Update changelog for v0.14.3

Spack was attempting to calculate abspath on the located config.guess
path even when it was not found (None); this commit skips the abspath
calculation when config.guess is not found.

.codecov.yml

@@ -5,7 +5,7 @@ coverage:
   status:
     project:
       default:
-        threshold: 0.2%
+        threshold: 0.3%
 
 ignore:
   - lib/spack/spack/test/.*

.coveragerc

@@ -4,9 +4,7 @@
 parallel = True
 concurrency = multiprocessing
 branch = True
-source =
-     bin
-     lib
+source = lib
 omit =
      lib/spack/spack/test/*
      lib/spack/docs/*

.flake8_packages

@@ -9,7 +9,7 @@
 #
 # Note that we also add *per-line* exemptions for certain patterns in the
 # `spack flake8` command.  This is where F403 for `from spack import *`
-# is added (because we *only* allow that wildcard).
+# is added (beause we *only* allow that wildcard).
 #
 # See .flake8 for regular exceptions.
 #

.github/ISSUE_TEMPLATE/bug_report.md

@@ -1,11 +1,14 @@
 ---
-name: "\U0001F41E Bug report"
-about: Report a bug in the core of Spack (command not working as expected, etc.)
-labels: "bug,triage"
+name: Bug report 
+about: Report a bug in the core of Spack (command not working as expected, etc.) 
+labels: bug
 ---
 
-<!-- Explain, in a clear and concise way, the command you ran and the result you were trying to achieve.
-Example: "I ran `spack find` to list all the installed packages and ..." -->
+
+*Explain, in a clear and concise way, the command you ran and the result you were trying to achieve.
+Example: "I ran Spack find to list all the installed packages and..."*
+
+
 
 ### Steps to reproduce the issue
 
@@ -17,26 +20,30 @@ $ spack <command2> <spec>
 
 ### Error Message
 
-<!-- If Spack reported an error, provide the error message. If it did not report an error but the output appears incorrect, provide the incorrect output. If there was no error message and no output but the result is incorrect, describe how it does not match what you expect. -->
+If Spack reported an error, provide the error message. If it did not report an error
+but the output appears incorrect, provide the incorrect output. If there was no error
+message and no output but the result is incorrect, describe how it does not match
+what you expect. To provide more information you might re-run the commands with 
+the additional -d/--stacktrace flags:
 ```console
-$ spack --debug --stacktrace <command>
+$ spack -d --stacktrace <command1> <spec>
+$ spack -d --stacktrace <command2> <spec>
+...
 ```
+that activate the full debug output. 
+
 
 ### Information on your system
 
-<!-- Please include the output of `spack debug report` -->
+This includes:
 
-<!-- If you have any relevant configuration detail (custom `packages.yaml` or `modules.yaml`, etc.) you can add that here as well. -->
+ 1. which platform you are using
+ 2. any relevant configuration detail (custom `packages.yaml` or `modules.yaml`, etc.)
 
-### Additional information
+-----
 
-<!-- These boxes can be checked by replacing [ ] with [x] or by clicking them after submitting the issue. -->
-- [ ] I have run `spack debug report` and reported the version of Spack/Python/Platform
-- [ ] I have searched the issues of this repo and believe this is not a duplicate
-- [ ] I have run the failing commands in debug mode and reported the output
-
-<!-- We encourage you to try, as much as possible, to reduce your problem to the minimal example that still reproduces the issue. That would help us a lot in fixing it quickly and effectively!
+We encourage you to try, as much as possible, to reduce your problem to the minimal example that still reproduces the issue. That would help us a lot in fixing it quickly and effectively!
 
 If you want to ask a question about the tool (how to use it, what it can currently do, etc.), try the `#general` channel on our Slack first. We have a welcoming community and chances are you'll get your reply faster and without opening an issue.
 
-Other than that, thanks for taking the time to contribute to Spack! -->
+Other than that, thanks for taking the time to contribute to Spack!

.github/ISSUE_TEMPLATE/build_error.md

@@ -1,43 +1,78 @@
 ---
-name: "\U0001F4A5 Build error"
-about: Some package in Spack didn't build correctly
-title: "Installation issue: "
+name: Build error 
+about: Some package in Spack didn't build correctly  
 labels: "build-error"
 ---
 
-<!-- Thanks for taking the time to report this build failure. To proceed with the report please:
-
+*Thanks for taking the time to report this build failure. To proceed with the
+report please:*
 1. Title the issue "Installation issue: <name-of-the-package>".
 2. Provide the information required below.
+3. Remove the template instructions before posting the issue.
 
-We encourage you to try, as much as possible, to reduce your problem to the minimal example that still reproduces the issue. That would help us a lot in fixing it quickly and effectively! -->
+We encourage you to try, as much as possible, to reduce your problem to the minimal example that still reproduces the issue. That would help us a lot in fixing it quickly and effectively!
+
+
+---
 
 ### Steps to reproduce the issue
 
-<!-- Fill in the exact spec you are trying to build and the relevant part of the error message -->
 ```console
-$ spack install <spec>
-...
+$ spack install <spec> # Fill in the exact spec you are using
+... # and the relevant part of the error message
 ```
 
-### Information on your system
+### Platform and user environment
 
-<!-- Please include the output of `spack debug report` -->
+Please report your OS here:
+```commandline
+$ uname -a 
+Linux nuvolari 4.15.0-29-generic #31-Ubuntu SMP Tue Jul 17 15:39:52 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
+$ lsb_release -d
+Description:	Ubuntu 18.04.1 LTS
+``` 
+and, if relevant, post or attach:
 
-<!-- If you have any relevant configuration detail (custom `packages.yaml` or `modules.yaml`, etc.) you can add that here as well. -->
+- `packages.yaml`
+- `compilers.yaml`
+
+to the issue
 
 ### Additional information
 
-<!-- Please upload the following files. They should be present in the stage directory of the failing build. Also upload any config.log or similar file if one exists. -->
-* [spack-build-out.txt]()
-* [spack-build-env.txt]()
+Sometimes the issue benefits from additional details. In these cases there are
+a few things we can suggest doing. First of all, you can post the full output of:
+```console
+$ spack spec --install-status <spec>
+...
+```
+to show people whether Spack installed a faulty software or if it was not able to
+build it at all. 
 
-<!-- Some packages have maintainers who have volunteered to debug build failures. Run `spack maintainers <name-of-the-package>` and @mention them here if they exist. -->
+If your build didn't make it past the configure stage, Spack as also commands to parse 
+logs and report error and warning messages:
+```console
+$ spack log-parse --show=errors,warnings <file-to-parse>
+```
+You might want to run this command on the `config.log` or any other similar file
+found in the stage directory: 
+```console
+$ spack location -s <spec>
+```
+In case in `config.log` there are other settings that you think might be the cause 
+of the build failure, you can consider attaching the file to this issue.
 
-### General information
+Rebuilding the package with the following options:
+```console
+$ spack -d install -j 1 <spec>
+...
+```
+will provide additional debug information. After the failure you will find two files in the current directory:
 
-<!-- These boxes can be checked by replacing [ ] with [x] or by clicking them after submitting the issue. -->
-- [ ] I have run `spack debug report` and reported the version of Spack/Python/Platform
-- [ ] I have run `spack maintainers <name-of-the-package>` and @mentioned any maintainers
-- [ ] I have uploaded the build log and environment files
-- [ ] I have searched the issues of this repo and believe this is not a duplicate
+1. `spack-cc-<spec>.in`, which contains details on the command given in input 
+    to Spack's compiler wrapper  
+1. `spack-cc-<spec>.out`, which contains the command used to compile / link the 
+    failed object after Spack's compiler wrapper did its processing 
+
+You can post or attach those files to provide maintainers with more information on what
+is causing the failure.

.github/ISSUE_TEMPLATE/feature_request.md

@@ -1,33 +1,28 @@
 ---
-name: "\U0001F38A Feature request" 
+name: Feature request 
 about: Suggest adding a feature that is not yet in Spack  
 labels: feature
 
 ---
 
-<!--*Please add a concise summary of your suggestion here.*-->
+*Please add a concise summary of your suggestion here.*
 
 ### Rationale
 
-<!--*Is your feature request related to a problem? Please describe it!*-->
+*Is your feature request related to a problem? Please describe it!*
 
 ### Description
 
-<!--*Describe the solution you'd like and the alternatives you have considered.*-->
+*Describe the solution you'd like and the alternatives you have considered.*
 
 
 ### Additional information
-<!--*Add any other context about the feature request here.*-->
+*Add any other context about the feature request here.*
 
 
-### General information
-
-- [ ] I have run `spack --version` and reported the version of Spack
-- [ ] I have searched the issues of this repo and believe this is not a duplicate
+-----
 
 
+If you want to ask a question about the tool (how to use it, what it can currently do, etc.), try the `#general` channel on our Slack first. We have a welcoming community and chances are you'll get your reply faster and without opening an issue.
 
-<!--If you want to ask a question about the tool (how to use it, what it can currently do, etc.), try the `#general` channel on our Slack first. We have a welcoming community and chances are you'll get your reply faster and without opening an issue.
-
-Other than that, thanks for taking the time to contribute to Spack!
--->
+Other than that, thanks for taking the time to contribute to Spack!

.github/workflows/install_spack.sh

@@ -1,20 +0,0 @@
-#!/usr/bin/env sh
-. share/spack/setup-env.sh
-echo -e "config:\n  build_jobs: 2" > etc/spack/config.yaml
-spack config add "packages:all:target:[x86_64]"
-# TODO: remove this explicit setting once apple-clang detection is fixed
-cat <<EOF > etc/spack/compilers.yaml
-compilers:
-- compiler:
-    spec: apple-clang@11.0.3
-    paths:
-      cc: /usr/bin/clang
-      cxx: /usr/bin/clang++
-      f77: /usr/local/bin/gfortran-9
-      fc: /usr/local/bin/gfortran-9
-    modules: []
-    operating_system: catalina
-    target: x86_64
-EOF
-spack compiler info apple-clang
-spack debug report

.github/workflows/linux_build_tests.yaml

@@ -3,12 +3,12 @@ name: linux builds
 on:
   push:
     branches:
+    - master
     - develop
-    - releases/**
   pull_request:
     branches:
+    - master
     - develop
-    - releases/**
     paths-ignore:
       # Don't run if we only modified packages in the built-in repository
       - 'var/spack/repos/builtin/**'
@@ -18,41 +18,33 @@ on:
       - '!var/spack/repos/builtin/packages/py-setuptools/**'
       - '!var/spack/repos/builtin/packages/openjpeg/**'
       - '!var/spack/repos/builtin/packages/r-rcpp/**'
-      - '!var/spack/repos/builtin/packages/ruby-rake/**'
-      # Don't run if we only modified documentation
-      - 'lib/spack/docs/**'
 
 jobs:
   build:
+
     runs-on: ubuntu-latest
     strategy:
+      max-parallel: 4
       matrix:
-        package:
-        - lz4  # MakefilePackage
-        - mpich~fortran  # AutotoolsPackage
-        - tut  # WafPackage
-        - py-setuptools  # PythonPackage
-        - openjpeg  # CMakePackage
-        - r-rcpp  # RPackage
-        - ruby-rake  # RubyPackage
+        package: [lz4, mpich, tut, py-setuptools, openjpeg, r-rcpp]
     steps:
-    - uses: actions/checkout@v2
-    - uses: actions/cache@v2
+    - uses: actions/checkout@v1
+    - name: Cache ccache's store
+      uses: actions/cache@v1
       with:
         path: ~/.ccache
         key: ccache-build-${{ matrix.package }}
         restore-keys: |
           ccache-build-${{ matrix.package }}
-    - uses: actions/setup-python@v2
+    - name: Setup Python
+      uses: actions/setup-python@v1
       with:
-        python-version: 3.9
+        python-version: 3.8
     - name: Install System Packages
       run: |
-        sudo apt-get update
-        sudo apt-get -yqq install ccache gfortran perl perl-base r-base r-base-core r-base-dev ruby findutils openssl libssl-dev libpciaccess-dev
+        sudo apt-get -yqq install ccache gfortran perl perl-base r-base r-base-core r-base-dev findutils openssl libssl-dev libpciaccess-dev
         R --version
         perl --version
-        ruby --version
     - name: Copy Configuration
       run: |
         ccache -M 300M && ccache -z

.github/workflows/linux_unit_tests.yaml

@@ -1,150 +0,0 @@
-name: linux tests
-
-on:
-  push:
-    branches:
-      - develop
-      - releases/**
-  pull_request:
-    branches:
-      - develop
-      - releases/**
-jobs:
-  unittests:
-    runs-on: ubuntu-latest
-    strategy:
-      matrix:
-        python-version: [2.7, 3.5, 3.6, 3.7, 3.8, 3.9]
-        concretizer: ['original', 'clingo']
-
-    steps:
-    - uses: actions/checkout@v2
-      with:
-        fetch-depth: 0
-    - uses: actions/setup-python@v2
-      with:
-        python-version: ${{ matrix.python-version }}
-    - name: Install System packages
-      run: |
-          sudo apt-get -y update
-          # Needed for unit tests
-          sudo apt-get install -y coreutils gfortran graphviz gnupg2 mercurial
-          sudo apt-get install -y ninja-build patchelf
-          # Needed for kcov
-          sudo apt-get -y install cmake binutils-dev libcurl4-openssl-dev
-          sudo apt-get -y install zlib1g-dev libdw-dev libiberty-dev
-    - name: Install Python packages
-      run: |
-          pip install --upgrade pip six setuptools codecov coverage
-    - name: Setup git configuration
-      run: |
-          # Need this for the git tests to succeed.
-          git --version
-          . .github/workflows/setup_git.sh
-    - name: Install kcov for bash script coverage
-      env:
-          KCOV_VERSION: 34
-      run: |
-          KCOV_ROOT=$(mktemp -d)
-          wget --output-document=${KCOV_ROOT}/${KCOV_VERSION}.tar.gz https://github.com/SimonKagstrom/kcov/archive/v${KCOV_VERSION}.tar.gz
-          tar -C ${KCOV_ROOT} -xzvf ${KCOV_ROOT}/${KCOV_VERSION}.tar.gz
-          mkdir -p ${KCOV_ROOT}/build
-          cd ${KCOV_ROOT}/build && cmake -Wno-dev ${KCOV_ROOT}/kcov-${KCOV_VERSION} && cd -
-          make -C ${KCOV_ROOT}/build && sudo  make -C ${KCOV_ROOT}/build install
-    - name: Bootstrap clingo from sources
-      if: ${{ matrix.concretizer == 'clingo' }}
-      run: |
-          . share/spack/setup-env.sh
-          spack external find --not-buildable cmake bison
-          spack -v solve zlib
-    - name: Run unit tests
-      env:
-          COVERAGE: true
-          SPACK_TEST_SOLVER: ${{ matrix.concretizer }}
-      run: |
-          share/spack/qa/run-unit-tests
-          coverage combine
-          coverage xml
-    - uses: codecov/codecov-action@v1
-      with:
-        flags: unittests,linux,${{ matrix.concretizer }}
-  shell:
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@v2
-      with:
-        fetch-depth: 0
-    - uses: actions/setup-python@v2
-      with:
-        python-version: 3.9
-    - name: Install System packages
-      run: |
-          sudo apt-get -y update
-          # Needed for shell tests
-          sudo apt-get install -y coreutils csh zsh tcsh fish dash bash
-          # Needed for kcov
-          sudo apt-get -y install cmake binutils-dev libcurl4-openssl-dev
-          sudo apt-get -y install zlib1g-dev libdw-dev libiberty-dev
-    - name: Install Python packages
-      run: |
-          pip install --upgrade pip six setuptools codecov coverage
-    - name: Setup git configuration
-      run: |
-          # Need this for the git tests to succeed.
-          git --version
-          . .github/workflows/setup_git.sh
-    - name: Install kcov for bash script coverage
-      env:
-          KCOV_VERSION: 38
-      run: |
-          KCOV_ROOT=$(mktemp -d)
-          wget --output-document=${KCOV_ROOT}/${KCOV_VERSION}.tar.gz https://github.com/SimonKagstrom/kcov/archive/v${KCOV_VERSION}.tar.gz
-          tar -C ${KCOV_ROOT} -xzvf ${KCOV_ROOT}/${KCOV_VERSION}.tar.gz
-          mkdir -p ${KCOV_ROOT}/build
-          cd ${KCOV_ROOT}/build && cmake -Wno-dev ${KCOV_ROOT}/kcov-${KCOV_VERSION} && cd -
-          make -C ${KCOV_ROOT}/build && sudo  make -C ${KCOV_ROOT}/build install
-    - name: Run shell tests
-      env:
-          COVERAGE: true
-      run: |
-          share/spack/qa/run-shell-tests
-    - uses: codecov/codecov-action@v1
-      with:
-        flags: shelltests,linux
-
-  centos6:
-    # Test for Python2.6 run on Centos 6
-    runs-on: ubuntu-latest
-    container: spack/github-actions:centos6
-    steps:
-    - name: Run unit tests
-      env:
-          HOME: /home/spack-test
-      run: |
-          whoami && echo $HOME && cd $HOME
-          git clone https://github.com/spack/spack.git && cd spack
-          git fetch origin ${{ github.ref }}:test-branch
-          git checkout test-branch
-          share/spack/qa/run-unit-tests
-
-  clingo-cffi:
-    # Test for the clingo based solver (using clingo-cffi)
-    runs-on: ubuntu-latest
-    container: spack/github-actions:clingo-cffi
-    steps:
-      - name: Run unit tests
-        run: |
-          whoami && echo PWD=$PWD && echo HOME=$HOME && echo SPACK_TEST_SOLVER=$SPACK_TEST_SOLVER
-          python3 -c "import clingo; print(hasattr(clingo.Symbol, '_rep'), clingo.__version__)"
-          git clone https://github.com/spack/spack.git && cd spack
-          git fetch origin ${{ github.ref }}:test-branch
-          git checkout test-branch
-          . share/spack/setup-env.sh
-          spack compiler find
-          spack solve mpileaks%gcc
-          coverage run $(which spack) unit-test -v
-          coverage combine
-          coverage xml
-      - uses: codecov/codecov-action@v1
-        with:
-          flags: unittests,linux,clingo

.github/workflows/macos_python.yml

@@ -1,78 +0,0 @@
-# These are nightly package tests for macOS
-# focus areas:
-# - initial user experience
-# - scientific python stack
-name: macOS builds nightly
-
-on:
-  schedule:
-    # nightly at 1 AM
-    - cron: '0 1 * * *'
-  pull_request:
-    branches:
-    - develop
-    paths:
-      # Run if we modify this yaml file
-      - '.github/workflows/macos_python.yml'
-      # TODO: run if we touch any of the recipes involved in this
-
-# GitHub Action Limits
-# https://help.github.com/en/actions/reference/workflow-syntax-for-github-actions
-
-jobs:
-  install_gcc:
-    name: gcc with clang
-    runs-on: macos-latest
-    steps:
-    - uses: actions/checkout@v2
-    - uses: actions/setup-python@v2
-      with:
-        python-version: 3.9
-    - name: spack install
-      run: |
-        . .github/workflows/install_spack.sh
-        # 9.2.0 is the latest version on which we apply homebrew patch
-        spack install -v --fail-fast gcc@9.2.0 %apple-clang
-
-  install_jupyter_clang:
-    name: jupyter
-    runs-on: macos-latest
-    timeout-minutes: 700
-    steps:
-    - uses: actions/checkout@v2
-    - uses: actions/setup-python@v2
-      with:
-        python-version: 3.9
-    - name: spack install
-      run: |
-        . .github/workflows/install_spack.sh
-        spack install -v --fail-fast py-jupyterlab %apple-clang
-
-  install_scipy_clang:
-    name: scipy, mpl, pd
-    runs-on: macos-latest
-    steps:
-    - uses: actions/checkout@v2
-    - uses: actions/setup-python@v2
-      with:
-        python-version: 3.9
-    - name: spack install
-      run: |
-        . .github/workflows/install_spack.sh
-        spack install -v --fail-fast py-scipy %apple-clang
-        spack install -v --fail-fast py-matplotlib %apple-clang
-        spack install -v --fail-fast py-pandas %apple-clang
-
-  install_mpi4py_clang:
-    name: mpi4py, petsc4py
-    runs-on: macos-latest
-    steps:
-    - uses: actions/checkout@v2
-    - uses: actions/setup-python@v2
-      with:
-        python-version: 3.9
-    - name: spack install
-      run: |
-        . .github/workflows/install_spack.sh
-        spack install -v --fail-fast py-mpi4py %apple-clang
-        spack install -v --fail-fast py-petsc4py %apple-clang

.github/workflows/macos_unit_tests.yaml

@@ -1,44 +0,0 @@
-name: macos tests
-
-on:
-  push:
-    branches:
-      - develop
-      - releases/**
-  pull_request:
-    branches:
-      - develop
-      - releases/**
-jobs:
-  build:
-    runs-on: macos-latest
-    strategy:
-      matrix:
-        python-version: [3.8]
-    steps:
-    - uses: actions/checkout@v2
-      with:
-        fetch-depth: 0
-    - uses: actions/setup-python@v2
-      with:
-        python-version: ${{ matrix.python-version }}
-    - name: Install Python packages
-      run: |
-          pip install --upgrade pip six setuptools
-          pip install --upgrade codecov coverage
-          pip install --upgrade flake8 pep8-naming
-    - name: Setup Homebrew packages
-      run: |
-        brew install dash fish gcc gnupg2 kcov
-    - name: Run unit tests
-      run: |
-        git --version
-        . .github/workflows/setup_git.sh
-        . share/spack/setup-env.sh
-        coverage run $(which spack) unit-test
-        coverage combine
-        coverage xml
-    - uses: codecov/codecov-action@v1
-      with:
-        file: ./coverage.xml
-        flags: unittests,macos

.github/workflows/minimum_python_versions.yaml

@@ -0,0 +1,30 @@
+name: python version check
+
+on:
+  push:
+    branches:
+      - master
+      - develop
+  pull_request:
+    branches:
+      - master
+      - develop
+jobs:
+  validate:
+
+    runs-on: ubuntu-latest
+
+    steps:
+    - uses: actions/checkout@v1
+    - name: Setup Python
+      uses: actions/setup-python@v1
+      with:
+        python-version: 3.7
+    - name: Install Python Packages
+      run: |
+        pip install --upgrade pip
+        pip install --upgrade vermin
+    - name: Minimum Version (Spack's Core)
+      run: vermin --backport argparse -t=2.6- -t=3.5- -v lib/spack/spack/ lib/spack/llnl/ bin/
+    - name: Minimum Version (Repositories)
+      run: vermin --backport argparse -t=2.6- -t=3.5- -v var/spack/repos

.github/workflows/setup_git.sh

@@ -1,9 +0,0 @@
-#!/usr/bin/env sh
-git config --global user.email "spack@example.com"
-git config --global user.name "Test User"
-# With fetch-depth: 0 we have a remote develop
-# but not a local branch. Don't do this on develop
-if [ "$(git branch --show-current)" != "develop" ]
-then
-  git branch develop origin/develop
-fi

.github/workflows/style_and_docs.yaml

@@ -1,65 +0,0 @@
-name: style and docs
-
-on:
-  push:
-    branches:
-      - develop
-      - releases/**
-  pull_request:
-    branches:
-      - develop
-      - releases/**
-jobs:
-  validate:
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@v2
-    - uses: actions/setup-python@v2
-      with:
-        python-version: 3.9
-    - name: Install Python Packages
-      run: |
-        pip install --upgrade pip
-        pip install --upgrade vermin
-    - name: Minimum Version (Spack's Core)
-      run: vermin --backport argparse -t=2.6- -t=3.5- -v lib/spack/spack/ lib/spack/llnl/ bin/
-    - name: Minimum Version (Repositories)
-      run: vermin --backport argparse -t=2.6- -t=3.5- -v var/spack/repos
-  flake8:
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@v2
-      with:
-        fetch-depth: 0
-    - uses: actions/setup-python@v2
-      with:
-        python-version: 3.9
-    - name: Install Python packages
-      run: |
-        pip install --upgrade pip six setuptools flake8
-    - name: Setup git configuration
-      run: |
-        # Need this for the git tests to succeed.
-        git --version
-        . .github/workflows/setup_git.sh
-    - name: Run flake8 tests
-      run: |
-          share/spack/qa/run-flake8-tests
-  documentation:
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@v2
-    - uses: actions/setup-python@v2
-      with:
-        python-version: 3.9
-    - name: Install System packages
-      run: |
-        sudo apt-get -y update
-        sudo apt-get install -y coreutils ninja-build graphviz
-    - name: Install Python packages
-      run: |
-        pip install --upgrade pip six setuptools
-        pip install --upgrade -r lib/spack/docs/requirements.txt
-    - name: Build documentation
-      run: |
-          share/spack/qa/run-doc-tests

.gitignore

@@ -4,7 +4,6 @@
 /var/spack/environments
 /var/spack/repos/*/index.yaml
 /var/spack/repos/*/lock
-__pycache__/
 *.pyc
 /opt
 *~
@@ -23,18 +22,8 @@ __pycache__/
 .coverage
 \#*
 .#*
-.cache
 lib/spack/spack/test/.cache
 /bin/spackc
 *.in.log
 *.out.log
 *.orig
-
-# Eclipse files
-.project
-.cproject
-.pydevproject
-
-# VSCode files
-.vscode
-.devcontainer

.mailmap

@@ -20,8 +20,8 @@ Geoffrey Oxberry      <oxberry1@llnl.gov>               Geoffrey Oxberry
 Glenn Johnson         <glenn-johnson@uiowa.edu>         Glenn Johnson           <gjohnson@argon-ohpc.hpc.uiowa.edu>
 Glenn Johnson         <glenn-johnson@uiowa.edu>         Glenn Johnson           <glennpj@gmail.com>
 Gregory Becker        <becker33@llnl.gov>               Gregory Becker          <becker33.llnl.gov>
-Gregory Becker        <becker33@llnl.gov>               Gregory Becker          <becker33.llnl.gov>
-Gregory Becker        <becker33@llnl.gov>               Gregory Becker          <becker33@llnl.gov>
+Gregory Becker        <becker33@llnl.gov>               becker33                <becker33.llnl.gov>
+Gregory Becker        <becker33@llnl.gov>               becker33                <becker33@llnl.gov>
 Gregory L. Lee        <lee218@llnl.gov>                 Greg Lee                <lee218@llnl.gov>
 Gregory L. Lee        <lee218@llnl.gov>                 Gregory L. Lee          <lee218@cab687.llnl.gov>
 Gregory L. Lee        <lee218@llnl.gov>                 Gregory L. Lee          <lee218@cab690.llnl.gov>

.travis.yml

@@ -0,0 +1,168 @@
+#=============================================================================
+# Project settings
+#=============================================================================
+# Only build master and develop on push; do not build every branch.
+branches:
+  only:
+    - master
+    - develop
+    - /^releases\/.*$/
+
+#=============================================================================
+# Build matrix
+#=============================================================================
+
+dist: xenial
+
+jobs:
+  fast_finish: true
+  include:
+    - stage: 'style checks'
+      python: '3.8'
+      os: linux
+      language: python
+      env: TEST_SUITE=flake8
+# Shell integration with module files
+    - python: '3.8'
+      os: linux
+      language: python
+      env: [ TEST_SUITE=bootstrap ]
+    - stage: 'unit tests + documentation'
+      python: '2.6'
+      dist: trusty
+      os: linux
+      language: python
+      env: [ TEST_SUITE=unit, COVERAGE=true ]
+    - python: '2.7'
+      os: linux
+      language: python
+      env: [ TEST_SUITE=unit, COVERAGE=true ]
+    - python: '3.5'
+      os: linux
+      language: python
+      env: TEST_SUITE=unit
+    - python: '3.6'
+      os: linux
+      language: python
+      env: TEST_SUITE=unit
+    - python: '3.7'
+      os: linux
+      language: python
+      env: TEST_SUITE=unit
+    - python: '3.8'
+      os: linux
+      language: python
+      env: [ TEST_SUITE=unit, COVERAGE=true ]
+    - python: '3.8'
+      os: linux
+      language: python
+      env: TEST_SUITE=doc
+    - os: osx
+      language: generic
+      env: [ TEST_SUITE=unit, PYTHON_VERSION=2.7, COVERAGE=true ]
+      if: type != pull_request
+
+stages:
+  - 'style checks'
+  - 'unit tests + documentation'
+
+
+#=============================================================================
+# Environment
+#=============================================================================
+
+# Docs need graphviz to build
+addons:
+  # for Linux builds, we use APT
+  apt:
+    packages:
+      - ccache
+      - cmake
+      - gfortran
+      - graphviz
+      - gnupg2
+      - kcov
+      - mercurial
+      - ninja-build
+      - perl
+      - perl-base
+      - realpath
+      - r-base
+      - r-base-core
+      - r-base-dev
+      - zsh
+  # for Mac builds, we use Homebrew
+  homebrew:
+    packages:
+      - python@2
+      - gcc
+      - gnupg2
+      - ccache
+      - dash
+      - kcov
+    update: true
+
+# ~/.ccache needs to be cached directly as Travis is not taking care of it
+# (possibly because we use 'language: python' and not 'language: c')
+cache:
+  pip: true
+  ccache: true
+  directories:
+    - ~/.ccache
+
+# Work around Travis's lack of support for Python on OSX
+before_install:
+  - if [[ "$TRAVIS_OS_NAME" == "osx" ]]; then
+        pip2 install --upgrade pip;
+        pip2 install virtualenv;
+        virtualenv venv;
+        source venv/bin/activate;
+    fi
+  - ccache -M 2G && ccache -z
+
+# Install various dependencies
+install:
+  - pip install --upgrade pip
+  - pip install --upgrade six
+  - pip install --upgrade setuptools
+  - pip install --upgrade codecov coverage==4.5.4
+  - pip install --upgrade flake8
+  - pip install --upgrade pep8-naming
+  - if [[ "$TEST_SUITE" == "doc" ]]; then
+        pip install --upgrade -r lib/spack/docs/requirements.txt;
+    fi
+
+before_script:
+  # Need this for the git tests to succeed.
+  - git config --global user.email "spack@example.com"
+  - git config --global user.name "Test User"
+
+  # Need this to be able to compute the list of changed files
+  - git fetch origin ${TRAVIS_BRANCH}:${TRAVIS_BRANCH}
+
+#=============================================================================
+# Building
+#=============================================================================
+script:
+  - share/spack/qa/run-$TEST_SUITE-tests
+
+after_success:
+  - ccache -s
+  - case "$TEST_SUITE" in
+        unit)
+            if [[ "$COVERAGE" == "true" ]]; then
+                codecov --env PYTHON_VERSION
+                        --required
+                        --flags "${TEST_SUITE}${TRAVIS_OS_NAME}";
+            fi
+            ;;
+    esac
+
+#=============================================================================
+# Notifications
+#=============================================================================
+notifications:
+  email:
+    recipients: tgamblin@llnl.gov
+    on_success: change
+    on_failure: always

CHANGELOG.md

@@ -1,326 +1,16 @@
-# v0.16.2 (2021-05-22)
-
-* Major performance improvement for `spack load` and other commands. (#23661)
-* `spack fetch` is now environment-aware. (#19166)
-* Numerous fixes for the new, `clingo`-based concretizer. (#23016, #23307,
-  #23090, #22896, #22534, #20644, #20537, #21148)
-* Supoprt for automatically bootstrapping `clingo` from source. (#20652, #20657
-  #21364, #21446, #21913, #22354, #22444, #22460, #22489, #22610, #22631)
-* Python 3.10 support: `collections.abc` (#20441)
-* Fix import issues by using `__import__` instead of Spack package importe.
-  (#23288, #23290)
-* Bugfixes and `--source-dir` argument for `spack location`. (#22755, #22348,
-  #22321)
-* Better support for externals in shared prefixes. (#22653)
-* `spack build-env` now prefers specs defined in the active environment.
-  (#21642)
-* Remove erroneous warnings about quotes in `from_sourcing_files`. (#22767)
-* Fix clearing cache of `InternalConfigScope`. (#22609)
-* Bugfix for active when pkg is already active error. (#22587)
-* Make `SingleFileScope` able to repopulate the cache after clearing it.
-  (#22559)
-* Channelflow: Fix the package. (#22483)
-* More descriptive error message for bugs in `package.py` (#21811)
-* Use package-supplied `autogen.sh`. (#20319)
-* Respect `-k/verify-ssl-false` in `_existing_url` method. (#21864)
-
-
-# v0.16.1 (2021-02-22)
-
-This minor release includes a new feature and associated fixes:
-* intel-oneapi support through new packages (#20411, #20686, #20693, #20717,
-  #20732, #20808, #21377, #21448)
-
-This release also contains bug fixes/enhancements for:
-* HIP/ROCm support (#19715, #20095)
-* concretization (#19988, #20020, #20082, #20086, #20099, #20102, #20128,
-  #20182, #20193, #20194, #20196, #20203, #20247, #20259, #20307, #20362,
-  #20383, #20423, #20473, #20506, #20507, #20604, #20638, #20649, #20677,
-  #20680, #20790)
-* environment install reporting fix (#20004)
-* avoid import in ABI compatibility info (#20236)
-* restore ability of dev-build to skip patches (#20351)
-* spack find -d spec grouping (#20028)
-* spack smoke test support (#19987, #20298)
-* macOS fixes (#20038, #21662)
-* abstract spec comparisons (#20341)
-* continuous integration (#17563)
-* performance improvements for binary relocation (#19690, #20768)
-* additional sanity checks for variants in builtin packages (#20373)
-* do not pollute auto-generated configuration files with empty lists or
-  dicts (#20526)
-
-plus assorted documentation (#20021, #20174) and package bug fixes/enhancements
-(#19617, #19933, #19986, #20006, #20097, #20198, #20794, #20906, #21411).
-
-
-# v0.16.0 (2020-11-18)
-
-`v0.16.0` is a major feature release.
-
-## Major features in this release
-
-1. **New concretizer (experimental)** Our new backtracking concretizer is
-   now in Spack as an experimental feature. You will need to install
-   `clingo@master+python` and set `concretizer: clingo` in `config.yaml`
-   to use it. The original concretizer is not exhaustive and is not
-   guaranteed to find a solution if one exists. We encourage you to use
-   the new concretizer and to report any bugs you find with it. We
-   anticipate making the new concretizer the default and including all
-   required dependencies for it in Spack `v0.17`. For more details, see
-   #19501.
-
-2. **spack test (experimental)** Users can add `test()` methods to their
-   packages to run smoke tests on installations with the new `spack test`
-   command (the old `spack test` is now `spack unit-test`). `spack test`
-   is environment-aware, so you can `spack install` an environment and
-   `spack test run` smoke tests on all of its packages. Historical test
-   logs can be perused with `spack test results`. Generic smoke tests for
-   MPI implementations, C, C++, and Fortran compilers as well as specific
-   smoke tests for 18 packages. This is marked experimental because the
-   test API (`self.run_test()`) is likely to be change, but we encourage
-   users to upstream tests, and we will maintain and refactor any that
-   are added to mainline packages (#15702).
-
-3. **spack develop** New `spack develop` command allows you to develop
-   several packages at once within a Spack environment. Running
-   `spack develop foo@v1` and `spack develop bar@v2` will check
-    out specific versions of `foo` and `bar` into subdirectories, which you
-    can then build incrementally with `spack install ` (#15256).
-
-4. **More parallelism** Spack previously installed the dependencies of a
-   _single_ spec in parallel. Entire environments can now be installed in
-   parallel, greatly accelerating builds of large environments. get
-   parallelism from individual specs. Spack now parallelizes entire
-   environment builds (#18131).
-
-5. **Customizable base images for spack containerize**
-    `spack containerize` previously only output a `Dockerfile` based
-    on `ubuntu`. You may now specify any base image of your choosing (#15028).
-
-6. **more external finding** `spack external find` was added in `v0.15`,
-   but only `cmake` had support. `spack external find` can now find
-   `bison`, `cuda`, `findutils`, `flex`, `git`, `lustre` `m4`, `mpich`,
-   `mvapich2`, `ncurses`, `openmpi`, `perl`, `spectrum-mpi`, `tar`, and
-   `texinfo` on your system and add them automatically to
-   `packages.yaml`.
-
-7. **Support aocc, nvhpc, and oneapi compilers** We are aggressively
-   pursuing support for the newest vendor compilers, especially those for
-   the U.S. exascale and pre-exascale systems. Compiler classes and
-   auto-detection for `aocc`, `nvhpc`, `oneapi` are now in Spack (#19345,
-   #19294, #19330).
-
-## Additional new features of note
-
-* New `spack mark` command can be used to designate packages as explicitly
-  installed, so that `spack gc` will not garbage-collect them (#16662).
-* `install_tree` can be customized with Spack's projection format (#18341)
-* `sbang` now lives in the `install_tree` so that all users can access it (#11598)
-* `csh` and `tcsh` users no longer need to set `SPACK_ROOT` before
-  sourcing `setup-env.csh` (#18225)
-* Spec syntax now supports `variant=*` syntax for finding any package
-  that has a particular variant (#19381).
-* Spack respects `SPACK_GNUPGHOME` variable for custom GPG directories (#17139)
-* Spack now recognizes Graviton chips
-
-## Major refactors
-
-* Use spawn instead of fork on Python >= 3.8 on macOS (#18205)
-* Use indexes for public build caches (#19101, #19117, #19132, #19141,  #19209)
-* `sbang` is an external package now (https://github.com/spack/sbang, #19582)
-* `archspec` is an external package now (https://github.com/archspec/archspec, #19600)
-
-## Deprecations and Removals
-
-* `spack bootstrap` was deprecated in v0.14.0, and has now been removed.
-* `spack setup` is deprecated as of v0.16.0.
-* What was `spack test` is now called `spack unit-test`. `spack test` is
-  now the smoke testing feature in (2) above.
-
-## Bugfixes
-
-Some of the most notable bugfixes in this release include:
-
-* Better warning messages for deprecated syntax in `packages.yaml` (#18013)
-* `buildcache list --allarch` now works properly (#17827)
-* Many fixes and tests for buildcaches and binary relcoation (#15687,
-  *#17455, #17418, #17455, #15687, #18110)
-
-## Package Improvements
-
-Spack now has 5050 total packages, 720 of which were added since `v0.15`.
-
-* ROCm packages (`hip`, `aomp`, more) added by AMD (#19957, #19832, others)
-* Many improvements for ARM support
-* `llvm-flang`, `flang`, and `f18` removed, as `llvm` has real `flang`
-  support since Flang was merged to LLVM mainline
-* Emerging support for `spack external find` and `spack test` in packages.
-
-## Infrastructure
-
-* Major infrastructure improvements to pipelines on `gitlab.spack.io`
-* Support for testing PRs from forks (#19248) is being enabled for all
-  forks to enable rolling, up-to-date binary builds on `develop`
-
-
-# v0.15.4 (2020-08-12)
-
-This release contains one feature addition:
-
-* Users can set `SPACK_GNUPGHOME` to override Spack's GPG path (#17139)
-
-Several bugfixes for CUDA, binary packaging, and `spack -V`:
-
-* CUDA package's `.libs` method searches for `libcudart` instead of `libcuda` (#18000)
-* Don't set `CUDAHOSTCXX` in environments that contain CUDA (#17826)
-* `buildcache create`: `NoOverwriteException` is a warning, not an error (#17832)
-* Fix `spack buildcache list --allarch` (#17884)
-* `spack -V` works with `releases/latest` tag and shallow clones (#17884)
-
-And fixes for GitHub Actions and tests to ensure that CI passes on the
-release branch (#15687, #17279, #17328, #17377, #17732).
-
-# v0.15.3 (2020-07-28)
-
-This release contains the following bugfixes:
-
-* Fix handling of relative view paths (#17721)
-* Fixes for binary relocation (#17418, #17455)
-* Fix redundant printing of error messages in build environment (#17709)
-
-It also adds a support script for Spack tutorials:
-
-* Add a tutorial setup script to share/spack (#17705, #17722)
-
-# v0.15.2 (2020-07-23)
-
-This minor release includes two new features:
-
-* Spack install verbosity is decreased, and more debug levels are added (#17546)
-* The $spack/share/spack/keys directory contains public keys that may be optionally trusted for public binary mirrors (#17684)
-
-This release also includes several important fixes:
-
-* MPICC and related variables are now cleand in the build environment (#17450)
-* LLVM flang only builds CUDA offload components when +cuda (#17466)
-* CI pipelines no longer upload user environments that can contain secrets to the internet (#17545)
-* CI pipelines add bootstrapped compilers to the compiler config (#17536)
-* `spack buildcache list` does not exit on first failure and lists later mirrors (#17565)
-* Apple's "gcc" executable that is an apple-clang compiler does not generate a gcc compiler config (#17589)
-* Mixed compiler toolchains are merged more naturally across different compiler suffixes (#17590)
-* Cray Shasta platforms detect the OS properly (#17467)
-* Additional more minor fixes.
-
-# v0.15.1 (2020-07-10)
-
-This minor release includes several important fixes:
-
-* Fix shell support on Cray (#17386)
-* Fix use of externals installed with other Spack instances (#16954)
-* Fix gcc+binutils build (#9024)
-* Fixes for usage of intel-mpi (#17378 and #17382)
-* Fixes to Autotools config.guess detection (#17333 and #17356)
-* Update `spack install` message to prompt user when an environment is not
-  explicitly activated (#17454)
-
-This release also adds a mirror for all sources that are
-fetched in Spack (#17077). It is expected to be useful when the
-official website for a Spack package is unavailable.
-
-# v0.15.0 (2020-06-28)
-
-`v0.15.0` is a major feature release.
-
-## Major Features in this release
-
-1. **Cray support** Spack will now work properly on Cray "Cluster"
-systems (non XC systems) and after a `module purge` command on Cray
-systems. See #12989
-
-2. **Virtual package configuration** Virtual packages are allowed in
-packages.yaml configuration. This allows users to specify a virtual
-package as non-buildable without needing to specify for each
-implementation. See #14934
-
-3. **New config subcommands** This release adds `spack config add` and
-`spack config remove` commands to add to and remove from yaml
-configuration files from the CLI. See #13920
-
-4. **Environment activation** Anonymous environments are **no longer**
-automatically activated in the current working directory. To activate
-an environment from a `spack.yaml` file in the current directory, use
-the `spack env activate .` command. This removes a concern that users
-were too easily polluting their anonymous environments with accidental
-installations. See #17258
-
-5. **Apple clang compiler** The clang compiler and the apple-clang
-compiler are now separate compilers in Spack. This allows Spack to
-improve support for the apple-clang compiler. See #17110
-
-6. **Finding external packages** Spack packages can now support an API
-for finding external installations. This allows the `spack external
-find` command to automatically add installations of those packages to
-the user's configuration. See #15158
-
-
-## Additional new features of note
-
-* support for using Spack with the fish shell (#9279)
-* `spack load --first` option to load first match (instead of prompting user) (#15622)
-* support the Cray cce compiler both new and classic versions (#17256, #12989)
-* `spack dev-build` command:
-  * supports stopping before a specified phase (#14699)
-  * supports automatically launching a shell in the build environment (#14887)
-* `spack install --fail-fast` allows builds to fail at the first error (rather than best-effort) (#15295)
-* environments: SpecList references can be dereferenced as compiler or dependency constraints (#15245)
-* `spack view` command: new support for a copy/relocate view type (#16480)
-* ci pipelines: see documentation for several improvements
-* `spack mirror -a` command now supports excluding packages (#14154)
-* `spack buildcache create` is now environment-aware (#16580)
-* module generation: more flexible format for specifying naming schemes (#16629)
-* lmod module generation: packages can be configured as core specs for lmod hierarchy (#16517)
-
-## Deprecations and Removals
-
-The following commands were deprecated in v0.13.0, and have now been removed:
-
-* `spack configure`
-* `spack build`
-* `spack diy`
-
-The following commands were deprecated in v0.14.0, and will be removed in the next major release:
-
-* `spack bootstrap`
-
-## Bugfixes
-
-Some of the most notable bugfixes in this release include:
-
-* Spack environments can now contain the string `-h` (#15429)
-* The `spack install` gracefully handles being backgrounded (#15723, #14682)
-* Spack uses `-isystem` instead of `-I` in cases that the underlying build system does as well (#16077)
-* Spack no longer prints any specs that cannot be safely copied into a Spack command (#16462)
-* Incomplete Spack environments containing python no longer cause problems (#16473)
-* Several improvements to binary package relocation
-
-## Package Improvements
-
-The Spack project is constantly engaged in routine maintenance,
-bugfixes, and improvements for the package ecosystem. Of particular
-note in this release are the following:
-
-* Spack now contains 4339 packages. There are 430 newly supported packages in v0.15.0
-* GCC now builds properly on ARM architectures (#17280)
-* Python: patched to support compiling mixed C/C++ python modules through distutils (#16856)
-* improvements to pytorch and py-tensorflow packages
-* improvements to major MPI implementations: mvapich2, mpich, openmpi, and others
-
-## Spack Project Management:
-
-* Much of the Spack CI infrastructure has moved from Travis to GitHub Actions (#16610, #14220, #16345)
-* All merges to the `develop` branch run E4S CI pipeline (#16338)
-* New `spack debug report` command makes reporting bugs easier (#15834)
+# V0.14.3 (2020-07-10)
+
+This is a minor release on the `0.14` series. The latest release of
+Spack is `0.15.1`. This release includes bugfixes backported to the
+`0.14` series from `0.15.0` and `0.15.1`. These include
+
+* Spack has a public mirror for source files to prevent downtimes when sites go down (#17077)
+* Spack setup scripts no longer hang when sourced in .*rc files on Cray (#17386)
+* Spack commands no longer fail in incomplete spack environment (#16473)
+* Improved detection of config.guess and config.sub files (#16854, #17149, #17333, #17356)
+* GCC builds on aarch64 architectures and at spec `%gcc +binutils` (#17280, #9024)
+* Better cleaning of the build environment (#8623)
+* `spack versions` command no longer has potential to cause fork bomb (#16749)
 
 # v0.14.2 (2020-04-15)
 
@@ -364,7 +54,7 @@ This is a bugfix release on top of `v0.14.0`.  Specific fixes include:
 
 2.  **Build pipelines.** You can also build in parallel through Gitlab
    CI. Simply create a Spack environment and push it to Gitlab to build
-   on Gitlab runners. Pipeline support is now integrated into a single
+   on Gitlab runners. Pipeline support is now integreated into a single
    `spack ci` command, so setting it up is easier than ever.  See the
    [Pipelines section](https://spack.readthedocs.io/en/v0.14.0/pipelines.html)
    in the docs.
@@ -464,8 +154,8 @@ RHEL8.
 * mirror bugfixes: symlinks, duplicate patches, and exception handling (#13789)
 * don't try to fetch `BundlePackages` (#13908)
 * avoid re-fetching patches already added to a mirror (#13908)
-* avoid re-fetching already added patches (#13908)
-* avoid re-fetching already added patches (#13908)
+* avoid re-fetching alread added patches (#13908)
+* avoid re-fetching alread added patches (#13908)
 * allow repeated invocations of `spack mirror create` on the same dir (#13908)
 * bugfix for RHEL8 when `python` is unavailable (#14252)
 * improve concretization performance in environments (#14190)
@@ -772,4 +462,4 @@ version of all the changes since `v0.9.1`.
 - Switched from `nose` to `pytest` for unit tests.
   - Unit tests take 1 minute now instead of 8
 - Massively expanded documentation
-- Docs are now hosted on [spack.readthedocs.io](https://spack.readthedocs.io)
+- Docs are now hosted on [spack.readthedocs.io](http://spack.readthedocs.io)

COPYRIGHT

@@ -28,11 +28,9 @@ text in the license header:
 
 External Packages
 -------------------
-
-Spack bundles most external dependencies in lib/spack/external. It also
-includes the sbang tool directly in bin/sbang. These packages are covered
-by various permissive licenses. A summary listing follows. See the
-license included with each package for full details.
+Spack bundles its external dependencies in lib/spack/external.  These
+packages are covered by various permissive licenses.  A summary listing
+follows.  See the license included with each package for full details.
 
 PackageName: argparse
 PackageHomePage: https://pypi.python.org/pypi/argparse
@@ -78,10 +76,6 @@ PackageName: ruamel.yaml
 PackageHomePage: https://yaml.readthedocs.io/
 PackageLicenseDeclared: MIT
 
-PackageName: sbang
-PackageHomePage: https://github.com/spack/sbang
-PackageLicenseDeclared: Apache-2.0 OR MIT
-
 PackageName: six
 PackageHomePage: https://pypi.python.org/pypi/six
 PackageLicenseDeclared: MIT

LICENSE-MIT

@@ -1,21 +1,20 @@
-MIT License
+Copyright 2013-2020 Lawrence Livermore National Security, LLC and other
+Spack Project Developers. See the top-level COPYRIGHT file for details.
 
-Copyright (c) 2013-2020 LLNS, LLC and other Spack Project Developers.
+Permission is hereby granted, free of charge, to any person obtaining a
+copy of this software and associated documentation files (the "Software"),
+to deal in the Software without restriction, including without limitation
+the rights to use, copy, modify, merge, publish, distribute, sublicense,
+and/or sell copies of the Software, and to permit persons to whom the
+Software is furnished to do so, subject to the following conditions:
 
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
 
 THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+DEALINGS IN THE SOFTWARE.

README.md

@@ -1,9 +1,7 @@
 # <img src="https://cdn.rawgit.com/spack/spack/develop/share/spack/logo/spack-logo.svg" width="64" valign="middle" alt="Spack"/> Spack
 
-[![MacOS Tests](https://github.com/spack/spack/workflows/macos%20tests/badge.svg)](https://github.com/spack/spack/actions)
-[![Linux Tests](https://github.com/spack/spack/workflows/linux%20tests/badge.svg)](https://github.com/spack/spack/actions)
+[![Build Status](https://travis-ci.org/spack/spack.svg?branch=develop)](https://travis-ci.org/spack/spack)
 [![Linux Builds](https://github.com/spack/spack/workflows/linux%20builds/badge.svg)](https://github.com/spack/spack/actions)
-[![macOS Builds (nightly)](https://github.com/spack/spack/workflows/macOS%20builds%20nightly/badge.svg?branch=develop)](https://github.com/spack/spack/actions?query=workflow%3A%22macOS+builds+nightly%22)
 [![codecov](https://codecov.io/gh/spack/spack/branch/develop/graph/badge.svg)](https://codecov.io/gh/spack/spack)
 [![Read the Docs](https://readthedocs.org/projects/spack/badge/?version=latest)](https://spack.readthedocs.io)
 [![Slack](https://spackpm.herokuapp.com/badge.svg)](https://spackpm.herokuapp.com)
@@ -21,7 +19,7 @@ builds of the same package.  With Spack, you can build your software
 *all* the ways you want to.
 
 See the
-[Feature Overview](https://spack.readthedocs.io/en/latest/features.html)
+[Feature Overview](http://spack.readthedocs.io/en/latest/features.html)
 for examples and highlights.
 
 To install spack and your first package, make sure you have Python.
@@ -34,14 +32,14 @@ Then:
 Documentation
 ----------------
 
-[**Full documentation**](https://spack.readthedocs.io/) is available, or
+[**Full documentation**](http://spack.readthedocs.io/) is available, or
 run `spack help` or `spack help --all`.
 
 Tutorial
 ----------------
 
 We maintain a
-[**hands-on tutorial**](https://spack.readthedocs.io/en/latest/tutorial.html).
+[**hands-on tutorial**](http://spack.readthedocs.io/en/latest/tutorial.html).
 It covers basic to advanced usage, packaging, developer features, and large HPC
 deployments.  You can do all of the exercises on your own laptop using a
 Docker container.
@@ -73,33 +71,15 @@ When you send your request, make ``develop`` the destination branch on the
 
 Your PR must pass Spack's unit tests and documentation tests, and must be
 [PEP 8](https://www.python.org/dev/peps/pep-0008/) compliant.  We enforce
-these guidelines with our CI process. To run these tests locally, and for 
-helpful tips on git, see our
-[Contribution Guide](https://spack.readthedocs.io/en/latest/contribution_guide.html).
+these guidelines with [Travis CI](https://travis-ci.org/spack/spack).  To
+run these tests locally, and for helpful tips on git, see our
+[Contribution Guide](http://spack.readthedocs.io/en/latest/contribution_guide.html).
 
-Spack's `develop` branch has the latest contributions. Pull requests
-should target `develop`, and users who want the latest package versions,
-features, etc. can use `develop`.
-
-Releases
---------
-
-For multi-user site deployments or other use cases that need very stable
-software installations, we recommend using Spack's
-[stable releases](https://github.com/spack/spack/releases).
-
-Each Spack release series also has a corresponding branch, e.g.
-`releases/v0.14` has `0.14.x` versions of Spack, and `releases/v0.13` has
-`0.13.x` versions. We backport important bug fixes to these branches but
-we do not advance the package versions or make other changes that would
-change the way Spack concretizes dependencies within a release branch.
-So, you can base your Spack deployment on a release branch and `git pull`
-to get fixes, without the package churn that comes with `develop`.
-
-The latest release is always available with the `releases/latest` tag.
-
-See the [docs on releases](https://spack.readthedocs.io/en/latest/developer_guide.html#releases)
-for more details.
+Spack uses a rough approximation of the
+[Git Flow](http://nvie.com/posts/a-successful-git-branching-model/)
+branching model.  The ``develop`` branch contains the latest
+contributions, and ``master`` is always tagged and points to the latest
+stable release.
 
 Code of Conduct
 ------------------------
@@ -120,7 +100,7 @@ If you are referencing Spack in a publication, please cite the following paper:
 
  * Todd Gamblin, Matthew P. LeGendre, Michael R. Collette, Gregory L. Lee,
    Adam Moody, Bronis R. de Supinski, and W. Scott Futral.
-   [**The Spack Package Manager: Bringing Order to HPC Software Chaos**](https://www.computer.org/csdl/proceedings/sc/2015/3723/00/2807623.pdf).
+   [**The Spack Package Manager: Bringing Order to HPC Software Chaos**](http://www.computer.org/csdl/proceedings/sc/2015/3723/00/2807623.pdf).
    In *Supercomputing 2015 (SC’15)*, Austin, Texas, November 15-20 2015. LLNL-CONF-669890.
 
 License
@@ -140,4 +120,4 @@ See [LICENSE-MIT](https://github.com/spack/spack/blob/develop/LICENSE-MIT),
 
 SPDX-License-Identifier: (Apache-2.0 OR MIT)
 
-LLNL-CODE-811652
+LLNL-CODE-647188

bin/sbang

@@ -1,103 +1,114 @@
-#!/bin/sh
+#!/bin/bash
 #
 # Copyright 2013-2020 Lawrence Livermore National Security, LLC and other
-# sbang project developers. See the top-level COPYRIGHT file for details.
+# Spack Project Developers. See the top-level COPYRIGHT file for details.
 #
 # SPDX-License-Identifier: (Apache-2.0 OR MIT)
 
 #
 # `sbang`: Run scripts with long shebang lines.
 #
-# Many operating systems limit the length and number of possible
-# arguments in shebang lines, making it hard to use interpreters that are
-# deep in the directory hierarchy or require special arguments.
+# Many operating systems limit the length of shebang lines, making it
+# hard to use interpreters that are deep in the directory hierarchy.
+# `sbang` can run such scripts, either as a shebang interpreter, or
+# directly on the command line.
 #
-# To use, put the long shebang on the second line of your script, and
-# make sbang the interpreter, like this:
+# Usage
+# -----------------------------
+# Suppose you have a script, long-shebang.sh, like this:
 #
-#     #!/bin/sh /path/to/sbang
-#     #!/long/path/to/real/interpreter with arguments
+#     1    #!/very/long/path/to/some/interpreter
+#     2
+#     3    echo "success!"
 #
-# `sbang` will run the real interpreter with the script as its argument.
+# Invoking this script will result in an error on some OS's.  On
+# Linux, you get this:
 #
-# See https://github.com/spack/sbang for more details.
+#     $ ./long-shebang.sh
+#     -bash: ./long: /very/long/path/to/some/interp: bad interpreter:
+#            No such file or directory
+#
+# On Mac OS X, the system simply assumes the interpreter is the shell
+# and tries to run with it, which is likely not what you want.
+#
+#
+# `sbang` on the command line
+# -----------------------------
+# You can use `sbang` in two ways.  The first is to use it directly,
+# from the command line, like this:
+#
+#     $ sbang ./long-shebang.sh
+#     success!
+#
+#
+# `sbang` as the interpreter
+# -----------------------------
+# You can also use `sbang` *as* the interpreter for your script. Put
+# `#!/bin/bash /path/to/sbang` on line 1, and move the original
+# shebang to line 2 of the script:
+#
+#     1    #!/bin/bash /path/to/sbang
+#     2    #!/long/path/to/real/interpreter with arguments
+#     3
+#     4    echo "success!"
+#
+#     $ ./long-shebang.sh
+#     success!
+#
+# On Linux, you could shorten line 1 to `#!/path/to/sbang`, but other
+# operating systems like Mac OS X require the interpreter to be a
+# binary, so it's best to use `sbang` as a `bash` argument.
+# Obviously, for this to work, `sbang` needs to have a short enough
+# path that *it* will run without hitting OS limits.
+#
+# For Lua, scripts the second line can't start with #!, as # is not
+# the comment character in lua (even though lua ignores #! on the
+# *first* line of a script).  So, instrument a lua script like this,
+# using -- instead of # on the second line:
+#
+#     1    #!/bin/bash /path/to/sbang
+#     2    --!/long/path/to/lua with arguments
+#     3
+#     4    print "success!"
+#
+# How it works
+# -----------------------------
+# `sbang` is a very simple bash script. It looks at the first two
+# lines of a script argument and runs the last line starting with
+# `#!`, with the script as an argument. It also forwards arguments.
 #
-
-# Generic error handling
-die() {
-    echo "$@" 1>&2;
-    exit 1
-}
-
-# set SBANG_DEBUG to make the script print what would normally be executed.
-exec="exec"
-if [ -n "${SBANG_DEBUG}" ]; then
-    exec="echo "
-fi
 
 # First argument is the script we want to actually run.
 script="$1"
 
-# ensure that the script actually exists
-if [ -z "$script" ]; then
-    die "error: sbang requires exactly one argument"
-elif [ ! -f "$script" ]; then
-    die "$script: no such file or directory"
-fi
-
 # Search the first two lines of script for interpreters.
 lines=0
-while read -r line && [ $lines -ne 2 ]; do
-    if [ "${line#\#!}" != "$line" ]; then
-        shebang_line="${line#\#!}"
-    elif [ "${line#//!}" != "$line" ]; then      # // comments
-        shebang_line="${line#//!}"
-    elif [ "${line#--!}" != "$line" ]; then      # -- lua comments
-        shebang_line="${line#--!}"
-    elif [ "${line#<?php\ }" != "$line" ]; then  # php comments
-        shebang_line="${line#<?php\ \#!}"
-        shebang_line="${shebang_line%\ ?>}"
+while read line && ((lines < 2)) ; do
+    if [[ "$line" = '#!'* ]]; then
+        interpreter="${line#\#!}"
+    elif [[ "$line" = '//!'*node* ]]; then
+        interpreter="${line#//!}"
+    elif [[ "$line" = '--!'*lua* ]]; then
+        interpreter="${line#--!}"
     fi
     lines=$((lines+1))
 done < "$script"
+# this is ineeded for scripts with sbang parameter
+# like ones in intltool
+# #!/<spack-long-path>/perl -w
+# this is the interpreter line with all the parameters as a vector
+interpreter_v=(${interpreter})
+# this is the single interpreter path 
+interpreter_f="${interpreter_v[0]}"
 
-# error if we did not find any interpreter
-if [ -z "$shebang_line"  ]; then
-    die "error: sbang found no interpreter in $script"
-fi
-
-# parse out the interpreter and first argument
-IFS=' ' read -r interpreter arg1 rest <<EOF
-$shebang_line
-EOF
-
-# Determine if the interpreter is a particular program, accounting for the
-# '#!/usr/bin/env PROGRAM' convention. So:
-#
-#     interpreter_is perl
-#
-# will be true for '#!/usr/bin/perl' and '#!/usr/bin/env perl'
-interpreter_is() {
-    if [ "${interpreter##*/}" = "$1" ]; then
-        return 0
-    elif [ "$interpreter" = "/usr/bin/env" ] && [ "$arg1" = "$1" ]; then
-        return 0
+# Invoke any interpreter found, or raise an error if none was found.
+if [[ -n "$interpreter_f" ]]; then
+    if [[ "${interpreter_f##*/}" = "perl"* ]]; then
+        exec $interpreter -x "$@"
     else
-        return 1
+        exec $interpreter "$@"
     fi
-}
-
-if interpreter_is "sbang"; then
-    die "error: refusing to re-execute sbang to avoid infinite loop."
-fi
-
-# Finally invoke the real shebang line
-# ruby and perl need -x to ignore the first line of input (the sbang line)
-#
-if interpreter_is perl || interpreter_is ruby; then
-    # shellcheck disable=SC2086
-    $exec $shebang_line -x "$@"
 else
-    # shellcheck disable=SC2086
-    $exec $shebang_line "$@"
+    echo "error: sbang found no interpreter in $script"
+    exit 1
 fi

bin/spack

@@ -59,8 +59,6 @@ if 'ruamel.yaml' in sys.modules:
 if 'ruamel' in sys.modules:
     del sys.modules['ruamel']
 
-import spack.main  # noqa
-
 # Once we've set up the system path, run the spack main method
-if __name__ == "__main__":
-    sys.exit(spack.main.main())
+import spack.main  # noqa
+sys.exit(spack.main.main())

bin/spack-python

@@ -22,4 +22,4 @@
 #
 # This is compatible across platforms.
 #
-exec /usr/bin/env spack python "$@"
+/usr/bin/env spack python "$@"

etc/spack/defaults/config.yaml

@@ -16,17 +16,7 @@
 config:
   # This is the path to the root of the Spack install tree.
   # You can use $spack here to refer to the root of the spack instance.
-  install_tree:
-    root: $spack/opt/spack
-    projections:
-      all: "${ARCHITECTURE}/${COMPILERNAME}-${COMPILERVER}/${PACKAGE}-${VERSION}-${HASH}"
-    # install_tree can include an optional padded length (int or boolean)
-    # default is False (do not pad)
-    # if padded_length is True, Spack will pad as close to the system max path
-    # length as possible
-    # if padded_length is an integer, Spack will pad to that many characters,
-    # assuming it is higher than the length of the install_tree root.
-    # padded_length: 128
+  install_tree: $spack/opt/spack
 
 
   # Locations where templates should be found
@@ -34,6 +24,10 @@ config:
     - $spack/share/spack/templates
 
 
+  # Default directory layout
+  install_path_scheme: "${ARCHITECTURE}/${COMPILERNAME}-${COMPILERVER}/${PACKAGE}-${VERSION}-${HASH}"
+
+
   # Locations where different types of modules should be installed.
   module_roots:
     tcl:    $spack/share/spack/modules
@@ -70,10 +64,6 @@ config:
     - ~/.spack/stage
   # - $spack/var/spack/stage
 
-  # Directory in which to run tests and store test results.
-  # Tests will be stored in directories named by date/time and package
-  # name/hash.
-  test_stage: ~/.spack/test
 
   # Cache directory for already downloaded source tarballs and archived
   # repositories. This can be purged with `spack clean --downloads`.
@@ -85,12 +75,6 @@ config:
   misc_cache: ~/.spack/cache
 
 
-  # Timeout in seconds used for downloading sources etc. This only applies
-  # to the connection phase and can be increased for slow connections or
-  # servers. 0 means no timeout.
-  connect_timeout: 10
-
-
   # If this is false, tools like curl that use SSL will not verify
   # certifiates. (e.g., curl will use use the -k option)
   verify_ssl: true
@@ -149,20 +133,6 @@ config:
   ccache: false
 
 
-  # The concretization algorithm to use in Spack. Options are:
-  #
-  #   'original': Spack's original greedy, fixed-point concretizer. This
-  #       algorithm can make decisions too early and will not backtrack
-  #       sufficiently for many specs.
-  #
-  #   'clingo': Uses a logic solver under the hood to solve DAGs with full
-  #       backtracking and optimization for user preferences.
-  #
-  # 'clingo' currently requires the clingo ASP solver to be installed and
-  # built with python bindings. 'original' is built in.
-  concretizer: original
-
-
   # How long to wait to lock the Spack installation database. This lock is used
   # when Spack needs to manage its own package metadata and all operations are
   # expected to complete within the default time limit. The timeout should
@@ -177,13 +147,7 @@ config:
   # never succeed.
   package_lock_timeout: null
 
-
   # Control whether Spack embeds RPATH or RUNPATH attributes in ELF binaries.
   # Has no effect on macOS. DO NOT MIX these within the same install tree.
   # See the Spack documentation for details.
   shared_linking: 'rpath'
-
-
-  # Set to 'false' to allow installation on filesystems that doesn't allow setgid bit
-  # manipulation by unprivileged user (e.g. AFS)
-  allow_sgid: true

etc/spack/defaults/darwin/modules.yaml

@@ -16,6 +16,8 @@
 modules:
   prefix_inspections:
     lib:
+      - DYLD_LIBRARY_PATH
       - DYLD_FALLBACK_LIBRARY_PATH
     lib64:
+      - DYLD_LIBRARY_PATH
       - DYLD_FALLBACK_LIBRARY_PATH

etc/spack/defaults/darwin/packages.yaml

@@ -15,20 +15,13 @@
 # -------------------------------------------------------------------------
 packages:
   all:
-    compiler:
-    - apple-clang
-    - clang
-    - gcc
-    - intel
+    compiler: [clang, gcc, intel]
     providers:
-      elf:
-      - libelf
-      unwind:
-      - apple-libunwind
+      elf: [libelf]
+      unwind: [apple-libunwind]
   apple-libunwind:
-    buildable: false
-    externals:
+    paths:
     # Apple bundles libunwind version 35.3 with macOS 10.9 and later,
     # although the version number used here isn't critical
-    - spec: apple-libunwind@35.3
-      prefix: /usr
+      apple-libunwind@35.3: /usr
+    buildable: False

etc/spack/defaults/modules.yaml

@@ -30,11 +30,7 @@ modules:
     lib64:
       - LIBRARY_PATH
     include:
-      - C_INCLUDE_PATH
-      - CPLUS_INCLUDE_PATH
-      # The INCLUDE env variable specifies paths to look for
-      # .mod file for Intel Fortran compilers
-      - INCLUDE
+      - CPATH
     lib/pkgconfig:
       - PKG_CONFIG_PATH
     lib64/pkgconfig:

etc/spack/defaults/packages.yaml

@@ -15,40 +15,36 @@
 # -------------------------------------------------------------------------
 packages:
   all:
-    compiler: [gcc, intel, pgi, clang, xl, nag, fj, aocc]
+    compiler: [gcc, intel, pgi, clang, xl, nag, fj]
     providers:
       D: [ldc]
       awk: [gawk]
-      blas: [openblas, amdblis]
+      blas: [openblas]
       daal: [intel-daal]
       elf: [elfutils]
-      fftw-api: [fftw, amdfftw]
-      gl: [mesa+opengl, mesa18+opengl, opengl]
-      glx: [mesa+glx, mesa18+glx, opengl]
+      fftw-api: [fftw]
+      gl: [mesa+opengl, opengl]
+      glx: [mesa+glx, opengl]
       glu: [mesa-glu, openglu]
       golang: [gcc]
-      iconv: [libiconv]
       ipp: [intel-ipp]
       java: [openjdk, jdk, ibm-java]
       jpeg: [libjpeg-turbo, libjpeg]
-      lapack: [openblas, amdlibflame]
+      lapack: [openblas]
       mariadb-client: [mariadb-c-client, mariadb]
       mkl: [intel-mkl]
       mpe: [mpe2]
       mpi: [openmpi, mpich]
       mysql-client: [mysql, mariadb-c-client]
       opencl: [pocl]
-      osmesa: [mesa+osmesa, mesa18+osmesa]
       pil: [py-pillow]
       pkgconfig: [pkgconf, pkg-config]
-      rpc: [libtirpc]
-      scalapack: [netlib-scalapack, amdscalapack]
+      scalapack: [netlib-scalapack]
       sycl: [hipsycl]
       szip: [libszip, libaec]
       tbb: [intel-tbb]
       unwind: [libunwind]
-      yacc: [bison, byacc]
-      flame: [libflame, amdlibflame]
+      sycl: [hipsycl]
     permissions:
       read: world
       write: user

lib/spack/docs/_gh_pages_redirect/index.html

@@ -1,10 +1,10 @@
 <html>
   <head>
-    <meta http-equiv="refresh" content="0; url=https://spack.readthedocs.io/" />
+    <meta http-equiv="refresh" content="0; url=http://spack.readthedocs.io/" />
   </head>
   <body>
     <p>
-      This page has moved to <a href="https://spack.readthedocs.io/">https://spack.readthedocs.io/</a>
+      This page has moved to <a href="http://spack.readthedocs.io/">http://spack.readthedocs.io/</a>
     </p>
   </body>
 </html>

lib/spack/docs/basic_usage.rst

@@ -25,14 +25,6 @@ It is recommended that the following be put in your ``.bashrc`` file:
 
     alias less='less -R'
 
-If you do not see colorized output when using ``less -R`` it is because color
-is being disabled in the piped output. In this case, tell spack to force
-colorized output.
-
-.. code-block:: console
-
-    $ spack --color always | less -R
-
 --------------------------
 Listing available packages
 --------------------------
@@ -53,7 +45,7 @@ can install:
 .. command-output:: spack list
    :ellipsis: 10
 
-There are thousands of them, so we've truncated the output above, but you
+There are thosands of them, so we've truncated the output above, but you
 can find a :ref:`full list here <package-list>`.
 Packages are listed by name in alphabetical order.
 A pattern to match with no wildcards, ``*`` or ``?``,
@@ -132,28 +124,32 @@ If ``mpileaks`` depends on other packages, Spack will install the
 dependencies first.  It then fetches the ``mpileaks`` tarball, expands
 it, verifies that it was downloaded without errors, builds it, and
 installs it in its own directory under ``$SPACK_ROOT/opt``. You'll see
-a number of messages from Spack, a lot of build output, and a message
-that the package is installed.  Add one or more debug options (``-d``)
-to get increasingly detailed output.
+a number of messages from spack, a lot of build output, and a message
+that the packages is installed:
 
 .. code-block:: console
 
    $ spack install mpileaks
-   ... dependency build output ...
-   ==> Installing mpileaks-1.0-ph7pbnhl334wuhogmugriohcwempqry2
-   ==> No binary for mpileaks-1.0-ph7pbnhl334wuhogmugriohcwempqry2 found: installing from source
-   ==> mpileaks: Executing phase: 'autoreconf'
-   ==> mpileaks: Executing phase: 'configure'
-   ==> mpileaks: Executing phase: 'build'
-   ==> mpileaks: Executing phase: 'install'
-   [+] ~/spack/opt/linux-rhel7-broadwell/gcc-8.1.0/mpileaks-1.0-ph7pbnhl334wuhogmugriohcwempqry2
+   ==> Installing mpileaks
+   ==> mpich is already installed in ~/spack/opt/linux-debian7-x86_64/gcc@4.4.7/mpich@3.0.4.
+   ==> callpath is already installed in ~/spack/opt/linux-debian7-x86_64/gcc@4.4.7/callpath@1.0.2-5dce4318.
+   ==> adept-utils is already installed in ~/spack/opt/linux-debian7-x86_64/gcc@4.4.7/adept-utils@1.0-5adef8da.
+   ==> Trying to fetch from https://github.com/hpc/mpileaks/releases/download/v1.0/mpileaks-1.0.tar.gz
+   ######################################################################## 100.0%
+   ==> Staging archive: ~/spack/var/spack/stage/mpileaks@1.0%gcc@4.4.7 arch=linux-debian7-x86_64-59f6ad23/mpileaks-1.0.tar.gz
+   ==> Created stage in ~/spack/var/spack/stage/mpileaks@1.0%gcc@4.4.7 arch=linux-debian7-x86_64-59f6ad23.
+   ==> No patches needed for mpileaks.
+   ==> Building mpileaks.
+
+   ... build output ...
+
+   ==> Successfully installed mpileaks.
+     Fetch: 2.16s.  Build: 9.82s.  Total: 11.98s.
+   [+] ~/spack/opt/linux-debian7-x86_64/gcc@4.4.7/mpileaks@1.0-59f6ad23
 
 The last line, with the ``[+]``, indicates where the package is
 installed.
 
-Add the debug option -- ``spack  install -d mpileaks`` -- to get additional
-output.
-
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^
 Building a specific version
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -271,7 +267,7 @@ the ``spack gc`` ("garbage collector") command, which will uninstall all unneede
    -- linux-ubuntu18.04-broadwell / gcc@9.0.1 ----------------------
    hdf5@1.10.5  libiconv@1.16  libpciaccess@0.13.5  libszip@2.1.1  libxml2@2.9.9  mpich@3.3.2  openjpeg@2.3.1  xz@5.2.4  zlib@1.2.11
 
-In the example above Spack went through all the packages in the package database
+In the example above Spack went through all the packages in the DB
 and removed everything that is not either:
 
 1. A package installed upon explicit request of the user
@@ -280,102 +276,6 @@ and removed everything that is not either:
 You can check :ref:`cmd-spack-find-metadata` to see how to query for explicitly installed packages
 or :ref:`dependency-types` for a more thorough treatment of dependency types.
 
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Marking packages explicit or implicit
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-By default, Spack will mark packages a user installs as explicitly installed,
-while all of its dependencies will be marked as implicitly installed. Packages
-can be marked manually as explicitly or implicitly installed by using
-``spack mark``. This can be used in combination with ``spack gc`` to clean up
-packages that are no longer required.
-
-.. code-block:: console
-
-  $ spack install m4
-  ==> 29005: Installing libsigsegv
-  [...]
-  ==> 29005: Installing m4
-  [...]
-
-  $ spack install m4 ^libsigsegv@2.11
-  ==> 39798: Installing libsigsegv
-  [...]
-  ==> 39798: Installing m4
-  [...]
-
-  $ spack find -d
-  ==> 4 installed packages
-  -- linux-fedora32-haswell / gcc@10.1.1 --------------------------
-  libsigsegv@2.11
-
-  libsigsegv@2.12
-
-  m4@1.4.18
-      libsigsegv@2.12
-
-  m4@1.4.18
-      libsigsegv@2.11
-
-  $ spack gc
-  ==> There are no unused specs. Spack's store is clean.
-
-  $ spack mark -i m4 ^libsigsegv@2.11
-  ==> m4@1.4.18 : marking the package implicit
-
-  $ spack gc
-  ==> The following packages will be uninstalled:
-
-      -- linux-fedora32-haswell / gcc@10.1.1 --------------------------
-      5fj7p2o libsigsegv@2.11  c6ensc6 m4@1.4.18
-
-  ==> Do you want to proceed? [y/N]
-
-In the example above, we ended up with two versions of ``m4`` since they depend
-on different versions of ``libsigsegv``. ``spack gc`` will not remove any of
-the packages since both versions of ``m4`` have been installed explicitly
-and both versions of ``libsigsegv`` are required by the ``m4`` packages.
-
-``spack mark`` can also be used to implement upgrade workflows. The following
-example demonstrates how the ``spack mark`` and ``spack gc`` can be used to
-only keep the current version of a package installed.
-
-When updating Spack via ``git pull``, new versions for either ``libsigsegv``
-or ``m4`` might be introduced. This will cause Spack to install duplicates.
-Since we only want to keep one version, we mark everything as implicitly
-installed before updating Spack. If there is no new version for either of the
-packages, ``spack install`` will simply mark them as explicitly installed and
-``spack gc`` will not remove them.
-
-.. code-block:: console
-
-  $ spack install m4
-  ==> 62843: Installing libsigsegv
-  [...]
-  ==> 62843: Installing m4
-  [...]
-
-  $ spack mark -i -a
-  ==> m4@1.4.18 : marking the package implicit
-
-  $ git pull
-  [...]
-
-  $ spack install m4
-  [...]
-  ==> m4@1.4.18 : marking the package explicit
-  [...]
-
-  $ spack gc
-  ==> There are no unused specs. Spack's store is clean.
-
-When using this workflow for installations that contain more packages, care
-has to be taken to either only mark selected packages or issue ``spack install``
-for all packages that should be kept.
-
-You can check :ref:`cmd-spack-find-metadata` to see how to query for explicitly
-or implicitly installed packages.
-
 ^^^^^^^^^^^^^^^^^^^^^^^^^
 Non-Downloadable Tarballs
 ^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -421,6 +321,85 @@ the tarballs in question to it (see :ref:`mirrors`):
 
        $ spack install galahad
 
+-----------------------------
+Deprecating insecure packages
+-----------------------------
+
+``spack deprecate`` allows for the removal of insecure packages with
+minimal impact to their dependents.
+
+.. warning::
+
+  The ``spack deprecate`` command is designed for use only in
+  extraordinary circumstances. This is a VERY big hammer to be used
+  with care.
+
+The ``spack deprecate`` command will remove one package and replace it
+with another by replacing the deprecated package's prefix with a link
+to the deprecator package's prefix.
+
+.. warning::
+
+  The ``spack deprecate`` command makes no promises about binary
+  compatibility. It is up to the user to ensure the deprecator is
+  suitable for the deprecated package.
+
+Spack tracks concrete deprecated specs and ensures that no future packages
+concretize to a deprecated spec.
+
+The first spec given to the ``spack deprecate`` command is the package
+to deprecate. It is an abstract spec that must describe a single
+installed package. The second spec argument is the deprecator
+spec. By default it must be an abstract spec that describes a single
+installed package, but with the ``-i/--install-deprecator`` it can be
+any abstract spec that Spack will install and then use as the
+deprecator. The ``-I/--no-install-deprecator`` option will ensure
+the default behavior.
+
+By default, ``spack deprecate`` will deprecate all dependencies of the
+deprecated spec, replacing each by the dependency of the same name in
+the deprecator spec. The ``-d/--dependencies`` option will ensure the
+default, while the ``-D/--no-dependencies`` option will deprecate only
+the root of the deprecate spec in favor of the root of the deprecator
+spec.
+
+``spack deprecate`` can use symbolic links or hard links. The default
+behavior is symbolic links, but the ``-l/--link-type`` flag can take
+options ``hard`` or ``soft``.
+
+-----------------------
+Verifying installations
+-----------------------
+
+The ``spack verify`` command can be used to verify the validity of
+Spack-installed packages any time after installation.
+
+At installation time, Spack creates a manifest of every file in the
+installation prefix. For links, Spack tracks the mode, ownership, and
+destination. For directories, Spack tracks the mode, and
+ownership. For files, Spack tracks the mode, ownership, modification
+time, hash, and size. The Spack verify command will check, for every
+file in each package, whether any of those attributes have changed. It
+will also check for newly added files or deleted files from the
+installation prefix. Spack can either check all installed packages
+using the `-a,--all` or accept specs listed on the command line to
+verify.
+
+The ``spack verify`` command can also verify for individual files that
+they haven't been altered since installation time. If the given file
+is not in a Spack installation prefix, Spack will report that it is
+not owned by any package. To check individual files instead of specs,
+use the ``-f,--files`` option.
+
+Spack installation manifests are part of the tarball signed by Spack
+for binary package distribution. When installed from a binary package,
+Spack uses the packaged installation manifest instead of creating one
+at install time.
+
+The ``spack verify`` command also accepts the ``-l,--local`` option to
+check only local packages (as opposed to those used transparently from
+``upstream`` spack instances) and the ``-j,--json`` option to output
+machine-readable json data for any errors.
 
 -------------------------
 Seeing installed packages
@@ -640,8 +619,8 @@ output metadata on specs and all dependencies as json:
        "target": "x86_64"
       },
       "compiler": {
-       "name": "apple-clang",
-       "version": "10.0.0"
+       "name": "clang",
+       "version": "10.0.0-apple"
       },
       "namespace": "builtin",
       "parameters": {
@@ -689,95 +668,6 @@ structured the way you want:
       "hash": "zvaa4lhlhilypw5quj3akyd3apbq5gap"
     }
 
-
-------------------------
-Using installed packages
-------------------------
-
-There are several different ways to use Spack packages once you have
-installed them. As you've seen, spack packages are installed into long
-paths with hashes, and you need a way to get them into your path. The
-easiest way is to use :ref:`spack load <cmd-spack-load>`, which is
-described in the next section.
-
-Some more advanced ways to use Spack packages include:
-
-* :ref:`environments <environments>`, which you can use to bundle a
-  number of related packages to "activate" all at once, and
-* :ref:`environment modules <modules>`, which are commonly used on
-  supercomputing clusters. Spack generates module files for every
-  installation automatically, and you can customize how this is done.
-
-.. _cmd-spack-load:
-
-^^^^^^^^^^^^^^^^^^^^^^^
-``spack load / unload``
-^^^^^^^^^^^^^^^^^^^^^^^
-
-If you have :ref:`shell support <shell-support>` enabled you can use the
-``spack load`` command to quickly get a package on your ``PATH``.
-
-For example this will add the ``mpich`` package built with ``gcc`` to
-your path:
-
-.. code-block:: console
-
-   $ spack install mpich %gcc@4.4.7
-
-   # ... wait for install ...
-
-   $ spack load mpich %gcc@4.4.7
-   $ which mpicc
-   ~/spack/opt/linux-debian7-x86_64/gcc@4.4.7/mpich@3.0.4/bin/mpicc
-
-These commands will add appropriate directories to your ``PATH``,
-``MANPATH``, ``CPATH``, and ``LD_LIBRARY_PATH`` according to the
-:ref:`prefix inspections <customize-env-modifications>` defined in your
-modules configuration.  When you no longer want to use a package, you
-can type unload or unuse similarly:
-
-.. code-block:: console
-
-   $ spack unload mpich %gcc@4.4.7
-
-
-"""""""""""""""
-Ambiguous specs
-"""""""""""""""
-
-If a spec used with load/unload or is ambiguous (i.e. more than one
-installed package matches it), then Spack will warn you:
-
-.. code-block:: console
-
-   $ spack load libelf
-   ==> Error: libelf matches multiple packages.
-   Matching packages:
-     qmm4kso libelf@0.8.13%gcc@4.4.7 arch=linux-debian7-x86_64
-     cd2u6jt libelf@0.8.13%intel@15.0.0 arch=linux-debian7-x86_64
-   Use a more specific spec
-
-You can either type the ``spack load`` command again with a fully
-qualified argument, or you can add just enough extra constraints to
-identify one package.  For example, above, the key differentiator is
-that one ``libelf`` is built with the Intel compiler, while the other
-used ``gcc``.  You could therefore just type:
-
-.. code-block:: console
-
-   $ spack load libelf %intel
-
-To identify just the one built with the Intel compiler. If you want to be
-*very* specific, you can load it by its hash. For example, to load the
-first ``libelf`` above, you would run:
-
-.. code-block:: console
-
-   $ spack load /qmm4kso
-
-We'll learn more about Spack's spec syntax in the next section.
-
-
 .. _sec-specs:
 
 --------------------
@@ -797,11 +687,11 @@ Here is an example of a much longer spec than we've seen thus far:
 
 .. code-block:: none
 
-   mpileaks @1.2:1.4 %gcc@4.7.5 +debug -qt target=x86_64 ^callpath @1.1 %gcc@4.7.2
+   mpileaks @1.2:1.4 %gcc@4.7.5 +debug -qt arch=bgq_os ^callpath @1.1 %gcc@4.7.2
 
 If provided to ``spack install``, this will install the ``mpileaks``
 library at some version between ``1.2`` and ``1.4`` (inclusive),
-built using ``gcc`` at version 4.7.5 for a generic ``x86_64`` architecture,
+built using ``gcc`` at version 4.7.5 for the Blue Gene/Q architecture,
 with debug options enabled, and without Qt support.  Additionally, it
 says to link it with the ``callpath`` library (which it depends on),
 and to build callpath with ``gcc`` 4.7.2.  Most specs will not be as
@@ -964,7 +854,7 @@ Variants are named options associated with a particular package. They are
 optional, as each package must provide default values for each variant it
 makes available. Variants can be specified using
 a flexible parameter syntax ``name=<value>``. For example,
-``spack install libelf debug=True`` will install libelf built with debug
+``spack install libelf debug=True`` will install libelf build with debug
 flags. The names of particular variants available for a package depend on
 what was provided by the package author. ``spack info <package>`` will
 provide information on what build variants are available.
@@ -1027,7 +917,7 @@ contains any spaces. Any of ``cppflags=-O3``, ``cppflags="-O3"``,
 ``cppflags='-O3'``, and ``cppflags="-O3 -fPIC"`` are acceptable, but
 ``cppflags=-O3 -fPIC`` is not. Additionally, if the value of the
 compiler flags is not the last thing on the line, it must be followed
-by a space. The command ``spack install libelf cppflags="-O3"%intel``
+by a space. The commmand ``spack install libelf cppflags="-O3"%intel``
 will be interpreted as an attempt to set ``cppflags="-O3%intel"``.
 
 The six compiler flags are injected in the order of implicit make commands
@@ -1177,13 +1067,13 @@ of failing:
 In the snippet above, for instance, the microarchitecture was demoted to ``haswell`` when
 compiling with ``gcc@4.8`` since support to optimize for ``broadwell`` starts from ``gcc@4.9:``.
 
-Finally, if Spack has no information to match compiler and target, it will
+Finally if Spack has no information to match compiler and target, it will
 proceed with the installation but avoid injecting any microarchitecture
 specific flags.
 
 .. warning::
 
-   Currently, Spack doesn't print any warning to the user if it has no information
+   Currently Spack doesn't print any warning to the user if it has no information
    on which optimization flags should be used for a given compiler. This behavior
    might change in the future.
 
@@ -1193,7 +1083,7 @@ specific flags.
 Virtual dependencies
 --------------------
 
-The dependency graph for ``mpileaks`` we saw above wasn't *quite*
+The dependence graph for ``mpileaks`` we saw above wasn't *quite*
 accurate.  ``mpileaks`` uses MPI, which is an interface that has many
 different implementations.  Above, we showed ``mpileaks`` and
 ``callpath`` depending on ``mpich``, which is one *particular*
@@ -1336,90 +1226,6 @@ add a version specifier to the spec:
 Notice that the package versions that provide insufficient MPI
 versions are now filtered out.
 
-
------------------------------
-Deprecating insecure packages
------------------------------
-
-``spack deprecate`` allows for the removal of insecure packages with
-minimal impact to their dependents.
-
-.. warning::
-
-  The ``spack deprecate`` command is designed for use only in
-  extraordinary circumstances. This is a VERY big hammer to be used
-  with care.
-
-The ``spack deprecate`` command will remove one package and replace it
-with another by replacing the deprecated package's prefix with a link
-to the deprecator package's prefix.
-
-.. warning::
-
-  The ``spack deprecate`` command makes no promises about binary
-  compatibility. It is up to the user to ensure the deprecator is
-  suitable for the deprecated package.
-
-Spack tracks concrete deprecated specs and ensures that no future packages
-concretize to a deprecated spec.
-
-The first spec given to the ``spack deprecate`` command is the package
-to deprecate. It is an abstract spec that must describe a single
-installed package. The second spec argument is the deprecator
-spec. By default it must be an abstract spec that describes a single
-installed package, but with the ``-i/--install-deprecator`` it can be
-any abstract spec that Spack will install and then use as the
-deprecator. The ``-I/--no-install-deprecator`` option will ensure
-the default behavior.
-
-By default, ``spack deprecate`` will deprecate all dependencies of the
-deprecated spec, replacing each by the dependency of the same name in
-the deprecator spec. The ``-d/--dependencies`` option will ensure the
-default, while the ``-D/--no-dependencies`` option will deprecate only
-the root of the deprecate spec in favor of the root of the deprecator
-spec.
-
-``spack deprecate`` can use symbolic links or hard links. The default
-behavior is symbolic links, but the ``-l/--link-type`` flag can take
-options ``hard`` or ``soft``.
-
------------------------
-Verifying installations
------------------------
-
-The ``spack verify`` command can be used to verify the validity of
-Spack-installed packages any time after installation.
-
-At installation time, Spack creates a manifest of every file in the
-installation prefix. For links, Spack tracks the mode, ownership, and
-destination. For directories, Spack tracks the mode, and
-ownership. For files, Spack tracks the mode, ownership, modification
-time, hash, and size. The Spack verify command will check, for every
-file in each package, whether any of those attributes have changed. It
-will also check for newly added files or deleted files from the
-installation prefix. Spack can either check all installed packages
-using the `-a,--all` or accept specs listed on the command line to
-verify.
-
-The ``spack verify`` command can also verify for individual files that
-they haven't been altered since installation time. If the given file
-is not in a Spack installation prefix, Spack will report that it is
-not owned by any package. To check individual files instead of specs,
-use the ``-f,--files`` option.
-
-Spack installation manifests are part of the tarball signed by Spack
-for binary package distribution. When installed from a binary package,
-Spack uses the packaged installation manifest instead of creating one
-at install time.
-
-The ``spack verify`` command also accepts the ``-l,--local`` option to
-check only local packages (as opposed to those used transparently from
-``upstream`` spack instances) and the ``-j,--json`` option to output
-machine-readable json data for any errors.
-
-
-.. _extensions:
-
 ---------------------------
 Extensions & Python support
 ---------------------------
@@ -1427,7 +1233,8 @@ Extensions & Python support
 Spack's installation model assumes that each package will live in its
 own install prefix.  However, certain packages are typically installed
 *within* the directory hierarchy of other packages.  For example,
-`Python <https://www.python.org>`_ packages are typically installed in the
+modules in interpreted languages like `Python
+<https://www.python.org>`_ are typically installed in the
 ``$prefix/lib/python-2.7/site-packages`` directory.
 
 Spack has support for this type of installation as well.  In Spack,
@@ -1603,12 +1410,12 @@ packages listed as activated:
    py-nose@1.3.4  py-numpy@1.9.1  py-setuptools@11.3.1
 
 Now, when a user runs python, ``numpy`` will be available for import
-*without* the user having to explicitly load it.  ``python@2.7.8`` now
+*without* the user having to explicitly loaded.  ``python@2.7.8`` now
 acts like a system Python installation with ``numpy`` installed inside
 of it.
 
 Spack accomplishes this by symbolically linking the *entire* prefix of
-the ``py-numpy`` package into the prefix of the ``python`` package.  To the
+the ``py-numpy`` into the prefix of the ``python`` package.  To the
 python interpreter, it looks like ``numpy`` is installed in the
 ``site-packages`` directory.
 

lib/spack/docs/binary_caches.rst

@@ -57,12 +57,6 @@ Build caches are installed via:
 
    $ spack buildcache install
 
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-List of popular build caches
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-* `Extreme-scale Scientific Software Stack (E4S) <https://e4s-project.github.io/>`_: `build cache <https://oaciss.uoregon.edu/e4s/inventory.html>`_
-
 
 ----------
 Relocation

lib/spack/docs/build_settings.rst

@@ -57,13 +57,10 @@ directory. Here's an example of an external configuration:
 
    packages:
      openmpi:
-       externals:
-       - spec: "openmpi@1.4.3%gcc@4.4.7 arch=linux-debian7-x86_64"
-         prefix: /opt/openmpi-1.4.3
-       - spec: "openmpi@1.4.3%gcc@4.4.7 arch=linux-debian7-x86_64+debug"
-         prefix: /opt/openmpi-1.4.3-debug
-       - spec: "openmpi@1.6.5%intel@10.1 arch=linux-debian7-x86_64"
-         prefix: /opt/openmpi-1.6.5-intel
+       paths:
+         openmpi@1.4.3%gcc@4.4.7 arch=linux-debian7-x86_64: /opt/openmpi-1.4.3
+         openmpi@1.4.3%gcc@4.4.7 arch=linux-debian7-x86_64+debug: /opt/openmpi-1.4.3-debug
+         openmpi@1.6.5%intel@10.1 arch=linux-debian7-x86_64: /opt/openmpi-1.6.5-intel
 
 This example lists three installations of OpenMPI, one built with GCC,
 one built with GCC and debug information, and another built with Intel.
@@ -79,15 +76,13 @@ of the installation prefixes.  The following example says that module
 .. code-block:: yaml
 
    cmake:
-     externals:
-     - spec: cmake@3.7.2
-       modules:
-       - CMake/3.7.2
+     modules:
+       cmake@3.7.2: CMake/3.7.2
 
-Each ``packages.yaml`` begins with a ``packages:`` attribute, followed
-by a list of package names.  To specify externals, add an ``externals:``
-attribute under the package name, which lists externals.
-Each external should specify a ``spec:`` string that should be as
+Each ``packages.yaml`` begins with a ``packages:`` token, followed
+by a list of package names.  To specify externals, add a ``paths`` or ``modules``
+token under the package name, which lists externals in a
+``spec: /path`` or ``spec: module-name`` format.  Each spec should be as
 well-defined as reasonably possible.  If a
 package lacks a spec component, such as missing a compiler or
 package version, then Spack will guess the missing component based
@@ -111,13 +106,10 @@ be:
 
    packages:
      openmpi:
-       externals:
-       - spec: "openmpi@1.4.3%gcc@4.4.7 arch=linux-debian7-x86_64"
-         prefix: /opt/openmpi-1.4.3
-       - spec: "openmpi@1.4.3%gcc@4.4.7 arch=linux-debian7-x86_64+debug"
-         prefix: /opt/openmpi-1.4.3-debug
-       - spec: "openmpi@1.6.5%intel@10.1 arch=linux-debian7-x86_64"
-         prefix: /opt/openmpi-1.6.5-intel
+       paths:
+         openmpi@1.4.3%gcc@4.4.7 arch=linux-debian7-x86_64: /opt/openmpi-1.4.3
+         openmpi@1.4.3%gcc@4.4.7 arch=linux-debian7-x86_64+debug: /opt/openmpi-1.4.3-debug
+         openmpi@1.6.5%intel@10.1 arch=linux-debian7-x86_64: /opt/openmpi-1.6.5-intel
        buildable: False
 
 The addition of the ``buildable`` flag tells Spack that it should never build
@@ -132,82 +124,6 @@ The ``buildable`` does not need to be paired with external packages.
 It could also be used alone to forbid packages that may be
 buggy or otherwise undesirable.
 
-Virtual packages in Spack can also be specified as not buildable, and
-external implementations can be provided. In the example above,
-OpenMPI is configured as not buildable, but Spack will often prefer
-other MPI implementations over the externally available OpenMPI. Spack
-can be configured with every MPI provider not buildable individually,
-but more conveniently:
-
-.. code-block:: yaml
-
-   packages:
-     mpi:
-       buildable: False
-     openmpi:
-       externals:
-       - spec: "openmpi@1.4.3%gcc@4.4.7 arch=linux-debian7-x86_64"
-         prefix: /opt/openmpi-1.4.3
-       - spec: "openmpi@1.4.3%gcc@4.4.7 arch=linux-debian7-x86_64+debug"
-         prefix: /opt/openmpi-1.4.3-debug
-       - spec: "openmpi@1.6.5%intel@10.1 arch=linux-debian7-x86_64"
-         prefix: /opt/openmpi-1.6.5-intel
-
-Implementations can also be listed immediately under the virtual they provide:
-
-.. code-block:: yaml
-
-   packages:
-     mpi:
-       buildable: False
-         openmpi@1.4.3%gcc@4.4.7 arch=linux-debian7-x86_64: /opt/openmpi-1.4.3
-         openmpi@1.4.3%gcc@4.4.7 arch=linux-debian7-x86_64+debug: /opt/openmpi-1.4.3-debug
-         openmpi@1.6.5%intel@10.1 arch=linux-debian7-x86_64: /opt/openmpi-1.6.5-intel
-         mpich@3.3 %clang@9.0.0 arch=linux-debian7-x86_64: /opt/mpich-3.3-intel
-
-Spack can then use any of the listed external implementations of MPI
-to satisfy a dependency, and will choose depending on the compiler and
-architecture.
-
-.. _cmd-spack-external-find:
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Automatically Find External Packages
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-You can run the :ref:`spack external find <spack-external-find>` command
-to search for system-provided packages and add them to ``packages.yaml``.
-After running this command your ``packages.yaml`` may include new entries:
-
-.. code-block:: yaml
-
-   packages:
-     cmake:
-       externals:
-       - spec: cmake@3.17.2
-         prefix: /usr
-
-Generally this is useful for detecting a small set of commonly-used packages;
-for now this is generally limited to finding build-only dependencies.
-Specific limitations include:
-
-* Packages are not discoverable by default: For a package to be
-  discoverable with ``spack external find``, it needs to add special
-  logic. See :ref:`here <make-package-findable>` for more details.
-* The current implementation only collects and examines executable files,
-  so it is typically only useful for build/run dependencies (in some cases
-  if a library package also provides an executable, it may be possible to
-  extract a meaningful Spec by running the executable - for example the
-  compiler wrappers in MPI implementations).
-* The logic does not search through module files, it can only detect
-  packages with executables defined in ``PATH``; you can help Spack locate
-  externals which use module files by loading any associated modules for
-  packages that you want Spack to know about before running
-  ``spack external find``.
-* Spack does not overwrite existing entries in the package configuration:
-  If there is an external defined for a spec at any configuration scope,
-  then Spack will not add a new external entry (``spack config blame packages``
-  can help locate all external entries).
 
 .. _concretization-preferences:
 

lib/spack/docs/build_systems.rst

@@ -29,7 +29,6 @@ on these ideas for each distinct build system that Spack supports:
    :maxdepth: 1
    :caption: Make-incompatible
 
-   build_systems/mavenpackage
    build_systems/sconspackage
    build_systems/wafpackage
 

lib/spack/docs/build_systems/autotoolspackage.rst

@@ -233,124 +233,7 @@ You may have noticed that most of the Autotools flags are of the form
 ``--without-baz``. Since these flags are so common, Spack provides a
 couple of helper functions to make your life easier.
 
-"""""""""""""""""
-enable_or_disable
-"""""""""""""""""
-
-Autotools flags for simple boolean variants can be automatically
-generated by calling the ``enable_or_disable`` method. This is
-typically used to enable or disable some feature within the package.
-
-.. code-block:: python
-
-   variant(
-       'memchecker',
-       default=False,
-       description='Memchecker support for debugging [degrades performance]'
-   )
-   config_args.extend(self.enable_or_disable('memchecker'))
-
-In this example, specifying the variant ``+memchecker`` will generate
-the following configuration options:
-
-.. code-block:: console
-
-   --enable-memchecker
-
-"""""""""""""""
-with_or_without
-"""""""""""""""
-
-Autotools flags for more complex variants, including boolean variants
-and multi-valued variants, can be automatically generated by calling
-the ``with_or_without`` method.
-
-.. code-block:: python
-
-   variant(
-       'schedulers',
-       values=disjoint_sets(
-           ('auto',), ('alps', 'lsf', 'tm', 'slurm', 'sge', 'loadleveler')
-       ).with_non_feature_values('auto', 'none'),
-       description="List of schedulers for which support is enabled; "
-       "'auto' lets openmpi determine",
-   )
-   if 'schedulers=auto' not in spec:
-       config_args.extend(self.with_or_without('schedulers'))
-
-In this example, specifying the variant ``schedulers=slurm,sge`` will
-generate the following configuration options:
-
-.. code-block:: console
-
-   --with-slurm --with-sge
-
-``enable_or_disable`` is actually functionally equivalent with
-``with_or_without``, and accepts the same arguments and variant types;
-but idiomatic autotools packages often follow these naming
-conventions.
-
-""""""""""""""""
-activation_value
-""""""""""""""""
-
-Autotools parameters that require an option can still be automatically
-generated, using the ``activation_value`` argument to
-``with_or_without`` (or, rarely, ``enable_or_disable``).
-
-.. code-block:: python
-
-   variant(
-      'fabrics',
-       values=disjoint_sets(
-           ('auto',), ('psm', 'psm2', 'verbs', 'mxm', 'ucx', 'libfabric')
-       ).with_non_feature_values('auto', 'none'),
-       description="List of fabrics that are enabled; "
-       "'auto' lets openmpi determine",
-   )
-   if 'fabrics=auto' not in spec:
-       config_args.extend(self.with_or_without('fabrics',
-           activation_value='prefix'))
-
-``activation_value`` accepts a callable that generates the configure
-parameter value given the variant value; but the special value
-``prefix`` tells Spack to automatically use the dependenency's
-installation prefix, which is the most common use for such
-parameters. In this example, specifying the variant
-``fabrics=libfabric`` will generate the following configuration
-options:
-
-.. code-block:: console
-
-   --with-libfabric=</path/to/libfabric>
-
-""""""""""""""""""""
-activation overrides
-""""""""""""""""""""
-
-Finally, the behavior of either ``with_or_without`` or
-``enable_or_disable`` can be overridden for specific variant
-values. This is most useful for multi-values variants where some of
-the variant values require atypical behavior.
-
-.. code-block:: python
-
-   def with_or_without_verbs(self, activated):
-       # Up through version 1.6, this option was named --with-openib.
-       # In version 1.7, it was renamed to be --with-verbs.
-       opt = 'verbs' if self.spec.satisfies('@1.7:') else 'openib'
-       if not activated:
-           return '--without-{0}'.format(opt)
-       return '--with-{0}={1}'.format(opt, self.spec['rdma-core'].prefix)
-
-Defining ``with_or_without_verbs`` overrides the behavior of a
-``fabrics=verbs`` variant, changing the configure-time option to
-``--with-openib`` for older versions of the package and specifying an
-alternative dependency name:
-
-.. code-block::
-
-   --with-openib=</path/to/rdma-core>
+TODO: document ``with_or_without`` and ``enable_or_disable``.
 
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 Configure script in a sub-directory

lib/spack/docs/build_systems/cmakepackage.rst

@@ -128,20 +128,17 @@ Adding flags to cmake
 ^^^^^^^^^^^^^^^^^^^^^
 
 To add additional flags to the ``cmake`` call, simply override the
-``cmake_args`` function. The following example defines values for the flags
-``WHATEVER``, ``ENABLE_BROKEN_FEATURE``, ``DETECT_HDF5``, and ``THREADS`` with
-and without the :py:meth:`~.CMakePackage.define` and
-:py:meth:`~.CMakePackage.define_from_variant` helper functions:
+``cmake_args`` function:
 
 .. code-block:: python
 
    def cmake_args(self):
-       args = [
-           '-DWHATEVER:STRING=somevalue',
-           self.define('ENABLE_BROKEN_FEATURE', False),
-           self.define_from_variant('DETECT_HDF5', 'hdf5'),
-           self.define_from_variant('THREADS'), # True if +threads
-       ]
+       args = []
+
+       if '+hdf5' in self.spec:
+           args.append('-DDETECT_HDF5=ON')
+       else:
+           args.append('-DDETECT_HDF5=OFF')
 
        return args
 

lib/spack/docs/build_systems/cudapackage.rst

@@ -37,7 +37,7 @@ In order to use it, just add another base class to your package, for example:
             if '+cuda' in spec:
                 options.append('-DWITH_CUDA=ON')
                 cuda_arch = spec.variants['cuda_arch'].value
-                if cuda_arch != 'none':
+                if cuda_arch is not None:
                     options.append('-DCUDA_FLAGS=-arch=sm_{0}'.format(cuda_arch[0]))
             else:
                 options.append('-DWITH_CUDA=OFF')

lib/spack/docs/build_systems/intelpackage.rst

@@ -418,13 +418,9 @@ Adapt the following example. Be sure to maintain the indentation:
    # other content ...
 
      intel-mkl:
-       externals:
-       - spec: "intel-mkl@2018.2.199  arch=linux-centos6-x86_64"
-         modules:
-         -  intel-mkl/18/18.0.2
-       - spec: "intel-mkl@2018.3.222  arch=linux-centos6-x86_64"
-         modules:
-         -  intel-mkl/18/18.0.3
+       modules:
+         intel-mkl@2018.2.199  arch=linux-centos6-x86_64:  intel-mkl/18/18.0.2
+         intel-mkl@2018.3.222  arch=linux-centos6-x86_64:  intel-mkl/18/18.0.3
 
 The version numbers for the ``intel-mkl`` specs defined here correspond to file
 and directory names that Intel uses for its products because they were adopted
@@ -455,16 +451,12 @@ mechanism.
 
    packages:
      intel-parallel-studio:
-       externals:
-       - spec: "intel-parallel-studio@cluster.2018.2.199 +mkl+mpi+ipp+tbb+daal  arch=linux-centos6-x86_64"
-         modules:
-         -  intel/18/18.0.2
-       - spec: "intel-parallel-studio@cluster.2018.3.222 +mkl+mpi+ipp+tbb+daal  arch=linux-centos6-x86_64"
-         modules:
-         -  intel/18/18.0.3
+       modules:
+         intel-parallel-studio@cluster.2018.2.199 +mkl+mpi+ipp+tbb+daal  arch=linux-centos6-x86_64:  intel/18/18.0.2
+         intel-parallel-studio@cluster.2018.3.222 +mkl+mpi+ipp+tbb+daal  arch=linux-centos6-x86_64:  intel/18/18.0.3
        buildable: False
 
-One additional example illustrates the use of ``prefix:`` instead of
+One additional example illustrates the use of ``paths:`` instead of
 ``modules:``, useful when external modulefiles are not available or not
 suitable:
 
@@ -472,15 +464,13 @@ suitable:
 
    packages:
      intel-parallel-studio:
-       externals:
-       - spec: "intel-parallel-studio@cluster.2018.2.199 +mkl+mpi+ipp+tbb+daal"
-         prefix: /opt/intel
-       - spec: "intel-parallel-studio@cluster.2018.3.222 +mkl+mpi+ipp+tbb+daal"
-         prefix: /opt/intel
+       paths:
+         intel-parallel-studio@cluster.2018.2.199 +mkl+mpi+ipp+tbb+daal: /opt/intel
+         intel-parallel-studio@cluster.2018.3.222 +mkl+mpi+ipp+tbb+daal: /opt/intel
        buildable: False
 
 Note that for the Intel packages discussed here, the directory values in the
-``prefix:`` entries must be the high-level and typically version-less
+``paths:`` entries must be the high-level and typically version-less
 "installation directory" that has been used by Intel's product installer.
 Such a directory will typically accumulate various product versions.  Amongst
 them, Spack will select the correct version-specific product directory based on
@@ -563,7 +553,7 @@ follow `the next section <intel-install-libs_>`_ instead.
                f77:      stub
                fc:       stub
 
-      Replace ``18.0.3`` with the version that you determined in the preceding
+      Replace ``18.0.3`` with the version that you determined in the preceeding
       step. The contents under ``paths:`` do not matter yet.
 
    You are right to ask: "Why on earth is that necessary?" [fn8]_.
@@ -706,7 +696,7 @@ follow `the next section <intel-install-libs_>`_ instead.
              - /home/$user/spack-stage
 
         Do not duplicate the ``config:`` line if it already is present.
-        Adapt the location, which here is the same as in the preceding example.
+        Adapt the location, which here is the same as in the preceeding example.
 
    3. Retry installing the large package.
 
@@ -975,7 +965,7 @@ a *virtual* ``mkl`` package is declared in Spack.
 
   Likewise, in a
   :ref:`MakefilePackage <makefilepackage>`
-  or similar package that does not use AutoTools you may need to provide include
+  or similiar package that does not use AutoTools you may need to provide include
   and link options for use on command lines or in environment variables.
   For example, to generate an option string of the form ``-I<dir>``, use:
 
@@ -1065,6 +1055,6 @@ Footnotes
    2. Set the hash length in ``install-path-scheme``, also in ``config.yaml``
       (:ref:`q.v. <config-yaml>`).
    3. You will want to set the *same* hash length for
-      :ref:`module files <modules-projections>`
-      if you have Spack produce them for you, under ``projections`` in
-      ``modules.yaml``.
+      :ref:`tcl module files <modules-naming-scheme>`
+      if you have Spack produce them for you, under ``naming_scheme`` in
+      ``modules.yaml``.  Other module dialects cannot be altered in this manner.

lib/spack/docs/build_systems/mavenpackage.rst

@@ -1,102 +0,0 @@
-.. Copyright 2013-2020 Lawrence Livermore National Security, LLC and other
-   Spack Project Developers. See the top-level COPYRIGHT file for details.
-
-   SPDX-License-Identifier: (Apache-2.0 OR MIT)
-
-.. _mavenpackage:
-
-------------
-MavenPackage
-------------
-
-Apache Maven is a general-purpose build system that does not rely
-on Makefiles to build software. It is designed for building and
-managing and Java-based project.
-
-^^^^^^
-Phases
-^^^^^^
-
-The ``MavenPackage`` base class comes with the following phases:
-
-#. ``build`` - compile code and package into a JAR file
-#. ``install`` - copy to installation prefix
-
-By default, these phases run:
-
-.. code-block:: console
-
-   $ mvn package
-   $ install . <prefix>
-
-
-^^^^^^^^^^^^^^^
-Important files
-^^^^^^^^^^^^^^^
-
-Maven packages can be identified by the presence of a ``pom.xml`` file.
-This file lists dependencies and other metadata about the project.
-There may also be configuration files in the ``.mvn`` directory.
-
-^^^^^^^^^^^^^^^^^^^^^^^^^
-Build system dependencies
-^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Maven requires the ``mvn`` executable to build the project. It also
-requires Java at both build- and run-time. Because of this, the base
-class automatically adds the following dependencies:
-
-.. code-block:: python
-
-   depends_on('java', type=('build', 'run'))
-   depends_on('maven', type='build')
-
-
-In the ``pom.xml`` file, you may see sections like:
-
-.. code-block:: xml
-
-   <requireJavaVersion>
-      <version>[1.7,)</version>
-   </requireJavaVersion>
-   <requireMavenVersion>
-      <version>[3.5.4,)</version>
-   </requireMavenVersion>
-
-
-This specifies the versions of Java and Maven that are required to
-build the package. See
-https://docs.oracle.com/middleware/1212/core/MAVEN/maven_version.htm#MAVEN402
-for a description of this version range syntax. In this case, you
-should add:
-
-.. code-block:: python
-
-   depends_on('java@7:', type='build')
-   depends_on('maven@3.5.4:', type='build')
-
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Passing arguments to the build phase
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-The default build and install phases should be sufficient to install
-most packages. However, you may want to pass additional flags to
-the build phase. For example:
-
-.. code-block:: python
-
-   def build_args(self):
-       return [
-           '-Pdist,native',
-           '-Dtar',
-           '-Dmaven.javadoc.skip=true'
-       ]
-
-
-^^^^^^^^^^^^^^^^^^^^^^
-External documentation
-^^^^^^^^^^^^^^^^^^^^^^
-
-For more information on the Maven build system, see:
-https://maven.apache.org/index.html

lib/spack/docs/build_systems/pythonpackage.rst

@@ -81,24 +81,6 @@ you'll need to define a function for it like so:
        self.setup_py('configure')
 
 
-^^^^^^
-Wheels
-^^^^^^
-
-Some Python packages are closed-source and distributed as wheels.
-Instead of using the ``PythonPackage`` base class, you should extend
-the ``Package`` base class and implement the following custom installation
-procedure:
-
-.. code-block::
-
-   def install(self, spec, prefix):
-       pip = which('pip')
-       pip('install', self.stage.archive_file, '--prefix={0}'.format(prefix))
-
-
-This will require a dependency on pip, as mentioned below.
-
 ^^^^^^^^^^^^^^^
 Important files
 ^^^^^^^^^^^^^^^
@@ -113,27 +95,6 @@ file should be considered to be the truth. As dependencies are added or
 removed, the documentation is much more likely to become outdated than
 the ``setup.py``.
 
-The Python ecosystem has evolved significantly over the years. Before
-setuptools became popular, most packages listed their dependencies in a
-``requirements.txt`` file. Once setuptools took over, these dependencies
-were listed directly in the ``setup.py``. Newer PEPs introduced additional
-files, like ``setup.cfg`` and ``pyproject.toml``. You should look out for
-all of these files, as they may all contain important information about
-package dependencies.
-
-Some Python packages are closed-source and are distributed as Python
-wheels. For example, ``py-azureml-sdk`` downloads a ``.whl`` file. This
-file is simply a zip file, and can be extracted using:
-
-.. code-block:: console
-
-   $ unzip *.whl
-
-
-The zip file will not contain a ``setup.py``, but it will contain a
-``METADATA`` file which contains all the information you need to
-write a ``package.py`` build recipe.
-
 ^^^^^^^^^^^^^^^^^^^^^^^
 Finding Python packages
 ^^^^^^^^^^^^^^^^^^^^^^^
@@ -144,9 +105,8 @@ it the only option for developers who want a simple installation.
 Search for "PyPI <package-name>" to find the download page. Note that
 some pages are versioned, and the first result may not be the newest
 version. Click on the "Latest Version" button to the top right to see
-if a newer version is available. The download page is usually at::
-
-   https://pypi.org/project/<package-name>
+if a newer version is available. The download page is usually at:
+https://pypi.org/project/<package-name>
 
 ^^^^^^^^^^^
 Description
@@ -191,67 +151,39 @@ replacing this with the requested version. Obviously, if Spack cannot
 guess the version correctly, or if non-version-related things change
 in the URL, Spack cannot substitute the version properly.
 
-Once upon a time, PyPI offered nice, simple download URLs like::
-
-   https://pypi.python.org/packages/source/n/numpy/numpy-1.13.1.zip
-
+Once upon a time, PyPI offered nice, simple download URLs like:
+https://pypi.python.org/packages/source/n/numpy/numpy-1.13.1.zip
 
 As you can see, the version is 1.13.1. It probably isn't hard to guess
 what URL to use to download version 1.12.0, and Spack was perfectly
 capable of performing this calculation.
 
-However, PyPI switched to a new download URL format::
-
-   https://pypi.python.org/packages/c0/3a/40967d9f5675fbb097ffec170f59c2ba19fc96373e73ad47c2cae9a30aed/numpy-1.13.1.zip#md5=2c3c0f4edf720c3a7b525dacc825b9ae
-
-
-and more recently::
-
-   https://files.pythonhosted.org/packages/b0/2b/497c2bb7c660b2606d4a96e2035e92554429e139c6c71cdff67af66b58d2/numpy-1.14.3.zip
+However, PyPI switched to a new download URL format:
+https://pypi.python.org/packages/c0/3a/40967d9f5675fbb097ffec170f59c2ba19fc96373e73ad47c2cae9a30aed/numpy-1.13.1.zip#md5=2c3c0f4edf720c3a7b525dacc825b9ae
 
+and more recently:
+https://files.pythonhosted.org/packages/b0/2b/497c2bb7c660b2606d4a96e2035e92554429e139c6c71cdff67af66b58d2/numpy-1.14.3.zip
 
 As you can imagine, it is impossible for Spack to guess what URL to
 use to download version 1.12.0 given this URL. There is a solution,
 however. PyPI offers a new hidden interface for downloading
-Python packages that does not include a hash in the URL::
+Python packages that does not include a hash in the URL:
+https://pypi.io/packages/source/n/numpy/numpy-1.13.1.zip
 
-   https://pypi.io/packages/source/n/numpy/numpy-1.13.1.zip
-
-
-This URL redirects to the https://files.pythonhosted.org URL. The general
-syntax for this https://pypi.io URL is::
-
-   https://pypi.io/packages/<type>/<first-letter-of-name>/<name>/<name>-<version>.<extension>
-
-
-Please use the https://pypi.io URL instead of the https://pypi.python.org
-URL. If both ``.tar.gz`` and ``.zip`` versions are available, ``.tar.gz``
-is preferred. If some releases offer both ``.tar.gz`` and ``.zip`` versions,
-but some only offer ``.zip`` versions, use ``.zip``.
-
-Some Python packages are closed-source and do not ship ``.tar.gz`` or ``.zip``
-files on either PyPI or GitHub. If this is the case, you can still download
-and install a Python wheel. For example, ``py-azureml-sdk`` is closed source
-and can be downloaded from::
-
-   https://pypi.io/packages/py3/a/azureml_sdk/azureml_sdk-1.11.0-py3-none-any.whl
-
-
-Note that instead of ``<type>`` being ``source``, it is now ``py3`` since this
-wheel will work for any generic version of Python 3. You may see Python-specific
-or OS-specific URLs. Note that when you add a ``.whl`` URL, you should add
-``expand=False`` to ensure that Spack doesn't try to extract the wheel:
-
-.. code-block:: python
-
-   version('1.11.0', sha256='d8c9d24ea90457214d798b0d922489863dad518adde3638e08ef62de28fb183a', expand=False)
+This URL redirects to the files.pythonhosted.org URL. The general syntax for
+this pypi.io URL is:
+https://pypi.io/packages/source/<first-letter-of-name>/<name>/<name>-<version>.<extension>
 
+Please use the pypi.io URL instead of the pypi.python.org URL. If both
+``.tar.gz`` and ``.zip`` versions are available, ``.tar.gz`` is preferred.
+If some releases offer both ``.tar.gz`` and ``.zip`` versions, but some
+only offer ``.zip`` versions, use ``.zip``.
 
 """""""""""""""
 PyPI vs. GitHub
 """""""""""""""
 
-Many packages are hosted on PyPI, but are developed on GitHub or another
+Many packages are hosted on PyPI, but are developed on GitHub and other
 version control systems. The tarball can be downloaded from either
 location, but PyPI is preferred for the following reasons:
 
@@ -294,7 +226,7 @@ location, but PyPI is preferred for the following reasons:
 
 There are some reasons to prefer downloading from GitHub:
 
-#. The GitHub tarball may contain unit tests.
+#. The GitHub tarball may contain unit tests
 
    As previously mentioned, the PyPI tarball contains the bare minimum
    of files to install the package. Unless explicitly specified by the
@@ -302,6 +234,12 @@ There are some reasons to prefer downloading from GitHub:
    If you desire to run the unit tests during installation, you should
    use the GitHub tarball instead.
 
+#. Spack does not yet support ``spack versions`` and ``spack checksum``
+   with PyPI URLs
+
+   These commands work just fine with GitHub URLs. This is a minor
+   annoyance, not a reason to prefer GitHub over PyPI.
+
 If you really want to run these unit tests, no one will stop you from
 submitting a PR for a new package that downloads from GitHub.
 
@@ -324,26 +262,26 @@ mentions that Python 3 is required, this can be specified as:
 
 .. code-block:: python
 
-   depends_on('python@3:', type=('build', 'run'))
+   depends_on('python@3:', type=('build', 'run')
 
 
 If Python 2 is required, this would look like:
 
 .. code-block:: python
 
-   depends_on('python@:2', type=('build', 'run'))
+   depends_on('python@:2', type=('build', 'run')
 
 
 If Python 2.7 is the only version that works, you can use:
 
 .. code-block:: python
 
-   depends_on('python@2.7:2.8', type=('build', 'run'))
+   depends_on('python@2.7:2.8', type=('build', 'run')
 
 
 The documentation may not always specify supported Python versions.
-Another place to check is in the ``setup.py`` or ``setup.cfg`` file.
-Look for a line containing ``python_requires``. An example from
+Another place to check is in the ``setup.py`` file. Look for a line
+containing ``python_requires``. An example from
 `py-numpy <https://github.com/spack/spack/blob/develop/var/spack/repos/builtin/packages/py-numpy/package.py>`_
 looks like:
 
@@ -352,7 +290,7 @@ looks like:
    python_requires='>=2.7,!=3.0.*,!=3.1.*,!=3.2.*,!=3.3.*'
 
 
-You may also find a version check at the top of the ``setup.py``:
+More commonly, you will find a version check at the top of the file:
 
 .. code-block:: python
 
@@ -367,39 +305,6 @@ This can be converted to Spack's spec notation like so:
    depends_on('python@2.7:2.8,3.4:', type=('build', 'run'))
 
 
-If you are writing a recipe for a package that only distributes
-wheels, look for a section in the ``METADATA`` file that looks like::
-
-   Requires-Python: >=3.5,<4
-
-
-This would be translated to:
-
-.. code-block:: python
-
-   extends('python')
-   depends_on('python@3.5:3.999', type=('build', 'run'))
-
-
-Many ``setup.py`` or ``setup.cfg`` files also contain information like::
-
-   Programming Language :: Python :: 2
-   Programming Language :: Python :: 2.6
-   Programming Language :: Python :: 2.7
-   Programming Language :: Python :: 3
-   Programming Language :: Python :: 3.3
-   Programming Language :: Python :: 3.4
-   Programming Language :: Python :: 3.5
-   Programming Language :: Python :: 3.6
-
-
-This is a list of versions of Python that the developer likely tests.
-However, you should not use this to restrict the versions of Python
-the package uses unless one of the two former methods (``python_requires``
-or ``sys.version_info``) is used. There is no logic in setuptools
-that prevents the package from building for Python versions not in
-this list, and often new releases like Python 3.7 or 3.8 work just fine.
-
 """"""""""
 setuptools
 """"""""""
@@ -412,7 +317,7 @@ Most notably, there was no way to list a project's dependencies
 with distutils. Along came setuptools, a non-builtin build system
 designed to overcome the limitations of distutils. Both projects
 use a similar API, making the transition easy while adding much
-needed functionality. Today, setuptools is used in around 90% of
+needed functionality. Today, setuptools is used in around 75% of
 the Python packages in Spack.
 
 Since setuptools isn't built-in to Python, you need to add it as a
@@ -455,20 +360,6 @@ run-time. This can be specified as:
    depends_on('py-setuptools', type='build')
 
 
-"""
-pip
-"""
-
-Packages distributed as Python wheels will require an extra dependency
-on pip:
-
-.. code-block:: python
-
-   depends_on('py-pip', type='build')
-
-
-We will use pip to install the actual wheel.
-
 """"""
 cython
 """"""
@@ -492,12 +383,6 @@ where speed is crucial. There is no reason why someone would not
 want an optimized version of a library instead of the pure-Python
 version.
 
-Note that some release tarballs come pre-cythonized, and cython is
-not needed as a dependency. However, this is becoming less common
-as Python continues to evolve and developers discover that cythonized
-sources are no longer compatible with newer versions of Python and
-need to be re-cythonized.
-
 ^^^^^^^^^^^^^^^^^^^
 Python dependencies
 ^^^^^^^^^^^^^^^^^^^
@@ -544,26 +429,15 @@ Obviously, this means that ``py-numpy`` is a dependency.
 
 If the package uses ``setuptools``, check for the following clues:
 
-* ``python_requires``
-
-  As mentioned above, this specifies which versions of Python are
-  required.
-
-* ``setup_requires``
-
-  These packages are usually only needed at build-time, so you can
-  add them with ``type='build'``.
-
 * ``install_requires``
 
-  These packages are required for building and installation. You can
-  add them with ``type=('build', 'run')``.
+  These packages are required for installation.
 
 * ``extra_requires``
 
   These packages are optional dependencies that enable additional
   functionality. You should add a variant that optionally adds these
-  dependencies. This variant should be False by default.
+  dependencies.
 
 * ``test_requires``
 
@@ -587,37 +461,13 @@ sphinx. If you can't find any information about the package's
 dependencies, you can take a look in ``requirements.txt``, but be sure
 not to add test or documentation dependencies.
 
-Newer PEPs have added alternative ways to specify a package's dependencies.
-If you don't see any dependencies listed in the ``setup.py``, look for a
-``setup.cfg`` or ``pyproject.toml``. These files can be used to store the
-same ``install_requires`` information that ``setup.py`` used to use.
-
-If you are write a recipe for a package that only distributes wheels,
-check the ``METADATA`` file for lines like::
-
-   Requires-Dist: azureml-core (~=1.11.0)
-   Requires-Dist: azureml-dataset-runtime[fuse] (~=1.11.0)
-   Requires-Dist: azureml-train (~=1.11.0)
-   Requires-Dist: azureml-train-automl-client (~=1.11.0)
-   Requires-Dist: azureml-pipeline (~=1.11.0)
-   Provides-Extra: accel-models
-   Requires-Dist: azureml-accel-models (~=1.11.0); extra == 'accel-models'
-   Provides-Extra: automl
-   Requires-Dist: azureml-train-automl (~=1.11.0); extra == 'automl'
-
-
-Lines that use ``Requires-Dist`` are similar to ``install_requires``.
-Lines that use ``Provides-Extra`` are similar to ``extra_requires``,
-and you can add a variant for those dependencies. The ``~=1.11.0``
-syntax is equivalent to ``1.11.0:1.11.999``.
-
 """"""""""
 setuptools
 """"""""""
 
 Setuptools is a bit of a special case. If a package requires setuptools
 at run-time, how do they express this? They could add it to
-``install_requires``, but setuptools is imported long before this and is
+``install_requires``, but setuptools is imported long before this and
 needed to read this line. And since you can't install the package
 without setuptools, the developers assume that setuptools will already
 be there, so they never mention when it is required. We don't want to
@@ -730,13 +580,11 @@ By default, Spack runs:
 
 if it detects that the ``setup.py`` file supports a ``test`` phase.
 You can add additional build-time or install-time tests by overriding
-``test`` or adding a custom install-time test function. For example,
-``py-numpy`` adds:
+``test`` and ``installtest``, respectively. For example, ``py-numpy``
+adds:
 
 .. code-block:: python
 
-   install_time_test_callbacks = ['install_test', 'import_module_test']
-
    def install_test(self):
         with working_dir('..'):
             python('-c', 'import numpy; numpy.test("full", verbose=2)')
@@ -803,8 +651,6 @@ that the package uses the ``PythonPackage`` build system. However, there
 are occasionally packages that use ``PythonPackage`` that shouldn't
 start with ``py-``. For example:
 
-* awscli
-* aws-parallelcluster
 * busco
 * easybuild
 * httpie
@@ -890,9 +736,8 @@ non-Python dependencies. Anaconda contains many Python packages that
 are not yet in Spack, and Spack contains many Python packages that are
 not yet in Anaconda. The main advantage of Spack over Anaconda is its
 ability to choose a specific compiler and BLAS/LAPACK or MPI library.
-Spack also has better platform support for supercomputers, and can build
-optimized binaries for your specific microarchitecture. On the other hand,
-Anaconda offers Windows support.
+Spack also has better platform support for supercomputers. On the
+other hand, Anaconda offers Windows support.
 
 ^^^^^^^^^^^^^^^^^^^^^^
 External documentation

lib/spack/docs/build_systems/rubypackage.rst

@@ -12,173 +12,5 @@ RubyPackage
 Like Perl, Python, and R, Ruby has its own build system for
 installing Ruby gems.
 
-^^^^^^
-Phases
-^^^^^^
-
-The ``RubyPackage`` base class provides the following phases that
-can be overridden:
-
-#. ``build`` - build everything needed to install
-#. ``install`` - install everything from build directory
-
-For packages that come with a ``*.gemspec`` file, these phases run:
-
-.. code-block:: console
-
-   $ gem build *.gemspec
-   $ gem install *.gem
-
-
-For packages that come with a ``Rakefile`` file, these phases run:
-
-.. code-block:: console
-
-   $ rake package
-   $ gem install *.gem
-
-
-For packages that come pre-packaged as a ``*.gem`` file, the build
-phase is skipped and the install phase runs:
-
-.. code-block:: console
-
-   $ gem install *.gem
-
-
-These are all standard ``gem`` commands and can be found by running:
-
-.. code-block:: console
-
-   $ gem help commands
-
-
-For packages that only distribute ``*.gem`` files, these files can be
-downloaded with the ``expand=False`` option in the ``version`` directive.
-The build phase will be automatically skipped.
-
-^^^^^^^^^^^^^^^
-Important files
-^^^^^^^^^^^^^^^
-
-When building from source, Ruby packages can be identified by the
-presence of any of the following files:
-
-* ``*.gemspec``
-* ``Rakefile``
-* ``setup.rb`` (not yet supported)
-
-However, not all Ruby packages are released as source code. Some are only
-released as ``*.gem`` files. These files can be extracted using:
-
-.. code-block:: console
-
-   $ gem unpack *.gem
-
-
-^^^^^^^^^^^
-Description
-^^^^^^^^^^^
-
-The ``*.gemspec`` file may contain something like:
-
-.. code-block:: ruby
-
-   summary = 'An implementation of the AsciiDoc text processor and publishing toolchain'
-   description = 'A fast, open source text processor and publishing toolchain for converting AsciiDoc content to HTML 5, DocBook 5, and other formats.'
-
-
-Either of these can be used for the description of the Spack package.
-
-^^^^^^^^
-Homepage
-^^^^^^^^
-
-The ``*.gemspec`` file may contain something like:
-
-.. code-block:: ruby
-
-   homepage = 'https://asciidoctor.org'
-
-
-This should be used as the official homepage of the Spack package.
-
-^^^^^^^^^^^^^^^^^^^^^^^^^
-Build system dependencies
-^^^^^^^^^^^^^^^^^^^^^^^^^
-
-All Ruby packages require Ruby at build and run-time. For this reason,
-the base class contains:
-
-.. code-block:: python
-
-   extends('ruby')
-   depends_on('ruby', type=('build', 'run'))
-
-
-The ``*.gemspec`` file may contain something like:
-
-.. code-block:: ruby
-
-   required_ruby_version = '>= 2.3.0'
-
-
-This can be added to the Spack package using:
-
-.. code-block:: python
-
-   depends_on('ruby@2.3.0:', type=('build', 'run'))
-
-
-^^^^^^^^^^^^^^^^^
-Ruby dependencies
-^^^^^^^^^^^^^^^^^
-
-When you install a package with ``gem``, it reads the ``*.gemspec``
-file in order to determine the dependencies of the package.
-If the dependencies are not yet installed, ``gem`` downloads them
-and installs them for you. This may sound convenient, but Spack
-cannot rely on this behavior for two reasons:
-
-#. Spack needs to be able to install packages on air-gapped networks.
-
-   If there is no internet connection, ``gem`` can't download the
-   package dependencies. By explicitly listing every dependency in
-   the ``package.py``, Spack knows what to download ahead of time.
-
-#. Duplicate installations of the same dependency may occur.
-
-   Spack supports *activation* of Ruby extensions, which involves
-   symlinking the package installation prefix to the Ruby installation
-   prefix. If your package is missing a dependency, that dependency
-   will be installed to the installation directory of the same package.
-   If you try to activate the package + dependency, it may cause a
-   problem if that package has already been activated.
-
-For these reasons, you must always explicitly list all dependencies.
-Although the documentation may list the package's dependencies,
-often the developers assume people will use ``gem`` and won't have to
-worry about it. Always check the ``*.gemspec`` file to find the true
-dependencies.
-
-Check for the following clues in the ``*.gemspec`` file:
-
-* ``add_runtime_dependency``
-
-  These packages are required for installation.
-
-* ``add_dependency``
-
-  This is an alias for ``add_runtime_dependency``
-
-* ``add_development_dependency``
-
-  These packages are optional dependencies used for development.
-  They should not be added as dependencies of the package.
-
-^^^^^^^^^^^^^^^^^^^^^^
-External documentation
-^^^^^^^^^^^^^^^^^^^^^^
-
-For more information on Ruby packaging, see:
-https://guides.rubygems.org/
+This build system is a work-in-progress. See
+https://github.com/spack/spack/pull/3127 for more information.

lib/spack/docs/build_systems/sippackage.rst

@@ -51,8 +51,10 @@ Build system dependencies
 ``SIPPackage`` requires several dependencies. Python is needed to run
 the ``configure.py`` build script, and to run the resulting Python
 libraries. Qt is needed to provide the ``qmake`` command. SIP is also
-needed to build the package. All of these dependencies are automatically
-added via the base class
+needed to build the package. SIP is an unusual dependency in that it
+must be installed in the same installation directory as the package,
+so instead of a ``depends_on``, we use a ``resource``. All of these
+dependencies are automatically added via the base class
 
 .. code-block:: python
 
@@ -60,7 +62,11 @@ added via the base class
 
    depends_on('qt', type='build')
 
-   depends_on('py-sip', type='build')
+   resource(name='sip',
+            url='https://www.riverbankcomputing.com/static/Downloads/sip/4.19.18/sip-4.19.18.tar.gz',
+            sha256='c0bd863800ed9b15dcad477c4017cdb73fa805c25908b0240564add74d697e1e',
+            destination='.')
+
 
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 Passing arguments to ``configure.py``

lib/spack/docs/build_systems/wafpackage.rst

@@ -47,9 +47,8 @@ Each phase provides a ``<phase>`` function that runs:
 
 where ``<jobs>`` is the number of parallel jobs to build with. Each phase
 also has a ``<phase_args>`` function that can pass arguments to this call.
-All of these functions are empty. The ``configure`` phase
-automatically adds  ``--prefix=/path/to/installation/prefix``, so you
-don't need to add that in the ``configure_args``.
+All of these functions are empty except for the ``configure_args``
+function, which passes ``--prefix=/path/to/installation/prefix``.
 
 ^^^^^^^
 Testing

lib/spack/docs/config_yaml.rst

@@ -99,7 +99,7 @@ username is not already in the path, Spack will append the value of ``$user`` to
 the selected ``build_stage`` path.
 
 .. warning:: We highly recommend specifying ``build_stage`` paths that
-   distinguish between staging and other activities to ensure
+   distinguish between staging and other activities to ensure 
    ``spack clean`` does not inadvertently remove unrelated files.
    Spack prepends ``spack-stage-`` to temporary staging directory names to
    reduce this risk.  Using a combination of ``spack`` and or ``stage`` in
@@ -223,7 +223,7 @@ To build all software in serial, set ``build_jobs`` to 1.
 --------------------
 
 When set to ``true`` Spack will use ccache to cache compiles. This is
-useful specifically in two cases: (1) when using ``spack dev-build``, and (2)
+useful specifically in two cases: (1) when using ``spack setup``, and (2)
 when building the same package with many different variants. The default is
 ``false``.
 

lib/spack/docs/containers.rst

@@ -9,48 +9,28 @@
 Container Images
 ================
 
-Spack :ref:`environments` are a great tool to create container images, but
-preparing one that is suitable for production requires some more boilerplate
-than just:
+Spack can be an ideal tool to setup images for containers since all the
+features discussed in :ref:`environments` can greatly help to manage
+the installation of software during the image build process. Nonetheless,
+building a production image from scratch still requires a lot of
+boilerplate to:
 
-.. code-block:: docker
+- Get Spack working within the image, possibly running as root
+- Minimize the physical size of the software installed
+- Properly update the system software in the base image
 
-   COPY spack.yaml /environment
-   RUN spack -e /environment install
-
-Additional actions may be needed to minimize the size of the
-container, or to update the system software that is installed in the base
-image, or to set up a proper entrypoint to run the image. These tasks are
-usually both necessary and repetitive, so Spack comes with a command
-to generate recipes for container images starting from a ``spack.yaml``.
-
---------------------
-A Quick Introduction
---------------------
-
-Consider having a Spack environment like the following:
-
-.. code-block:: yaml
-
-   spack:
-     specs:
-     - gromacs+mpi
-     - mpich
-
-Producing a ``Dockerfile`` from it is as simple as moving to the directory
-where the ``spack.yaml`` file is stored and giving the following command:
+To facilitate users with these tedious tasks, Spack provides a command
+to automatically generate recipes for container images based on
+Environments:
 
 .. code-block:: console
 
-   $ spack containerize > Dockerfile
-
-The ``Dockerfile`` that gets created uses multi-stage builds and
-other techniques to minimize the size of the final image:
-
-.. code-block:: docker
+   $ ls
+   spack.yaml
 
+   $ spack containerize
    # Build stage with Spack pre-installed and ready to be used
-   FROM spack/ubuntu-bionic:latest as builder
+   FROM spack/centos7:latest as builder
 
    # What we want to install and how we want to install it
    # is specified in a manifest file (spack.yaml)
@@ -64,8 +44,8 @@ other techniques to minimize the size of the final image:
    &&   echo "    install_tree: /opt/software" \
    &&   echo "  view: /opt/view") > /opt/spack-environment/spack.yaml
 
-   # Install the software, remove unnecessary deps
-   RUN cd /opt/spack-environment && spack env activate . && spack install --fail-fast && spack gc -y
+   # Install the software, remove unecessary deps
+   RUN cd /opt/spack-environment && spack install && spack gc -y
 
    # Strip all the binaries
    RUN find -L /opt/view/* -type f -exec readlink -f '{}' \; | \
@@ -78,34 +58,38 @@ other techniques to minimize the size of the final image:
    RUN cd /opt/spack-environment && \
        spack env activate --sh -d . >> /etc/profile.d/z10_spack_environment.sh
 
+
    # Bare OS image to run the installed executables
-   FROM ubuntu:18.04
+   FROM centos:7
 
    COPY --from=builder /opt/spack-environment /opt/spack-environment
    COPY --from=builder /opt/software /opt/software
    COPY --from=builder /opt/view /opt/view
    COPY --from=builder /etc/profile.d/z10_spack_environment.sh /etc/profile.d/z10_spack_environment.sh
 
+   RUN yum update -y && yum install -y epel-release && yum update -y                                   \
+    && yum install -y libgomp \
+    && rm -rf /var/cache/yum  && yum clean all
+
+   RUN echo 'export PS1="\[$(tput bold)\]\[$(tput setaf 1)\][gromacs]\[$(tput setaf 2)\]\u\[$(tput sgr0)\]:\w $ \[$(tput sgr0)\]"' >> ~/.bashrc
+
+
+   LABEL "app"="gromacs"
+   LABEL "mpi"="mpich"
+
    ENTRYPOINT ["/bin/bash", "--rcfile", "/etc/profile", "-l"]
 
-The image itself can then be built and run in the usual way, with any of the
-tools suitable for the task. For instance, if we decided to use ``docker``:
 
-.. code-block:: bash
+The bits that make this automation possible are discussed in details
+below. All the images generated in this way will be based on
+multi-stage builds with:
 
-   $ spack containerize > Dockerfile
-   $ docker build -t myimage .
-   [ ... ]
-   $ docker run -it myimage
+- A fat ``build`` stage containing common build tools and Spack itself
+- A minimal ``final`` stage containing only the software requested by the user
 
-The various components involved in the generation of the recipe and their
-configuration are discussed in details in the sections below.
-
-.. _container_spack_images:
-
---------------------------
-Spack Images on Docker Hub
---------------------------
+-----------------
+Spack Base Images
+-----------------
 
 Docker images with Spack preinstalled and ready to be used are
 built on `Docker Hub <https://hub.docker.com/u/spack>`_
@@ -124,7 +108,7 @@ are currently supported are summarized in the table below:
      - ``ubuntu:16.04``
      - ``spack/ubuntu-xenial``
    * - Ubuntu 18.04
-     - ``ubuntu:18.04``
+     - ``ubuntu:16.04``
      - ``spack/ubuntu-bionic``
    * - CentOS 6
      - ``centos:6``
@@ -140,20 +124,19 @@ All the images are tagged with the corresponding release of Spack:
 with the exception of the ``latest`` tag that points to the HEAD
 of the ``develop`` branch. These images are available for anyone
 to use and take care of all the repetitive tasks that are necessary
-to setup Spack within a container. The container recipes generated
-by Spack use them as default base images for their ``build`` stage,
-even though handles to use custom base images provided by users are
-available to accommodate complex use cases.
+to setup Spack within a container. All the container recipes generated
+automatically by Spack use them as base images for their ``build`` stage.
 
----------------------------------
-Creating Images From Environments
----------------------------------
+
+-------------------------
+Environment Configuration
+-------------------------
 
 Any Spack Environment can be used for the automatic generation of container
 recipes. Sensible defaults are provided for things like the base image or the
-version of Spack used in the image.
-If a finer tuning is needed it can be obtained by adding the relevant metadata
-under the ``container`` attribute of environments:
+version of Spack used in the image. If a finer tuning is needed it can be
+obtained by adding the relevant metadata under the ``container`` attribute
+of environments:
 
 .. code-block:: yaml
 
@@ -167,10 +150,9 @@ under the ``container`` attribute of environments:
        # singularity or anything else that is currently supported
        format: docker
 
-       # Sets the base images for the stages where Spack builds the
-       # software or where the software gets installed after being built..
-       images:
-         os: "centos:7"
+       # Select from a valid list of images
+       base:
+         image: "centos:7"
          spack: develop
 
        # Whether or not to strip binaries
@@ -178,223 +160,19 @@ under the ``container`` attribute of environments:
 
        # Additional system packages that are needed at runtime
        os_packages:
-         final:
-         - libgomp
+       - libgomp
 
        # Extra instructions
        extra_instructions:
          final: |
-           RUN echo 'export PS1="\[$(tput bold)\]\[$(tput setaf 1)\][gromacs]\[$(tput setaf 2)\]\u\[$(tput sgr0)\]:\w $ "' >> ~/.bashrc
+   RUN echo 'export PS1="\[$(tput bold)\]\[$(tput setaf 1)\][gromacs]\[$(tput setaf 2)\]\u\[$(tput sgr0)\]:\w $ \[$(tput sgr0)\]"' >> ~/.bashrc
 
        # Labels for the image
        labels:
          app: "gromacs"
          mpi: "mpich"
 
-A detailed description of the options available can be found in the
-:ref:`container_config_options` section.
-
--------------------
-Setting Base Images
--------------------
-
-The ``images`` subsection is used to select both the image where
-Spack builds the software and the image where the built software
-is installed. This attribute can be set in two different ways and
-which one to use depends on the use case at hand.
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Use Official Spack Images From Dockerhub
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-To generate a recipe that uses an official Docker image from the
-Spack organization to build the software and the corresponding official OS image
-to install the built software, all the user has to do is specify:
-
-1. An operating system under ``images:os``
-2. A Spack version under ``images:spack``
-
-Any combination of these two values that can be mapped to one of the images
-discussed in :ref:`container_spack_images` is allowed. For instance, the
-following ``spack.yaml``:
-
-.. code-block:: yaml
-
-   spack:
-     specs:
-     - gromacs+mpi
-     - mpich
-
-     container:
-       images:
-         os: centos/7
-         spack: 0.15.4
-
-uses ``spack/centos7:0.15.4``  and ``centos:7`` for the stages where the
-software is respectively built and installed:
-
-.. code-block:: docker
-
-   # Build stage with Spack pre-installed and ready to be used
-   FROM spack/centos7:0.15.4 as builder
-
-   # What we want to install and how we want to install it
-   # is specified in a manifest file (spack.yaml)
-   RUN mkdir /opt/spack-environment \
-   &&  (echo "spack:" \
-   &&   echo "  specs:" \
-   &&   echo "  - gromacs+mpi" \
-   &&   echo "  - mpich" \
-   &&   echo "  concretization: together" \
-   &&   echo "  config:" \
-   &&   echo "    install_tree: /opt/software" \
-   &&   echo "  view: /opt/view") > /opt/spack-environment/spack.yaml
-   [ ... ]
-   # Bare OS image to run the installed executables
-   FROM centos:7
-
-   COPY --from=builder /opt/spack-environment /opt/spack-environment
-   COPY --from=builder /opt/software /opt/software
-   COPY --from=builder /opt/view /opt/view
-   COPY --from=builder /etc/profile.d/z10_spack_environment.sh /etc/profile.d/z10_spack_environment.sh
-
-   ENTRYPOINT ["/bin/bash", "--rcfile", "/etc/profile", "-l"]
-
-This method of selecting base images is the simplest of the two, and we advise
-to use it whenever possible. There are cases though where using Spack official
-images is not enough to fit production needs. In these situations users can manually
-select which base image to start from in the recipe, as we'll see next.
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Use Custom Images Provided by Users
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Consider, as an example, building a production grade image for a CUDA
-application. The best strategy would probably be to build on top of
-images provided by the vendor and regard CUDA as an external package.
-
-Spack doesn't currently provide an official image with CUDA configured
-this way, but users can build it on their own and then configure the
-environment to explicitly pull it. This requires users to:
-
-1. Specify the image used to build the software under ``images:build``
-2. Specify the image used to install the built software under ``images:final``
-
-A ``spack.yaml`` like the following:
-
-.. code-block:: yaml
-
-   spack:
-     specs:
-     - gromacs@2019.4+cuda build_type=Release
-     - mpich
-     - fftw precision=float
-     packages:
-       cuda:
-         buildable: False
-         externals:
-         - spec: cuda%gcc
-           prefix: /usr/local/cuda
-
-     container:
-       images:
-         build: custom/cuda-10.1-ubuntu18.04:latest
-         final: nvidia/cuda:10.1-base-ubuntu18.04
-
-produces, for instance, the following ``Dockerfile``:
-
-.. code-block:: docker
-
-   # Build stage with Spack pre-installed and ready to be used
-   FROM custom/cuda-10.1-ubuntu18.04:latest as builder
-
-   # What we want to install and how we want to install it
-   # is specified in a manifest file (spack.yaml)
-   RUN mkdir /opt/spack-environment \
-   &&  (echo "spack:" \
-   &&   echo "  specs:" \
-   &&   echo "  - gromacs@2019.4+cuda build_type=Release" \
-   &&   echo "  - mpich" \
-   &&   echo "  - fftw precision=float" \
-   &&   echo "  packages:" \
-   &&   echo "    cuda:" \
-   &&   echo "      buildable: false" \
-   &&   echo "      externals:" \
-   &&   echo "      - spec: cuda%gcc" \
-   &&   echo "        prefix: /usr/local/cuda" \
-   &&   echo "  concretization: together" \
-   &&   echo "  config:" \
-   &&   echo "    install_tree: /opt/software" \
-   &&   echo "  view: /opt/view") > /opt/spack-environment/spack.yaml
-
-   # Install the software, remove unnecessary deps
-   RUN cd /opt/spack-environment && spack env activate . && spack install --fail-fast && spack gc -y
-
-   # Strip all the binaries
-   RUN find -L /opt/view/* -type f -exec readlink -f '{}' \; | \
-       xargs file -i | \
-       grep 'charset=binary' | \
-       grep 'x-executable\|x-archive\|x-sharedlib' | \
-       awk -F: '{print $1}' | xargs strip -s
-
-   # Modifications to the environment that are necessary to run
-   RUN cd /opt/spack-environment && \
-       spack env activate --sh -d . >> /etc/profile.d/z10_spack_environment.sh
-
-   # Bare OS image to run the installed executables
-   FROM nvidia/cuda:10.1-base-ubuntu18.04
-
-   COPY --from=builder /opt/spack-environment /opt/spack-environment
-   COPY --from=builder /opt/software /opt/software
-   COPY --from=builder /opt/view /opt/view
-   COPY --from=builder /etc/profile.d/z10_spack_environment.sh /etc/profile.d/z10_spack_environment.sh
-
-   ENTRYPOINT ["/bin/bash", "--rcfile", "/etc/profile", "-l"]
-
-where the base images for both stages are completely custom.
-
-This second mode of selection for base images is more flexible than just
-choosing an operating system and a Spack version, but is also more demanding.
-Users may need to generate by themselves their base images and it's also their
-responsibility to ensure that:
-
-1. Spack is available in the ``build`` stage and set up correctly to install the required software
-2. The artifacts produced in the ``build`` stage can be executed in the ``final`` stage
-
-Therefore we don't recommend its use in cases that can be otherwise
-covered by the simplified mode shown first.
-
-----------------------------
-Singularity Definition Files
-----------------------------
-
-In addition to producing recipes in ``Dockerfile`` format Spack can produce
-Singularity Definition Files by just changing the value of the ``format``
-attribute:
-
-.. code-block:: console
-
-   $ cat spack.yaml
-   spack:
-     specs:
-     - hdf5~mpi
-     container:
-       format: singularity
-
-   $ spack containerize > hdf5.def
-   $ sudo singularity build hdf5.sif hdf5.def
-
-The minimum version of Singularity required to build a SIF (Singularity Image Format)
-image from the recipes generated by Spack is ``3.5.3``.
-
-.. _container_config_options:
-
------------------------
-Configuration Reference
------------------------
-
-The tables below describe all the configuration options that are currently supported
-to customize the generation of container recipes:
+The tables below describe the configuration options that are currently supported:
 
 .. list-table:: General configuration options for the ``container`` section of ``spack.yaml``
    :header-rows: 1
@@ -407,41 +185,21 @@ to customize the generation of container recipes:
      - The format of the recipe
      - ``docker`` or ``singularity``
      - Yes
-   * - ``images:os``
-     - Operating system used as a base for the image
+   * - ``base:image``
+     - Base image for ``final`` stage
      - See :ref:`containers-supported-os`
-     - Yes, if using constrained selection of base images
-   * - ``images:spack``
-     - Version of Spack use in the ``build`` stage
+     - Yes
+   * - ``base:spack``
+     - Version of Spack
      - Valid tags for ``base:image``
-     - Yes, if using constrained selection of base images
-   * - ``images:build``
-     - Image to be used in the ``build`` stage
-     - Any valid container image
-     - Yes, if using custom selection of base images
-   * - ``images:final``
-     - Image to be used in the ``build`` stage
-     - Any valid container image
-     - Yes, if using custom selection of base images
+     - Yes
    * - ``strip``
      - Whether to strip binaries
      - ``true`` (default) or ``false``
      - No
-   * - ``os_packages:command``
-     - Tool used to manage system packages
-     - ``apt``, ``yum``
-     - Only with custom base images
-   * - ``os_packages:update``
-     - Whether or not to update the list of available packages
-     - True or False (default: True)
-     - No
-   * - ``os_packages:build``
-     - System packages needed at build-time
-     - Valid packages for the current OS
-     - No
-   * - ``os_packages:final``
-     - System packages needed at run-time
-     - Valid packages for the current OS
+   * - ``os_packages``
+     - System packages to be installed
+     - Valid packages for the ``final`` OS
      - No
    * - ``extra_instructions:build``
      - Extra instructions (e.g. `RUN`, `COPY`, etc.) at the end of the ``build`` stage
@@ -480,56 +238,70 @@ to customize the generation of container recipes:
      - Description string
      - No
 
---------------
-Best Practices
---------------
+Once the Environment is properly configured a recipe for a container
+image can be printed to standard output by issuing the following
+command from the directory where the ``spack.yaml`` resides:
 
-^^^
-MPI
-^^^
-Due to the dependency on Fortran for OpenMPI, which is the spack default
-implementation, consider adding ``gfortran`` to the ``apt-get install`` list.
+.. code-block:: console
 
-Recent versions of OpenMPI will require you to pass ``--allow-run-as-root``
-to your ``mpirun`` calls if started as root user inside Docker.
+   $ spack containerize
 
-For execution on HPC clusters, it can be helpful to import the docker
-image into Singularity in order to start a program with an *external*
-MPI. Otherwise, also add ``openssh-server`` to the ``apt-get install`` list.
+The example ``spack.yaml`` above would produce for instance the
+following ``Dockerfile``:
 
-^^^^
-CUDA
-^^^^
-Starting from CUDA 9.0, Nvidia provides minimal CUDA images based on
-Ubuntu. Please see `their instructions <https://hub.docker.com/r/nvidia/cuda/>`_.
-Avoid double-installing CUDA by adding, e.g.
+.. code-block:: docker
 
-.. code-block:: yaml
+   # Build stage with Spack pre-installed and ready to be used
+   FROM spack/centos7:latest as builder
 
-   packages:
-     cuda:
-       externals:
-       - spec: "cuda@9.0.176%gcc@5.4.0 arch=linux-ubuntu16-x86_64"
-         prefix: /usr/local/cuda
-       buildable: False
+   # What we want to install and how we want to install it
+   # is specified in a manifest file (spack.yaml)
+   RUN mkdir /opt/spack-environment \
+   &&  (echo "spack:" \
+   &&   echo "  specs:" \
+   &&   echo "  - gromacs+mpi" \
+   &&   echo "  - mpich" \
+   &&   echo "  concretization: together" \
+   &&   echo "  config:" \
+   &&   echo "    install_tree: /opt/software" \
+   &&   echo "  view: /opt/view") > /opt/spack-environment/spack.yaml
 
-to your ``spack.yaml``.
+   # Install the software, remove unecessary deps
+   RUN cd /opt/spack-environment && spack install && spack gc -y
 
-Users will either need ``nvidia-docker`` or e.g. Singularity to *execute*
-device kernels.
+   # Strip all the binaries
+   RUN find -L /opt/view/* -type f -exec readlink -f '{}' \; | \
+       xargs file -i | \
+       grep 'charset=binary' | \
+       grep 'x-executable\|x-archive\|x-sharedlib' | \
+       awk -F: '{print $1}' | xargs strip -s
 
-^^^^^^^^^^^^^^^^^^^^^^^^^
-Docker on Windows and OSX
-^^^^^^^^^^^^^^^^^^^^^^^^^
+   # Modifications to the environment that are necessary to run
+   RUN cd /opt/spack-environment && \
+       spack env activate --sh -d . >> /etc/profile.d/z10_spack_environment.sh
 
-On Mac OS and Windows, docker runs on a hypervisor that is not allocated much
-memory by default, and some spack packages may fail to build due to lack of
-memory. To work around this issue, consider configuring your docker installation
-to use more of your host memory. In some cases, you can also ease the memory
-pressure on parallel builds by limiting the parallelism in your config.yaml.
 
-.. code-block:: yaml
+   # Bare OS image to run the installed executables
+   FROM centos:7
 
-   config:
-     build_jobs: 2
+   COPY --from=builder /opt/spack-environment /opt/spack-environment
+   COPY --from=builder /opt/software /opt/software
+   COPY --from=builder /opt/view /opt/view
+   COPY --from=builder /etc/profile.d/z10_spack_environment.sh /etc/profile.d/z10_spack_environment.sh
 
+   RUN yum update -y && yum install -y epel-release && yum update -y                                   \
+    && yum install -y libgomp \
+    && rm -rf /var/cache/yum  && yum clean all
+
+   RUN echo 'export PS1="\[$(tput bold)\]\[$(tput setaf 1)\][gromacs]\[$(tput setaf 2)\]\u\[$(tput sgr0)\]:\w $ \[$(tput sgr0)\]"' >> ~/.bashrc
+
+
+   LABEL "app"="gromacs"
+   LABEL "mpi"="mpich"
+
+   ENTRYPOINT ["/bin/bash", "--rcfile", "/etc/profile", "-l"]
+
+.. note::
+   Spack can also produce Singularity definition files to build the image. The
+   minimum version of Singularity required to build a SIF (Singularity Image Format)
+   from them is ``3.5.3``.

lib/spack/docs/contribution_guide.rst

@@ -27,28 +27,17 @@ correspond to one feature/bugfix/extension/etc. One can create PRs with
 changes relevant to different ideas, however reviewing such PRs becomes tedious
 and error prone. If possible, try to follow the **one-PR-one-package/feature** rule.
 
---------
-Branches
---------
-
-Spack's ``develop`` branch has the latest contributions. Nearly all pull
-requests should start from ``develop`` and target ``develop``.
-
-There is a branch for each major release series. Release branches
-originate from ``develop`` and have tags for each point release in the
-series. For example, ``releases/v0.14`` has tags for ``0.14.0``,
-``0.14.1``, ``0.14.2``, etc. versions of Spack. We backport important bug
-fixes to these branches, but we do not advance the package versions or
-make other changes that would change the way Spack concretizes
-dependencies. Currently, the maintainers manage these branches by
-cherry-picking from ``develop``. See :ref:`releases` for more
-information.
+Spack uses a rough approximation of the `Git Flow <http://nvie.com/posts/a-successful-git-branching-model/>`_
+branching model. The develop branch contains the latest contributions, and
+master is always tagged and points to the latest stable release. Therefore, when
+you send your request, make ``develop`` the destination branch on the
+`Spack repository <https://github.com/spack/spack>`_.
 
 ----------------------
 Continuous Integration
 ----------------------
 
-Spack uses `Github Actions <https://docs.github.com/en/actions>`_ for Continuous Integration
+Spack uses `Travis CI <https://travis-ci.org/spack/spack>`_ for Continuous Integration
 testing. This means that every time you submit a pull request, a series of tests will
 be run to make sure you didn't accidentally introduce any bugs into Spack. **Your PR
 will not be accepted until it passes all of these tests.** While you can certainly wait
@@ -57,24 +46,25 @@ locally to speed up the review process.
 
 .. note::
 
-   Oftentimes, CI will fail for reasons other than a problem with your PR.
+   Oftentimes, Travis will fail for reasons other than a problem with your PR.
    For example, apt-get, pip, or homebrew will fail to download one of the
    dependencies for the test suite, or a transient bug will cause the unit tests
-   to timeout. If any job fails, click the "Details" link and click on the test(s)
+   to timeout. If Travis fails, click the "Details" link and click on the test(s)
    that is failing. If it doesn't look like it is failing for reasons related to
    your PR, you have two options. If you have write permissions for the Spack
-   repository, you should see a "Restart workflow" button on the right-hand side. If
+   repository, you should see a "Restart job" button on the right-hand side. If
    not, you can close and reopen your PR to rerun all of the tests. If the same
    test keeps failing, there may be a problem with your PR. If you notice that
-   every recent PR is failing with the same error message, it may be that an issue
-   occurred with the CI infrastructure or one of Spack's dependencies put out a
-   new release that is causing problems. If this is the case, please file an issue.
+   every recent PR is failing with the same error message, it may be that Travis
+   is down or one of Spack's dependencies put out a new release that is causing
+   problems. If this is the case, please file an issue.
 
 
-We currently test against Python 2.6, 2.7, and 3.5-3.7 on both macOS and Linux and
+If you take a look in ``$SPACK_ROOT/.travis.yml``, you'll notice that we test
+against Python 2.6, 2.7, and 3.4-3.7 on both macOS and Linux. We currently
 perform 3 types of tests:
 
-.. _cmd-spack-unit-test:
+.. _cmd-spack-test:
 
 ^^^^^^^^^^
 Unit Tests
@@ -96,7 +86,7 @@ To run *all* of the unit tests, use:
 
 .. code-block:: console
 
-   $ spack unit-test
+   $ spack test
 
 These tests may take several minutes to complete. If you know you are
 only modifying a single Spack feature, you can run subsets of tests at a
@@ -105,53 +95,51 @@ time.  For example, this would run all the tests in
 
 .. code-block:: console
 
-   $ spack unit-test lib/spack/spack/test/architecture.py
+   $ spack test architecture.py
 
 And this would run the ``test_platform`` test from that file:
 
 .. code-block:: console
 
-   $ spack unit-test lib/spack/spack/test/architecture.py::test_platform
+   $ spack test architecture.py::test_platform
 
 This allows you to develop iteratively: make a change, test that change,
 make another change, test that change, etc.  We use `pytest
-<http://pytest.org/>`_ as our tests framework, and these types of
+<http://pytest.org/>`_ as our tests fromework, and these types of
 arguments are just passed to the ``pytest`` command underneath. See `the
 pytest docs
 <http://doc.pytest.org/en/latest/usage.html#specifying-tests-selecting-tests>`_
 for more details on test selection syntax.
 
-``spack unit-test`` has a few special options that can help you
-understand what tests are available.  To get a list of all available
-unit test files, run:
+``spack test`` has a few special options that can help you understand
+what tests are available.  To get a list of all available unit test
+files, run:
 
-.. command-output:: spack unit-test --list
+.. command-output:: spack test --list
    :ellipsis: 5
 
-To see a more detailed list of available unit tests, use ``spack
-unit-test --list-long``:
+To see a more detailed list of available unit tests, use ``spack test
+--list-long``:
 
-.. command-output:: spack unit-test --list-long
+.. command-output:: spack test --list-long
    :ellipsis: 10
 
 And to see the fully qualified names of all tests, use ``--list-names``:
 
-.. command-output:: spack unit-test --list-names
+.. command-output:: spack test --list-names
    :ellipsis: 5
 
 You can combine these with ``pytest`` arguments to restrict which tests
 you want to know about.  For example, to see just the tests in
 ``architecture.py``:
 
-.. command-output:: spack unit-test --list-long lib/spack/spack/test/architecture.py
+.. command-output:: spack test --list-long architecture.py
 
 You can also combine any of these options with a ``pytest`` keyword
-search.  See the `pytest usage docs
-<https://docs.pytest.org/en/stable/usage.html#specifying-tests-selecting-tests>`_:
-for more details on test selection syntax. For example, to see the names of all tests that have "spec"
+search.  For example, to see the names of all tests that have "spec"
 or "concretize" somewhere in their names:
 
-.. command-output:: spack unit-test --list-names -k "spec and concretize"
+.. command-output:: spack test --list-names -k "spec and concretize"
 
 By default, ``pytest`` captures the output of all unit tests, and it will
 print any captured output for failed tests. Sometimes it's helpful to see
@@ -161,7 +149,7 @@ argument to ``pytest``:
 
 .. code-block:: console
 
-   $ spack unit-test -s --list-long lib/spack/spack/test/architecture.py::test_platform
+   $ spack test -s architecture.py::test_platform
 
 Unit tests are crucial to making sure bugs aren't introduced into
 Spack. If you are modifying core Spack libraries or adding new
@@ -174,9 +162,9 @@ how to write tests!
 .. note::
 
    You may notice the ``share/spack/qa/run-unit-tests`` script in the
-   repository.  This script is designed for CI.  It runs the unit
+   repository.  This script is designed for Travis CI.  It runs the unit
    tests and reports coverage statistics back to Codecov. If you want to
-   run the unit tests yourself, we suggest you use ``spack unit-test``.
+   run the unit tests yourself, we suggest you use ``spack test``.
 
 ^^^^^^^^^^^^
 Flake8 Tests
@@ -247,7 +235,7 @@ to update them.
 
    Try fixing flake8 errors in reverse order. This eliminates the need for
    multiple runs of ``spack flake8`` just to re-compute line numbers and
-   makes it much easier to fix errors directly off of the CI output.
+   makes it much easier to fix errors directly off of the Travis output.
 
 .. warning::
 
@@ -327,7 +315,7 @@ Once all of the dependencies are installed, you can try building the documentati
 
 .. code-block:: console
 
-   $ cd path/to/spack/lib/spack/docs/
+   $ cd "$SPACK_ROOT/lib/spack/docs"
    $ make clean
    $ make
 
@@ -339,7 +327,7 @@ your PR is accepted.
    There is also a ``run-doc-tests`` script in ``share/spack/qa``. The only
    difference between running this script and running ``make`` by hand is that
    the script will exit immediately if it encounters an error or warning. This
-   is necessary for CI. If you made a lot of documentation changes, it is
+   is necessary for Travis CI. If you made a lot of documentation changes, it is
    much quicker to run ``make`` by hand so that you can see all of the warnings
    at once.
 
@@ -397,13 +385,13 @@ coverage. This helps us tell what percentage of lines of code in Spack are
 covered by unit tests. Although code covered by unit tests can still contain
 bugs, it is much less error prone than code that is not covered by unit tests.
 
-Codecov provides `browser extensions <https://github.com/codecov/sourcegraph-codecov>`_
-for Google Chrome and Firefox. These extensions integrate with GitHub
+Codecov provides `browser extensions <https://github.com/codecov/browser-extension>`_
+for Google Chrome, Firefox, and Opera. These extensions integrate with GitHub
 and allow you to see coverage line-by-line when viewing the Spack repository.
 If you are new to Spack, a great way to get started is to write unit tests to
 increase coverage!
 
-Unlike with CI on Github Actions Codecov tests are not required to pass in order for your
+Unlike with Travis, Codecov tests are not required to pass in order for your
 PR to be merged. If you modify core Spack libraries, we would greatly
 appreciate unit tests that cover these changed lines. Otherwise, we have no
 way of knowing whether or not your changes introduce a bug. If you make

lib/spack/docs/developer_guide.rst

@@ -363,12 +363,11 @@ Developer commands
 ``spack doc``
 ^^^^^^^^^^^^^
 
-^^^^^^^^^^^^^^^^^^^
-``spack unit-test``
-^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^
+``spack test``
+^^^^^^^^^^^^^^
 
-See the :ref:`contributor guide section <cmd-spack-unit-test>` on
-``spack unit-test``.
+See the :ref:`contributor guide section <cmd-spack-test>` on ``spack test``.
 
 .. _cmd-spack-python:
 
@@ -496,384 +495,3 @@ The bottom of the output shows the top most time consuming functions,
 slowest on top.  The profiling support is from Python's built-in tool,
 `cProfile
 <https://docs.python.org/2/library/profile.html#module-cProfile>`_.
-
-.. _releases:
-
---------
-Releases
---------
-
-This section documents Spack's release process. It is intended for
-project maintainers, as the tasks described here require maintainer
-privileges on the Spack repository. For others, we hope this section at
-least provides some insight into how the Spack project works.
-
-.. _release-branches:
-
-^^^^^^^^^^^^^^^^
-Release branches
-^^^^^^^^^^^^^^^^
-
-There are currently two types of Spack releases: :ref:`major releases
-<major-releases>` (``0.13.0``, ``0.14.0``, etc.) and :ref:`point releases
-<point-releases>` (``0.13.1``, ``0.13.2``, ``0.13.3``, etc.). Here is a
-diagram of how Spack release branches work::
-
-    o    branch: develop  (latest version)
-    |
-    o    merge v0.14.1 into develop
-    |\
-    | o  branch: releases/v0.14, tag: v0.14.1
-    o |  merge v0.14.0 into develop
-    |\|
-    | o  tag: v0.14.0
-    |/
-    o    merge v0.13.2 into develop
-    |\
-    | o  branch: releases/v0.13, tag: v0.13.2
-    o |  merge v0.13.1 into develop
-    |\|
-    | o  tag: v0.13.1
-    o |  merge v0.13.0 into develop
-    |\|
-    | o  tag: v0.13.0
-    o |
-    | o
-    |/
-    o
-
-The ``develop`` branch has the latest contributions, and nearly all pull
-requests target ``develop``.
-
-Each Spack release series also has a corresponding branch, e.g.
-``releases/v0.14`` has ``0.14.x`` versions of Spack, and
-``releases/v0.13`` has ``0.13.x`` versions. A major release is the first
-tagged version on a release branch. Minor releases are back-ported from
-develop onto release branches. This is typically done by cherry-picking
-bugfix commits off of ``develop``.
-
-To avoid version churn for users of a release series, minor releases
-should **not** make changes that would change the concretization of
-packages. They should generally only contain fixes to the Spack core.
-
-Both major and minor releases are tagged. After each release, we merge
-the release branch back into ``develop`` so that the version bump and any
-other release-specific changes are visible in the mainline. As a
-convenience, we also tag the latest release as ``releases/latest``,
-so that users can easily check it out to get the latest
-stable version. See :ref:`merging-releases` for more details.
-
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Scheduling work for releases
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-We schedule work for releases by creating `GitHub projects
-<https://github.com/spack/spack/projects>`_. At any time, there may be
-several open release projects. For example, here are two releases (from
-some past version of the page linked above):
-
-.. image:: images/projects.png
-
-Here, there's one release in progress for ``0.15.1`` and another for
-``0.16.0``. Each of these releases has a project board containing issues
-and pull requests. GitHub shows a status bar with completed work in
-green, work in progress in purple, and work not started yet in gray, so
-it's fairly easy to see progress.
-
-Spack's project boards are not firm commitments, and we move work between
-releases frequently. If we need to make a release and some tasks are not
-yet done, we will simply move them to next minor or major release, rather
-than delaying the release to complete them.
-
-For more on using GitHub project boards, see `GitHub's documentation
-<https://docs.github.com/en/github/managing-your-work-on-github/about-project-boards>`_.
-
-.. _major-releases:
-
-^^^^^^^^^^^^^^^^^^^^^
-Making Major Releases
-^^^^^^^^^^^^^^^^^^^^^
-
-Assuming you've already created a project board and completed the work
-for a major release, the steps to make the release are as follows:
-
-#. Create two new project boards:
-
-   * One for the next major release
-   * One for the next point release
-
-#. Move any tasks that aren't done yet to one of the new project boards.
-   Small bugfixes should go to the next point release. Major features,
-   refactors, and changes that could affect concretization should go in
-   the next major release.
-
-#. Create a branch for the release, based on ``develop``:
-
-   .. code-block:: console
-
-      $ git checkout -b releases/v0.15 develop
-
-   For a version ``vX.Y.Z``, the branch's name should be
-   ``releases/vX.Y``. That is, you should create a ``releases/vX.Y``
-   branch if you are preparing the ``X.Y.0`` release.
-
-#. Bump the version in ``lib/spack/spack/__init__.py``. See `this example from 0.13.0
-   <https://github.com/spack/spack/commit/8eeb64096c98b8a43d1c587f13ece743c864fba9>`_
-
-#. Update ``CHANGELOG.md`` with major highlights in bullet form. Use
-   proper markdown formatting, like `this example from 0.15.0
-   <https://github.com/spack/spack/commit/d4bf70d9882fcfe88507e9cb444331d7dd7ba71c>`_.
-
-#. Push the release branch to GitHub.
-
-#. Make sure CI passes on the release branch, including:
-
-   * Regular unit tests
-   * Build tests
-   * The E4S pipeline at `gitlab.spack.io <https://gitlab.spack.io>`_
-
-   If CI is not passing, submit pull requests to ``develop`` as normal
-   and keep rebasing the release branch on ``develop`` until CI passes.
-
-#. Follow the steps in :ref:`publishing-releases`.
-
-#. Follow the steps in :ref:`merging-releases`.
-
-#. Follow the steps in :ref:`announcing-releases`.
-
-
-.. _point-releases:
-
-^^^^^^^^^^^^^^^^^^^^^
-Making Point Releases
-^^^^^^^^^^^^^^^^^^^^^
-
-This assumes you've already created a project board for a point release
-and completed the work to be done for the release. To make a point
-release:
-
-#. Create one new project board for the next point release.
-
-#. Move any cards that aren't done yet to the next project board.
-
-#. Check out the release branch (it should already exist). For the
-   ``X.Y.Z`` release, the release branch is called ``releases/vX.Y``. For
-   ``v0.15.1``, you would check out ``releases/v0.15``:
-
-   .. code-block:: console
-
-      $ git checkout releases/v0.15
-
-#. Cherry-pick each pull request in the ``Done`` column of the release
-   project onto the release branch.
-
-   This is **usually** fairly simple since we squash the commits from the
-   vast majority of pull requests, which means there is only one commit
-   per pull request to cherry-pick. For example, `this pull request
-   <https://github.com/spack/spack/pull/15777>`_ has three commits, but
-   the were squashed into a single commit on merge. You can see the
-   commit that was created here:
-
-   .. image:: images/pr-commit.png
-
-   You can easily cherry pick it like this (assuming you already have the
-   release branch checked out):
-
-   .. code-block:: console
-
-      $ git cherry-pick 7e46da7
-
-   For pull requests that were rebased, you'll need to cherry-pick each
-   rebased commit individually. There have not been any rebased PRs like
-   this in recent point releases.
-
-   .. warning::
-
-      It is important to cherry-pick commits in the order they happened,
-      otherwise you can get conflicts while cherry-picking. When
-      cherry-picking onto a point release, look at the merge date,
-      **not** the number of the pull request or the date it was opened.
-
-      Sometimes you may **still** get merge conflicts even if you have
-      cherry-picked all the commits in order. This generally means there
-      is some other intervening pull request that the one you're trying
-      to pick depends on. In these cases, you'll need to make a judgment
-      call:
-
-      1. If the dependency is small, you might just cherry-pick it, too.
-         If you do this, add it to the release board.
-
-      2. If it is large, then you may decide that this fix is not worth
-         including in a point release, in which case you should remove it
-         from the release project.
-
-      3. You can always decide to manually back-port the fix to the release
-         branch if neither of the above options makes sense, but this can
-         require a lot of work. It's seldom the right choice.
-
-#. Bump the version in ``lib/spack/spack/__init__.py``. See `this example from 0.14.1
-   <https://github.com/spack/spack/commit/ff0abb9838121522321df2a054d18e54b566b44a>`_.
-
-#. Update ``CHANGELOG.md`` with a list of bugfixes. This is typically just a
-   summary of the commits you cherry-picked onto the release branch. See
-   `the changelog from 0.14.1
-   <https://github.com/spack/spack/commit/ff0abb9838121522321df2a054d18e54b566b44a>`_.
-
-#. Push the release branch to GitHub.
-
-#. Make sure CI passes on the release branch, including:
-   * Regular unit tests
-   * Build tests
-   * The E4S pipeline at `gitlab.spack.io <https://gitlab.spack.io>`_
-
-   If CI does not pass, you'll need to figure out why, and make changes
-   to the release branch until it does. You can make more commits, modify
-   or remove cherry-picked commits, or cherry-pick **more** from
-   ``develop`` to make this happen.
-
-#. Follow the steps in :ref:`publishing-releases`.
-
-#. Follow the steps in :ref:`merging-releases`.
-
-#. Follow the steps in :ref:`announcing-releases`.
-
-
-.. _publishing-releases:
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Publishing a release on GitHub
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-#. Go to `github.com/spack/spack/releases
-   <https://github.com/spack/spack/releases>`_ and click ``Draft a new
-   release``.  Set the following:
-
-   * ``Tag version`` should start with ``v`` and contain *all three*
-     parts of the version, .g. ``v0.15.1``. This is the name of the tag
-     that will be created.
-
-   * ``Target`` should be the ``releases/vX.Y`` branch (e.g., ``releases/v0.15``).
-
-   * ``Release title`` should be ``vX.Y.Z`` (To match the tag, e.g., ``v0.15.1``).
-
-   * For the text, paste the latest release markdown from your ``CHANGELOG.md``.
-
-   You can save the draft and keep coming back to this as you prepare the release.
-
-#. When you are done, click ``Publish release``.
-
-#. Immediately after publishing, go back to
-   `github.com/spack/spack/releases
-   <https://github.com/spack/spack/releases>`_ and download the
-   auto-generated ``.tar.gz`` file for the release. It's the ``Source
-   code (tar.gz)`` link.
-
-#. Click ``Edit`` on the release you just did and attach the downloaded
-   release tarball as a binary. This does two things:
-
-   #. Makes sure that the hash of our releases doesn't change over time.
-      GitHub sometimes annoyingly changes they way they generate
-      tarballs, and then hashes can change if you rely on the
-      auto-generated tarball links.
-
-   #. Gets us download counts on releases visible through the GitHub
-      API. GitHub tracks downloads of artifacts, but *not* the source
-      links. See the `releases
-      page <https://api.github.com/repos/spack/spack/releases>`_ and search
-      for ``download_count`` to see this.
-
-#. Go to `readthedocs.org <https://readthedocs.org/projects/spack>`_ and activate
-   the release tag. This builds the documentation and makes the released version
-   selectable in the versions menu.
-
-
-.. _merging-releases:
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Updating `releases/latest` and `develop`
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-If the new release is the **highest** Spack release yet, you should
-also tag it as ``releases/latest``. For example, suppose the highest
-release is currently ``0.15.3``:
-
-     * If you are releasing ``0.15.4`` or ``0.16.0``, then you should tag
-       it with ``releases/latest``, as these are higher than ``0.15.3``.
-
-     * If you are making a new release of an **older** major version of
-       Spack, e.g. ``0.14.4``, then you should not tag it as
-       ``releases/latest`` (as there are newer major versions).
-
-   To tag ``releases/latest``, do this:
-
-   .. code-block:: console
-
-      $ git checkout releases/vX.Y     # vX.Y is the new release's branch
-      $ git tag --force releases/latest
-      $ git push --tags
-
-   The ``--force`` argument makes ``git`` overwrite the existing
-   ``releases/latest`` tag with the new one.
-
-We also merge each release that we tag as ``releases/latest`` into ``develop``.
-Make sure to do this with a merge commit:
-
-.. code-block:: console
-
-   $ git checkout develop
-   $ git merge --no-ff vX.Y.Z  # vX.Y.Z is the new release's tag
-   $ git push
-
-We merge back to ``develop`` because it:
-
-  * updates the version and ``CHANGELOG.md`` on ``develop``.
-  * ensures that your release tag is reachable from the head of
-    ``develop``
-
-We *must* use a real merge commit (via the ``--no-ff`` option) because it
-ensures that the release tag is reachable from the tip of ``develop``.
-This is necessary for ``spack -V`` to work properly -- it uses ``git
-describe --tags`` to find the last reachable tag in the repository and
-reports how far we are from it. For example:
-
-.. code-block:: console
-
-   $ spack -V
-   0.14.2-1486-b80d5e74e5
-
-This says that we are at commit ``b80d5e74e5``, which is 1,486 commits
-ahead of the ``0.14.2`` release.
-
-We put this step last in the process because it's best to do it only once
-the release is complete and tagged. If you do it before you've tagged the
-release and later decide you want to tag some later commit, you'll need
-to merge again.
-
-.. _announcing-releases:
-
-^^^^^^^^^^^^^^^^^^^^
-Announcing a release
-^^^^^^^^^^^^^^^^^^^^
-
-We announce releases in all of the major Spack communication channels.
-Publishing the release takes care of GitHub. The remaining channels are
-Twitter, Slack, and the mailing list. Here are the steps:
-
-#. Make a tweet to announce the release. It should link to the release's
-   page on GitHub. You can base it on `this example tweet
-   <https://twitter.com/spackpm/status/1231761858182307840>`_.
-
-#. Ping ``@channel`` in ``#general`` on Slack (`spackpm.slack.com
-   <https://spackpm.slack.com>`_) with a link to the tweet. The tweet
-   will be shown inline so that you do not have to retype your release
-   announcement.
-
-#. Email the Spack mailing list to let them know about the release. As
-   with the tweet, you likely want to link to the release's page on
-   GitHub. It's also helpful to include some information directly in the
-   email. You can base yours on this `example email
-   <https://groups.google.com/forum/#!topic/spack/WT4CT9i_X4s>`_.
-
-Once you've announced the release, congratulations, you're done! You've
-finished making the release!

lib/spack/docs/docker_for_developers.rst

@@ -0,0 +1,41 @@
+.. Copyright 2013-2020 Lawrence Livermore National Security, LLC and other
+   Spack Project Developers. See the top-level COPYRIGHT file for details.
+
+   SPDX-License-Identifier: (Apache-2.0 OR MIT)
+
+.. _docker_for_developers:
+
+=====================
+Docker for Developers
+=====================
+
+This guide is intended for people who want to use our prepared docker
+environments to work on developing Spack or working on spack packages. It is
+meant to serve as the companion documentation for the :ref:`packaging-guide`.
+
+--------
+Overview
+--------
+
+To get started, all you need is the latest version of ``docker``.
+
+.. code-block:: console
+
+    $ cd share/spack/docker
+    $ source config/ubuntu.bash
+    $ ./run-image.sh
+
+This command should drop you into an interactive shell where you can run spack
+within an isolated docker container running ubuntu.  The copy of spack being
+used should be tied to the working copy of your cloned git repo, so any changes
+you make should be immediately reflected in the running docker container.  Feel
+free to add or modify any packages or to hack on spack, itself.  Your contained
+copy of spack should immediately reflect all changes.
+
+To work within a container running a different linux distro, source one of the
+other environment files under ``config``.
+
+.. code-block:: console
+
+    $ source config/fedora.bash
+    $ ./run-image.sh

lib/spack/docs/environments.rst

@@ -130,7 +130,7 @@ To activate an environment, use the following command:
 By default, the ``spack env activate`` will load the view associated
 with the Environment into the user environment. The ``-v,
 --with-view`` argument ensures this behavior, and the ``-V,
---without-view`` argument activates the environment without changing
+--without-vew`` argument activates the environment without changing
 the user environment variables.
 
 The ``-p`` option to the ``spack env activate`` command modifies the
@@ -167,6 +167,15 @@ Any directory can be treated as an environment if it contains a file
 
    $ spack env activate -d /path/to/directory
 
+Spack commands that are environment sensitive will also act on the
+environment any time the current working directory contains a
+``spack.yaml`` file. Changing working directory to a directory
+containing a ``spack.yaml`` file is equivalent to the command:
+
+.. code-block:: console
+
+   $ spack env activate -d /path/to/dir --without-view
+
 Anonymous specs can be created in place using the command:
 
 .. code-block:: console
@@ -191,24 +200,44 @@ Environment has been activated. Similarly, the ``install`` and
   ==> 0 installed packages
 
   $ spack install zlib@1.2.11
-  ==> Installing zlib-1.2.11-q6cqrdto4iktfg6qyqcc5u4vmfmwb7iv
-  ==> No binary for zlib-1.2.11-q6cqrdto4iktfg6qyqcc5u4vmfmwb7iv found: installing from source
-  ==> zlib: Executing phase: 'install'
-  [+] ~/spack/opt/spack/linux-rhel7-broadwell/gcc-8.1.0/zlib-1.2.11-q6cqrdto4iktfg6qyqcc5u4vmfmwb7iv
+  ==> Installing zlib
+  ==> Searching for binary cache of zlib
+  ==> Warning: No Spack mirrors are currently configured
+  ==> No binary for zlib found: installing from source
+  ==> Fetching http://zlib.net/fossils/zlib-1.2.11.tar.gz
+  ######################################################################## 100.0%
+  ==> Staging archive: /spack/var/spack/stage/zlib-1.2.11-3r4cfkmx3wwfqeof4bc244yduu2mz4ur/zlib-1.2.11.tar.gz
+  ==> Created stage in /spack/var/spack/stage/zlib-1.2.11-3r4cfkmx3wwfqeof4bc244yduu2mz4ur
+  ==> No patches needed for zlib
+  ==> Building zlib [Package]
+  ==> Executing phase: 'install'
+  ==> Successfully installed zlib
+    Fetch: 0.36s.  Build: 11.58s.  Total: 11.93s.
+  [+] /spack/opt/spack/linux-rhel7-x86_64/gcc-4.9.3/zlib-1.2.11-3r4cfkmx3wwfqeof4bc244yduu2mz4ur
 
   $ spack env activate myenv
 
   $ spack find
   ==> In environment myenv
   ==> No root specs
+
   ==> 0 installed packages
 
   $ spack install zlib@1.2.8
-  ==> Installing zlib-1.2.8-yfc7epf57nsfn2gn4notccaiyxha6z7x
-  ==> No binary for zlib-1.2.8-yfc7epf57nsfn2gn4notccaiyxha6z7x found: installing from source
-  ==> zlib: Executing phase: 'install'
-  [+] ~/spack/opt/spack/linux-rhel7-broadwell/gcc-8.1.0/zlib-1.2.8-yfc7epf57nsfn2gn4notccaiyxha6z7x
-  ==> Updating view at ~/spack/var/spack/environments/myenv/.spack-env/view
+  ==> Installing zlib
+  ==> Searching for binary cache of zlib
+  ==> Warning: No Spack mirrors are currently configured
+  ==> No binary for zlib found: installing from source
+  ==> Fetching http://zlib.net/fossils/zlib-1.2.8.tar.gz
+  ######################################################################## 100.0%
+  ==> Staging archive: /spack/var/spack/stage/zlib-1.2.8-y2t6kq3s23l52yzhcyhbpovswajzi7f7/zlib-1.2.8.tar.gz
+  ==> Created stage in /spack/var/spack/stage/zlib-1.2.8-y2t6kq3s23l52yzhcyhbpovswajzi7f7
+  ==> No patches needed for zlib
+  ==> Building zlib [Package]
+  ==> Executing phase: 'install'
+  ==> Successfully installed zlib
+    Fetch: 0.26s.  Build: 2.08s.  Total: 2.35s.
+  [+] /spack/opt/spack/linux-rhel7-x86_64/gcc-4.9.3/zlib-1.2.8-y2t6kq3s23l52yzhcyhbpovswajzi7f7
 
   $ spack find
   ==> In environment myenv
@@ -216,17 +245,15 @@ Environment has been activated. Similarly, the ``install`` and
   zlib@1.2.8
 
   ==> 1 installed package
-  -- linux-rhel7-broadwell / gcc@8.1.0 ----------------------------
+  -- linux-rhel7-x86_64 / gcc@4.9.3 -------------------------------
   zlib@1.2.8
 
   $ despacktivate
-
   $ spack find
   ==> 2 installed packages
-  -- linux-rhel7-broadwell / gcc@8.1.0 ----------------------------
+  -- linux-rhel7-x86_64 / gcc@4.9.3 -------------------------------
   zlib@1.2.8  zlib@1.2.11
 
-
 Note that when we installed the abstract spec ``zlib@1.2.8``, it was
 presented as a root of the Environment. All explicitly installed
 packages will be listed as roots of the Environment.
@@ -254,18 +281,18 @@ in the lockfile, nor does it install the spec.
 
 The ``spack add`` command is environment aware. It adds to the
 currently active environment. All environment aware commands can also
-be called using the ``spack -e`` flag to specify the environment.
+be called using the ``spack -E`` flag to specify the environment.
 
 .. code-block:: console
 
-   $ spack env activate myenv
+   $ spack activate myenv
    $ spack add mpileaks
 
 or
 
 .. code-block:: console
 
-   $ spack -e myenv add python
+   $ spack -E myenv add python
 
 .. _environments_concretization:
 
@@ -331,9 +358,6 @@ installed specs using the ``-c`` (``--concretized``) flag.
 
   ==> 0 installed packages
 
-
-.. _installing-environment:
-
 ^^^^^^^^^^^^^^^^^^^^^^^^^
 Installing an Environment
 ^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -578,7 +602,7 @@ files are identical.
    spack:
      definitions:
        - first: [libelf, libdwarf]
-       - compilers: ['%gcc', '%intel']
+       - compilers: ['%gcc', '^intel']
        - second:
            - $first
            - matrix:
@@ -623,7 +647,7 @@ named list ``compilers`` is ``['%gcc', '%clang', '%intel']`` on
    spack:
      definitions:
        - compilers: ['%gcc', '%clang']
-       - when: arch.satisfies('x86_64:')
+       - when: target == 'x86_64'
          compilers: ['%intel']
 
 .. note::
@@ -642,12 +666,8 @@ The valid variables for a ``when`` clause are:
 #. ``target``. The target string of the default Spack
    architecture on the system.
 
-#. ``architecture`` or ``arch``. A Spack spec satisfying the default Spack
-   architecture on the system. This supports querying via the ``satisfies``
-   method, as shown above.
-
-#. ``arch_str``. The architecture string of the default Spack architecture
-   on the system.
+#. ``architecture`` or ``arch``. The full string of the
+   default Spack architecture on the system.
 
 #. ``re``. The standard regex module in Python.
 
@@ -656,40 +676,6 @@ The valid variables for a ``when`` clause are:
 #. ``hostname``. The hostname of the system (if ``hostname`` is an
    executable in the user's PATH).
 
-""""""""""""""""""""""""
-SpecLists as Constraints
-""""""""""""""""""""""""
-
-Dependencies and compilers in Spack can be both packages in an
-environment and constraints on other packages. References to SpecLists
-allow a shorthand to treat packages in a list as either a compiler or
-a dependency using the ``$%`` or ``$^`` syntax respectively.
-
-For example, the following environment has three root packages:
-``gcc@8.1.0``, ``mvapich2@2.3.1 %gcc@8.1.0``, and ``hdf5+mpi
-%gcc@8.1.0 ^mvapich2@2.3.1``.
-
-.. code-block:: yaml
-
-   spack:
-     definitions:
-     - compilers: [gcc@8.1.0]
-     - mpis: [mvapich2@2.3.1]
-     - packages: [hdf5+mpi]
-
-     specs:
-     - $compilers
-     - matrix:
-       - [$mpis]
-       - [$%compilers]
-     - matrix:
-       - [$packages]
-       - [$^mpis]
-       - [$%compilers]
-
-This allows for a much-needed reduction in redundancy between packages
-and constraints.
-
 ^^^^^^^^^^^^^^^^^^^^^^^^^
 Environment-managed Views
 ^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -815,10 +801,8 @@ environment for Spack commands. The arguments ``-v,--with-view`` and
 behavior is to activate with the environment view if there is one.
 
 The environment variables affected by the ``spack env activate``
-command and the paths that are used to update them are determined by
-the :ref:`prefix inspections <customize-env-modifications>` defined in
-your modules configuration; the defaults are summarized in the following
-table.
+command and the paths that are used to update them are in the
+following table.
 
 =================== =========
 Variable            Paths

lib/spack/docs/extensions.rst

@@ -87,12 +87,11 @@ will be available from the command line:
      --implicit       select specs that are not installed or were installed implicitly
      --output OUTPUT  where to dump the result
 
-The corresponding unit tests can be run giving the appropriate options
-to ``spack unit-test``:
+The corresponding unit tests can be run giving the appropriate options to ``spack test``:
 
 .. code-block:: console
 
-   $ spack unit-test --extension=scripting
+   $ spack test --extension=scripting
 
    ============================================================== test session starts ===============================================================
    platform linux2 -- Python 2.7.15rc1, pytest-3.2.5, py-1.4.34, pluggy-0.4.0

lib/spack/docs/features.rst

@@ -48,8 +48,8 @@ platform, all on the command line.
    # Add compiler flags using the conventional names
    $ spack install mpileaks@1.1.2 %gcc@4.7.3 cppflags="-O3 -floop-block"
 
-   # Cross-compile for a different micro-architecture with target=
-   $ spack install mpileaks@1.1.2 target=icelake
+   # Cross-compile for a different architecture with arch=
+   $ spack install mpileaks@1.1.2 arch=bgqos_0
 
 Users can specify as many or few options as they care about. Spack
 will fill in the unspecified values with sensible defaults. The two listed

lib/spack/docs/getting_started.rst

@@ -16,18 +16,15 @@ Prerequisites
 Spack has the following minimum requirements, which must be installed
 before Spack is run:
 
-#. Python 2 (2.6 or 2.7) or 3 (3.5 - 3.9) to run Spack
+#. Python 2 (2.6 or 2.7) or 3 (3.5 - 3.8) to run Spack
 #. A C/C++ compiler for building
 #. The ``make`` executable for building
-#. The ``tar``, ``gzip``, ``bzip2``, ``xz`` and optionally ``zstd``
-   executables for extracting source code
-#. The ``patch`` command to apply patches
 #. The ``git`` and ``curl`` commands for fetching
 #. If using the ``gpg`` subcommand, ``gnupg2`` is required
 
 These requirements can be easily installed on most modern Linux systems;
-on macOS, XCode is required.  Spack is designed to run on HPC
-platforms like Cray.  Not all packages should be expected
+on Macintosh, XCode is required.  Spack is designed to run on HPC
+platforms like Cray and BlueGene/Q.  Not all packages should be expected
 to work on all platforms.  A build matrix showing which packages are
 working on which systems is planned but not yet available.
 
@@ -44,50 +41,39 @@ Getting Spack is easy.  You can clone it from the `github repository
 
 This will create a directory called ``spack``.
 
-.. _shell-support:
+^^^^^^^^^^^^^^^^^^^^^^^^
+Add Spack to the Shell
+^^^^^^^^^^^^^^^^^^^^^^^^
 
-^^^^^^^^^^^^^
-Shell support
-^^^^^^^^^^^^^
-
-Once you have cloned Spack, we recommend sourcing the appropriate script
-for your shell:
+We'll assume that the full path to your downloaded Spack directory is
+in the ``SPACK_ROOT`` environment variable.  Add ``$SPACK_ROOT/bin``
+to your path and you're ready to go:
 
 .. code-block:: console
 
-   # For bash/zsh/sh
-   $ . spack/share/spack/setup-env.sh
+   $ export PATH=$SPACK_ROOT/bin:$PATH
+   $ spack install libelf
 
-   # For tcsh/csh
-   $ source spack/share/spack/setup-env.csh
+For a richer experience, use Spack's shell support:
 
-   # For fish
-   $ . spack/share/spack/setup-env.fish
+.. code-block:: console
 
-That's it! You're ready to use Spack.
+   # For bash/zsh users
+   $ export SPACK_ROOT=/path/to/spack
+   $ . $SPACK_ROOT/share/spack/setup-env.sh
 
-Sourcing these files will put the ``spack`` command in your ``PATH``, set
-up your ``MODULEPATH`` to use Spack's packages, and add other useful
-shell integration for :ref:`certain commands <packaging-shell-support>`,
-:ref:`environments <environments>`, and :ref:`modules <modules>`. For
-``bash``, it also sets up tab completion.
-
-If you do not want to use Spack's shell support, you can always just run
-the ``spack`` command directly from ``spack/bin/spack``.
+   # For tcsh or csh users (note you must set SPACK_ROOT)
+   $ setenv SPACK_ROOT /path/to/spack
+   $ source $SPACK_ROOT/share/spack/setup-env.csh
 
 
-^^^^^^^^^^^^^^^^^^
-Check Installation
-^^^^^^^^^^^^^^^^^^
+This automatically adds Spack to your ``PATH`` and allows the ``spack``
+command to be used to execute spack :ref:`commands <shell-support>` and
+:ref:`useful packaging commands <packaging-shell-support>`.
 
-With Spack installed, you should be able to run some basic Spack
-commands.  For example:
-
-.. command-output:: spack spec netcdf-c
-
-In theory, Spack doesn't need any additional installation; just
-download and run!  But in real life, additional steps are usually
-required before Spack can work in a practical sense.  Read on...
+If :ref:`environment-modules <InstallEnvironmentModules>` is
+installed and available, the ``spack`` command can also load and unload
+:ref:`modules <modules>`.
 
 ^^^^^^^^^^^^^^^^^
 Clean Environment
@@ -103,52 +89,16 @@ environment*, especially for ``PATH``.  Only software that comes with
 the system, or that you know you wish to use with Spack, should be
 included.  This procedure will avoid many strange build errors.
 
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Optional: Bootstrapping clingo
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
-Spack supports using clingo as an external solver to compute which software
-needs to be installed. If you have a default compiler supporting C++14 Spack
-can automatically bootstrap this tool from sources the first time it is
-needed:
+^^^^^^^^^^^^^^^^^^
+Check Installation
+^^^^^^^^^^^^^^^^^^
 
-.. code-block:: console
+With Spack installed, you should be able to run some basic Spack
+commands.  For example:
 
-   $ spack solve zlib
-   [+] /usr (external bison-3.0.4-wu5pgjchxzemk5ya2l3ddqug2d7jv6eb)
-   [+] /usr (external cmake-3.19.4-a4kmcfzxxy45mzku4ipmj5kdiiz5a57b)
-   [+] /usr (external python-3.6.9-x4fou4iqqlh5ydwddx3pvfcwznfrqztv)
-   ==> Installing re2c-1.2.1-e3x6nxtk3ahgd63ykgy44mpuva6jhtdt
-   [ ... ]
-   ==> Optimization: [0, 0, 0, 0, 0, 1, 0, 0, 0]
-   zlib@1.2.11%gcc@10.1.0+optimize+pic+shared arch=linux-ubuntu18.04-broadwell
+.. command-output:: spack spec netcdf-c
 
-If you want to speed-up bootstrapping, you may try to search for ``cmake`` and ``bison``
-on your system:
-
-.. code-block:: console
-
-   $ spack external find cmake bison
-   ==> The following specs have been detected on this system and added to /home/spack/.spack/packages.yaml
-   bison@3.0.4  cmake@3.19.4
-
-All the tools Spack needs for its own functioning are installed in a separate store, which lives
-under the ``${HOME}/.spack`` directory. The software installed there can be queried with:
-
-.. code-block:: console
-
-   $ spack find --bootstrap
-   ==> Showing internal bootstrap store at "/home/spack/.spack/bootstrap/store"
-   ==> 3 installed packages
-   -- linux-ubuntu18.04-x86_64 / gcc@10.1.0 ------------------------
-   clingo-bootstrap@spack  python@3.6.9  re2c@1.2.1
-
-In case it's needed the bootstrap store can also be cleaned with:
-
-.. code-block:: console
-
-   $ spack clean -b
-   ==> Removing software in "/home/spack/.spack/bootstrap/store"
 
 ^^^^^^^^^^^^^^^^^^^^^^^^^^
 Optional: Alternate Prefix
@@ -168,6 +118,15 @@ copy of spack installs packages into its own ``$PREFIX/opt``
 directory.
 
 
+^^^^^^^^^^
+Next Steps
+^^^^^^^^^^
+
+In theory, Spack doesn't need any additional installation; just
+download and run!  But in real life, additional steps are usually
+required before Spack can work in a practical sense.  Read on...
+
+
 .. _compiler-config:
 
 ----------------------
@@ -523,7 +482,7 @@ Fortran.
           cxx: /usr/bin/clang++
           f77: /path/to/bin/gfortran
           fc: /path/to/bin/gfortran
-        spec: apple-clang@11.0.0
+        spec: clang@11.0.0-apple
 
 
    If you used Spack to install GCC, you can get the installation prefix by
@@ -757,9 +716,8 @@ an OpenMPI installed in /opt/local, one would use:
 
     packages:
         openmpi:
-            externals:
-            - spec: openmpi@1.10.1
-              prefix: /opt/local
+            paths:
+                openmpi@1.10.1: /opt/local
             buildable: False
 
 In general, Spack is easier to use and more reliable if it builds all of
@@ -821,9 +779,8 @@ Then add the following to ``~/.spack/packages.yaml``:
 
     packages:
         openssl:
-            externals:
-            - spec: openssl@1.0.2g
-              prefix: /usr
+            paths:
+                openssl@1.0.2g: /usr
             buildable: False
 
 
@@ -838,9 +795,8 @@ to add the following to ``packages.yaml``:
 
     packages:
         netlib-lapack:
-            externals:
-            - spec: netlib-lapack@3.6.1
-              prefix: /usr
+            paths:
+                netlib-lapack@3.6.1: /usr
             buildable: False
         all:
             providers:
@@ -866,7 +822,7 @@ Git
 
 Some Spack packages use ``git`` to download, which might not work on
 some computers.  For example, the following error was
-encountered on a Macintosh during ``spack install julia@master``:
+encountered on a Macintosh during ``spack install julia-master``:
 
 .. code-block:: console
 
@@ -895,7 +851,7 @@ from websites and from git.
 
 .. warning::
 
-   This workaround should be used ONLY as a last resort!  Without SSL
+   This workaround should be used ONLY as a last resort!  Wihout SSL
    certificate verification, spack and git will download from sites you
    wouldn't normally trust.  The code you download and run may then be
    compromised!  While this is not a major issue for archives that will
@@ -944,8 +900,9 @@ Core Spack Utilities
 ^^^^^^^^^^^^^^^^^^^^
 
 Core Spack uses the following packages, mainly to download and unpack
-source code: ``curl``, ``env``, ``git``, ``go``, ``hg``, ``svn``,
-``tar``, ``unzip``, ``patch``
+source code, and to load generated environment modules: ``curl``,
+``env``, ``git``, ``go``, ``hg``, ``svn``, ``tar``, ``unzip``,
+``patch``, ``environment-modules``.
 
 As long as the user's environment is set up to successfully run these
 programs from outside of Spack, they should work inside of Spack as
@@ -953,6 +910,10 @@ well.  They can generally be activated as in the ``curl`` example above;
 or some systems might already have an appropriate hand-built
 environment module that may be loaded.  Either way works.
 
+If you find that you are missing some of these programs, ``spack`` can
+build some of them for you with ``spack bootstrap``. Currently supported
+programs are ``environment-modules``.
+
 A few notes on specific programs in this list:
 
 """"""""""""""""""""""""""
@@ -980,6 +941,45 @@ other programs will also not work, because they also rely on OpenSSL.
 Once ``curl`` has been installed, you can similarly install the others.
 
 
+.. _InstallEnvironmentModules:
+
+"""""""""""""""""""
+Environment Modules
+"""""""""""""""""""
+
+In order to use Spack's generated module files, you must have
+installed ``environment-modules`` or ``lmod``. The simplest way
+to get the latest version of either of these tools is installing
+it as part of Spack's bootstrap procedure:
+
+.. code-block:: console
+
+   $ spack bootstrap
+
+.. warning::
+   At the moment ``spack bootstrap`` is only able to install ``environment-modules``.
+   Extending its capabilities to prefer ``lmod`` where possible is in the roadmap,
+   and likely to happen before the next release.
+
+Alternatively, on many Linux distributions, you can install a pre-built binary
+from the vendor's repository. On Fedora/RHEL/CentOS, for example, this can be
+done with the command:
+
+.. code-block:: console
+
+   $ yum install environment-modules
+
+Once you have the tool installed and available in your path, you can source
+Spack's setup file:
+
+.. code-block:: console
+
+   $ source share/spack/setup-env.sh
+
+This activates :ref:`shell support <shell-support>` and makes commands like
+``spack load`` available for use.
+
+
 ^^^^^^^^^^^^^^^^^
 Package Utilities
 ^^^^^^^^^^^^^^^^^
@@ -1229,13 +1229,9 @@ Here's an example of an external configuration for cray modules:
 
    packages:
      mpich:
-       externals:
-       - spec: "mpich@7.3.1%gcc@5.2.0 arch=cray_xc-haswell-CNL10"
-         modules:
-         - cray-mpich
-       - spec: "mpich@7.3.1%intel@16.0.0.109 arch=cray_xc-haswell-CNL10"
-         modules:
-         - cray-mpich
+       modules:
+         mpich@7.3.1%gcc@5.2.0 arch=cray_xc-haswell-CNL10: cray-mpich
+         mpich@7.3.1%intel@16.0.0.109 arch=cray_xc-haswell-CNL10: cray-mpich
      all:
        providers:
          mpi: [mpich]
@@ -1247,7 +1243,7 @@ via module load.
 
 .. note::
 
-    For Cray-provided packages, it is best to use ``modules:`` instead of ``prefix:``
+    For Cray-provided packages, it is best to use ``modules:`` instead of ``paths:``
     in ``packages.yaml``, because the Cray Programming Environment heavily relies on
     modules (e.g., loading the ``cray-mpich`` module adds MPI libraries to the
     compiler wrapper link line).
@@ -1263,31 +1259,19 @@ Here is an example of a full packages.yaml used at NERSC
 
    packages:
      mpich:
-       externals:
-       - spec: "mpich@7.3.1%gcc@5.2.0 arch=cray_xc-CNL10-ivybridge"
-         modules:
-         - cray-mpich
-       - spec: "mpich@7.3.1%intel@16.0.0.109 arch=cray_xc-SuSE11-ivybridge"
-         modules:
-         - cray-mpich
+       modules:
+         mpich@7.3.1%gcc@5.2.0 arch=cray_xc-CNL10-ivybridge: cray-mpich
+         mpich@7.3.1%intel@16.0.0.109 arch=cray_xc-SuSE11-ivybridge: cray-mpich
        buildable: False
      netcdf:
-       externals:
-       - spec: "netcdf@4.3.3.1%gcc@5.2.0 arch=cray_xc-CNL10-ivybridge"
-         modules:
-         - cray-netcdf
-       - spec: "netcdf@4.3.3.1%intel@16.0.0.109 arch=cray_xc-CNL10-ivybridge"
-         modules:
-         - cray-netcdf
+       modules:
+         netcdf@4.3.3.1%gcc@5.2.0 arch=cray_xc-CNL10-ivybridge: cray-netcdf
+         netcdf@4.3.3.1%intel@16.0.0.109 arch=cray_xc-CNL10-ivybridge: cray-netcdf
        buildable: False
      hdf5:
-       externals:
-       - spec: "hdf5@1.8.14%gcc@5.2.0 arch=cray_xc-CNL10-ivybridge"
-         modules:
-         - cray-hdf5
-       - spec: "hdf5@1.8.14%intel@16.0.0.109 arch=cray_xc-CNL10-ivybridge"
-         modules:
-         - cray-hdf5
+       modules:
+         hdf5@1.8.14%gcc@5.2.0 arch=cray_xc-CNL10-ivybridge: cray-hdf5
+         hdf5@1.8.14%intel@16.0.0.109 arch=cray_xc-CNL10-ivybridge: cray-hdf5
        buildable: False
      all:
        compiler: [gcc@5.2.0, intel@16.0.0.109]
@@ -1311,6 +1295,6 @@ environment variables may be propagated into containers that are not
 using the Cray programming environment.
 
 To ensure that Spack does not autodetect the Cray programming
-environment, unset the environment variable ``MODULEPATH``. This
+environment, unset the environment variable ``CRAYPE_VERSION``. This
 will cause Spack to treat a linux container on a Cray system as a base
 linux distro.

lib/spack/docs/index.rst

@@ -85,6 +85,7 @@ or refer to the full manual below.
    packaging_guide
    build_systems
    developer_guide
+   docker_for_developers
 
 .. toctree::
    :maxdepth: 2

lib/spack/docs/known_issues.rst

@@ -14,7 +14,7 @@ problems if you encounter them.
 Variants are not properly forwarded to dependencies
 ---------------------------------------------------
 
-**Status:** Expected to be fixed by Spack's new concretizer
+**Status:** Expected to be fixed in the next release
 
 Sometimes, a variant of a package can also affect how its dependencies are
 built. For example, in order to build MPI support for a package, it may
@@ -49,29 +49,15 @@ A workaround is to explicitly activate the variants of dependencies as well:
 See https://github.com/spack/spack/issues/267 and
 https://github.com/spack/spack/issues/2546 for further details.
 
------------------------------------------------
-depends_on cannot handle recursive dependencies
------------------------------------------------
 
-**Status:** Not yet a work in progress
+----------------------------
+``spack setup`` doesn't work
+----------------------------
 
-Although ``depends_on`` can handle any aspect of Spack's spec syntax,
-it currently cannot handle recursive dependencies. If the ``^`` sigil
-appears in a ``depends_on`` statement, the concretizer will hang.
-For example, something like:
+**Status:** Work in progress
 
-.. code-block:: python
-
-   depends_on('mfem+cuda ^hypre+cuda', when='+cuda')
-
-
-should be rewritten as:
-
-.. code-block:: python
-
-   depends_on('mfem+cuda', when='+cuda')
-   depends_on('hypre+cuda', when='+cuda')
-
-
-See https://github.com/spack/spack/issues/17660 and
-https://github.com/spack/spack/issues/11160 for more details.
+Spack provides a ``setup`` command that is useful for the development of
+software outside of Spack. Unfortunately, this command no longer works.
+See https://github.com/spack/spack/issues/2597 and
+https://github.com/spack/spack/issues/2662 for details. This is expected
+to be fixed by https://github.com/spack/spack/pull/2664.

lib/spack/docs/module_file_support.rst

@@ -10,25 +10,29 @@ Modules
 =======
 
 The use of module systems to manage user environment in a controlled way
-is a common practice at HPC centers that is often embraced also by
-individual programmers on their development machines. To support this
-common practice Spack integrates with `Environment Modules
-<http://modules.sourceforge.net/>`_ and `LMod
-<http://lmod.readthedocs.io/en/latest/>`_ by providing post-install hooks
-that generate module files and commands to manipulate them.
+is a common practice at HPC centers that is often embraced also by individual
+programmers on their development machines. To support this common practice
+Spack integrates with `Environment Modules
+<http://modules.sourceforge.net/>`_  and  `LMod
+<http://lmod.readthedocs.io/en/latest/>`_ by
+providing post-install hooks that generate module files and commands to manipulate them.
 
-Modules are one of several ways you can use Spack packages. For other
-options that may fit your use case better, you should also look at
-:ref:`spack load <spack-load>` and :ref:`environments <environments>`.
+.. note::
+
+   If your machine does not already have a module system installed,
+   we advise you to use either Environment Modules or LMod. See :ref:`InstallEnvironmentModules`
+   for more details.
+
+.. _shell-support:
 
 ----------------------------
 Using module files via Spack
 ----------------------------
 
-If you have installed a supported module system you should be able to
-run either ``module avail`` or ``use -l spack`` to see what module
-files have been installed.  Here is sample output of those programs,
-showing lots of installed packages:
+If you have installed a supported module system either manually or through
+``spack bootstrap``, you should be able to run either ``module avail`` or
+``use -l spack`` to see what module files have been installed.  Here is
+sample output of those programs, showing lots of installed packages:
 
 .. code-block:: console
 
@@ -62,9 +66,210 @@ to load the ``cmake`` module:
 
    $ module load cmake-3.7.2-gcc-6.3.0-fowuuby
 
-Neither of these is particularly pretty, easy to remember, or easy to
-type. Luckily, Spack offers many facilities for customizing the module
-scheme used at your site.
+Neither of these is particularly pretty, easy to remember, or
+easy to type. Luckily, Spack has its own interface for using modules.
+
+^^^^^^^^^^^^^
+Shell support
+^^^^^^^^^^^^^
+
+To enable additional Spack commands for loading and unloading module files,
+and to add the correct path to ``MODULEPATH``,  you need to source the appropriate
+setup file in the ``$SPACK_ROOT/share/spack`` directory. This will activate shell
+support for the commands that need it. For ``bash``, ``ksh`` or ``zsh`` users:
+
+.. code-block:: console
+
+   $ . ${SPACK_ROOT}/share/spack/setup-env.sh
+
+For ``csh`` and ``tcsh`` instead:
+
+.. code-block:: console
+
+   $ set SPACK_ROOT ...
+   $ source $SPACK_ROOT/share/spack/setup-env.csh
+
+Note that in the latter case it is necessary to explicitly set ``SPACK_ROOT``
+before sourcing the setup file (you will get a meaningful error message
+if you don't).
+
+When ``bash`` and ``ksh`` users update their environment with ``setup-env.sh``, it will check for spack-installed environment modules and add the ``module`` command to their environment; This only occurs if the module command is not already available. You can install ``environment-modules`` with ``spack bootstrap`` as described in :ref:`InstallEnvironmentModules`.
+
+Finally, if you want to have Spack's shell support available on the command line at
+any login you can put this source line in one of the files that are sourced
+at startup (like ``.profile``, ``.bashrc`` or ``.cshrc``). Be aware though
+that the startup time may be slightly increased because of that.
+
+
+.. _cmd-spack-load:
+
+^^^^^^^^^^^^^^^^^^^^^^^
+``spack load / unload``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Once you have shell support enabled you can use the same spec syntax
+you're used to and you can use the same shortened names you use
+everywhere else in Spack.
+
+For example this will add the ``mpich`` package built with ``gcc`` to your path:
+
+.. code-block:: console
+
+   $ spack install mpich %gcc@4.4.7
+
+   # ... wait for install ...
+
+   $ spack load mpich %gcc@4.4.7
+   $ which mpicc
+   ~/spack/opt/linux-debian7-x86_64/gcc@4.4.7/mpich@3.0.4/bin/mpicc
+
+These commands will add appropriate directories to your ``PATH``,
+``MANPATH``, ``CPATH``, and ``LD_LIBRARY_PATH``.  When you no longer
+want to use a package, you can type unload or unuse similarly:
+
+.. code-block:: console
+
+   $ spack unload mpich %gcc@4.4.7
+
+.. note::
+
+   The ``load`` and ``unload`` subcommands are only available if you
+   have enabled Spack's shell support. These command DO NOT use the
+   underlying Spack-generated module files.
+
+^^^^^^^^^^^^^^^
+Ambiguous specs
+^^^^^^^^^^^^^^^
+
+If a spec used with load/unload or is ambiguous (i.e. more than one
+installed package matches it), then Spack will warn you:
+
+.. code-block:: console
+
+   $ spack load libelf
+   ==> Error: libelf matches multiple packages.
+   Matching packages:
+     libelf@0.8.13%gcc@4.4.7 arch=linux-debian7-x86_64
+     libelf@0.8.13%intel@15.0.0 arch=linux-debian7-x86_64
+   Use a more specific spec
+
+You can either type the ``spack load`` command again with a fully
+qualified argument, or you can add just enough extra constraints to
+identify one package.  For example, above, the key differentiator is
+that one ``libelf`` is built with the Intel compiler, while the other
+used ``gcc``.  You could therefore just type:
+
+.. code-block:: console
+
+   $ spack load libelf %intel
+
+To identify just the one built with the Intel compiler.
+
+.. _extensions:
+
+.. _cmd-spack-module-loads:
+
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+``spack module tcl loads``
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+In some cases, it is desirable to use a Spack-generated module, rather
+than relying on Spack's built-in user-environment modification
+capabilities. To translate a spec into a module name, use ``spack
+module tcl loads`` or ``spack module lmod loads`` depending on the
+module system desired.
+
+
+To load not just a module, but also all the modules it depends on, use
+the ``--dependencies`` option. This is not required for most modules
+because Spack builds binaries with RPATH support.  However, not all
+packages use RPATH to find their dependencies: this can be true in
+particular for Python extensions, which are currently *not* built with
+RPATH.
+
+Scripts to load modules recursively may be made with the command:
+
+.. code-block:: console
+
+    $ spack module tcl loads --dependencies <spec>
+
+An equivalent alternative using `process substitution <http://tldp.org/LDP/abs/html/process-sub.html>`_ is:
+
+.. code-block :: console
+
+    $ source <( spack module tcl loads --dependencies <spec> )
+
+
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+Module Commands for Shell Scripts
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Although Spack is flexible, the ``module`` command is much faster.
+This could become an issue when emitting a series of ``spack load``
+commands inside a shell script.  By adding the ``--dependencies`` flag,
+``spack module tcl loads`` may also be used to generate code that can be
+cut-and-pasted into a shell script.  For example:
+
+.. code-block:: console
+
+    $ spack module tcl loads --dependencies py-numpy git
+    # bzip2@1.0.6%gcc@4.9.3=linux-x86_64
+    module load bzip2-1.0.6-gcc-4.9.3-ktnrhkrmbbtlvnagfatrarzjojmkvzsx
+    # ncurses@6.0%gcc@4.9.3=linux-x86_64
+    module load ncurses-6.0-gcc-4.9.3-kaazyneh3bjkfnalunchyqtygoe2mncv
+    # zlib@1.2.8%gcc@4.9.3=linux-x86_64
+    module load zlib-1.2.8-gcc-4.9.3-v3ufwaahjnviyvgjcelo36nywx2ufj7z
+    # sqlite@3.8.5%gcc@4.9.3=linux-x86_64
+    module load sqlite-3.8.5-gcc-4.9.3-a3eediswgd5f3rmto7g3szoew5nhehbr
+    # readline@6.3%gcc@4.9.3=linux-x86_64
+    module load readline-6.3-gcc-4.9.3-se6r3lsycrwxyhreg4lqirp6xixxejh3
+    # python@3.5.1%gcc@4.9.3=linux-x86_64
+    module load python-3.5.1-gcc-4.9.3-5q5rsrtjld4u6jiicuvtnx52m7tfhegi
+    # py-setuptools@20.5%gcc@4.9.3=linux-x86_64
+    module load py-setuptools-20.5-gcc-4.9.3-4qr2suj6p6glepnedmwhl4f62x64wxw2
+    # py-nose@1.3.7%gcc@4.9.3=linux-x86_64
+    module load py-nose-1.3.7-gcc-4.9.3-pwhtjw2dvdvfzjwuuztkzr7b4l6zepli
+    # openblas@0.2.17%gcc@4.9.3+shared=linux-x86_64
+    module load openblas-0.2.17-gcc-4.9.3-pw6rmlom7apfsnjtzfttyayzc7nx5e7y
+    # py-numpy@1.11.0%gcc@4.9.3+blas+lapack=linux-x86_64
+    module load py-numpy-1.11.0-gcc-4.9.3-mulodttw5pcyjufva4htsktwty4qd52r
+    # curl@7.47.1%gcc@4.9.3=linux-x86_64
+    module load curl-7.47.1-gcc-4.9.3-ohz3fwsepm3b462p5lnaquv7op7naqbi
+    # autoconf@2.69%gcc@4.9.3=linux-x86_64
+    module load autoconf-2.69-gcc-4.9.3-bkibjqhgqm5e3o423ogfv2y3o6h2uoq4
+    # cmake@3.5.0%gcc@4.9.3~doc+ncurses+openssl~qt=linux-x86_64
+    module load cmake-3.5.0-gcc-4.9.3-x7xnsklmgwla3ubfgzppamtbqk5rwn7t
+    # expat@2.1.0%gcc@4.9.3=linux-x86_64
+    module load expat-2.1.0-gcc-4.9.3-6pkz2ucnk2e62imwakejjvbv6egncppd
+    # git@2.8.0-rc2%gcc@4.9.3+curl+expat=linux-x86_64
+    module load git-2.8.0-rc2-gcc-4.9.3-3bib4hqtnv5xjjoq5ugt3inblt4xrgkd
+
+The script may be further edited by removing unnecessary modules.
+
+
+^^^^^^^^^^^^^^^
+Module Prefixes
+^^^^^^^^^^^^^^^
+
+On some systems, modules are automatically prefixed with a certain
+string; ``spack module tcl loads`` needs to know about that prefix when it
+issues ``module load`` commands.  Add the ``--prefix`` option to your
+``spack module tcl loads`` commands if this is necessary.
+
+For example, consider the following on one system:
+
+.. code-block:: console
+
+    $ module avail
+    linux-SuSE11-x86_64/antlr-2.7.7-gcc-5.3.0-bdpl46y
+
+    $ spack module tcl loads antlr    # WRONG!
+    # antlr@2.7.7%gcc@5.3.0~csharp+cxx~java~python arch=linux-SuSE11-x86_64
+    module load antlr-2.7.7-gcc-5.3.0-bdpl46y
+
+    $ spack module tcl loads --prefix linux-SuSE11-x86_64/ antlr
+    # antlr@2.7.7%gcc@5.3.0~csharp+cxx~java~python arch=linux-SuSE11-x86_64
+    module load linux-SuSE11-x86_64/antlr-2.7.7-gcc-5.3.0-bdpl46y
 
 -------------------------
 Module file customization
@@ -264,14 +469,14 @@ is compiled with ``gcc@4.4.7``, with the only exception of any ``gcc``
 or any ``llvm`` installation.
 
 
-.. _modules-projections:
+.. _modules-naming-scheme:
 
-"""""""""""""""""""""""""""""""
-Customize the naming of modules
-"""""""""""""""""""""""""""""""
+"""""""""""""""""""""""""""
+Customize the naming scheme
+"""""""""""""""""""""""""""
 
 The names of environment modules generated by spack are not always easy to
-fully comprehend due to the long hash in the name. There are three module
+fully comprehend due to the long hash in the name. There are two module
 configuration options to help with that. The first is a global setting to
 adjust the hash length. It can be set anywhere from 0 to 32 and has a default
 length of 7. This is the representation of the hash in the module file name and
@@ -305,46 +510,20 @@ version of python a set of python extensions is associated with. Likewise, the
 ``openblas`` string is attached to any program that has openblas in the spec,
 most likely via the ``+blas`` variant specification.
 
-The most heavyweight solution to module naming is to change the entire
-naming convention for module files. This uses the projections format
-covered in :ref:`adding_projections_to_views`.
-
-.. code-block:: yaml
-
-  modules:
-    tcl:
-      projections:
-        all: '{name}/{version}-{compiler.name}-{compiler.version}-module'
-        ^mpi: '{name}/{version}-{^mpi.name}-{^mpi.version}-{compiler.name}-{compiler.version}-module'
-
-will create module files that are nested in directories by package
-name, contain the version and compiler name and version, and have the
-word ``module`` before the hash for all specs that do not depend on
-mpi, and will have the same information plus the MPI implementation
-name and version for all packages that depend on mpi.
-
-When specifying module names by projection for Lmod modules, we
-recommend NOT including names of dependencies (e.g., MPI, compilers)
-that are already in the LMod hierarchy.
-
-
-
 .. note::
-   TCL modules
-     TCL modules also allow for explicit conflicts between modulefiles.
+   TCL module files
+     A modification that is specific to ``tcl`` module files is the possibility
+     to change the naming scheme of modules.
 
      .. code-block:: yaml
 
-        modules:
-          enable:
-            - tcl
-          tcl:
-            projections:
-              all: '{name}/{version}-{compiler.name}-{compiler.version}'
-            all:
-              conflict:
-                - '{name}'
-                - 'intel/14.0.1'
+       modules:
+         tcl:
+           naming_scheme: '{name}/{version}-{compiler.name}-{compiler.version}'
+           all:
+             conflict:
+               - '{name}'
+               - 'intel/14.0.1'
 
      will create module files that will conflict with ``intel/14.0.1`` and with the
      base directory of the same module, effectively preventing the possibility to
@@ -369,8 +548,6 @@ that are already in the LMod hierarchy.
          lmod:
            core_compilers:
              - 'gcc@4.8'
-           core_specs:
-             - 'python'
            hierarchy:
              - 'mpi'
              - 'lapack'
@@ -380,46 +557,11 @@ that are already in the LMod hierarchy.
      implementations of ``mpi`` and ``lapack``, and let LMod switch safely from one to the
      other.
 
-     All packages built with a compiler in ``core_compilers`` and all
-     packages that satisfy a spec in ``core_specs`` will be put in the
-     ``Core`` hierarchy of the lua modules.
-
-.. warning::
-  Consistency of Core packages
-   The user is responsible for maintining consistency among core packages, as ``core_specs``
-   bypasses the hierarchy that allows LMod to safely switch between coherent software stacks.
-
 .. warning::
   Deep hierarchies and ``lmod spider``
    For hierarchies that are deeper than three layers ``lmod spider`` may have some issues.
    See `this discussion on the LMod project <https://github.com/TACC/Lmod/issues/114>`_.
 
-.. _customize-env-modifications:
-
-"""""""""""""""""""""""""""""""""""
-Customize environment modifications
-"""""""""""""""""""""""""""""""""""
-
-You can control which prefixes in a Spack package are added to environment
-variables with the ``prefix_inspections`` section; this section maps relative
-prefixes to the list of environment variables which should be updated with
-those prefixes.
-
-.. code-block:: yaml
-
-  modules:
-    prefix_inspections:
-      bin:
-        - PATH
-      lib:
-        - LIBRARY_PATH
-      '':
-        - CMAKE_PREFIX_PATH
-
-In this case, for a Spack package ``foo`` installed to ``/spack/prefix/foo``,
-the generated module file for ``foo`` would update ``PATH`` to contain
-``/spack/prefix/foo/bin``.
-
 """"""""""""""""""""""""""""""""""""
 Filter out environment modifications
 """"""""""""""""""""""""""""""""""""
@@ -528,135 +670,3 @@ subcommand is ``rm``:
    that are already existing will ask for a confirmation by default. If
    the command is used in a script it is possible though to pass the
    ``-y`` argument, that will skip this safety measure.
-
-
-.. _modules-in-shell-scripts:
-
-------------------------------------
-Using Spack modules in shell scripts
-------------------------------------
-
-The easiest To enable additional Spack commands for loading and unloading
-module files, and to add the correct path to ``MODULEPATH``, you need to
-source the appropriate setup file. Assuming Spack is installed in
-``$SPACK_ROOT``, run the appropriate command for your shell:
-
-.. code-block:: console
-
-   # For bash/zsh/sh
-   $ . $SPACK_ROOT/share/spack/setup-env.sh
-
-   # For tcsh/csh
-   $ source $SPACK_ROOT/share/spack/setup-env.csh
-
-   # For fish
-   $ . $SPACK_ROOT/share/spack/setup-env.fish
-
-If you want to have Spack's shell support available on the command line
-at any login you can put this source line in one of the files that are
-sourced at startup (like ``.profile``, ``.bashrc`` or ``.cshrc``). Be
-aware that the shell startup time may increase slightly as a result.
-
-.. _cmd-spack-module-loads:
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^
-``spack module tcl loads``
-^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-In some cases, it is desirable to use a Spack-generated module, rather
-than relying on Spack's built-in user-environment modification
-capabilities. To translate a spec into a module name, use ``spack
-module tcl loads`` or ``spack module lmod loads`` depending on the
-module system desired.
-
-
-To load not just a module, but also all the modules it depends on, use
-the ``--dependencies`` option. This is not required for most modules
-because Spack builds binaries with RPATH support.  However, not all
-packages use RPATH to find their dependencies: this can be true in
-particular for Python extensions, which are currently *not* built with
-RPATH.
-
-Scripts to load modules recursively may be made with the command:
-
-.. code-block:: console
-
-    $ spack module tcl loads --dependencies <spec>
-
-An equivalent alternative using `process substitution <http://tldp.org/LDP/abs/html/process-sub.html>`_ is:
-
-.. code-block:: console
-
-    $ source <( spack module tcl loads --dependencies <spec> )
-
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Module Commands for Shell Scripts
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Although Spack is flexible, the ``module`` command is much faster.
-This could become an issue when emitting a series of ``spack load``
-commands inside a shell script.  By adding the ``--dependencies`` flag,
-``spack module tcl loads`` may also be used to generate code that can be
-cut-and-pasted into a shell script.  For example:
-
-.. code-block:: console
-
-    $ spack module tcl loads --dependencies py-numpy git
-    # bzip2@1.0.6%gcc@4.9.3=linux-x86_64
-    module load bzip2-1.0.6-gcc-4.9.3-ktnrhkrmbbtlvnagfatrarzjojmkvzsx
-    # ncurses@6.0%gcc@4.9.3=linux-x86_64
-    module load ncurses-6.0-gcc-4.9.3-kaazyneh3bjkfnalunchyqtygoe2mncv
-    # zlib@1.2.8%gcc@4.9.3=linux-x86_64
-    module load zlib-1.2.8-gcc-4.9.3-v3ufwaahjnviyvgjcelo36nywx2ufj7z
-    # sqlite@3.8.5%gcc@4.9.3=linux-x86_64
-    module load sqlite-3.8.5-gcc-4.9.3-a3eediswgd5f3rmto7g3szoew5nhehbr
-    # readline@6.3%gcc@4.9.3=linux-x86_64
-    module load readline-6.3-gcc-4.9.3-se6r3lsycrwxyhreg4lqirp6xixxejh3
-    # python@3.5.1%gcc@4.9.3=linux-x86_64
-    module load python-3.5.1-gcc-4.9.3-5q5rsrtjld4u6jiicuvtnx52m7tfhegi
-    # py-setuptools@20.5%gcc@4.9.3=linux-x86_64
-    module load py-setuptools-20.5-gcc-4.9.3-4qr2suj6p6glepnedmwhl4f62x64wxw2
-    # py-nose@1.3.7%gcc@4.9.3=linux-x86_64
-    module load py-nose-1.3.7-gcc-4.9.3-pwhtjw2dvdvfzjwuuztkzr7b4l6zepli
-    # openblas@0.2.17%gcc@4.9.3+shared=linux-x86_64
-    module load openblas-0.2.17-gcc-4.9.3-pw6rmlom7apfsnjtzfttyayzc7nx5e7y
-    # py-numpy@1.11.0%gcc@4.9.3+blas+lapack=linux-x86_64
-    module load py-numpy-1.11.0-gcc-4.9.3-mulodttw5pcyjufva4htsktwty4qd52r
-    # curl@7.47.1%gcc@4.9.3=linux-x86_64
-    module load curl-7.47.1-gcc-4.9.3-ohz3fwsepm3b462p5lnaquv7op7naqbi
-    # autoconf@2.69%gcc@4.9.3=linux-x86_64
-    module load autoconf-2.69-gcc-4.9.3-bkibjqhgqm5e3o423ogfv2y3o6h2uoq4
-    # cmake@3.5.0%gcc@4.9.3~doc+ncurses+openssl~qt=linux-x86_64
-    module load cmake-3.5.0-gcc-4.9.3-x7xnsklmgwla3ubfgzppamtbqk5rwn7t
-    # expat@2.1.0%gcc@4.9.3=linux-x86_64
-    module load expat-2.1.0-gcc-4.9.3-6pkz2ucnk2e62imwakejjvbv6egncppd
-    # git@2.8.0-rc2%gcc@4.9.3+curl+expat=linux-x86_64
-    module load git-2.8.0-rc2-gcc-4.9.3-3bib4hqtnv5xjjoq5ugt3inblt4xrgkd
-
-The script may be further edited by removing unnecessary modules.
-
-
-^^^^^^^^^^^^^^^
-Module Prefixes
-^^^^^^^^^^^^^^^
-
-On some systems, modules are automatically prefixed with a certain
-string; ``spack module tcl loads`` needs to know about that prefix when it
-issues ``module load`` commands.  Add the ``--prefix`` option to your
-``spack module tcl loads`` commands if this is necessary.
-
-For example, consider the following on one system:
-
-.. code-block:: console
-
-    $ module avail
-    linux-SuSE11-x86_64/antlr-2.7.7-gcc-5.3.0-bdpl46y
-
-    $ spack module tcl loads antlr    # WRONG!
-    # antlr@2.7.7%gcc@5.3.0~csharp+cxx~java~python arch=linux-SuSE11-x86_64
-    module load antlr-2.7.7-gcc-5.3.0-bdpl46y
-
-    $ spack module tcl loads --prefix linux-SuSE11-x86_64/ antlr
-    # antlr@2.7.7%gcc@5.3.0~csharp+cxx~java~python arch=linux-SuSE11-x86_64
-    module load linux-SuSE11-x86_64/antlr-2.7.7-gcc-5.3.0-bdpl46y

lib/spack/docs/package_list.rst

@@ -10,8 +10,8 @@ Package List
 ============
 
 This is a list of things you can install using Spack.  It is
-automatically generated based on the packages in this Spack
-version.
+automatically generated based on the packages in the latest Spack
+release.
 
 .. raw:: html
    :file: package_list.html

lib/spack/docs/packaging_guide.rst

@@ -645,7 +645,7 @@ multiple fields based on delimiters such as ``.``, ``-`` etc. Then
 matching fields are compared using the rules below:
 
 #. The following develop-like strings are greater (newer) than all
-   numbers and are ordered as ``develop > main > master > head > trunk``.
+   numbers and are ordered as ``develop > master > head > trunk``.
 
 #. Numbers are all less than the chosen develop-like strings above,
    and are sorted numerically.
@@ -1675,15 +1675,15 @@ can see the patches that would be applied to ``m4``::
 
   Concretized
   --------------------------------
-  m4@1.4.18%apple-clang@9.0.0 patches=3877ab548f88597ab2327a2230ee048d2d07ace1062efe81fc92e91b7f39cd00,c0a408fbffb7255fcc75e26bd8edab116fc81d216bfd18b473668b7739a4158e,fc9b61654a3ba1a8d6cd78ce087e7c96366c290bc8d2c299f09828d793b853c8 +sigsegv arch=darwin-highsierra-x86_64
-      ^libsigsegv@2.11%apple-clang@9.0.0 arch=darwin-highsierra-x86_64
+  m4@1.4.18%clang@9.0.0-apple patches=3877ab548f88597ab2327a2230ee048d2d07ace1062efe81fc92e91b7f39cd00,c0a408fbffb7255fcc75e26bd8edab116fc81d216bfd18b473668b7739a4158e,fc9b61654a3ba1a8d6cd78ce087e7c96366c290bc8d2c299f09828d793b853c8 +sigsegv arch=darwin-highsierra-x86_64
+      ^libsigsegv@2.11%clang@9.0.0-apple arch=darwin-highsierra-x86_64
 
 You can also see patches that have been applied to installed packages
 with ``spack find -v``::
 
   $ spack find -v m4
   ==> 1 installed package
-  -- darwin-highsierra-x86_64 / apple-clang@9.0.0 -----------------
+  -- darwin-highsierra-x86_64 / clang@9.0.0-apple -----------------
   m4@1.4.18 patches=3877ab548f88597ab2327a2230ee048d2d07ace1062efe81fc92e91b7f39cd00,c0a408fbffb7255fcc75e26bd8edab116fc81d216bfd18b473668b7739a4158e,fc9b61654a3ba1a8d6cd78ce087e7c96366c290bc8d2c299f09828d793b853c8 +sigsegv
 
 .. _cmd-spack-resource:
@@ -1713,7 +1713,7 @@ wonder where the extra boost patches are coming from::
 
   $ spack spec dealii ^boost@1.68.0 ^hdf5+fortran | grep '\^boost'
       ^boost@1.68.0
-          ^boost@1.68.0%apple-clang@9.0.0+atomic+chrono~clanglibcpp cxxstd=default +date_time~debug+exception+filesystem+graph~icu+iostreams+locale+log+math~mpi+multithreaded~numpy patches=2ab6c72d03dec6a4ae20220a9dfd5c8c572c5294252155b85c6874d97c323199,b37164268f34f7133cbc9a4066ae98fda08adf51e1172223f6a969909216870f ~pic+program_options~python+random+regex+serialization+shared+signals~singlethreaded+system~taggedlayout+test+thread+timer~versionedlayout+wave arch=darwin-highsierra-x86_64
+          ^boost@1.68.0%clang@9.0.0-apple+atomic+chrono~clanglibcpp cxxstd=default +date_time~debug+exception+filesystem+graph~icu+iostreams+locale+log+math~mpi+multithreaded~numpy patches=2ab6c72d03dec6a4ae20220a9dfd5c8c572c5294252155b85c6874d97c323199,b37164268f34f7133cbc9a4066ae98fda08adf51e1172223f6a969909216870f ~pic+program_options~python+random+regex+serialization+shared+signals~singlethreaded+system~taggedlayout+test+thread+timer~versionedlayout+wave arch=darwin-highsierra-x86_64
   $ spack resource show b37164268
   b37164268f34f7133cbc9a4066ae98fda08adf51e1172223f6a969909216870f
       path:       /home/spackuser/src/spack/var/spack/repos/builtin/packages/dealii/boost_1.68.0.patch
@@ -1778,18 +1778,8 @@ RPATHs in Spack are handled in one of three ways:
 Parallel builds
 ---------------
 
-Spack supports parallel builds on an individual package and at the
-installation level.  Package-level parallelism is established by the
-``--jobs`` option and its configuration and package recipe equivalents.
-Installation-level parallelism is driven by the DAG(s) of the requested
-package or packages.
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Package-level build parallelism
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
 By default, Spack will invoke ``make()``, or any other similar tool,
-with a ``-j <njobs>`` argument, so those builds run in parallel.
+with a ``-j <njobs>`` argument, so that builds run in parallel.
 The parallelism is determined by the value of the ``build_jobs`` entry
 in ``config.yaml`` (see :ref:`here <build-jobs>` for more details on
 how this value is computed).
@@ -1837,43 +1827,6 @@ you set ``parallel`` to ``False`` at the package level, then each call
 to ``make()`` will be sequential by default, but packagers can call
 ``make(parallel=True)`` to override it.
 
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Install-level build parallelism
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Spack supports the concurrent installation of packages within a Spack
-instance across multiple processes using file system locks.  This
-parallelism is separate from the package-level achieved through build
-systems' use of the ``-j <njobs>`` option.  With install-level parallelism,
-processes coordinate the installation of the dependencies of specs
-provided on the command line and as part of an environment build with
-only **one process** being allowed to install a given package at a time.
-Refer to :ref:`Dependencies` for more information on dependencies and
-:ref:`installing-environment` for how to install an environment.
-
-Concurrent processes may be any combination of interactive sessions and
-batch jobs.  Which means a ``spack install`` can be running in a terminal
-window while a batch job is running ``spack install`` on the same or
-overlapping dependencies without any process trying to re-do the work of
-another.
-
-For example, if you are using SLURM, you could launch an installation
-of ``mpich`` using the following command:
-
-.. code-block:: console
-
-   $ srun -N 2 -n 8 spack install -j 4 mpich@3.3.2
-
-This will create eight concurrent four-job installation on two different
-nodes.
-
-.. note::
-
-   The effective parallelism will be based on the maximum number of
-   packages that can be installed at the same time, which will limited
-   by the number of packages with no (remaining) uninstalled dependencies.
-
-
 .. _dependencies:
 
 ------------
@@ -2014,29 +1967,22 @@ exactly what kind of a dependency you need. For example:
    depends_on('cmake', type='build')
    depends_on('py-numpy', type=('build', 'run'))
    depends_on('libelf', type=('build', 'link'))
-   depends_on('py-pytest', type='test')
 
 The following dependency types are available:
 
-* **"build"**: the dependency will be added to the ``PATH`` and
-  ``PYTHONPATH`` at build-time.
-* **"link"**: the dependency will be added to Spack's compiler
-  wrappers, automatically injecting the appropriate linker flags,
-  including ``-I``, ``-L``, and RPATH/RUNPATH handling.
-* **"run"**: the dependency will be added to the ``PATH`` and
-  ``PYTHONPATH`` at run-time. This is true for both ``spack load``
-  and the module files Spack writes.
-* **"test"**: the dependency will be added to the ``PATH`` and
-  ``PYTHONPATH`` at build-time. The only difference between
-  "build" and "test" is that test dependencies are only built
-  if the user requests unit tests with ``spack install --test``.
+* **"build"**: made available during the project's build. The package will
+  be added to ``PATH``, the compiler include paths, and ``PYTHONPATH``.
+  Other projects which depend on this one will not have these modified
+  (building project X doesn't need project Y's build dependencies).
+* **"link"**: the project is linked to by the project. The package will be
+  added to the current package's ``rpath``.
+* **"run"**: the project is used by the project at runtime. The package will
+  be added to ``PATH`` and ``PYTHONPATH``.
 
 One of the advantages of the ``build`` dependency type is that although the
 dependency needs to be installed in order for the package to be built, it
 can be uninstalled without concern afterwards. ``link`` and ``run`` disallow
-this because uninstalling the dependency would break the package. Another
-consequence of this is that ``build``-only dependencies do not affect the
-hash of the package. The same is true for ``test`` dependencies.
+this because uninstalling the dependency would break the package.
 
 If the dependency type is not specified, Spack uses a default of
 ``('build', 'link')``. This is the common case for compiler languages.
@@ -2057,8 +2003,7 @@ package. In that case, you could say something like:
 
 .. code-block:: python
 
-   variant('mpi', default=False, description='Enable MPI support')
-
+   variant('mpi', default=False)
    depends_on('mpi', when='+mpi')
 
 ``when`` can include constraints on the variant, version, compiler, etc. and
@@ -2224,17 +2169,13 @@ Adding the following to a package:
 
 .. code-block:: python
 
-    conflicts('%intel', when='@:1.2',
-              msg='<myNicePackage> <= v1.2 cannot be built with Intel ICC, '
-                  'please use a newer release.')
+    conflicts('%intel', when='@1.2')
 
 we express the fact that the current package *cannot be built* with the Intel
-compiler when we are trying to install a version "<=1.2". The ``when`` argument
-can be omitted, in which case the conflict will always be active.
+compiler when we are trying to install version "1.2". The ``when`` argument can
+be omitted, in which case the conflict will always be active.
 Conflicts are always evaluated after the concretization step has been performed,
 and if any match is found a detailed error message is shown to the user.
-You can add an additional message via the ``msg=`` parameter to a conflict that
-provideds more specific instructions for users.
 
 .. _packaging_extensions:
 
@@ -2256,7 +2197,7 @@ property to ``True``, e.g.:
        extendable = True
        ...
 
-To make a package into an extension, simply add an
+To make a package into an extension, simply add simply add an
 ``extends`` call in the package definition, and pass it the name of an
 extendable package:
 
@@ -2271,10 +2212,6 @@ Now, the ``py-numpy`` package can be used as an argument to ``spack
 activate``.  When it is activated, all the files in its prefix will be
 symbolically linked into the prefix of the python package.
 
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Adding additional constraints
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
 Some packages produce a Python extension, but are only compatible with
 Python 3, or with Python 2.  In those cases, a ``depends_on()``
 declaration should be made in addition to the ``extends()``
@@ -2294,7 +2231,8 @@ variant(s) are selected.  This may be accomplished with conditional
 .. code-block:: python
 
    class FooLib(Package):
-       variant('python', default=True, description='Build the Python extension Module')
+       variant('python', default=True, description= \
+           'Build the Python extension Module')
        extends('python', when='+python')
        ...
 
@@ -2975,7 +2913,7 @@ discover its dependencies.
 
 If you want to see the environment that a package will build with, or
 if you want to run commands in that environment to test them out, you
-can use the :ref:`cmd-spack-build-env` command, documented
+can use the :ref:`cmd-spack-env` command, documented
 below.
 
 ^^^^^^^^^^^^^^^^^^^^^
@@ -3163,7 +3101,7 @@ differ from package to package. In order to make the ``install()`` method
 independent of the choice of ``Blas`` implementation, each package which
 provides it implements ``@property def blas_libs(self):`` to return an object
 of
-`LibraryList <https://spack.readthedocs.io/en/latest/llnl.util.html#llnl.util.filesystem.LibraryList>`_
+`LibraryList <http://spack.readthedocs.io/en/latest/llnl.util.html#llnl.util.filesystem.LibraryList>`_
 type which simplifies usage of a set of libraries.
 The same applies to packages which provide ``Lapack`` and ``ScaLapack``.
 Package developers are requested to use this interface. Common usage cases are:
@@ -3198,7 +3136,7 @@ Package developers are requested to use this interface. Common usage cases are:
 
 
 For more information, see documentation of
-`LibraryList <https://spack.readthedocs.io/en/latest/llnl.util.html#llnl.util.filesystem.LibraryList>`_
+`LibraryList <http://spack.readthedocs.io/en/latest/llnl.util.html#llnl.util.filesystem.LibraryList>`_
 class.
 
 
@@ -3669,7 +3607,7 @@ the command line.
     For most compilers, ``$rpath_flag`` is ``-Wl,-rpath,``. However, NAG
     passes its flags to GCC instead of passing them directly to the linker.
     Therefore, its ``$rpath_flag`` is doubly wrapped: ``-Wl,-Wl,,-rpath,``.
-    ``$rpath_flag`` can be overridden on a compiler specific basis in
+    ``$rpath_flag`` can be overriden on a compiler specific basis in
     ``lib/spack/spack/compilers/$compiler.py``.
 
 The compiler wrappers also pass the compiler flags specified by the user from
@@ -3948,118 +3886,6 @@ using the ``run_before`` decorator.
 
 .. _file-manipulation:
 
-^^^^^^^^^^^^^
-Install Tests
-^^^^^^^^^^^^^
-
-.. warning::
-
-   The API for adding and running install tests is not yet considered
-   stable and may change drastically in future releases. Packages with
-   upstreamed tests will be refactored to match changes to the API.
-
-While build-tests are integrated with the build system, install tests
-may be added to Spack packages to be run independently of the install
-method.
-
-Install tests may be added by defining a ``test`` method with the following signature:
-
-.. code-block:: python
-
-   def test(self):
-
-These tests will be run in an environment set up to provide access to
-this package and all of its dependencies, including ``test``-type
-dependencies. Inside the ``test`` method, standard python ``assert``
-statements and other error reporting mechanisms can be used. Spack
-will report any errors as a test failure.
-
-Inside the test method, individual tests can be run separately (and
-continue transparently after a test failure) using the ``run_test``
-method. The signature for the ``run_test`` method is:
-
-.. code-block:: python
-
-   def run_test(self, exe, options=[], expected=[], status=0, installed=False,
-                purpose='', skip_missing=False, work_dir=None):
-
-This method will operate in ``work_dir`` if one is specified. It will
-search for an executable in the ``PATH`` variable named ``exe``, and
-if ``installed=True`` it will fail if that executable does not come
-from the prefix of the package being tested. If the executable is not
-found, it will fail the test unless ``skip_missing`` is set to
-``True``. The executable will be run with the options specified, and
-the return code will be checked against the ``status`` argument, which
-can be an integer or list of integers. Spack will also check that
-every string in ``expected`` is a regex matching part of the output of
-the executable. The ``purpose`` argument is recorded in the test log
-for debugging purposes.
-
-""""""""""""""""""""""""""""""""""""""
-Install tests that require compilation
-""""""""""""""""""""""""""""""""""""""
-
-Some tests may require access to the compiler with which the package
-was built, especially to test library-only packages. To ensure the
-compiler is configured as part of the test environment, set the
-attribute ``tests_require_compiler = True`` on the package. The
-compiler will be available through the canonical environment variables
-(``CC``, ``CXX``, ``FC``, ``F77``) in the test environment.
-
-""""""""""""""""""""""""""""""""""""""""""""""""
-Install tests that require build-time components
-""""""""""""""""""""""""""""""""""""""""""""""""
-
-Some packages cannot be easily tested without components from the
-build-time test suite. For those packages, the
-``cache_extra_test_sources`` method can be used.
-
-.. code-block:: python
-
-   @run_after('install')
-   def cache_test_sources(self):
-       srcs = ['./tests/foo.c', './tests/bar.c']
-       self.cache_extra_test_sources(srcs)
-
-This method will copy the listed methods into the metadata directory
-of the package at the end of the install phase of the build. They will
-be available to the test method in the directory
-``self._extra_tests_path``.
-
-While source files are generally recommended, for many packages
-binaries may also technically be cached in this way for later testing.
-
-"""""""""""""""""""""
-Running install tests
-"""""""""""""""""""""
-
-Install tests can be run using the ``spack test run`` command. The
-``spack test run`` command will create a ``test suite`` out of the
-specs provided to it, or if no specs are provided it will test all
-specs in the active environment, or all specs installed in Spack if no
-environment is active. Test suites can be named using the ``--alias``
-option; test suites not aliased will use the content hash of their
-specs as their name.
-
-Packages to install test can be queried using the ``spack test list``
-command, which outputs all installed packages with defined ``test``
-methods.
-
-Test suites can be found using the ``spack test find`` command. It
-will list all test suites that have been run and have not been removed
-using the ``spack test remove`` command. The ``spack test remove``
-command will remove tests to declutter the test stage. The ``spack
-test results`` command will show results for completed test suites.
-
-The test stage is the working directory for all install tests run with
-Spack. By default, Spack uses ``~/.spack/test`` as the test stage. The
-test stage can be set in the high-level config:
-
-.. code-block:: yaml
-
-   config:
-     test_stage: /path/to/stage
-
 ---------------------------
 File manipulation functions
 ---------------------------
@@ -4215,273 +4041,6 @@ File functions
 :py:func:`touch(path) <spack.touch>`
   Create an empty file at ``path``.
 
-.. _make-package-findable:
-
-----------------------------------------------------------
-Making a package discoverable with ``spack external find``
-----------------------------------------------------------
-
-The simplest way to make a package discoverable with
-:ref:`spack external find <cmd-spack-external-find>` is to:
-
-1. Define the executables associated with the package
-2. Implement a method to determine the versions of these executables
-
-^^^^^^^^^^^^^^^^^
-Minimal detection
-^^^^^^^^^^^^^^^^^
-
-The first step is fairly simple, as it requires only to
-specify a package level ``executables`` attribute:
-
-.. code-block:: python
-
-   class Foo(Package):
-       # Each string provided here is treated as a regular expression, and
-       # would match for example 'foo', 'foobar', and 'bazfoo'.
-       executables = ['foo']
-
-This attribute must be a list of strings. Each string is a regular
-expression (e.g. 'gcc' would match 'gcc', 'gcc-8.3', 'my-weird-gcc', etc.) to
-determine a set of system executables that might be part or this package. Note
-that to match only executables named 'gcc' the regular expression ``'^gcc$'``
-must be used.
-
-Finally to determine the version of each executable the ``determine_version``
-method must be implemented:
-
-.. code-block:: python
-
-   @classmethod
-   def determine_version(cls, exe):
-       """Return either the version of the executable passed as argument
-       or ``None`` if the version cannot be determined.
-
-       Args:
-           exe (str): absolute path to the executable being examined
-       """
-
-This method receives as input the path to a single executable and must return
-as output its version as a string; if the user cannot determine the version
-or determines that the executable is not an instance of the package, they can
-return None and the exe will be discarded as a candidate.
-Implementing the two steps above is mandatory, and gives the package the
-basic ability to detect if a spec is present on the system at a given version.
-
-.. note::
-   Any executable for which the ``determine_version`` method returns ``None``
-   will be discarded and won't appear in later stages of the workflow described below.
-
-^^^^^^^^^^^^^^^^^^^^^^^^
-Additional functionality
-^^^^^^^^^^^^^^^^^^^^^^^^
-
-Besides the two mandatory steps described above, there are also optional
-methods that can be implemented to either increase the amount of details
-being detected or improve the robustness of the detection logic in a package.
-
-""""""""""""""""""""""""""""""
-Variants and custom attributes
-""""""""""""""""""""""""""""""
-
-The ``determine_variants`` method can be optionally implemented in a package
-to detect additional details of the spec:
-
-.. code-block:: python
-
-   @classmethod
-   def determine_variants(cls, exes, version_str):
-       """Return either a variant string, a tuple of a variant string
-       and a dictionary of extra attributes that will be recorded in
-       packages.yaml or a list of those items.
-
-       Args:
-           exes (list of str): list of executables (absolute paths) that
-               live in the same prefix and share the same version
-           version_str (str): version associated with the list of
-               executables, as detected by ``determine_version``
-       """
-
-This method takes as input a list of executables that live in the same prefix and
-share the same version string, and returns either:
-
-1. A variant string
-2. A tuple of a variant string and a dictionary of extra attributes
-3. A list of items matching either 1 or 2 (if multiple specs are detected
-   from the set of executables)
-
-If extra attributes are returned, they will be recorded in ``packages.yaml``
-and be available for later reuse. As an example, the ``gcc`` package will record
-by default the different compilers found and an entry in ``packages.yaml``
-would look like:
-
-.. code-block:: yaml
-
-   packages:
-     gcc:
-       externals:
-       - spec: 'gcc@9.0.1 languages=c,c++,fortran'
-         prefix: /usr
-         extra_attributes:
-           compilers:
-             c: /usr/bin/x86_64-linux-gnu-gcc-9
-             c++: /usr/bin/x86_64-linux-gnu-g++-9
-             fortran: /usr/bin/x86_64-linux-gnu-gfortran-9
-
-This allows us, for instance, to keep track of executables that would be named
-differently if built by Spack (e.g. ``x86_64-linux-gnu-gcc-9``
-instead of just ``gcc``).
-
-.. TODO: we need to gather some more experience on overriding 'prefix'
-   and other special keywords in extra attributes, but as soon as we are
-   confident that this is the way to go we should document the process.
-   See https://github.com/spack/spack/pull/16526#issuecomment-653783204
-
-"""""""""""""""""""""""""""
-Filter matching executables
-"""""""""""""""""""""""""""
-
-Sometimes defining the appropriate regex for the ``executables``
-attribute might prove to be difficult, especially if one has to
-deal with corner cases or exclude "red herrings". To help keeping
-the regular expressions as simple as possible, each package can
-optionally implement a ``filter_executables`` method:
-
-.. code-block:: python
-
-    @classmethod
-    def filter_detected_exes(cls, prefix, exes_in_prefix):
-        """Return a filtered list of the executables in prefix"""
-
-which takes as input a prefix and a list of matching executables and
-returns a filtered list of said executables.
-
-Using this method has the advantage of allowing custom logic for
-filtering, and does not restrict the user to regular expressions
-only.  Consider the case of detecting the GNU C++ compiler. If we
-try to search for executables that match ``g++``, that would have
-the unwanted side effect of selecting also ``clang++`` - which is
-a C++ compiler provided by another package - if present on the system.
-Trying to select executables that contain ``g++`` but not ``clang``
-would be quite complicated to do using regex only. Employing the
-``filter_detected_exes`` method it becomes:
-
-.. code-block:: python
-
-   class Gcc(Package):
-      executables = ['g++']
-
-      def filter_detected_exes(cls, prefix, exes_in_prefix):
-         return [x for x in exes_in_prefix if 'clang' not in x]
-
-Another possibility that this method opens is to apply certain
-filtering logic when specific conditions are met (e.g. take some
-decisions on an OS and not on another).
-
-^^^^^^^^^^^^^^^^^^
-Validate detection
-^^^^^^^^^^^^^^^^^^
-
-To increase detection robustness, packagers may also implement a method
-to validate the detected Spec objects:
-
-.. code-block:: python
-
-   @classmethod
-   def validate_detected_spec(cls, spec, extra_attributes):
-       """Validate a detected spec. Raise an exception if validation fails."""
-
-This method receives a detected spec along with its extra attributes and can be
-used to check that certain conditions are met by the spec. Packagers can either
-use assertions or raise an ``InvalidSpecDetected`` exception when the check fails.
-In case the conditions are not honored the spec will be discarded and any message
-associated with the assertion or the exception will be logged as the reason for
-discarding it.
-
-As an example, a package that wants to check that the ``compilers`` attribute is
-in the extra attributes can implement this method like this:
-
-.. code-block:: python
-
-   @classmethod
-   def validate_detected_spec(cls, spec, extra_attributes):
-       """Check that 'compilers' is in the extra attributes."""
-       msg = ('the extra attribute "compilers" must be set for '
-              'the detected spec "{0}"'.format(spec))
-       assert 'compilers' in extra_attributes, msg
-
-or like this:
-
-.. code-block:: python
-
-   @classmethod
-   def validate_detected_spec(cls, spec, extra_attributes):
-       """Check that 'compilers' is in the extra attributes."""
-       if 'compilers' not in extra_attributes:
-           msg = ('the extra attribute "compilers" must be set for '
-                  'the detected spec "{0}"'.format(spec))
-           raise InvalidSpecDetected(msg)
-
-.. _determine_spec_details:
-
-^^^^^^^^^^^^^^^^^^^^^^^^^
-Custom detection workflow
-^^^^^^^^^^^^^^^^^^^^^^^^^
-
-In the rare case when the mechanisms described so far don't fit the
-detection of a package, the implementation of all the methods above
-can be disregarded and instead a custom ``determine_spec_details``
-method can be implemented directly in the package class (note that
-the definition of the ``executables`` attribute is still required):
-
-.. code-block:: python
-
-   @classmethod
-   def determine_spec_details(cls, prefix, exes_in_prefix):
-       # exes_in_prefix = a set of paths, each path is an executable
-       # prefix = a prefix that is common to each path in exes_in_prefix
-
-       # return None or [] if none of the exes represent an instance of
-       # the package. Return one or more Specs for each instance of the
-       # package which is thought to be installed in the provided prefix
-
-This method takes as input a set of discovered executables (which match
-those specified by the user) as well as a common prefix shared by all
-of those executables. The function must return one or more :py:class:`spack.spec.Spec` associated
-with the executables (it can also return ``None`` to indicate that no
-provided executables are associated with the package).
-
-As an example, consider a made-up package called ``foo-package`` which
-builds an executable called ``foo``. ``FooPackage`` would appear as
-follows:
-
-.. code-block:: python
-
-   class FooPackage(Package):
-       homepage = "..."
-       url = "..."
-
-       version(...)
-
-       # Each string provided here is treated as a regular expression, and
-       # would match for example 'foo', 'foobar', and 'bazfoo'.
-       executables = ['foo']
-
-       @classmethod
-       def determine_spec_details(cls, prefix, exes_in_prefix):
-           candidates = list(x for x in exes_in_prefix
-                             if os.path.basename(x) == 'foo')
-           if not candidates:
-               return
-           # This implementation is lazy and only checks the first candidate
-           exe_path = candidates[0]
-           exe = Executable(exe_path)
-           output = exe('--version', output=str, error=str)
-           version_str = ...  # parse output for version string
-           return Spec.from_detection(
-               'foo-package@{0}'.format(version_str)
-           )
-
 .. _package-lifecycle:
 
 -----------------------------
@@ -4537,23 +4096,16 @@ want to clean up the temporary directory, or if the package isn't
 downloading properly, you might want to run *only* the ``fetch`` stage
 of the build.
 
-Spack performs best-effort installation of package dependencies by default,
-which means it will continue to install as many dependencies as possible
-after detecting failures.  If you are trying to install a package with a
-lot of dependencies where one or more may fail to build, you might want to
-try the ``--fail-fast`` option to stop the installation process on the first
-failure.
-
 A typical package workflow might look like this:
 
 .. code-block:: console
 
    $ spack edit mypackage
-   $ spack install --fail-fast mypackage
+   $ spack install mypackage
    ... build breaks! ...
    $ spack clean mypackage
    $ spack edit mypackage
-   $ spack install --fail-fast mypackage
+   $ spack install mypackage
    ... repeat clean/install until install works ...
 
 Below are some commands that will allow you some finer-grained
@@ -4622,29 +4174,23 @@ Does this in one of two ways:
 ``spack clean``
 ^^^^^^^^^^^^^^^
 
-Cleans up Spack's temporary and cached files.  This command can be used to
+Cleans up all of Spack's temporary and cached files.  This can be used to
 recover disk space if temporary files from interrupted or failed installs
-accumulate.
+accumulate in the staging area.
 
 When called with ``--stage`` or without arguments this removes all staged
 files.
 
-The ``--downloads`` option removes cached :ref:`cached <caching>` downloads.
+When called with ``--downloads`` this will clear all resources
+:ref:`cached <caching>` during installs.
 
-You can force the removal of all install failure tracking markers using the
-``--failures`` option.  Note that ``spack install`` will automatically clear
-relevant failure markings prior to performing the requested installation(s).
-
-Long-lived caches, like the virtual package index, are removed using the
-``--misc-cache`` option.
-
-The ``--python-cache`` option removes `.pyc`, `.pyo`, and `__pycache__`
-folders.
+When called with ``--user-cache`` this will remove caches in the user home
+directory, including cached virtual indices.
 
 To remove all of the above, the command can be called with ``--all``.
 
-When called with positional arguments, this command cleans up temporary files
-only for a particular package. If ``fetch``, ``stage``, or ``install``
+When called with positional arguments, cleans up temporary files only
+for a particular package. If ``fetch``, ``stage``, or ``install``
 are run again after this, Spack's build process will start from scratch.
 
 
@@ -4786,31 +4332,31 @@ directory, install directory, package directory) and others change to
 core spack locations.  For example, ``spack cd --module-dir`` will take you to
 the main python source directory of your spack install.
 
-.. _cmd-spack-build-env:
+.. _cmd-spack-env:
 
-^^^^^^^^^^^^^^^^^^^
-``spack build-env``
-^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^
+``spack env``
+^^^^^^^^^^^^^
 
-``spack build-env`` functions much like the standard unix ``build-env``
-command, but it takes a spec as an argument.  You can use it to see the
+``spack env`` functions much like the standard unix ``env`` command,
+but it takes a spec as an argument.  You can use it to see the
 environment variables that will be set when a particular build runs,
 for example:
 
 .. code-block:: console
 
-   $ spack build-env mpileaks@1.1%intel
+   $ spack env mpileaks@1.1%intel
 
 This will display the entire environment that will be set when the
 ``mpileaks@1.1%intel`` build runs.
 
 To run commands in a package's build environment, you can simply
-provide them after the spec argument to ``spack build-env``:
+provide them after the spec argument to ``spack env``:
 
 .. code-block:: console
 
    $ spack cd mpileaks@1.1%intel
-   $ spack build-env mpileaks@1.1%intel ./configure
+   $ spack env mpileaks@1.1%intel ./configure
 
 This will cd to the build directory and then run ``configure`` in the
 package's build environment.
@@ -4844,3 +4390,119 @@ might write:
    DWARF_PREFIX = $(spack location --install-dir libdwarf)
    CXXFLAGS += -I$DWARF_PREFIX/include
    CXXFLAGS += -L$DWARF_PREFIX/lib
+
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+Build System Configuration Support
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Imagine a developer creating a CMake or Autotools-based project in a
+local directory, which depends on libraries A-Z.  Once Spack has
+installed those dependencies, one would like to run ``cmake`` with
+appropriate command line and environment so CMake can find them.  The
+``spack setup`` command does this conveniently, producing a CMake
+configuration that is essentially the same as how Spack *would have*
+configured the project.  This can be demonstrated with a usage
+example:
+
+.. code-block:: console
+
+   $ cd myproject
+   $ spack setup myproject@local
+   $ mkdir build; cd build
+   $ ../spconfig.py ..
+   $ make
+   $ make install
+
+Notes:
+
+* Spack must have ``myproject/package.py`` in its repository for
+  this to work.
+* ``spack setup`` produces the executable script ``spconfig.py`` in
+  the local directory, and also creates the module file for the
+  package.  ``spconfig.py`` is normally run from the user's
+  out-of-source build directory.
+* The version number given to ``spack setup`` is arbitrary, just
+  like ``spack diy``.  ``myproject/package.py`` does not need to
+  have any valid downloadable versions listed (typical when a
+  project is new).
+* spconfig.py produces a CMake configuration that *does not* use the
+  Spack wrappers.  Any resulting binaries *will not* use RPATH,
+  unless the user has enabled it.  This is recommended for
+  development purposes, not production.
+* ``spconfig.py`` is human readable, and can serve as a developer
+  reference of what dependencies are being used.
+* ``make install`` installs the package into the Spack repository,
+  where it may be used by other Spack packages.
+* CMake-generated makefiles re-run CMake in some circumstances.  Use
+  of ``spconfig.py`` breaks this behavior, requiring the developer
+  to manually re-run ``spconfig.py`` when a ``CMakeLists.txt`` file
+  has changed.
+
+^^^^^^^^^^^^
+CMakePackage
+^^^^^^^^^^^^
+
+In order to enable ``spack setup`` functionality, the author of
+``myproject/package.py`` must subclass from ``CMakePackage`` instead
+of the standard ``Package`` superclass.  Because CMake is
+standardized, the packager does not need to tell Spack how to run
+``cmake; make; make install``.  Instead the packager only needs to
+create (optional) methods ``configure_args()`` and ``configure_env()``, which
+provide the arguments (as a list) and extra environment variables (as
+a dict) to provide to the ``cmake`` command.  Usually, these will
+translate variant flags into CMake definitions.  For example:
+
+.. code-block:: python
+
+   def cmake_args(self):
+       spec = self.spec
+       return [
+           '-DUSE_EVERYTRACE=%s' % ('YES' if '+everytrace' in spec else 'NO'),
+           '-DBUILD_PYTHON=%s' % ('YES' if '+python' in spec else 'NO'),
+           '-DBUILD_GRIDGEN=%s' % ('YES' if '+gridgen' in spec else 'NO'),
+           '-DBUILD_COUPLER=%s' % ('YES' if '+coupler' in spec else 'NO'),
+           '-DUSE_PISM=%s' % ('YES' if '+pism' in spec else 'NO')
+       ]
+
+If needed, a packager may also override methods defined in
+``StagedPackage`` (see below).
+
+^^^^^^^^^^^^^
+StagedPackage
+^^^^^^^^^^^^^
+
+``CMakePackage`` is implemented by subclassing the ``StagedPackage``
+superclass, which breaks down the standard ``Package.install()``
+method into several sub-stages: ``setup``, ``configure``, ``build``
+and ``install``.  Details:
+
+* Instead of implementing the standard ``install()`` method, package
+  authors implement the methods for the sub-stages
+  ``install_setup()``, ``install_configure()``,
+  ``install_build()``, and ``install_install()``.
+
+* The ``spack install`` command runs the sub-stages ``configure``,
+  ``build`` and ``install`` in order.  (The ``setup`` stage is
+  not run by default; see below).
+* The ``spack setup`` command runs the sub-stages ``setup``
+  and a dummy install (to create the module file).
+* The sub-stage install methods take no arguments (other than
+  ``self``).  The arguments ``spec`` and ``prefix`` to the standard
+  ``install()`` method may be accessed via ``self.spec`` and
+  ``self.prefix``.
+
+^^^^^^^^^^^^^
+GNU Autotools
+^^^^^^^^^^^^^
+
+The ``setup`` functionality is currently only available for
+CMake-based packages.  Extending this functionality to GNU
+Autotools-based packages would be easy (and should be done by a
+developer who actively uses Autotools).  Packages that use
+non-standard build systems can gain ``setup`` functionality by
+subclassing ``StagedPackage`` directly.
+
+.. Emacs local variables
+   Local Variables:
+   fill-column: 79
+   End:

lib/spack/docs/pipelines.rst

@@ -32,47 +32,30 @@ for setting up a build pipeline are as follows:
 #. Create a repository on your gitlab instance
 #. Add a ``spack.yaml`` at the root containing your pipeline environment (see
    below for details)
-#. Add a ``.gitlab-ci.yml`` at the root containing two jobs (one to generate
-   the pipeline dynamically, and one to run the generated jobs), similar to
+#. Add a ``.gitlab-ci.yml`` at the root containing a single job, similar to
    this one:
 
    .. code-block:: yaml
 
-      stages: [generate, build]
-
-      generate-pipeline:
-        stage: generate
+      pipeline-job:
         tags:
           - <custom-tag>
+          ...
         script:
-          - spack env activate --without-view .
-          - spack ci generate
-            --output-file "${CI_PROJECT_DIR}/jobs_scratch_dir/pipeline.yml"
-        artifacts:
-          paths:
-            - "${CI_PROJECT_DIR}/jobs_scratch_dir/pipeline.yml"
-
-      build-jobs:
-        stage: build
-        trigger:
-          include:
-            - artifact: "jobs_scratch_dir/pipeline.yml"
-              job: generate-pipeline
-          strategy: depend
-
+          - spack ci start
 
 #. Add any secrets required by the CI process to environment variables using the
    CI web ui
 #. Push a commit containing the ``spack.yaml`` and ``.gitlab-ci.yml`` mentioned above
    to the gitlab repository
 
-The ``<custom-tag>``, above, is used to pick one of your configured runners to
-run the pipeline generation phase (this is implemented in the ``spack ci generate``
-command, which assumes the runner has an appropriate version of spack installed
-and configured for use).  Of course, there are many ways to customize the process.
-You can configure CDash reporting on the progress of your builds, set up S3 buckets
-to mirror binaries built by the pipeline, clone a custom spack repository/ref for
-use by the pipeline, and more.
+The ``<custom-tag>``, above, is used to pick one of your configured runners,
+while the use of the ``spack ci start`` command implies that runner has an
+appropriate version of spack installed and configured for use.  Of course, there
+are myriad ways to customize the process.  You can configure CDash reporting
+on the progress of your builds, set up S3 buckets to mirror binaries built by
+the pipeline, clone a custom spack repository/ref for use by the pipeline, and
+more.
 
 While it is possible to set up pipelines on gitlab.com, the builds there are
 limited to 60 minutes and generic hardware.  It is also possible to
@@ -81,30 +64,21 @@ Gitlab to Google Kubernetes Engine (`GKE <https://cloud.google.com/kubernetes-en
 or Amazon Elastic Kubernetes Service (`EKS <https://aws.amazon.com/eks>`_), though those
 topics are outside the scope of this document.
 
-Spack's pipelines are now making use of the
-`trigger <https://docs.gitlab.com/12.9/ee/ci/yaml/README.html#trigger>`_ syntax to run
-dynamically generated
-`child pipelines <https://docs.gitlab.com/12.9/ee/ci/parent_child_pipelines.html>`_.
-Note that the use of dynamic child pipelines requires running Gitlab version
-``>= 12.9``.
-
 -----------------------------------
 Spack commands supporting pipelines
 -----------------------------------
 
-Spack provides a command ``ci`` with two sub-commands: ``spack ci generate`` generates
-a pipeline (a .gitlab-ci.yml file) from a spack environment, and ``spack ci rebuild``
-checks a spec against a remote mirror and possibly rebuilds it from source and updates
-the binary mirror with the latest built package.  Both ``spack ci ...`` commands must
-be run from within the same environment, as each one makes use of the environment for
-different purposes.  Additionally, some options to the commands (or conditions present
-in the spack environment file) may require particular environment variables to be
+Spack provides a command `ci` with sub-commands for doing various things related
+to automated build pipelines.  All of the ``spack ci ...`` commands must be run
+from within a environment, as each one makes use of the environment for different
+purposes.  Additionally, some options to the commands (or conditions present in
+the spack environment file) may require particular environment variables to be
 set in order to function properly.  Examples of these are typically secrets
 needed for pipeline operation that should not be visible in a spack environment
 file.  These environment variables are described in more detail
 :ref:`ci_environment_variables`.
 
-.. _cmd-spack-ci:
+.. _cmd_spack_ci:
 
 ^^^^^^^^^^^^^^^^^^
 ``spack ci``
@@ -113,7 +87,16 @@ file.  These environment variables are described in more detail
 Super-command for functionality related to generating pipelines and executing
 pipeline jobs.
 
-.. _cmd-spack-ci-generate:
+.. _cmd_spack_ci_start:
+
+^^^^^^^^^^^^^^^^^^
+``spack ci start``
+^^^^^^^^^^^^^^^^^^
+
+Currently this command is a short-cut to first run ``spack ci generate``, followed
+by ``spack ci pushyaml``.
+
+.. _cmd_spack_ci_generate:
 
 ^^^^^^^^^^^^^^^^^^^^^
 ``spack ci generate``
@@ -122,11 +105,19 @@ pipeline jobs.
 Concretizes the specs in the active environment, stages them (as described in
 :ref:`staging_algorithm`), and writes the resulting ``.gitlab-ci.yml`` to disk.
 
-This sub-command takes two arguments, but the most useful is ``--output-file``,
-which should be an absolute path (including file name) to the generated
-pipeline, if the default (``./.gitlab-ci.yml``) is not desired.
+.. _cmd_spack_ci_pushyaml:
 
-.. _cmd-spack-ci-rebuild:
+^^^^^^^^^^^^^^^^^^^^^
+``spack ci pushyaml``
+^^^^^^^^^^^^^^^^^^^^^
+
+Generates a commit containing the generated ``.gitlab-ci.yml`` and pushes it to a
+``DOWNSTREAM_CI_REPO``, which is frequently the same repository.  The branch
+created has the same name as the current branch being tested, but has ``multi-ci-``
+prepended to the branch name.  Once Gitlab CI has full support for dynamically
+defined workloads, this command will be deprecated.
+
+.. _cmd_spack_ci_rebuild:
 
 ^^^^^^^^^^^^^^^^^^^^
 ``spack ci rebuild``
@@ -136,16 +127,12 @@ This sub-command is responsible for ensuring a single spec from the release
 environment is up to date on the remote mirror configured in the environment,
 and as such, corresponds to a single job in the ``.gitlab-ci.yml`` file.
 
-Rather than taking command-line arguments, this sub-command expects information
-to be communicated via environment variables, which will typically come via the
-``.gitlab-ci.yml`` job as ``variables``.
-
 ------------------------------------
 A pipeline-enabled spack environment
 ------------------------------------
 
 Here's an example of a spack environment file that has been enhanced with
-sections describing a build pipeline:
+sections desribing a build pipeline:
 
 .. code-block:: yaml
 
@@ -171,14 +158,14 @@ sections describing a build pipeline:
              - os=ubuntu18.04
            runner-attributes:
              tags:
-               - spack-kube
-             image: spack/ubuntu-bionic
+               - spack-k8s
+             image: spack/spack_builder_ubuntu_18.04
          - match:
              - os=centos7
            runner-attributes:
              tags:
-               - spack-kube
-             image: spack/centos7
+               - spack-k8s
+             image: spack/spack_builder_centos_7
      cdash:
        build-group: Release Testing
        url: https://cdash.spack.io
@@ -197,33 +184,15 @@ corresponds to a known gitlab runner, where the ``match`` section is used
 in assigning a release spec to one of the runners, and the ``runner-attributes``
 section is used to configure the spec/job for that particular runner.
 
-Both the top-level ``gitlab-ci`` section as well as each ``runner-attributes``
-section can also contain the following keys: ``image``, ``tags``, ``variables``,
-``before_script``, ``script``, and ``after_script``.  If any of these keys are
-provided at the ``gitlab-ci`` level, they will be used as the defaults for any
-``runner-attributes``, unless they are overridden in those sections.  Specifying
-any of these keys at the ``runner-attributes`` level generally overrides the
-keys specified at the higher level, with a couple exceptions.  Any ``variables``
-specified at both levels result in those dictionaries getting merged in the
-resulting generated job, and any duplicate variable names get assigned the value
-provided in the specific ``runner-attributes``.  If ``tags`` are specified both
-at the ``gitlab-ci`` level as well as the ``runner-attributes`` level, then the
-lists of tags are combined, and any duplicates are removed.
-
-See the section below on using a custom spack for an example of how these keys
-could be used.
-
 There are other pipeline options you can configure within the ``gitlab-ci`` section
-as well.
-
-The ``bootstrap`` section allows you to specify lists of specs from
+as well.  The ``bootstrap`` section allows you to specify lists of specs from
 your ``definitions`` that should be staged ahead of the environment's ``specs`` (this
 section is described in more detail below).  The ``enable-artifacts-buildcache`` key
 takes a boolean and determines whether the pipeline uses artifacts to store and
 pass along the buildcaches from one stage to the next (the default if you don't
-provide this option is ``False``).
-
-The
+provide this option is ``False``).  The ``enable-debug-messages`` key takes a boolean
+and allows you to choose whether the pipeline build jobs are run as ``spack -d ci rebuild``
+or just ``spack ci rebuild`` (the default is not to enable debug messages).  The
 ``final-stage-rebuild-index`` section controls whether an extra job is added to the
 end of your pipeline (in a stage by itself) which will regenerate the mirror's
 buildcache index.  Under normal operation, each pipeline job that rebuilds a package
@@ -246,11 +215,6 @@ progresses, this build group may have jobs added or removed. The url, project,
 and site are used to specify the CDash instance to which build results should
 be reported.
 
-Take a look at the
-`schema <https://github.com/spack/spack/blob/develop/lib/spack/spack/schema/gitlab_ci.py>`_
-for the gitlab-ci section of the spack environment file, to see precisely what
-syntax is allowed there.
-
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 Assignment of specs to runners
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -276,18 +240,7 @@ runners known to the gitlab instance.  For Docker executor type runners, the
 as well as an ``entrypoint`` to override whatever the default for that image is).
 For other types of runners the ``variables`` key will be useful to pass any
 information on to the runner that it needs to do its work (e.g. scheduler
-parameters, etc.).  Any ``variables`` provided here will be added, verbatim, to
-each job.
-
-The ``runner-attributes`` section also allows users to supply custom ``script``,
-``before_script``, and ``after_script`` sections to be applied to every job
-scheduled on that runner.  This allows users to do any custom preparation or
-cleanup tasks that fit their particular workflow, as well as completely
-customize the rebuilding of a spec if they so choose.  Spack will not generate
-a ``before_script`` or ``after_script`` for jobs, but if you do not provide
-a custom ``script``, spack will generate one for you that assumes your
-``spack.yaml`` is at the root of the repository, activates that environment for
-you, and invokes ``spack ci rebuild``.
+parameters, etc.).
 
 .. _staging_algorithm:
 
@@ -298,8 +251,8 @@ Summary of ``.gitlab-ci.yml`` generation algorithm
 All specs yielded by the matrix (or all the specs in the environment) have their
 dependencies computed, and the entire resulting set of specs are staged together
 before being run through the ``gitlab-ci/mappings`` entries, where each staged
-spec is assigned a runner.  "Staging" is the name given to the process of
-figuring out in what order the specs should be built, taking into consideration
+spec is assigned a runner.  "Staging" is the name we have given to the process
+of figuring out in what order the specs should be built, taking into consideration
 Gitlab CI rules about jobs/stages.  In the staging process the goal is to maximize
 the number of jobs in any stage of the pipeline, while ensuring that the jobs in
 any stage only depend on jobs in previous stages (since those jobs are guaranteed
@@ -310,7 +263,7 @@ a runner, the ``.gitlab-ci.yml`` is written to disk.
 
 The short example provided above would result in the ``readline``, ``ncurses``,
 and ``pkgconf`` packages getting staged and built on the runner chosen by the
-``spack-k8s`` tag.  In this example, spack assumes the runner is a Docker executor
+``spack-k8s`` tag.  In this example, we assume the runner is a Docker executor
 type runner, and thus certain jobs will be run in the ``centos7`` container,
 and others in the ``ubuntu-18.04`` container.  The resulting ``.gitlab-ci.yml``
 will contain 6 jobs in three stages.  Once the jobs have been generated, the
@@ -369,12 +322,12 @@ Here's an example of what bootstrapping some compilers might look like:
          # mappings similar to the example higher up in this description
          ...
 
-The example above adds a list to the ``definitions`` called ``compiler-pkgs``
-(you can add any number of these), which lists compiler packages that should
-be staged ahead of the full matrix of release specs (in this example, only
-readline).  Then within the ``gitlab-ci`` section, note the addition of a
-``bootstrap`` section, which can contain a list of items, each referring to
-a list in the ``definitions`` section.  These items can either
+In the example above, we have added a list to the ``definitions`` called
+``compiler-pkgs`` (you can add any number of these), which lists compiler packages
+we want to be staged ahead of the full matrix of release specs (which consists
+only of readline in our example).  Then within the ``gitlab-ci`` section, we
+have added a ``bootstrap`` section, which can contain a list of items, each
+referring to a list in the ``definitions`` section.  These items can either
 be a dictionary or a string.  If you supply a dictionary, it must have a name
 key whose value must match one of the lists in definitions and it can have a
 ``compiler-agnostic`` key whose value is a boolean.  If you supply a string,
@@ -410,95 +363,32 @@ Using a custom spack in your pipeline
 
 If your runners will not have a version of spack ready to invoke, or if for some
 other reason you want to use a custom version of spack to run your pipelines,
-this section provides an example of how you could take advantage of
-user-provided pipeline scripts to accomplish this fairly simply.  First, you
-could use the GitLab user interface to create CI environment variables
-containing the url and branch or tag you want to use (calling them, for
-example, ``SPACK_REPO`` and ``SPACK_REF``), then refer to those in a custom shell
-script invoked both from your pipeline generation job, as well as in your rebuild
-jobs.  Here's the ``generate-pipeline`` job from the top of this document,
-updated to invoke a custom shell script that will clone and source a custom
-spack:
+this can be accomplished fairly simply.  First, create CI environment variables
+containing the url and branch/tag you want to clone (calling them, for example,
+``SPACK_REPO`` and ``SPACK_REF``), use them to clone spack in your pre-ci
+``before_script``, and finally pass those same values along to the workload
+generation process via the ``spack-repo`` and ``spack-ref`` cli args.  Here's
+an example:
 
 .. code-block:: yaml
 
-   generate-pipeline:
+   pipeline-job:
      tags:
        - <some-other-tag>
    before_script:
-     - ./cloneSpack.sh
+     - git clone ${SPACK_REPO} --branch ${SPACK_REF}
+     - . ./spack/share/spack/setup-env.sh
    script:
-     - spack env activate --without-view .
-     - spack ci generate
-       --output-file "${CI_PROJECT_DIR}/jobs_scratch_dir/pipeline.yml"
+     - spack ci start --spack-repo ${SPACK_REPO} --spack-ref ${SPACK_REF} <...args>
    after_script:
      - rm -rf ./spack
-   artifacts:
-     paths:
-       - "${CI_PROJECT_DIR}/jobs_scratch_dir/pipeline.yml"
 
-And the ``cloneSpack.sh`` script could contain:
-
-.. code-block:: bash
-
-   #!/bin/bash
-
-   git clone ${SPACK_REPO}
-   pushd ./spack
-   git checkout ${SPACK_REF}
-   popd
-
-   . "./spack/share/spack/setup-env.sh"
-
-   spack --version
-
-Finally, you would also want your generated rebuild jobs to clone that version
-of spack, so you would update your ``spack.yaml`` from above as follows:
-
-.. code-block:: yaml
-
-   spack:
-     ...
-     gitlab-ci:
-       mappings:
-         - match:
-             - os=ubuntu18.04
-           runner-attributes:
-             tags:
-               - spack-kube
-             image: spack/ubuntu-bionic
-             before_script:
-               - ./cloneSpack.sh
-             script:
-               - spack env activate --without-view .
-               - spack -d ci rebuild
-             after_script:
-               - rm -rf ./spack
-
-Now all of the generated rebuild jobs will use the same shell script to clone
-spack before running their actual workload.  Note in the above example the
-provision of a custom ``script`` section.  The reason for this is to run
-``spack ci rebuild`` in debug mode to get more information when builds fail.
-
-Now imagine you have long pipelines with many specs to be built, and you
-are pointing to a spack repository and branch that has a tendency to change
-frequently, such as the main repo and it's ``develop`` branch.  If each child
-job checks out the ``develop`` branch, that could result in some jobs running
-with one SHA of spack, while later jobs run with another.  To help avoid this
-issue, the pipeline generation process saves global variables called
-``SPACK_VERSION`` and ``SPACK_CHECKOUT_VERSION`` that capture the version
-of spack used to generate the pipeline.  While the ``SPACK_VERSION`` variable
-simply contains the human-readable value produced by ``spack -V`` at pipeline
-generation time, the ``SPACK_CHECKOUT_VERSION`` variable can be used in a
-``git checkout`` command to make sure all child jobs checkout the same version
-of spack used to generate the pipeline.  To take advantage of this, you could
-simply replace ``git checkout ${SPACK_REF}`` in the example ``cloneSpack.sh``
-script above with ``git checkout ${SPACK_CHECKOUT_VERSION}``.
-
-On the other hand, if you're pointing to a spack repository and branch under your
-control, there may be no benefit in using the captured ``SPACK_CHECKOUT_VERSION``,
-and you can instead just clone using the project CI variables you set (in the
-earlier example these were ``SPACK_REPO`` and ``SPACK_REF``).
+If the ``spack ci start`` command receives those extra command line arguments,
+then it adds similar ``before_script`` and ``after_script`` sections for each of
+the ``spack ci rebuild`` jobs it generates (cloning and sourcing a custom
+spack in the ``before_script`` and removing it again in the ``after_script``).
+This gives you control over the version of spack used when the rebuild jobs
+are actually run on the gitlab runner.
 
 .. _ci_environment_variables:
 
@@ -540,3 +430,10 @@ SPACK_SIGNING_KEY
 ^^^^^^^^^^^^^^^^^
 
 Needed to sign/verify binary packages from the remote binary mirror.
+
+^^^^^^^^^^^^^^^^^^
+DOWNSTREAM_CI_REPO
+^^^^^^^^^^^^^^^^^^
+
+Needed until Gitlab CI supports dynamic job generation.  Can contain connection
+credentials, and could be the same repository or a different one.

lib/spack/docs/repositories.rst

@@ -280,16 +280,16 @@ you install it, you can use ``spack spec -N``:
 
    Concretized
    --------------------------------
-   builtin.hdf5@1.10.0-patch1%apple-clang@7.0.2+cxx~debug+fortran+mpi+shared~szip~threadsafe arch=darwin-elcapitan-x86_64
-       ^builtin.openmpi@2.0.1%apple-clang@7.0.2~mxm~pmi~psm~psm2~slurm~sqlite3~thread_multiple~tm~verbs+vt arch=darwin-elcapitan-x86_64
-           ^builtin.hwloc@1.11.4%apple-clang@7.0.2 arch=darwin-elcapitan-x86_64
-               ^builtin.libpciaccess@0.13.4%apple-clang@7.0.2 arch=darwin-elcapitan-x86_64
-                   ^builtin.libtool@2.4.6%apple-clang@7.0.2 arch=darwin-elcapitan-x86_64
-                       ^builtin.m4@1.4.17%apple-clang@7.0.2+sigsegv arch=darwin-elcapitan-x86_64
-                           ^builtin.libsigsegv@2.10%apple-clang@7.0.2 arch=darwin-elcapitan-x86_64
-                   ^builtin.pkg-config@0.29.1%apple-clang@7.0.2+internal_glib arch=darwin-elcapitan-x86_64
-                   ^builtin.util-macros@1.19.0%apple-clang@7.0.2 arch=darwin-elcapitan-x86_64
-       ^builtin.zlib@1.2.8%apple-clang@7.0.2+pic arch=darwin-elcapitan-x86_64
+   builtin.hdf5@1.10.0-patch1%clang@7.0.2-apple+cxx~debug+fortran+mpi+shared~szip~threadsafe arch=darwin-elcapitan-x86_64
+       ^builtin.openmpi@2.0.1%clang@7.0.2-apple~mxm~pmi~psm~psm2~slurm~sqlite3~thread_multiple~tm~verbs+vt arch=darwin-elcapitan-x86_64
+           ^builtin.hwloc@1.11.4%clang@7.0.2-apple arch=darwin-elcapitan-x86_64
+               ^builtin.libpciaccess@0.13.4%clang@7.0.2-apple arch=darwin-elcapitan-x86_64
+                   ^builtin.libtool@2.4.6%clang@7.0.2-apple arch=darwin-elcapitan-x86_64
+                       ^builtin.m4@1.4.17%clang@7.0.2-apple+sigsegv arch=darwin-elcapitan-x86_64
+                           ^builtin.libsigsegv@2.10%clang@7.0.2-apple arch=darwin-elcapitan-x86_64
+                   ^builtin.pkg-config@0.29.1%clang@7.0.2-apple+internal_glib arch=darwin-elcapitan-x86_64
+                   ^builtin.util-macros@1.19.0%clang@7.0.2-apple arch=darwin-elcapitan-x86_64
+       ^builtin.zlib@1.2.8%clang@7.0.2-apple+pic arch=darwin-elcapitan-x86_64
 
 .. warning::
 

lib/spack/docs/workflows.rst

@@ -284,10 +284,8 @@ have some drawbacks:
    The ``spack load`` and ``spack module tcl loads`` commands, on the
    other hand, are not very smart: if the user-supplied spec matches
    more than one installed package, then ``spack module tcl loads`` will
-   fail. This default behavior may change in the future.  For now,
-   the workaround is to either be more specific on any failing ``spack load``
-   commands or to use ``spack load --first`` to allow spack to load the
-   first matching spec.
+   fail. This may change in the future.  For now, the workaround is to
+   be more specific on any ``spack load`` commands that fail.
 
 
 """"""""""""""""""""""
@@ -446,7 +444,7 @@ environment.
 
 A single-prefix filesystem view is a single directory tree that is the
 union of the directory hierarchies of a number of installed packages;
-it is similar to the directory hierarchy that might exist under
+it is similar to the directory hiearchy that might exist under
 ``/usr/local``.  The files of the view's installed packages are
 brought into the view by symbolic or hard links, referencing the
 original Spack installation.
@@ -703,6 +701,400 @@ environments:
   Administrators might find things easier to maintain without the
   added "heavyweight" state of a view.
 
+------------------------------
+Developing Software with Spack
+------------------------------
+
+For any project, one needs to assemble an
+environment of that application's dependencies.  You might consider
+loading a series of modules or creating a filesystem view.  This
+approach, while obvious, has some serious drawbacks:
+
+1. There is no guarantee that an environment created this way will be
+   consistent.  Your application could end up with dependency A
+   expecting one version of MPI, and dependency B expecting another.
+   The linker will not be happy...
+
+2. Suppose you need to debug a package deep within your software DAG.
+   If you build that package with a manual environment, then it
+   becomes difficult to have Spack auto-build things that depend on
+   it.  That could be a serious problem, depending on how deep the
+   package in question is in your dependency DAG.
+
+3. At its core, Spack is a sophisticated concretization algorithm that
+   matches up packages with appropriate dependencies and creates a
+   *consistent* environment for the package it's building.  Writing a
+   list of ``spack load`` commands for your dependencies is at least
+   as hard as writing the same list of ``depends_on()`` declarations
+   in a Spack package.  But it makes no use of Spack concretization
+   and is more error-prone.
+
+4. Spack provides an automated, systematic way not just to find a
+   packages's dependencies --- but also to build other packages on
+   top.  Any Spack package can become a dependency for another Spack
+   package, offering a powerful vision of software re-use.  If you
+   build your package A outside of Spack, then your ability to use it
+   as a building block for other packages in an automated way is
+   diminished: other packages depending on package A will not
+   be able to use Spack to fulfill that dependency.
+
+5. If you are reading this manual, you probably love Spack.  You're
+   probably going to write a Spack package for your software so
+   prospective users can install it with the least amount of pain.
+   Why should you go to additional work to find dependencies in your
+   development environment?  Shouldn't Spack be able to help you build
+   your software based on the package you've already written?
+
+In this section, we show how Spack can be used in the software
+development process to greatest effect, and how development packages
+can be seamlessly integrated into the Spack ecosystem.  We will show
+how this process works by example, assuming the software you are
+creating is called ``mylib``.
+
+^^^^^^^^^^^^^^^^^^^^^
+Write the CMake Build
+^^^^^^^^^^^^^^^^^^^^^
+
+For now, the techniques in this section only work for CMake-based
+projects, although they could be easily extended to other build
+systems in the future.  We will therefore assume you are using CMake
+to build your project.
+
+The ``CMakeLists.txt`` file should be written as normal.  A few caveats:
+
+1. Your project should produce binaries with RPATHs.  This will ensure
+   that they work the same whether built manually or automatically by
+   Spack.  For example:
+
+.. code-block:: cmake
+
+   # enable @rpath in the install name for any shared library being built
+   # note: it is planned that a future version of CMake will enable this by default
+   set(CMAKE_MACOSX_RPATH 1)
+
+   # Always use full RPATH
+   # http://www.cmake.org/Wiki/CMake_RPATH_handling
+   # http://www.kitware.com/blog/home/post/510
+
+   # use, i.e. don't skip the full RPATH for the build tree
+   SET(CMAKE_SKIP_BUILD_RPATH  FALSE)
+
+   # when building, don't use the install RPATH already
+   # (but later on when installing)
+   SET(CMAKE_BUILD_WITH_INSTALL_RPATH FALSE)
+
+   # add the automatically determined parts of the RPATH
+   # which point to directories outside the build tree to the install RPATH
+   SET(CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE)
+
+   # the RPATH to be used when installing, but only if it's not a system directory
+   LIST(FIND CMAKE_PLATFORM_IMPLICIT_LINK_DIRECTORIES "${CMAKE_INSTALL_PREFIX}/lib" isSystemDir)
+   IF("${isSystemDir}" STREQUAL "-1")
+      SET(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/lib")
+   ENDIF("${isSystemDir}" STREQUAL "-1")
+
+
+2. Spack provides a CMake variable called
+   ``SPACK_TRANSITIVE_INCLUDE_PATH``, which contains the ``include/``
+   directory for all of your project's transitive dependencies.  It
+   can be useful if your project ``#include``s files from package B,
+   which ``#include`` files from package C, but your project only
+   lists project B as a dependency.  This works in traditional
+   single-tree build environments, in which B and C's include files
+   live in the same place.  In order to make it work with Spack as
+   well, you must add the following to ``CMakeLists.txt``.  It will
+   have no effect when building without Spack:
+
+   .. code-block:: cmake
+
+      # Include all the transitive dependencies determined by Spack.
+      # If we're not running with Spack, this does nothing...
+      include_directories($ENV{SPACK_TRANSITIVE_INCLUDE_PATH})
+
+   .. note::
+
+      Note that this feature is controversial and could break with
+      future versions of GNU ld.  The best practice is to make sure
+      anything you ``#include`` is listed as a dependency in your
+      CMakeLists.txt (and Spack package).
+
+.. _write-the-spack-package:
+
+^^^^^^^^^^^^^^^^^^^^^^^
+Write the Spack Package
+^^^^^^^^^^^^^^^^^^^^^^^
+
+The Spack package also needs to be written, in tandem with setting up
+the build (for example, CMake).  The most important part of this task
+is declaring dependencies.  Here is an example of the Spack package
+for the ``mylib`` package (ellipses for brevity):
+
+.. code-block:: python
+
+   class Mylib(CMakePackage):
+       """Misc. reusable utilities used by Myapp."""
+
+       homepage = "https://github.com/citibeth/mylib"
+       url = "https://github.com/citibeth/mylib/tarball/123"
+
+       version('0.1.2', '3a6acd70085e25f81b63a7e96c504ef9')
+       version('develop', git='https://github.com/citibeth/mylib.git',
+           branch='develop')
+
+       variant('everytrace', default=False,
+               description='Report errors through Everytrace')
+       ...
+
+       extends('python')
+
+       depends_on('eigen')
+       depends_on('everytrace', when='+everytrace')
+       depends_on('proj', when='+proj')
+       ...
+       depends_on('cmake', type='build')
+       depends_on('doxygen', type='build')
+
+       def cmake_args(self):
+           spec = self.spec
+           return [
+               '-DUSE_EVERYTRACE=%s' % ('YES' if '+everytrace' in spec else 'NO'),
+               '-DUSE_PROJ4=%s' % ('YES' if '+proj' in spec else 'NO'),
+               ...
+               '-DUSE_UDUNITS2=%s' % ('YES' if '+udunits2' in spec else 'NO'),
+               '-DUSE_GTEST=%s' % ('YES' if '+googletest' in spec else 'NO')]
+
+This is a standard Spack package that can be used to install
+``mylib`` in a production environment.  The list of dependencies in
+the Spack package will generally be a repeat of the list of CMake
+dependencies.  This package also has some features that allow it to be
+used for development:
+
+1. It subclasses ``CMakePackage`` instead of ``Package``.  This
+   eliminates the need to write an ``install()`` method, which is
+   defined in the superclass.  Instead, one just needs to write the
+   ``configure_args()`` method.  That method should return the
+   arguments needed for the ``cmake`` command (beyond the standard
+   CMake arguments, which Spack will include already).  These
+   arguments are typically used to turn features on/off in the build.
+
+2. It specifies a non-checksummed version ``develop``.  Running
+   ``spack install mylib@develop`` the ``@develop`` version will
+   install the latest version off the develop branch.  This method of
+   download is useful for the developer of a project while it is in
+   active development; however, it should only be used by developers
+   who control and trust the repository in question!
+
+3. The ``url``, ``url_for_version()`` and ``homepage`` attributes are
+   not used in development.  Don't worry if you don't have any, or if
+   they are behind a firewall.
+
+^^^^^^^^^^^^^^^^
+Build with Spack
+^^^^^^^^^^^^^^^^
+
+Now that you have a Spack package, you can use Spack to find its
+dependencies automatically.  For example:
+
+.. code-block:: console
+
+   $ cd mylib
+   $ spack setup mylib@local
+
+The result will be a file ``spconfig.py`` in the top-level
+``mylib/`` directory.  It is a short script that calls CMake with the
+dependencies and options determined by Spack --- similar to what
+happens in ``spack install``, but now written out in script form.
+From a developer's point of view, you can think of ``spconfig.py`` as
+a stand-in for the ``cmake`` command.
+
+.. note::
+
+   You can invent any "version" you like for the ``spack setup``
+   command.
+
+.. note::
+
+   Although ``spack setup`` does not build your package, it does
+   create and install a module file, and mark in the database that
+   your package has been installed.  This can lead to errors, of
+   course, if you don't subsequently install your package.
+   Also... you will need to ``spack uninstall`` before you run
+   ``spack setup`` again.
+
+
+You can now build your project as usual with CMake:
+
+.. code-block:: console
+
+   $ mkdir build; cd build
+   $ ../spconfig.py ..   # Instead of cmake ..
+   $ make
+   $ make install
+
+Once your ``make install`` command is complete, your package will be
+installed, just as if you'd run ``spack install``.  Except you can now
+edit, re-build and re-install as often as needed, without checking
+into Git or downloading tarballs.
+
+.. note::
+
+   The build you get this way will be *almost* the same as the build
+   from ``spack install``.  The only difference is, you will not be
+   using Spack's compiler wrappers.  This difference has not caused
+   problems in our experience, as long as your project sets
+   RPATHs as shown above.  You DO use RPATHs, right?
+
+^^^^^^^^^^^^^^^^^^^^
+Build Other Software
+^^^^^^^^^^^^^^^^^^^^
+
+Now that you've built ``mylib`` with Spack, you might want to build
+another package that depends on it --- for example, ``myapp``.  This
+is accomplished easily enough:
+
+.. code-block:: console
+
+   $ spack install myapp ^mylib@local
+
+Note that auto-built software has now been installed *on top of*
+manually-built software, without breaking Spack's "web."  This
+property is useful if you need to debug a package deep in the
+dependency hierarchy of your application.  It is a *big* advantage of
+using ``spack setup`` to build your package's environment.
+
+If you feel your software is stable, you might wish to install it with
+``spack install`` and skip the source directory.  You can just use,
+for example:
+
+.. code-block:: console
+
+   $ spack install mylib@develop
+
+.. _release-your-software:
+
+^^^^^^^^^^^^^^^^^^^^^
+Release Your Software
+^^^^^^^^^^^^^^^^^^^^^
+
+You are now ready to release your software as a tarball with a
+numbered version, and a Spack package that can build it.  If you're
+hosted on GitHub, this process will be a bit easier.
+
+#. Put tag(s) on the version(s) in your GitHub repo you want to be
+   release versions.  For example, a tag ``v0.1.0`` for version 0.1.0.
+
+#. Set the ``url`` in your ``package.py`` to download a tarball for
+   the appropriate version.  GitHub will give you a tarball for any
+   commit in the repo, if you tickle it the right way.  For example:
+
+   .. code-block:: python
+
+      url = 'https://github.com/citibeth/mylib/tarball/v0.1.2'
+
+#. Use Spack to determine your version's hash, and cut'n'paste it into
+   your ``package.py``:
+
+   .. code-block:: console
+
+      $ spack checksum mylib 0.1.2
+      ==> Found 1 versions of mylib
+        0.1.2     https://github.com/citibeth/mylib/tarball/v0.1.2
+
+      How many would you like to checksum? (default is 5, q to abort)
+      ==> Downloading...
+      ==> Trying to fetch from https://github.com/citibeth/mylib/tarball/v0.1.2
+      ######################################################################## 100.0%
+      ==> Checksummed new versions of mylib:
+            version('0.1.2', '3a6acd70085e25f81b63a7e96c504ef9')
+
+#. You should now be able to install released version 0.1.2 of your package with:
+
+   .. code-block:: console
+
+      $ spack install mylib@0.1.2
+
+#. There is no need to remove the `develop` version from your package.
+   Spack concretization will always prefer numbered version to
+   non-numeric versions.  Users will only get it if they ask for it.
+
+^^^^^^^^^^^^^^^^^^^^^^^^
+Distribute Your Software
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+Once you've released your software, other people will want to build
+it; and you will need to tell them how.  In the past, that has meant a
+few paragraphs of prose explaining which dependencies to install.  But
+now you use Spack, and those instructions are written in executable
+Python code.  But your software has many dependencies, and you know
+Spack is the best way to install it:
+
+#. First, you will want to fork Spack's ``develop`` branch.  Your aim
+   is to provide a stable version of Spack that you KNOW will install
+   your software.  If you make changes to Spack in the process, you
+   will want to submit pull requests to Spack core.
+
+#. Add your software's ``package.py`` to that fork.  You should submit
+   a pull request for this as well, unless you don't want the public
+   to know about your software.
+
+#. Prepare instructions that read approximately as follows:
+
+   #. Download Spack from your forked repo.
+
+   #. Install Spack; see :ref:`getting_started`.
+
+   #. Set up an appropriate ``packages.yaml`` file.  You should tell
+      your users to include in this file whatever versions/variants
+      are needed to make your software work correctly (assuming those
+      are not already in your ``packages.yaml``).
+
+   #. Run ``spack install mylib``.
+
+   #. Run this script to generate the ``module load`` commands or
+      filesystem view needed to use this software.
+
+#. Be aware that your users might encounter unexpected bootstrapping
+   issues on their machines, especially if they are running on older
+   systems.  The :ref:`getting_started` section should cover this, but
+   there could always be issues.
+
+^^^^^^^^^^^^^^^^^^^
+Other Build Systems
+^^^^^^^^^^^^^^^^^^^
+
+``spack setup`` currently only supports CMake-based builds, in
+packages that subclass ``CMakePackage``.  The intent is that this
+mechanism should support a wider range of build systems; for example,
+GNU Autotools.  Someone well-versed in Autotools is needed to develop
+this patch and test it out.
+
+Python Distutils is another popular build system that should get
+``spack setup`` support.  For non-compiled languages like Python,
+``spack diy`` may be used.  Even better is to put the source directory
+directly in the user's ``PYTHONPATH``.  Then, edits in source files
+are immediately available to run without any install process at all!
+
+^^^^^^^^^^
+Conclusion
+^^^^^^^^^^
+
+The ``spack setup`` development workflow provides better automation,
+flexibility and safety than workflows relying on environment modules
+or filesystem views.  However, it has some drawbacks:
+
+#. It currently works only with projects that use the CMake build
+   system.  Support for other build systems is not hard to build, but
+   will require a small amount of effort for each build system to be
+   supported.  It might not work well with some IDEs.
+
+#. It only works with packages that sub-class ``StagedPackage``.
+   Currently, most Spack packages do not.  Converting them is not
+   hard; but must be done on a package-by-package basis.
+
+#. It requires that users are comfortable with Spack, as they
+   integrate Spack explicitly in their workflow.  Not all users are
+   willing to do this.
+
 -------------------------------------
 Using Spack to Replace Homebrew/Conda
 -------------------------------------
@@ -845,7 +1237,7 @@ you can also manually set them in your ``.bashrc``.
    2. Other package managers like Homebrew will try to install things to the
       same directory. If you plan on using Homebrew in conjunction with Spack,
       don't symlink things to ``/usr/local``.
-   3. If you are on a shared workstation, or don't have sudo privileges, you
+   3. If you are on a shared workstation, or don't have sudo priveleges, you
       can't do this.
 
    If you still want to do this anyway, there are several ways around SIP.
@@ -964,14 +1356,6 @@ The main points that are implemented below:
    the spack builds in the config.
    (The Travis yaml parser is a bit buggy on the echo command.)
 
-#. Without control for the user, Travis jobs will run on various
-   ``x86_64`` microarchitectures. If you plan to cache build results,
-   e.g. to accelerate dependency builds, consider building for the
-   generic ``x86_64`` target only.
-   Limiting the microarchitecture will also find more packages when
-   working with the
-   `E4S Spack build cache <https://oaciss.uoregon.edu/e4s/e4s_buildcache_inventory.html>`_.
-
 #. Builds over 10 minutes need to be prefixed with ``travis_wait``.
    Alternatively, generate output once with ``spack install -v``.
 
@@ -1011,13 +1395,10 @@ The main points that are implemented below:
      - export CXXFLAGS="-std=c++11"
 
    install:
-     - |
-       if ! which spack >/dev/null; then
+     - if ! which spack >/dev/null; then
          mkdir -p $SPACK_ROOT &&
          git clone --depth 50 https://github.com/spack/spack.git $SPACK_ROOT &&
-         printf "config:\n  build_jobs: 2\n" > $SPACK_ROOT/etc/spack/config.yaml &&
-         printf "packages:\n  all:\n    target: ['x86_64']\n" \
-                 > $SPACK_ROOT/etc/spack/packages.yaml;
+         echo -e "config:""\n  build_jobs:"" 2" > $SPACK_ROOT/etc/spack/config.yaml;
        fi
      - travis_wait spack install cmake@3.7.2~openssl~ncurses
      - travis_wait spack install boost@1.62.0~graph~iostream~locale~log~wave
@@ -1034,6 +1415,176 @@ The main points that are implemented below:
      - make -j 2
      - make test
 
+.. _workflow_create_docker_image:
+
+-----------------------------------
+Using Spack to Create Docker Images
+-----------------------------------
+
+Spack can be the ideal tool to set up images for Docker (and Singularity).
+
+An example ``Dockerfile`` is given below, downloading the latest spack
+version.
+
+The following functionality is prepared:
+
+#. Base image: the example starts from a minimal ubuntu.
+
+#. Installing as root: docker images are usually set up as root.
+   Since some autotools scripts might complain about this being unsafe, we set
+   ``FORCE_UNSAFE_CONFIGURE=1`` to avoid configure errors.
+
+#. Pre-install the spack dependencies, including modules from the packages.
+   This avoids needing to build those from scratch via ``spack bootstrap``.
+   Package installs are followed by a clean-up of the system package index,
+   to avoid outdated information and it saves space.
+
+#. Install spack in ``/usr/local``.
+   Add ``setup-env.sh`` to profile scripts, so commands in *login* shells
+   can use the whole spack functionality, including modules.
+
+#. Install an example package (``tar``).
+   As with system package managers above, ``spack install`` commands should be
+   concatenated with a ``&& spack clean -a`` in order to keep image sizes small.
+
+#. Add a startup hook to an *interactive login shell* so spack modules will be
+   usable.
+
+In order to build and run the image, execute:
+
+.. code-block:: bash
+
+   docker build -t spack .
+   docker run -it spack
+
+.. code-block:: docker
+
+   FROM       ubuntu:16.04
+   MAINTAINER Your Name <someone@example.com>
+
+   # general environment for docker
+   ENV        DEBIAN_FRONTEND=noninteractive \
+              SPACK_ROOT=/usr/local \
+              FORCE_UNSAFE_CONFIGURE=1
+
+   # install minimal spack depedencies
+   RUN        apt-get update \
+              && apt-get install -y --no-install-recommends \
+                 autoconf \
+                 build-essential \
+                 ca-certificates \
+                 coreutils \
+                 curl \
+                 environment-modules \
+                 git \
+                 python \
+                 unzip \
+                 vim \
+              && rm -rf /var/lib/apt/lists/*
+
+   # load spack environment on login
+   RUN        echo "source $SPACK_ROOT/share/spack/setup-env.sh" \
+              > /etc/profile.d/spack.sh
+
+   # spack settings
+   # note: if you wish to change default settings, add files alongside
+   #       the Dockerfile with your desired settings. Then uncomment this line
+   #COPY       packages.yaml modules.yaml $SPACK_ROOT/etc/spack/
+
+   # install spack
+   RUN        curl -s -L https://api.github.com/repos/spack/spack/tarball \
+              | tar xzC $SPACK_ROOT --strip 1
+   # note: at this point one could also run ``spack bootstrap`` to avoid
+   #       parts of the long apt-get install list above
+
+   # install software
+   RUN        spack install tar \
+              && spack clean -a
+
+   # need the executables from a package already during image build?
+   #RUN        /bin/bash -l -c ' \
+   #                spack load tar \
+   #                && which tar'
+
+   # image run hook: the -l will make sure /etc/profile environments are loaded
+   CMD        /bin/bash -l
+
+^^^^^^^^^^^^^^
+Best Practices
+^^^^^^^^^^^^^^
+
+"""
+MPI
+"""
+Due to the dependency on Fortran for OpenMPI, which is the spack default
+implementation, consider adding ``gfortran`` to the ``apt-get install`` list.
+
+Recent versions of OpenMPI will require you to pass ``--allow-run-as-root``
+to your ``mpirun`` calls if started as root user inside Docker.
+
+For execution on HPC clusters, it can be helpful to import the docker
+image into Singularity in order to start a program with an *external*
+MPI. Otherwise, also add ``openssh-server`` to the ``apt-get install`` list.
+
+""""
+CUDA
+""""
+Starting from CUDA 9.0, Nvidia provides minimal CUDA images based on
+Ubuntu.
+Please see `their instructions <https://hub.docker.com/r/nvidia/cuda/>`_.
+Avoid double-installing CUDA by adding, e.g.
+
+.. code-block:: yaml
+
+   packages:
+     cuda:
+       paths:
+         cuda@9.0.176%gcc@5.4.0 arch=linux-ubuntu16-x86_64: /usr/local/cuda
+       buildable: False
+
+to your ``packages.yaml``.
+Then ``COPY`` in that file into the image as in the example above.
+
+Users will either need ``nvidia-docker`` or e.g. Singularity to *execute*
+device kernels.
+
+"""""""""""
+Singularity
+"""""""""""
+Importing and running the image created above into
+`Singularity <http://singularity.lbl.gov/>`_ works like a charm.
+Just use the `docker bootstraping mechanism <http://singularity.lbl.gov/quickstart#bootstrap-recipes>`_:
+
+.. code-block:: none
+
+   Bootstrap: docker
+   From: registry/user/image:tag
+
+   %runscript
+   exec /bin/bash -l
+
+""""""""""""""""""""""
+Docker for Development
+""""""""""""""""""""""
+
+For examples of how we use docker in development, see
+:ref:`docker_for_developers`.
+
+"""""""""""""""""""""""""
+Docker on Windows and OSX
+"""""""""""""""""""""""""
+
+On Mac OS and Windows, docker runs on a hypervisor that is not allocated much
+memory by default, and some spack packages may fail to build due to lack of
+memory. To work around this issue, consider configuring your docker installation
+to use more of your host memory. In some cases, you can also ease the memory
+pressure on parallel builds by limiting the parallelism in your config.yaml.
+
+.. code-block:: yaml
+
+   config:
+     build_jobs: 2
+
 ------------------
 Upstream Bug Fixes
 ------------------

lib/spack/env/aocc/clang

@@ -1 +0,0 @@
-../cc

lib/spack/env/aocc/clang++

@@ -1 +0,0 @@
-../cpp

lib/spack/env/aocc/flang

@@ -1 +0,0 @@
-../fc

lib/spack/env/cc

@@ -15,14 +15,14 @@
 # 1. It allows Spack to swap compilers into and out of builds easily.
 # 2. It adds several options to the compile line so that spack
 #    packages can find their dependencies at build time and run time:
-#      -I and/or -isystem arguments for dependency /include directories.
-#      -L                 arguments for dependency /lib directories.
-#      -Wl,-rpath         arguments for dependency /lib directories.
+#      -I           arguments for dependency /include directories.
+#      -L           arguments for dependency /lib directories.
+#      -Wl,-rpath   arguments for dependency /lib directories.
 #
 
 # This is an array of environment variables that need to be set before
 # the script runs. They are set by routines in spack.build_environment
-# as part of the package installation process.
+# as part of spack.package.Package.do_install().
 parameters=(
     SPACK_ENV_PATH
     SPACK_DEBUG_LOG_DIR
@@ -43,7 +43,7 @@ parameters=(
 # The compiler input variables are checked for sanity later:
 #   SPACK_CC, SPACK_CXX, SPACK_F77, SPACK_FC
 # The default compiler flags are passed from these variables:
-#   SPACK_CFLAGS, SPACK_CXXFLAGS, SPACK_FFLAGS,
+#   SPACK_CFLAGS, SPACK_CXXFLAGS, SPACK_FCFLAGS, SPACK_FFLAGS,
 #   SPACK_LDFLAGS, SPACK_LDLIBS
 # Debug env var is optional; set to "TRUE" for debug logging:
 #   SPACK_DEBUG
@@ -107,25 +107,25 @@ case "$command" in
     cpp)
         mode=cpp
         ;;
-    cc|c89|c99|gcc|clang|armclang|icc|icx|pgcc|nvc|xlc|xlc_r|fcc)
+    cc|c89|c99|gcc|clang|armclang|icc|pgcc|xlc|xlc_r|fcc)
         command="$SPACK_CC"
         language="C"
         comp="CC"
         lang_flags=C
         ;;
-    c++|CC|g++|clang++|armclang++|icpc|icpx|pgc++|nvc++|xlc++|xlc++_r|FCC)
+    c++|CC|g++|clang++|armclang++|icpc|pgc++|xlc++|xlc++_r|FCC)
         command="$SPACK_CXX"
         language="C++"
         comp="CXX"
         lang_flags=CXX
         ;;
-    ftn|f90|fc|f95|gfortran|flang|armflang|ifort|ifx|pgfortran|nvfortran|xlf90|xlf90_r|nagfor|frt)
+    ftn|f90|fc|f95|gfortran|flang|armflang|ifort|pgfortran|xlf90|xlf90_r|nagfor|frt)
         command="$SPACK_FC"
         language="Fortran 90"
         comp="FC"
         lang_flags=F
         ;;
-    f77|xlf|xlf_r|pgf77|frt|flang)
+    f77|xlf|xlf_r|pgf77|frt)
         command="$SPACK_F77"
         language="Fortran 77"
         comp="F77"
@@ -251,11 +251,10 @@ input_command="$*"
 #
 # Parse the command line arguments.
 #
-# We extract -L, -I, -isystem and -Wl,-rpath arguments from the
-# command line and recombine them with Spack arguments later.  We
-# parse these out so that we can make sure that system paths come
-# last, that package arguments come first, and that Spack arguments
-# are injected properly.
+# We extract -L, -I, and -Wl,-rpath arguments from the command line and
+# recombine them with Spack arguments later.  We parse these out so that
+# we can make sure that system paths come last, that package arguments
+# come first, and that Spack arguments are injected properly.
 #
 # All other arguments, including -l arguments, are treated as
 # 'other_args' and left in their original order.  This ensures that
@@ -274,24 +273,12 @@ system_libdirs=()
 system_rpaths=()
 libs=()
 other_args=()
-isystem_system_includes=()
-isystem_includes=()
 
 while [ -n "$1" ]; do
     # an RPATH to be added after the case statement.
     rp=""
 
     case "$1" in
-        -isystem*)
-            arg="${1#-isystem}"
-	    isystem_was_used=true
-            if [ -z "$arg" ]; then shift; arg="$1"; fi
-            if system_dir "$arg"; then
-                isystem_system_includes+=("$arg")
-            else
-                isystem_includes+=("$arg")
-            fi
-            ;;
         -I*)
             arg="${1#-I}"
             if [ -z "$arg" ]; then shift; arg="$1"; fi
@@ -438,6 +425,12 @@ then
     esac
 fi
 
+# Prepend include directories
+IFS=':' read -ra include_dirs <<< "$SPACK_INCLUDE_DIRS"
+if [[ $mode == cpp || $mode == cc || $mode == as || $mode == ccld ]]; then
+    includes=("${includes[@]}" "${include_dirs[@]}")
+fi
+
 IFS=':' read -ra rpath_dirs <<< "$SPACK_RPATH_DIRS"
 if [[ $mode == ccld || $mode == ld ]]; then
 
@@ -488,22 +481,9 @@ args=()
 # flags assembled earlier
 args+=("${flags[@]}")
 
-# Insert include directories just prior to any system include directories
-
+# include directory search paths
 for dir in "${includes[@]}";         do args+=("-I$dir"); done
-for dir in "${isystem_includes[@]}";         do args+=("-isystem$dir"); done
-
-IFS=':' read -ra spack_include_dirs <<< "$SPACK_INCLUDE_DIRS"
-if [[ $mode == cpp || $mode == cc || $mode == as || $mode == ccld ]]; then
-    if [[ "$isystem_was_used" == "true" ]] ; then
-	for dir in "${spack_include_dirs[@]}";  do args+=("-isystem$dir"); done
-    else
-	for dir in "${spack_include_dirs[@]}";  do args+=("-I$dir"); done
-    fi
-fi
-
 for dir in "${system_includes[@]}";  do args+=("-I$dir"); done
-for dir in "${isystem_system_includes[@]}";  do args+=("-isystem$dir"); done
 
 # Library search paths
 for dir in "${libdirs[@]}";          do args+=("-L$dir"); done

lib/spack/env/nvhpc/nvc

@@ -1 +0,0 @@
-../cc

lib/spack/env/nvhpc/nvc++

@@ -1 +0,0 @@
-../cc

lib/spack/env/nvhpc/nvfortran

@@ -1 +0,0 @@
-../cc

lib/spack/env/oneapi/icpx

@@ -1 +0,0 @@
-../cc

lib/spack/env/oneapi/icx

@@ -1 +0,0 @@
-../cc

lib/spack/env/oneapi/ifx

@@ -1 +0,0 @@
-../cc

lib/spack/external/__init__.py

@@ -6,13 +6,6 @@
 """This module contains the following external, potentially separately
 licensed, packages that are included in Spack:
 
-archspec
---------
-
-* Homepage: https://pypi.python.org/pypi/archspec
-* Usage: Labeling, comparison and detection of microarchitectures
-* Version: 0.1.2 (commit 2846749dc5b12ae2b30ff1d3f0270a4a5954710d)
-
 argparse
 --------
 
@@ -95,11 +88,10 @@
 * Homepage: https://pypi.python.org/pypi/pytest
 * Usage: Testing framework used by Spack.
 * Version: 3.2.5 (last version supporting Python 2.6)
-* Note: This package has been slightly modified:
-  * We improve Python 2.6 compatibility. See:
-    https://github.com/spack/spack/pull/6801.
-  * We have patched pytest not to depend on setuptools. See:
-    https://github.com/spack/spack/pull/15612
+* Note: This package has been slightly modified to improve
+  Python 2.6 compatibility. See the following commit if the
+  vendored copy ever needs to be updated again:
+  https://github.com/spack/spack/pull/6801/commits/ff513c39f2c67ff615de5cbc581dd69a8ec96526
 
 ruamel.yaml
 ------
@@ -133,5 +125,4 @@
 * Homepage: https://altgraph.readthedocs.io/en/latest/index.html
 * Usage: dependency of macholib
 * Version: 0.16.1
-
 """

lib/spack/external/_pytest/assertion/util.py

@@ -5,12 +5,9 @@
 import _pytest._code
 import py
 try:
-    from collections.abc import Sequence
+    from collections import Sequence
 except ImportError:
-    try:
-        from collections import Sequence
-    except ImportError:
-        Sequence = list
+    Sequence = list
 
 
 u = py.builtin._totext

lib/spack/external/_pytest/config.py

@@ -1028,13 +1028,34 @@ def _consider_importhook(self, args):
             except SystemError:
                 mode = 'plain'
             else:
-                # REMOVED FOR SPACK: This routine imports `pkg_resources` from
-                # `setuptools`, but we do not need it for Spack. We have removed
-                # it from Spack to avoid a dependency on setuptools.
-                # self._mark_plugins_for_rewrite(hook)
-                pass
+                self._mark_plugins_for_rewrite(hook)
         self._warn_about_missing_assertion(mode)
 
+    def _mark_plugins_for_rewrite(self, hook):
+        """
+        Given an importhook, mark for rewrite any top-level
+        modules or packages in the distribution package for
+        all pytest plugins.
+        """
+        import pkg_resources
+        self.pluginmanager.rewrite_hook = hook
+
+        # 'RECORD' available for plugins installed normally (pip install)
+        # 'SOURCES.txt' available for plugins installed in dev mode (pip install -e)
+        # for installed plugins 'SOURCES.txt' returns an empty list, and vice-versa
+        # so it shouldn't be an issue
+        metadata_files = 'RECORD', 'SOURCES.txt'
+
+        package_files = (
+            entry.split(',')[0]
+            for entrypoint in pkg_resources.iter_entry_points('pytest11')
+            for metadata in metadata_files
+            for entry in entrypoint.dist._get_metadata(metadata)
+        )
+
+        for name in _iter_rewritable_modules(package_files):
+            hook.mark_rewrite(name)
+
     def _warn_about_missing_assertion(self, mode):
         try:
             assert False
@@ -1060,12 +1081,7 @@ def _preparse(self, args, addopts=True):
         self._checkversion()
         self._consider_importhook(args)
         self.pluginmanager.consider_preparse(args)
-
-        # REMOVED FOR SPACK: This routine imports `pkg_resources` from
-        # `setuptools`, but we do not need it for Spack. We have removed
-        # it from Spack to avoid a dependency on setuptools.
-        # self.pluginmanager.load_setuptools_entrypoints('pytest11')
-
+        self.pluginmanager.load_setuptools_entrypoints('pytest11')
         self.pluginmanager.consider_env()
         self.known_args_namespace = ns = self._parser.parse_known_args(args, namespace=self.option.copy())
         if self.known_args_namespace.confcutdir is None and self.inifile:

lib/spack/external/_pytest/main.py

@@ -10,12 +10,9 @@
 import _pytest._code
 import py
 try:
-    from collections.abc import MutableMapping as MappingMixin
+    from collections import MutableMapping as MappingMixin
 except ImportError:
-    try:
-        from collections import MutableMapping as MappingMixin
-    except ImportError:
-        from UserDict import DictMixin as MappingMixin
+    from UserDict import DictMixin as MappingMixin
 
 from _pytest.config import directory_arg, UsageError, hookimpl
 from _pytest.outcomes import exit

lib/spack/external/_pytest/python_api.py

@@ -398,10 +398,7 @@ def approx(expected, rel=None, abs=None, nan_ok=False):
        __ https://docs.python.org/3/reference/datamodel.html#object.__ge__
     """
 
-    if sys.version_info >= (3, 3):
-        from collections.abc import Mapping, Sequence
-    else:
-        from collections import Mapping, Sequence
+    from collections import Mapping, Sequence
     from _pytest.compat import STRING_TYPES as String
 
     # Delegate the comparison to a class that knows how to deal with the type

lib/spack/external/_pytest/vendored_packages/pluggy.py

@@ -497,6 +497,26 @@ def check_pending(self):
                                 "unknown hook %r in plugin %r" %
                                 (name, hookimpl.plugin))
 
+    def load_setuptools_entrypoints(self, entrypoint_name):
+        """ Load modules from querying the specified setuptools entrypoint name.
+        Return the number of loaded plugins. """
+        from pkg_resources import (iter_entry_points, DistributionNotFound,
+                                   VersionConflict)
+        for ep in iter_entry_points(entrypoint_name):
+            # is the plugin registered or blocked?
+            if self.get_plugin(ep.name) or self.is_blocked(ep.name):
+                continue
+            try:
+                plugin = ep.load()
+            except DistributionNotFound:
+                continue
+            except VersionConflict as e:
+                raise PluginValidationError(
+                    "Plugin %r could not be loaded: %s!" % (ep.name, e))
+            self.register(plugin, name=ep.name)
+            self._plugin_distinfo.append((plugin, ep.dist))
+        return len(self._plugin_distinfo)
+
     def list_plugin_distinfo(self):
         """ return list of distinfo/plugin tuples for all setuptools registered
         plugins. """

lib/spack/external/altgraph/__init__.py

@@ -139,12 +139,9 @@
   @contributor: U{Reka Albert <http://www.phys.psu.edu/~ralbert/>}
 
 '''
-# import pkg_resources
-# __version__ = pkg_resources.require('altgraph')[0].version
-# pkg_resources is not finding the altgraph import despite the fact that it is in sys.path
-# there is no .dist-info or .egg-info for pkg_resources to query the version from
-# so it must be set manually
-__version__ = '0.16.1'
+import pkg_resources
+__version__ = pkg_resources.require('altgraph')[0].version
+
 
 class GraphError(ValueError):
     pass

lib/spack/external/archspec/COPYRIGHT

@@ -1,22 +0,0 @@
-Intellectual Property Notice
-------------------------------
-
-Archspec is licensed under the Apache License, Version 2.0 (LICENSE-APACHE
-or http://www.apache.org/licenses/LICENSE-2.0) or the MIT license,
-(LICENSE-MIT or http://opensource.org/licenses/MIT), at your option.
-
-Copyrights and patents in the Archspec project are retained by contributors.
-No copyright assignment is required to contribute to Archspec.
-
-
-SPDX usage
-------------
-
-Individual files contain SPDX tags instead of the full license text.
-This enables machine processing of license information based on the SPDX
-License Identifiers that are available here: https://spdx.org/licenses/
-
-Files that are dual-licensed as Apache-2.0 OR MIT contain the following
-text in the license header:
-
-    SPDX-License-Identifier: (Apache-2.0 OR MIT)

lib/spack/external/archspec/LICENSE-APACHE

@@ -1,202 +0,0 @@
-
-                                 Apache License
-                           Version 2.0, January 2004
-                        http://www.apache.org/licenses/
-
-   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
-
-   1. Definitions.
-
-      "License" shall mean the terms and conditions for use, reproduction,
-      and distribution as defined by Sections 1 through 9 of this document.
-
-      "Licensor" shall mean the copyright owner or entity authorized by
-      the copyright owner that is granting the License.
-
-      "Legal Entity" shall mean the union of the acting entity and all
-      other entities that control, are controlled by, or are under common
-      control with that entity. For the purposes of this definition,
-      "control" means (i) the power, direct or indirect, to cause the
-      direction or management of such entity, whether by contract or
-      otherwise, or (ii) ownership of fifty percent (50%) or more of the
-      outstanding shares, or (iii) beneficial ownership of such entity.
-
-      "You" (or "Your") shall mean an individual or Legal Entity
-      exercising permissions granted by this License.
-
-      "Source" form shall mean the preferred form for making modifications,
-      including but not limited to software source code, documentation
-      source, and configuration files.
-
-      "Object" form shall mean any form resulting from mechanical
-      transformation or translation of a Source form, including but
-      not limited to compiled object code, generated documentation,
-      and conversions to other media types.
-
-      "Work" shall mean the work of authorship, whether in Source or
-      Object form, made available under the License, as indicated by a
-      copyright notice that is included in or attached to the work
-      (an example is provided in the Appendix below).
-
-      "Derivative Works" shall mean any work, whether in Source or Object
-      form, that is based on (or derived from) the Work and for which the
-      editorial revisions, annotations, elaborations, or other modifications
-      represent, as a whole, an original work of authorship. For the purposes
-      of this License, Derivative Works shall not include works that remain
-      separable from, or merely link (or bind by name) to the interfaces of,
-      the Work and Derivative Works thereof.
-
-      "Contribution" shall mean any work of authorship, including
-      the original version of the Work and any modifications or additions
-      to that Work or Derivative Works thereof, that is intentionally
-      submitted to Licensor for inclusion in the Work by the copyright owner
-      or by an individual or Legal Entity authorized to submit on behalf of
-      the copyright owner. For the purposes of this definition, "submitted"
-      means any form of electronic, verbal, or written communication sent
-      to the Licensor or its representatives, including but not limited to
-      communication on electronic mailing lists, source code control systems,
-      and issue tracking systems that are managed by, or on behalf of, the
-      Licensor for the purpose of discussing and improving the Work, but
-      excluding communication that is conspicuously marked or otherwise
-      designated in writing by the copyright owner as "Not a Contribution."
-
-      "Contributor" shall mean Licensor and any individual or Legal Entity
-      on behalf of whom a Contribution has been received by Licensor and
-      subsequently incorporated within the Work.
-
-   2. Grant of Copyright License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      copyright license to reproduce, prepare Derivative Works of,
-      publicly display, publicly perform, sublicense, and distribute the
-      Work and such Derivative Works in Source or Object form.
-
-   3. Grant of Patent License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      (except as stated in this section) patent license to make, have made,
-      use, offer to sell, sell, import, and otherwise transfer the Work,
-      where such license applies only to those patent claims licensable
-      by such Contributor that are necessarily infringed by their
-      Contribution(s) alone or by combination of their Contribution(s)
-      with the Work to which such Contribution(s) was submitted. If You
-      institute patent litigation against any entity (including a
-      cross-claim or counterclaim in a lawsuit) alleging that the Work
-      or a Contribution incorporated within the Work constitutes direct
-      or contributory patent infringement, then any patent licenses
-      granted to You under this License for that Work shall terminate
-      as of the date such litigation is filed.
-
-   4. Redistribution. You may reproduce and distribute copies of the
-      Work or Derivative Works thereof in any medium, with or without
-      modifications, and in Source or Object form, provided that You
-      meet the following conditions:
-
-      (a) You must give any other recipients of the Work or
-          Derivative Works a copy of this License; and
-
-      (b) You must cause any modified files to carry prominent notices
-          stating that You changed the files; and
-
-      (c) You must retain, in the Source form of any Derivative Works
-          that You distribute, all copyright, patent, trademark, and
-          attribution notices from the Source form of the Work,
-          excluding those notices that do not pertain to any part of
-          the Derivative Works; and
-
-      (d) If the Work includes a "NOTICE" text file as part of its
-          distribution, then any Derivative Works that You distribute must
-          include a readable copy of the attribution notices contained
-          within such NOTICE file, excluding those notices that do not
-          pertain to any part of the Derivative Works, in at least one
-          of the following places: within a NOTICE text file distributed
-          as part of the Derivative Works; within the Source form or
-          documentation, if provided along with the Derivative Works; or,
-          within a display generated by the Derivative Works, if and
-          wherever such third-party notices normally appear. The contents
-          of the NOTICE file are for informational purposes only and
-          do not modify the License. You may add Your own attribution
-          notices within Derivative Works that You distribute, alongside
-          or as an addendum to the NOTICE text from the Work, provided
-          that such additional attribution notices cannot be construed
-          as modifying the License.
-
-      You may add Your own copyright statement to Your modifications and
-      may provide additional or different license terms and conditions
-      for use, reproduction, or distribution of Your modifications, or
-      for any such Derivative Works as a whole, provided Your use,
-      reproduction, and distribution of the Work otherwise complies with
-      the conditions stated in this License.
-
-   5. Submission of Contributions. Unless You explicitly state otherwise,
-      any Contribution intentionally submitted for inclusion in the Work
-      by You to the Licensor shall be under the terms and conditions of
-      this License, without any additional terms or conditions.
-      Notwithstanding the above, nothing herein shall supersede or modify
-      the terms of any separate license agreement you may have executed
-      with Licensor regarding such Contributions.
-
-   6. Trademarks. This License does not grant permission to use the trade
-      names, trademarks, service marks, or product names of the Licensor,
-      except as required for reasonable and customary use in describing the
-      origin of the Work and reproducing the content of the NOTICE file.
-
-   7. Disclaimer of Warranty. Unless required by applicable law or
-      agreed to in writing, Licensor provides the Work (and each
-      Contributor provides its Contributions) on an "AS IS" BASIS,
-      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-      implied, including, without limitation, any warranties or conditions
-      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
-      PARTICULAR PURPOSE. You are solely responsible for determining the
-      appropriateness of using or redistributing the Work and assume any
-      risks associated with Your exercise of permissions under this License.
-
-   8. Limitation of Liability. In no event and under no legal theory,
-      whether in tort (including negligence), contract, or otherwise,
-      unless required by applicable law (such as deliberate and grossly
-      negligent acts) or agreed to in writing, shall any Contributor be
-      liable to You for damages, including any direct, indirect, special,
-      incidental, or consequential damages of any character arising as a
-      result of this License or out of the use or inability to use the
-      Work (including but not limited to damages for loss of goodwill,
-      work stoppage, computer failure or malfunction, or any and all
-      other commercial damages or losses), even if such Contributor
-      has been advised of the possibility of such damages.
-
-   9. Accepting Warranty or Additional Liability. While redistributing
-      the Work or Derivative Works thereof, You may choose to offer,
-      and charge a fee for, acceptance of support, warranty, indemnity,
-      or other liability obligations and/or rights consistent with this
-      License. However, in accepting such obligations, You may act only
-      on Your own behalf and on Your sole responsibility, not on behalf
-      of any other Contributor, and only if You agree to indemnify,
-      defend, and hold each Contributor harmless for any liability
-      incurred by, or claims asserted against, such Contributor by reason
-      of your accepting any such warranty or additional liability.
-
-   END OF TERMS AND CONDITIONS
-
-   APPENDIX: How to apply the Apache License to your work.
-
-      To apply the Apache License to your work, attach the following
-      boilerplate notice, with the fields enclosed by brackets "[]"
-      replaced with your own identifying information. (Don't include
-      the brackets!)  The text should be enclosed in the appropriate
-      comment syntax for the file format. We also recommend that a
-      file or class name and description of purpose be included on the
-      same "printed page" as the copyright notice for easier
-      identification within third-party archives.
-
-   Copyright [yyyy] [name of copyright owner]
-
-   Licensed under the Apache License, Version 2.0 (the "License");
-   you may not use this file except in compliance with the License.
-   You may obtain a copy of the License at
-
-       http://www.apache.org/licenses/LICENSE-2.0
-
-   Unless required by applicable law or agreed to in writing, software
-   distributed under the License is distributed on an "AS IS" BASIS,
-   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-   See the License for the specific language governing permissions and
-   limitations under the License.

lib/spack/external/archspec/LICENSE-MIT

@@ -1,20 +0,0 @@
-Copyright 2019-2020 Lawrence Livermore National Security, LLC and other
-Archspec Project Developers. See the top-level COPYRIGHT file for details.
-
-Permission is hereby granted, free of charge, to any person obtaining a
-copy of this software and associated documentation files (the "Software"),
-to deal in the Software without restriction, including without limitation
-the rights to use, copy, modify, merge, publish, distribute, sublicense,
-and/or sell copies of the Software, and to permit persons to whom the
-Software is furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in
-all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
-DEALINGS IN THE SOFTWARE.

lib/spack/external/archspec/README.md

@@ -1,68 +0,0 @@
-[![](https://github.com/archspec/archspec/workflows/Unit%20tests/badge.svg)](https://github.com/archspec/archspec/actions)
-[![codecov](https://codecov.io/gh/archspec/archspec/branch/master/graph/badge.svg)](https://codecov.io/gh/archspec/archspec)
-[![Documentation Status](https://readthedocs.org/projects/archspec/badge/?version=latest)](https://archspec.readthedocs.io/en/latest/?badge=latest)
-
-
-# Archspec (Python bindings)
-
-Archspec aims at providing a standard set of human-understandable labels for
-various aspects of a system architecture  like CPU, network fabrics, etc. and
-APIs to detect, query and compare them.
-
-This project grew out of [Spack](https://spack.io/) and is currently under
-active development. At present it supports APIs to detect and model
-compatibility relationships among different CPU microarchitectures.
-
-## Getting started with development
-
-The `archspec` Python package needs [poetry](https://python-poetry.org/) to
-be installed from VCS sources. The preferred method to install it is via
-its custom installer outside of any virtual environment:
-```console
-$ curl -sSL https://raw.githubusercontent.com/python-poetry/poetry/master/get-poetry.py | python
-```
-You can refer to [Poetry's documentation](https://python-poetry.org/docs/#installation)
-for further details or for other methods to install this tool. You'll also need `tox`
-to run unit test:
-```console
-$ pip install --user tox
-```
-Finally you'll need to clone the repository:
-```console
-$ git clone --recursive https://github.com/archspec/archspec.git
-```
-
-### Running unit tests
-Once you have your environment ready you can run `archspec` unit tests
-using ``tox`` from the root of the repository:
-```console
-$ tox
-  [ ... ]
-  py27: commands succeeded
-  py35: commands succeeded
-  py36: commands succeeded
-  py37: commands succeeded
-  py38: commands succeeded
-  pylint: commands succeeded
-  flake8: commands succeeded
-  black: commands succeeded
-  congratulations :)
-```
-
-## License
-
-Archspec is distributed under the terms of both the MIT license and the
-Apache License (Version 2.0). Users may choose either license, at their
-option.
-
-All new contributions must be made under both the MIT and Apache-2.0
-licenses.
-
-See [LICENSE-MIT](https://github.com/archspec/archspec/blob/master/LICENSE-MIT),
-[LICENSE-APACHE](https://github.com/archspec/archspec/blob/master/LICENSE-APACHE),
-[COPYRIGHT](https://github.com/archspec/archspec/blob/master/COPYRIGHT), and
-[NOTICE](https://github.com/archspec/archspec/blob/master/NOTICE) for details.
-
-SPDX-License-Identifier: (Apache-2.0 OR MIT)
-
-LLNL-CODE-811653

lib/spack/external/archspec/__init__.py

@@ -1,2 +0,0 @@
-"""Init file to avoid namespace packages"""
-__version__ = "0.1.1"

lib/spack/external/archspec/cli.py

@@ -1,24 +0,0 @@
-# Copyright 2019-2020 Lawrence Livermore National Security, LLC and other
-# Archspec Project Developers. See the top-level COPYRIGHT file for details.
-#
-# SPDX-License-Identifier: (Apache-2.0 OR MIT)
-"""
-archspec command line interface
-"""
-
-import click
-
-import archspec
-import archspec.cpu
-
-
-@click.group(name="archspec")
-@click.version_option(version=archspec.__version__)
-def main():
-    """archspec command line interface"""
-
-
-@main.command()
-def cpu():
-    """archspec command line interface for CPU"""
-    click.echo(archspec.cpu.host())

lib/spack/external/archspec/cpu/__init__.py

@@ -1,20 +0,0 @@
-# Copyright 2019-2020 Lawrence Livermore National Security, LLC and other
-# Archspec Project Developers. See the top-level COPYRIGHT file for details.
-#
-# SPDX-License-Identifier: (Apache-2.0 OR MIT)
-"""The "cpu" package permits to query and compare different
-CPU microarchitectures.
-"""
-from .microarchitecture import Microarchitecture, UnsupportedMicroarchitecture
-from .microarchitecture import TARGETS, generic_microarchitecture
-from .microarchitecture import version_components
-from .detect import host
-
-__all__ = [
-    "Microarchitecture",
-    "UnsupportedMicroarchitecture",
-    "TARGETS",
-    "generic_microarchitecture",
-    "host",
-    "version_components",
-]

lib/spack/external/archspec/cpu/alias.py

@@ -1,88 +0,0 @@
-# Copyright 2019-2020 Lawrence Livermore National Security, LLC and other
-# Archspec Project Developers. See the top-level COPYRIGHT file for details.
-#
-# SPDX-License-Identifier: (Apache-2.0 OR MIT)
-"""Aliases for microarchitecture features."""
-# pylint: disable=useless-object-inheritance
-from .schema import TARGETS_JSON, LazyDictionary
-
-_FEATURE_ALIAS_PREDICATE = {}
-
-
-class FeatureAliasTest(object):
-    """A test that must be passed for a feature alias to succeed.
-
-    Args:
-        rules (dict): dictionary of rules to be met. Each key must be a
-            valid alias predicate
-    """
-
-    # pylint: disable=too-few-public-methods
-    def __init__(self, rules):
-        self.rules = rules
-        self.predicates = []
-        for name, args in rules.items():
-            self.predicates.append(_FEATURE_ALIAS_PREDICATE[name](args))
-
-    def __call__(self, microarchitecture):
-        return all(feature_test(microarchitecture) for feature_test in self.predicates)
-
-
-def _feature_aliases():
-    """Returns the dictionary of all defined feature aliases."""
-    json_data = TARGETS_JSON["feature_aliases"]
-    aliases = {}
-    for alias, rules in json_data.items():
-        aliases[alias] = FeatureAliasTest(rules)
-    return aliases
-
-
-FEATURE_ALIASES = LazyDictionary(_feature_aliases)
-
-
-def alias_predicate(func):
-    """Decorator to register a predicate that can be used to evaluate
-    feature aliases.
-    """
-    name = func.__name__
-
-    # Check we didn't register anything else with the same name
-    if name in _FEATURE_ALIAS_PREDICATE:
-        msg = 'the alias predicate "{0}" already exists'.format(name)
-        raise KeyError(msg)
-
-    _FEATURE_ALIAS_PREDICATE[name] = func
-
-    return func
-
-
-@alias_predicate
-def reason(_):
-    """This predicate returns always True and it's there to allow writing
-    a documentation string in the JSON file to explain why an alias is needed.
-    """
-    return lambda x: True
-
-
-@alias_predicate
-def any_of(list_of_features):
-    """Returns a predicate that is True if any of the feature in the
-    list is in the microarchitecture being tested, False otherwise.
-    """
-
-    def _impl(microarchitecture):
-        return any(x in microarchitecture for x in list_of_features)
-
-    return _impl
-
-
-@alias_predicate
-def families(list_of_families):
-    """Returns a predicate that is True if the architecture family of
-    the microarchitecture being tested is in the list, False otherwise.
-    """
-
-    def _impl(microarchitecture):
-        return str(microarchitecture.family) in list_of_families
-
-    return _impl

lib/spack/external/archspec/cpu/schema.py

@@ -1,70 +0,0 @@
-# Copyright 2019-2020 Lawrence Livermore National Security, LLC and other
-# Archspec Project Developers. See the top-level COPYRIGHT file for details.
-#
-# SPDX-License-Identifier: (Apache-2.0 OR MIT)
-"""Global objects with the content of the microarchitecture
-JSON file and its schema
-"""
-import json
-import os.path
-
-try:
-    from collections.abc import MutableMapping  # novm
-except ImportError:
-    from collections import MutableMapping
-
-
-class LazyDictionary(MutableMapping):
-    """Lazy dictionary that gets constructed on first access to any object key
-
-    Args:
-        factory (callable): factory function to construct the dictionary
-    """
-
-    def __init__(self, factory, *args, **kwargs):
-        self.factory = factory
-        self.args = args
-        self.kwargs = kwargs
-        self._data = None
-
-    @property
-    def data(self):
-        """Returns the lazily constructed dictionary"""
-        if self._data is None:
-            self._data = self.factory(*self.args, **self.kwargs)
-        return self._data
-
-    def __getitem__(self, key):
-        return self.data[key]
-
-    def __setitem__(self, key, value):
-        self.data[key] = value
-
-    def __delitem__(self, key):
-        del self.data[key]
-
-    def __iter__(self):
-        return iter(self.data)
-
-    def __len__(self):
-        return len(self.data)
-
-
-def _load_json_file(json_file):
-    json_dir = os.path.join(os.path.dirname(__file__), "..", "json", "cpu")
-    json_dir = os.path.abspath(json_dir)
-
-    def _factory():
-        filename = os.path.join(json_dir, json_file)
-        with open(filename, "r") as file:
-            return json.load(file)
-
-    return _factory
-
-
-#: In memory representation of the data in microarchitectures.json,
-#: loaded on first access
-TARGETS_JSON = LazyDictionary(_load_json_file("microarchitectures.json"))
-
-#: JSON schema for microarchitectures.json, loaded on first access
-SCHEMA = LazyDictionary(_load_json_file("microarchitectures_schema.json"))

lib/spack/external/archspec/json/COPYRIGHT

@@ -1,22 +0,0 @@
-Intellectual Property Notice
-------------------------------
-
-Archspec is licensed under the Apache License, Version 2.0 (LICENSE-APACHE
-or http://www.apache.org/licenses/LICENSE-2.0) or the MIT license,
-(LICENSE-MIT or http://opensource.org/licenses/MIT), at your option.
-
-Copyrights and patents in the Archspec project are retained by contributors.
-No copyright assignment is required to contribute to Archspec.
-
-
-SPDX usage
-------------
-
-Individual files contain SPDX tags instead of the full license text.
-This enables machine processing of license information based on the SPDX
-License Identifiers that are available here: https://spdx.org/licenses/
-
-Files that are dual-licensed as Apache-2.0 OR MIT contain the following
-text in the license header:
-
-    SPDX-License-Identifier: (Apache-2.0 OR MIT)

lib/spack/external/archspec/json/LICENSE-APACHE

@@ -1,202 +0,0 @@
-
-                                 Apache License
-                           Version 2.0, January 2004
-                        http://www.apache.org/licenses/
-
-   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
-
-   1. Definitions.
-
-      "License" shall mean the terms and conditions for use, reproduction,
-      and distribution as defined by Sections 1 through 9 of this document.
-
-      "Licensor" shall mean the copyright owner or entity authorized by
-      the copyright owner that is granting the License.
-
-      "Legal Entity" shall mean the union of the acting entity and all
-      other entities that control, are controlled by, or are under common
-      control with that entity. For the purposes of this definition,
-      "control" means (i) the power, direct or indirect, to cause the
-      direction or management of such entity, whether by contract or
-      otherwise, or (ii) ownership of fifty percent (50%) or more of the
-      outstanding shares, or (iii) beneficial ownership of such entity.
-
-      "You" (or "Your") shall mean an individual or Legal Entity
-      exercising permissions granted by this License.
-
-      "Source" form shall mean the preferred form for making modifications,
-      including but not limited to software source code, documentation
-      source, and configuration files.
-
-      "Object" form shall mean any form resulting from mechanical
-      transformation or translation of a Source form, including but
-      not limited to compiled object code, generated documentation,
-      and conversions to other media types.
-
-      "Work" shall mean the work of authorship, whether in Source or
-      Object form, made available under the License, as indicated by a
-      copyright notice that is included in or attached to the work
-      (an example is provided in the Appendix below).
-
-      "Derivative Works" shall mean any work, whether in Source or Object
-      form, that is based on (or derived from) the Work and for which the
-      editorial revisions, annotations, elaborations, or other modifications
-      represent, as a whole, an original work of authorship. For the purposes
-      of this License, Derivative Works shall not include works that remain
-      separable from, or merely link (or bind by name) to the interfaces of,
-      the Work and Derivative Works thereof.
-
-      "Contribution" shall mean any work of authorship, including
-      the original version of the Work and any modifications or additions
-      to that Work or Derivative Works thereof, that is intentionally
-      submitted to Licensor for inclusion in the Work by the copyright owner
-      or by an individual or Legal Entity authorized to submit on behalf of
-      the copyright owner. For the purposes of this definition, "submitted"
-      means any form of electronic, verbal, or written communication sent
-      to the Licensor or its representatives, including but not limited to
-      communication on electronic mailing lists, source code control systems,
-      and issue tracking systems that are managed by, or on behalf of, the
-      Licensor for the purpose of discussing and improving the Work, but
-      excluding communication that is conspicuously marked or otherwise
-      designated in writing by the copyright owner as "Not a Contribution."
-
-      "Contributor" shall mean Licensor and any individual or Legal Entity
-      on behalf of whom a Contribution has been received by Licensor and
-      subsequently incorporated within the Work.
-
-   2. Grant of Copyright License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      copyright license to reproduce, prepare Derivative Works of,
-      publicly display, publicly perform, sublicense, and distribute the
-      Work and such Derivative Works in Source or Object form.
-
-   3. Grant of Patent License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      (except as stated in this section) patent license to make, have made,
-      use, offer to sell, sell, import, and otherwise transfer the Work,
-      where such license applies only to those patent claims licensable
-      by such Contributor that are necessarily infringed by their
-      Contribution(s) alone or by combination of their Contribution(s)
-      with the Work to which such Contribution(s) was submitted. If You
-      institute patent litigation against any entity (including a
-      cross-claim or counterclaim in a lawsuit) alleging that the Work
-      or a Contribution incorporated within the Work constitutes direct
-      or contributory patent infringement, then any patent licenses
-      granted to You under this License for that Work shall terminate
-      as of the date such litigation is filed.
-
-   4. Redistribution. You may reproduce and distribute copies of the
-      Work or Derivative Works thereof in any medium, with or without
-      modifications, and in Source or Object form, provided that You
-      meet the following conditions:
-
-      (a) You must give any other recipients of the Work or
-          Derivative Works a copy of this License; and
-
-      (b) You must cause any modified files to carry prominent notices
-          stating that You changed the files; and
-
-      (c) You must retain, in the Source form of any Derivative Works
-          that You distribute, all copyright, patent, trademark, and
-          attribution notices from the Source form of the Work,
-          excluding those notices that do not pertain to any part of
-          the Derivative Works; and
-
-      (d) If the Work includes a "NOTICE" text file as part of its
-          distribution, then any Derivative Works that You distribute must
-          include a readable copy of the attribution notices contained
-          within such NOTICE file, excluding those notices that do not
-          pertain to any part of the Derivative Works, in at least one
-          of the following places: within a NOTICE text file distributed
-          as part of the Derivative Works; within the Source form or
-          documentation, if provided along with the Derivative Works; or,
-          within a display generated by the Derivative Works, if and
-          wherever such third-party notices normally appear. The contents
-          of the NOTICE file are for informational purposes only and
-          do not modify the License. You may add Your own attribution
-          notices within Derivative Works that You distribute, alongside
-          or as an addendum to the NOTICE text from the Work, provided
-          that such additional attribution notices cannot be construed
-          as modifying the License.
-
-      You may add Your own copyright statement to Your modifications and
-      may provide additional or different license terms and conditions
-      for use, reproduction, or distribution of Your modifications, or
-      for any such Derivative Works as a whole, provided Your use,
-      reproduction, and distribution of the Work otherwise complies with
-      the conditions stated in this License.
-
-   5. Submission of Contributions. Unless You explicitly state otherwise,
-      any Contribution intentionally submitted for inclusion in the Work
-      by You to the Licensor shall be under the terms and conditions of
-      this License, without any additional terms or conditions.
-      Notwithstanding the above, nothing herein shall supersede or modify
-      the terms of any separate license agreement you may have executed
-      with Licensor regarding such Contributions.
-
-   6. Trademarks. This License does not grant permission to use the trade
-      names, trademarks, service marks, or product names of the Licensor,
-      except as required for reasonable and customary use in describing the
-      origin of the Work and reproducing the content of the NOTICE file.
-
-   7. Disclaimer of Warranty. Unless required by applicable law or
-      agreed to in writing, Licensor provides the Work (and each
-      Contributor provides its Contributions) on an "AS IS" BASIS,
-      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-      implied, including, without limitation, any warranties or conditions
-      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
-      PARTICULAR PURPOSE. You are solely responsible for determining the
-      appropriateness of using or redistributing the Work and assume any
-      risks associated with Your exercise of permissions under this License.
-
-   8. Limitation of Liability. In no event and under no legal theory,
-      whether in tort (including negligence), contract, or otherwise,
-      unless required by applicable law (such as deliberate and grossly
-      negligent acts) or agreed to in writing, shall any Contributor be
-      liable to You for damages, including any direct, indirect, special,
-      incidental, or consequential damages of any character arising as a
-      result of this License or out of the use or inability to use the
-      Work (including but not limited to damages for loss of goodwill,
-      work stoppage, computer failure or malfunction, or any and all
-      other commercial damages or losses), even if such Contributor
-      has been advised of the possibility of such damages.
-
-   9. Accepting Warranty or Additional Liability. While redistributing
-      the Work or Derivative Works thereof, You may choose to offer,
-      and charge a fee for, acceptance of support, warranty, indemnity,
-      or other liability obligations and/or rights consistent with this
-      License. However, in accepting such obligations, You may act only
-      on Your own behalf and on Your sole responsibility, not on behalf
-      of any other Contributor, and only if You agree to indemnify,
-      defend, and hold each Contributor harmless for any liability
-      incurred by, or claims asserted against, such Contributor by reason
-      of your accepting any such warranty or additional liability.
-
-   END OF TERMS AND CONDITIONS
-
-   APPENDIX: How to apply the Apache License to your work.
-
-      To apply the Apache License to your work, attach the following
-      boilerplate notice, with the fields enclosed by brackets "[]"
-      replaced with your own identifying information. (Don't include
-      the brackets!)  The text should be enclosed in the appropriate
-      comment syntax for the file format. We also recommend that a
-      file or class name and description of purpose be included on the
-      same "printed page" as the copyright notice for easier
-      identification within third-party archives.
-
-   Copyright [yyyy] [name of copyright owner]
-
-   Licensed under the Apache License, Version 2.0 (the "License");
-   you may not use this file except in compliance with the License.
-   You may obtain a copy of the License at
-
-       http://www.apache.org/licenses/LICENSE-2.0
-
-   Unless required by applicable law or agreed to in writing, software
-   distributed under the License is distributed on an "AS IS" BASIS,
-   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-   See the License for the specific language governing permissions and
-   limitations under the License.

lib/spack/external/archspec/json/LICENSE-MIT

@@ -1,20 +0,0 @@
-Copyright 2019-2020 Lawrence Livermore National Security, LLC and other
-Archspec Project Developers. See the top-level COPYRIGHT file for details.
-
-Permission is hereby granted, free of charge, to any person obtaining a
-copy of this software and associated documentation files (the "Software"),
-to deal in the Software without restriction, including without limitation
-the rights to use, copy, modify, merge, publish, distribute, sublicense,
-and/or sell copies of the Software, and to permit persons to whom the
-Software is furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in
-all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
-DEALINGS IN THE SOFTWARE.

lib/spack/external/archspec/json/NOTICE

@@ -1,21 +0,0 @@
-This work was produced under the auspices of the U.S. Department of
-Energy by Lawrence Livermore National Laboratory under Contract
-DE-AC52-07NA27344.
-
-This work was prepared as an account of work sponsored by an agency of
-the United States Government. Neither the United States Government nor
-Lawrence Livermore National Security, LLC, nor any of their employees
-makes any warranty, expressed or implied, or assumes any legal liability
-or responsibility for the accuracy, completeness, or usefulness of any
-information, apparatus, product, or process disclosed, or represents that
-its use would not infringe privately owned rights.
-
-Reference herein to any specific commercial product, process, or service
-by trade name, trademark, manufacturer, or otherwise does not necessarily
-constitute or imply its endorsement, recommendation, or favoring by the
-United States Government or Lawrence Livermore National Security, LLC.
-
-The views and opinions of authors expressed herein do not necessarily
-state or reflect those of the United States Government or Lawrence
-Livermore National Security, LLC, and shall not be used for advertising
-or product endorsement purposes.

lib/spack/external/archspec/json/README.md

@@ -1,36 +0,0 @@
-[![](https://github.com/archspec/archspec-json/workflows/JSON%20Validation/badge.svg)](https://github.com/archspec/archspec-json/actions)
-
-# Archspec-json
-
-The [archspec-json](https://github.com/archspec/archspec-json) repository is part of the
-[Archspec](https://github.com/archspec) project. It contains data on various architectural
-aspects of a platform stored in JSON format and is meant to be used as a base to develop
-language specific APIs.
-
-Currently the repository contains the following JSON files:
-```console
-.
-├── COPYRIGHT
-└── cpu
-    ├── microarchitectures.json         # Contains information on CPU microarchitectures
-    └── microarchitectures_schema.json  # Schema for the file above
- ```
-
-
-## License
-
-Archspec is distributed under the terms of both the MIT license and the
-Apache License (Version 2.0). Users may choose either license, at their
-option.
-
-All new contributions must be made under both the MIT and Apache-2.0
-licenses.
-
-See [LICENSE-MIT](https://github.com/archspec/archspec-json/blob/master/LICENSE-MIT),
-[LICENSE-APACHE](https://github.com/archspec/archspec-json/blob/master/LICENSE-APACHE),
-[COPYRIGHT](https://github.com/archspec/archspec-json/blob/master/COPYRIGHT), and
-[NOTICE](https://github.com/archspec/archspec-json/blob/master/NOTICE) for details.
-
-SPDX-License-Identifier: (Apache-2.0 OR MIT)
-
-LLNL-CODE-811653

lib/spack/external/archspec/json/cpu/microarchitectures_schema.json

@@ -1,110 +0,0 @@
-{
-  "$schema": "http://json-schema.org/draft-07/schema#",
-  "title": "Schema for microarchitecture definitions and feature aliases",
-  "type": "object",
-  "additionalProperties": false,
-  "properties": {
-    "microarchitectures": {
-      "type": "object",
-      "patternProperties": {
-        "([\\w]*)": {
-          "type": "object",
-          "properties": {
-            "from": {
-              "$comment": "More than one parent",
-              "type": "array",
-              "items": {
-                "type": "string"
-              }
-            },
-            "vendor": {
-              "type": "string"
-            },
-            "features": {
-              "type": "array",
-              "items": {
-                "type": "string"
-              }
-            },
-            "compilers": {
-              "type": "object",
-              "patternProperties": {
-                "([\\w]*)": {
-                  "$comment": "Permit multiple entries since compilers change options across versions",
-                  "type": "array",
-                  "items": {
-                    "type": "object",
-                    "properties": {
-                      "versions": {
-                        "type": "string"
-                      },
-                      "name": {
-                        "type": "string"
-                      },
-                      "flags": {
-                        "type": "string"
-                      }
-                    },
-                    "required": [
-                      "versions",
-                      "flags"
-                    ]
-                  }
-                }
-              }
-            }
-          },
-          "required": [
-            "from",
-            "vendor",
-            "features"
-          ]
-        }
-      }
-    },
-    "feature_aliases": {
-      "type": "object",
-      "patternProperties": {
-        "([\\w]*)": {
-          "type": "object",
-          "properties": {
-            "reason": {
-              "$comment": "Comment containing the reason why an alias is there",
-              "type": "string"
-            },
-            "any_of": {
-              "$comment": "The alias is true if any of the items is a feature of the target",
-              "type": "array",
-              "items": {
-                "type": "string"
-              }
-            },
-            "families": {
-              "$comment": "The alias is true if the family of the target is in this list",
-              "type": "array",
-              "items": {
-                "type": "string"
-              }
-            }
-          },
-          "additionalProperties": false
-        }
-      }
-    },
-    "conversions": {
-      "type": "object",
-      "properties": {
-        "description": {
-          "type": "string"
-        },
-        "arm_vendors": {
-          "type": "object"
-        },
-        "darwin_flags": {
-          "type": "object"
-        }
-      },
-      "additionalProperties": false
-    }
-  }
-}

lib/spack/external/ctest_log_parser.py

@@ -118,7 +118,6 @@ def match(self, text):
         "([^:]+): (Error:|error|undefined reference|multiply defined)",
         "([^ :]+) ?: (error|fatal error|catastrophic error)",
         "([^:]+)\\(([^\\)]+)\\) ?: (error|fatal error|catastrophic error)"),
-    "^FAILED",
     "^[Bb]us [Ee]rror",
     "^[Ss]egmentation [Vv]iolation",
     "^[Ss]egmentation [Ff]ault",

lib/spack/external/distro.py

@@ -64,7 +64,6 @@
     'enterpriseenterprise': 'oracle',  # Oracle Enterprise Linux
     'redhatenterpriseworkstation': 'rhel',  # RHEL 6, 7 Workstation
     'redhatenterpriseserver': 'rhel',  # RHEL 6, 7 Server
-    'redhatenterprisecomputenode': 'rhel',  # RHEL 6 ComputeNode
 }
 
 #: Translation table for normalizing the distro ID derived from the file name

lib/spack/external/jinja2/runtime.py

@@ -315,14 +315,10 @@ def __repr__(self):
 
 # register the context as mapping if possible
 try:
-    from collections.abc import Mapping
+    from collections import Mapping
     Mapping.register(Context)
 except ImportError:
-    try:
-        from collections import Mapping
-        Mapping.register(Context)
-    except ImportError:
-        pass
+    pass
 
 
 class BlockReference(object):

lib/spack/external/jinja2/sandbox.py

@@ -14,7 +14,7 @@
 """
 import types
 import operator
-import sys
+from collections import Mapping
 from jinja2.environment import Environment
 from jinja2.exceptions import SecurityError
 from jinja2._compat import string_types, PY2
@@ -23,11 +23,6 @@
 from markupsafe import EscapeFormatter
 from string import Formatter
 
-if sys.version_info >= (3, 3):
-    from collections.abc import Mapping
-else:
-    from collections import Mapping
-
 
 #: maximum number of items a range may produce
 MAX_RANGE = 100000
@@ -84,10 +79,7 @@
     pass
 
 #: register Python 2.6 abstract base classes
-if sys.version_info >= (3, 3):
-    from collections.abc import MutableSet, MutableMapping, MutableSequence
-else:
-    from collections import MutableSet, MutableMapping, MutableSequence
+from collections import MutableSet, MutableMapping, MutableSequence
 _mutable_set_types += (MutableSet,)
 _mutable_mapping_types += (MutableMapping,)
 _mutable_sequence_types += (MutableSequence,)

lib/spack/external/jinja2/tests.py

@@ -10,16 +10,11 @@
 """
 import operator
 import re
-import sys
+from collections import Mapping
 from jinja2.runtime import Undefined
 from jinja2._compat import text_type, string_types, integer_types
 import decimal
 
-if sys.version_info >= (3, 3):
-    from collections.abc import Mapping
-else:
-    from collections import Mapping
-
 number_re = re.compile(r'^-?\d+(\.\d+)?$')
 regex_type = type(number_re)
 

lib/spack/external/jinja2/utils.py

@@ -482,14 +482,10 @@ def __reversed__(self):
 
 # register the LRU cache as mutable mapping if possible
 try:
-    from collections.abc import MutableMapping
+    from collections import MutableMapping
     MutableMapping.register(LRUCache)
 except ImportError:
-    try:
-        from collections import MutableMapping
-        MutableMapping.register(LRUCache)
-    except ImportError:
-        pass
+    pass
 
 
 def select_autoescape(enabled_extensions=('html', 'htm', 'xml'),