256 verification for binaries necessary to bootstrap
the concretizer and gpg for signature verification
* patchelf: use Spec._old_concretize() to bootstrap
As noted in #24450 we may happen to need the
concretizer when bootstrapping clingo. In that case
only the old concretizer is available.
* Add a schema for bootstrapping methods
Two fields have been added to bootstrap.yaml:
"sources" which lists the methods available for
bootstrapping software
"trusted" which records if a source is trusted or not
A subcommand has been added to "spack bootstrap" to list
the sources currently available.
* Methods used for bootstrapping are configurable from bootstrap:sources
The function that tries to ensure a given Python module
is importable now tries bootstrapping methods in the same
order as they are defined in `bootstrap.yaml`
* Permit to trust/untrust bootstrapping methods
* Add binary tests for MacOS, Ubuntu
* Add documentation
* Add a note on bash
Spack is internally using a patched version of `argparse` mainly to backport Python 3 functionality
into Python 2. This PR makes it such that for the supported Python 3 versions we use `argparse`
from the standard Python library. This PR has been extracted from #25371 where it was needed
to be able to use recent versions of `pytest`.
* Fixed formatting issues when using a pristine argparse.py
* Fix error message for Python 3.X when missing positional arguments
* Account for the change of API in Python 3.7
* Layout multi-valued args into columns in error messages
* Seamless transition in develop if argparse.pyc is in external
* Be more defensive in case we can't remove the file.
Add link type to spack.yaml format
Add tests to verify link behavior is correct for installed files
for all three view types
Co-authored-by: vsoch <vsoch@users.noreply.github.com>
* ampl: Add missing ampl_lic install and improve look of resources
* ampl: Add myself as maintainer
* ampl: Remove unused variable and delete extra lines
Co-authored-by: Rob Groner <rug262@psu.edu>
* rct: new packages (core packages and some dependencies)
* rct: new packages (core packages and some dependencies)
* radical-entk: updated dependencies (according to comments)
* radical-gtod: updated version name
* radical-pilot: updated dependencies (according to comments)
* radical-saga: updated dependencies (according to comments)
* radical-utils: updated dependencies and set old versions deprecated
* saga-python: removed due to absence of packages (in PyPI, GitHub), this project was replaced by `radical-saga` and corresponding package `py-radical-saga` should be used
* saga-python: rolled back, but with deprecation status
* ntplib: removed maintainer
* pika: removed maintainer
The commands have been deprecated in #7098, and have
been failing with an error message since then.
Cleaning the code since it is unlikely that somebody
is still using them.
* Fix for building shared lib when enabling ROCm, for STRUMPACK 5.1.1.
* Update patch for shared lib with STRUMPACK 5.1.1 and ROCm, also update FindHIP.cmake
* update patch for shared libs with ROCm
Preferred providers had a non-zero weight because in an earlier formulation of the logic program that was needed to prefer external providers over default providers. With the current formulation for externals this is not needed anymore, so we can give a weight of zero to both default choices and providers that are externals. _Using zero ensures that we don't introduce any drift towards having less providers, which was happening when minimizing positive weights_.
Modifications:
- [x] Default weight for providers starts at 0 (instead of 10, needed before to prefer externals)
- [x] Rules to compute the `provider_weight` have been refactored. There are multiple possible weights for a given `Virtual`. Only one gets selected by the solver (the one that minimizes the objective function).
- [x] `provider_weight` are now accounting for each different `Virtual`. Before there was a single weight per provider, even if the package was providing multiple virtuals.
* Give preferred providers a weight of zero
Preferred providers had a non-zero weight because in an earlier
formulation of the logic program that was needed to prefer
external providers over default providers.
With the current formulation for externals this is not needed anymore,
so we can give a weight of zero to default choices. Using zero
ensures that we don't introduce any drift towards having
less providers, which was happening when minimizing positive weights.
* Simplify how we compute weights for providers
Rewrite rules so that specific events (i.e. being
an external) unlock the possibility to use certain
weights. The weight being considered is then selected
by the minimization process to be the one that gives
the best score.
* Allow providers to have different weights for different virtuals
Before this change we didn't differentiate providers based on
the virtual they provide, which meant that packages providing
more than one virtual had nonetheless a single weight.
With this change there will be a weight per virtual.
* elk package updated to handle 3 latest versions support for older
versions is dropped
* fixed typos
* openmp dependency handling added
* and for blis too
* Retain support for elk 3, deprecate
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* cp2k: fix build with GCC-10+ and MPICH
* cp2k: update SIRIUS and ELPA dependencies
* elpa: add version 2021.05.001, add ROCm support, include SVE flags
This is both a bugfix and a generalization of #25168. In #25168, we attempted to filter padding
*just* from the debug output of `spack.util.executable.Executable` objects. It turns out we got it
wrong -- filtering the command line string instead of the arg list resulted in output like this:
```
==> [2021-08-05-21:34:19.918576] ["'", '/', 'b', 'i', 'n', '/', 't', 'a', 'r', "'", ' ', "'", '-', 'o', 'x', 'f', "'", ' ', "'", '/', 't', 'm', 'p', '/', 'r', 'o', 'o', 't', '/', 's', 'p', 'a', 'c', 'k', '-', 's', 't', 'a', 'g', 'e', '/', 's', 'p', 'a', 'c', 'k', '-', 's', 't', 'a', 'g', 'e', '-', 'p', 'a', 't', 'c', 'h', 'e', 'l', 'f', '-', '0', '.', '1', '3', '-', 'w', 'p', 'h', 'p', 't', 'l', 'h', 'w', 'u', 's', 'e', 'i', 'a', '4', 'k', 'p', 'g', 'y', 'd', 'q', 'l', 'l', 'i', '2', '4', 'q', 'b', '5', '5', 'q', 'u', '4', '/', 'p', 'a', 't', 'c', 'h', 'e', 'l', 'f', '-', '0', '.', '1', '3', '.', 't', 'a', 'r', '.', 'b', 'z', '2', "'"]
```
Additionally, plenty of builds output padded paths in other plcaes -- e.g., not just command
arguments, but in other `tty` messages via `llnl.util.filesystem` and other places. `Executable`
isn't really the right place for this.
This PR reverts the changes to `Executable` and moves the filtering into `llnl.util.tty`. There is
now a context manager there that you can use to install a filter for all output.
`spack.installer.build_process()` now uses this context manager to make `tty` do path filtering
when padding is enabled.
- [x] revert filtering in `Executable`
- [x] add ability for `tty` to filter output
- [x] install output filter in `build_process()`
- [x] tests
These versions can cause weird concretizations, and it looks like the
old version of xsdk may not even work because of xsdktrilinos being
disabled. The hypre version tagged for xsdk@0.2 no longer exists at the
described location.
With the previous naming scheme, `trilinos@:10` concretizes to
`trilinos@xsdk-0.2.0`. Now, it's clear what the xsdk version is closest
to. Changed from tag to the corresponding commit SHA for safety.
* Do not allow cray build system patch for later version of otf2
* Modify flag_handler logic in the trilinos package
Modify flag_handler logic in the trilinos package to work better with compilers
other than CCE
Run CTest at build time with:
```
spack install --test=root openpmd-api@<version>
```
and run smoke-tests after install and loading of the package via
```
spack load -r /<spec>
spack test run /<spec>
```
This pull request adds a new workflow to build and deploy Spack Docker containers
from GitHub Actions. In comparison with our current system where we use Dockerhub's
CI to build our Docker containers, this workflow will allow us to now build for multiple
architectures and deploy to multiple registries. (At the moment x86_64 and Arm64 because
ppc64le is throwing an error within archspec.)
As currently set up, the PR will build all of the current containers (minus Centos6 because
those yum repositories are no longer available?) as both x86_64 and Arm64 variants. The
workflow is currently setup to build and deploy containers nightly from develop as well as
on tagged releases. The workflow will also build, but NOT deploy containers on a pull request
for the purposes of testing this PR. At the moment it is setup to deploy the built containers to
GitHub's Container Registry although, support for also uploading to Dockerhub/Quay can be
included easily if we decide to keep releasing on Dockerhub/want to begin releasing on Quay.
This is an attempt to fix "Missing base commit" messages in the codecov UI. Because we do not run
full tests on package PRs, package PRs' merge commits on `develop` don't have coverage info. It
appears that codecov will give you an error if the pseudo-base's coverage data doesn't all apply
properly to the real PR base, unless the `allow_coverage_offsets` option is set.
* See here for docs:
https://docs.codecov.com/docs/comparing-commits#pseudo-comparison
* See here for another potential solution:
https://community.codecov.com/t/2480/15
`compare_specs()` had a `colorful` keyword argument, but everything else in
spack uses `color` for this.
- [x] rename the argument
- [x] make the default follow spack's `--color=always/never/auto` setting
* Bump py-boto3, add python constraints, bump deps
* Update var/spack/repos/builtin/packages/py-boto3/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-boto3/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-boto3/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Add py-os-service-types
* Update var/spack/repos/builtin/packages/py-os-service-types/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Add py-oslo-i18n
* Update var/spack/repos/builtin/packages/py-oslo-i18n/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Bump py-botocore and add python constraints
* Update var/spack/repos/builtin/packages/py-botocore/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Add a workflow to test bootstrapping clingo on
different platforms so that we can detect changes
that break it.
Compute `site_packages_dir` in `bootstrap.py` as it was
before #24095, until we figure a better way to override
that attribute.
These are the versions tested (and successfully patched) against
intel-tbb.nvhpc-remove-flags.2017.patch: @2017, @2017.8, @2018, @2018.6
intel-tbb.nvhpc-remove-flags.2019.patch: @2019
intel-tbb.nvhpc-remove-flags.2019.1.patch: @2019.[1-6]
intel-tbb.nvhpc-remove-flags.2019.7.patch: @2019.[7-8]
intel-tbb.nvhpc-remove-flags.2019.9.patch: @2019.9, 2020.[0-3]
The intel-tbb.nvhpc-version-script-fix.2017.patch was tested and
applied successfully against all of the versions above.
Long, padded install paths can get to be very long in the verbose install
output. This has to be filtered out by the Executable class, as it
generates these debug messages.
- [x] add ability to filter paths from Executable output.
- [x] add a context manager that can enable path filtering
- [x] make `build_process` in `installer.py`
This should hopefully allow us to see most of the build output in
Gitlab pipeline builds again.
`build_process` has been around a long time but it's become a very large,
unwieldy method. It's hard to work with because it has a lot of local
variables that need to persist across all of the code.
- [x] To address this, convert it its own `BuildInfoProcess` class.
- [x] Start breaking the method apart by factoring out the main
installation logic into its own function.
When context managers are used to save and restore values, we need to remember
to use try/finally around the yield in case an exception is thrown. Otherwise,
the cleanup will be skipped.
* rnpletal: New package
RNPL is an old package that is still used today by my collaborators, but doesn't see any development any more. I'm creating a Spack package merely to make it easier to install it on various systems. The code is not modern (C without prototypes – yes, that used to be a thing), and a large diff modernizes the code to make it palatable to modern C and Fortran compilers.
RNPL contains several sub-package. The current Spack package builds only the main one.
* rnpletal: Remove unused import
* Convert into AutotoolsPackage
* Don't check for "shared" variant
* rnpletal: Change "version" to `develop`
* rnpletal: Use existing `configure` function
* adjust for erroneous detection of nvc as gcc
adjust for erroneous detection of nvc as gcc when it is built with gcc
* add missing parenthesis :/
* fix trailing whitespace
* re-work hdf5 patch for nvc to make it more general
* flake8 fixes
* Render as comment
Render intended note as a comment rather than logical constraint
Co-authored-by: Frank Willmore <willmore@anl.gov>
- Change config from the undocumented `use_curl: true/false` to `url_fetch_method: urllib/curl`.
- Documentation of `url_fetch_method` in `defaults/config.yaml`
- Default fetch option explicitly set to `urllib` for users who may not have curl on their system
To upgrade from `use_curl` to `url_fetch_method`, run `spack config update config`
* kadath: New package
* Update var/spack/repos/builtin/packages/kadath/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/kadath/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/kadath/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/kadath/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* kadath: Add description to MPI variant
* kadath: Add empty line
* kadath: Add variant "codes=none" to avoid empty default
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* add variant with compiler optimization
Update package.py to include variant with compiler optimization, benchmarked at A-HUG hackaton to improve major kernel time by roughly 3%.
* fix style
* Update var/spack/repos/builtin/packages/laghos/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
The output order for `spack diff` is nondeterministic for larger diffs -- if you
ran it several times it will not put the fields in the spec in the same order on
successive invocations.
This makes a few fixes to `spack diff`:
- [x] Implement the change discussed in https://github.com/spack/spack/pull/22283#discussion_r598337448
to make `AspFunction` comparable in and of itself and to eliminate the need for `to_tuple()`
- [x] Sort the lists of diff properties so that the output is always in the same order.
- [x] Make the output for different fields the same as what we use in the solver. Previously, we
would use `Type(value)` for non-string values and `value` for strings. Now we just use
the value. So the output looks a little cleaner:
```
== Old ========================== == New ====================
@@ node_target @@ @@ node_target @@
- gdbm Target(x86_64) - gdbm x86_64
+ zlib Target(skylake) + zlib skylake
@@ variant_value @@ @@ variant_value @@
- ncurses symlinks bool(False) - ncurses symlinks False
+ zlib optimize bool(True) + zlib optimize True
@@ version @@ @@ version @@
- gdbm Version(1.18.1) - gdbm 1.18.1
+ zlib Version(1.2.11) + zlib 1.2.11
@@ node_os @@ @@ node_os @@
- gdbm catalina - gdbm catalina
+ zlib catalina + zlib catalina
```
I suppose if we want to use `repr()` in the output we could do that and could be
consistent but we don't do that elsewhere -- the types of things in Specs are
all stringifiable so the string and the name of the attribute (`version`, `node_os`,
etc.) are sufficient to know what they are.
* lorene: Install only executables, not unrelated files in the same directory
* lorene: Don't determine compile dependencies
The current way doesn't work (cpp misses C++ include paths), and we don't need dependencies anyway.
* lorene: Correct BLAS library names
* lorene: Remove comment
Gitlab truncates job trace output (even the complete raw output) at 4MB,
so this change captures it to a file under "user_data" artifacts as well,
to make sure we can debug output from the end of the rebuild job.
When a spec fails to build on `develop`, instead of storing an empty file as the entry in the broken specs list, this change stores the full spec yaml as well as links to the failing pipeline and job.
A `spack diff` will take two specs, and then use the spack.solver.asp.SpackSolverSetup to generate
lists of facts about each (e.g., nodes, variants, etc.) and then take a set difference between the
two to show the user the differences.
Example output:
$ spack diff python@2.7.8 python@3.8.11
==> Warning: This interface is subject to change.
--- python@2.7.8/tsxdi6gl4lihp25qrm4d6nys3nypufbf
+++ python@3.8.11/yjtseru4nbpllbaxb46q7wfkyxbuvzxx
@@ variant_value @@
- python patches a8c52415a8b03c0e5f28b5d52ae498f7a7e602007db2b9554df28cd5685839b8
+ python patches 0d98e93189bc278fbc37a50ed7f183bd8aaf249a8e1670a465f0db6bb4f8cf87
@@ version @@
- openssl Version(1.0.2u)
+ openssl Version(1.1.1k)
- python Version(2.7.8)
+ python Version(3.8.11)
Currently this uses diff-like output but we will attempt to improve on this in the future.
One use case for `spack diff` is whenever a user has a disambiguate situation and cannot
remember how two different installs are different. The command can also output `--json` in
the case of a more analysis type use case where we want to save complete data with all
diffs and the intersection. However, the command is really more intended for a command
line use case, and we likely will have an analyzer more suited to saving data
Signed-off-by: vsoch <vsoch@users.noreply.github.com>
Co-authored-by: vsoch <vsoch@users.noreply.github.com>
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
Co-authored-by: Todd Gamblin <tgamblin@llnl.gov>
* Catch ConnectionError from CDash reporter
Catch ConnectionError when attempting to upload the results of `spack install`
to CDash. This follows in the spirit of #24299. We do not want `spack install`
to exit with a non-zero status when something goes wrong while attempting to
report results to CDash.
* Catch HTTP Error 400 (Bad Request) in relate_cdash_builds()
* sst-elements: add optional support for flashdimmsim, dramsim3 and
add new packages for each
* sst-dumpi: add version 7.1.0
* sst-core: autotools dependencies are required for all versions
* new package: dtc
* add error message redirect for +dumpi, otf, and otf2: these are not
currently supported
Modifications:
- Remove the "build tests" workflow from GitHub Actions
- Setup a similar e2e test on Gitlab
In this way we'll reduce load on GitHub Actions workflows and for e2e tests will
benefit from the buildcache reuse granted by pipelines.
ENABLE_SPLASH configuration has been removed entirely after 21.06 so
patch is no longer necessary after #24931. (Versions between 0.90.1 and
21.06 will likely still need a patch, and while it's not clear if this
patch is the right one, seems better to leave something in.)
- add version 9.1.2
- set a license file
- set the license environment variable
- remove the download and license information out of the description so
it does not show up in environment modules
- extend python and set python version constraints
- build gurobipy to be used in any compatible python, used for more
extensive computations than the gurobi shell
- remove preexisting PYTHONPATH from gurobi.sh as the shell uses a
built-in python, which will likely be different from "system" python
- add maintainer
`spack style` previously used a Travis CI variable to figure out
what the base branch of a PR was, and this was apparently also set
on `develop`. We switched to `GITHUB_BASE_REF` to support GitHub
Actions, but it looks like this is set to `""` in pushes to develop,
so `spack style` breaks there.
This PR does two things:
- [x] Remove `GITHUB_BASE_REF` knowledge from `spack style` entirely
- [x] Handle `GITHUB_BASE_REF` in style scripts instead, and explicitly
pass the base ref if it is present, but don't otherwise.
This makes `spack style` *not* dependent on the environment and fixes
handling of the base branch in the right place.
This adds a `--root` option so that `spack style` can check style for
a spack instance other than its own.
We also change the inner workings of `spack style` so that `--config FILE`
(and similar options for the various tools) options are used. This ensures
that when `spack style` runs, it always uses the config from the running spack,
and does *not* pick up configuration from the external root.
- [x] add `--root` option to `spack style`
- [x] add `--config` (or similar) option when invoking style tools
- [x] add a test that verifies we can check an external instance
* [py-lmfit] fixed py-asteval dependency requirements
* [py-lmfit] added version 1.0.2
* [py-lmfit] flake8
* [py-lmfit] 1.0.2 reqires python 3.6
* [py-lmfit] removed newer dependency requirements to be in line with setup.py not requirements.txt
* pbs: new virtual package
Some of our clusters have an older installation of
libtorque and tm.h that are *not* from OpenPBS. Using the current
openpbs dependency for openmpi causes concretization errors due to
restrictions on older python and hwloc requirements that don't apply,
even with an external non-buildable installation.
The new 'torque' bundle package allows users to point to that external
installation without problems.
Detailed description of torque by Sergey Kosukhin <skosukhin@gmail.com>
Intel oneAPI installs maintain a lock file in XDG_RUNTIME_DIR,
which by default exists in /tmp (and is shared by all component
installs). This prevented multiple oneAPI components from being
installed in parallel. This commit sets XDG_RUNTIME_DIR to exist
within Spack's installation Stage, so allows multiple components
to be installed at the same time.
* aws-parallelcluster: update maintainers list
Signed-off-by: Tim Lane <tilne@amazon.com>
* aws-parallelcluster: add v2.11.1
Signed-off-by: Tim Lane <tilne@amazon.com>
This PR fixes the tesseract package
- add missing dependencies
- build documentation
- build and install java component
- build and install training component
This uses our bootstrapping logic to automatically install dependencies for
`spack style`. Users should no longer have to pre-install all of the tools
(`isort`, `mypy`, `black`, `flake8`). The command will do it for them.
- [x] add logic to bootstrap specs with specific version requirements in `spack style`
- [x] remove style tools from CI requirements (to ensure we test bootstrapping)
- [x] rework dependencies for `mypy` and `py-typed-ast`
- `py-typed-ast` needs to be a link dependency
- it needs to be at 1.4.1 or higher to work with python 3.9
Signed-off-by: vsoch <vsoch@users.noreply.github.com>
* Adding package for omegaconf
* Update var/spack/repos/builtin/packages/py-omegaconf/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Changing py-omegaconf to use github source URL instead of pypi
* Style fix
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Worked with flecsi developers to tighten, relax, and clarify
constraints and better understand how the flecsi project uses
legion. In the process, discovered that flecsi@1.4 cannot be
built with legion without heavy changes/reverts to the legion
and gasnet spackages.
Also, most importantly, fixed branding as to how flecsi is spelled
We add compilation flags when using %nvhpc to suppress warnings
(which due to global -Werror flag in the build get promoted to
errors) for the following:
Diagnostic 111: statement is unreachable
Diagnostic 177: variable "foo" was declared but never referenced
Diagnostic 188: enumerated type mixed with another type
Diagnostic 550: variable "foo" was set but never used
#24095 introduced a couple of bugs, which are fixed here:
1. The module path is computed incorrectly for bootstrapped clingo
2. We remove too many paths for `sys.path` in case of failures
z3 is a dependency of llvm and llvm-amdgpu, and when z3 python bindings
are enabled it depends on py-setuptools as a run dependency. That's
fine, except that py-setuptools now influences the hash of
llvm/llvm-amdgpu, which can be very annoying when another package
restricts the py-setuptools version -- you'll end up recompiling llvm
for no good reason :(.
* Updated the lbann package to not enabled OpenMP in BLAS package when
working on Darwin systems.
* Add the Sphinx RTD theme as an explicit dependency when building documentation
In some cases the FindHDF5.cmake returnd a wrong value for the HDF5 library names and path. For example it returns hdf5-shared as library name without a search path or checking if this is really an existing shared library. By HDF5_NO_FIND_PACKAGE_CONFIG_FILE=True/ON to the cmake options, the FindHDF5 module does not rely on a properly install hdf5-config.cmake and thus searches for the library and its paths. This results in a usable return value and fenics works afterwards.
* Updates for dependencies in main branch
* Add more depends
* Make CMake available at runtime for fenics-dolfinx
* Add maintainer
Co-authored-by: Garth N. Wells <gnw20@cam.ac.uk>
Although `cpio` is present in many environments, it may not be always
available.
The failure to build this package can be reproduced in a fresh Docker
image `debian:10`.
* trilinos: rename basker variant
The Basker solver is part of amesos2 but is clearer without the extra
scoping.
* trilinos: automatically enable teuchos and remove variant
Basically everything in trilinos needs teuchos
* trilinos: group top-level dependencies
* trilinos: update dependencies, removing unused
- GLM, X11 are unused (x11 lacks dependency specs too)
- Python variant is more like a TPL so rearrange that
- Gtest internal package shouldn't be compiled or exported
- Add MPI4PY requirement for pytrilinos
* trilinos: remove package meta-options
- XSDK settings and "all opt packages" are not used anywhere
- all optional packages are dangerous
* trilinos: Use hwloc iff kokkos
See #19119, also the HWLOC tpl name was misspelled so this was being ignored before.
* Flake
* Fix trilinos +netcdf~mpi
* trilinos: default to disabling external dependencies
* Remove teuchos from downstream dependencies
* fixup! trilinos: Use hwloc iff kokkos
* Add netcdf requirements to packages with ^trilinos+exodus
* trilinos: disable exodus by default
* fixup! Add netcdf requirements to packages with ^trilinos+exodus
* trilinos: only enable hwloc when @13: +kokkos
* xyce: propagate trilinos dependencies more simply
* dtk: fix missing boost dependency
* trilinos: remove explicit metis dependency
* trilinos: require metis/parmetis for zoltan
Disable zoltan by default to minimize default dependencies
* trilinos: mark mesquite disabled and fix kokkos arch
* xsdk: fix trilinos to also list zoltan [with zoltan2]
* ci: remove nonexistent variant from trilinos
* trilinos: add missing boost dependency
Co-authored-by: Satish Balay <balay@mcs.anl.gov>
Third-party Python libraries may be installed in one of several directories:
1. `lib/pythonX.Y/site-packages` for Spack-installed Python
2. `lib64/pythonX.Y/site-packages` for system Python on RHEL/CentOS/Fedora
3. `lib/pythonX/dist-packages` for system Python on Debian/Ubuntu
Previously, Spack packages were hard-coded to use the (1). Now, we query the Python installation itself and ask it which to use. Ever since #21446 this is how we've been determining where to install Python libraries anyway.
Note: there are still many packages that are hard-coded to use (1). I can change them in this PR, but I don't have the bandwidth to test all of them.
* Python: handle dist-packages and site-packages
* Query Python to find site-packages directory
* Add try-except statements for when distutils isn't installed
* Catch more errors
* Fix root directory used in import tests
* Rely on site_packages_dir property
* Change url and checksums for libpng to official sourceforge archives
* Update url scheme from http to https
* switch to .xz archives
Co-authored-by: Todd Gamblin <tgamblin@llnl.gov>
* Add py-h5py version 3.3.0
The mpi4py dependency was bumped to 3.0.2 in setup.py. I'm not sure if that's actually required or not, but nothing lower is still tested.
* Use environment variable to stop h5py using setuptools setup_requires feature
* Add myself as a maintainer for py-h5py
* [py-transformers] can now use newer versions of tokenizers
* [py-transformers] Added version 4.6.1
* [py-transformers] removing old patch
* [py-transformers] boto3 no longer needed
* first build of py-torchmeta
* updated versions for torchvision and torch
* [py-torchmeta] using pil provider
Co-authored-by: Sid Pendelberry <sid@rit.edu>
The Makefile for the MAGMA smoke tests uses pkg-config to find
the MAGMA compile flags, but the test() routine in the spack
package was not configured to provide the location of the
pkg-config file. This modification sets PKG_CONFIG_PATH correctly
to allow the smoketests to successfully compile. It also removes
the *_dir variables which were unused by the magma
examples/Makefile.
Using the original concretizer, trying to concretize py-jupyterlab fails
with
```
==> Error: Invalid Version range: 6.1.0:6.1
```
because py-tornado does not have a 6.1.0 version but only a 6.1 one.
Makefiles for libtirpc have hardcoded the -pipe flag to the compiler
nvhpc compilers do not recognize that flag.
This PR provides a patch to remove the -pipe flag from the Makefile.
Patch should work with libtirpc@1.2.6 and @1.1.4
jupyterlab was looking for its application directory inside the python
prefix instead its own one. This was fixed by setting the according
environment variable.
* Permit to enable/disable bootstrapping and customize store location
This PR adds configuration handles to allow enabling
and disabling bootstrapping, and to customize the store
location.
* Move bootstrap related configuration into its own YAML file
* Add a bootstrap command to manage configuration
Spack allows users to set `padded_length` to pad out the installation path in
build farms so that any binaries created are more easily relocatable. The issue
with this is that the padding dominates installation output and makes it
difficult to see what is going on. The padding also causes logs to easily
exceed size limits for things like GitLab artifacts.
This PR fixes this by adding a filter in the logger daemon. If you use a
setting like this:
config:
install_tree:
padded_length: 512
Then lines like this in the output:
==> [2021-06-23-15:59:05.020387] './configure' '--prefix=/Users/gamblin2/padding-log-test/opt/__spack_path_placeholder__/__spack_path_placeholder__/__spack_path_placeholder__/__spack_path_placeholder__/__spack_path_placeholder__/__spack_path_placeholder__/__spack_path_placeholder__/__spack_path_placeholder__/__spack_path_placeholder__/__spack_path_placeholder__/__spack_path_placeholder__/__spack_path_placeholder__/__spack_path_placeholder__/__spack_path_placeholder__/__spack_path_placeholder__/__spack_path_placeholder__/__spack_path_placeholder__/__spack_path_pla/darwin-bigsur-skylake/apple-clang-12.0.5/zlib-1.2.11-74mwnxgn6nujehpyyalhwizwojwn5zga
will be replaced with the much more readable:
==> [2021-06-23-15:59:05.020387] './configure' '--prefix=/Users/gamblin2/padding-log-test/opt/[padded-to-512-chars]/darwin-bigsur-skylake/apple-clang-12.0.5/zlib-1.2.11-74mwnxgn6nujehpyyalhwizwojwn5zga
You can see that the padding has been replaced with `[padded-to-512-chars]` to
indicate the total number of characters in the padded prefix. Over a long log
file, this should save a lot of space and allow us to see error messages in
GitHub/GitLab log output.
The *actual* build logs still have full paths in them. Also lines that are
output by Spack and not by a package build are not filtered and will still
display the fully padded path. There aren't that many of these, so the change
should still help reduce file size and readability quite a bit.
015e29efe1 that introduced this section to the
documentation said “two” here instead of the actual count, three.
9f54cea5c5 then added a fourth, BLAS/LAPACK.
Rather than trying to keep this leading count in sync, this change just replaces
the wording with something more generic/stable.
Getting rid of another top-level file.
`coverage.py` has supported `pyproject.toml` since version 5.0, and
all versions of coverage so far work with python 2.7. We just need to
ensure that a version of coverage with the `toml` extra is installed
in the test environment.
I tested this with `coverage run`, `coverage report`, and `coverage html`.
* openPMD-api: rename develop
Rename to match known Spack version comparison schemes:
```
develop>main>master>head>trunk>9999>0>z>a
```
Currently, the hdf5 patch that is pre-0.14.0 is also applied to
`dev`, which naturally fails (already applied).
* fix dev in warpx
* py-markupsafe: add 2.0.1
* Update var/spack/repos/builtin/packages/py-markupsafe/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
This moves our `mypy` configuration from `.mypy.ini` to `.pyproject.toml`
and increases the minimum `mypy` version in the tests.
- [x] move `mypy` configuration to `pyproject.toml`
- [x] remove `.mypy.ini`
- [x] ensure that `mypy` version .900 or higher is used in tests
Ideally a test-only dependency won't be in the build, but until then
mark the requirement of gtest up to 1.10.
See e4s job failure at https://gitlab.spack.io/spack/spack/-/jobs/349959 .
Looks like 1.11 introduces some breaking incompatibilities, so perhaps
we should transition later.
* fix remaining flake8 errors
* imports: sort imports everywhere in Spack
We enabled import order checking in #23947, but fixing things manually drives
people crazy. This used `spack style --fix --all` from #24071 to automatically
sort everything in Spack so PR submitters won't have to deal with it.
This should go in after #24071, as it assumes we're using `isort`, not
`flake8-import-order` to order things. `isort` seems to be more flexible and
allows `llnl` mports to be in their own group before `spack` ones, so this
seems like a good switch.
* Fix compiler test
Use `self.spec.satisfies` on compiler to determine if a flag should be
applied or not. This approach avoids issues with the strings `gcc`
or `clang` appearing in the full path to the compiler executables, as
happens with spack-installed compilers (e.g. `nvhpc%gcc`).
* Limit compiler name search to last path component
@skosukhin pointed out that the cflag modification should happen for any
clang or gcc compiler, regardless of what compiler spec provides them.
This commit reverts to searching for a compiler name containing "gcc"
or "clang", but limits the search to the last path component, which
avoids matching spack-installed compilers built with gcc (e.g.
`nvhpc%gcc`), which will have "gcc" in the compiler path.
* Use `os.path` rather than `pathlib`
Co-authored-by: Paul Henning <phenning@lanl.gov>
`dateutil.parser` was an optional dependency for CVS tests. It was failing on macOS
beacuse the dateutil types were not being installed, and mypy was failing *even when the
CVS tests were skipped*. This seems like it was an oversight on macOS --
`types-dateutil-parser` was not installed there, though it was on Linux unit tests.
It takes 6 lines of YAML and some weird test-skipping logic to get `python-dateutil` and
`types-python-dateutil` installed in all the tests where we need them, but it only takes
4 lines of code to write the date parser we need for CVS, so I just did that instead.
Note that CVS date format can vary from system to system, but it seems like it's always
pretty similar for the parts we care about.
- [x] Replace dateutil.parser with a simpler date regex
- [x] Lose the dependency on `dateutil.parser`
Previous tests of `spack style` didn't really run the tools --
they just ensure that the commands worked enough to get coverage.
This adds several real tests and ensures that we hit the corner
cases in `spack style`. This also tests sucess as well as failure
cases.
This consolidates code across tools in `spack style` so that each
`run_<tool>` function can be called indirecty through a dictionary
of handlers, and os that checks like finding the executable for the
tool can be shared across commands.
- [x] rework `spack style` to use decorators to register tools
- [x] define tool order in one place in `spack style`
- [x] fix python 2/3 issues to Get `isort` checks working
- [x] make isort error regex more robust across versions
- [x] remove unused output option
- [x] change vestigial `TRAVIS_BRANCH` to `GITHUB_BASE_REF`
- [x] update completion
This PR configures the spack docbook packages
- docbook-xsl
- docbook-xml
The public entities are now mapped to the locally installed files of the
respective packages. The example catalogs are left in place and
XML_CATALOG_FILES points to the newly created catalogs.
Perl keeps copies of the bzip2 and zlib source code in its own source
tree and by default uses them in favor of outside libraries. Instead,
put these dependencies under control of spack and tell perl to use the
spack-built versions.
* py-keyring: fix installation on linux
* Update var/spack/repos/builtin/packages/py-keyring/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-keyring/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
We should not fail the generate stage simply due to the presence of
a broken-spec somewhere in the DAG. Only fail if the known broken
spec needs to be rebuilt.
This PR adds a context manager that permit to group the common part of a `when=` argument and add that to the context:
```python
class Gcc(AutotoolsPackage):
with when('+nvptx'):
depends_on('cuda')
conflicts('@:6', msg='NVPTX only supported in gcc 7 and above')
conflicts('languages=ada')
conflicts('languages=brig')
conflicts('languages=go')
```
The above snippet is equivalent to:
```python
class Gcc(AutotoolsPackage):
depends_on('cuda', when='+nvptx')
conflicts('@:6', when='+nvptx', msg='NVPTX only supported in gcc 7 and above')
conflicts('languages=ada', when='+nvptx')
conflicts('languages=brig', when='+nvptx')
conflicts('languages=go', when='+nvptx')
```
which needs a repetition of the `when='+nvptx'` argument. The context manager might help improving readability and permits to group together directives related to the same semantic aspect (e.g. all the directives needed to model the behavior of `gcc` when `+nvptx` is active).
Modifications:
- [x] Added a `when` context manager to be used with package directives
- [x] Add unit tests and documentation for the new feature
- [x] Modified `cp2k` and `gcc` to show the use of the context manager
I installed curl on my mac and it picked up a homebrew (I think?)
installation of gsasl. A later system update broke git because of the
implicitly added dependency. Explicitly disabling libraries that *might*
exist on the system is the safe approach here.
```
dyld: Library not loaded: /usr/local/opt/gsasl/lib/libgsasl.7.dylib
Referenced from: /rnsdhpc/code/spack/opt/spack/apple-clang/curl/gag5v3c/lib/libcurl.4.dylib
Reason: image not found
error: git-remote-https died of signal 6
```
* Added Perl workaround for CUDA <= 8
* Re-wrapped comment
* Proofreading corrections
* Added a reference
* Do not override Perl include path
* Retrieve shell once
Co-authored-by: Axel Huebl <axel.huebl@plasma.ninja>
* trilinos: add teko conflict
* trilinos: improve gotype variant
Instead of 'none' and 'long' typically being the same (but not for older
trilinos versions), add an explicit 'all' variant that only works for
older trilinos which supports multiple simultaneous tpetra
instantiations.
* trilinos: add self as maintainer
* trilinos: disable vendored gtest by default
This changes several conflicting variants to a single
multi-value variant, and uses conflicts instead of raising InstallError.
(With clingo, requesting +gui automatically selects features=huge!)
I have also rearranged the dependencies for clarity and simplified the
conifgure args.
ci: only write to broken-specs list on SpackError
Only write to the broken-specs list when `spack install` raises a SpackError,
instead of writing to this list unnecessarily when infrastructure-related problems
prevent a develop job from completing successfully.
If two Specs have the same hash (and prefix) but are not equal, Spack
originally had logic to detect this and raise an error (since both
cannot be installed in the same place). Recently this has eroded and
the check no-longer works; moreover, when defining projections (which
may truncate the hash or other distinguishing properties from the
prefix) Spack was also failing to detect collisions (in both of these
cases, Spack would overwrite the old prefix with the new Spec).
This PR maintains a list of all "taken" prefixes: if a hash is not
registered (i.e. recorded as installed in the database) but the prefix
is occupied, that is a collision. This can detect collisions created
by defining projections (specifically when they omit the hash).
The PR does not detect collisions where specs have the same hash
(and prefix) but are not equal.
Fix syntax of conflict between numpy 1.21.0 and gcc11 to that the clingo
concretizer recognizes it.
In addition the upstream master branch was renamed to main.
* Switch hdf5 package from autotools to cmake.
* Add variant for building with zlib, default to ON.
* Update for format requirements.
* Format change.
* Fix breakage from last merge from develop.
Switch szip to use libaec (unrestricted encryption).
Remove 'static' variant: static libs will only be installed when
~shared.
* Improve args based on suggestions from pull request.
* Update code URL to github.com
Add/modify 4 depends_on lines to fix running "spack graph --deptype=link hdf5".
* Remove trailing whitespace.
* Remove dependencies added solely to make "spack greph --type=link" work.
* Add new version HDF5 1.8.22.
* Remove unnecessary java_check.
* Fix whitespace for style checks.
* Reverted zlib version dependency to 1.1.2:.
zlib variant removed.
api version default renamed "default".
* Remove blank line.
* Whitespace corrections.
* iRemoved unnecessary 'debug' variant.
* Fix typo in version number in conflict for '+szip'.
* Set default for tools variant to True.
Remove patch functions dependent on 'libtool' file that cmake doesn't
produce.
* Remove line to set ONLY_SHARED_LIBS to true.
Add post_install code to install only one version of tools with shared
linkage and original tool names.
* Remove trailing white space and import of glob package not used.
* Leave BUILD_TESTING set to default which is ON.
* Remove post_install code to install only one version of tools because
some dependent packages running tests in e4s testing are using
h5diff-shared. Keep both tools versions for now.
* No longer need to import os.
Instead of refusing to build +mpi with gcc10, add what I guess is now
the standard workaround, ie., `-fallow-argument-mismatch`.
Getting this into pfunit's cmake-based but kinda non-standard build isi
a bit ugly, but you gotta do what you gotta do...
Version 1.17 of DD4hep was renamed from "01-17-00" to "01-17", in line
with the naming conventions of previous releases. Since release archives
contain a subdirectory with the version string in it, this changes the contents
of the tarball ever so slightly, so the SHA-256 checksum must change as well.
Fix url to find newer versions, add newest version 4.0.2 and add
variants for
- cxxstd: To use a specific c++ standard
- static: Enable or disable build of static libraries
- boost: Boost support
- sqlite: SQLite support
- postgresql: PostgreSQL support
When having a few packages loaded, installing go-bootstrap will fail
because the `PATH` variable is truncated at 4096 bytes. Increase the
limit to 128 KiB to make longer paths fit.
1. "+simplex" conflicts with "dealii@:9.2" [The interface to simplex is supported from version 9.3.0 onwards. Please explicitly disable this variant via ~simplex]
2. "+arborx" conflicts with "dealii@:9.2" [The interface to arborx is supported from version 9.3.0 onwards. Please explicitly disable this variant via ~arborx]
Prior to any Spack build, Spack modifies PATH etc. to help the build
find the dependencies it needs. It also allows any package to define
custom environment modifications (and furthermore a package can
specify environment modifications to apply when it is used as a
dependency). If an external package defines custom environment
modifications that alter PATH, and the external package is in a merged
or system prefix, then that prefix could "override" the Spack-built
packages.
This commit reorders environment modifications so that PrependPath
actions which expose Spack-built packages override PrependPath actions
for custom environment modifications of external packages.
In more detail, the original order of environment modifications is:
* Modules
* Compiler flag variables
* PATH, CMAKE_PREFIX_PATH, and PKG_CONFIG_PATH for dependencies
* Custom package.py modifications in the following order:
* dependencies
* root
This commit changes the order:
* Modules
* Compiler flag variables
* For each external dependency
* PATH, CMAKE_PREFIX_PATH, and PKG_CONFIG_PATH modifications
* Custom modifications
* For each Spack-built dependency
* PATH, CMAKE_PREFIX_PATH, and PKG_CONFIG_PATH modifications
* Custom modifications
Spack pipelines need to take specific actions internally that depend
on whether the pipeline is being run on a PR to spack or a merge to
the develop branch. Pipelines can also run in other repositories,
which represents other possible use cases than just the two mentioned
above. This PR creates a "SPACK_PIPELINE_TYPE" gitlab variable which
is propagated to rebuild jobs, and is also used internally to determine
which pipeline-specific tasks to run.
One goal of the PR is fix an issue where rebuild jobs which failed on
develop pipelines did not properly report the broken full hash to the
"broken-specs-url".
* Add Externally Findable section to info command
* Use comma delimited detection attributes in addition to boolean value
* Unit test externally detectable part of spack info
yes I know this name isn't popular but that's the way it is right now.
master and the upcoming v5.0.x release branch use git submodules.
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
* [py-xxhash] created template
* [py-xxhash] working on dependencies
* [py-xxhash] set version for xxhash
* [py-xxhash] Final cleanup
- added homepage
- added description
- removed fixmes
* Force the Python interpreter with an env variable
This commit forces the Python interpreter with an
environment variable, to ensure that the Python set
by the "setup-python" action is the one being used.
Due to the policy adopted by Spack to prefer python3
over python we may end up picking a Python 3.X
interpreter where Python 2.7 was meant to be used.
* Revert "Update conftest.py (#24473)"
This reverts commit 477c8ce820.
* Make python-dateutil a soft dependency for unit tests
Before #23212 people could clone spack and run
```
spack unit-tests
```
while now this is not possible, since python-dateutil is
a required but not vendored dependency. This change makes
it not a hard requirement, i.e. it will be used if found
in the current interpreter.
* Workaround mypy complaint
This commit fixes a subtle bug that may occur when
a package is a "possible_provider" of a virtual but
no "provides_virtual" can be deduced. In that case
the cardinality constraint on "provides_virtual"
may arbitrarily assign a package the role of provider
even if the constraints for it to be one are not fulfilled.
The fix reworks the logic around three concepts:
- "possible_provider": a package may provide a virtual if some constraints are met
- "provides_virtual": a package meet the constraints to provide a virtual
- "provider": a package selected to provide a virtual
Spack packages can now fetch versions from CVS repositories. Note
this fetch mechanism is unsafe unless using :extssh:. Most public
CVS repositories use an insecure protocol implemented as part of CVS.
Here we are adding an install_times.json into the spack install metadata folder.
We record a total, global time, along with the times for each phase. The type
of phase or install start / end is included (e.g., build or fail)
Signed-off-by: vsoch <vsoch@users.noreply.github.com>
Co-authored-by: vsoch <vsoch@users.noreply.github.com>
The original implementation of `flag_handler` searched the
`self.compiler.cc` string for `clang` or `gcc` in order to add a flag
for those compilers. This approach fails when using a spack-installed
compiler that was itself built with gcc or clang, as those strings will
appear in the fully-qualified compiler executable paths. This commit
switches to searching for `%gcc` or `%clang` in `self.spec`.
Co-authored-by: Paul Henning <phenning@lanl.gov>
the 4.1.1 release has fixes for problems that kept 4.1.0 from
being the default open mpi version to build using spack.
related to #24396
Signed-off-by: Howard Pritchard <hppritcha@gmail.com>
* remove blueos check on cuda variant, fix typo
* restore necessary compiler guard
* remove axom+cuda from testing because it only partially works outside ppc systems
This PR does the following:
- adds version corresponding to commit at 08/03/2020
- adds missing get_DE_events.py script
- adds dependencies needed by get_DE_events.py
- removes REDItoolDenovo.py.patch and python2to3.patch in favor of
running 2to3 and reindent pre-build
- add batch_sort.patch to handle differences in string/char handling
betweeen python2 and python3
- adds a variant for the Nature Protocol
- adds dependencies for the nature_protocol variant
- added myself as maintainer
This PR adds a new version of reditools from git.
This PR fixes a couple of issues with the opencv package, mostly in
relation to cuda. This is only focused on cuda, not any of the other
variants.
- Added versions to the contrib_vers list. Added for all that can be
retrieved from github. The one for the latest version was missing.
- Added a cmake patch for v3.2.0.
- Deprecated versions 3.1.0 and 3.2.0 as neither of those could be
built, with or without cuda.
- Adjusted constraints on applying initial cmake patch.
- Added cudnn dependency when +cuda.
- Set constraints for cudnn and cuda for older versions of opencv.
Add a new "spack audit" command. This command can check for issues
with configuration or with packages and is intended to help a
user debug a failed Spack build.
In some cases the reported issues are always errors but are too
costly to check for (e.g. packages that specify missing variants on
dependencies). In other cases the issues may be legitimate but
uncommon usage of Spack and we want to be sure the user intended the
behavior (e.g. duplicate compiler definitions).
Audits are grouped by theme, and for now the two themes are packages
and configuration. For example you can run all available audits
on packages with "spack audit packages". It is intended that in
the future users will be able to define their own audits.
The package audits are good candidates for running in package_sanity
(i.e. they could catch bugs in user-submitted packages before they
are merged) but that is left for a later PR.
Building magma has been failing consistently and is currently
blocking PRs from being merged. Disable that spec while we
investigate the failure and work on a fix.
This should get us most of the way there to support using monitor during a spack container build, for both Singularity and Docker. Some quick notes:
### Docker
Docker works by way of BUILDKIT and being able to specify --secret. What this means is that you can prefix a line with a mount of type secret as follows:
```bash
# Install the software, remove unnecessary deps
RUN --mount=type=secret,id=su --mount=type=secret,id=st cd /opt/spack-environment && spack env activate . && export SPACKMON_USER=$(cat /run/secrets/su) && export SPACKMON_TOKEN=$(cat /run/secrets/st) && spack install --monitor --fail-fast && spack gc -y
```
Where the id for one or more secrets corresponds to the file mounted at `/run/secrets/<name>`. So, for example, to build this container with su (spackmon user) and sv (spackmon token) defined I would export them on my host and do:
```bash
$ DOCKER_BUILDKIT=1 docker build --network="host" --secret id=st,env=SPACKMON_TOKEN --secret id=su,env=SPACKMON_USER -t spack/container .
```
And when we add `env` to the secret definition that tells the build to look for the secret with id "st" in the environment variable `SPACKMON_TOKEN` for example.
If the user is building locally with a local spack monitor, we also need to set the `--network` to be the host, otherwise you can't connect to it (a la isolation of course.)
## Singularity
Singularity doesn't have as nice an ability to clearly specify secrets, so (hoping this eventually gets implemented) what I'm doing now is providing the user instructions to write the credentials to a file, add it to the container to source, and remove when done.
## Tags
Note that the tags PR https://github.com/spack/spack/pull/23712 will need to be merged before `--monitor-tags` will actually work because I'm checking for the attribute (that doesn't exist yet):
```bash
"tags": getattr(args, "monitor_tags", None)
```
So when that PR is merged to update the argument group, it will work here, and I can either update the PR here to not check if the attribute is there (it will be) or open another one in the case this PR is already merged.
Finally, I added a bunch of documetation for how to use monitor with containerize. I say "mostly working" because I can't do a full test run with this new version until the container base is built with the updated spack (the request to the monitor server for an env install was missing so I had to add it here).
Signed-off-by: vsoch <vsoch@users.noreply.github.com>
Co-authored-by: vsoch <vsoch@users.noreply.github.com>
Inline codecov annotations make the code hard to read, and they add annotations
in files that seemingly have nothing to do with the PR. Sadly, they add a whole
lot of noise and not a lot of benefit over looking at the PR on codecov. We
should just have people look at the coverage on codecov itself.
* New package: py-pyusb
Change-Id: I606127858b961b5841c60befc5a8353df0f9f38c
* fixup dependencies
Change-Id: I0c9b0ccee693d2c4e847717950d4ce64cb319794
* fixup 2
Change-Id: Ibaccbdafd865e363564f491054e4e4ceb778727b
* Update var/spack/repos/builtin/packages/py-pyusb/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
A patch no longer applies cleanly as its fixed in v4.0.6 - fix it here
==> Installing openmpi-4.0.6-in47f6rxspbnyibkdx6x4ekg6piujobd
==> No binary for openmpi-4.0.6-in47f6rxspbnyibkdx6x4ekg6piujobd found: installing from source
==> Fetching https://download.open-mpi.org/release/open-mpi/v4.0/openmpi-4.0.6.tar.bz2
Reversed (or previously applied) patch detected! Assume -R? [n]
Apply anyway? [n]
2 out of 2 hunks ignored -- saving rejects to file opal/include/opal/sys/gcc_builtin/atomic.h.rej
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
When running executables from build dependencies, we want to avoid that
`LD_PRELOAD` and `DYLD_INSERT_LIBRARIES` any of their shared libs build
by spack with system libraries.
The Z3 solver provides a Z3Config.cmake file when built using the CMake build
system. This submission changes the package build system to inherit the
CMakePackage type. In addition to changing the build system, this submission:
- Adds the GMP variant
- Removes v4.4.0 and v4.4.1 as CMake was implemented starting with v4.5.0
This adds a package for `irep`, a tool for reading `lua` input decks from
Fortran, C, and C++.
`irep` can be built with either `lua` or `luajit`. To address this, we also add
a virtual package for lua called `lua-lang`. `luajit` isn't, by default, a drop-in
replacement for `lua`, but we add a `+lualinks` variant to it that adds symlinks
that make it behave like `lua@5.1`. With this variant enabled, it provides the
`lua-lang` virtual. `lua` always provides `lua-lang`.
- [x] add `irep` package
- [x] add `+lualinks` variant to `lua-luajit`
- [x] create `lua-lang` virtual, provided by `lua` and `luajit+lualinks`
Co-authored-by: Kayla Richarda Butler <butler59@quartz1148.llnl.gov>
Co-authored-by: Todd Gamblin <tgamblin@llnl.gov>
* libdrm: fix one configure error and require libpciaccess
Failure with `LIBS`: the linker can't find `-lrt` so configure fails on
darwin-bigsur %apple-clang@12.0.5
```
>> 22 configure: error: in `/private/var/folders/gy/mrg1ffts2h945qj9k29s1l1dvvmbqb/T/s3j/spack-s
tage/spack-stage-libdrm-2.4.100-ofhk6m25n2pi427ihnxmvjkfmgyzlrqc/spack-src':
>> 23 configure: error: C compiler cannot create executables
24 See `config.log' for more details
See build log for details:
/var/folders/gy/mrg1ffts2h945qj9k29s1l1dvvmbqb/T/s3j/spack-stage/spack-stage-libdrm-2.4.100-ofhk6m25n2pi427ihnxmvjkfmgyzlrqc/spack-build-out.txt
```
* libpciaccess: Mark conflict with darwin
```
make[2]: *** [common_init.lo] Error 1
make[2]: *** Waiting for unfinished jobs....
common_interface.c:75:10: fatal error: 'sys/endian.h' file not found
^~~~~~~~~~~~~~
```
and
```
common_init.c:73:3: error: "Unsupported OS"
```
and others
* extending example for buildcaches
I was attempting to create a local build cache from a directory, and I found the
docs for both buildcaches and mirrors, but did not connect the docs that the
url variable could be the local filesystem variable. I am extending the docs for
buildcaches with an example of creating and interacting with one on the filesystem
because I suspect other users will run into this need and possibly not find what
they are looking for.
Signed-off-by: vsoch <vsoch@users.noreply.github.com>
* adding as follows to spack mirror list
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
Co-authored-by: vsoch <vsoch@users.noreply.github.com>
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
* update url, add all new versions and fix installation
* add wxparaver package and set the old paraver package as deprecated
* remove update of deprecated package
* remove old version from new wxparaver
* Update url
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
It is currently kind of confusing to the reader to distinguish spack buildcache install
and spack install, and it is not clear how to use a build cache once a mirror is added.
Hopefully this little big of description can help (and I hope I got it right!)
Signed-off-by: vsoch <vsoch@users.noreply.github.com>
Co-authored-by: vsoch <vsoch@users.noreply.github.com>
Use the 'version_yearlike' attribute instead of 'version' to
check if the SPACK_COMPILER_EXTRA_RPATHS should be set to include
the built-in 'libfabrics'.
When using the bare 'version', the comparison is wrong when
building with 'intel-parallel-studio', which has the version
format '<edition>.YYYY.Nupdate', due to the leading '<edition>'.
xfsprogs currently does not install with error message:
FATAL ERROR: could not find a valid ini.h header.
Adding this package libinih, and including it as
a dependency for xfsprogs seems to fix the issue. It could be
that we only need to add it for newer versions (if it worked before)
and maybe a maintainer can comment on that.
Signed-off-by: vsoch <vsoch@users.noreply.github.com>
Co-authored-by: vsoch <vsoch@users.noreply.github.com>
Pagination on Github prevent spack from easily parse all available
versions. Also, due to recent migration to GitHub, tarballs for
versions up to 3.12.13 have be regenerated, changing the hash.
The current URL will apparently be supported, so we keep it, and give
the alternative one as a comment.
This should fix#24278
$INSTALLDIR/lib/python3.7/site-packages/IPython/core/events.py contains an
import from backcall even in @7.3.0, so dependency on py-backcall needs
to start earlier.
Restrict poppler version for texlive to poppler@:0.84
Should fix#19946
See also https://github.com/NixOS/nixpkgs/issues/79170
Looks like poppler@0.84 upgraded their header files to use the C++ cstdio
instead of the C stdio.h. Since TeX is using C, not C++. this causes problems.
* zfp: several package improvements
- add variants for build targets, language bindings, backends
- ensure selected variants are compatible with zfp version
- point to GitHub (not LLNL) tar balls
- add dependencies
- update link to homepage
- add maintainers
* zfp: address suggestions by Spack team
- use conflicts() instead of raising exceptions
- use define() and define_from_variant() where applicable
* Apply suggestions from code review
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
* Fix ZFP OpenMP build.
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
* [py-keyboard] created template
* [py-keyboard]
- updated homepage
- added dependency for OSX
- added description
- removed fixmes
* [py-keyboard] Until py-pyobjc can be created, specifying conflict with platform=darwin
* [py-keyboard] is verb
* Update of Flecsi Spackage
Update of flecsi spackage to reconcile differences between flecsi@1:1.9
and flecsi@2: for future support purposes
* Removing Unnecessary Conditional
Removing unused conditional. Initially the plan was to switch based on
version in `cmake_args` but this was not necessary as build system
variable names remained mostly the same and conflicts prevent the rest.
For the most part, if a variant is there it does not need to check
against what version of the code is being built.
* Updated CI To Reconcile Flecsi Changes
Updated CI to target flecsi@1.4.2 which best matches the previous
release version and reconciled change in variant name
The common.inc script in TBB uses the environ var 'OS' to determine
the platform it's on. On Linux, this is normally empty and TBB falls
back to uname. But some systems set this to 'CentOS Linux 8' which is
descriptive, but not exactly what common.inc is looking for.
Instead, take the value from python and explicitly set OS to what TBB
expects to avoid this problem.
Since the two packages share a common history, the installation
procedure has been factored into a common base class.
Signed-off-by: vsoch <vsoch@users.noreply.github.com>
* Tcl: fix TCLLIBPATH
* Fix TCL|TK|TIX_LIBRARY paths
* Fix TCL_LIBRARY, no tcl8.6 subdir
* Don't rely on os.listdirs sorting
For tcl and tk, we also install the source directory, so there are
two init.tcl and tk.tcl locations. We want the one in lib/lib64,
which should come before the one in share.
* Add more patches
* Fix dylib on macOS
* Tk: add smoke tests
* Tix: add smoke test
Extracting specs for the result of a solve has been factored
as a method into the asp.Result class. The method account for
virtual specs being passed as initial requests.
Minimizing compiler mismatches in the DAG and preferring newer
versions of packages are now higher priority than trying to use as
many default values as possible in multi-valued variants.
According to the docs, r is needed for plotting, but plotting is
untested. In addition, the specific version requirement of java for gatk
could lead to multiple installations of r being triggered in an
environment. That might cause people to have to be deliberate about
java in a deployment. All in all, it seems that r is better as a
variant for gatk.
* Set job_id for SGE in darshan-runtime package
* Use a multi value variant for scheduler
Only one scheduler can be selected so make the variant multi valued and
set multi=False.
* hdf-eos5: Fix issue when linking against hdf5+szip (#23411)
Should fix issue #23411 when linking against hdf5+szip
Also fix bug if hdf5 does not depend on zlib
Reluctantly added payerle as a maintainer
Added version 1.1.13
Fixed versions for dependencies based on README.md for package
In particular:
* versions 1.1.x require python@3, at least 3.4 and for 1.1.13 at least 3.6
* py-osqp had been pinned to version 0.4.1, but README.md either shows
no version restriction, of 0.4.1 and higher
* @1.1.13 requires at least 1.1.6 of py-scs
* I am assuming since 1.1.x is python@3 only, py-six no longer required
(it was not explicitly showing up in README.md for these versions)
Since the module roots were removed from the config file,
`--print-shell-vars` cannot find the module roots anymore. Fix it by
using the new `root_path` function. Moreover, the roots for lmod and
modules seems to have been flipped by accident.
* add versions 2.2.0.2 and 2.2.1.1
* Add maintainer
Added Ishaan as additional maintainer as he is also maintainer of the Python bindings
* add new major precice version as dependency
The VALID_VERSION regex didn't check that the version string was
completely valid, only that a prefix of it was. This version ensures
the entire string represents a valid version.
This makes a few related changes.
1. Make the SEGMENT_REGEX identify *which* arm it matches by what groups
are populated, including whether it's a string or int component or a
separator all at once.
2. Use the updated regex to parse the input once with a findall rather
than twice, once with findall and once with split, since the version
components and separators can be distinguished by their group status.
3. Rather than "convert to int, on exception stay string," if the int
group is set then convert to int, if not then construct an instance
of the VersionStrComponent class
4. VersionStrComponent now implements all of the special string
comparison logic as part of its __lt__ and __eq__ methods to deal
with infinity versions and also overloads comparison with integers.
5. Version now uses direct tuple comparison since it has no per-element
special logic outside the VersionStrComponent class.
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
* New Package:py-haphpipe@1.0.3
* removed llvm restrict. & changed freebayes
* Style fix
* Removed pip, wheel, added url for deps list
* used proper gsutil naming
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* url src for deps, samtools fix
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* petsc: add hip variant
* libceed: add 0.8, disable occa by default, and let autodetect AVX
Disabling OCCA because backend updates did not make this release and
there are some known bugs so most users won't have reason to use OCCA.
https://github.com/CEED/libCEED/pull/688
* WIP: ceed: 4.0 release
* MFEM package updates (#19748)
* MFEM package updates
* mfem: flake8
* [mfem] Various fixes and tweaks.
[arpack-ng] Add a patch to fix building with IBM XL Fortran.
[libceed] Fix building with IBM XL C/C++.
[pumi] Add C++11 flag for version 2.2.3.
* [mfem] Fix the shared CUDA build.
Reported by: @MPhysXDev
* [mfem] Fix a TODO item
* [mfem] Tweak the AmgX dependencies
* [suite-sparse] Fix the version of the mpfr dependency
* MFEM: add initial HIP support using the ROCmPackage.
* MFEM: add 'slepc' variant.
* MFEM: update the patch for v4.2 for SLEPc.
* mfem: apply 'mfem-4.2-slepc.patch' just to v4.2.
* ceed: apply 'spack style'
* [mfem] Add a patch for mfem v4.2 to work with petsc v3.15.0.
[laghos] Add laghos version 3.1 based on the latest commit in
the repository; this version works with mfem v4.2.
[ceed] For ceed v4.0 use laghos v3.1.
* [libceed] Explicitly set 'CC_VENDOR=icc' when using 'intel'
compiler.
* [mfem] Allow pumi >= 2.2.3 with mfem >= 4.2.0.
[ceed] Use pumi v2.2.5 with ceed v4.0.0.
* [ceed] Explicitly use occa v1.1.0 with ceed v4.0.0.
Use mfem@4.2.0+rocm with ceed@4.0.0+mfem+hip.
* [ceed] Add NekRS v21 as a dependency for ceed v4.0.0.
* [ceed] Fix NekRS version: 21 --> 21.0
* [ceed] Propagate +cuda variant to petsc for ceed v4.0.
* [mfem] Propagate '+rocm' variant to some other packages.
* [ceed] Use +rocm variant of nekrs instead of +hip.
* [ceed] Do not enable magma with ceed@4.0.0+hip.
* [libceed] Fix hip build with libceed@0.8.
* [laghos] For v3.1, use the release .tar.gz file instead of commit.
* Remove cuda & hip variants as they are inherited
* [ceed] Remove comments and FIXMEs about 'magma+hip'.
* [ceed] [libceed] Remove TODOs about occa + hip.
* libceed: use ROCmPackage and +rocm
* petsc: use ROCmPackage for HIP
* libceed, petsc: use CudaPackage
* ceed: forward cuda_arch and amdgpu_target
* [mfem] Use Spack's CudaPackage as a base class; as a result,
'cuda_arch' values should not include the 'sm_' prefix.
Also, propagate 'cuda_arch' and 'amdgpu_target' variants
to enabled dependencies.
* petsc: variant is +rocm, package name is hip
Co-authored-by: Jed Brown <jed@jedbrown.org>
Co-authored-by: Thilina Rathnayake <thilinarmtb@gmail.com>
Passing absolute paths from pipeline generate job to downstream rebuild jobs
causes problems when the CI_PROJECT_DIR is not the same for the generate and
rebuild jobs. This has happened, for example, when gitlab checks out the
project into a runner-specific directory and different runners are chosen
for the generate and rebuild jobs.
* ensure that the stage root exists for `spack stage -p <PATH>`
* add test to verify `spack stage -p <PATH>` works!
* move out shared tmp staging path setup to a fixture to fix the test
* Simplified the spack.util.gpg implementation
All the classes defined in this Python module,
which were previously used to construct singleton
instances, have been removed in favor of four
global variables. These variables are initialized
lazily, like before.
The API of the module has been unchanged for the
most part. A few tests have been modified to use
the new global names.
1. add version 2021.05.15.
2. add patch to build old revs with gcc 11.x, version 2021.15.05
already has patch integrated, fixes#23667.
3. add variant +debug to build unoptimized, debug version.
4. add variant +viewer to include hpcviewer and add viewer path to
hpctoolkit module.
5. add dependency on memkind to workaround a glibc problem found on
some Cray platforms.
For me the buildcache force overwrite option does not work. It tries to
delete a file, but errors with a key error, apparently because the
leading / has to be removed.
* util.tty.log: read up to 100 lines if ready
Rework to read up to 100 lines from the captured stdin as long as data
is ready to be read immediately. Adds a helper function to poll with
`select` for ready data. This showed a roughly 5-10x perf improvement
for high-rate writes through the logger with relatively short lines.
* util.tty.log: Defer flushes to end of ready reads
Rather than flush per line, flush per set of reads. Since this is a
non-blocking loop, the total perceived wait is short.
* util.tty.log: only scan each line once, usually
Rather than always find all control characters then substitute them all,
use `subn` to count the number of control characters replaced. Only if
control characters exist find out what they are. This could be made
truly single pass with sub with a function, but it's a more intrusive
change and this got 99%ish of the performance improvement (roughly
another 2x in some cases).
* util.tty.log: remove check for `readable`
Python < 3 does not support a readable check on streams, should not be
necessary here since we control the only use and it's explicitly a
stream to be read.
* e4s ci: enable full e4s
* add llvm-amdgpu to list of specs needing an xlarge tagged runner
* comment out qt and qwt because of intermittent build failures
* remove +rocm specs because rocblas job consistently fails due to infrastructure
* qt: skip multimedia when ~opengl
On 5.9 on macOS the multimedia option causes build errors; on other
platforms and versions it should probably be assumed inoperative anyway.
* qt: Omit flags when disabling multimedia
```
ERROR: Unknown command line option '-no-pulseaudio'.
```
* Work around another qt@5.9 error
* qt: Fix build error on darwin
This PR allows users to `--export`, `--export-secret`, or both to export GPG keys
from Spack. The docs are updated that include a warning that this usually does not
need to be done.
This addresses an issue brought up in slack, and also represented in #14721.
Signed-off-by: vsoch <vsoch@users.noreply.github.com>
Co-authored-by: vsoch <vsoch@users.noreply.github.com>
Currently, module configurations are inconsistent because modulefiles are generated with the configs for the active environment, but are shared among all environments (and spack outside any environment).
This PR fixes that by allowing Spack environments (or other spack config scopes) to define additional sets of modules to generate. Each set of modules can enable either lmod or tcl modules, and contains all of the previously available module configuration. The user defines the name of each module set -- the set configured in Spack by default is named "default", and is the one returned by module manipulation commands in the absence of user intervention.
As part of this change, the module roots configuration moved from the config section to inside each module configuration.
Additionally, it adds a feature that the modulefiles for an environment can be configured to be relative to an environment view rather than the underlying prefix. This will not be enabled by default, as it should only be enabled within an environment and for non-default views constructed with separate projections per-spec.
* New Package:py-ucsf-pyem
* Dep additions, eun env deletion
* extraction step change
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
### Overview
The goal of this PR is to make gitlab pipeline builds (especially build failures) more reproducible outside of the pipeline environment. The two key changes here which aim to improve reproducibility are:
1. Produce a `spack.lock` during pipeline generation which is passed to child jobs via artifacts. This concretized environment is used both by generated child jobs as well as uploaded as an artifact to be used when reproducing the build locally.
2. In the `spack ci rebuild` command, if a spec needs to be rebuilt from source, do this by generating and running an `install.sh` shell script which is then also uploaded as a job artifact to be run during local reproduction.
To make it easier to take advantage of improved build reproducibility, this PR also adds a new subcommand, `spack ci reproduce-build`, which, given a url to job artifacts:
- fetches and unzips the job artifacts to a local directory
- looks for the generated pipeline yaml and parses it to find details about the job to reproduce
- attempts to provide a copy of the same version of spack used in the ci build
- if the ci build used a docker image, the command prints a `docker run` command you can run to get an interactive shell for reproducing the build
#### Some highlights
One consequence of this change will be much smaller pipeline yaml files. By encoding the concrete environment in a `spack.lock` and passing to child jobs via artifacts, we will no longer need to encode the concrete root of each spec and write it into the job variables, greatly reducing the size of the generated pipeline yaml.
Additionally `spack ci rebuild` output (stdout/stderr) is no longer internally redirected to a log file, so job output will appear directly in the gitlab job trace. With debug logging turned on, this often results in log files getting truncated because they exceed the maximum amount of log output gitlab allows. If this is a problem, you still have the option to `tee` command output to a file in the within the artifacts directory, as now each generated job exposes a `user_data` directory as an artifact, which you can fill with whatever you want in your custom job scripts.
There are some changes to be aware of in how pipelines should be set up after this PR:
#### Pipeline generation
Because the pipeline generation job now writes a `spack.lock` artifact to be consumed by generated downstream jobs, `spack ci generate` takes a new option `--artifacts-root`, inside which it creates a `concrete_env` directory to place the lockfile. This artifacts root directory is also where the `user_data` directory will live, in case you want to generate any custom artifacts. If you do not provide `--artifacts-root`, the default is for it to create a `jobs_scratch_dir` within your `CI_PROJECT_DIR` (a gitlab predefined environment variable) or whatever is your current working directory if that variable isn't set. Here's the diff of the PR testing `.gitlab-ci.yml` taking advantage of the new option:
```
$ git diff develop..pipelines-reproducible-builds share/spack/gitlab/cloud_pipelines/.gitlab-ci.yml
diff --git a/share/spack/gitlab/cloud_pipelines/.gitlab-ci.yml b/share/spack/gitlab/cloud_pipelines/.gitlab-ci.yml
index 579d7b56f3..0247803a30 100644
--- a/share/spack/gitlab/cloud_pipelines/.gitlab-ci.yml
+++ b/share/spack/gitlab/cloud_pipelines/.gitlab-ci.yml
@@ -28,10 +28,11 @@ default:
- cd share/spack/gitlab/cloud_pipelines/stacks/${SPACK_CI_STACK_NAME}
- spack env activate --without-view .
- spack ci generate --check-index-only
+ --artifacts-root "${CI_PROJECT_DIR}/jobs_scratch_dir"
--output-file "${CI_PROJECT_DIR}/jobs_scratch_dir/cloud-ci-pipeline.yml"
artifacts:
paths:
- - "${CI_PROJECT_DIR}/jobs_scratch_dir/cloud-ci-pipeline.yml"
+ - "${CI_PROJECT_DIR}/jobs_scratch_dir"
tags: ["spack", "public", "medium", "x86_64"]
interruptible: true
```
Notice how we replaced the specific pointer to the generated pipeline file with its containing folder, the same folder we passed as `--artifacts-root`. This way anything in that directory (the generated pipeline yaml, as well as the concrete environment directory containing the `spack.lock`) will be uploaded as an artifact and available to the downstream jobs.
#### Rebuild jobs
Rebuild jobs now must activate the concrete environment created by `spack ci generate` and provided via artifacts. When the pipeline is generated, a directory called `concrete_environment` is created within the artifacts root directory, and this is where the `spack.lock` file is written to be passed to the generated rebuild jobs. The artifacts root directory can be specified using the `--artifacts-root` option to `spack ci generate`, otherwise, it is assumed to be `$CI_PROJECT_DIR`. The directory containing the concrete environment files (`spack.yaml` and `spack.lock`) is then passed to generated child jobs via the `SPACK_CONCRETE_ENV_DIR` variable in the generated pipeline yaml file.
When you don't provide custom `script` sections in your `mappings` within the `gitlab-ci` section of your `spack.yaml`, the default behavior of rebuild jobs is now to change into `SPACK_CONCRETE_ENV_DIR` and activate that environment. If you do provide custom rebuild scripts in your `spack.yaml`, be aware those scripts should do the same thing: assume `SPACK_CONCRETE_ENV_DIR` contains the concretized environment to activate. No other changes to existing custom rebuild scripts should be required as a result of this PR.
As mentioned above, one key change made in this PR is the generation of the `install.sh` script by the rebuild jobs, as that same script is both run by the CI rebuild job as well as exported as an artifact to aid in subsequent attempts to reproduce the build outside of CI. The generated `install.sh` script contains only a single `spack install` command with arguments computed by `spack ci rebuild`. If the install fails, the job trace in gitlab will contain instructions on how to reproduce the build locally:
```
To reproduce this build locally, run:
spack ci reproduce-build https://gitlab.next.spack.io/api/v4/projects/7/jobs/240607/artifacts [--working-dir <dir>]
If this project does not have public pipelines, you will need to first:
export GITLAB_PRIVATE_TOKEN=<generated_token>
... then follow the printed instructions.
```
When run locally, the `spack ci reproduce-build` command shown above will download and process the job artifacts from gitlab, then print out instructions you can copy-paste to run a local reproducer of the CI job.
This PR includes a few other changes to the way pipelines work, see the documentation on pipelines for more details.
This PR erelies on
~- [ ] #23194 to be able to refer to uninstalled specs by DAG hash~
EDIT: that is going to take longer to come to fruition, so for now, we will continue to install specs represented by a concrete `spec.yaml` file on disk.
- [x] #22657 to support install a single spec already present in the active, concrete environment
* embree: allow for compiling with gcc 7.3
strip out unsupported -mprefer-vector-width=256
* embree: fix build on AMD CPUs
The ISAs that embree is compiled for have to match the CPU
features enabled by the compiler, as embree derives theISA
that it compiles for from the latter.
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
Spack's source mirror was previously in a plain old S3 bucket. That will still
work, but we can do better. This switches to AWS's CloudFront CDN for hosting
the mirror.
CloudFront is 16x faster (or more) than the old bucket.
- [x] change mirror to https://mirror.spack.io
* New package:py-coveralls
* dep fixes
* added python constraint
* pyyaml version constraint
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
- [x] add `in_buildcache` field to DB records to indicate what parts of an index,
which includes roots and dependencies, are in the buildcache.
- [x] add `mark()` method to DB for setting values on single nodes of the DAG.
This also fixes the build with %gcc@11:. According to upstream, the
proper solution is to disable -Werror=array-bounds since the stable
branch will not receive a patch for newer compilers.
* Update py-pint and fix runtime dependency on setuptools
Without the runtime dependency on setuptools, importing pint yields:
0.11:
ModuleNotFoundError: No module named 'pkg_resources'
0.17:
ModuleNotFoundError: No module named 'packaging'
* Fix
* Address comments
I would like to be able to export (and save and then load programatically)
spack blame metadata, so this commit adds a spack blame --json argument,
along with developer docs for it
Signed-off-by: vsoch <vsoch@users.noreply.github.com>
Co-authored-by: vsoch <vsoch@users.noreply.github.com>
This work will come in two phases. The first here is to allow saving of a local result
with spack monitor, and the second will add a spack monitor command so the user can
do spack monitor upload.
Signed-off-by: vsoch <vsoch@users.noreply.github.com>
Co-authored-by: vsoch <vsoch@users.noreply.github.com>
Currently if one package does `depends_on('pkg default_library=shared')`
and another does `depends_on('pkg default_library=both')`, you'd get a
concretization error.
With this PR one package can do `depends_on('pkg default_library=shared')`
and another depends_on('default_library=static'), and it would concretize to
`pkg default_library=shared,static`
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
* Package update to version 1.0.2
* switched submodule boolean to string
* switched from string to bools
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
- Changed to cmake package with backward compatibility with older
makefile
- Removed unused cmake variable 'blas_blas_libs'
- Added new version 5.2.2 which change to external blas variable
- Remove unused tcsh dependency
- Change URL to use git repository for current and future versions
- Add older 4.2 version
- Add conflict for older versions with apple-clang
This adds RHEL8's `/usr/libexec/platform-python` to Spack's list of preferred
pythons. It will only be used if no other `python` is available in the `PATH`.
We have been testing with this python for a while now, and it seems to do all
that we need. If Spack one day isn't able to work with it, we'll take it out,
but for now it is useful to allow Spack to be used on RHEL8 without a dedicated
`python` installation.
Spack doesn't require users to manually index their repos; it reindexes the indexes automatically when things change. To determine when to do this, it has to `stat()` all package files in each repository to make sure that indexes up to date with packages. We currently index virtual providers, patches by sha256, and tags on packages.
When this was originally implemented, we ran the checker all the time, at startup, but that was slow (see #7587). But we didn't go far enough -- it still consults the checker and does all the stat operations just to see if a package exists (`Repo.exists()`). That might've been a wash in 2018, but as the number of packages has grown, it's gotten slower -- checking 5k packages is expensive and users see this for small operations. It's a win now to make `Repo.exists()` check files directly.
**Fix:**
This PR does a number of things to speed up `spack load`, `spack info`, and other commands:
- [x] Make `Repo.exists()` check files directly again with `os.path.exists()` (this is the big one)
- [x] Refactor `Spec.satisfies()` so that a checking for virtual packages only happens if needed
(avoids some calls to exists())
- [x] Avoid calling `Repo.exists(spec)` in `Repo.get()`. `Repo.get()` will ultimately try to load
a `package.py` file anyway; we can let the failure to load it indicate that the package doesn't
exist, and avoid another call to exists().
- [x] Fix up some comments in spec parsing
- [x] Call `UnknownPackageError` more consistently in `repo.py`
The ASP-based solver can natively manage cases where more than one root spec is given, and is able to concretize all the roots together (ensuring one spec per package at most).
Modifications:
- [x] When concretising together an environment the ASP-based solver calls directly its `solve` method rather than constructing a temporary fake root package.
The function we coded in Spack to load Python modules with arbitrary
names from a file seem to have issues with local imports. For
loading hooks though it is unnecessary to use such functions, since
we don't care to bind a custom name to a module nor we have to load
it from an unknown location.
This PR thus modifies spack.hook in the following ways:
- Use __import__ instead of spack.util.imp.load_source (this
addresses #20005)
- Sync module docstring with all the hooks we have
- Avoid using memoization in a module function
- Marked with a leading underscore all the names that are supposed
to stay local
fixes#22786
Trying to get optimization flags for a specific target from
a compiler may trigger warnings. In the context of constructing
facts for the ASP-based solver we don't want to show these
warnings to the user, so here we simply ignore them.
We remove system paths from search variables like PATH and
from -L options because they may contain many packages and
could interfere with Spack-built packages. External packages
may be installed to prefixes that are not actually system paths
but are still "merged" in the sense that many other packages are
installed there. To avoid conflicts, this PR places all external
packages at the end of search paths.
If you install packages using spack install in an environment with
complex spec constraints, and the install fails, you may want to
test out the build using spack build-env; one issue (particularly
if you use concretize: together) is that it may be hard to pass
the appropriate spec that matches what the environment is
attempting to install.
This updates the build-env command to default to pulling a matching
spec from the environment rather than concretizing what the user
provides on the command line independently.
This makes a similar change to spack cd.
If the user-provided spec matches multiple specs in the environment,
then these commands will now report an error and display all
matching specs (to help the user specify).
Co-authored-by: Gregory Becker <becker33@llnl.gov>
fixes#22294
A combination of the swapping order for global variables and
the fact that most of them are lazily evaluated resulted in
custom install tree not being taken into account if clingo
had to be bootstrapped.
This commit fixes that particular issue, but a broader refactor
may be needed to ensure that similar situations won't affect us
in the future.
fixes#22565
This change enforces the uniqueness of the version_weight
atom per node(Package) in the DAG. It does so by applying
FTSE and adding an extra layer of indirection with the
possible_version_weight/2 atom.
Before this change it may have happened that for the same
node two different version_weight/2 were in the answer set,
each of which referred to a different spec with the same
version, and their weights would sum up.
This lead to unexpected result like preferring to build a
new version of an external if the external version was
older.
* clingo: modify recipe for bootstrapping
Modifications:
- clingo builds with shared Python only if ^python+shared
- avoid building the clingo app for bootstrapping
- don't link to libpython when bootstrapping
* Remove option that breaks on linux
* Give more hints for the current Python
* Disable CLINGO_BUILD_PY_SHARED for bootstrapping
* bootstrapping: try to detect the current python from std library
This is much faster than calling external executables
* Fix compatibility with Python 2.6
* Give hints on which compiler and OS to use when bootstrapping
This change hints which compiler to use for bootstrapping clingo
(either GCC or Apple Clang on MacOS). On Cray platforms it also
hints to build for the frontend system, where software is meant
to be installed.
* Use spec_for_current_python to constrain module requirement
(cherry picked from commit d5fa509b07)
* ASP-based solver: avoid adding values to variants when they're set
fixes#22533fixes#21911
Added a rule that prevents any value to slip in a variant when the
variant is set explicitly. This is relevant for multi-valued variants,
in particular for those that have disjoint sets of values.
* Ensure disjoint sets have a clear semantics for external packages
fixes#22547
SingleFileScope was not able to repopulate its cache before this
change. This was affecting the configuration seen by environments
using clingo bootstrapped from sources, since the bootstrapping
operation involved a few cache invalidation for config files.
In most cases, we want condition_holds(ID) to imply any imposed
constraints associated with the ID. However, the dependency relationship
in Spack is special because it's "extra" conditional -- a dependency
*condition* may hold, but we have decided that externals will not have
dependencies, so we need a way to avoid having imposed constraints appear
for nodes that don't exist.
This introduces a new rule that says that constraints are imposed
*unless* we define `do_not_impose(ID)`. This allows rules like
dependencies, which rely on more than just spec conditions, to cancel
imposed constraints.
We add one special case for this: dependencies of externals.
We only consider test dependencies some of the time. Some packages are
*only* test dependencies. Spack's algorithm was previously generating
dependency conditions that could hold, *even* if there was no potential
dependency type.
- [x] change asp.py so that this can't happen -- we now only generate
dependency types for possible dependencies.
This builds on #20638 by unifying all the places in the concretizer where
things are conditional on specs. Previously, we duplicated a common spec
conditional pattern for dependencies, virtual providers, conflicts, and
externals. That was introduced in #20423 and refined in #20507, and
roughly looked as follows.
Given some directives in a package like:
```python
depends_on("foo@1.0+bar", when="@2.0+variant")
provides("mpi@2:", when="@1.9:")
```
We handled the `@2.0+variant` and `@1.9:` parts by generating generated
`dependency_condition()`, `required_dependency_condition()`, and
`imposed_dependency_condition()` facts to trigger rules like this:
```prolog
dependency_conditions_hold(ID, Parent, Dependency) :-
attr(Name, Arg1) : required_dependency_condition(ID, Name, Arg1);
attr(Name, Arg1, Arg2) : required_dependency_condition(ID, Name, Arg1, Arg2);
attr(Name, Arg1, Arg2, Arg3) : required_dependency_condition(ID, Name, Arg1, Arg2, Arg3);
dependency_condition(ID, Parent, Dependency);
node(Parent).
```
And we handled `foo@1.0+bar` and `mpi@2:` parts ("imposed constraints")
like this:
```prolog
attr(Name, Arg1, Arg2) :-
dependency_conditions_hold(ID, Package, Dependency),
imposed_dependency_condition(ID, Name, Arg1, Arg2).
attr(Name, Arg1, Arg2, Arg3) :-
dependency_conditions_hold(ID, Package, Dependency),
imposed_dependency_condition(ID, Name, Arg1, Arg2, Arg3).
```
These rules were repeated with different input predicates for
requirements (e.g., `required_dependency_condition`) and imposed
constraints (e.g., `imposed_dependency_condition`) throughout
`concretize.lp`. In #20638 it got to be a bit confusing, because we used
the same `dependency_condition_holds` predicate to impose constraints on
conditional dependencies and virtual providers. So, even though the
pattern was repeated, some of the conditional rules were conjoined in a
weird way.
Instead of repeating this pattern everywhere, we now have *one* set of
consolidated rules for conditions:
```prolog
condition_holds(ID) :-
condition(ID);
attr(Name, A1) : condition_requirement(ID, Name, A1);
attr(Name, A1, A2) : condition_requirement(ID, Name, A1, A2);
attr(Name, A1, A2, A3) : condition_requirement(ID, Name, A1, A2, A3).
attr(Name, A1) :- condition_holds(ID), imposed_constraint(ID, Name, A1).
attr(Name, A1, A2) :- condition_holds(ID), imposed_constraint(ID, Name, A1, A2).
attr(Name, A1, A2, A3) :- condition_holds(ID), imposed_constraint(ID, Name, A1, A2, A3).
```
this allows us to use `condition(ID)` and `condition_holds(ID)` to
encapsulate the conditional logic on specs in all the scenarios where we
need it. Instead of defining predicates for the requirements and imposed
constraints, we generate the condition inputs with generic facts, and
define predicates to associate the condition ID with a particular
scenario. So, now, the generated facts for a condition look like this:
```prolog
condition(121).
condition_requirement(121,"node","cairo").
condition_requirement(121,"variant_value","cairo","fc","True").
imposed_constraint(121,"version_satisfies","fontconfig","2.10.91:").
dependency_condition(121,"cairo","fontconfig").
dependency_type(121,"build").
dependency_type(121,"link").
```
The requirements and imposed constraints are generic, and we associate
them with their meaning via the id. Here, `dependency_condition(121,
"cairo", "fontconfig")` tells us that condition 121 has to do with the
dependency of `cairo` on `fontconfig`, and the conditional dependency
rules just become:
```prolog
dependency_holds(Package, Dependency, Type) :-
dependency_condition(ID, Package, Dependency),
dependency_type(ID, Type),
condition_holds(ID).
```
Dependencies, virtuals, conflicts, and externals all now use similar
patterns, and the logic for generating condition facts is common to all
of them on the python side, as well. The more specific routines like
`package_dependencies_rules` just call `self.condition(...)` to get an id
and generate requirements and imposed constraints, then they generate
their extra facts with the returned id, like this:
```python
def package_dependencies_rules(self, pkg, tests):
"""Translate 'depends_on' directives into ASP logic."""
for _, conditions in sorted(pkg.dependencies.items()):
for cond, dep in sorted(conditions.items()):
condition_id = self.condition(cond, dep.spec, pkg.name) # create a condition and get its id
self.gen.fact(fn.dependency_condition( # associate specifics about the dependency w/the id
condition_id, pkg.name, dep.spec.name
))
# etc.
```
- [x] unify generation and logic for conditions
- [x] use unified logic for dependencies
- [x] use unified logic for virtuals
- [x] use unified logic for conflicts
- [x] use unified logic for externals
LocalWords: concretizer mpi attr Arg concretize lp cairo fc fontconfig
LocalWords: virtuals def pkg cond dep fn refactor github py
This change accounts for platform specific configuration scopes,
like ~/.spack/linux, during bootstrapping. These scopes were
previously not accounted for and that was causing issues e.g.
when searching for compilers.
(cherry picked from commit 413c422e53)
* Allow the bootstrapping of clingo from sources
Allow python builds with system python as external
for MacOS
* Ensure consistent configuration when bootstrapping clingo
This commit uses context managers to ensure we can
bootstrap clingo using a consistent configuration
regardless of the use case being managed.
* Github actions: test clingo with bootstrapping from sources
* Add command to inspect and clean the bootstrap store
Prevent users to set the install tree root to the bootstrap store
* clingo: documented how to bootstrap from sources
Co-authored-by: Gregory Becker <becker33@llnl.gov>
(cherry picked from commit 10e9e142b7)
Bash has a builtin `fc` that will override the compiler if you use "fc",
so it's better to use the full spack-supplied compiler path.
Additionally, the filter regex in the docs was wrong: it replaced the
entire assignment operation with the RHS.
* py-kubernetes: add new package
* Apply suggestions from code review
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* py-kubernetes: remove alpha/beta versions, fix dependency types
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
This PR updates the abinit package. The underlying build system has
several changes from previous versions, which are reflected in the
package recipe.
- added version 9.4.2
- removed commented out code
- add new libxml2 variant, with dependency and conflicts
- add dependency on atompaw
- depend on fftw-api when ~openmp
This allows other fftw implementations to be used. This PR adds MKL.
- depend on netcdf explicitly
- remove hdf5 variant as hdf5 is required
- only use wannier90 if +mpi as the wannier90 spack package is MPI only
- allow newer versions of libxc for abinit 9
- split configure options for versions before and after abinit 9
- always use MPI compiler wrappers
- add patch to remove march settings for version 9
- Set conflict for fftw~openmp if abinit+openmp
This allows the virtual fftw-api to be used for the dependency. If fftw
is the fftw-api provider then bail if fftw~openmp is set when
abinit+openmp is used.
- Set conflicts for +openmp and mkl
- Be explicit about +mkl for intel-parallel-studio
- Add TODO entry for switching conflicts/depends_on logic
* clingo/clingo-bootstrap: added a package with option for bootstrapping clingo
package builds in Release mode
uses GCC options to link libstdc++ and libgcc statically
* clingo-bootstrap: apple-clang options to bootstrap statically on darwin
* clingo: fix the path of the Python interpreter
In case multiple Python versions are in the same prefix
(e.g. when clingo is built against an external Python),
it may happen that the Python used by CMake does not
match the corresponding node in the current spec.
This is fixed here by defining "Python_EXECUTABLE"
properly as a hint to CMake.
* clingo: the commit for "spack" version has been updated.
Most people installing `clingo` with Spack are going to be doing it to
use the new concretizer, and that requires the `master` branch.
- [x] make `master` the default so we don't have to keep telling people
to install `clingo@master`. We'll update the preferred version when
there's a new release.
* make `spack fetch` work with environments
* previously: `spack fetch` required the explicit statement of
the specs to be fetched, even when in an environment
* now: if there is no spec(s) provided to `spack fetch` we check
if an environment is active and if yes we fetch all
uninstalled specs.
* Update pylint to 2.8.2
* Update var/spack/repos/builtin/packages/py-pylint/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Address comments
* Update
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
This solves a few FIXMEs in conftest.py, where
we were manipulating globals and seeing side
effects prior to registering fixtures.
This commit solves the FIXMEs, but introduces
a performance regression on tests that may need
to be investigated
(cherry picked from commit 4558dc06e2)
The context manager can be used to swap the current
configuration temporarily, for any use case that may need it.
(cherry picked from commit 553d37a6d6)
The method is now called "use_repositories" and
makes it clear in the docstring that it accepts
as arguments either Repo objects or paths.
Since there was some duplication between this
contextmanager and "use_repo" in the testing framework,
remove the latter and use spack.repo.use_repositories
across the entire code base.
Make a few adjustment to MockPackageMultiRepo, since it was
stating in the docstring that it was supposed to mock
spack.repo.Repo and was instead mocking spack.repo.RepoPath.
(cherry picked from commit 1a8963b0f4)
There clingo-cffi job has two issues to be solved:
1. It uses the default concretizer
2. It requires a package from https://test.pypi.org/simple/
The former can be fixed by setting the SPACK_TEST_SOLVER
environment variable to "clingo".
The latter though requires clingo-cffi to be pushed to a
more stable package index (since https://test.pypi.org/simple/
is meant as a scratch version of PyPI that can be wiped at
any time).
For the time being run the tests in a container. Switch back to
PyPI whenever a new official version of clingo will be released.
* Support clingo when used with cffi
Clingo recently merged in a new Python module option based on cffi.
Compatibility with this module requires a few changes to spack - it does not automatically convert strings/ints/etc to Symbol and clingo.Symbol.string throws on failure.
manually convert str/int to clingo.Symbol types
catch stringify exceptions
add job for clingo-cffi to Spack CI
switch to potassco-vendored wheel for clingo-cffi CI
on_unsat argument when cffi
(cherry picked from commit 93ed1a410c)
* Improve error message for inconsistencies in package.py
Sometimes directives refer to variants that do not exist.
Make it such that:
1. The name of the variant
2. The name of the package which is supposed to have
such variant
3. The name of the package making this assumption
are all printed in the error message for easier debugging.
* Add unit tests
(cherry picked from commit 7226bd64dc)
The "fact" method before was dealing with multiple facts
registered per call, which was used when we were emitting
grounded rules from knowledge of the problem instance.
Now that the encoding is changed we can simplify the method
to deal only with a single fact per call.
(cherry picked from commit ba42c36f00)
* Modification to R environment
This PR modifies how the R environmnet is presented, and fixes
installing the standalone Rmath library.
- The Rmath build and install methods are combined into one
- Set parallel=False when installing Rmath
- remove the run environment that set up variables for libraries and
headers that are not really needed, and pollute the environment.
* Add setup_run_environment back
- Add back the setup_run_environment with LD_LIBRARY_PATH and
PKG_CONFIG_PATH.
- Adjust documentation to reflect the current code.
The previous `gasnet` spack package was not vetted/approved by the GASNet library maintainers. This one is.
Notably adds build-time testing and smoke-testing.
Convert network variants into a multi-valued `conduits` variant has the minor advantage of enabling a concise `conduits=none` spec, but the major drawback that it degrades the `spack info gasnet` output.
* py-lazyarray: add new version 0.3.2
Change-Id: Ie8a40f3ff1fe7477e27f6085b9ad6673395258b2
* fixup dependencies
Change-Id: I4b2fb7a0abb462f8df74c383c67517065cd95b67
* Update var/spack/repos/builtin/packages/py-lazyarray/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* new package: py-batchspawner
Change-Id: I508bad7ba7f1fc32c2f6c0bfccf35d864cf47ced
* fixup
Change-Id: If183933ce40a8d12214ea24acc683cb046fcfbcb
* fix broken version
Change-Id: Ie4dd8d18465877cd8f9cb862112af37d85b1c30f
* fixup license
Change-Id: I51d92a6d229f6a6b56eea6e53c65ed31fe59f6af
* Update var/spack/repos/builtin/packages/py-batchspawner/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Example replacement:
```
'-D(\w+)(:BOOL)?=\{0\}'\.\s*format\s*\(\s*'(ON|YES|true|TRUE)' if '\+(\w+)' in (self\.)?spec else '(OFF|NO|false|FALSE)'\)
```
with
```
self.define_from_variant('\1', '\4')
```
This will cause failures if any variants were misspelled: I have already caught two packages with nonexistent variants.
Spack uses curl to fetch URL resources. For locally-stored resources
it uses curl's file protocol; when using this protocol, curl expects
that the URL encoding conforms to RFC 3986 (which reserves characters
like '?' and '=' for special use).
We were not performing this encoding, and found a resource where
curl was interpreting this in an unfavorable way (succeeding, but
producing an empty file). This commit properly encodes URLs when
using curl's file protocol.
This error did not likely come up before because in most contexts
Spack was either fetching via http or it was using URLs without
offending characters (for example, the sha-based URLs in mirrors
never contain these characters).
* Add versions 1.9.4 and 1.9.4.1 for cbtf-* packages
* Add versions 2.4.2 and 2.4.2.1 for openspeedshop packages
* Remove older versions
* Switch from generic dependency on elf to a dependency on the
elfutils implementation for cbtf-* and openspeedshop packages
* For llvm-openmp-ompt, relax dependency on libelf to elf (cbtf-krell
now depends on elfutils, and llvm-openmp-ompt, so unless this
dependency is relaxed there would be a conflict)
* Update CMake build_type to support Debug, Release, RelWithDebInfo
in cbtf-* and openspeedshop packages
* Update libmonitor patches when building as a dependency of
cbtf-krell
Pass -ef to the cce fortran compiler, fix the build system to use the correct openmp flag for CCE
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
This also changes the checksum for 1.22.1 because I switched the package
to use the proper upstream tarballs to get rid of the autotools
dependencies. Moreover, a few dependencies were missing. netdata also
requires a few directories to be created in its prefix to actually work.
Spack doesn't require users to manually index their repos; it reindexes the indexes automatically when things change. To determine when to do this, it has to `stat()` all package files in each repository to make sure that indexes up to date with packages. We currently index virtual providers, patches by sha256, and tags on packages.
When this was originally implemented, we ran the checker all the time, at startup, but that was slow (see #7587). But we didn't go far enough -- it still consults the checker and does all the stat operations just to see if a package exists (`Repo.exists()`). That might've been a wash in 2018, but as the number of packages has grown, it's gotten slower -- checking 5k packages is expensive and users see this for small operations. It's a win now to make `Repo.exists()` check files directly.
**Fix:**
This PR does a number of things to speed up `spack load`, `spack info`, and other commands:
- [x] Make `Repo.exists()` check files directly again with `os.path.exists()` (this is the big one)
- [x] Refactor `Spec.satisfies()` so that a checking for virtual packages only happens if needed
(avoids some calls to exists())
- [x] Avoid calling `Repo.exists(spec)` in `Repo.get()`. `Repo.get()` will ultimately try to load
a `package.py` file anyway; we can let the failure to load it indicate that the package doesn't
exist, and avoid another call to exists().
- [x] Fix up some comments in spec parsing
- [x] Call `UnknownPackageError` more consistently in `repo.py`
- [x] `analyze` isn't commonly used; move it to long help
(`spack -H` vs `spack -h`). Give it its own section.
- [x] make it clear from `spack -h` that `spack module` can generate
module files
- [x] shorten help for `spack style`
Currently, module configurations are inconsistent because modulefiles are generated with the configs for the active environment, but are shared among all environments (and spack outside any environment).
This PR fixes that by allowing Spack environments (or other spack config scopes) to define additional sets of modules to generate. Each set of modules can enable either lmod or tcl modules, and contains all of the previously available module configuration. The user defines the name of each module set -- the set configured in Spack by default is named "default", and is the one returned by module manipulation commands in the absence of user intervention.
As part of this change, the module roots configuration moved from the `config` section to inside each module configuration.
Additionally, it adds a feature that the modulefiles for an environment can be configured to be relative to an environment view rather than the underlying prefix. This will not be enabled by default, as it should only be enabled within an environment and for non-default views constructed with separate projections per-spec.
TODO:
- [x] code changes to support multiple module sets
- [x] code changes to support modules relative to a view
- [x] Tests for multiple module configurations
- [x] Tests for modules relative to a view
- [x] Backwards compatibility for module roots from config section
- [x] Backwards compatibility for default module set without the name specified
- [x] Tests for backwards compatibility
Simplify logic by just enabling or disabling fsync as user specified
(default to off currently). Also remove the 4.1 version check, since
that version isn't actually supported in here.
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
The implementation for __str__ has been simplified to traverse the spec directly,
and doesn't call anymore the flat_dependencies method. Dead code has been
removed.
For configure (e.g. for hdf5) to pass, this option needs to be pulled out when invoked in ccld mode.
I thought it had fixed the issue but I still saw it after that. After some digging, my guess is that I was able
to get hdf5 to build with ifort instead of ifx. Lot of overlapping changes occurring at the time, as it were.
There are still outstanding issues building hdf5 with ifx, and Intel is looking into what appears to be a
compiler bug, but this manifests during build and is likely a separate issue.
I have verified that the making the edit in 'ccld' mode removes the -loopopt=0 and enables hdf5 to pass
configure. It should be fine to make the edit in 'ld' mode as well, but I have not tested that and didn't
include an -or- condition for it.
Add new release of SEACAS.
Update netcdf-c version to recent release which fixes some issues that have caused problems in past
Use release version of CGNS instead of develop
* Update Nalu-Wind to remove SuperLU from Trilinos requirement. Also simplify Nalu-Wind package.
* Leave boost option in nalu-wind.
* Add git branches into TPL requirements. Update OpenFAST for change to main branch.
Currently, environment views blink out of existence during the view regeneration, and are slowly built back up to their new and improved state. This is not good if other processes attempt to access the view -- they can see it in an inconsistent state.
This PR fixes makes environment view updates atomic. This requires a level of indirection (via symlink, similar to nix or guix) from the view root to the underlying implementation on the filesystem.
Now, an environment view at `/path/to/foo` is a symlink to `/path/to/._foo/<hash>`, where `<hash>` is a hash of the contents of the view. We construct the view in its content-keyed hash directory, create a new symlink to this directory, and atomically replace the symlink with one to the new view.
This PR has a couple of other benefits:
* It future-proofs environment views so that we can implement rollback.
* It ensures that we don't leave users in an inconsistent state if building a new view fails for some reason.
For background:
* there is no atomic operation in posix that allows for a non-empty directory to be replaced.
* There is an atomic `renameat2` in the linux kernel starting in version 3.15, but many filesystems don't support the system call, including NFS3 and NFS4, which makes it a poor implementation choice for an HPC tool, so we use the symlink approach that others tools like nix and guix have used successfully.
* Added the option to use high performance linkers: gold and lld, for
LBANN. Including them as build flags causes unnecessary propagation
to all dependent packages, reducing package reuse.
fixes#22351
The ASP-based solver now accounts for the presence
in the DAG of deprecated versions and tries to minimize
their number at highest priority.
* gobject-introspection: fix for Python 3.9.
* Fixes the too long line formatting issue.
* gobject-introspection: limits the scope of the patch
Co-authored-by: Robert Mijakovic <robert.mijakovic@lxp.lu>
Variants explicitly set in an abstract root spec are considered
as defaults for the package they refer to, and they override
what is in packages.yaml and in package.py. This is relevant
only for multi-valued variants, where a constraint may extend
an already default value.
* Fixes to flex
- Prefer the version that doesn't need all the patches and extra build
tools
- Make dependency on gettext optional under the nls variant (off by
default)
- Drop the dependency on help2man if we don't have to regenerate the man
pages (when no patches are necessary)
* Bring back gettext dep as it is used during autoconf
The code for guessing cpu archtype based on craype modules names got confused,
at least on LLNL RZ prototype systems. In particular a (L) or (D) at the end of a craype-x86-xxx or other
cpu architecture module was geting the logic confused.
With this patch, any white space + remaining characters in the moduel name are removed.
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
There have been a lot of questions and some confusion recently surrounding Spack installation test capabilities so this PR is intended to clean up and refine the documentation for "Checking an installation".
It aims to better distinguish between checks that are performed during an installation (i.e., build-time tests) and those that can be done days and weeks after the software has been installed (i.e., install (or smoke) tests).
* Enhancing package gmsh to more options, new version
* Enhancing package gmsh, url from https
* Enhancing package gmsh, following reviewer 1
* Improving package gmsh from reviewer
* Adding MED dependency
* Removing env variables and unused dependency (netgen/tetgen)
`flag_handler` currently passes all flags via injection. This makes it
impossible to override the default flags provided by autotools (for
instance, `binutils cflags='-O2'` will still build with `-O2 -g`).
Instead, use injection for our workaround flags and pass other flags to
the build system.
When we first merged the ASP-based solver, unit-tests
were run in a Docker container with root permissions
and that was preventing a few tests to succeed.
Since some time though, clingo is tested as a regular
user within Github Actions VMs, so we should start to
run checks again.
* geos: Fix config issues with python bindings using python3 (#23479)
This should fix some config issues when building geos with python
bindings and using python3 --- the geos configuration scripts had
a few python2-isms.
I only tested (lightly; geos built and I can import geos in python3)
on 3.8.1, but I did check that the patch can at least be applied
in 3.5.
I belatedly discovered that geos dropped all the SWIG bindings
in @3.9, so I also added some conflicts on the +python and +ruby
options to note that they are not supported in 3.9.
* geos: adding omitted patch file
In an active concretize environment, support installing one or more
cli specs only if they are already present in the environment. The
`--no-add` option is the default for root specs, but optional for
dependency specs. I.e. if you `spack install <depspec>` in an
environment, the dependency-only spec `depspec` will be added as a
root of the environment before being installed. In addition,
`spack install --no-add <spec>` fails if it does not find an
unambiguous match for `spec`.
Added the checksum for 4.1.2 and 4.2.0
The `parallel` variant did the exact same behavior as the `mpi` variant, but they had different default values than each other. Both variants set the value of `-DCGNS_ENABLE_PARALLEL`, so it was unclear which variant was "winning" and could definitely result in a non-intuitive build. Did a grep of the spack packages and none of them where using the `parallel` variant to control the cgns options. Retained the `mpi` variant as that one is being used by multiple packages.
One issue that remains to be solved is that the default integer size has changed from 32-bit to 64-bit for the 4.2.0 release. This is controlled by the `int64` variant which currently defaults to `OFF`. There should maybe be some thought about changing the default to match the default of the current release, or maybe having a version-specific default... For now, left the behavior as it has been for previous versions.
The patch available in spack does not patch
cleanly for the 4.1.1 and presumably later releases.
See Open MPI commit b8a8096a3f153380f95af8f285f48e926eb18bf1
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
SILO has optional support for compression libraries that require
C++ (hzip and fpzip). This patch exposes those options as variants
to enable configuration of SILO without the C++ libraries for C
applications. hzip and fpzip are enabled by default to preserve
current behavior.
Like compilers targets now try to minimize
mismatches, instead of maximizing matches.
Deduction of mismatches is reworked to be
the opposite of a match, since computing
that is faster.
The ASP-based solver can natively manage cases where more than one root spec is given, and is able to concretize all the roots together (ensuring one spec per package at most).
Modifications:
- [x] When concretising together an environment the ASP-based solver calls directly its `solve` method rather than constructing a temporary fake root package.
* py-keras: new version
* Adds missing dependencies.
* Removes the newline which is against formatting rules.
* py-keras: limits some dependencies to older versions
* py-keras: restricts dependencies
* pykeras: fixes dependency ranges :)
Co-authored-by: Robert Mijakovic <robert.mijakovic@lrz.de>
Co-authored-by: Robert Mijakovic <robert.mijakovic@lxp.lu>
The loading protocol mandates that the the module we are going
to import needs to be already in sys.modules before its code is
executed, so to prevent unbounded recursions and multiple loading.
Loading a module from file exits early if the module is already
in sys.modules
When installing OneAPI packages as root (e.g. in a container), the
installer places cache files in /var/intel/installercache that
interfere with future Spack installs. This ensures that when
running an installation as a root user that this is removed.
* Adding hip support
* Added new blaspp version and rocm support. Fixed error in mesa18 package.
* Correcting variant name.
* Code style fixes
* Change of name of library
* Change "make check" to correctly run from the build directory.
* Upgraded version to fix testing errors
* Fixed testing directory
* Removed unnecessary variant entry (already inherited from CudaPackage)
* Generalization of version matching logic
* Code style
* Corrected version requirement
SCR moved to a component version some time ago, but never had a
release associated with these changes. SCR v2 is a legacy version
that is no longer being developed/supported. In preparation for an
upcoming SCR v3 release, there is now a 3.0rc1 release available to
users.
This adds the 3.0rc1 release to the spack package and deprecates the
older versions.
Additional changes include:
- Enforce using the main branches of the components when installing
scr@develop
- Enforce SCR v3 uses at least the recently released versions of each
of the components
- Use a simple `detect_scheduler()` function in an attempt to be
smarter about setting the default resource manager and not require
users to always manually provide the variant
- Add/update variants that were recently added to AXL and KVTree
components
- Fix cmake arg naming bug of setting `SCR_CONFIG_FILE`
- `SCR_ASYNC_API` is now being handled by a component and is only
needed by the legacy versions.
* Added checksum for recently released 4.8.0
* Added `enable-fsync` variant. The `fsync` flag was added to the configuration as of version 4.1.0 and later. Originally, it defaulted to `on`, but at version 4.3.0 and later, it was changed to default to `off` and a `enable-fsync` configuration flag was added to enable it.
The spack package has the `--enable-fsync` specified with no way to disable for all builds of netcdf-c 4.1.0 and later. This can cause horrendously slow I/O for certain use cases (e.g. 7 seconds with no-fsync versus 2300 seconds with fsync enabled). With the new variant, the default build behavior matches the default of non-spack netCDF.
* Metall: add version 0.2
* Add Metall v0.3
* Update Metall package to v0.4 and v0.5.
* Metall package: add v0.6
* Metall package: add v0.7
* Metall package: add v0.8 and v0.9
* Add Metall package v0.10
* Metall package: set run_environment METALL_ROOT
* Metall package: removed blanks
* Metall package: add v0.11 and v0.12
* Metall package: change required cmake version
* Metall package: support build test
* Metall package: add v0.13
* Metall package: change to use setup_build_environment
gettext uses a test with <libxml2/libxml/someheader.h> to locate a header,
and libxml2 itself includes <libxml/otherheader.h>, so both have to be
in the include path.
* Building binutils with gold implies building ld
* add +ld to llvm to make the old concretizer happy and add +gas to gcc since that's used in the package.py
* Remove sys
* Metall: add version 0.2
* Add Metall v0.3
* Update Metall package to v0.4 and v0.5.
* Metall package: add v0.6
* Metall package: add v0.7
* Metall package: add v0.8 and v0.9
* Add Metall package v0.10
* Metall package: set run_environment METALL_ROOT
* Metall package: removed blanks
* Metall package: add v0.11 and v0.12
* Metall package: change required cmake version
* qt: update versions and URLs
- Add LTS releases of 5.12.10, 5.9.9, 5.6.3
- Mark other minor versions of 5 as deprecated
- Use https
- The URL for older QT versions changed recently to "new_archive"
- Prefer xz instead of gz for >=5.6 because 5.6.3 isn't available as
gz. This invalidates the SHA of 5.7-5.8.
* mxnet: new version 1.8.0
use submodules on master
introduce constraints on cuda versions supported
handle USE_MKLDNN->USE_ONEDNN conversion
* * use define for USE_CUTENSOR
* fix up dependencies for 2.0.0+
libtirpc puts its header files under prefix/include/tirpc, but
spack was returning just prefix/include for location of headers.
This will cause spack to return both prefix/include and
prefix/include/tirpc for headers, so both
include <rpc/xdr.h>
or
include <tirpc/rpc/xdr.h>
should work.
Help dependents find libraries/headers. Like intel-oneapi-mkl, this
package offers several different versions of libraries that conflict.
This PR chooses one of those versions. When
https://github.com/spack/spack/discussions/22749 is resolved, this
package should be updated to choose which libraries to use.
Previously the tau package got the cxx and cc names from
os.path.basename(self.compiler.cxx), however if the path to the compiler
looks like "/usr/bin/g++-10.2.0" then tau's custom build system doesn't
recognize it. What we want instead is something that looks like "g++"
which is exactly what cxx_names[0] gives us. We already did this for
fortran, so I am not sure why we didn't do it here. Not doing this
causes a build failure when tau tries to use a polyfill (vector.h,
iostream.h) that doesn't seem to be packaged with tau.
Additionally, tau needs some help finding mpi include directories when
building with MPI, so we provide them. Unfortunately, we can't just say
that the compilers are mpicc and mpicxx in the previous fix to have
these things found automatically. This is because tau assumes we always
need the polyfill when the compilers are set to these values which again
causes a build failure.
The function we coded in Spack to load Python modules with arbitrary
names from a file seem to have issues with local imports. For
loading hooks though it is unnecessary to use such functions, since
we don't care to bind a custom name to a module nor we have to load
it from an unknown location.
This PR thus modifies spack.hook in the following ways:
- Use __import__ instead of spack.util.imp.load_source (this
addresses #20005)
- Sync module docstring with all the hooks we have
- Avoid using memoization in a module function
- Marked with a leading underscore all the names that are supposed
to stay local
Complete overhaul of the Legion package to better capture a more
up-to-date set of configuration options and variants. This update
adds additional flexibility and features that were requested by
users.
* Add version 21.03.0 and "stable" branch
* Remove all older numeric versions
* Add support for CUDA, Python, PAPI support and more
* Add maintainer
* This no longer uses the Spack `gasnet` package: it defaults to
using an embedded gasnet or can be pointed to an external
* MUMPS: Use GEMMT BLAS extension when possible.
This should improve the performance and is recommanded by the developers.
* MUMPS: Add a new "openmp" variant.
* MUMPS: Add a "blr_mt" variant.
This improves performance when using OpenMP but might not be compatible with all multithreaded BLAS.
Set the path to javah via the JAVAH environment variable. If it is
a version of java that does not have javah it will fall back to `javac
-h`. Without specifying this the build could pick up a javah from the
system.
- add version 3.4.0
- add patch for bam2wig when version 3.4.0
- url format changed again, hopefully stable now
- added missing python dependency when version >3.3.1
- have older version compile with htslib, samtools ,bcftools
- new dependencies for version 3.4.0
- sqlite
- mysql-client
- mysqlpp
- lp-solve
- suite-sparse
- refactored filtering code
- set python interpreter in scripts
This is as much a question as it is a minor fine-tuning of the docs. I've been known to add things to an environment by editing the `spack.yaml` file directly. When I read the previous version of this sentence, I was afraid that `spack add` was actually doing *two* things, modifying the `spack.yaml` and updating something else that defined the roots of the Environment. A bit of experimentation suggests that editing the `spack.yaml` file is sufficient to change the roots.
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
This adds that new version to the package, updates the url, and
updates the hash of v0.0.3 for the new url.
This also updates the KVTree dependency as MPI is required to be
enabled in KVTree for er to work.
rankstr is now also required by er for recently added tests.
PR #22864 added a patch to hpctoolkit to fix an issue with gcc 10.x, and the patch was applied to all revs unconditionally. But this was fixed in hpctoolkit master on Aug 11, 2020, so the patch should only apply to old revs.
Fixes#22951.
Update package with 4.1 sha keys.
Use variant to disable openmp in the build of llvm-amdgpu.
Set CPATH, LIBRARY_PATH so that clang knows to look in the rocm-openmp-extras for headers/libraries.
Disable flang warnings as Spack thinks they are errors.
In ROCm 4.1, the plugin changed names from hsa -> amdgpu.
Update HSA_INCLUDE for 4.1.0.
Clingo has been released on PyPI, so there
are no more concerns on our CI depending
on pypy.test for installing the wheel.
Apparently we have parts of Spack which
are not compatible with kcov > 3.4
UnifyFS has been integrated with updated versions of its mochi-margo
dependency (and mochi-margo's mercury and libfabric dependencies).
This removes support for version 0.9.0
fixes#22786
Trying to get optimization flags for a specific target from
a compiler may trigger warnings. In the context of constructing
facts for the ASP-based solver we don't want to show these
warnings to the user, so here we simply ignore them.
These were deprecated when the custom cuda_arch list was
removed. Also fixed up the Aluminum dependencies for Hydrogen and
DiHydrogen. Turns out that Aluminum v0.6.0 didn't have a correct
version in CMake and thus the interaction with older versions of
Hydrogen and DiHydrogen needed to be corrected.
This isn't a significant issue, but I noticed that the docstring incorrectly references "tty.fail" and I wanted to quickly fix it to reflect the correct command, tty.die. I also wanted to fix the docstrings to not be large clumps, to what @tgamblin suggested after I wrote this - having one line at the top that is a quick summary, and more verbose after that.
* New package: py-pymumps
Python bindings for MUMPS, a parallel sparse direct solver
* py-pymumps: fixing flake issues
* py-pymumps: fix dependency types
Following suggestion of @adamjstewart
* Update var/spack/repos/builtin/packages/py-pymumps/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-pymumps/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-pymumps/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-pymumps/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-pymumps/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-pymumps/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
This has been checked with gcc on ubuntu 16.04, which ships binutils 2.26 by
default, using spack's binutils 2.36. Only the combination +gas and ~ld
seems to trigger this incompatibility with debug symbols (gcc -g -O2
main.c fails with the error in the comment above the conflict)
- Add dependency on eigen package
- Add last version known to work with ROOT 6.16.00. Until recently GenFit lacked
any tagged versions, therefore, we use a commit hash
FFTW:
(1) Condition to ensure Quad precision is not supported in MPI under FFTW base class
AMDFFTW:
(1) Support for debug and quad precision for aocc compiler
(2) Dedicated variant for threads for enabling SMP threads
(3) Restricted simd features to 'sse2', 'avx' and 'avx2'
(4) Removed float simd features
(5) If debug option is enabled, configure option will be appended with --enable-debug option
(6) Condition to ensure amd-fast-planner is supported from 3.0 onwards under amdfftw derived class
(7) New variant amd-fast-planner - This option will reduce the planning time without much tradeoff in the performance. It is supported for single and double precisions.
(8) Removed following flags for amdfftw - '--enable-threads', '--enable-fma' and '--enable-sse'
MDSplus is a set of software tools for data acquisition and storage and
a methodology for management of complex scientific data.
https://www.mdsplus.org
Co-authored-by: Marijn van Vliet <marijn.vanvliet@aalto.fi>
This provides initial support for [spack monitor](https://github.com/spack/spack-monitor), a web application that stores information and analysis about Spack installations. Spack can now contact a monitor server and upload analysis -- even after a build is already done.
Specifically, this adds:
- [x] monitor options for `spack install`
- [x] `spack analyze` command
- [x] hook architecture for analyzers
- [x] separate build logs (in addition to the existing combined log)
- [x] docs for spack analyze
- [x] reworked developer docs, with hook docs
- [x] analyzers for:
- [x] config args
- [x] environment variables
- [x] installed files
- [x] libabigail
There is a lot more information in the docs contained in this PR, so consult those for full details on this feature.
Additional tests will be added in a future PR.
In debug mode, processes taking an exclusive lock write out their node name to
the lock file. We were using `getfqdn()` for this, but it seems to produce
inconsistent results when used from within some github actions containers.
We get this error because getfqdn() seems to return a short name in one place
and a fully qualified name in another:
```
File "/home/runner/work/spack/spack/lib/spack/spack/test/llnl/util/lock.py", line 1211, in p1
assert lock.host == self.host
AssertionError: assert 'fv-az290-764....cloudapp.net' == 'fv-az290-764'
- fv-az290-764.internal.cloudapp.net
+ fv-az290-764
!!!!!!!!!!!!!!!!!!!! Interrupted: stopping after 1 failures !!!!!!!!!!!!!!!!!!!!
== 1 failed, 2547 passed, 7 skipped, 22 xfailed, 2 xpassed in 1238.67 seconds ==
```
This seems to stem from https://bugs.python.org/issue5004.
We don't really need to get a fully qualified hostname for debugging, so use
`gethostname()` because its results are more consistent. This seems to fix the
issue.
Signed-off-by: vsoch <vsoch@users.noreply.github.com>
New version has new dependencies (which are also added here as new
packages):
* perl-mce
* perl-threads
* perl-thread-queue
The new version of genemark-et also has a different URL scheme.
* Add a +gui variant (default off) which adds dependencies on
qt, paraview, and qwt
* Backport upstream patch when installing version 8.4 (this patch
is already applied for versions >= 9.0)
Both binary packages would otherwise require X11 and Mesa libraries to
be installed on the host to run. Make sure they use the Spack-provided
libraries by patching the `rpath` via `patchelf`.
* Clarify stub compiler definition in compilers.yaml
* Update explanation of why stub compiler definition is needed
* Add note about required module definition when using Spack-installed
intel-parallel-studio as intel-compiler
* Add suggestion about updating package config preferences based on
choice of variants when installing intel-parallel-studio to avoid
reinstallation
on multilib distros with lib/lib64 (rather than lib32/lib) the library ends up in a dir lib64/ instead of lib/, breaking the libs property (and the cp2k+spglib build)
We remove system paths from search variables like PATH and
from -L options because they may contain many packages and
could interfere with Spack-built packages. External packages
may be installed to prefixes that are not actually system paths
but are still "merged" in the sense that many other packages are
installed there. To avoid conflicts, this PR places all external
packages at the end of search paths.
See #17270.
```
make[2]: Entering directory `/tmp/vavolkl/spack-stage/spack-stage-qt-5.14.2-63dapppjbq6vqh3le7pazsprijls7cfl/spack-src/qtwebengine/src'
/bin/sh: -c: line 0: syntax error near unexpected token `('
/bin/sh: -c: line 0: `echo Modules will not be built. Python version 2 (2.7.5 or later) is required to build QtWebEngine.'
make[2]: *** [errorbuild] Error 1
```
We set LC_ALL=C to encourage a build process to generate ASCII
output (so our logger daemon can decode it). Most packages
respect this but it appears that intel-oneapi-compilers does
not in some cases (see #22813). This reads the output of the build
process as UTF-8, which still works if the build process respects
LC_ALL=C but also works if the process generates UTF-8 output.
For Python >= 3.7 all files are opened with UTF-8 encoding by
default. Python 2 does not support the encoding argument on
'open', so to support Python 2 the files would have to be
opened in byte mode and explicitly decoded (as a side note,
this would be the only way to handle other encodings without
being informed of them in advance).
* bugfix: fix representation of null in spack_yaml output
Nulls were previously printed differently by `spack config blame config`
and `spack config get config`. Fix this in the `spack_yaml` dumpers.
* bugfix: `spack config blame` should print all lines of config
`spack config blame` was not printing all lines of configuration because
there were no annotations for empty lines in the YAML dump output. Fix
this by removing empty lines.
Fixed previously unspecified python dependency and ensured that spack's
python is what exodus@v2016 uses. Also, in the process, identified many
missing versions
* new package: gatetools
This PR adds the gatetools package and dependencies. The gatetools
package is a set of command line tools for gate. Since it is primarily a
CLI, although python modules can be loaded, it is named gatetools as
opposed to py-gatetools.
* Fix quote characterss to avoid test error
* Found another UTF8 character that was tripping up tests
* Another UTF-8 character to replace
* Remove py-python-box dependency and package file
* Make numpy a variant
- py-setuptools needs to be a run dependendency
This was masked by py-numpy having py-setuptools as a run dependency.
* Add missing build depency on py-pytest-runner
- set constraint for geant4 to version 10.6 as gate does not work with
geant-10.7+
- set GATE_USE_ITK: Although RTK is built under ITK, there are some ITK
macros that need to be set explicitly.
As pointed out in https://github.com/STEllAR-GROUP/hpx/issues/5239,
there is an issues in OTF2 <=2.2 where a variable is not properly
initialized. As currently no release of OTF2 is available fixing this,
the patch should be applied.
* [py-scikit-image] Added py-setuptools back into depends_on. Otherwise it is putting skimage in scikit_image-version-pyX.Y-arch.egg dir under site-packages
* [py-scikit-image] Added latest version
* [py-scikit-image] Added py-numpy version dependency when package version greater than 0.18
* [py-scikit-image] Updates to python dependency
* Fix typo
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
- Use debugoptimized as default build type, just like RelWithDebInfo for cmake
- Do not strip by default, and add a default_library variant which conveniently support both shared and static
- Add a maintainer
- Help libtool to find the correct paths to libraries
- Handle externals from system directories
- Enable eccodes for older versions
* The fltk package can build libraries with opengl support. By default, the configure script looks for opengl headers in the sytem include paths. If 'devel' packages have not been installed on the system it omits the 'ftlk_gl.so' library. This can break packages like 'octave' which expects 'fltk' to have opengl support and looks for the library 'fltk_gl'.
Make opengl support explicit in fltk by adding a dependency on 'gl' and adding a new variant of the same name 'gl' (default On).
With these modifications 'fltk_gl' and 'octave' build successfully on CentOS8.
The default behavior is to always enable opengl.
https://www.fltk.org/doc-1.3/intro.html
* Add patch for latest hwloc@:1 to locate ncurses
This way we don't have to depend on ncurses~termlib, which may run into
issues when another package explicitly depends on ncurses+termlib
* Move termcap to the back, cause it's a system symlink on macos and isn't set by spack
- add new version, 4.09.1
- use github url
- convert to autotools package
- deprecate version 4.07b: This version requires manual download and is
a binary only installation.
- version 4.0.7 was not building
- version 4.0.9 was not setting search correctly due to an extra "return"
in config
- added version 4.1.2-p1
- new version needs py-h5py
- new version does not need utf8 patch
- url format changed
Add a conflict for CUDA and shared libraries in Ascent.
The new concretizer will automatically change the default for
Ascent in that case. Until then, dependencies like WarpX need
to hint the `~shared` wish explicitly.
This initial package recipe uses a custom-built wrapper to drive an internal CMake file. Since nekRS also includes built-in copies of several dependencies such as BLAS and HYPRE, it cannot be linked with other such dependencies. However, to work with the `ceed` metapackage, we cannot add `^blas` conflicts to nekRS.
See https://github.com/spack/spack/pull/22519 for discussion.
By default, clingo doesn't show any optimization criteria (maximized or
minimized sums) if the set they aggregate is empty. Per the clingo
mailing list, we can get around that by adding, e.g.:
```
#minimize{ 0@2 : #true }.
```
for the 2nd criterion. This forces clingo to print out the criterion but
does not affect the optimization.
This PR adds directives as above for all of our optimization criteria, as
well as facts with descriptions of each criterion,like this:
```
opt_criterion(2, "number of non-default variants")
```
We use facts in `concretize.lp` rather than hard-coding these in `asp.py`
so that the names can be maintained in the same place as the other
optimization criteria.
The now-displayed weights and the names are used to display optimization
output like this:
```console
(spackle):solver> spack solve --show opt zlib
==> Best of 0 answers.
==> Optimization Criteria:
Priority Criterion Value
1 version weight 0
2 number of non-default variants (roots) 0
3 multi-valued variants + preferred providers for roots 0
4 number of non-default variants (non-roots) 0
5 number of non-default providers (non-roots) 0
6 count of non-root multi-valued variants 0
7 compiler matches + number of nodes 1
8 version badness 0
9 non-preferred compilers 0
10 target matches 0
11 non-preferred targets 0
zlib@1.2.11%apple-clang@12.0.0+optimize+pic+shared arch=darwin-catalina-skylake
```
Note that this is all hidden behind a `--show opt` option to `spack
solve`. Optimization weights are no longer shown by default, but you can
at least inspect them and more easily understand what is going on.
- [x] always show optimization criteria in `clingo` output
- [x] add `opt_criterion()` facts for all optimizationc criteria
- [x] make display of opt criteria optional in `spack solve`
- [x] rework how optimization criteria are displayed, and add a `--show opt`
optiong to `spack solve`
CachedCMakePackage is a CMakePackage subclass for using CMake initial
cache. This feature of CMake allows packages to increase reproducibility,
especially between spack builds and manual builds. It also allows
packages to sidestep certain parsing bugs in extremely long cmake
commands, and to avoid system limits on the length of the command line.
Co-authored by: Chris White <white238@llnl.gov>
* Add patch for Intel C++ compiler
- On some machines (in particular MacOSX Catalina), the icpc in some way
utilizes the preprocessor of the associated "developer tools" used by
icpc. This leads to, in some cases, a preprocessor claiming support for
__tuple_element_packs, even though icpc (as of version 21.1) can't
actually parse such code. Just use the MPARK_TUPLE_ELEMENT_PACK impl
with __icc until icpc supports it, to avoid issues with developer tools
that are untested.
- The same patch has been PRed against mpark-variant
In the face of two consecutive spaces in the command line, the compiler wrapper would skip all remaining arguments, causing problems building py-scipy with Intel compiler. This PR solves the problem.
* Fixed compiler wrapper in the face of extra spaces between arguments
Co-authored-by: Elizabeth Fischer <elizabeth.fischer@alaska.edu>
Backwards incompatible cleanup to target single-tarball-per-arch builds
going forwards.
* Replace per-distro versions with new per-arch builds, and add
url_for_version to avoid specifying per tarball.
* Customise environment setup to avoid adding lib to LD_LIBRARY_PATH.
* Update homepage and licensing URLs.
* Avoid shell interpretation when running textinstall.sh.
* Added NickRF as maintainer.
Use `conflicts` directive whenever possible.
This allows failing early when conflicting variants are used.
Do not silently ignore `+parmetis` variant when `~metis`.
Instead throw an error during concretization.
Simplify the "Makefile.inc" generation.
This will make easier to add new variants in the future.
* Added version patch for 1.4.0 tag on mpark-variant
Redirected urls to git and github tags.
* Updated to commit hashes
* Update var/spack/repos/builtin/packages/mpark-variant/package.py
Co-authored-by: Axel Huebl <axel.huebl@plasma.ninja>
* Update var/spack/repos/builtin/packages/mpark-variant/package.py
Co-authored-by: Axel Huebl <axel.huebl@plasma.ninja>
* Update var/spack/repos/builtin/packages/mpark-variant/package.py
Co-authored-by: Anthony J Zukaitis <zukaitis@lanl.gov>
Co-authored-by: Axel Huebl <axel.huebl@plasma.ninja>
Original commit message:
This feature of CMake allows packages to increase reproducibility, especially between
Spack- and manual builds. It also allows packages to sidestep certain parsing bugs in
extremely long ``cmake`` commands, and to avoid system limits on the length of the
command line.
Adding:
Co-authored by: Chris White <white238@llnl.gov>
This reverts commit c4f0a3cf6c.
CachedCMakePackage is a specialized class for packages built using CMake initial cache.
This feature of CMake allows packages to increase reproducibility, especially between
Spack- and manual builds. It also allows packages to sidestep certain parsing bugs in
extremely long ``cmake`` commands, and to avoid system limits on the length of the
command line.
Autoconf before 2.70 will erroneously pass ifx's -loopopt argument to the
linker, requiring all packages to use autoconf 2.70 or newer to use ifx.
This is a hotfix enabling ifx to be used in Spack. Instead of bothering
to upgrade autoconf for every package, we'll just strip out the
problematic flag if we're in `ld` mode.
- [x] Add a conditional to the `cc` wrapper to skip `-loopopt` in `ld`
mode. This can probably be generalized in the future to strip more
things (e.g., via an environment variable we can constrol from
Spack) but it's good enough for now.
- [x] Add a test ensuring that `-loopopt` arguments are stripped in link
mode, but not in compile mode.
Since `lazy_lexicographic_ordering` handles `None` comparison for us, we
don't need to adjust the spec comparators to return empty strings or
other type-specific empty types. We can just leverage the None-awareness
of `lazy_lexicographic_ordering`.
- [x] remove "or ''" from `_cmp_iter` in `Spec`
- [x] remove setting of `self.namespace` to `''` in `MockPackage`
We have been using the `@llnl.util.lang.key_ordering` decorator for specs
and most of their components. This leverages the fact that in Python,
tuple comparison is lexicographic. It allows you to implement a
`_cmp_key` method on your class, and have `__eq__`, `__lt__`, etc.
implemented automatically using that key. For example, you might use
tuple keys to implement comparison, e.g.:
```python
class Widget:
# author implements this
def _cmp_key(self):
return (
self.a,
self.b,
(self.c, self.d),
self.e
)
# operators are generated by @key_ordering
def __eq__(self, other):
return self._cmp_key() == other._cmp_key()
def __lt__(self):
return self._cmp_key() < other._cmp_key()
# etc.
```
The issue there for simple comparators is that we have to bulid the
tuples *and* we have to generate all the values in them up front. When
implementing comparisons for large data structures, this can be costly.
This PR replaces `@key_ordering` with a new decorator,
`@lazy_lexicographic_ordering`. Lazy lexicographic comparison maps the
tuple comparison shown above to generator functions. Instead of comparing
based on pre-constructed tuple keys, users of this decorator can compare
using elements from a generator. So, you'd write:
```python
@lazy_lexicographic_ordering
class Widget:
def _cmp_iter(self):
yield a
yield b
def cd_fun():
yield c
yield d
yield cd_fun
yield e
# operators are added by decorator (but are a bit more complex)
There are no tuples that have to be pre-constructed, and the generator
does not have to complete. Instead of tuples, we simply make functions
that lazily yield what would've been in the tuple. If a yielded value is
a `callable`, the comparison functions will call it and recursively
compar it. The comparator just walks the data structure like you'd expect
it to.
The ``@lazy_lexicographic_ordering`` decorator handles the details of
implementing comparison operators, and the ``Widget`` implementor only
has to worry about writing ``_cmp_iter``, and making sure the elements in
it are also comparable.
Using this PR shaves another 1.5 sec off the runtime of `spack buildcache
list`, and it also speeds up Spec comparison by about 30%. The runtime
improvement comes mostly from *not* calling `hash()` `_cmp_iter()`.
* New package py-argh
* Fixed deps
* Changed setuptools type
* Update var/spack/repos/builtin/packages/py-argh/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Make -j flag less exceptional
The -j flag in spack behaves differently from make, ctest, ninja, etc,
because it caps the number of jobs to an arbitrary number 16.
Spack will behave like other tools if `spack install` uses a reasonable
default, and `spack install -j <num>` *overrides* that default.
This will be particularly useful for Spack usage outside of a traditional
HPC context and for HPC centers that encourage users to compile on
login nodes with many cores instead of on compute nodes, which has
become increasingly common as individual nodes have more cores.
This maintains the existing default value of min(num_cpus, 16). However,
as it is right now, Spack does a poor job at determining the number of
cpus on linux, since it doesn't take cgroups into account. This is
particularly problematic when using distributed builds with slurm. This PR
also introduces `spack.util.cpus.cpus_available()` to consolidate
knowledge on determining the number of available cores, and improves
core detection for linux. This should also improve core detection for Docker/
Kubernetes, which also use cgroups.
This commit extends the API of the __call__ method of the
SpackCommand class to permit passing global arguments
like those interposed between the main "spack" command
and the subsequent subcommand.
The functionality is used to fix an issue where running
```spack -e . location -b some_package```
ends up printing the name of the environment instead of
the build directory of the package, because the location arg
parser also stores this value as `arg.env`.
fixes#22294
A combination of the swapping order for global variables and
the fact that most of them are lazily evaluated resulted in
custom install tree not being taken into account if clingo
had to be bootstrapped.
This commit fixes that particular issue, but a broader refactor
may be needed to ensure that similar situations won't affect us
in the future.
* Fixed a bug in the DiHydrogen package where the variant legacy was
changed to distconv and wasn't fully propagated. Cleaned up the
openmp variants on the blas library packages in DiHydrogen and
Elemental. Extended support for Aluminum v1.0 in LBANN, Hydrogen, and
DiHydrogen. Fixed a when clause in the LBANN dependencies.
* Removed the upper range limit for the Aluminum library dependence
* Update var/spack/repos/builtin/packages/dihydrogen/package.py
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Remote buildcache indices need to be stored in a place that does not
require writing to the Spack prefix. Move them from the install_tree to
the misc_cache.
fixes#22565
This change enforces the uniqueness of the version_weight
atom per node(Package) in the DAG. It does so by applying
FTSE and adding an extra layer of indirection with the
possible_version_weight/2 atom.
Before this change it may have happened that for the same
node two different version_weight/2 were in the answer set,
each of which referred to a different spec with the same
version, and their weights would sum up.
This lead to unexpected result like preferring to build a
new version of an external if the external version was
older.
* Make stage use concrete specs from environment
Same as in https://github.com/spack/spack/pull/21642, the idea is that
we want to easily stage a package that fails to build in a complex
environment. Instead of making the user create a spec by hand (basically
transforming all the rules in the environment manifest into a spec,
defying the purpose of the environment...), use the provided spec as a
filter for the already concretized specs. This also speeds up things,
cause we don't have to reconcretize.
This adds MPICC=/path/to/intel-oneapi/mpicc etc to he dependents build stage enabling the use of the compiler wrappers.
Co-authored-by: Stephen Sachs <stesachs@amazon.com>
* clingo: modify recipe for bootstrapping
Modifications:
- clingo builds with shared Python only if ^python+shared
- avoid building the clingo app for bootstrapping
- don't link to libpython when bootstrapping
* Remove option that breaks on linux
* Give more hints for the current Python
* Disable CLINGO_BUILD_PY_SHARED for bootstrapping
* bootstrapping: try to detect the current python from std library
This is much faster than calling external executables
* Fix compatibility with Python 2.6
* Give hints on which compiler and OS to use when bootstrapping
This change hints which compiler to use for bootstrapping clingo
(either GCC or Apple Clang on MacOS). On Cray platforms it also
hints to build for the frontend system, where software is meant
to be installed.
* Use spec_for_current_python to constrain module requirement
* ASP-based solver: avoid adding values to variants when they're set
fixes#22533fixes#21911
Added a rule that prevents any value to slip in a variant when the
variant is set explicitly. This is relevant for multi-valued variants,
in particular for those that have disjoint sets of values.
* Ensure disjoint sets have a clear semantics for external packages
fixes#22547
SingleFileScope was not able to repopulate its cache before this
change. This was affecting the configuration seen by environments
using clingo bootstrapped from sources, since the bootstrapping
operation involved a few cache invalidation for config files.
* py-dask-glm: Push again for testing with git.
* py-dask-glm: Fixed the pointed out OSS dependency setting to type=build.
* py-dask-glm: Set depends_on to type=build in the OSS to be built when building the document.
* py-dask-glm: Fix type of depends_on (py-scikit-learn)
Co-authored-by: miura <miura@fx7-pg01.cm.cluster>
about: Report a bug in the core of Spack (command not working as expected, etc.)
labels: "bug,triage"
---
<!-- Explain, in a clear and concise way, the command you ran and the result you were trying to achieve.
Example: "I ran `spack find` to list all the installed packages and ..." -->
### Steps to reproduce the issue
```console
$ spack <command1> <spec>
$ spack <command2> <spec>
...
```
### Error Message
<!-- If Spack reported an error, provide the error message. If it did not report an error but the output appears incorrect, provide the incorrect output. If there was no error message and no output but the result is incorrect, describe how it does not match what you expect. -->
```console
$ spack --debug --stacktrace <command>
```
### Information on your system
<!-- Please include the output of `spack debug report` -->
<!-- If you have any relevant configuration detail (custom `packages.yaml` or `modules.yaml`, etc.) you can add that here as well. -->
### Additional information
<!-- These boxes can be checked by replacing [ ] with [x] or by clicking them after submitting the issue. -->
- [ ] I have run `spack debug report` and reported the version of Spack/Python/Platform
- [ ] I have searched the issues of this repo and believe this is not a duplicate
- [ ] I have run the failing commands in debug mode and reported the output
<!-- We encourage you to try, as much as possible, to reduce your problem to the minimal example that still reproduces the issue. That would help us a lot in fixing it quickly and effectively!
If you want to ask a question about the tool (how to use it, what it can currently do, etc.), try the `#general` channel on our Slack first. We have a welcoming community and chances are you'll get your reply faster and without opening an issue.
Other than that, thanks for taking the time to contribute to Spack! -->
description:Report a bug in the core of Spack (command not working as expected, etc.)
labels:[bug, triage]
body:
- type:textarea
id:reproduce
attributes:
label:Steps to reproduce
description:|
Explain, in a clear and concise way, the command you ran and the result you were trying to achieve.
Example: "I ran `spack find` to list all the installed packages and ..."
placeholder:|
```console
$ spack <command1> <spec>
$ spack <command2> <spec>
...
```
validations:
required:true
- type:textarea
id:error
attributes:
label:Error message
description:|
If Spack reported an error, provide the error message. If it did not report an error but the output appears incorrect, provide the incorrect output. If there was no error message and no output but the result is incorrect, describe how it does not match what you expect.
placeholder:|
```console
$ spack --debug --stacktrace <command>
```
- type:textarea
id:information
attributes:
label:Information on your system
description:Please include the output of `spack debug report`
validations:
required:true
- type:markdown
attributes:
value:|
If you have any relevant configuration detail (custom `packages.yaml` or `modules.yaml`, etc.) you can add that here as well.
- type:checkboxes
id:checks
attributes:
label:General information
options:
- label:I have run `spack debug report` and reported the version of Spack/Python/Platform
required:true
- label:I have searched the issues of this repo and believe this is not a duplicate
required:true
- label:I have run the failing commands in debug mode and reported the output
required:true
- type:markdown
attributes:
value:|
We encourage you to try, as much as possible, to reduce your problem to the minimal example that still reproduces the issue. That would help us a lot in fixing it quickly and effectively!
If you want to ask a question about the tool (how to use it, what it can currently do, etc.), try the `#general` channel on [our Slack](https://slack.spack.io/) first. We have a welcoming community and chances are you'll get your reply faster and without opening an issue.
Other than that, thanks for taking the time to contribute to Spack!
about: Some package in Spack didn't build correctly
title: "Installation issue: "
labels: "build-error"
---
<!-- Thanks for taking the time to report this build failure. To proceed with the report please:
1. Title the issue "Installation issue: <name-of-the-package>".
2. Provide the information required below.
We encourage you to try, as much as possible, to reduce your problem to the minimal example that still reproduces the issue. That would help us a lot in fixing it quickly and effectively! -->
### Steps to reproduce the issue
<!-- Fill in the exact spec you are trying to build and the relevant part of the error message -->
```console
$ spack install <spec>
...
```
### Information on your system
<!-- Please include the output of `spack debug report` -->
<!-- If you have any relevant configuration detail (custom `packages.yaml` or `modules.yaml`, etc.) you can add that here as well. -->
### Additional information
<!-- Please upload the following files. They should be present in the stage directory of the failing build. Also upload any config.log or similar file if one exists. -->
* [spack-build-out.txt]()
* [spack-build-env.txt]()
<!-- Some packages have maintainers who have volunteered to debug build failures. Run `spack maintainers <name-of-the-package>` and @mention them here if they exist. -->
### General information
<!-- These boxes can be checked by replacing [ ] with [x] or by clicking them after submitting the issue. -->
- [ ] I have run `spack debug report` and reported the version of Spack/Python/Platform
- [ ] I have run `spack maintainers <name-of-the-package>` and @mentioned any maintainers
- [ ] I have uploaded the build log and environment files
- [ ] I have searched the issues of this repo and believe this is not a duplicate
description:Some package in Spack didn't build correctly
title:"Installation issue: "
labels:[build-error]
body:
- type:markdown
attributes:
value:|
Thanks for taking the time to report this build failure. To proceed with the report please:
1. Title the issue `Installation issue: <name-of-the-package>`.
2. Provide the information required below.
We encourage you to try, as much as possible, to reduce your problem to the minimal example that still reproduces the issue. That would help us a lot in fixing it quickly and effectively!
- type:textarea
id:reproduce
attributes:
label:Steps to reproduce the issue
description:|
Fill in the console output from the exact spec you are trying to build.
value:|
```console
$ spack spec -I <spec>
...
```
- type:textarea
id:error
attributes:
label:Error message
description:|
Please post the error message from spack inside the `<details>` tag below:
value:|
<details><summary>Error message</summary><pre>
...
</pre></details>
validations:
required:true
- type:textarea
id:information
attributes:
label:Information on your system
description:Please include the output of `spack debug report`.
validations:
required:true
- type:markdown
attributes:
value:|
If you have any relevant configuration detail (custom `packages.yaml` or `modules.yaml`, etc.) you can add that here as well.
- type:textarea
id:additional_information
attributes:
label:Additional information
description:|
Please upload the following files:
* **`spack-build-out.txt`**
* **`spack-build-env.txt`**
They should be present in the stage directory of the failing build. Also upload any `config.log` or similar file if one exists.
- type:markdown
attributes:
value:|
Some packages have maintainers who have volunteered to debug build failures. Run `spack maintainers <name-of-the-package>` and **@mention** them here if they exist.
- type:checkboxes
id:checks
attributes:
label:General information
options:
- label:I have run `spack debug report` and reported the version of Spack/Python/Platform
required:true
- label:I have run `spack maintainers <name-of-the-package>` and **@mentioned** any maintainers
required:true
- label:I have uploaded the build log and environment files
required:true
- label:I have searched the issues of this repo and believe this is not a duplicate
about: Suggest adding a feature that is not yet in Spack
labels: feature
---
<!--*Please add a concise summary of your suggestion here.*-->
### Rationale
<!--*Is your feature request related to a problem? Please describe it!*-->
### Description
<!--*Describe the solution you'd like and the alternatives you have considered.*-->
### Additional information
<!--*Add any other context about the feature request here.*-->
### General information
- [ ] I have run `spack --version` and reported the version of Spack
- [ ] I have searched the issues of this repo and believe this is not a duplicate
<!--If you want to ask a question about the tool (how to use it, what it can currently do, etc.), try the `#general` channel on our Slack first. We have a welcoming community and chances are you'll get your reply faster and without opening an issue.
Other than that, thanks for taking the time to contribute to Spack!
description:Suggest adding a feature that is not yet in Spack
labels:[feature]
body:
- type:textarea
id:summary
attributes:
label:Summary
description:Please add a concise summary of your suggestion here.
validations:
required:true
- type:textarea
id:rationale
attributes:
label:Rationale
description:Is your feature request related to a problem? Please describe it!
- type:textarea
id:description
attributes:
label:Description
description:Describe the solution you'd like and the alternatives you have considered.
- type:textarea
id:additional_information
attributes:
label:Additional information
description:Add any other context about the feature request here.
- type:checkboxes
id:checks
attributes:
label:General information
options:
- label:I have run `spack --version` and reported the version of Spack
required:true
- label:I have searched the issues of this repo and believe this is not a duplicate
required:true
- type:markdown
attributes:
value:|
If you want to ask a question about the tool (how to use it, what it can currently do, etc.), try the `#general` channel on [our Slack](https://slack.spack.io/) first. We have a welcoming community and chances are you'll get your reply faster and without opening an issue.
Other than that, thanks for taking the time to contribute to Spack!
description:Some package in Spack had stand-alone tests that didn't pass
title:"Testing issue: "
labels:[test-error]
body:
- type:textarea
id:reproduce
attributes:
label:Steps to reproduce the failure(s) or link(s) to test output(s)
description:|
Fill in the test output from the exact spec that is having stand-alone test failures. Links to test outputs (e.g., CDash) can also be provided.
value:|
```console
$ spack spec -I <spec>
...
```
- type:textarea
id:error
attributes:
label:Error message
description:|
Please post the error message from spack inside the `<details>` tag below:
value:|
<details><summary>Error message</summary><pre>
...
</pre></details>
validations:
required:true
- type:textarea
id:information
attributes:
label:Information on your system or the test runner
description:Please include the output of `spack debug report` for your system.
validations:
required:true
- type:markdown
attributes:
value:|
If you have any relevant configuration detail (custom `packages.yaml` or `modules.yaml`, etc.) you can add that here as well.
- type:textarea
id:additional_information
attributes:
label:Additional information
description:|
Please upload test logs or any additional information about the problem.
- type:markdown
attributes:
value:|
Some packages have maintainers who have volunteered to debug build failures. Run `spack maintainers <name-of-the-package>` and **@mention** them here if they exist.
- type:checkboxes
id:checks
attributes:
label:General information
options:
- label:I have reported the version of Spack/Python/Platform/Runner
required:true
- label:I have run `spack maintainers <name-of-the-package>` and **@mentioned** any maintainers
required:true
- label:I have uploaded any available logs
required:true
- label:I have searched the issues of this repo and believe this is not a duplicate
@@ -909,6 +1097,8 @@ could depend on ``mpich@1.2:`` if it can only build with version
Below are more details about the specifiers that you can add to specs.
.._version-specifier:
^^^^^^^^^^^^^^^^^
Version specifier
^^^^^^^^^^^^^^^^^
@@ -924,6 +1114,37 @@ set of arbitrary versions, such as ``@1.0,1.5,1.7`` (``1.0``, ``1.5``,
or ``1.7``). When you supply such a specifier to ``spack install``,
it constrains the set of versions that Spack will install.
For packages with a ``git`` attribute, ``git`` references
may be specified instead of a numerical version i.e. branches, tags
and commits. Spack will stage and build based off the ``git``
reference provided. Acceptable syntaxes for this are:
..code-block::sh
# branches and tags
foo@git.develop # use the develop branch
foo@git.0.19 # use the 0.19 tag
# commit hashes
foo@abcdef1234abcdef1234abcdef1234abcdef1234 # 40 character hashes are automatically treated as git commits
foo@git.abcdef1234abcdef1234abcdef1234abcdef1234
Spack versions from git reference either have an associated version supplied by the user,
or infer a relationship to known versions from the structure of the git repository. If an
associated version is supplied by the user, Spack treats the git version as equivalent to that
version for all version comparisons in the package logic (e.g. ``depends_on('foo', when='@1.5')``).
The associated version can be assigned with ``[git ref]=[version]`` syntax, with the caveat that the specified version is known to Spack from either the package definition, or in the configuration preferences (i.e. ``packages.yaml``).
..code-block::sh
foo@git.my_ref=3.2 # use the my_ref tag or branch, but treat it as version 3.2 for version comparisons
foo@git.abcdef1234abcdef1234abcdef1234abcdef1234=develop # use the given commit, but treat it as develop for version comparisons
If an associated version is not supplied then the tags in the git repo are used to determine
the most recent previous version known to Spack. Details about how versions are compared
and how Spack determines if one version is less than another are discussed in the developer guide.
If the version spec is not provided, then Spack will choose one
according to policies set for the particular spack installation. If
the spec is ambiguous, i.e. it could match multiple versions, Spack
@@ -963,7 +1184,7 @@ Variants are named options associated with a particular package. They are
optional, as each package must provide default values for each variant it
makes available. Variants can be specified using
a flexible parameter syntax ``name=<value>``. For example,
``spack install libelf debug=True`` will install libelf built with debug
``spack install mercury debug=True`` will install mercury built with debug
flags. The names of particular variants available for a package depend on
what was provided by the package author. ``spack info <package>`` will
provide information on what build variants are available.
@@ -971,11 +1192,11 @@ provide information on what build variants are available.
For compatibility with earlier versions, variants which happen to be
boolean in nature can be specified by a syntax that represents turning
options on and off. For example, in the previous spec we could have
supplied ``libelf +debug`` with the same effect of enabling the debug
supplied ``mercury +debug`` with the same effect of enabling the debug
compile time option for the libelf package.
Depending on the package a variant may have any default value. For
``libelf`` here, ``debug`` is ``False`` by default, and we turned it on
``mercury`` here, ``debug`` is ``False`` by default, and we turned it on
with ``debug=True`` or ``+debug``. If a variant is ``True`` by default
you can turn it off by either adding ``-name`` or ``~name`` to the spec.
@@ -1009,6 +1230,23 @@ variants using the backwards compatibility syntax and uses only ``~``
for disabled boolean variants. The ``-`` and spaces on the command
line are provided for convenience and legibility.
Spack allows variants to propagate their value to the package's
dependency by using ``++``, ``--``, and ``~~`` for boolean variants.
For example, for a ``debug`` variant:
..code-block::sh
mpileaks ++debug # enabled debug will be propagated to dependencies
mpileaks +debug # only mpileaks will have debug enabled
To propagate the value of non-boolean variants Spack uses ``name==value``.
For example, for the ``stackstart`` variant:
..code-block::sh
mpileaks stackstart=4# variant will be propagated to dependencies
mpileaks stackstart==4# only mpileaks will have this variant value
^^^^^^^^^^^^^^
Compiler Flags
^^^^^^^^^^^^^^
@@ -1016,10 +1254,15 @@ Compiler Flags
Compiler flags are specified using the same syntax as non-boolean variants,
but fulfill a different purpose. While the function of a variant is set by
the package, compiler flags are used by the compiler wrappers to inject
flags into the compile line of the build. Additionally, compiler flags are
inherited by dependencies. ``spack install libdwarf cppflags="-g"`` will
install both libdwarf and libelf with the ``-g``flag injected into their
compile line.
flags into the compile line of the build. Additionally, compiler flags can
be inherited by dependencies by using ``==``.
``spack install libdwarf cppflags=="-g"``will install both libdwarf and
libelf with the ``-g`` flag injected into their compile line.
..note::
versions of spack prior to 0.19.0 will propagate compiler flags using
the ``=`` syntax.
Notice that the value of the compiler flags must be quoted if it
contains any spaces. Any of ``cppflags=-O3``, ``cppflags="-O3"``,
@@ -1099,7 +1342,7 @@ Normally users don't have to bother specifying the architecture if they
are installing software for their current host, as in that case the
values will be detected automatically. If you need fine-grained control
over which packages use which targets (or over *all* packages' default
target), see :ref:`concretization-preferences`.
target), see :ref:`package-preferences`.
..admonition:: Cray machines
@@ -1221,7 +1464,7 @@ built.
You can see what virtual packages a particular package provides by
getting info on it:
..command-output:: spack info mpich
..command-output:: spack info --virtuals mpich
Spack is unique in that its virtual packages can be versioned, just
like regular packages. A particular version of a package may provide
@@ -1513,6 +1756,7 @@ and it will be added to the ``PYTHONPATH`` in your current shell:
Now ``import numpy`` will succeed for as long as you keep your current
session open.
The loaded packages can be checked using ``spack find --loaded``
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Loading Extensions via Modules
@@ -1538,8 +1782,8 @@ Activating Extensions in a View
Another way to use extensions is to create a view, which merges the
python installation along with the extensions into a single prefix.
See :ref:`filesystem-views` for a more in-depth description of views and
:ref:`cmd-spack-view` for usage of the ``spack view`` command.
See :ref:`configuring_environment_views` for a more in-depth description
of views.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Activating Extensions Globally
@@ -1724,6 +1968,39 @@ This issue typically manifests with the error below:
A nicer error message is TBD in future versions of Spack.
---------------
Troubleshooting
---------------
The ``spack audit`` command:
..command-output:: spack audit -h
can be used to detect a number of configuration issues. This command detects
configuration settings which might not be strictly wrong but are not likely
to be useful outside of special cases.
It can also be used to detect dependency issues with packages - for example
cases where a package constrains a dependency with a variant that doesn't
exist (in this case Spack could report the problem ahead of time but
automatically performing the check would slow down most runs of Spack).
A detailed list of the checks currently implemented for each subcommand can be
printed with:
..command-output:: spack -v audit list
Depending on the use case, users might run the appropriate subcommands to obtain
diagnostics. Issues, if found, are reported to stdout:
..code-block::console
% spack audit packages lammps
PKG-DIRECTIVES: 1 issue found
1. lammps: wrong variant in "conflicts" directive
the variant 'adios' does not exist
in /home/spack/spack/var/spack/repos/builtin/packages/lammps/package.py
==> Adding "clingo-bootstrap@spack+python %apple-clang target=x86_64" and dependencies to the mirror at /opt/bootstrap/local-mirror
==> Adding "gnupg@2.3: %apple-clang target=x86_64" and dependencies to the mirror at /opt/bootstrap/local-mirror
==> Adding "patchelf@0.13.1:0.13.99 %apple-clang target=x86_64" and dependencies to the mirror at /opt/bootstrap/local-mirror
==> Adding binary packages from "https://github.com/alalazo/spack-bootstrap-mirrors/releases/download/v0.1-rc.2/bootstrap-buildcache.tar.gz" to the mirror at /opt/bootstrap/local-mirror
To register the mirror on the platform where it's supposed to be used run the following command(s):
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
