add test, minor refactor to make testing easier

.codecov.yml

@@ -19,16 +19,3 @@ comment: off
 # annotations in files that seemingly have nothing to do with the PR.
 github_checks:
     annotations: false
-
-# Attempt to fix "Missing base commit" messages in the codecov UI.
-# Because we do not run full tests on package PRs, package PRs' merge
-# commits on `develop` don't have coverage info.  It appears that
-# codecov will give you an error if the pseudo-base's coverage data
-# doesn't all apply properly to the real PR base.
-#
-# See here for docs:
-#   https://docs.codecov.com/docs/comparing-commits#pseudo-comparison
-# See here for another potential solution:
-#   https://community.codecov.com/t/2480/15
-codecov:
-  allow_coverage_offsets: true

.coveragerc

@@ -0,0 +1,38 @@
+# -*- conf -*-
+# .coveragerc to control coverage.py
+[run]
+parallel = True
+concurrency = multiprocessing
+branch = True
+source =
+     bin
+     lib
+omit =
+     lib/spack/spack/test/*
+     lib/spack/docs/*
+     lib/spack/external/*
+     share/spack/qa/*
+
+[report]
+# Regexes for lines to exclude from consideration
+exclude_lines =
+    # Have to re-enable the standard pragma
+    pragma: no cover
+
+    # Don't complain about missing debug-only code:
+    def __repr__
+    if self\.debug
+
+    # Don't complain if tests don't hit defensive assertion code:
+    raise AssertionError
+    raise NotImplementedError
+
+    # Don't complain if non-runnable code isn't run:
+    if 0:
+    if False:
+    if __name__ == .__main__.:
+
+ignore_errors = True
+
+[html]
+directory = htmlcov

.flake8

@@ -1,25 +1,43 @@
 # -*- conf -*-
-# flake8 settings for Spack.
+# flake8 settings for Spack core files.
 #
 # These exceptions are for Spack core files. We're slightly more lenient
 # with packages.  See .flake8_packages for that.
 #
-# This is the only flake8 rule Spack violates somewhat flagrantly
+# E1: Indentation
+# - E129: visually indented line with same indent as next logical line
+#
+# E2: Whitespace
+# - E221: multiple spaces before operator
+# - E241: multiple spaces after ','
+# - E272: multiple spaces before keyword
+#
+# E7: Statement
 # - E731: do not assign a lambda expression, use a def
 #
-# This is the only flake8 exception needed when using Black.
-# - E203: white space around slice operators can be required, ignore : warn
+# W5: Line break warning
+# - W503: line break before binary operator
+# - W504: line break after binary operator
 #
-# We still allow these in packages (Would like to get rid of them or rely on mypy
-# in the future)
-# - F403: from/import * used; unable to detect undefined names
+# These are required to get the package.py files to test clean:
+# - F999: syntax error in doctest
+#
+# N8: PEP8-naming
+# - N801: class names should use CapWords convention
+# - N813: camelcase imported as lowercase
+# - N814: camelcase imported as constant
+#
+# F4: pyflakes import checks, these are now checked by mypy more precisely
+# - F403: from module import *
 # - F405: undefined name or from *
-# - F821: undefined name (needed with from/import *)
+#
+# Black ignores, these are incompatible with black style and do not follow PEP-8
+# - E203: white space around slice operators can be required, ignore : warn
+# - W503: see above, already ignored for line-breaks
 #
 [flake8]
-#ignore = E129,,W503,W504,F999,N801,N813,N814,F403,F405,E203
-extend-ignore = E731,E203
-max-line-length = 99
+ignore = E129,E221,E241,E272,E731,W503,W504,F999,N801,N813,N814,F403,F405
+max-line-length = 88
 
 # F4: Import
 # - F405: `name` may be undefined, or undefined from star imports: `module`
@@ -28,8 +46,7 @@ max-line-length = 99
 # - F821: undefined name `name`
 #
 per-file-ignores =
-  var/spack/repos/*/package.py:F403,F405,F821
-  *-ci-package.py:F403,F405,F821
+  var/spack/repos/*/package.py:F405,F821
 
 # exclude things we usually do not want linting for.
 # These still get linted when passed explicitly, as when spack flake8 passes

.git-blame-ignore-revs

@@ -1,3 +0,0 @@
-# .git-blame-ignore-revs
-# Formatted entire codebase with black
-f52f6e99dbf1131886a80112b8c79dfc414afb7c

.github/ISSUE_TEMPLATE/bug_report.md

@@ -0,0 +1,42 @@
+---
+name: "\U0001F41E Bug report"
+about: Report a bug in the core of Spack (command not working as expected, etc.)
+labels: "bug,triage"
+---
+
+<!-- Explain, in a clear and concise way, the command you ran and the result you were trying to achieve.
+Example: "I ran `spack find` to list all the installed packages and ..." -->
+
+### Steps to reproduce the issue
+
+```console
+$ spack <command1> <spec>
+$ spack <command2> <spec>
+...
+```
+
+### Error Message
+
+<!-- If Spack reported an error, provide the error message. If it did not report an error but the output appears incorrect, provide the incorrect output. If there was no error message and no output but the result is incorrect, describe how it does not match what you expect. -->
+```console
+$ spack --debug --stacktrace <command>
+```
+
+### Information on your system
+
+<!-- Please include the output of `spack debug report` -->
+
+<!-- If you have any relevant configuration detail (custom `packages.yaml` or `modules.yaml`, etc.) you can add that here as well. -->
+
+### Additional information
+
+<!-- These boxes can be checked by replacing [ ] with [x] or by clicking them after submitting the issue. -->
+- [ ] I have run `spack debug report` and reported the version of Spack/Python/Platform
+- [ ] I have searched the issues of this repo and believe this is not a duplicate
+- [ ] I have run the failing commands in debug mode and reported the output
+
+<!-- We encourage you to try, as much as possible, to reduce your problem to the minimal example that still reproduces the issue. That would help us a lot in fixing it quickly and effectively!
+
+If you want to ask a question about the tool (how to use it, what it can currently do, etc.), try the `#general` channel on our Slack first. We have a welcoming community and chances are you'll get your reply faster and without opening an issue.
+
+Other than that, thanks for taking the time to contribute to Spack! -->

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -1,58 +0,0 @@
-name: "\U0001F41E Bug report"
-description: Report a bug in the core of Spack (command not working as expected, etc.)
-labels: [bug, triage]
-body:
-  - type: textarea
-    id: reproduce
-    attributes:
-      label: Steps to reproduce
-      description: |
-        Explain, in a clear and concise way, the command you ran and the result you were trying to achieve.
-        Example: "I ran `spack find` to list all the installed packages and ..."
-      placeholder: |
-        ```console
-        $ spack <command1> <spec>
-        $ spack <command2> <spec>
-        ...
-        ```
-    validations:
-      required: true
-  - type: textarea
-    id: error
-    attributes:
-      label: Error message
-      description: |
-        If Spack reported an error, provide the error message. If it did not report an error but the output appears incorrect, provide the incorrect output. If there was no error message and no output but the result is incorrect, describe how it does not match what you expect.
-      placeholder: |
-        ```console
-        $ spack --debug --stacktrace <command>
-        ```
-  - type: textarea
-    id: information
-    attributes:
-      label: Information on your system
-      description: Please include the output of `spack debug report`
-    validations:
-      required: true
-  - type: markdown
-    attributes:
-      value: |
-        If you have any relevant configuration detail (custom `packages.yaml` or `modules.yaml`, etc.) you can add that here as well.
-  - type: checkboxes
-    id: checks
-    attributes:
-      label: General information
-      options:
-        - label: I have run `spack debug report` and reported the version of Spack/Python/Platform
-          required: true
-        - label: I have searched the issues of this repo and believe this is not a duplicate
-          required: true
-        - label: I have run the failing commands in debug mode and reported the output
-          required: true
-  - type: markdown
-    attributes:
-      value: |
-        We encourage you to try, as much as possible, to reduce your problem to the minimal example that still reproduces the issue. That would help us a lot in fixing it quickly and effectively!
-        If you want to ask a question about the tool (how to use it, what it can currently do, etc.), try the `#general` channel on [our Slack](https://slack.spack.io/) first. We have a welcoming community and chances are you'll get your reply faster and without opening an issue.
-        
-        Other than that, thanks for taking the time to contribute to Spack!

.github/ISSUE_TEMPLATE/build_error.md

@@ -0,0 +1,43 @@
+---
+name: "\U0001F4A5 Build error"
+about: Some package in Spack didn't build correctly
+title: "Installation issue: "
+labels: "build-error"
+---
+
+<!-- Thanks for taking the time to report this build failure. To proceed with the report please:
+
+1. Title the issue "Installation issue: <name-of-the-package>".
+2. Provide the information required below.
+
+We encourage you to try, as much as possible, to reduce your problem to the minimal example that still reproduces the issue. That would help us a lot in fixing it quickly and effectively! -->
+
+### Steps to reproduce the issue
+
+<!-- Fill in the exact spec you are trying to build and the relevant part of the error message -->
+```console
+$ spack install <spec>
+...
+```
+
+### Information on your system
+
+<!-- Please include the output of `spack debug report` -->
+
+<!-- If you have any relevant configuration detail (custom `packages.yaml` or `modules.yaml`, etc.) you can add that here as well. -->
+
+### Additional information
+
+<!-- Please upload the following files. They should be present in the stage directory of the failing build. Also upload any config.log or similar file if one exists. -->
+* [spack-build-out.txt]()
+* [spack-build-env.txt]()
+
+<!-- Some packages have maintainers who have volunteered to debug build failures. Run `spack maintainers <name-of-the-package>` and @mention them here if they exist. -->
+
+### General information
+
+<!-- These boxes can be checked by replacing [ ] with [x] or by clicking them after submitting the issue. -->
+- [ ] I have run `spack debug report` and reported the version of Spack/Python/Platform
+- [ ] I have run `spack maintainers <name-of-the-package>` and @mentioned any maintainers
+- [ ] I have uploaded the build log and environment files
+- [ ] I have searched the issues of this repo and believe this is not a duplicate

.github/ISSUE_TEMPLATE/build_error.yml

@@ -1,74 +0,0 @@
-name: "\U0001F4A5 Build error"
-description: Some package in Spack didn't build correctly
-title: "Installation issue: "
-labels: [build-error]
-body:
-  - type: markdown
-    attributes:
-      value: |
-        Thanks for taking the time to report this build failure. To proceed with the report please:
-        1. Title the issue `Installation issue: <name-of-the-package>`.
-        2. Provide the information required below.
-        
-        We encourage you to try, as much as possible, to reduce your problem to the minimal example that still reproduces the issue. That would help us a lot in fixing it quickly and effectively!
-  - type: textarea
-    id: reproduce
-    attributes:
-      label: Steps to reproduce the issue
-      description: |
-        Fill in the console output from the exact spec you are trying to build.
-      value: |
-        ```console
-        $ spack spec -I <spec>
-        ...
-        ```
-  - type: textarea
-    id: error
-    attributes:
-      label: Error message
-      description: |
-        Please post the error message from spack inside the `<details>` tag below:
-      value: |
-        <details><summary>Error message</summary><pre>
-        ...
-        </pre></details>
-    validations:
-      required: true
-  - type: textarea
-    id: information
-    attributes:
-      label: Information on your system
-      description: Please include the output of `spack debug report`.
-    validations:
-      required: true
-  - type: markdown
-    attributes:
-      value: |
-        If you have any relevant configuration detail (custom `packages.yaml` or `modules.yaml`, etc.) you can add that here as well.
-  - type: textarea
-    id: additional_information
-    attributes:
-      label: Additional information
-      description: |
-        Please upload the following files:
-        * **`spack-build-out.txt`**
-        * **`spack-build-env.txt`**
-        
-        They should be present in the stage directory of the failing build. Also upload any `config.log` or similar file if one exists.
-  - type: markdown
-    attributes:
-      value: |
-        Some packages have maintainers who have volunteered to debug build failures. Run `spack maintainers <name-of-the-package>` and **@mention** them here if they exist.
-  - type: checkboxes
-    id: checks
-    attributes:
-      label: General information
-      options:
-        - label: I have run `spack debug report` and reported the version of Spack/Python/Platform
-          required: true
-        - label: I have run `spack maintainers <name-of-the-package>` and **@mentioned** any maintainers
-          required: true
-        - label: I have uploaded the build log and environment files
-          required: true
-        - label: I have searched the issues of this repo and believe this is not a duplicate
-          required: true

.github/ISSUE_TEMPLATE/config.yml

@@ -1 +0,0 @@
-blank_issues_enabled: true

.github/ISSUE_TEMPLATE/feature_request.md

@@ -0,0 +1,33 @@
+---
+name: "\U0001F38A Feature request" 
+about: Suggest adding a feature that is not yet in Spack  
+labels: feature
+
+---
+
+<!--*Please add a concise summary of your suggestion here.*-->
+
+### Rationale
+
+<!--*Is your feature request related to a problem? Please describe it!*-->
+
+### Description
+
+<!--*Describe the solution you'd like and the alternatives you have considered.*-->
+
+
+### Additional information
+<!--*Add any other context about the feature request here.*-->
+
+
+### General information
+
+- [ ] I have run `spack --version` and reported the version of Spack
+- [ ] I have searched the issues of this repo and believe this is not a duplicate
+
+
+
+<!--If you want to ask a question about the tool (how to use it, what it can currently do, etc.), try the `#general` channel on our Slack first. We have a welcoming community and chances are you'll get your reply faster and without opening an issue.
+
+Other than that, thanks for taking the time to contribute to Spack!
+-->

.github/ISSUE_TEMPLATE/feature_request.yml

@@ -1,41 +0,0 @@
-name: "\U0001F38A Feature request" 
-description: Suggest adding a feature that is not yet in Spack
-labels: [feature]
-body:
-  - type: textarea
-    id: summary
-    attributes:
-      label: Summary
-      description: Please add a concise summary of your suggestion here.
-    validations:
-      required: true
-  - type: textarea
-    id: rationale
-    attributes:
-      label: Rationale
-      description: Is your feature request related to a problem? Please describe it!
-  - type: textarea
-    id: description
-    attributes:
-      label: Description
-      description: Describe the solution you'd like and the alternatives you have considered.
-  - type: textarea
-    id: additional_information
-    attributes:
-      label: Additional information
-      description: Add any other context about the feature request here.
-  - type: checkboxes
-    id: checks
-    attributes:
-      label: General information
-      options:
-        - label: I have run `spack --version` and reported the version of Spack
-          required: true
-        - label: I have searched the issues of this repo and believe this is not a duplicate
-          required: true
-  - type: markdown
-    attributes:
-      value: |
-        If you want to ask a question about the tool (how to use it, what it can currently do, etc.), try the `#general` channel on [our Slack](https://slack.spack.io/) first. We have a welcoming community and chances are you'll get your reply faster and without opening an issue.
-        
-        Other than that, thanks for taking the time to contribute to Spack!

.github/ISSUE_TEMPLATE/test_error.yml

@@ -1,62 +0,0 @@
-name: "\U0001F4A5 Tests error"
-description: Some package in Spack had stand-alone tests that didn't pass
-title: "Testing issue: "
-labels: [test-error]
-body:
-  - type: textarea
-    id: reproduce
-    attributes:
-      label: Steps to reproduce the failure(s) or link(s) to test output(s)
-      description: |
-        Fill in the test output from the exact spec that is having stand-alone test failures. Links to test outputs (e.g., CDash) can also be provided.
-      value: |
-        ```console
-        $ spack spec -I <spec>
-        ...
-        ```
-  - type: textarea
-    id: error
-    attributes:
-      label: Error message
-      description: |
-        Please post the error message from spack inside the `<details>` tag below:
-      value: |
-        <details><summary>Error message</summary><pre>
-        ...
-        </pre></details>
-    validations:
-      required: true
-  - type: textarea
-    id: information
-    attributes:
-      label: Information on your system or the test runner
-      description: Please include the output of `spack debug report` for your system.
-    validations:
-      required: true
-  - type: markdown
-    attributes:
-      value: |
-        If you have any relevant configuration detail (custom `packages.yaml` or `modules.yaml`, etc.) you can add that here as well.
-  - type: textarea
-    id: additional_information
-    attributes:
-      label: Additional information
-      description: |
-        Please upload test logs or any additional information about the problem.
-  - type: markdown
-    attributes:
-      value: |
-        Some packages have maintainers who have volunteered to debug build failures. Run `spack maintainers <name-of-the-package>` and **@mention** them here if they exist.
-  - type: checkboxes
-    id: checks
-    attributes:
-      label: General information
-      options:
-        - label: I have reported the version of Spack/Python/Platform/Runner
-          required: true
-        - label: I have run `spack maintainers <name-of-the-package>` and **@mentioned** any maintainers
-          required: true
-        - label: I have uploaded any available logs
-          required: true
-        - label: I have searched the issues of this repo and believe this is not a duplicate
-          required: true

.github/workflows/audit.yaml

@@ -1,44 +0,0 @@
-name: audit
-
-on:
-  workflow_call:
-    inputs:
-      with_coverage:
-        required: true
-        type: string
-      python_version:
-        required: true
-        type: string
-
-concurrency:
-  group: audit-${{inputs.python_version}}-${{github.ref}}-${{github.event.pull_request.number || github.run_number}}
-  cancel-in-progress: true
-
-jobs:
-  # Run audits on all the packages in the built-in repository
-  package-audits:
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@93ea575cb5d8a053eaa0ac8fa3b40d7e05a33cc8 # @v2
-    - uses: actions/setup-python@13ae5bb136fac2878aff31522b9efb785519f984 # @v2
-      with:
-        python-version: ${{inputs.python_version}}
-    - name: Install Python packages
-      run: |
-        pip install --upgrade pip six setuptools pytest codecov coverage[toml]
-    - name: Package audits (with coverage)
-      if: ${{ inputs.with_coverage == 'true' }}
-      run: |
-          . share/spack/setup-env.sh
-          coverage run $(which spack) audit packages
-          coverage combine
-          coverage xml
-    - name: Package audits (without coverage)
-      if: ${{ inputs.with_coverage == 'false' }}
-      run: |
-          . share/spack/setup-env.sh
-          $(which spack) audit packages
-    - uses: codecov/codecov-action@d9f34f8cd5cb3b3eb79b3e4b5dae3a16df499a70 # @v2.1.0
-      if: ${{ inputs.with_coverage == 'true' }}
-      with:
-        flags: unittests,linux,audits

.github/workflows/bootstrap-test.sh

@@ -1,7 +0,0 @@
-#!/bin/bash
-set -ex
-source share/spack/setup-env.sh
-$PYTHON bin/spack bootstrap disable spack-install
-$PYTHON bin/spack -d solve zlib
-tree $BOOTSTRAP/store
-exit 0

.github/workflows/bootstrap.yml

@@ -1,352 +0,0 @@
-name: Bootstrapping
-
-on:
-  # This Workflow can be triggered manually
-  workflow_dispatch:
-  workflow_call:
-  schedule:
-    # nightly at 2:16 AM
-    - cron: '16 2 * * *'
-
-concurrency:
-  group: bootstrap-${{github.ref}}-${{github.event.pull_request.number || github.run_number}}
-  cancel-in-progress: true
-
-jobs:
-  fedora-clingo-sources:
-    runs-on: ubuntu-latest
-    container: "fedora:latest"
-    steps:
-      - name: Install dependencies
-        run: |
-          dnf install -y \
-              bzip2 curl file gcc-c++ gcc gcc-gfortran git gnupg2 gzip \
-              make patch unzip which xz python3 python3-devel tree \
-              cmake bison bison-devel libstdc++-static
-      - name: Checkout
-        uses: actions/checkout@93ea575cb5d8a053eaa0ac8fa3b40d7e05a33cc8
-        with:
-          fetch-depth: 0
-      - name: Setup non-root user
-        run: |
-          # See [1] below
-          git config --global --add safe.directory /__w/spack/spack
-          useradd spack-test && mkdir -p ~spack-test
-          chown -R spack-test . ~spack-test
-      - name: Setup repo
-        shell: runuser -u spack-test -- bash {0}
-        run: |
-          git --version
-          . .github/workflows/setup_git.sh
-      - name: Bootstrap clingo
-        shell: runuser -u spack-test -- bash {0}
-        run: |
-          source share/spack/setup-env.sh
-          spack bootstrap disable github-actions-v0.4
-          spack bootstrap disable github-actions-v0.3
-          spack external find cmake bison
-          spack -d solve zlib
-          tree ~/.spack/bootstrap/store/
-
-  ubuntu-clingo-sources:
-    runs-on: ubuntu-latest
-    container: "ubuntu:latest"
-    steps:
-      - name: Install dependencies
-        env:
-          DEBIAN_FRONTEND: noninteractive
-        run: |
-          apt-get update -y && apt-get upgrade -y
-          apt-get install -y \
-              bzip2 curl file g++ gcc gfortran git gnupg2 gzip \
-              make patch unzip xz-utils python3 python3-dev tree \
-              cmake bison
-      - name: Checkout
-        uses: actions/checkout@93ea575cb5d8a053eaa0ac8fa3b40d7e05a33cc8
-        with:
-          fetch-depth: 0
-      - name: Setup non-root user
-        run: |
-          # See [1] below
-          git config --global --add safe.directory /__w/spack/spack
-          useradd spack-test && mkdir -p ~spack-test
-          chown -R spack-test . ~spack-test
-      - name: Setup repo
-        shell: runuser -u spack-test -- bash {0}
-        run: |
-          git --version
-          . .github/workflows/setup_git.sh
-      - name: Bootstrap clingo
-        shell: runuser -u spack-test -- bash {0}
-        run: |
-          source share/spack/setup-env.sh
-          spack bootstrap disable github-actions-v0.4
-          spack bootstrap disable github-actions-v0.3
-          spack external find cmake bison
-          spack -d solve zlib
-          tree ~/.spack/bootstrap/store/
-
-  ubuntu-clingo-binaries-and-patchelf:
-    runs-on: ubuntu-latest
-    container: "ubuntu:latest"
-    steps:
-      - name: Install dependencies
-        env:
-          DEBIAN_FRONTEND: noninteractive
-        run: |
-          apt-get update -y && apt-get upgrade -y
-          apt-get install -y \
-              bzip2 curl file g++ gcc gfortran git gnupg2 gzip \
-              make patch unzip xz-utils python3 python3-dev tree
-      - name: Checkout
-        uses: actions/checkout@93ea575cb5d8a053eaa0ac8fa3b40d7e05a33cc8
-        with:
-          fetch-depth: 0
-      - name: Setup non-root user
-        run: |
-          # See [1] below
-          git config --global --add safe.directory /__w/spack/spack
-          useradd spack-test && mkdir -p ~spack-test
-          chown -R spack-test . ~spack-test
-      - name: Setup repo
-        shell: runuser -u spack-test -- bash {0}
-        run: |
-          git --version
-          . .github/workflows/setup_git.sh
-      - name: Bootstrap clingo
-        shell: runuser -u spack-test -- bash {0}
-        run: |
-          source share/spack/setup-env.sh
-          spack -d solve zlib
-          tree ~/.spack/bootstrap/store/
-
-  opensuse-clingo-sources:
-    runs-on: ubuntu-latest
-    container: "opensuse/leap:latest"
-    steps:
-      - name: Install dependencies
-        run: |
-          # Harden CI by applying the workaround described here: https://www.suse.com/support/kb/doc/?id=000019505
-          zypper update -y || zypper update -y
-          zypper install -y \
-              bzip2 curl file gcc-c++ gcc gcc-fortran tar git gpg2 gzip \
-              make patch unzip which xz python3 python3-devel tree \
-              cmake bison
-      - name: Checkout
-        uses: actions/checkout@93ea575cb5d8a053eaa0ac8fa3b40d7e05a33cc8
-        with:
-          fetch-depth: 0
-      - name: Setup repo
-        run: |
-          # See [1] below
-          git config --global --add safe.directory /__w/spack/spack
-          git --version
-          . .github/workflows/setup_git.sh
-      - name: Bootstrap clingo
-        run: |
-          source share/spack/setup-env.sh
-          spack bootstrap disable github-actions-v0.4
-          spack bootstrap disable github-actions-v0.3
-          spack external find cmake bison
-          spack -d solve zlib
-          tree ~/.spack/bootstrap/store/
-
-  macos-clingo-sources:
-    runs-on: macos-latest
-    steps:
-      - name: Install dependencies
-        run: |
-          brew install cmake bison@2.7 tree
-      - name: Checkout
-        uses: actions/checkout@93ea575cb5d8a053eaa0ac8fa3b40d7e05a33cc8
-      - name: Bootstrap clingo
-        run: |
-          source share/spack/setup-env.sh
-          export PATH=/usr/local/opt/bison@2.7/bin:$PATH
-          spack bootstrap disable github-actions-v0.4
-          spack bootstrap disable github-actions-v0.3
-          spack external find --not-buildable cmake bison
-          spack -d solve zlib
-          tree ~/.spack/bootstrap/store/
-
-  macos-clingo-binaries:
-    runs-on: ${{ matrix.macos-version }}
-    strategy:
-      matrix:
-        macos-version: ['macos-11', 'macos-12']
-    steps:
-      - name: Install dependencies
-        run: |
-          brew install tree
-      - name: Checkout
-        uses: actions/checkout@93ea575cb5d8a053eaa0ac8fa3b40d7e05a33cc8
-      - name: Bootstrap clingo
-        run: |
-          set -ex
-          for ver in '3.6' '3.7' '3.8' '3.9' '3.10' ; do
-            not_found=1
-            ver_dir="$(find $RUNNER_TOOL_CACHE/Python -wholename "*/${ver}.*/*/bin" | grep . || true)"
-            echo "Testing $ver_dir"
-            if [[ -d "$ver_dir" ]] ; then
-              if $ver_dir/python --version ; then
-                export PYTHON="$ver_dir/python"
-                not_found=0
-                old_path="$PATH"
-                export PATH="$ver_dir:$PATH"
-                ./bin/spack-tmpconfig -b ./.github/workflows/bootstrap-test.sh
-                export PATH="$old_path"
-              fi
-            fi
-            # NOTE: test all pythons that exist, not all do on 12
-          done
-
-  ubuntu-clingo-binaries:
-    runs-on: ubuntu-20.04
-    steps:
-      - name: Checkout
-        uses: actions/checkout@93ea575cb5d8a053eaa0ac8fa3b40d7e05a33cc8
-        with:
-          fetch-depth: 0
-      - name: Setup repo
-        run: |
-          git --version
-          . .github/workflows/setup_git.sh
-      - name: Bootstrap clingo
-        run: |
-          set -ex
-          for ver in '2.7' '3.6' '3.7' '3.8' '3.9' '3.10' ; do
-            not_found=1
-            ver_dir="$(find $RUNNER_TOOL_CACHE/Python -wholename "*/${ver}.*/*/bin" | grep . || true)"
-            echo "Testing $ver_dir"
-            if [[ -d "$ver_dir" ]] ; then
-              if $ver_dir/python --version ; then
-                export PYTHON="$ver_dir/python"
-                not_found=0
-                old_path="$PATH"
-                export PATH="$ver_dir:$PATH"
-                ./bin/spack-tmpconfig -b ./.github/workflows/bootstrap-test.sh
-                export PATH="$old_path"
-              fi
-            fi
-            if (($not_found)) ; then
-              echo Required python version $ver not found in runner!
-              exit 1
-            fi
-          done
-
-  ubuntu-gnupg-binaries:
-    runs-on: ubuntu-latest
-    container: "ubuntu:latest"
-    steps:
-      - name: Install dependencies
-        env:
-          DEBIAN_FRONTEND: noninteractive
-        run: |
-          apt-get update -y && apt-get upgrade -y
-          apt-get install -y \
-              bzip2 curl file g++ gcc patchelf gfortran git gzip \
-              make patch unzip xz-utils python3 python3-dev tree
-      - name: Checkout
-        uses: actions/checkout@93ea575cb5d8a053eaa0ac8fa3b40d7e05a33cc8
-        with:
-          fetch-depth: 0
-      - name: Setup non-root user
-        run: |
-          # See [1] below
-          git config --global --add safe.directory /__w/spack/spack
-          useradd spack-test && mkdir -p ~spack-test
-          chown -R spack-test . ~spack-test
-      - name: Setup repo
-        shell: runuser -u spack-test -- bash {0}
-        run: |
-          git --version
-          . .github/workflows/setup_git.sh
-      - name: Bootstrap GnuPG
-        shell: runuser -u spack-test -- bash {0}
-        run: |
-          source share/spack/setup-env.sh
-          spack bootstrap disable spack-install
-          spack -d gpg list
-          tree ~/.spack/bootstrap/store/
-
-  ubuntu-gnupg-sources:
-    runs-on: ubuntu-latest
-    container: "ubuntu:latest"
-    steps:
-      - name: Install dependencies
-        env:
-          DEBIAN_FRONTEND: noninteractive
-        run: |
-          apt-get update -y && apt-get upgrade -y
-          apt-get install -y \
-              bzip2 curl file g++ gcc patchelf gfortran git gzip \
-              make patch unzip xz-utils python3 python3-dev tree \
-              gawk
-      - name: Checkout
-        uses: actions/checkout@93ea575cb5d8a053eaa0ac8fa3b40d7e05a33cc8
-        with:
-          fetch-depth: 0
-      - name: Setup non-root user
-        run: |
-          # See [1] below
-          git config --global --add safe.directory /__w/spack/spack
-          useradd spack-test && mkdir -p ~spack-test
-          chown -R spack-test . ~spack-test
-      - name: Setup repo
-        shell: runuser -u spack-test -- bash {0}
-        run: |
-          git --version
-          . .github/workflows/setup_git.sh
-      - name: Bootstrap GnuPG
-        shell: runuser -u spack-test -- bash {0}
-        run: |
-          source share/spack/setup-env.sh
-          spack solve zlib
-          spack bootstrap disable github-actions-v0.4
-          spack bootstrap disable github-actions-v0.3
-          spack -d gpg list
-          tree ~/.spack/bootstrap/store/
-
-  macos-gnupg-binaries:
-    runs-on: macos-latest
-    steps:
-      - name: Install dependencies
-        run: |
-          brew install tree
-          # Remove GnuPG since we want to bootstrap it
-          sudo rm -rf /usr/local/bin/gpg
-      - name: Checkout
-        uses: actions/checkout@93ea575cb5d8a053eaa0ac8fa3b40d7e05a33cc8
-      - name: Bootstrap GnuPG
-        run: |
-          source share/spack/setup-env.sh
-          spack bootstrap disable spack-install
-          spack -d gpg list
-          tree ~/.spack/bootstrap/store/
-
-  macos-gnupg-sources:
-    runs-on: macos-latest
-    steps:
-      - name: Install dependencies
-        run: |
-          brew install gawk tree
-          # Remove GnuPG since we want to bootstrap it
-          sudo rm -rf /usr/local/bin/gpg
-      - name: Checkout
-        uses: actions/checkout@93ea575cb5d8a053eaa0ac8fa3b40d7e05a33cc8
-      - name: Bootstrap GnuPG
-        run: |
-          source share/spack/setup-env.sh
-          spack solve zlib
-          spack bootstrap disable github-actions-v0.4
-          spack bootstrap disable github-actions-v0.3
-          spack -d gpg list
-          tree ~/.spack/bootstrap/store/
-
-
-# [1] Distros that have patched git to resolve CVE-2022-24765 (e.g. Ubuntu patching v2.25.1)
-#     introduce breaking behaviorso we have to set `safe.directory` in gitconfig ourselves.
-#     See:
-#     - https://github.blog/2022-04-12-git-security-vulnerability-announced/
-#     - https://github.com/actions/checkout/issues/760
-#     - http://changelogs.ubuntu.com/changelogs/pool/main/g/git/git_2.25.1-1ubuntu3.3/changelog

.github/workflows/build-containers.yml

@@ -1,120 +0,0 @@
-name: Containers
-
-on:
-  # This Workflow can be triggered manually
-  workflow_dispatch:
-  # Build new Spack develop containers nightly.
-  schedule:
-    - cron: '34 0 * * *'
-  # Run on pull requests that modify this file
-  pull_request:
-    branches:
-      - develop
-    paths:
-      - '.github/workflows/build-containers.yml'
-      - 'share/spack/docker/*'
-      - 'share/spack/templates/container/*'
-      - 'lib/spack/spack/container/*'
-  # Let's also build & tag Spack containers on releases.
-  release:
-    types: [published]
-
-concurrency:
-  group: build_containers-${{github.ref}}-${{github.event.pull_request.number || github.run_number}}
-  cancel-in-progress: true
-
-jobs:
-  deploy-images:
-    runs-on: ubuntu-latest
-    permissions:
-      packages: write
-    strategy:
-      # Even if one container fails to build we still want the others
-      # to continue their builds.
-      fail-fast: false
-      # A matrix of Dockerfile paths, associated tags, and which architectures
-      # they support.
-      matrix:
-        # Meaning of the various items in the matrix list
-        # 0: Container name (e.g. ubuntu-bionic)
-        # 1: Platforms to build for
-        # 2: Base image (e.g. ubuntu:18.04)
-        dockerfile: [[amazon-linux, 'linux/amd64,linux/arm64', 'amazonlinux:2'],
-                     [centos7, 'linux/amd64,linux/arm64,linux/ppc64le', 'centos:7'],
-                     [centos-stream, 'linux/amd64,linux/arm64,linux/ppc64le', 'centos:stream'],
-                     [leap15, 'linux/amd64,linux/arm64,linux/ppc64le', 'opensuse/leap:15'],
-                     [ubuntu-bionic, 'linux/amd64,linux/arm64,linux/ppc64le', 'ubuntu:18.04'],
-                     [ubuntu-focal, 'linux/amd64,linux/arm64,linux/ppc64le', 'ubuntu:20.04'],
-                     [ubuntu-jammy, 'linux/amd64,linux/arm64,linux/ppc64le', 'ubuntu:22.04']]
-    name: Build ${{ matrix.dockerfile[0] }}
-    if: github.repository == 'spack/spack'
-    steps:
-      - name: Checkout
-        uses: actions/checkout@93ea575cb5d8a053eaa0ac8fa3b40d7e05a33cc8 # @v2
-
-      - name: Set Container Tag Normal (Nightly)
-        run: |
-          container="${{ matrix.dockerfile[0] }}:latest"
-          echo "container=${container}" >> $GITHUB_ENV
-          echo "versioned=${container}" >> $GITHUB_ENV
-
-        # On a new release create a container with the same tag as the release.
-      - name: Set Container Tag on Release
-        if: github.event_name == 'release'
-        run: |
-          versioned="${{matrix.dockerfile[0]}}:${GITHUB_REF##*/}"
-          echo "versioned=${versioned}" >> $GITHUB_ENV
-
-      - name: Generate the Dockerfile
-        env:
-          SPACK_YAML_OS: "${{ matrix.dockerfile[2] }}"
-        run: |
-          .github/workflows/generate_spack_yaml_containerize.sh
-          . share/spack/setup-env.sh
-          mkdir -p dockerfiles/${{ matrix.dockerfile[0] }}
-          spack containerize --last-stage=bootstrap | tee dockerfiles/${{ matrix.dockerfile[0] }}/Dockerfile
-          printf "Preparing to build ${{ env.container }} from dockerfiles/${{ matrix.dockerfile[0] }}/Dockerfile"
-          if [ ! -f "dockerfiles/${{ matrix.dockerfile[0] }}/Dockerfile" ]; then
-              printf "dockerfiles/${{ matrix.dockerfile[0] }}/Dockerfile does not exist"
-              exit 1;
-          fi
-
-      - name: Upload Dockerfile
-        uses: actions/upload-artifact@83fd05a356d7e2593de66fc9913b3002723633cb
-        with:
-          name: dockerfiles
-          path: dockerfiles
-
-      - name: Set up QEMU
-        uses: docker/setup-qemu-action@e81a89b1732b9c48d79cd809d8d81d79c4647a18 # @v1
-
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@8c0edbc76e98fa90f69d9a2c020dcb50019dc325 # @v1
-
-      - name: Log in to GitHub Container Registry
-        uses: docker/login-action@f4ef78c080cd8ba55a85445d5b36e214a81df20a # @v1
-        with:
-          registry: ghcr.io
-          username: ${{ github.actor }}
-          password: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Log in to DockerHub
-        if: github.event_name != 'pull_request'
-        uses: docker/login-action@f4ef78c080cd8ba55a85445d5b36e214a81df20a # @v1
-        with:
-          username: ${{ secrets.DOCKERHUB_USERNAME }}
-          password: ${{ secrets.DOCKERHUB_TOKEN }}
-
-      - name: Build & Deploy ${{ matrix.dockerfile[0] }}
-        uses: docker/build-push-action@c56af957549030174b10d6867f20e78cfd7debc5 # @v2
-        with:
-          context: dockerfiles/${{ matrix.dockerfile[0] }}
-          platforms: ${{ matrix.dockerfile[1] }}
-          push: ${{ github.event_name != 'pull_request' }}
-          cache-from: type=gha
-          cache-to: type=gha,mode=max
-          tags: |
-            spack/${{ env.container }}
-            spack/${{ env.versioned }}
-            ghcr.io/spack/${{ env.container }}
-            ghcr.io/spack/${{ env.versioned }}

.github/workflows/ci.yaml

@@ -1,92 +0,0 @@
-name: ci
-
-on:
-  push:
-    branches:
-      - develop
-      - releases/**
-  pull_request:
-    branches:
-      - develop
-      - releases/**
-
-concurrency:
-  group: ci-${{github.ref}}-${{github.event.pull_request.number || github.run_number}}
-  cancel-in-progress: true
-
-jobs:
-  prechecks:
-    needs: [ changes ]
-    uses: ./.github/workflows/valid-style.yml
-    with:
-      with_coverage: ${{ needs.changes.outputs.core }}
-  audit-ancient-python:
-    uses: ./.github/workflows/audit.yaml
-    needs: [ changes ]
-    with:
-      with_coverage: ${{ needs.changes.outputs.core }}
-      python_version: 2.7
-  all-prechecks:
-    needs: [ prechecks ]
-    runs-on: ubuntu-latest
-    steps:
-    - name: Success
-      run: "true"
-  # Check which files have been updated by the PR
-  changes:
-    runs-on: ubuntu-latest
-      # Set job outputs to values from filter step
-    outputs:
-      bootstrap: ${{ steps.filter.outputs.bootstrap }}
-      core: ${{ steps.filter.outputs.core }}
-      packages: ${{ steps.filter.outputs.packages }}
-    steps:
-      - uses: actions/checkout@93ea575cb5d8a053eaa0ac8fa3b40d7e05a33cc8 # @v2
-        if: ${{ github.event_name == 'push' }}
-        with:
-          fetch-depth: 0
-            # For pull requests it's not necessary to checkout the code
-      - uses: dorny/paths-filter@4512585405083f25c027a35db413c2b3b9006d50
-        id: filter
-        with:
-          # See https://github.com/dorny/paths-filter/issues/56 for the syntax used below
-          # Don't run if we only modified packages in the
-          # built-in repository or documentation
-          filters: |
-            bootstrap:
-            - 'var/spack/repos/builtin/packages/clingo-bootstrap/**'
-            - 'var/spack/repos/builtin/packages/clingo/**'
-            - 'var/spack/repos/builtin/packages/python/**'
-            - 'var/spack/repos/builtin/packages/re2c/**'
-            - 'lib/spack/**'
-            - 'share/spack/**'
-            - '.github/workflows/bootstrap.yml'
-            - '.github/workflows/ci.yaml'
-            core:
-            - './!(var/**)/**'
-            packages:
-            - 'var/**'
-      # Some links for easier reference:
-      #
-      # "github" context: https://docs.github.com/en/actions/reference/context-and-expression-syntax-for-github-actions#github-context
-      # job outputs: https://docs.github.com/en/actions/reference/workflow-syntax-for-github-actions#jobsjob_idoutputs
-      # setting environment variables from earlier steps: https://docs.github.com/en/actions/reference/workflow-commands-for-github-actions#setting-an-environment-variable
-      #
-  bootstrap:
-    if: ${{ github.repository == 'spack/spack' && needs.changes.outputs.bootstrap == 'true' }}
-    needs: [ prechecks, changes ]
-    uses: ./.github/workflows/bootstrap.yml
-  unit-tests:
-    if: ${{ github.repository == 'spack/spack' && needs.changes.outputs.core == 'true' }}
-    needs: [ prechecks, changes ]
-    uses: ./.github/workflows/unit_tests.yaml
-  windows:
-    if: ${{ github.repository == 'spack/spack' && needs.changes.outputs.core == 'true' }}
-    needs: [ prechecks ]
-    uses: ./.github/workflows/windows_python.yml
-  all:
-    needs: [ windows, unit-tests, bootstrap, audit-ancient-python ]
-    runs-on: ubuntu-latest
-    steps:
-    - name: Success
-      run: "true"

.github/workflows/execute_installer.ps1

@@ -1,7 +0,0 @@
-$ proc = Start-Process  ${{ env.spack_installer }}\spack.exe "/install /quiet" -Passthru
-$handle = $proc.Handle # cache proc.Handle
-$proc.WaitForExit();
-
-if ($proc.ExitCode -ne 0) {
-    Write-Warning "$_ exited with status code $($proc.ExitCode)"
-}

.github/workflows/generate_spack_yaml_containerize.sh

@@ -1,9 +0,0 @@
-#!/bin/bash
-    (echo "spack:" \
-&&   echo "  specs: []" \
-&&   echo "  container:" \
-&&   echo "    format: docker" \
-&&   echo "    images:" \
-&&   echo "      os: \"${SPACK_YAML_OS}\"" \
-&&   echo "      spack:" \
-&&   echo "        ref: ${GITHUB_REF}") > spack.yaml

.github/workflows/install_spack.sh

@@ -2,7 +2,19 @@
 . share/spack/setup-env.sh
 echo -e "config:\n  build_jobs: 2" > etc/spack/config.yaml
 spack config add "packages:all:target:[x86_64]"
-spack compiler find
+# TODO: remove this explicit setting once apple-clang detection is fixed
+cat <<EOF > etc/spack/compilers.yaml
+compilers:
+- compiler:
+    spec: apple-clang@11.0.3
+    paths:
+      cc: /usr/bin/clang
+      cxx: /usr/bin/clang++
+      f77: /usr/local/bin/gfortran-9
+      fc: /usr/local/bin/gfortran-9
+    modules: []
+    operating_system: catalina
+    target: x86_64
+EOF
 spack compiler info apple-clang
 spack debug report
-spack solve zlib

.github/workflows/linux_build_tests.yaml

@@ -0,0 +1,77 @@
+name: linux builds
+
+on:
+  push:
+    branches:
+    - develop
+    - releases/**
+    paths-ignore:
+      # Don't run if we only modified packages in the built-in repository
+      - 'var/spack/repos/builtin/**'
+      - '!var/spack/repos/builtin/packages/lz4/**'
+      - '!var/spack/repos/builtin/packages/mpich/**'
+      - '!var/spack/repos/builtin/packages/tut/**'
+      - '!var/spack/repos/builtin/packages/py-setuptools/**'
+      - '!var/spack/repos/builtin/packages/openjpeg/**'
+      - '!var/spack/repos/builtin/packages/r-rcpp/**'
+      - '!var/spack/repos/builtin/packages/ruby-rake/**'
+      # Don't run if we only modified documentation
+      - 'lib/spack/docs/**'
+  pull_request:
+    branches:
+    - develop
+    - releases/**
+    paths-ignore:
+      # Don't run if we only modified packages in the built-in repository
+      - 'var/spack/repos/builtin/**'
+      - '!var/spack/repos/builtin/packages/lz4/**'
+      - '!var/spack/repos/builtin/packages/mpich/**'
+      - '!var/spack/repos/builtin/packages/tut/**'
+      - '!var/spack/repos/builtin/packages/py-setuptools/**'
+      - '!var/spack/repos/builtin/packages/openjpeg/**'
+      - '!var/spack/repos/builtin/packages/r-rcpp/**'
+      - '!var/spack/repos/builtin/packages/ruby-rake/**'
+      # Don't run if we only modified documentation
+      - 'lib/spack/docs/**'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    strategy:
+      matrix:
+        package:
+        - lz4  # MakefilePackage
+        - mpich~fortran  # AutotoolsPackage
+        - 'tut%gcc@:10.99.99'  # WafPackage
+        - py-setuptools  # PythonPackage
+        - openjpeg  # CMakePackage
+        - r-rcpp  # RPackage
+        - ruby-rake  # RubyPackage
+    steps:
+    - uses: actions/checkout@v2
+    - uses: actions/cache@v2.1.6
+      with:
+        path: ~/.ccache
+        key: ccache-build-${{ matrix.package }}
+        restore-keys: |
+          ccache-build-${{ matrix.package }}
+    - uses: actions/setup-python@v2
+      with:
+        python-version: 3.9
+    - name: Install System Packages
+      run: |
+        sudo apt-get update
+        sudo apt-get -yqq install ccache gfortran perl perl-base r-base r-base-core r-base-dev ruby findutils openssl libssl-dev libpciaccess-dev
+        R --version
+        perl --version
+        ruby --version
+    - name: Copy Configuration
+      run: |
+        ccache -M 300M && ccache -z
+        # Set up external deps for build tests, b/c they take too long to compile
+        cp share/spack/qa/configuration/*.yaml etc/spack/
+    - name: Run the build test
+      run: |
+        . share/spack/setup-env.sh
+        SPEC=${{ matrix.package }} share/spack/qa/run-build-tests
+        ccache -s

.github/workflows/macos_python.yml

@@ -0,0 +1,78 @@
+# These are nightly package tests for macOS
+# focus areas:
+# - initial user experience
+# - scientific python stack
+name: macOS builds nightly
+
+on:
+  schedule:
+    # nightly at 1 AM
+    - cron: '0 1 * * *'
+  pull_request:
+    branches:
+    - develop
+    paths:
+      # Run if we modify this yaml file
+      - '.github/workflows/macos_python.yml'
+      # TODO: run if we touch any of the recipes involved in this
+
+# GitHub Action Limits
+# https://help.github.com/en/actions/reference/workflow-syntax-for-github-actions
+
+jobs:
+  install_gcc:
+    name: gcc with clang
+    runs-on: macos-latest
+    steps:
+    - uses: actions/checkout@v2
+    - uses: actions/setup-python@v2
+      with:
+        python-version: 3.9
+    - name: spack install
+      run: |
+        . .github/workflows/install_spack.sh
+        # 9.2.0 is the latest version on which we apply homebrew patch
+        spack install -v --fail-fast gcc@9.2.0 %apple-clang
+
+  install_jupyter_clang:
+    name: jupyter
+    runs-on: macos-latest
+    timeout-minutes: 700
+    steps:
+    - uses: actions/checkout@v2
+    - uses: actions/setup-python@v2
+      with:
+        python-version: 3.9
+    - name: spack install
+      run: |
+        . .github/workflows/install_spack.sh
+        spack install -v --fail-fast py-jupyterlab %apple-clang
+
+  install_scipy_clang:
+    name: scipy, mpl, pd
+    runs-on: macos-latest
+    steps:
+    - uses: actions/checkout@v2
+    - uses: actions/setup-python@v2
+      with:
+        python-version: 3.9
+    - name: spack install
+      run: |
+        . .github/workflows/install_spack.sh
+        spack install -v --fail-fast py-scipy %apple-clang
+        spack install -v --fail-fast py-matplotlib %apple-clang
+        spack install -v --fail-fast py-pandas %apple-clang
+
+  install_mpi4py_clang:
+    name: mpi4py, petsc4py
+    runs-on: macos-latest
+    steps:
+    - uses: actions/checkout@v2
+    - uses: actions/setup-python@v2
+      with:
+        python-version: 3.9
+    - name: spack install
+      run: |
+        . .github/workflows/install_spack.sh
+        spack install -v --fail-fast py-mpi4py %apple-clang
+        spack install -v --fail-fast py-petsc4py %apple-clang

.github/workflows/setup_git.ps1

@@ -1,16 +0,0 @@
-# (c) 2021 Lawrence Livermore National Laboratory
-
-Set-Location spack
-
-git config --global user.email "spack@example.com"
-git config --global user.name "Test User"
-git config --global core.longpaths true
-
-# See https://github.com/git/git/security/advisories/GHSA-3wp6-j8xr-qw85 (CVE-2022-39253)
-# This is needed to let some fixture in our unit-test suite run
-git config --global protocol.file.allow always
-
-if ($(git branch --show-current) -ne "develop")
-{
-    git branch develop origin/develop
-}

.github/workflows/setup_git.sh

@@ -1,12 +1,9 @@
-#!/bin/bash -e
+#!/usr/bin/env sh
 git config --global user.email "spack@example.com"
 git config --global user.name "Test User"
-
-# See https://github.com/git/git/security/advisories/GHSA-3wp6-j8xr-qw85 (CVE-2022-39253)
-# This is needed to let some fixture in our unit-test suite run
-git config --global protocol.file.allow always
-
-# create a local pr base branch
-if [[ -n $GITHUB_BASE_REF ]]; then
-    git fetch origin "${GITHUB_BASE_REF}:${GITHUB_BASE_REF}"
+# With fetch-depth: 0 we have a remote develop
+# but not a local branch. Don't do this on develop
+if [ "$(git branch --show-current)" != "develop" ]
+then
+  git branch develop origin/develop
 fi

.github/workflows/system_shortcut_check.ps1

@@ -1,4 +0,0 @@
-param ($systemFolder, $shortcut)
-
-$start = [System.Environment]::GetFolderPath("$systemFolder")
-Invoke-Item "$start\Programs\Spack\$shortcut"

.github/workflows/unit_tests.yaml

@@ -1,49 +1,128 @@
-name: unit tests
+name: linux tests
 
 on:
-  workflow_dispatch:
-  workflow_call:
-
-concurrency:
-  group: unit_tests-${{github.ref}}-${{github.event.pull_request.number || github.run_number}}
-  cancel-in-progress: true
-
+  push:
+    branches:
+      - develop
+      - releases/**
+  pull_request:
+    branches:
+      - develop
+      - releases/**
 jobs:
+  # Validate that the code can be run on all the Python versions
+  # supported by Spack
+  validate:
+    runs-on: ubuntu-latest
+    steps:
+    - uses: actions/checkout@v2
+    - uses: actions/setup-python@v2
+      with:
+        python-version: 3.9
+    - name: Install Python Packages
+      run: |
+        pip install --upgrade pip
+        pip install --upgrade vermin
+    - name: vermin (Spack's Core)
+      run: vermin --backport argparse --violations --backport typing -t=2.6- -t=3.5- -vvv lib/spack/spack/ lib/spack/llnl/ bin/
+    - name: vermin (Repositories)
+      run: vermin --backport argparse --violations --backport typing -t=2.6- -t=3.5- -vvv var/spack/repos
+  # Run style checks on the files that have been changed
+  style:
+    runs-on: ubuntu-latest
+    steps:
+    - uses: actions/checkout@v2
+      with:
+        fetch-depth: 0
+    - uses: actions/setup-python@v2
+      with:
+        python-version: 3.9
+    - name: Install Python packages
+      run: |
+        pip install --upgrade pip six setuptools flake8 isort>=4.3.5 mypy>=0.800 black types-six
+    - name: Setup git configuration
+      run: |
+        # Need this for the git tests to succeed.
+        git --version
+        . .github/workflows/setup_git.sh
+    - name: Run style tests
+      run: |
+          share/spack/qa/run-style-tests
+  # Build the documentation
+  documentation:
+    runs-on: ubuntu-latest
+    steps:
+    - uses: actions/checkout@v2
+    - uses: actions/setup-python@v2
+      with:
+        python-version: 3.9
+    - name: Install System packages
+      run: |
+        sudo apt-get -y update
+        sudo apt-get install -y coreutils ninja-build graphviz
+    - name: Install Python packages
+      run: |
+        pip install --upgrade pip six setuptools
+        pip install --upgrade -r lib/spack/docs/requirements.txt
+    - name: Build documentation
+      run: |
+          share/spack/qa/run-doc-tests
+
+  # Check which files have been updated by the PR
+  changes:
+    runs-on: ubuntu-latest
+    # Set job outputs to values from filter step
+    outputs:
+      core: ${{ steps.filter.outputs.core }}
+      packages: ${{ steps.filter.outputs.packages }}
+      with_coverage: ${{ steps.coverage.outputs.with_coverage }}
+    steps:
+    - uses: actions/checkout@v2
+      if: ${{ github.event_name == 'push' }}
+      with:
+        fetch-depth: 0
+    # For pull requests it's not necessary to checkout the code
+    - uses: dorny/paths-filter@v2
+      id: filter
+      with:
+        # See https://github.com/dorny/paths-filter/issues/56 for the syntax used below
+        filters: |
+          core:
+          - './!(var/**)/**'
+          packages:
+          - 'var/**'
+    # Some links for easier reference:
+    #
+    # "github" context: https://docs.github.com/en/actions/reference/context-and-expression-syntax-for-github-actions#github-context
+    # job outputs: https://docs.github.com/en/actions/reference/workflow-syntax-for-github-actions#jobsjob_idoutputs
+    # setting environment variables from earlier steps: https://docs.github.com/en/actions/reference/workflow-commands-for-github-actions#setting-an-environment-variable
+    #
+    - id: coverage
+      # Run the subsequent jobs with coverage if core has been modified,
+      # regardless of whether this is a pull request or a push to a branch
+      run: |
+        echo Core changes: ${{ steps.filter.outputs.core }}
+        echo Event name: ${{ github.event_name }}
+        if [ "${{ steps.filter.outputs.core }}" == "true" ]
+        then
+          echo "::set-output name=with_coverage::true"
+        else
+          echo "::set-output name=with_coverage::false"
+        fi
+
   # Run unit tests with different configurations on linux
-  ubuntu:
+  unittests:
+    needs: [ validate, style, documentation, changes ]
     runs-on: ubuntu-latest
     strategy:
       matrix:
-        python-version: ['2.7', '3.6', '3.7', '3.8', '3.9', '3.10', '3.11']
-        concretizer: ['clingo']
-        on_develop:
-        - ${{ github.ref == 'refs/heads/develop' }}
-        include:
-        - python-version: 2.7
-          concretizer: original
-          on_develop: ${{ github.ref == 'refs/heads/develop' }}
-        - python-version: '3.11'
-          concretizer: original
-          on_develop: ${{ github.ref == 'refs/heads/develop' }}
-        exclude:
-        - python-version: '3.7'
-          concretizer: 'clingo'
-          on_develop: false
-        - python-version: '3.8'
-          concretizer: 'clingo'
-          on_develop: false
-        - python-version: '3.9'
-          concretizer: 'clingo'
-          on_develop: false
-        - python-version: '3.10'
-          concretizer: 'clingo'
-          on_develop: false
-
+        python-version: [2.7, 3.5, 3.6, 3.7, 3.8, 3.9]
+        concretizer: ['original', 'clingo']
     steps:
-    - uses: actions/checkout@93ea575cb5d8a053eaa0ac8fa3b40d7e05a33cc8 # @v2
+    - uses: actions/checkout@v2
       with:
         fetch-depth: 0
-    - uses: actions/setup-python@13ae5bb136fac2878aff31522b9efb785519f984 # @v2
+    - uses: actions/setup-python@v2
       with:
         python-version: ${{ matrix.python-version }}
     - name: Install System packages
@@ -51,86 +130,148 @@ jobs:
           sudo apt-get -y update
           # Needed for unit tests
           sudo apt-get -y install \
-              coreutils cvs gfortran graphviz gnupg2 mercurial ninja-build \
-              patchelf cmake bison libbison-dev kcov
+              coreutils cvs gfortran graphviz gnupg2 mercurial  ninja-build \
+              patchelf
+          # Needed for kcov
+          sudo apt-get -y install cmake binutils-dev libcurl4-openssl-dev
+          sudo apt-get -y install zlib1g-dev libdw-dev libiberty-dev
     - name: Install Python packages
       run: |
-          pip install --upgrade pip six setuptools pytest codecov[toml] pytest-xdist 
-          # Install pytest-cov only on recent Python, to avoid stalling on Python 2.7 due
-          # to bugs on an unmaintained version of the package when used with xdist.
-          if [[ ${{ matrix.python-version }} != "2.7" ]]; then
-            pip install --upgrade pytest-cov
-          fi
-          # ensure style checks are not skipped in unit tests for python >= 3.6
-          # note that true/false (i.e., 1/0) are opposite in conditions in python and bash
-          if python -c 'import sys; sys.exit(not sys.version_info >= (3, 6))'; then
-              pip install --upgrade flake8 "isort>=4.3.5" "mypy>=0.900" "click==8.0.4" "black<=21.12b0"
-          fi
-    - name: Pin pathlib for Python 2.7
-      if: ${{ matrix.python-version == 2.7 }}
-      run: |
-          pip install -U pathlib2==2.3.6 toml
+          pip install --upgrade pip six setuptools codecov coverage
     - name: Setup git configuration
       run: |
           # Need this for the git tests to succeed.
           git --version
           . .github/workflows/setup_git.sh
-    - name: Bootstrap clingo
+    - name: Install kcov for bash script coverage
+      if: ${{ needs.changes.outputs.with_coverage == 'true' }}
+      env:
+          KCOV_VERSION: 34
+      run: |
+          KCOV_ROOT=$(mktemp -d)
+          wget --output-document=${KCOV_ROOT}/${KCOV_VERSION}.tar.gz https://github.com/SimonKagstrom/kcov/archive/v${KCOV_VERSION}.tar.gz
+          tar -C ${KCOV_ROOT} -xzvf ${KCOV_ROOT}/${KCOV_VERSION}.tar.gz
+          mkdir -p ${KCOV_ROOT}/build
+          cd ${KCOV_ROOT}/build && cmake -Wno-dev ${KCOV_ROOT}/kcov-${KCOV_VERSION} && cd -
+          make -C ${KCOV_ROOT}/build && sudo  make -C ${KCOV_ROOT}/build install
+    - name: Bootstrap clingo from sources
       if: ${{ matrix.concretizer == 'clingo' }}
       env:
           SPACK_PYTHON: python
       run: |
           . share/spack/setup-env.sh
-          spack bootstrap disable spack-install
+          spack external find --not-buildable cmake bison
           spack -v solve zlib
-    - name: Run unit tests
+    - name: Run unit tests (full suite with coverage)
+      if: ${{ needs.changes.outputs.with_coverage == 'true' }}
       env:
           SPACK_PYTHON: python
-          SPACK_TEST_SOLVER: ${{ matrix.concretizer }}
-          SPACK_TEST_PARALLEL: 2
           COVERAGE: true
-          UNIT_TEST_COVERAGE: ${{ (matrix.python-version == '3.11') }}
+          SPACK_TEST_SOLVER: ${{ matrix.concretizer }}
       run: |
           share/spack/qa/run-unit-tests
-    - uses: codecov/codecov-action@d9f34f8cd5cb3b3eb79b3e4b5dae3a16df499a70
+          coverage combine
+          coverage xml
+    - name: Run unit tests (reduced suite without coverage)
+      if: ${{ needs.changes.outputs.with_coverage == 'false' }}
+      env:
+          SPACK_PYTHON: python
+          ONLY_PACKAGES: true
+          SPACK_TEST_SOLVER: ${{ matrix.concretizer }}
+      run: |
+          share/spack/qa/run-unit-tests
+    - uses: codecov/codecov-action@v1
+      if: ${{ needs.changes.outputs.with_coverage == 'true' }}
       with:
         flags: unittests,linux,${{ matrix.concretizer }}
   # Test shell integration
   shell:
+    needs: [ validate, style, documentation, changes ]
     runs-on: ubuntu-latest
     steps:
-    - uses: actions/checkout@93ea575cb5d8a053eaa0ac8fa3b40d7e05a33cc8 # @v2
+    - uses: actions/checkout@v2
       with:
         fetch-depth: 0
-    - uses: actions/setup-python@13ae5bb136fac2878aff31522b9efb785519f984 # @v2
+    - uses: actions/setup-python@v2
       with:
-        python-version: '3.11'
+        python-version: 3.9
     - name: Install System packages
       run: |
           sudo apt-get -y update
           # Needed for shell tests
-          sudo apt-get install -y coreutils kcov csh zsh tcsh fish dash bash
+          sudo apt-get install -y coreutils csh zsh tcsh fish dash bash
+          # Needed for kcov
+          sudo apt-get -y install cmake binutils-dev libcurl4-openssl-dev
+          sudo apt-get -y install zlib1g-dev libdw-dev libiberty-dev
     - name: Install Python packages
       run: |
-          pip install --upgrade pip six setuptools pytest codecov coverage[toml] pytest-xdist
+          pip install --upgrade pip six setuptools codecov coverage
     - name: Setup git configuration
       run: |
           # Need this for the git tests to succeed.
           git --version
           . .github/workflows/setup_git.sh
-    - name: Run shell tests
+    - name: Install kcov for bash script coverage
+      if: ${{ needs.changes.outputs.with_coverage == 'true' }}
+      env:
+          KCOV_VERSION: 38
+      run: |
+          KCOV_ROOT=$(mktemp -d)
+          wget --output-document=${KCOV_ROOT}/${KCOV_VERSION}.tar.gz https://github.com/SimonKagstrom/kcov/archive/v${KCOV_VERSION}.tar.gz
+          tar -C ${KCOV_ROOT} -xzvf ${KCOV_ROOT}/${KCOV_VERSION}.tar.gz
+          mkdir -p ${KCOV_ROOT}/build
+          cd ${KCOV_ROOT}/build && cmake -Wno-dev ${KCOV_ROOT}/kcov-${KCOV_VERSION} && cd -
+          make -C ${KCOV_ROOT}/build && sudo  make -C ${KCOV_ROOT}/build install
+    - name: Run shell tests (without coverage)
+      if: ${{ needs.changes.outputs.with_coverage == 'false' }}
+      run: |
+          share/spack/qa/run-shell-tests
+    - name: Run shell tests (with coverage)
+      if: ${{ needs.changes.outputs.with_coverage == 'true' }}
       env:
           COVERAGE: true
       run: |
           share/spack/qa/run-shell-tests
-    - uses: codecov/codecov-action@d9f34f8cd5cb3b3eb79b3e4b5dae3a16df499a70
+    - uses: codecov/codecov-action@v1
+      if: ${{ needs.changes.outputs.with_coverage == 'true' }}
       with:
         flags: shelltests,linux
+  # Test for Python2.6 run on Centos 6
+  centos6:
+    needs: [ validate, style, documentation, changes ]
+    runs-on: ubuntu-latest
+    container: spack/github-actions:centos6
+    steps:
+    - name: Run unit tests (full test-suite)
+      # The CentOS 6 container doesn't run with coverage, but
+      # under the same conditions it runs the full test suite
+      if: ${{ needs.changes.outputs.with_coverage == 'true' }}
+      env:
+          HOME: /home/spack-test
+      run: |
+          whoami && echo $HOME && cd $HOME
+          git clone https://github.com/spack/spack.git && cd spack
+          git fetch origin ${{ github.ref }}:test-branch
+          git checkout test-branch
+          share/spack/qa/run-unit-tests
+    - name: Run unit tests (only package tests)
+      if: ${{ needs.changes.outputs.with_coverage == 'false' }}
+      env:
+          HOME: /home/spack-test
+          ONLY_PACKAGES: true
+      run: |
+          whoami && echo $HOME && cd $HOME
+          git clone https://github.com/spack/spack.git && cd spack
+          git fetch origin ${{ github.ref }}:test-branch
+          git checkout test-branch
+          share/spack/qa/run-unit-tests
 
   # Test RHEL8 UBI with platform Python. This job is run
   # only on PRs modifying core Spack
   rhel8-platform-python:
+    needs: [ validate, style, documentation, changes ]
     runs-on: ubuntu-latest
+    if: ${{ needs.changes.outputs.with_coverage == 'true' }}
     container: registry.access.redhat.com/ubi8/ubi
     steps:
     - name: Install dependencies
@@ -138,7 +279,7 @@ jobs:
           dnf install -y \
               bzip2 curl file gcc-c++ gcc gcc-gfortran git gnupg2 gzip \
               make patch tcl unzip which xz
-    - uses: actions/checkout@93ea575cb5d8a053eaa0ac8fa3b40d7e05a33cc8 # @v2
+    - uses: actions/checkout@v2
     - name: Setup repo and non-root user
       run: |
           git --version
@@ -150,74 +291,105 @@ jobs:
       shell: runuser -u spack-test -- bash {0}
       run: |
           source share/spack/setup-env.sh
-          spack -d solve zlib
           spack unit-test -k 'not cvs and not svn and not hg' -x --verbose
   # Test for the clingo based solver (using clingo-cffi)
   clingo-cffi:
+    needs: [ validate, style, documentation, changes ]
     runs-on: ubuntu-latest
     steps:
-    - uses: actions/checkout@93ea575cb5d8a053eaa0ac8fa3b40d7e05a33cc8 # @v2
+    - uses: actions/checkout@v2
       with:
         fetch-depth: 0
-    - uses: actions/setup-python@13ae5bb136fac2878aff31522b9efb785519f984 # @v2
+    - uses: actions/setup-python@v2
       with:
-        python-version: '3.11'
+        python-version: 3.9
     - name: Install System packages
       run: |
           sudo apt-get -y update
           # Needed for unit tests
           sudo apt-get -y install \
               coreutils cvs gfortran graphviz gnupg2 mercurial ninja-build \
-              patchelf kcov
+              patchelf
+          # Needed for kcov
+          sudo apt-get -y install cmake binutils-dev libcurl4-openssl-dev
+          sudo apt-get -y install zlib1g-dev libdw-dev libiberty-dev
+    - name: Install kcov for bash script coverage
+      if: ${{ needs.changes.outputs.with_coverage == 'true' }}
+      env:
+          KCOV_VERSION: 34
+      run: |
+          KCOV_ROOT=$(mktemp -d)
+          wget --output-document=${KCOV_ROOT}/${KCOV_VERSION}.tar.gz https://github.com/SimonKagstrom/kcov/archive/v${KCOV_VERSION}.tar.gz
+          tar -C ${KCOV_ROOT} -xzvf ${KCOV_ROOT}/${KCOV_VERSION}.tar.gz
+          mkdir -p ${KCOV_ROOT}/build
+          cd ${KCOV_ROOT}/build && cmake -Wno-dev ${KCOV_ROOT}/kcov-${KCOV_VERSION} && cd -
+          make -C ${KCOV_ROOT}/build && sudo  make -C ${KCOV_ROOT}/build install
     - name: Install Python packages
       run: |
-          pip install --upgrade pip six setuptools pytest codecov coverage[toml] pytest-cov clingo pytest-xdist
+          pip install --upgrade pip six setuptools codecov coverage clingo
     - name: Setup git configuration
       run: |
           # Need this for the git tests to succeed.
           git --version
           . .github/workflows/setup_git.sh
     - name: Run unit tests (full suite with coverage)
+      if: ${{ needs.changes.outputs.with_coverage == 'true' }}
       env:
           COVERAGE: true
           SPACK_TEST_SOLVER: clingo
       run: |
           share/spack/qa/run-unit-tests
-    - uses: codecov/codecov-action@d9f34f8cd5cb3b3eb79b3e4b5dae3a16df499a70 # @v2.1.0
+          coverage combine
+          coverage xml
+    - name: Run unit tests (reduced suite without coverage)
+      if: ${{ needs.changes.outputs.with_coverage == 'false' }}
+      env:
+          ONLY_PACKAGES: true
+          SPACK_TEST_SOLVER: clingo
+      run: |
+          share/spack/qa/run-unit-tests
+    - uses: codecov/codecov-action@v1
+      if: ${{ needs.changes.outputs.with_coverage == 'true' }}
       with:
         flags: unittests,linux,clingo
   # Run unit tests on MacOS
-  macos:
+  build:
+    needs: [ validate, style, documentation, changes ]
     runs-on: macos-latest
     strategy:
       matrix:
-        python-version: ["3.10"]
+        python-version: [3.8]
     steps:
-    - uses: actions/checkout@93ea575cb5d8a053eaa0ac8fa3b40d7e05a33cc8 # @v2
+    - uses: actions/checkout@v2
       with:
         fetch-depth: 0
-    - uses: actions/setup-python@13ae5bb136fac2878aff31522b9efb785519f984 # @v2
+    - uses: actions/setup-python@v2
       with:
         python-version: ${{ matrix.python-version }}
     - name: Install Python packages
       run: |
           pip install --upgrade pip six setuptools
-          pip install --upgrade pytest codecov coverage[toml] pytest-xdist pytest-cov
+          pip install --upgrade codecov coverage
+          pip install --upgrade flake8 isort>=4.3.5 mypy>=0.800
     - name: Setup Homebrew packages
       run: |
         brew install dash fish gcc gnupg2 kcov
     - name: Run unit tests
-      env:
-        SPACK_TEST_SOLVER: clingo
-        SPACK_TEST_PARALLEL: 4
       run: |
         git --version
         . .github/workflows/setup_git.sh
         . share/spack/setup-env.sh
-        $(which spack) bootstrap disable spack-install
-        $(which spack) solve zlib
-        common_args=(--dist loadfile --tx '4*popen//python=./bin/spack-tmpconfig python -u ./bin/spack python' -x)
-        $(which spack) unit-test --cov --cov-config=pyproject.toml --cov-report=xml:coverage.xml "${common_args[@]}"
-    - uses: codecov/codecov-action@d9f34f8cd5cb3b3eb79b3e4b5dae3a16df499a70
+        if [ "${{ needs.changes.outputs.with_coverage }}" == "true" ]
+        then
+          coverage run $(which spack) unit-test -x
+          coverage combine
+          coverage xml
+        else
+          echo "ONLY PACKAGE RECIPES CHANGED [skipping coverage]"
+          $(which spack) unit-test -x -m "not maybeslow" -k "package_sanity"
+        fi
+    - uses: codecov/codecov-action@v1
+      if: ${{ needs.changes.outputs.with_coverage == 'true' }}
       with:
+        file: ./coverage.xml
         flags: unittests,macos

.github/workflows/valid-style.yml

@@ -1,60 +0,0 @@
-name: style
-
-on:
-  workflow_call:
-    inputs:
-      with_coverage:
-        required: true
-        type: string
-
-concurrency:
-  group: style-${{github.ref}}-${{github.event.pull_request.number || github.run_number}}
-  cancel-in-progress: true
-
-
-jobs:
-  # Validate that the code can be run on all the Python versions
-  # supported by Spack
-  validate:
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@93ea575cb5d8a053eaa0ac8fa3b40d7e05a33cc8 # @v2
-    - uses: actions/setup-python@13ae5bb136fac2878aff31522b9efb785519f984 # @v2
-      with:
-        python-version: '3.11'
-        cache: 'pip'
-    - name: Install Python Packages
-      run: |
-        pip install --upgrade pip
-        pip install --upgrade vermin
-    - name: vermin (Spack's Core)
-      run: vermin --backport argparse --violations --backport typing -t=2.7- -t=3.6- -vvv lib/spack/spack/ lib/spack/llnl/ bin/
-    - name: vermin (Repositories)
-      run: vermin --backport argparse --violations --backport typing -t=2.7- -t=3.6- -vvv var/spack/repos
-  # Run style checks on the files that have been changed
-  style:
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@93ea575cb5d8a053eaa0ac8fa3b40d7e05a33cc8 # @v2
-      with:
-        fetch-depth: 0
-    - uses: actions/setup-python@13ae5bb136fac2878aff31522b9efb785519f984 # @v2
-      with:
-        python-version: '3.11'
-        cache: 'pip'
-    - name: Install Python packages
-      run: |
-        python3 -m pip install --upgrade pip six setuptools types-six click==8.0.2 'black==21.12b0' mypy isort clingo flake8
-    - name: Setup git configuration
-      run: |
-        # Need this for the git tests to succeed.
-        git --version
-        . .github/workflows/setup_git.sh
-    - name: Run style tests
-      run: |
-          share/spack/qa/run-style-tests
-  audit:
-    uses: ./.github/workflows/audit.yaml
-    with:
-      with_coverage: ${{ inputs.with_coverage }}
-      python_version: '3.11'

.github/workflows/windows_python.yml

@@ -1,158 +0,0 @@
-name: windows
-
-on:
-  workflow_call:
-
-concurrency:
-  group: windows-${{github.ref}}-${{github.event.pull_request.number || github.run_number}}
-  cancel-in-progress: true
-
-defaults:
-  run:
-    shell:
-     powershell Invoke-Expression -Command ".\share\spack\qa\windows_test_setup.ps1"; {0}
-jobs:
-  unit-tests:
-    runs-on: windows-latest
-    steps:
-    - uses: actions/checkout@93ea575cb5d8a053eaa0ac8fa3b40d7e05a33cc8
-      with:
-        fetch-depth: 0
-    - uses: actions/setup-python@13ae5bb136fac2878aff31522b9efb785519f984
-      with:
-        python-version: 3.9
-    - name: Install Python packages
-      run: |
-          python -m pip install --upgrade pip six pywin32 setuptools codecov pytest-cov clingo
-    - name: Create local develop
-      run: |
-        .\spack\.github\workflows\setup_git.ps1
-    - name: Unit Test
-      run: |
-        echo F|xcopy .\spack\share\spack\qa\configuration\windows_config.yaml $env:USERPROFILE\.spack\windows\config.yaml
-        cd spack
-        dir
-        spack unit-test -x --verbose --cov --cov-config=pyproject.toml --ignore=lib/spack/spack/test/cmd
-        coverage combine -a
-        coverage xml
-    - uses: codecov/codecov-action@d9f34f8cd5cb3b3eb79b3e4b5dae3a16df499a70
-      with:
-        flags: unittests,windows
-  unit-tests-cmd:
-    runs-on: windows-latest
-    steps:
-    - uses: actions/checkout@93ea575cb5d8a053eaa0ac8fa3b40d7e05a33cc8
-      with:
-        fetch-depth: 0
-    - uses: actions/setup-python@13ae5bb136fac2878aff31522b9efb785519f984
-      with:
-        python-version: 3.9
-    - name: Install Python packages
-      run: |
-          python -m pip install --upgrade pip six pywin32 setuptools codecov coverage pytest-cov clingo
-    - name: Create local develop
-      run: |
-        .\spack\.github\workflows\setup_git.ps1
-    - name: Command Unit Test
-      run: |
-        echo F|xcopy .\spack\share\spack\qa\configuration\windows_config.yaml $env:USERPROFILE\.spack\windows\config.yaml
-        cd spack
-        spack unit-test -x --verbose --cov --cov-config=pyproject.toml lib/spack/spack/test/cmd
-        coverage combine -a
-        coverage xml
-    - uses: codecov/codecov-action@d9f34f8cd5cb3b3eb79b3e4b5dae3a16df499a70
-      with:
-        flags: unittests,windows
-  build-abseil:
-    runs-on: windows-latest
-    steps:
-    - uses: actions/checkout@93ea575cb5d8a053eaa0ac8fa3b40d7e05a33cc8
-      with:
-        fetch-depth: 0
-    - uses: actions/setup-python@13ae5bb136fac2878aff31522b9efb785519f984
-      with:
-        python-version: 3.9
-    - name: Install Python packages
-      run: |
-          python -m pip install --upgrade pip six pywin32 setuptools codecov coverage
-    - name: Build Test
-      run: |
-        spack compiler find
-        echo F|xcopy .\spack\share\spack\qa\configuration\windows_config.yaml $env:USERPROFILE\.spack\windows\config.yaml
-        spack external find cmake
-        spack external find ninja
-        spack -d install abseil-cpp
-  make-installer:
-    runs-on: windows-latest
-    steps:
-    - name: Disable Windows Symlinks
-      run: |
-        git config --global core.symlinks false
-      shell:
-        powershell
-    - uses: actions/checkout@93ea575cb5d8a053eaa0ac8fa3b40d7e05a33cc8
-      with:
-        fetch-depth: 0
-    - uses: actions/setup-python@13ae5bb136fac2878aff31522b9efb785519f984
-      with:
-        python-version: 3.9
-    - name: Install Python packages
-      run: |
-          python -m pip install --upgrade pip six pywin32 setuptools
-    - name: Add Light and Candle to Path
-      run: |
-        $env:WIX >> $GITHUB_PATH
-    - name: Run Installer
-      run: |
-        .\spack\share\spack\qa\setup_spack.ps1
-        spack make-installer -s spack -g SILENT pkg
-        echo "installer_root=$((pwd).Path)" | Out-File -FilePath $Env:GITHUB_ENV -Encoding utf8 -Append
-      env:
-        ProgressPreference: SilentlyContinue
-    - uses: actions/upload-artifact@83fd05a356d7e2593de66fc9913b3002723633cb
-      with:
-        name: Windows Spack Installer Bundle
-        path: ${{ env.installer_root }}\pkg\Spack.exe
-    - uses: actions/upload-artifact@83fd05a356d7e2593de66fc9913b3002723633cb
-      with:
-        name: Windows Spack Installer
-        path: ${{ env.installer_root}}\pkg\Spack.msi
-  execute-installer:
-    needs: make-installer
-    runs-on: windows-latest
-    defaults:
-      run:
-        shell: pwsh
-    steps:
-    - uses: actions/setup-python@13ae5bb136fac2878aff31522b9efb785519f984
-      with:
-        python-version: 3.9
-    - name: Install Python packages
-      run: |
-          python -m pip install --upgrade pip six pywin32 setuptools
-    - name: Setup installer directory
-      run: |
-        mkdir -p spack_installer
-        echo "spack_installer=$((pwd).Path)\spack_installer" | Out-File -FilePath $Env:GITHUB_ENV -Encoding utf8 -Append
-    - uses: actions/download-artifact@v3
-      with:
-        name: Windows Spack Installer Bundle
-        path: ${{ env.spack_installer }}
-    - name: Execute Bundled Installer
-      run: |
-        $proc = Start-Process  ${{ env.spack_installer }}\spack.exe "/install /quiet" -Passthru
-        $handle = $proc.Handle # cache proc.Handle
-        $proc.WaitForExit();
-        $LASTEXITCODE
-      env:
-        ProgressPreference: SilentlyContinue
-    - uses: actions/download-artifact@v3
-      with:
-        name: Windows Spack Installer
-        path: ${{ env.spack_installer }}
-    - name: Execute MSI
-      run: |
-        $proc = Start-Process  ${{ env.spack_installer }}\spack.msi "/quiet" -Passthru
-        $handle = $proc.Handle # cache proc.Handle
-        $proc.WaitForExit();
-        $LASTEXITCODE

.gitignore

@@ -136,7 +136,6 @@ venv/
 ENV/
 env.bak/
 venv.bak/
-!/lib/spack/env
 
 # Spyder project settings
 .spyderproject
@@ -210,9 +209,6 @@ tramp
 /eshell/history
 /eshell/lastdir
 
-# zsh byte-compiled files
-*.zwc
-
 # elpa packages
 /elpa/
 

.mypy.ini

@@ -0,0 +1,35 @@
+[mypy]
+python_version = 3.7
+files=lib/spack/llnl/**/*.py,lib/spack/spack/**/*.py
+mypy_path=bin,lib/spack,lib/spack/external,var/spack/repos/builtin
+# This and a generated import file allows supporting packages
+namespace_packages=True
+# To avoid re-factoring all the externals, ignore errors and missing imports
+# globally, then turn back on in spack and spack submodules
+ignore_errors=True
+ignore_missing_imports=True
+
+[mypy-spack.*]
+ignore_errors=False
+ignore_missing_imports=False
+
+[mypy-packages.*]
+ignore_errors=False
+ignore_missing_imports=False
+
+[mypy-llnl.*]
+ignore_errors=False
+ignore_missing_imports=False
+
+[mypy-spack.test.packages]
+ignore_errors=True
+
+# ignore errors in fake import path for packages
+[mypy-spack.pkg.*]
+ignore_errors=True
+ignore_missing_imports=True
+
+# jinja has syntax in it that requires python3 and causes a parse error
+# skip importing it
+[mypy-jinja2]
+follow_imports=skip

.readthedocs.yml

@@ -2,7 +2,6 @@ version: 2
 
 sphinx:
   configuration: lib/spack/docs/conf.py
-  fail_on_warning: true
 
 python:
   version: 3.7

CHANGELOG.md

@@ -1,725 +1,3 @@
-# v0.19.0 (2022-11-11)
-
-`v0.19.0` is a major feature release.
-
-## Major features in this release
-
-1. **Package requirements**
-
-   Spack's traditional [package preferences](
-     https://spack.readthedocs.io/en/latest/build_settings.html#package-preferences)
-   are soft, but we've added hard requriements to `packages.yaml` and `spack.yaml`
-   (#32528, #32369). Package requirements use the same syntax as specs:
-
-   ```yaml
-   packages:
-     libfabric:
-       require: "@1.13.2"
-     mpich:
-       require:
-       - one_of: ["+cuda", "+rocm"]
-   ```
-
-   More details in [the docs](
-     https://spack.readthedocs.io/en/latest/build_settings.html#package-requirements).
-
-2. **Environment UI Improvements**
-
-   * Fewer surprising modifications to `spack.yaml` (#33711):
-
-     * `spack install` in an environment will no longer add to the `specs:` list; you'll
-       need to either use `spack add <spec>` or `spack install --add <spec>`.
-
-     * Similarly, `spack uninstall` will not remove from your environment's `specs:`
-       list; you'll need to use `spack remove` or `spack uninstall --remove`.
-
-     This will make it easier to manage an environment, as there is clear separation
-     between the stack to be installed (`spack.yaml`/`spack.lock`) and which parts of
-     it should be installed (`spack install` / `spack uninstall`).
-
-   * `concretizer:unify:true` is now the default mode for new environments (#31787)
-
-     We see more users creating `unify:true` environments now. Users who need
-     `unify:false` can add it to their environment to get the old behavior. This will
-     concretize every spec in the environment independently.
-
-   * Include environment configuration from URLs (#29026, [docs](
-       https://spack.readthedocs.io/en/latest/environments.html#included-configurations))
-
-     You can now include configuration in your environment directly from a URL:
-
-     ```yaml
-     spack:
-       include:
-       - https://github.com/path/to/raw/config/compilers.yaml
-     ```
-
-4. **Multiple Build Systems**
-
-   An increasing number of packages in the ecosystem need the ability to support
-   multiple build systems (#30738, [docs](
-     https://spack.readthedocs.io/en/latest/packaging_guide.html#multiple-build-systems)),
-   either across versions, across platforms, or within the same version of the software.
-   This has been hard to support through multiple inheritance, as methods from different
-   build system superclasses would conflict. `package.py` files can now define separate
-   builder classes with installation logic for different build systems, e.g.:
-
-   ```python
-   class ArpackNg(CMakePackage, AutotoolsPackage):
-
-       build_system(
-           conditional("cmake", when="@0.64:"),
-           conditional("autotools", when="@:0.63"),
-           default="cmake",
-       )
-
-   class CMakeBuilder(spack.build_systems.cmake.CMakeBuilder):
-       def cmake_args(self):
-           pass
-
-   class Autotoolsbuilder(spack.build_systems.autotools.AutotoolsBuilder):
-       def configure_args(self):
-           pass
-   ```
-
-5. **Compiler and variant propagation**
-
-   Currently, compiler flags and variants are inconsistent: compiler flags set for a
-   package are inherited by its dependencies, while variants are not. We should have
-   these be consistent by allowing for inheritance to be enabled or disabled for both
-   variants and compiler flags.
-
-   Example syntax:
-   - `package ++variant`:
-         enabled variant that will be propagated to dependencies
-   - `package +variant`:
-         enabled variant that will NOT be propagated to dependencies
-   - `package ~~variant`:
-         disabled variant that will be propagated to dependencies
-   - `package ~variant`:
-         disabled variant that will NOT be propagated to dependencies
-   - `package cflags==-g`:
-         `cflags` will be propagated to dependencies
-   - `package cflags=-g`:
-         `cflags` will NOT be propagated to dependencies
-
-   Syntax for non-boolan variants is similar to compiler flags. More in the docs for
-   [variants](
-     https://spack.readthedocs.io/en/latest/basic_usage.html#variants) and [compiler flags](
-     https://spack.readthedocs.io/en/latest/basic_usage.html#compiler-flags).
-
-6. **Enhancements to git version specifiers**
-
-   * `v0.18.0` added the ability to use git commits as versions. You can now use the
-     `git.` prefix to specify git tags or branches as versions. All of these are valid git
-     versions in `v0.19` (#31200):
-
-     ```console
-     foo@abcdef1234abcdef1234abcdef1234abcdef1234      # raw commit
-     foo@git.abcdef1234abcdef1234abcdef1234abcdef1234  # commit with git prefix
-     foo@git.develop                                   # the develop branch
-     foo@git.0.19                                      # use the 0.19 tag
-     ```
-
-   * `v0.19` also gives you more control over how Spack interprets git versions, in case
-     Spack cannot detect the version from the git repository. You can suffix a git
-     version with `=<version>` to force Spack to concretize it as a particular version
-     (#30998, #31914, #32257):
-
-     ```console
-     # use mybranch, but treat it as version 3.2 for version comparison
-     foo@git.mybranch=3.2
-
-     # use the given commit, but treat it as develop for version comparison
-     foo@git.abcdef1234abcdef1234abcdef1234abcdef1234=develop
-     ```
-
-     More in [the docs](
-       https://spack.readthedocs.io/en/latest/basic_usage.html#version-specifier)
-
-7. **Changes to Cray EX Support**
-
-   Cray machines have historically had their own "platform" within Spack, because we
-   needed to go through the module system to leverage compilers and MPI installations on
-   these machines. The Cray EX programming environment now provides standalone `craycc`
-   executables and proper `mpicc` wrappers, so Spack can treat EX machines like Linux
-   with extra packages (#29392).
-
-   We expect this to greatly reduce bugs, as external packages and compilers can now be
-   used by prefix instead of through modules. We will also no longer be subject to
-   reproducibility issues when modules change from Cray PE release to release and from
-   site to site. This also simplifies dealing with the underlying Linux OS on cray
-   systems, as Spack will properly model the machine's OS as either SuSE or RHEL.
-
-8. **Improvements to tests and testing in CI**
-
-   * `spack ci generate --tests` will generate a `.gitlab-ci.yml` file that not only does
-     builds but also runs tests for built packages (#27877). Public GitHub pipelines now
-     also run tests in CI.
-
-   * `spack test run --explicit` will only run tests for packages that are explicitly
-     installed, instead of all packages.
-
-9. **Experimental binding link model**
-
-   You can add a new option to `config.yaml` to make Spack embed absolute paths to
-   needed shared libraries in ELF executables and shared libraries on Linux (#31948, [docs](
-     https://spack.readthedocs.io/en/latest/config_yaml.html#shared-linking-bind)):
-
-   ```yaml
-   config:
-     shared_linking:
-       type: rpath
-       bind: true
-   ```
-
-   This can improve launch time at scale for parallel applications, and it can make
-   installations less susceptible to environment variables like `LD_LIBRARY_PATH`, even
-   especially when dealing with external libraries that use `RUNPATH`. You can think of
-   this as a faster, even higher-precedence version of `RPATH`.
-
-## Other new features of note
-
-* `spack spec` prints dependencies more legibly. Dependencies in the output now appear
-  at the *earliest* level of indentation possible (#33406)
-* You can override `package.py` attributes like `url`, directly in `packages.yaml`
-  (#33275, [docs](
-    https://spack.readthedocs.io/en/latest/build_settings.html#assigning-package-attributes))
-* There are a number of new architecture-related format strings you can use in Spack
-  configuration files to specify paths (#29810, [docs](
-    https://spack.readthedocs.io/en/latest/configuration.html#config-file-variables))
-* Spack now supports bootstrapping Clingo on Windows (#33400)
-* There is now support for an `RPATH`-like library model on Windows (#31930)
-
-## Performance Improvements
-
-* Major performance improvements for installation from binary caches (#27610, #33628,
-  #33636, #33608, #33590, #33496)
-* Test suite can now be parallelized using `xdist` (used in GitHub Actions) (#32361)
-* Reduce lock contention for parallel builds in environments (#31643)
-
-## New binary caches and stacks
-
-* We now build nearly all of E4S with `oneapi` in our buildcache (#31781, #31804,
-  #31804, #31803, #31840, #31991, #32117, #32107, #32239)
-* Added 3 new machine learning-centric stacks to binary cache: `x86_64_v3`, CUDA, ROCm
-  (#31592, #33463)
-
-## Removals and Deprecations
-
-* Support for Python 3.5 is dropped (#31908). Only Python 2.7 and 3.6+ are officially
-  supported.
-
-* This is the last Spack release that will support Python 2 (#32615). Spack `v0.19`
-  will emit a deprecation warning if you run it with Python 2, and Python 2 support will
-  soon be removed from the `develop` branch.
-
-* `LD_LIBRARY_PATH` is no longer set by default by `spack load` or module loads.
-
-  Setting `LD_LIBRARY_PATH` in Spack environments/modules can cause binaries from
-  outside of Spack to crash, and Spack's own builds use `RPATH` and do not need
-  `LD_LIBRARY_PATH` set in order to run. If you still want the old behavior, you
-  can run these commands to configure Spack to set `LD_LIBRARY_PATH`:
-
-  ```console
-  spack config add modules:prefix_inspections:lib64:[LD_LIBRARY_PATH]
-  spack config add modules:prefix_inspections:lib:[LD_LIBRARY_PATH]
-  ```
-
-* The `spack:concretization:[together|separately]` has been removed after being
-  deprecated in `v0.18`. Use `concretizer:unify:[true|false]`.
-* `config:module_roots` is no longer supported after being deprecated in `v0.18`. Use
-  configuration in module sets instead (#28659, [docs](
-    https://spack.readthedocs.io/en/latest/module_file_support.html)).
-* `spack activate` and `spack deactivate` are no longer supported, having been
-  deprecated in `v0.18`. Use an environment with a view instead of
-  activating/deactivating ([docs](
-    https://spack.readthedocs.io/en/latest/environments.html#configuration-in-spack-yaml)).
-* The old YAML format for buildcaches is now deprecated (#33707). If you are using an
-  old buildcache with YAML metadata you will need to regenerate it with JSON metadata.
-* `spack bootstrap trust` and `spack bootstrap untrust` are deprecated in favor of
-  `spack bootstrap enable` and `spack bootstrap disable` and will be removed in `v0.20`.
-  (#33600)
-* The `graviton2` architecture has been renamed to `neoverse_n1`, and `graviton3`
-  is now `neoverse_v1`. Buildcaches using the old architecture names will need to be rebuilt.
-* The terms `blacklist` and `whitelist` have been replaced with `include` and `exclude`
-  in all configuration files (#31569). You can use `spack config update` to
-  automatically fix your configuration files.
-
-## Notable Bugfixes
-
-* Permission setting on installation now handles effective uid properly (#19980)
-* `buildable:true` for an MPI implementation now overrides `buildable:false` for `mpi` (#18269)
-* Improved error messages when attempting to use an unconfigured compiler (#32084)
-* Do not punish explicitly requested compiler mismatches in the solver (#30074)
-* `spack stage`: add missing --fresh and --reuse (#31626)
-* Fixes for adding build system executables like `cmake` to package scope (#31739)
-* Bugfix for binary relocation with aliased strings produced by newer `binutils` (#32253)
-
-## Spack community stats
-
-* 6,751 total packages, 335 new since `v0.18.0`
-    * 141 new Python packages
-    * 89 new R packages
-* 303 people contributed to this release
-    * 287 committers to packages
-    * 57 committers to core
-
-
-# v0.18.1 (2022-07-19)
-
-### Spack Bugfixes
-* Fix several bugs related to bootstrapping (#30834,#31042,#31180)
-* Fix a regression that was causing spec hashes to differ between
-  Python 2 and Python 3 (#31092)
-* Fixed compiler flags for oneAPI and DPC++ (#30856)
-* Fixed several issues related to concretization (#31142,#31153,#31170,#31226)
-* Improved support for Cray manifest file and `spack external find` (#31144,#31201,#31173,#31186)
-* Assign a version to openSUSE Tumbleweed according to the GLIBC version
-  in the system (#19895)
-* Improved Dockerfile generation for `spack containerize` (#29741,#31321)
-* Fixed a few bugs related to concurrent execution of commands (#31509,#31493,#31477)
-
-### Package updates
-* WarpX: add v22.06, fixed libs property (#30866,#31102)
-* openPMD: add v0.14.5, update recipe for @develop (#29484,#31023)
-
-# v0.18.0 (2022-05-28)
-
-`v0.18.0` is a major feature release.
-
-## Major features in this release
-
-1. **Concretizer now reuses by default**
-
-   `spack install --reuse` was introduced in `v0.17.0`, and `--reuse`
-   is now the default concretization mode. Spack will try hard to
-   resolve dependencies using installed packages or binaries (#30396).
-
-   To avoid reuse and to use the latest package configurations, (the
-   old default), you can use `spack install --fresh`, or add
-   configuration like this to your environment or `concretizer.yaml`:
-
-   ```yaml
-   concretizer:
-       reuse: false
-   ```
-
-2. **Finer-grained hashes**
-
-   Spack hashes now include `link`, `run`, *and* `build` dependencies,
-   as well as a canonical hash of package recipes. Previously, hashes
-   only included `link` and `run` dependencies (though `build`
-   dependencies were stored by environments). We coarsened the hash to
-   reduce churn in user installations, but the new default concretizer
-   behavior mitigates this concern and gets us reuse *and* provenance.
-   You will be able to see the build dependencies of new installations
-   with `spack find`. Old installations will not change and their
-   hashes will not be affected. (#28156, #28504, #30717, #30861)
-
-3. **Improved error messages**
-
-   Error handling with the new concretizer is now done with
-   optimization criteria rather than with unsatisfiable cores, and
-   Spack reports many more details about conflicting constraints.
-   (#30669)
-
-4. **Unify environments when possible**
-
-   Environments have thus far supported `concretization: together` or
-   `concretization: separately`. These have been replaced by a new
-   preference in `concretizer.yaml`:
-
-   ```yaml
-   concretizer:
-       unify: [true|false|when_possible]
-   ```
-
-   `concretizer:unify:when_possible` will *try* to resolve a fully
-   unified environment, but if it cannot, it will create multiple
-   configurations of some packages where it has to. For large
-   environments that previously had to be concretized separately, this
-   can result in a huge speedup (40-50x). (#28941)
-
-5. **Automatically find externals on Cray machines**
-
-   Spack can now automatically discover installed packages in the Cray
-   Programming Environment by running `spack external find` (or `spack
-   external read-cray-manifest` to *only* query the PE). Packages from
-   the PE (e.g., `cray-mpich` are added to the database with full
-   dependency information, and compilers from the PE are added to
-   `compilers.yaml`. Available with the June 2022 release of the Cray
-   Programming Environment. (#24894, #30428)
-
-6. **New binary format and hardened signing**
-
-   Spack now has an updated binary format, with improvements for
-   security. The new format has a detached signature file, and Spack
-   verifies the signature before untarring or decompressing the binary
-   package. The previous format embedded the signature in a `tar`
-   file, which required the client to run `tar` *before* verifying
-   (#30750). Spack can still install from build caches using the old
-   format, but we encourage users to switch to the new format going
-   forward.
-
-   Production GitLab pipelines have been hardened to securely sign
-   binaries. There is now a separate signing stage so that signing
-   keys are never exposed to build system code, and signing keys are
-   ephemeral and only live as long as the signing pipeline stage.
-   (#30753)
-
-7. **Bootstrap mirror generation**
-
-   The `spack bootstrap mirror` command can automatically create a
-   mirror for bootstrapping the concretizer and other needed
-   dependencies in an air-gapped environment. (#28556)
-
-8. **Nascent Windows support**
-
-   Spack now has initial support for Windows. Spack core has been
-   refactored to run in the Windows environment, and a small number of
-   packages can now build for Windows. More details are
-   [in the documentation](https://spack.rtfd.io/en/latest/getting_started.html#spack-on-windows)
-   (#27021, #28385, many more)
-
-9. **Makefile generation**
-
-   `spack env depfile` can be used to generate a `Makefile` from an
-   environment, which can be used to build packages the environment
-   in parallel on a single node. e.g.:
-
-   ```console
-   spack -e myenv env depfile > Makefile
-   make
-   ```
-
-   Spack propagates `gmake` jobserver information to builds so that
-   their jobs can share cores. (#30039, #30254, #30302, #30526)
-
-10. **New variant features**
-
-    In addition to being conditional themselves, variants can now have
-    [conditional *values*](https://spack.readthedocs.io/en/latest/packaging_guide.html#conditional-possible-values)
-    that are only possible for certain configurations of a package. (#29530)
-
-    Variants can be
-    [declared "sticky"](https://spack.readthedocs.io/en/latest/packaging_guide.html#sticky-variants),
-    which prevents them from being enabled or disabled by the
-    concretizer. Sticky variants must be set explicitly by users
-    on the command line or in `packages.yaml`. (#28630)
-
-* Allow conditional possible values in variants
-* Add a "sticky" property to variants
-
-
-## Other new features of note
-
-* Environment views can optionally link only `run` dependencies
-  with `link:run` (#29336)
-* `spack external find --all` finds library-only packages in
-  addition to build dependencies (#28005)
-* Customizable `config:license_dir` option (#30135)
-* `spack external find --path PATH` takes a custom search path (#30479)
-* `spack spec` has a new `--format` argument like `spack find` (#27908)
-* `spack concretize --quiet` skips printing concretized specs (#30272)
-* `spack info` now has cleaner output and displays test info (#22097)
-* Package-level submodule option for git commit versions (#30085, #30037)
-* Using `/hash` syntax to refer to concrete specs in an environment
-  now works even if `/hash` is not installed. (#30276)
-
-## Major internal refactors
-
-* full hash (see above)
-* new develop versioning scheme `0.19.0-dev0`
-* Allow for multiple dependencies/dependents from the same package (#28673)
-* Splice differing virtual packages (#27919)
-
-## Performance Improvements
-
-* Concretization of large environments with `unify: when_possible` is
-  much faster than concretizing separately (#28941, see above)
-* Single-pass view generation algorithm is 2.6x faster (#29443)
-
-## Archspec improvements
-
-* `oneapi` and `dpcpp` flag support (#30783)
-* better support for `M1` and `a64fx` (#30683)
-
-## Removals and Deprecations
-
-* Spack no longer supports Python `2.6` (#27256)
-* Removed deprecated `--run-tests` option of `spack install`;
-  use `spack test` (#30461)
-* Removed deprecated `spack flake8`; use `spack style` (#27290)
-
-* Deprecate `spack:concretization` config option; use
-  `concretizer:unify` (#30038)
-* Deprecate top-level module configuration; use module sets (#28659)
-* `spack activate` and `spack deactivate` are deprecated in favor of
-  environments; will be removed in `0.19.0` (#29430; see also `link:run`
-  in #29336 above)
-
-## Notable Bugfixes
-
-* Fix bug that broke locks with many parallel builds (#27846)
-* Many bugfixes and consistency improvements for the new concretizer
-  and `--reuse` (#30357, #30092, #29835, #29933, #28605, #29694, #28848)
-
-## Packages
-
-* `CMakePackage` uses `CMAKE_INSTALL_RPATH_USE_LINK_PATH` (#29703)
-* Refactored `lua` support: `lua-lang` virtual supports both
-  `lua` and `luajit` via new `LuaPackage` build system(#28854)
-* PythonPackage: now installs packages with `pip` (#27798)
-* Python: improve site_packages_dir handling (#28346)
-* Extends: support spec, not just package name (#27754)
-* `find_libraries`: search for both .so and .dylib on macOS (#28924)
-* Use stable URLs and `?full_index=1` for all github patches (#29239)
-
-## Spack community stats
-
-* 6,416 total packages, 458 new since `v0.17.0`
-    * 219 new Python packages
-    * 60 new R packages
-* 377 people contributed to this release
-    * 337 committers to packages
-    * 85 committers to core
-
-# v0.17.3 (2022-07-14)
-
-### Spack bugfixes
-
-* Fix missing chgrp on symlinks in package installations (#30743)
-* Allow having non-existing upstreams (#30744, #30746)
-* Fix `spack stage` with custom paths (#30448)
-* Fix failing call for `spack buildcache save-specfile` (#30637)
-* Fix globbing in compiler wrapper (#30699)
-
-# v0.17.2 (2022-04-13)
-
-### Spack bugfixes
-* Fix --reuse with upstreams set in an environment (#29680)
-* config add: fix parsing of validator error to infer type from oneOf (#29475)
-* Fix spack -C command_line_scope used in conjunction with other flags (#28418)
-* Use Spec.constrain to construct spec lists for stacks (#28783)
-* Fix bug occurring when searching for inherited patches in packages (#29574)
-* Fixed a few bugs when manipulating symlinks (#28318, #29515, #29636)
-* Fixed a few minor bugs affecting command prompt, terminal title and argument completion (#28279, #28278, #28939, #29405, #29070, #29402)
-* Fixed a few bugs affecting the spack ci command (#29518, #29419)
-* Fix handling of Intel compiler environment (#29439)
-* Fix a few edge cases when reindexing the DB (#28764)
-* Remove "Known issues" from documentation (#29664)
-* Other miscellaneous bugfixes (0b72e070583fc5bcd016f5adc8a84c99f2b7805f, #28403, #29261)
-
-# v0.17.1 (2021-12-23)
-
-### Spack Bugfixes
-* Allow locks to work under high contention (#27846)
-* Improve errors messages from clingo (#27707 #27970)
-* Respect package permissions for sbang (#25764)
-* Fix --enable-locks behavior (#24675)
-* Fix log-format reporter ignoring install errors (#25961)
-* Fix overloaded argparse keys (#27379)
-* Allow style commands to run with targets other than "develop" (#27472)
-* Log lock messages to debug level, instead of verbose level (#27408)
-* Handle invalid unicode while logging (#21447)
-* spack audit: fix API calls to variants (#27713)
-* Provide meaningful message for empty environment installs (#28031)
-* Added opensuse leap containers to spack containerize (#27837)
-* Revert "patches: make re-applied patches idempotent" (#27625)
-* MANPATH can use system defaults (#21682)
-* Add "setdefault" subcommand to `spack module tcl` (#14686)
-* Regenerate views when specs already installed (#28113)
-
-### Package bugfixes
-* Fix external package detection for OpenMPI (#27255)
-* Update the UPC++ package to 2021.9.0 (#26996)
-* Added py-vermin v1.3.2 (#28072)
-
-# v0.17.0 (2021-11-05)
-
-`v0.17.0` is a major feature release.
-
-## Major features in this release
-
-1. **New concretizer is now default**
-   The new concretizer introduced as an experimental feature in `v0.16.0`
-   is now the default (#25502). The new concretizer is based on the
-   [clingo](https://github.com/potassco/clingo) logic programming system,
-   and it enables us to do much higher quality and faster dependency solving
-   The old concretizer is still available via the `concretizer: original`
-   setting, but it is deprecated and will be removed in `v0.18.0`.
-
-2. **Binary Bootstrapping**
-   To make it easier to use the new concretizer and binary packages,
-   Spack now bootstraps `clingo` and `GnuPG` from public binaries. If it
-   is not able to bootstrap them from binaries, it installs them from
-   source code. With these changes, you should still be able to clone Spack
-   and start using it almost immediately. (#21446, #22354, #22489, #22606,
-   #22720, #22720, #23677, #23946, #24003, #25138, #25607, #25964, #26029,
-   #26399, #26599).
-
-3. **Reuse existing packages (experimental)**
-   The most wanted feature from our
-   [2020 user survey](https://spack.io/spack-user-survey-2020/) and
-   the most wanted Spack feature of all time (#25310). `spack install`,
-   `spack spec`, and `spack concretize` now have a `--reuse` option, which
-   causes Spack to minimize the number of rebuilds it does. The `--reuse`
-   option will try to find existing installations and binary packages locally
-   and in registered mirrors, and will prefer to use them over building new
-   versions. This will allow users to build from source *far* less than in
-   prior versions of Spack. This feature will continue to be improved, with
-   configuration options and better CLI expected in `v0.17.1`. It will become
-   the *default* concretization mode in `v0.18.0`.
-
-4. **Better error messages**
-   We have improved the error messages generated by the new concretizer by
-   using *unsatisfiable cores*. Spack will now print a summary of the types
-   of constraints that were violated to make a spec unsatisfiable (#26719).
-
-5. **Conditional variants**
-   Variants can now have a `when="<spec>"` clause, allowing them to be
-   conditional based on the version or other attributes of a package (#24858).
-
-6. **Git commit versions**
-   In an environment and on the command-line, you can now provide a full,
-   40-character git commit as a version for any package with a top-level
-   `git` URL.  e.g., `spack install hdf5@45bb27f58240a8da7ebb4efc821a1a964d7712a8`.
-   Spack will compare the commit to tags in the git repository to understand
-   what versions it is ahead of or behind.
-
-7. **Override local config and cache directories**
-   You can now set `SPACK_DISABLE_LOCAL_CONFIG` to disable the `~/.spack` and
-   `/etc/spack` configuration scopes. `SPACK_USER_CACHE_PATH` allows you to
-   move caches out of `~/.spack`, as well (#27022, #26735). This addresses
-   common problems where users could not isolate CI environments from local
-   configuration.
-
-8. **Improvements to Spack Containerize**
-   For added reproducibility, you can now pin the Spack version used by
-   `spack containerize` (#21910). The container build will only build
-   with the Spack version pinned at build recipe creation instead of the
-   latest Spack version.
-
-9. **New commands for dealing with tags**
-   The `spack tags` command allows you to list tags on packages (#26136), and you
-   can list tests and filter tags with `spack test list` (#26842).
-
-## Other new features of note
-
-* Copy and relocate environment views as stand-alone installations (#24832)
-* `spack diff` command can diff two installed specs (#22283, #25169)
-* `spack -c <config>` can set one-off config parameters on CLI (#22251)
-* `spack load --list` is an alias for `spack find --loaded` (#27184)
-* `spack gpg` can export private key with `--secret` (#22557)
-* `spack style` automatically bootstraps dependencies (#24819)
-* `spack style --fix` automatically invokes `isort` (#24071)
-* build dependencies can be installed from build caches with `--include-build-deps` (#19955)
-* `spack audit` command for checking package constraints (#23053)
-* Spack can now fetch from `CVS` repositories (yep, really) (#23212)
-* `spack monitor` lets you upload analysis about installations to a
-  [spack monitor server](https://github.com/spack/spack-monitor) (#23804, #24321,
-  #23777, #25928))
-* `spack python --path` shows which `python` Spack is using (#22006)
-* `spack env activate --temp` can create temporary environments (#25388)
-* `--preferred` and `--latest` options for `spack checksum` (#25830)
-* `cc` is now pure posix and runs on Alpine (#26259)
-* `SPACK_PYTHON` environment variable sets which `python` spack uses (#21222)
-* `SPACK_SKIP_MODULES` lets you source `setup-env.sh` faster if you don't need modules (#24545)
-
-## Major internal refactors
-
-* `spec.yaml` files are now `spec.json`, yielding a large speed improvement (#22845)
-* Splicing allows Spack specs to store mixed build provenance (#20262)
-* More extensive hooks API for installations (#21930)
-* New internal API for getting the active environment (#25439)
-
-## Performance Improvements
-
-* Parallelize separate concretization in environments; Previously 55 min E4S solve
-    now takes 2.5 min (#26264)
-* Drastically improve YamlFilesystemView file removal performance via batching (#24355)
-* Speed up spec comparison (#21618)
-* Speed up environment activation (#25633)
-
-## Archspec improvements
-* support for new generic `x86_64_v2`, `x86_64_v3`, `x86_64_v4` targets
-    (see [archspec#31](https://github.com/archspec/archspec-json/pull/31))
-* `spack arch --generic` lets you get the best generic architecture for
-    your node (#27061)
-* added support for aocc (#20124), `arm` compiler on `graviton2` (#24904)
-    and on `a64fx` (#24524),
-
-## Infrastructure, buildcaches, and services
-
-* Add support for GCS Bucket Mirrors (#26382)
-* Add `spackbot` to help package maintainers with notifications. See
-  [spack.github.io/spackbot](https://spack.github.io/spackbot/)
-* Reproducible pipeline builds with `spack ci rebuild` (#22887)
-* Removed redundant concretizations from GitLab pipeline generation (#26622)
-* Spack CI no longer generates jobs for unbuilt specs (#20435)
-* Every pull request pipeline has its own buildcache (#25529)
-* `--no-add` installs only specified specs and only if already present in… (#22657)
-* Add environment-aware `spack buildcache sync` command (#25470)
-* Binary cache installation speedups and improvements (#19690, #20768)
-
-## Deprecations and Removals
-
-* `spack setup` was deprecated in v0.16.0, and has now been removed.
-  Use `spack develop` and `spack dev-build`.
-* Remove unused `--dependencies` flag from `spack load` (#25731)
-* Remove stubs for `spack module [refresh|find|rm|loads]`, all of which
-  were deprecated in 2018.
-
-## Notable Bugfixes
-
-* Deactivate previous env before activating new one (#25409)
-* Many fixes to error codes from `spack install` (#21319, #27012, #25314)
-* config add: infer type based on JSON schema validation errors (#27035)
-* `spack config edit` now works even if `spack.yaml` is broken (#24689)
-
-## Packages
-
-* Allow non-empty version ranges like `1.1.0:1.1` (#26402)
-* Remove `.99`'s from many version ranges (#26422)
-* Python: use platform-specific site packages dir (#25998)
-* `CachedCMakePackage` for using *.cmake initial config files (#19316)
-* `lua-lang` allows swapping `lua` and `luajit` (#22492)
-* Better support for `ld.gold` and `ld.lld` (#25626)
-* build times are now stored as metadata in `$prefix/.spack` (#21179)
-* post-install tests can be reused in smoke tests (#20298)
-* Packages can use `pypi` attribute to infer `homepage`/`url`/`list_url` (#17587)
-* Use gnuconfig package for `config.guess` file replacement (#26035)
-* patches: make re-applied patches idempotent (#26784)
-
-## Spack community stats
-
-* 5969 total packages, 920 new since `v0.16.0`
-    * 358 new Python packages, 175 new R packages
-* 513 people contributed to this release
-    * 490 committers to packages
-    * 105 committers to core
-* Lots of GPU updates:
-    * ~77 CUDA-related commits
-    * ~66 AMD-related updates
-    * ~27 OneAPI-related commits
-    * 30 commits from AMD toolchain support
-* `spack test` usage in packages is increasing
-    * 1669 packages with tests (mostly generic python tests)
-    * 93 packages with their own tests
-
-
-# v0.16.3 (2021-09-21)
-
-* clang/llvm: fix version detection (#19978)
-* Fix use of quotes in Python build system (#22279)
-* Cray: fix extracting paths from module files (#23472)
-* Use AWS CloudFront for source mirror (#23978)
-* Ensure all roots of an installed environment are marked explicit in db (#24277)
-* Fix fetching for Python 3.8 and 3.9 (#24686)
-* locks: only open lockfiles once instead of for every lock held (#24794)
-* Remove the EOL centos:6 docker image
-
 # v0.16.2 (2021-05-22)
 
 * Major performance improvement for `spack load` and other commands. (#23661)

CITATION.cff

@@ -1,58 +0,0 @@
-# If you are referencing Spack in a publication, please cite the SC'15 paper
-# described here.
-#
-# Here's the raw citation:
-#
-#   Todd Gamblin, Matthew P. LeGendre, Michael R. Collette, Gregory L. Lee,
-#   Adam Moody, Bronis R. de Supinski, and W. Scott Futral.
-#   The Spack Package Manager: Bringing Order to HPC Software Chaos.
-#   In Supercomputing 2015 (SC’15), Austin, Texas, November 15-20 2015. LLNL-CONF-669890.
-#
-# Or, in BibTeX:
-#
-# @inproceedings{Gamblin_The_Spack_Package_2015,
-#     address = {Austin, Texas, USA},
-#     author = {Gamblin, Todd and LeGendre, Matthew and
-#               Collette, Michael R. and Lee, Gregory L. and
-#               Moody, Adam and de Supinski, Bronis R. and Futral, Scott},
-#     doi = {10.1145/2807591.2807623},
-#     month = {November 15-20},
-#     note = {LLNL-CONF-669890},
-#     series = {Supercomputing 2015 (SC’15)},
-#     title = {{The Spack Package Manager: Bringing Order to HPC Software Chaos}},
-#     url = {https://github.com/spack/spack},
-#     year = {2015}
-# }
-#
-# And here's the CITATION.cff format:
-#
-cff-version: 1.2.0
-message: "If you are referencing Spack in a publication, please cite the paper below."
-preferred-citation:
-  type: conference-paper
-  doi: "10.1145/2807591.2807623"
-  url: "https://github.com/spack/spack"
-  authors:
-  - family-names: "Gamblin"
-    given-names: "Todd"
-  - family-names: "LeGendre"
-    given-names: "Matthew"
-  - family-names: "Collette"
-    given-names: "Michael R."
-  - family-names: "Lee"
-    given-names: "Gregory L."
-  - family-names: "Moody"
-    given-names: "Adam"
-  - family-names: "de Supinski"
-    given-names: "Bronis R."
-  - family-names: "Futral"
-    given-names: "Scott"
-  title: "The Spack Package Manager: Bringing Order to HPC Software Chaos"
-  conference:
-    name: "Supercomputing 2015 (SC’15)"
-    city: "Austin"
-    region: "Texas"
-    country: "USA"
-  month: November 15-20
-  year: 2015
-  notes: LLNL-CONF-669890

COPYRIGHT

@@ -34,22 +34,10 @@ includes the sbang tool directly in bin/sbang. These packages are covered
 by various permissive licenses. A summary listing follows. See the
 license included with each package for full details.
 
-PackageName: altgraph
-PackageHomePage: https://altgraph.readthedocs.io/en/latest/index.html
-PackageLicenseDeclared: MIT
-
 PackageName: argparse
 PackageHomePage: https://pypi.python.org/pypi/argparse
 PackageLicenseDeclared: Python-2.0
 
-PackageName: astunparse
-PackageHomePage: https://github.com/simonpercivall/astunparse
-PackageLicenseDeclared: Python-2.0
-
-PackageName: attrs
-PackageHomePage: https://github.com/python-attrs/attrs
-PackageLicenseDeclared: MIT
-
 PackageName: ctest_log_parser
 PackageHomePage: https://github.com/Kitware/CMake
 PackageLicenseDeclared: BSD-3-Clause
@@ -58,8 +46,8 @@ PackageName: distro
 PackageHomePage: https://pypi.python.org/pypi/distro
 PackageLicenseDeclared: Apache-2.0
 
-PackageName: functools32
-PackageHomePage: https://github.com/MiCHiLU/python-functools32
+PackageName: functools
+PackageHomePage: https://github.com/python/cpython/blob/2.7/Lib/functools.py
 PackageLicenseDeclared: Python-2.0
 
 PackageName: jinja2
@@ -70,10 +58,6 @@ PackageName: jsonschema
 PackageHomePage: https://pypi.python.org/pypi/jsonschema
 PackageLicenseDeclared: MIT
 
-PackageName: macholib
-PackageHomePage: https://macholib.readthedocs.io/en/latest/index.html
-PackageLicenseDeclared: MIT
-
 PackageName: markupsafe
 PackageHomePage: https://pypi.python.org/pypi/MarkupSafe
 PackageLicenseDeclared: BSD-3-Clause
@@ -86,10 +70,6 @@ PackageName: py
 PackageHomePage: https://pypi.python.org/pypi/py
 PackageLicenseDeclared: MIT
 
-PackageName: pyrsistent
-PackageHomePage: http://github.com/tobgu/pyrsistent
-PackageLicenseDeclared: MIT
-
 PackageName: pytest
 PackageHomePage: https://pypi.python.org/pypi/pytest
 PackageLicenseDeclared: MIT
@@ -105,3 +85,11 @@ PackageLicenseDeclared: Apache-2.0 OR MIT
 PackageName: six
 PackageHomePage: https://pypi.python.org/pypi/six
 PackageLicenseDeclared: MIT
+
+PackageName: macholib
+PackageHomePage: https://macholib.readthedocs.io/en/latest/index.html
+PackageLicenseDeclared: MIT
+
+PackageName: altgraph
+PackageHomePage: https://altgraph.readthedocs.io/en/latest/index.html
+PackageLicenseDeclared: MIT

LICENSE-MIT

@@ -1,6 +1,6 @@
 MIT License
 
-Copyright (c) 2013-2022 LLNS, LLC and other Spack Project Developers.
+Copyright (c) 2013-2020 LLNS, LLC and other Spack Project Developers.
 
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal

README.md

@@ -1,11 +1,10 @@
 # <img src="https://cdn.rawgit.com/spack/spack/develop/share/spack/logo/spack-logo.svg" width="64" valign="middle" alt="Spack"/> Spack
 
 [![Unit Tests](https://github.com/spack/spack/workflows/linux%20tests/badge.svg)](https://github.com/spack/spack/actions)
-[![Bootstrapping](https://github.com/spack/spack/actions/workflows/bootstrap.yml/badge.svg)](https://github.com/spack/spack/actions/workflows/bootstrap.yml)
+[![Linux Builds](https://github.com/spack/spack/workflows/linux%20builds/badge.svg)](https://github.com/spack/spack/actions)
+[![macOS Builds (nightly)](https://github.com/spack/spack/workflows/macOS%20builds%20nightly/badge.svg?branch=develop)](https://github.com/spack/spack/actions?query=workflow%3A%22macOS+builds+nightly%22)
 [![codecov](https://codecov.io/gh/spack/spack/branch/develop/graph/badge.svg)](https://codecov.io/gh/spack/spack)
-[![Containers](https://github.com/spack/spack/actions/workflows/build-containers.yml/badge.svg)](https://github.com/spack/spack/actions/workflows/build-containers.yml)
 [![Read the Docs](https://readthedocs.org/projects/spack/badge/?version=latest)](https://spack.readthedocs.io)
-[![Code style: black](https://img.shields.io/badge/code%20style-black-000000.svg)](https://github.com/psf/black)
 [![Slack](https://slack.spack.io/badge.svg)](https://slack.spack.io)
 
 Spack is a multi-platform package manager that builds and installs
@@ -27,7 +26,7 @@ for examples and highlights.
 To install spack and your first package, make sure you have Python.
 Then:
 
-    $ git clone -c feature.manyFiles=true https://github.com/spack/spack.git
+    $ git clone https://github.com/spack/spack.git
     $ cd spack/bin
     $ ./spack install zlib
 
@@ -37,8 +36,6 @@ Documentation
 [**Full documentation**](https://spack.readthedocs.io/) is available, or
 run `spack help` or `spack help --all`.
 
-For a cheat sheet on Spack syntax, run `spack help --spec`.
-
 Tutorial
 ----------------
 
@@ -62,7 +59,6 @@ Resources:
 
 * **Slack workspace**: [spackpm.slack.com](https://spackpm.slack.com).
   To get an invitation, visit [slack.spack.io](https://slack.spack.io).
-* [**Github Discussions**](https://github.com/spack/spack/discussions): not just for discussions, also Q&A.
 * **Mailing list**: [groups.google.com/d/forum/spack](https://groups.google.com/d/forum/spack)
 * **Twitter**: [@spackpm](https://twitter.com/spackpm). Be sure to
   `@mention` us!
@@ -126,9 +122,6 @@ If you are referencing Spack in a publication, please cite the following paper:
    [**The Spack Package Manager: Bringing Order to HPC Software Chaos**](https://www.computer.org/csdl/proceedings/sc/2015/3723/00/2807623.pdf).
    In *Supercomputing 2015 (SC’15)*, Austin, Texas, November 15-20 2015. LLNL-CONF-669890.
 
-On GitHub, you can copy this citation in APA or BibTeX format via the "Cite this repository"
-button. Or, see the comments in `CITATION.cff` for the raw BibTeX.
-
 License
 ----------------
 

SECURITY.md

@@ -1,25 +0,0 @@
-# Security Policy
-
-## Supported Versions
-
-We provide security updates for the following releases.
-For more on Spack's release structure, see
-[`README.md`](https://github.com/spack/spack#releases).
-
-
-| Version | Supported          |
-| ------- | ------------------ |
-| develop | :white_check_mark: |
-| 0.19.x  | :white_check_mark: |
-| 0.18.x  | :white_check_mark: |
-
-## Reporting a Vulnerability
-
-To report a vulnerability or other security
-issue, email maintainers@spack.io.
-
-You can expect to hear back within two days.
-If your security issue is accepted, we will do
-our best to release a fix within a week. If
-fixing the issue will take longer than this,
-we will discuss timeline options with you.

bin/haspywin.py

@@ -1,18 +0,0 @@
-# Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
-# Spack Project Developers. See the top-level COPYRIGHT file for details.
-#
-# SPDX-License-Identifier: (Apache-2.0 OR MIT)
-import subprocess
-import sys
-
-
-def getpywin():
-    try:
-        import win32con  # noqa: F401
-    except ImportError:
-        subprocess.check_call([sys.executable, "-m", "pip", "-q", "install", "--upgrade", "pip"])
-        subprocess.check_call([sys.executable, "-m", "pip", "-q", "install", "pywin32"])
-
-
-if __name__ == "__main__":
-    getpywin()

bin/spack

@@ -1,7 +1,7 @@
 #!/bin/sh
 # -*- python -*-
 #
-# Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+# Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
 # Spack Project Developers. See the top-level COPYRIGHT file for details.
 #
 # SPDX-License-Identifier: (Apache-2.0 OR MIT)
@@ -28,16 +28,15 @@ exit 1
 from __future__ import print_function
 
 import os
-import os.path
 import sys
 
 min_python3 = (3, 5)
 
-if sys.version_info[:2] < (2, 7) or (
+if sys.version_info[:2] < (2, 6) or (
     sys.version_info[:2] >= (3, 0) and sys.version_info[:2] < min_python3
 ):
     v_info = sys.version_info[:3]
-    msg = "Spack requires Python 2.7 or %d.%d or higher " % min_python3
+    msg = "Spack requires Python 2.6, 2.7 or %d.%d or higher " % min_python3
     msg += "You are running spack with Python %d.%d.%d." % v_info
     sys.exit(msg)
 
@@ -49,8 +48,30 @@ spack_prefix = os.path.dirname(os.path.dirname(spack_file))
 spack_lib_path = os.path.join(spack_prefix, "lib", "spack")
 sys.path.insert(0, spack_lib_path)
 
-from spack_installable.main import main  # noqa: E402
+# Add external libs
+spack_external_libs = os.path.join(spack_lib_path, "external")
+
+if sys.version_info[:2] <= (2, 7):
+    sys.path.insert(0, os.path.join(spack_external_libs, "py2"))
+if sys.version_info[:2] == (2, 6):
+    sys.path.insert(0, os.path.join(spack_external_libs, "py26"))
+
+sys.path.insert(0, spack_external_libs)
+
+# Here we delete ruamel.yaml in case it has been already imported from site
+# (see #9206 for a broader description of the issue).
+#
+# Briefly: ruamel.yaml produces a .pth file when installed with pip that
+# makes the site installed package the preferred one, even though sys.path
+# is modified to point to another version of ruamel.yaml.
+if "ruamel.yaml" in sys.modules:
+    del sys.modules["ruamel.yaml"]
+
+if "ruamel" in sys.modules:
+    del sys.modules["ruamel"]
+
+import spack.main  # noqa
 
 # Once we've set up the system path, run the spack main method
 if __name__ == "__main__":
-    sys.exit(main())
+    sys.exit(spack.main.main())

bin/spack-python

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+# Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
 # Spack Project Developers. See the top-level COPYRIGHT file for details.
 #
 # SPDX-License-Identifier: (Apache-2.0 OR MIT)

bin/spack-tmpconfig

@@ -1,95 +0,0 @@
-#!/bin/bash
-set -euo pipefail
-[[ -n "${TMPCONFIG_DEBUG:=}" ]] && set -x
-DIR="$(cd -P "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
-mkdir -p "${XDG_RUNTIME_DIR:=/tmp}/spack-tests"
-export TMPDIR="${XDG_RUNTIME_DIR}"
-export TMP_DIR="$(mktemp -d -t spack-test-XXXXX)"
-clean_up() {
-    [[ -n "$TMPCONFIG_DEBUG" ]] && printf "cleaning up: $TMP_DIR\n"
-    rm -rf "$TMP_DIR"
-}
-trap clean_up EXIT
-trap clean_up ERR
-
-[[ -n "$TMPCONFIG_DEBUG" ]] && printf "Redirecting TMP_DIR and spack directories to $TMP_DIR\n"
-
-export BOOTSTRAP="${SPACK_USER_CACHE_PATH:=$HOME/.spack}/bootstrap"
-export SPACK_USER_CACHE_PATH="$TMP_DIR/user_cache"
-mkdir -p "$SPACK_USER_CACHE_PATH"
-
-private_bootstrap="$SPACK_USER_CACHE_PATH/bootstrap"
-use_spack=''
-use_bwrap=''
-# argument handling
-while (($# >= 1)) ; do
-    case "$1" in
-        -b) # privatize bootstrap too, useful for CI but not always cheap
-            shift
-            export BOOTSTRAP="$private_bootstrap"
-            ;;
-        -B) # use specified bootstrap dir
-            export BOOTSTRAP="$2"
-            shift 2
-            ;;
-        -s) # run spack directly with remaining args
-            shift
-            use_spack=1
-            ;;
-        --contain=bwrap)
-            if bwrap --help 2>&1 > /dev/null ; then
-                use_bwrap=1
-            else
-                echo Bubblewrap containment requested, but no bwrap command found
-                exit 1
-            fi
-            shift
-            ;;
-        --)
-            shift
-            break
-            ;;
-        *)
-            break
-            ;;
-    esac
-done
-typeset -a CMD
-if [[ -n "$use_spack" ]] ; then
-    CMD=("$DIR/spack" "$@")
-else
-    CMD=("$@")
-fi
-
-mkdir -p "$BOOTSTRAP"
-
-export SPACK_SYSTEM_CONFIG_PATH="$TMP_DIR/sys_conf"
-export SPACK_USER_CONFIG_PATH="$TMP_DIR/user_conf"
-mkdir -p "$SPACK_USER_CONFIG_PATH"
-cat >"$SPACK_USER_CONFIG_PATH/config.yaml" <<EOF
-config:
-  install_tree:
-    root: $TMP_DIR/install
-  misc_cache: $$user_cache_path/cache
-  source_cache: $$user_cache_path/source
-EOF
-cat >"$SPACK_USER_CONFIG_PATH/bootstrap.yaml" <<EOF
-bootstrap:
-  root: $BOOTSTRAP
-EOF
-
-if [[ -n "$use_bwrap" ]] ; then
-    CMD=(
-        bwrap
-        --dev-bind / /
-        --ro-bind "$DIR/.." "$DIR/.." # do not touch spack root
-        --ro-bind $HOME/.spack $HOME/.spack # do not touch user config/cache dir
-        --bind "$TMP_DIR" "$TMP_DIR"
-        --bind "$BOOTSTRAP" "$BOOTSTRAP"
-        --die-with-parent
-        "${CMD[@]}"
-    )
-fi
-
-(( ${TMPCONFIG_DEBUG:=0} > 1)) && echo "Running: ${CMD[@]}"
-"${CMD[@]}"

bin/spack.bat

@@ -1,223 +0,0 @@
-:: Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
-:: Spack Project Developers. See the top-level COPYRIGHT file for details.
-::
-:: SPDX-License-Identifier: (Apache-2.0 OR MIT)
-::#######################################################################
-::
-:: This file is part of Spack and sets up the spack environment for batch,
-:: This includes environment modules and lmod support,
-:: and it also puts spack in your path. The script also checks that at least
-:: module support exists, and provides suggestions if it doesn't. Source
-:: it like this:
-::
-::    . /path/to/spack/install/spack_cmd.bat
-::
-@echo off
-
-set spack=%SPACK_ROOT%\bin\spack
-
-::#######################################################################
-:: This is a wrapper around the spack command that forwards calls to
-:: 'spack load' and 'spack unload' to shell functions.  This in turn
-:: allows them to be used to invoke environment modules functions.
-::
-:: 'spack load' is smarter than just 'load' because it converts its
-:: arguments into a unique Spack spec that is then passed to module
-:: commands.  This allows the user to use packages without knowing all
-:: their installation details.
-::
-:: e.g., rather than requiring a full spec for libelf, the user can type:
-::
-::     spack load libelf
-::
-:: This will first find the available libelf module file and use a
-:: matching one.  If there are two versions of libelf, the user would
-:: need to be more specific, e.g.:
-::
-::     spack load libelf@0.8.13
-::
-:: This is very similar to how regular spack commands work and it
-:: avoids the need to come up with a user-friendly naming scheme for
-:: spack module files.
-::#######################################################################
-
-:_sp_shell_wrapper
-set "_sp_flags="
-set "_sp_args="
-set "_sp_subcommand="
-setlocal enabledelayedexpansion
-:: commands have the form '[flags] [subcommand] [args]'
-:: flags will always start with '-', e.g. --help or -V
-:: subcommands will never start with '-'
-:: everything after the subcommand is an arg
-for %%x in (%*) do (
-    set t="%%~x"
-    if "!t:~0,1!" == "-" (
-        if defined _sp_subcommand (
-            :: We already have a subcommand, processing args now
-            set "_sp_args=!_sp_args! !t!"
-        ) else (
-            set "_sp_flags=!_sp_flags! !t!"
-            shift
-        )
-    ) else if not defined _sp_subcommand (
-        set "_sp_subcommand=!t!"
-        shift
-    ) else (
-        set "_sp_args=!_sp_args! !t!"
-        shift
-    )
-)
-
-:: --help, -h and -V flags don't require further output parsing.
-:: If we encounter, execute and exit
-if defined _sp_flags (
-    if NOT "%_sp_flags%"=="%_sp_flags:-h=%" (
-        python "%spack%" %_sp_flags%
-        exit /B 0
-    ) else if NOT "%_sp_flags%"=="%_sp_flags:--help=%" (
-        python "%spack%" %_sp_flags%
-        exit /B 0
-    ) else if NOT "%_sp_flags%"=="%_sp_flags:-V=%" (
-        python "%spack%" %_sp_flags%
-        exit /B 0
-    )
-)
-:: pass parsed variables outside of local scope. Need to do
-:: this because delayedexpansion can only be set by setlocal
-echo %_sp_flags%>flags
-echo %_sp_args%>args
-echo %_sp_subcommand%>subcmd
-endlocal
-set /p _sp_subcommand=<subcmd
-set /p _sp_flags=<flags
-set /p _sp_args=<args
-set str_subcommand=%_sp_subcommand:"='%
-set str_flags=%_sp_flags:"='%
-set str_args=%_sp_args:"='%
-if "%str_subcommand%"=="ECHO is off." (set "_sp_subcommand=")
-if "%str_flags%"=="ECHO is off." (set "_sp_flags=")
-if "%str_args%"=="ECHO is off." (set "_sp_args=")
-del subcmd
-del flags
-del args
-
-:: Filter out some commands. For any others, just run the command.
-if "%_sp_subcommand%" == "cd" (
-    goto :case_cd
-) else if "%_sp_subcommand%" == "env" (
-    goto :case_env
-) else if "%_sp_subcommand%" == "load" (
-    goto :case_load
-) else if "%_sp_subcommand%" == "unload" (
-    goto :case_load
-) else (
-    goto :default_case
-)
-
-::#######################################################################
-
-:case_cd
-:: Check for --help or -h
-:: TODO: This is not exactly the same as setup-env.
-:: In setup-env, '--help' or '-h' must follow the cd
-:: Here, they may be anywhere in the args
-if defined _sp_args (
-    if NOT "%_sp_args%"=="%_sp_args:--help=%" (
-        python "%spack%" cd -h
-        goto :end_switch
-    ) else if NOT "%_sp_args%"=="%_sp_args:-h=%" (
-        python "%spack%" cd -h
-        goto :end_switch
-    )
-)
-
-for /F "tokens=* USEBACKQ" %%F in (
-  `python "%spack%" location %_sp_args%`) do (
-    set "LOC=%%F"
-)
-for %%Z in ("%LOC%") do if EXIST %%~sZ\NUL (cd /d "%LOC%")
-goto :end_switch
-
-:case_env
-:: If no args or args contain --bat or -h/--help: just execute.
-if NOT defined _sp_args (
-    goto :default_case
-)else if NOT "%_sp_args%"=="%_sp_args:--help=%" (
-    goto :default_case
-) else if NOT "%_sp_args%"=="%_sp_args: -h=%" (
-    goto :default_case
-) else if NOT "%_sp_args%"=="%_sp_args:--bat=%" (
-    goto :default_case
-) else if NOT "%_sp_args%"=="%_sp_args:deactivate=%" (
-    for /f "tokens=* USEBACKQ" %%I in (
-        `call python "%spack%" %_sp_flags% env deactivate --bat %_sp_args:deactivate=%`
-    ) do %%I
-) else if NOT "%_sp_args%"=="%_sp_args:activate=%" (
-    for /f "tokens=* USEBACKQ" %%I in (
-        `call python "%spack%" %_sp_flags% env activate --bat %_sp_args:activate=%`
-    ) do %%I
-) else (
-    goto :default_case
-)
-goto :end_switch
-
-:case_load
-:: If args contain --sh, --csh, or -h/--help: just execute.
-if defined _sp_args (
-    if NOT "%_sp_args%"=="%_sp_args:--help=%" (
-        goto :default_case
-    ) else if NOT "%_sp_args%"=="%_sp_args: -h=%" (
-        goto :default_case
-    ) else if NOT "%_sp_args%"=="%_sp_args:--bat=%" (
-        goto :default_case
-    )
-)
-
-for /f "tokens=* USEBACKQ" %%I in (
-    `python "%spack%" %_sp_flags% %_sp_subcommand% --bat %_sp_args%`) do %%I
-)
-goto :end_switch
-
-:case_unload
-goto :case_load
-
-:default_case
-python "%spack%" %_sp_flags% %_sp_subcommand% %_sp_args%
-goto :end_switch
-
-:end_switch
-exit /B %ERRORLEVEL%
-
-
-::########################################################################
-:: Prepends directories to path, if they exist.
-::      pathadd /path/to/dir            # add to PATH
-:: or   pathadd OTHERPATH /path/to/dir  # add to OTHERPATH
-::########################################################################
-
-:_spack_pathadd
-set "_pa_varname=PATH"
-set "_pa_new_path=%~1"
-if NOT "%~2" == "" (
-    set "_pa_varname=%~1"
-    set "_pa_new_path=%~2"
-    )
-set "_pa_oldvalue=%_pa_varname%"
-for %%Z in ("%_pa_new_path%") do if EXIST %%~sZ\NUL (
-    if defined %_pa_oldvalue% (
-        set "_pa_varname=%_pa_new_path%:%_pa_oldvalue%"
-    ) else (
-        set "_pa_varname=%_pa_new_path%"
-    )
-)
-exit /b 0
-
-:: set module system roots
-:_sp_multi_pathadd 
-for %%I in (%~2) do (
-    for %%Z in (%_sp_compatible_sys_types%) do (
-        :pathadd "%~1" "%%I\%%Z"
-    )
-)
-exit /B %ERRORLEVEL%

bin/spack_cmd.bat

@@ -1,72 +0,0 @@
-@ECHO OFF
-setlocal EnableDelayedExpansion
-:: (c) 2021 Lawrence Livermore National Laboratory
-:: To use this file independently of Spack's installer, execute this script in its directory, or add the
-:: associated bin directory to your PATH. Invoke to launch Spack Shell.
-::
-:: source_dir/spack/bin/spack_cmd.bat
-::
-pushd %~dp0..
-set SPACK_ROOT=%CD%
-pushd %CD%\..
-set spackinstdir=%CD%
-popd
-
-
-:: Check if Python is on the PATH
-if not defined python_pf_ver (
-(for /f "delims=" %%F in ('where python.exe') do (
-                                                    set "python_pf_ver=%%F"
-                                                    goto :found_python
-                                                  ) ) 2> NUL
-)
-:found_python
-if not defined python_pf_ver (
-    :: If not, look for Python from the Spack installer
-    :get_builtin
-    (for /f "tokens=*" %%g in ('dir /b /a:d "!spackinstdir!\Python*"') do (
-        set "python_ver=%%g")) 2> NUL
-
-    if not defined python_ver (
-        echo Python was not found on your system.
-        echo Please install Python or add Python to your PATH.
-    ) else (
-        set "py_path=!spackinstdir!\!python_ver!"
-        set "py_exe=!py_path!\python.exe"
-    )
-    goto :exitpoint
-) else (
-    :: Python is already on the path
-    set "py_exe=!python_pf_ver!"
-    (for /F "tokens=* USEBACKQ" %%F in (
-        `"!py_exe!" --version`) do (set "output=%%F")) 2>NUL
-    if not "!output:Microsoft Store=!"=="!output!" goto :get_builtin
-    goto :exitpoint
-)
-:exitpoint
-
-set "PATH=%SPACK_ROOT%\bin\;%PATH%"
-if defined py_path (
-    set "PATH=%py_path%;%PATH%"
-)
-
-if defined py_exe (
-    "%py_exe%" "%SPACK_ROOT%\bin\haspywin.py"
-    "%py_exe%" "%SPACK_ROOT%\bin\spack" external find python >NUL
-)
-
-set "EDITOR=notepad"
-
-DOSKEY spacktivate=spack env activate $*
-
-@echo **********************************************************************
-@echo ** Spack Package Manager
-@echo **********************************************************************
-
-IF "%1"=="" GOTO CONTINUE
-set
-GOTO:EOF
-
-:continue
-set PROMPT=[spack] %PROMPT%
-%comspec% /k

bin/spack_pwsh.ps1

@@ -1,10 +0,0 @@
-# Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
-# Spack Project Developers. See the top-level COPYRIGHT file for details.
-#
-# SPDX-License-Identifier: (Apache-2.0 OR MIT)
-
-$Env:SPACK_PS1_PATH="$PSScriptRoot\..\share\spack\setup-env.ps1"
-& (Get-Process -Id $pid).Path -NoExit {
-     . $Env:SPACK_PS1_PATH ; 
-    Push-Location $ENV:SPACK_ROOT
- }

etc/spack/defaults/bootstrap.yaml

@@ -1,23 +0,0 @@
-bootstrap:
-  # If set to false Spack will not bootstrap missing software,
-  # but will instead raise an error.
-  enable: true
-  # Root directory for bootstrapping work. The software bootstrapped
-  # by Spack is installed in a "store" subfolder of this root directory
-  root: $user_cache_path/bootstrap
-  # Methods that can be used to bootstrap software. Each method may or
-  # may not be able to bootstrap all the software that Spack needs,
-  # depending on its type.
-  sources:
-  - name: 'github-actions-v0.4'
-    metadata: $spack/share/spack/bootstrap/github-actions-v0.4
-  - name: 'github-actions-v0.3'
-    metadata: $spack/share/spack/bootstrap/github-actions-v0.3
-  - name: 'spack-install'
-    metadata: $spack/share/spack/bootstrap/spack-install
-  trusted:
-    # By default we trust bootstrapping from sources and from binaries
-    # produced on Github via the workflow
-    github-actions-v0.4: true
-    github-actions-v0.3: true
-    spack-install: true

etc/spack/defaults/concretizer.yaml

@@ -1,36 +0,0 @@
-# -------------------------------------------------------------------------
-# This is the default spack configuration file.
-#
-# Settings here are versioned with Spack and are intended to provide
-# sensible defaults out of the box. Spack maintainers should edit this
-# file to keep it current.
-#
-# Users can override these settings by editing
-# `$SPACK_ROOT/etc/spack/concretizer.yaml`, `~/.spack/concretizer.yaml`,
-# or by adding a `concretizer:` section to an environment.
-# -------------------------------------------------------------------------
-concretizer:
-  # Whether to consider installed packages or packages from buildcaches when
-  # concretizing specs. If `true`, we'll try to use as many installs/binaries
-  # as possible, rather than building. If `false`, we'll always give you a fresh
-  # concretization.
-  reuse: true
-  # Options that tune which targets are considered for concretization. The
-  # concretization process is very sensitive to the number targets, and the time
-  # needed to reach a solution increases noticeably with the number of targets
-  # considered.
-  targets:
-    # Determine whether we want to target specific or generic microarchitectures.
-    # An example of the first kind might be for instance "skylake" or "bulldozer",
-    # while generic microarchitectures are for instance "aarch64" or "x86_64_v4".
-    granularity: microarchitectures
-    # If "false" allow targets that are incompatible with the current host (for
-    # instance concretize with target "icelake" while running on "haswell").
-    # If "true" only allow targets that are compatible with the host.
-    host_compatible: true
-  # When "true" concretize root specs of environments together, so that each unique
-  # package in an environment corresponds to one concrete spec. This ensures
-  # environments can always be activated. When "false" perform concretization separately
-  # on each root spec, allowing different versions and variants of the same package in
-  # an environment.
-  unify: true

etc/spack/defaults/config.yaml

@@ -33,9 +33,6 @@ config:
   template_dirs:
     - $spack/share/spack/templates
 
-  # Directory where licenses should be located
-  license_dir: $spack/etc/spack/licenses
-
   # Temporary locations Spack can try to use for builds.
   #
   # Recommended options are given below.
@@ -45,8 +42,8 @@ config:
   # (i.e., ``$TMP` or ``$TMPDIR``).
   #
   # Another option that prevents conflicts and potential permission issues is
-  # to specify `$user_cache_path/stage`, which ensures each user builds in their
-  # home directory.
+  # to specify `~/.spack/stage`, which ensures each user builds in their home
+  # directory.
   #
   # A more traditional path uses the value of `$spack/var/spack/stage`, which
   # builds directly inside Spack's instance without staging them in a
@@ -63,13 +60,13 @@ config:
   # identifies Spack staging to avoid accidentally wiping out non-Spack work.
   build_stage:
     - $tempdir/$user/spack-stage
-    - $user_cache_path/stage
+    - ~/.spack/stage
   # - $spack/var/spack/stage
 
   # Directory in which to run tests and store test results.
   # Tests will be stored in directories named by date/time and package
   # name/hash.
-  test_stage: $user_cache_path/test
+  test_stage: ~/.spack/test
 
   # Cache directory for already downloaded source tarballs and archived
   # repositories. This can be purged with `spack clean --downloads`.
@@ -78,7 +75,7 @@ config:
 
   # Cache directory for miscellaneous files, like the package index.
   # This can be purged with `spack clean --misc-cache`
-  misc_cache: $user_cache_path/cache
+  misc_cache: ~/.spack/cache
 
 
   # Timeout in seconds used for downloading sources etc. This only applies
@@ -137,10 +134,6 @@ config:
   # enabling locks.
   locks: true
 
-  # The default url fetch method to use.
-  # If set to 'curl', Spack will require curl on the user's system
-  # If set to 'urllib', Spack will use python built-in libs to fetch
-  url_fetch_method: urllib
 
   # The maximum number of jobs to use for the build system (e.g. `make`), when
   # the -j flag is not given on the command line. Defaults to 16 when not set.
@@ -158,18 +151,16 @@ config:
 
   # The concretization algorithm to use in Spack. Options are:
   #
-  #   'clingo': Uses a logic solver under the hood to solve DAGs with full
-  #       backtracking and optimization for user preferences. Spack will
-  #       try to bootstrap the logic solver, if not already available.
-  #
   #   'original': Spack's original greedy, fixed-point concretizer. This
   #       algorithm can make decisions too early and will not backtrack
-  #       sufficiently for many specs. This will soon be deprecated in
-  #       favor of clingo.
+  #       sufficiently for many specs.
   #
-  # See `concretizer.yaml` for more settings you can fine-tune when
-  # using clingo.
-  concretizer: clingo
+  #   'clingo': Uses a logic solver under the hood to solve DAGs with full
+  #       backtracking and optimization for user preferences.
+  #
+  # 'clingo' currently requires the clingo ASP solver to be installed and
+  # built with python bindings. 'original' is built in.
+  concretizer: original
 
 
   # How long to wait to lock the Spack installation database. This lock is used
@@ -187,31 +178,12 @@ config:
   package_lock_timeout: null
 
 
-  # Control how shared libraries are located at runtime on Linux. See the
-  # the Spack documentation for details.
-  shared_linking:
-    # Spack automatically embeds runtime search paths in ELF binaries for their
-    # dependencies. Their type can either be "rpath" or "runpath". For glibc, rpath is
-    # inherited and has precedence over LD_LIBRARY_PATH; runpath is not inherited
-    # and of lower precedence. DO NOT MIX these within the same install tree.
-    type: rpath
-
-
-    # (Experimental) Embed absolute paths of dependent libraries directly in ELF
-    # binaries to avoid runtime search. This can improve startup time of
-    # executables with many dependencies, in particular on slow filesystems.
-    bind: false
+  # Control whether Spack embeds RPATH or RUNPATH attributes in ELF binaries.
+  # Has no effect on macOS. DO NOT MIX these within the same install tree.
+  # See the Spack documentation for details.
+  shared_linking: 'rpath'
 
 
   # Set to 'false' to allow installation on filesystems that doesn't allow setgid bit
   # manipulation by unprivileged user (e.g. AFS)
   allow_sgid: true
-
-  # Whether to set the terminal title to display status information during
-  # building and installing packages. This gives information about Spack's
-  # current progress as well as the current and total number of packages.
-  terminal_title: false
-
-  # Number of seconds a buildcache's index.json is cached locally before probing
-  # for updates, within a single Spack invocation. Defaults to 10 minutes.
-  binary_index_ttl: 600

etc/spack/defaults/cray/modules.yaml

@@ -13,4 +13,9 @@
 # Per-user settings (overrides default and site settings):
 #   ~/.spack/modules.yaml
 # -------------------------------------------------------------------------
-modules: {}
+modules:
+  prefix_inspections:
+    lib:
+      - LD_LIBRARY_PATH
+    lib64:
+      - LD_LIBRARY_PATH

etc/spack/defaults/darwin/modules.yaml

@@ -15,7 +15,7 @@
 # -------------------------------------------------------------------------
 modules:
   prefix_inspections:
-    ./lib:
+    lib:
       - DYLD_FALLBACK_LIBRARY_PATH
-    ./lib64:
+    lib64:
       - DYLD_FALLBACK_LIBRARY_PATH

etc/spack/defaults/linux/modules.yaml

@@ -13,4 +13,9 @@
 # Per-user settings (overrides default and site settings):
 #   ~/.spack/modules.yaml
 # -------------------------------------------------------------------------
-modules: {}
+modules:
+  prefix_inspections:
+    lib:
+      - LD_LIBRARY_PATH
+    lib64:
+      - LD_LIBRARY_PATH

etc/spack/defaults/modules.yaml

@@ -14,43 +14,39 @@
 #   ~/.spack/modules.yaml
 # -------------------------------------------------------------------------
 modules:
-  # This maps paths in the package install prefix to environment variables
-  # they should be added to. For example, <prefix>/bin should be in PATH.
+  # Paths to check when creating modules for all module sets
   prefix_inspections:
-    ./bin:
+    bin:
       - PATH
-    ./man:
+    man:
       - MANPATH
-    ./share/man:
+    share/man:
       - MANPATH
-    ./share/aclocal:
+    share/aclocal:
       - ACLOCAL_PATH
-    ./lib/pkgconfig:
+    lib/pkgconfig:
       - PKG_CONFIG_PATH
-    ./lib64/pkgconfig:
+    lib64/pkgconfig:
       - PKG_CONFIG_PATH
-    ./share/pkgconfig:
+    share/pkgconfig:
       - PKG_CONFIG_PATH
-    ./:
+    '':
       - CMAKE_PREFIX_PATH
 
   # These are configurations for the module set named "default"
   default:
+    # These values are defaulted in the code. They are not defaulted here so
+    # that we can enable backwards compatibility with the old syntax more
+    # easily (old value is in the config yaml, config:module_roots)
     # Where to install modules
-    roots:
-     tcl:    $spack/share/spack/modules
-     lmod:   $spack/share/spack/lmod
+    # roots:
+    #  tcl:    $spack/share/spack/modules
+    #  lmod:   $spack/share/spack/lmod
     # What type of modules to use
     enable:
       - tcl
 
-    tcl:
-      all:
-        autoload: none
-
     # Default configurations if lmod is enabled
     lmod:
-      all:
-        autoload: direct
       hierarchy:
         - mpi

etc/spack/defaults/packages.yaml

@@ -25,20 +25,16 @@ packages:
       fftw-api: [fftw, amdfftw]
       flame: [libflame, amdlibflame]
       fuse: [libfuse]
-      gl: [glx, osmesa]
+      gl: [mesa+opengl, mesa18, opengl]
       glu: [mesa-glu, openglu]
-      golang: [go, gcc]
-      go-external-or-gccgo-bootstrap: [go-bootstrap, gcc]
+      glx: [mesa+glx, mesa18+glx, opengl]
+      golang: [gcc]
       iconv: [libiconv]
       ipp: [intel-ipp]
       java: [openjdk, jdk, ibm-java]
       jpeg: [libjpeg-turbo, libjpeg]
       lapack: [openblas, amdlibflame]
-      libglx: [mesa+glx, mesa18+glx]
-      libllvm: [llvm]
-      libosmesa: [mesa+osmesa, mesa18+osmesa]
-      lua-lang: [lua, lua-luajit-openresty, lua-luajit]
-      luajit: [lua-luajit-openresty, lua-luajit]
+      lua-lang: [lua, lua-luajit]
       mariadb-client: [mariadb-c-client, mariadb]
       mkl: [intel-mkl]
       mpe: [mpe2]
@@ -46,7 +42,7 @@ packages:
       mysql-client: [mysql, mariadb-c-client]
       opencl: [pocl]
       onedal: [intel-oneapi-dal]
-      pbs: [openpbs, torque]
+      osmesa: [mesa+osmesa, mesa18+osmesa]
       pil: [py-pillow]
       pkgconfig: [pkgconf, pkg-config]
       rpc: [libtirpc]

etc/spack/defaults/windows/config.yaml

@@ -1,5 +0,0 @@
-config:
-  locks: false
-  concretizer: clingo
-  build_stage::
-    - '$spack/.staging'

lib/spack/docs/Makefile

@@ -2,7 +2,7 @@
 #
 
 # You can set these variables from the command line.
-SPHINXOPTS    = -W --keep-going
+SPHINXOPTS    = -W
 SPHINXBUILD   = sphinx-build
 PAPER         =
 BUILDDIR      = _build

lib/spack/docs/_spack_root

@@ -0,0 +1 @@
+../../..

lib/spack/docs/analyze.rst

@@ -1,4 +1,4 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
@@ -59,7 +59,7 @@ are available:
     install_files            : install file listing read from install_manifest.json
     environment_variables    : environment variables parsed from spack-build-env.txt
     config_args              : config args loaded from spack-configure-args.txt
-    libabigail               : Application Binary Interface (ABI) features for objects
+    abigail                  : Application Binary Interface (ABI) features for objects
 
 
 In the above, the first three are fairly simple - parsing metadata files from

lib/spack/docs/basic_usage.rst

@@ -1,4 +1,4 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
@@ -31,13 +31,13 @@ colorized output with a flag
 
 .. code-block:: console
 
-    $ spack --color always find | less -R
+    $ spack --color always | less -R
 
 or an environment variable
 
 .. code-block:: console
 
-   $ SPACK_COLOR=always spack find | less -R
+   $ SPACK_COLOR=always spack | less -R
 
 --------------------------
 Listing available packages
@@ -85,7 +85,7 @@ All packages whose names or descriptions contain documentation:
 To get more information on a particular package from `spack list`, use
 `spack info`.  Just supply the name of a package:
 
-.. command-output:: spack info --all mpich
+.. command-output:: spack info mpich
 
 Most of the information is self-explanatory.  The *safe versions* are
 versions that Spack knows the checksum for, and it will use the
@@ -188,37 +188,6 @@ configuration a **spec**.  In the commands above, ``mpileaks`` and
 ``mpileaks@3.0.4`` are both valid *specs*.  We'll talk more about how
 you can use them to customize an installation in :ref:`sec-specs`.
 
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Reusing installed dependencies
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-By default, when you run ``spack install``, Spack tries hard to reuse existing installations
-as dependencies, either from a local store or from remote buildcaches if configured.
-This minimizes unwanted rebuilds of common dependencies, in particular if
-you update Spack frequently.
-
-In case you want the latest versions and configurations to be installed instead,
-you can add the ``--fresh`` option:
-
-.. code-block:: console
-
-   $ spack install --fresh mpich
-
-Reusing installations in this mode is "accidental", and happening only if
-there's a match between existing installations and what Spack would have installed
-anyhow.
-
-You can use the ``spack spec -I mpich`` command to see what
-will be reused and what will be built before you install.
-
-You can configure Spack to use the ``--fresh`` behavior by default in
-``concretizer.yaml``:
-
-.. code-block:: yaml
-
-   concretizer:
-     reuse: false
-
 .. _cmd-spack-uninstall:
 
 ^^^^^^^^^^^^^^^^^^^
@@ -726,136 +695,6 @@ structured the way you want:
     }
 
 
-^^^^^^^^^^^^^^
-``spack diff``
-^^^^^^^^^^^^^^
-
-It's often the case that you have two versions of a spec that you need to
-disambiguate. Let's say that we've installed two variants of zlib, one with
-and one without the optimize variant:
-
-.. code-block:: console
-
-   $ spack install zlib
-   $ spack install zlib -optimize
-
-When we do ``spack find`` we see the two versions.
-
-.. code-block:: console
-
-    $ spack find zlib
-    ==> 2 installed packages
-    -- linux-ubuntu20.04-skylake / gcc@9.3.0 ------------------------
-    zlib@1.2.11  zlib@1.2.11
-
-
-Let's now say that we want to uninstall zlib. We run the command, and hit a problem
-real quickly since we have two!
-
-.. code-block:: console
-
-    $ spack uninstall zlib
-    ==> Error: zlib matches multiple packages:
-
-        -- linux-ubuntu20.04-skylake / gcc@9.3.0 ------------------------
-        efzjziy zlib@1.2.11  sl7m27m zlib@1.2.11
-
-    ==> Error: You can either:
-        a) use a more specific spec, or
-        b) specify the spec by its hash (e.g. `spack uninstall /hash`), or
-        c) use `spack uninstall --all` to uninstall ALL matching specs.
-
-Oh no! We can see from the above that we have two different versions of zlib installed,
-and the only difference between the two is the hash. This is a good use case for
-``spack diff``, which can easily show us the "diff" or set difference
-between properties for two packages. Let's try it out.
-Since the only difference we see in the ``spack find`` view is the hash, let's use
-``spack diff`` to look for more detail. We will provide the two hashes:
-
-.. code-block:: console
-
-    $ spack diff /efzjziy /sl7m27m
-    ==> Warning: This interface is subject to change.
-
-    --- zlib@1.2.11efzjziyc3dmb5h5u5azsthgbgog5mj7g
-    +++ zlib@1.2.11sl7m27mzkbejtkrajigj3a3m37ygv4u2
-    @@ variant_value @@
-    -  zlib optimize False
-    +  zlib optimize True
-
-
-The output is colored, and written in the style of a git diff. This means that you
-can copy and paste it into a GitHub markdown as a code block with language "diff"
-and it will render nicely! Here is an example:
-
-.. code-block:: md
-
-    ```diff
-    --- zlib@1.2.11/efzjziyc3dmb5h5u5azsthgbgog5mj7g
-    +++ zlib@1.2.11/sl7m27mzkbejtkrajigj3a3m37ygv4u2
-    @@ variant_value @@
-    -  zlib optimize False
-    +  zlib optimize True
-    ```
-
-Awesome! Now let's read the diff. It tells us that our first zlib was built with ``~optimize``
-(``False``) and the second was built with ``+optimize`` (``True``). You can't see it in the docs
-here, but the output above is also colored based on the content being an addition (+) or
-subtraction (-).
-
-This is a small example, but you will be able to see differences for any attributes on the
-installation spec. Running ``spack diff A B`` means we'll see which spec attributes are on
-``B`` but not on ``A`` (green) and which are on ``A`` but not on ``B`` (red). Here is another
-example with an additional difference type, ``version``:
-
-.. code-block:: console
-
-    $ spack diff python@2.7.8 python@3.8.11
-    ==> Warning: This interface is subject to change.
-
-    --- python@2.7.8/tsxdi6gl4lihp25qrm4d6nys3nypufbf
-    +++ python@3.8.11/yjtseru4nbpllbaxb46q7wfkyxbuvzxx
-    @@ variant_value @@
-    -  python patches a8c52415a8b03c0e5f28b5d52ae498f7a7e602007db2b9554df28cd5685839b8
-    +  python patches 0d98e93189bc278fbc37a50ed7f183bd8aaf249a8e1670a465f0db6bb4f8cf87
-    @@ version @@
-    -  openssl 1.0.2u
-    +  openssl 1.1.1k
-    -  python 2.7.8
-    +  python 3.8.11
-
-Let's say that we were only interested in one kind of attribute above, ``version``.
-We can ask the command to only output this attribute.  To do this, you'd add
-the ``--attribute`` for attribute parameter, which defaults to all. Here is how you
-would filter to show just versions:
-
-.. code-block:: console
-
-    $ spack diff --attribute version python@2.7.8 python@3.8.11
-    ==> Warning: This interface is subject to change.
-
-    --- python@2.7.8/tsxdi6gl4lihp25qrm4d6nys3nypufbf
-    +++ python@3.8.11/yjtseru4nbpllbaxb46q7wfkyxbuvzxx
-    @@ version @@
-    -  openssl 1.0.2u
-    +  openssl 1.1.1k
-    -  python 2.7.8
-    +  python 3.8.11
-
-And you can add as many attributes as you'd like with multiple `--attribute` arguments
-(for lots of attributes, you can use ``-a`` for short). Finally, if you want to view the
-data as json (and possibly pipe into an output file) just add ``--json``:
-
-
-.. code-block:: console
-
-    $ spack diff --json python@2.7.8 python@3.8.11
-
-
-This data will be much longer because along with the differences for ``A`` vs. ``B`` and
-``B`` vs. ``A``, the JSON output also showsthe intersection.
-
-
 ------------------------
 Using installed packages
 ------------------------
@@ -896,12 +735,11 @@ your path:
    $ which mpicc
    ~/spack/opt/linux-debian7-x86_64/gcc@4.4.7/mpich@3.0.4/bin/mpicc
 
-These commands will add appropriate directories to your ``PATH``
-and ``MANPATH`` according to the
+These commands will add appropriate directories to your ``PATH``,
+``MANPATH``, ``CPATH``, and ``LD_LIBRARY_PATH`` according to the
 :ref:`prefix inspections <customize-env-modifications>` defined in your
-modules configuration.
-When you no longer want to use a package, you can type unload or
-unuse similarly:
+modules configuration.  When you no longer want to use a package, you
+can type unload or unuse similarly:
 
 .. code-block:: console
 
@@ -942,22 +780,6 @@ first ``libelf`` above, you would run:
 
    $ spack load /qmm4kso
 
-To see which packages that you have loaded to your enviornment you would
-use ``spack find --loaded``.
-
-.. code-block:: console
-
-    $ spack find --loaded
-    ==> 2 installed packages
-    -- linux-debian7 / gcc@4.4.7 ------------------------------------
-    libelf@0.8.13
-
-    -- linux-debian7 / intel@15.0.0 ---------------------------------
-    libelf@0.8.13
-
-You can also use ``spack load --list`` to get the same output, but it
-does not have the full set of query options that ``spack find`` offers.
-
 We'll learn more about Spack's spec syntax in the next section.
 
 
@@ -998,15 +820,11 @@ More formally, a spec consists of the following pieces:
 * ``%`` Optional compiler specifier, with an optional compiler version
   (``gcc`` or ``gcc@4.7.3``)
 * ``+`` or ``-`` or ``~`` Optional variant specifiers (``+debug``,
-  ``-qt``, or ``~qt``) for boolean variants. Use ``++`` or ``--`` or
-  ``~~`` to propagate variants through the dependencies (``++debug``,
-  ``--qt``, or ``~~qt``).
+  ``-qt``, or ``~qt``) for boolean variants
 * ``name=<value>`` Optional variant specifiers that are not restricted to
-  boolean variants. Use ``name==<value>`` to propagate variant through the
-  dependencies.
+  boolean variants
 * ``name=<value>`` Optional compiler flag specifiers. Valid flag names are
   ``cflags``, ``cxxflags``, ``fflags``, ``cppflags``, ``ldflags``, and ``ldlibs``.
-  Use ``name==<value>`` to propagate compiler flags through the dependencies.
 * ``target=<value> os=<value>`` Optional architecture specifier
   (``target=haswell os=CNL10``)
 * ``^`` Dependency specs (``^callpath@1.1``)
@@ -1097,8 +915,6 @@ could depend on ``mpich@1.2:`` if it can only build with version
 
 Below are more details about the specifiers that you can add to specs.
 
-.. _version-specifier:
-
 ^^^^^^^^^^^^^^^^^
 Version specifier
 ^^^^^^^^^^^^^^^^^
@@ -1114,37 +930,6 @@ set of arbitrary versions, such as ``@1.0,1.5,1.7`` (``1.0``, ``1.5``,
 or ``1.7``).  When you supply such a specifier to ``spack install``,
 it constrains the set of versions that Spack will install.
 
-For packages with a ``git`` attribute, ``git`` references
-may be specified instead of a numerical version i.e. branches, tags
-and commits. Spack will stage and build based off the ``git``
-reference provided.  Acceptable syntaxes for this are:
-
-.. code-block:: sh
-
-    # branches and tags
-   foo@git.develop # use the develop branch
-   foo@git.0.19 # use the 0.19 tag
-
-    # commit hashes
-   foo@abcdef1234abcdef1234abcdef1234abcdef1234    # 40 character hashes are automatically treated as git commits
-   foo@git.abcdef1234abcdef1234abcdef1234abcdef1234
-
-Spack versions from git reference either have an associated version supplied by the user,
-or infer a relationship to known versions from the structure of the git repository. If an
-associated version is supplied by the user, Spack treats the git version as equivalent to that
-version for all version comparisons in the package logic (e.g. ``depends_on('foo', when='@1.5')``).
-
-The associated version can be assigned with ``[git ref]=[version]`` syntax, with the caveat that the specified version is known to Spack from either the package definition, or in the configuration preferences (i.e. ``packages.yaml``).
-
-.. code-block:: sh
-
-   foo@git.my_ref=3.2 # use the my_ref tag or branch, but treat it as version 3.2 for version comparisons
-   foo@git.abcdef1234abcdef1234abcdef1234abcdef1234=develop # use the given commit, but treat it as develop for version comparisons
-
-If an associated version is not supplied then the tags in the git repo are used to determine
-the most recent previous version known to Spack. Details about how versions are compared
-and how Spack determines if one version is less than another are discussed in the developer guide.
-
 If the version spec is not provided, then Spack will choose one
 according to policies set for the particular spack installation.  If
 the spec is ambiguous, i.e. it could match multiple versions, Spack
@@ -1230,23 +1015,6 @@ variants using the backwards compatibility syntax and uses only ``~``
 for disabled boolean variants.  The ``-`` and spaces on the command
 line are provided for convenience and legibility.
 
-Spack allows variants to propagate their value to the package's
-dependency by using ``++``, ``--``, and ``~~`` for boolean variants.
-For example, for a ``debug`` variant:
-
-.. code-block:: sh
-
-    mpileaks ++debug   # enabled debug will be propagated to dependencies
-    mpileaks +debug    # only mpileaks will have debug enabled
-
-To propagate the value of non-boolean variants Spack uses ``name==value``.
-For example, for the ``stackstart`` variant:
-
-.. code-block:: sh
-
-    mpileaks stackstart=4    # variant will be propagated to dependencies
-    mpileaks stackstart==4   # only mpileaks will have this variant value
-
 ^^^^^^^^^^^^^^
 Compiler Flags
 ^^^^^^^^^^^^^^
@@ -1254,15 +1022,10 @@ Compiler Flags
 Compiler flags are specified using the same syntax as non-boolean variants,
 but fulfill a different purpose. While the function of a variant is set by
 the package, compiler flags are used by the compiler wrappers to inject
-flags into the compile line of the build. Additionally, compiler flags can
-be inherited by dependencies by using ``==``.
-``spack install libdwarf cppflags=="-g"`` will install both libdwarf and
-libelf with the ``-g`` flag injected into their compile line.
-
-.. note::
-
-   versions of spack prior to 0.19.0 will propagate compiler flags using
-   the ``=`` syntax.
+flags into the compile line of the build. Additionally, compiler flags are
+inherited by dependencies. ``spack install libdwarf cppflags="-g"`` will
+install both libdwarf and libelf with the ``-g`` flag injected into their
+compile line.
 
 Notice that the value of the compiler flags must be quoted if it
 contains any spaces. Any of ``cppflags=-O3``, ``cppflags="-O3"``,
@@ -1342,7 +1105,7 @@ Normally users don't have to bother specifying the architecture if they
 are installing software for their current host, as in that case the
 values will be detected automatically.  If you need fine-grained control
 over which packages use which targets (or over *all* packages' default
-target), see :ref:`package-preferences`.
+target), see :ref:`concretization-preferences`.
 
 .. admonition:: Cray machines
 
@@ -1464,7 +1227,7 @@ built.
 You can see what virtual packages a particular package provides by
 getting info on it:
 
-.. command-output:: spack info --virtuals mpich
+.. command-output:: spack info mpich
 
 Spack is unique in that its virtual packages can be versioned, just
 like regular packages.  A particular version of a package may provide
@@ -1672,13 +1435,9 @@ own install prefix.  However, certain packages are typically installed
 `Python <https://www.python.org>`_ packages are typically installed in the
 ``$prefix/lib/python-2.7/site-packages`` directory.
 
-In Spack, installation prefixes are immutable, so this type of installation
-is not directly supported. However, it is possible to create views that
-allow you to merge install prefixes of multiple packages into a single new prefix.
-Views are a convenient way to get a more traditional filesystem structure.
-Using *extensions*, you can ensure that Python packages always share the
-same prefix in the view as Python itself. Suppose you have
-Python installed like so:
+Spack has support for this type of installation as well.  In Spack,
+a package that can live inside the prefix of another package is called
+an *extension*.  Suppose you have Python installed like so:
 
 .. code-block:: console
 
@@ -1716,6 +1475,8 @@ You can find extensions for your Python installation like this:
    py-ipython@2.3.1     py-pygments@2.0.1   py-setuptools@11.3.1
    py-matplotlib@1.4.2  py-pyparsing@2.0.3  py-six@1.9.0
 
+   ==> None activated.
+
 The extensions are a subset of what's returned by ``spack list``, and
 they are packages like any other.  They are installed into their own
 prefixes, and you can see this with ``spack find --paths``:
@@ -1743,72 +1504,31 @@ directly when you run ``python``:
    ImportError: No module named numpy
    >>>
 
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Using Extensions in Environments
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^
+Using Extensions
+^^^^^^^^^^^^^^^^
 
-The recommended way of working with extensions such as ``py-numpy``
-above is through :ref:`Environments <environments>`. For example,
-the following creates an environment in the current working directory
-with a filesystem view in the ``./view`` directory:
-
-.. code-block:: console
-
-   $ spack env create --with-view view --dir .
-   $ spack -e . add py-numpy
-   $ spack -e . concretize
-   $ spack -e . install
-
-We recommend environments for two reasons. Firstly, environments
-can be activated (requires :ref:`shell-support`):
-
-.. code-block:: console
-
-   $ spack env activate .
-
-which sets all the right environment variables such as ``PATH`` and
-``PYTHONPATH``. This ensures that
-
-.. code-block:: console
-
-   $ python
-   >>> import numpy
-
-works. Secondly, even without shell support, the view ensures
-that Python can locate its extensions:
-
-.. code-block:: console
-
-   $ ./view/bin/python
-   >>> import numpy
-
-See :ref:`environments` for a more in-depth description of Spack
-environments and customizations to views.
-
-^^^^^^^^^^^^^^^^^^^^
-Using ``spack load``
-^^^^^^^^^^^^^^^^^^^^
-
-A more traditional way of using Spack and extensions is ``spack load``
-(requires :ref:`shell-support`). This will add the extension to ``PYTHONPATH``
-in your current shell, and Python itself will be available in the ``PATH``:
+There are four ways to get ``numpy`` working in Python.  The first is
+to use :ref:`shell-support`.  You can simply ``load`` the extension,
+and it will be added to the ``PYTHONPATH`` in your current shell:
 
 .. code-block:: console
 
+   $ spack load python
    $ spack load py-numpy
-   $ python
-   >>> import numpy
 
-The loaded packages can be checked using ``spack find --loaded``
+Now ``import numpy`` will succeed for as long as you keep your current
+session open.
 
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 Loading Extensions via Modules
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
-Apart from ``spack env activate`` and ``spack load``, you can load numpy
-through your environment modules (using ``environment-modules`` or
-``lmod``). This will also add the extension to the ``PYTHONPATH`` in
-your current shell.
+Instead of using Spack's environment modification capabilities through
+the ``spack load`` command, you can load numpy through your
+environment modules (using ``environment-modules`` or ``lmod``). This
+will also add the extension to the ``PYTHONPATH`` in your current
+shell.
 
 .. code-block:: console
 
@@ -1818,6 +1538,130 @@ If you do not know the name of the specific numpy module you wish to
 load, you can use the ``spack module tcl|lmod loads`` command to get
 the name of the module from the Spack spec.
 
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+Activating Extensions in a View
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Another way to use extensions is to create a view, which merges the
+python installation along with the extensions into a single prefix.
+See :ref:`filesystem-views` for a more in-depth description of views and
+:ref:`cmd-spack-view` for usage of the ``spack view`` command.
+
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+Activating Extensions Globally
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+As an alternative to creating a merged prefix with Python and its extensions,
+and prior to support for views, Spack has provided a means to install the
+extension into the Spack installation prefix for the extendee. This has
+typically been useful since extendable packages typically search their own
+installation path for addons by default.
+
+Global activations are performed with the ``spack activate`` command:
+
+.. _cmd-spack-activate:
+
+^^^^^^^^^^^^^^^^^^
+``spack activate``
+^^^^^^^^^^^^^^^^^^
+
+.. code-block:: console
+
+   $ spack activate py-numpy
+   ==> Activated extension py-setuptools@11.3.1%gcc@4.4.7 arch=linux-debian7-x86_64-3c74eb69 for python@2.7.8%gcc@4.4.7.
+   ==> Activated extension py-nose@1.3.4%gcc@4.4.7 arch=linux-debian7-x86_64-5f70f816 for python@2.7.8%gcc@4.4.7.
+   ==> Activated extension py-numpy@1.9.1%gcc@4.4.7 arch=linux-debian7-x86_64-66733244 for python@2.7.8%gcc@4.4.7.
+
+Several things have happened here.  The user requested that
+``py-numpy`` be activated in the ``python`` installation it was built
+with.  Spack knows that ``py-numpy`` depends on ``py-nose`` and
+``py-setuptools``, so it activated those packages first.  Finally,
+once all dependencies were activated in the ``python`` installation,
+``py-numpy`` was activated as well.
+
+If we run ``spack extensions`` again, we now see the three new
+packages listed as activated:
+
+.. code-block:: console
+
+   $ spack extensions python
+   ==> python@2.7.8%gcc@4.4.7  arch=linux-debian7-x86_64-703c7a96
+   ==> 36 extensions:
+   geos          py-ipython     py-pexpect    py-pyside            py-sip
+   py-basemap    py-libxml2     py-pil        py-pytz              py-six
+   py-biopython  py-mako        py-pmw        py-rpy2              py-sympy
+   py-cython     py-matplotlib  py-pychecker  py-scientificpython  py-virtualenv
+   py-dateutil   py-mpi4py      py-pygments   py-scikit-learn
+   py-epydoc     py-mx          py-pylint     py-scipy
+   py-gnuplot    py-nose        py-pyparsing  py-setuptools
+   py-h5py       py-numpy       py-pyqt       py-shiboken
+
+   ==> 12 installed:
+   -- linux-debian7-x86_64 / gcc@4.4.7 --------------------------------
+   py-dateutil@2.4.0    py-nose@1.3.4       py-pyside@1.2.2
+   py-dateutil@2.4.0    py-numpy@1.9.1      py-pytz@2014.10
+   py-ipython@2.3.1     py-pygments@2.0.1   py-setuptools@11.3.1
+   py-matplotlib@1.4.2  py-pyparsing@2.0.3  py-six@1.9.0
+
+   ==> 3 currently activated:
+   -- linux-debian7-x86_64 / gcc@4.4.7 --------------------------------
+   py-nose@1.3.4  py-numpy@1.9.1  py-setuptools@11.3.1
+
+Now, when a user runs python, ``numpy`` will be available for import
+*without* the user having to explicitly load it.  ``python@2.7.8`` now
+acts like a system Python installation with ``numpy`` installed inside
+of it.
+
+Spack accomplishes this by symbolically linking the *entire* prefix of
+the ``py-numpy`` package into the prefix of the ``python`` package.  To the
+python interpreter, it looks like ``numpy`` is installed in the
+``site-packages`` directory.
+
+The only limitation of global activation is that you can only have a *single*
+version of an extension activated at a time.  This is because multiple
+versions of the same extension would conflict if symbolically linked
+into the same prefix.  Users who want a different version of a package
+can still get it by using environment modules or views, but they will have to
+explicitly load their preferred version.
+
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+``spack activate --force``
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+If, for some reason, you want to activate a package *without* its
+dependencies, you can use ``spack activate --force``:
+
+.. code-block:: console
+
+   $ spack activate --force py-numpy
+   ==> Activated extension py-numpy@1.9.1%gcc@4.4.7 arch=linux-debian7-x86_64-66733244 for python@2.7.8%gcc@4.4.7.
+
+.. _cmd-spack-deactivate:
+
+^^^^^^^^^^^^^^^^^^^^
+``spack deactivate``
+^^^^^^^^^^^^^^^^^^^^
+
+We've seen how activating an extension can be used to set up a default
+version of a Python module.  Obviously, you may want to change that at
+some point.  ``spack deactivate`` is the command for this.  There are
+several variants:
+
+* ``spack deactivate <extension>`` will deactivate a single
+  extension.  If another activated extension depends on this one,
+  Spack will warn you and exit with an error.
+* ``spack deactivate --force <extension>`` deactivates an extension
+  regardless of packages that depend on it.
+* ``spack deactivate --all <extension>`` deactivates an extension and
+  all of its dependencies.  Use ``--force`` to disregard dependents.
+* ``spack deactivate --all <extendee>`` deactivates *all* activated
+  extensions of a package.  For example, to deactivate *all* python
+  extensions, use:
+
+  .. code-block:: console
+
+     $ spack deactivate --all python
+
 -----------------------
 Filesystem requirements
 -----------------------

lib/spack/docs/binary_caches.rst

@@ -1,4 +1,4 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
@@ -50,13 +50,6 @@ build cache files for the "ninja" spec:
 Note that the targeted spec must already be installed. Once you have a build cache,
 you can add it as a mirror, discussed next.
 
-.. warning::
-
-   Spack improved the format used for binary caches in v0.18. The entire v0.18 series
-   will be able to verify and install binary caches both in the new and in the old format.
-   Support for using the old format is expected to end in v0.19, so we advise users to
-   recreate relevant buildcaches using Spack v0.18 or higher.
-
 ---------------------------------------
 Finding or installing build cache files
 ---------------------------------------

lib/spack/docs/bootstrapping.rst

@@ -1,173 +0,0 @@
-.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
-   Spack Project Developers. See the top-level COPYRIGHT file for details.
-
-   SPDX-License-Identifier: (Apache-2.0 OR MIT)
-
-.. _bootstrapping:
-
-=============
-Bootstrapping
-=============
-
-In the :ref:`Getting started <getting_started>` Section we already mentioned that
-Spack can bootstrap some of its dependencies, including ``clingo``. In fact, there
-is an entire command dedicated to the management of every aspect of bootstrapping:
-
-.. command-output:: spack bootstrap --help
-
-Spack is configured to bootstrap its dependencies lazily by default; i.e. the first time they are needed and
-can't be found. You can readily check if any prerequisite for using Spack is missing by running:
-
-.. code-block:: console
-
-   % spack bootstrap status
-   Spack v0.19.0 - python@3.8
-
-   [FAIL] Core Functionalities
-     [B] MISSING "clingo": required to concretize specs
-
-   [FAIL] Binary packages
-     [B] MISSING "gpg2": required to sign/verify buildcaches
-
-
-   Spack will take care of bootstrapping any missing dependency marked as [B]. Dependencies marked as [-] are instead required to be found on the system.
-
-In the case of the output shown above Spack detected that both ``clingo`` and ``gnupg``
-are missing and it's giving detailed information on why they are needed and whether
-they can be bootstrapped. Running a command that concretize a spec, like:
-
-.. code-block:: console
-
-   % spack solve zlib
-   ==> Bootstrapping clingo from pre-built binaries
-   ==> Fetching https://mirror.spack.io/bootstrap/github-actions/v0.1/build_cache/darwin-catalina-x86_64/apple-clang-12.0.0/clingo-bootstrap-spack/darwin-catalina-x86_64-apple-clang-12.0.0-clingo-bootstrap-spack-p5on7i4hejl775ezndzfdkhvwra3hatn.spack
-   ==> Installing "clingo-bootstrap@spack%apple-clang@12.0.0~docs~ipo+python build_type=Release arch=darwin-catalina-x86_64" from a buildcache
-   [ ... ]
-
-triggers the bootstrapping of clingo from pre-built binaries as expected.
-
-Users can also bootstrap all the dependencies needed by Spack in a single command, which
-might be useful to setup containers or other similar environments:
-
-.. code-block:: console
-
-   $ spack bootstrap now
-   ==> Bootstrapping clingo from pre-built binaries
-   ==> Fetching https://mirror.spack.io/bootstrap/github-actions/v0.3/build_cache/linux-centos7-x86_64-gcc-10.2.1-clingo-bootstrap-spack-shqedxgvjnhiwdcdrvjhbd73jaevv7wt.spec.json
-   ==> Fetching https://mirror.spack.io/bootstrap/github-actions/v0.3/build_cache/linux-centos7-x86_64/gcc-10.2.1/clingo-bootstrap-spack/linux-centos7-x86_64-gcc-10.2.1-clingo-bootstrap-spack-shqedxgvjnhiwdcdrvjhbd73jaevv7wt.spack
-   ==> Installing "clingo-bootstrap@spack%gcc@10.2.1~docs~ipo+python+static_libstdcpp build_type=Release arch=linux-centos7-x86_64" from a buildcache
-   ==> Bootstrapping patchelf from pre-built binaries
-   ==> Fetching https://mirror.spack.io/bootstrap/github-actions/v0.3/build_cache/linux-centos7-x86_64-gcc-10.2.1-patchelf-0.15.0-htk62k7efo2z22kh6kmhaselru7bfkuc.spec.json
-   ==> Fetching https://mirror.spack.io/bootstrap/github-actions/v0.3/build_cache/linux-centos7-x86_64/gcc-10.2.1/patchelf-0.15.0/linux-centos7-x86_64-gcc-10.2.1-patchelf-0.15.0-htk62k7efo2z22kh6kmhaselru7bfkuc.spack
-   ==> Installing "patchelf@0.15.0%gcc@10.2.1 ldflags="-static-libstdc++ -static-libgcc"  arch=linux-centos7-x86_64" from a buildcache
-
------------------------
-The Bootstrapping store
------------------------
-
-The software installed for bootstrapping purposes is deployed in a separate store.
-Its location can be checked with the following command:
-
-.. code-block:: console
-
-   % spack bootstrap root
-
-It can also be changed with the same command by just specifying the newly desired path:
-
-.. code-block:: console
-
-   % spack bootstrap root /opt/spack/bootstrap
-
-You can check what is installed in the bootstrapping store at any time using:
-
-.. code-block:: console
-
-   % spack find -b
-   ==> Showing internal bootstrap store at "/Users/spack/.spack/bootstrap/store"
-   ==> 11 installed packages
-   -- darwin-catalina-x86_64 / apple-clang@12.0.0 ------------------
-   clingo-bootstrap@spack  libassuan@2.5.5  libgpg-error@1.42  libksba@1.5.1  pinentry@1.1.1  zlib@1.2.11
-   gnupg@2.3.1             libgcrypt@1.9.3  libiconv@1.16      npth@1.6       python@3.8
-
-In case it is needed you can remove all the software in the current bootstrapping store with:
-
-.. code-block:: console
-
-   % spack clean -b
-   ==> Removing bootstrapped software and configuration in "/Users/spack/.spack/bootstrap"
-
-   % spack find -b
-   ==> Showing internal bootstrap store at "/Users/spack/.spack/bootstrap/store"
-   ==> 0 installed packages
-
---------------------------------------------
-Enabling and disabling bootstrapping methods
---------------------------------------------
-
-Bootstrapping is always performed by trying the methods listed by:
-
-.. command-output:: spack bootstrap list
-
-in the order they appear, from top to bottom. By default Spack is
-configured to try first bootstrapping from pre-built binaries and to
-fall-back to bootstrapping from sources if that failed.
-
-If need be, you can disable bootstrapping altogether by running:
-
-.. code-block:: console
-
-   % spack bootstrap disable
-
-in which case it's your responsibility to ensure Spack runs in an
-environment where all its prerequisites are installed. You can
-also configure Spack to skip certain bootstrapping methods by disabling
-them specifically:
-
-.. code-block:: console
-
-   % spack bootstrap disable github-actions
-   ==> "github-actions" is now disabled and will not be used for bootstrapping
-
-tells Spack to skip trying to bootstrap from binaries. To add the "github-actions" method back you can:
-
-.. code-block:: console
-
-   % spack bootstrap enable github-actions
-
-There is also an option to reset the bootstrapping configuration to Spack's defaults:
-
-.. code-block:: console
-
-   % spack bootstrap reset
-   ==> Bootstrapping configuration is being reset to Spack's defaults. Current configuration will be lost.
-   Do you want to continue? [Y/n]
-   %
-
-----------------------------------------
-Creating a mirror for air-gapped systems
-----------------------------------------
-
-Spack's default configuration for bootstrapping relies on the user having
-access to the internet, either to fetch pre-compiled binaries or source tarballs.
-Sometimes though Spack is deployed on air-gapped systems where such access is denied.
-
-To help with similar situations Spack has a command that recreates, in a local folder
-of choice, a mirror containing the source tarballs and/or binary packages needed for
-bootstrapping.
-
-.. code-block:: console
-
-   % spack bootstrap mirror --binary-packages /opt/bootstrap
-   ==> Adding "clingo-bootstrap@spack+python %apple-clang target=x86_64" and dependencies to the mirror at /opt/bootstrap/local-mirror
-   ==> Adding "gnupg@2.3: %apple-clang target=x86_64" and dependencies to the mirror at /opt/bootstrap/local-mirror
-   ==> Adding "patchelf@0.13.1:0.13.99 %apple-clang target=x86_64" and dependencies to the mirror at /opt/bootstrap/local-mirror
-   ==> Adding binary packages from "https://github.com/alalazo/spack-bootstrap-mirrors/releases/download/v0.1-rc.2/bootstrap-buildcache.tar.gz" to the mirror at /opt/bootstrap/local-mirror
-
-   To register the mirror on the platform where it's supposed to be used run the following command(s):
-     % spack bootstrap add --trust local-sources /opt/bootstrap/metadata/sources
-     % spack bootstrap add --trust local-binaries /opt/bootstrap/metadata/binaries
-
-
-This command needs to be run on a machine with internet access and the resulting folder
-has to be moved over to the air-gapped system. Once the local sources are added using the
-commands suggested at the prompt, they can be used to bootstrap Spack.

lib/spack/docs/build_settings.rst

@@ -1,13 +1,13 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
 
 .. _build-settings:
 
-================================
-Package Settings (packages.yaml)
-================================
+===================
+Build Customization
+===================
 
 Spack allows you to customize how your software is built through the
 ``packages.yaml`` file.  Using it, you can make Spack prefer particular
@@ -49,8 +49,9 @@ packages rather than building its own packages. This may be desirable
 if machines ship with system packages, such as a customized MPI
 that should be used instead of Spack building its own MPI.
 
-External packages are configured through the ``packages.yaml`` file.
-Here's an example of an external configuration:
+External packages are configured through the ``packages.yaml`` file found
+in a Spack installation's ``etc/spack/`` or a user's ``~/.spack/``
+directory. Here's an example of an external configuration:
 
 .. code-block:: yaml
 
@@ -96,14 +97,11 @@ Each package version and compiler listed in an external should
 have entries in Spack's packages and compiler configuration, even
 though the package and compiler may not ever be built.
 
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Prevent packages from being built from sources
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Adding an external spec in ``packages.yaml`` allows Spack to use an external location,
-but it does not prevent Spack from building packages from sources. In the above example,
-Spack might choose for many valid reasons to start building and linking with the
-latest version of OpenMPI rather than continue using the pre-installed OpenMPI versions.
+The packages configuration can tell Spack to use an external location
+for certain package versions, but it does not restrict Spack to using
+external packages.  In the above example, since newer versions of OpenMPI
+are available, Spack will choose to start building and linking with the
+latest version rather than continue using the pre-installed OpenMPI versions.
 
 To prevent this, the ``packages.yaml`` configuration also allows packages
 to be flagged as non-buildable.  The previous example could be modified to
@@ -123,15 +121,9 @@ be:
        buildable: False
 
 The addition of the ``buildable`` flag tells Spack that it should never build
-its own version of OpenMPI from sources, and it will instead always rely on a pre-built
-OpenMPI.
-
-.. note::
-
-   If ``concretizer:reuse`` is on (see :ref:`concretizer-options` for more information on that flag)
-   pre-built specs include specs already available from a local store, an upstream store, a registered
-   buildcache or specs marked as externals in ``packages.yaml``. If ``concretizer:reuse`` is off, only
-   external specs in ``packages.yaml`` are included in the list of pre-built specs.
+its own version of OpenMPI, and it will instead always rely on a pre-built
+OpenMPI.  Similar to ``paths``, ``buildable`` is specified as a property under
+a package name.
 
 If an external module is specified as not buildable, then Spack will load the
 external module into the build environment which can be used for linking.
@@ -140,10 +132,6 @@ The ``buildable`` does not need to be paired with external packages.
 It could also be used alone to forbid packages that may be
 buggy or otherwise undesirable.
 
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Non-buildable virtual packages
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
 Virtual packages in Spack can also be specified as not buildable, and
 external implementations can be provided. In the example above,
 OpenMPI is configured as not buildable, but Spack will often prefer
@@ -165,37 +153,21 @@ but more conveniently:
        - spec: "openmpi@1.6.5%intel@10.1 arch=linux-debian7-x86_64"
          prefix: /opt/openmpi-1.6.5-intel
 
-Spack can then use any of the listed external implementations of MPI
-to satisfy a dependency, and will choose depending on the compiler and
-architecture.
-
-In cases where the concretizer is configured to reuse specs, and other ``mpi`` providers
-(available via stores or buildcaches) are not wanted, Spack can be configured to require
-specs matching only the available externals:
+Implementations can also be listed immediately under the virtual they provide:
 
 .. code-block:: yaml
 
    packages:
      mpi:
        buildable: False
-       require:
-       - one_of: [
-           "openmpi@1.4.3%gcc@4.4.7 arch=linux-debian7-x86_64",
-           "openmpi@1.4.3%gcc@4.4.7 arch=linux-debian7-x86_64+debug",
-           "openmpi@1.6.5%intel@10.1 arch=linux-debian7-x86_64"
-         ]
-     openmpi:
-       externals:
-       - spec: "openmpi@1.4.3%gcc@4.4.7 arch=linux-debian7-x86_64"
-         prefix: /opt/openmpi-1.4.3
-       - spec: "openmpi@1.4.3%gcc@4.4.7 arch=linux-debian7-x86_64+debug"
-         prefix: /opt/openmpi-1.4.3-debug
-       - spec: "openmpi@1.6.5%intel@10.1 arch=linux-debian7-x86_64"
-         prefix: /opt/openmpi-1.6.5-intel
+         openmpi@1.4.3%gcc@4.4.7 arch=linux-debian7-x86_64: /opt/openmpi-1.4.3
+         openmpi@1.4.3%gcc@4.4.7 arch=linux-debian7-x86_64+debug: /opt/openmpi-1.4.3-debug
+         openmpi@1.6.5%intel@10.1 arch=linux-debian7-x86_64: /opt/openmpi-1.6.5-intel
+         mpich@3.3 %clang@9.0.0 arch=linux-debian7-x86_64: /opt/mpich-3.3-intel
 
-This configuration prevents any spec using MPI and originating from stores or buildcaches to be reused,
-unless it matches the requirements under ``packages:mpi:require``. For more information on requirements see
-:ref:`package-requirements`.
+Spack can then use any of the listed external implementations of MPI
+to satisfy a dependency, and will choose depending on the compiler and
+architecture.
 
 .. _cmd-spack-external-find:
 
@@ -222,6 +194,11 @@ Specific limitations include:
 * Packages are not discoverable by default: For a package to be
   discoverable with ``spack external find``, it needs to add special
   logic. See :ref:`here <make-package-findable>` for more details.
+* The current implementation only collects and examines executable files,
+  so it is typically only useful for build/run dependencies (in some cases
+  if a library package also provides an executable, it may be possible to
+  extract a meaningful Spec by running the executable - for example the
+  compiler wrappers in MPI implementations).
 * The logic does not search through module files, it can only detect
   packages with executables defined in ``PATH``; you can help Spack locate
   externals which use module files by loading any associated modules for
@@ -232,213 +209,17 @@ Specific limitations include:
   then Spack will not add a new external entry (``spack config blame packages``
   can help locate all external entries).
 
-.. _concretizer-options:
+.. _concretization-preferences:
 
-----------------------
-Concretizer options
-----------------------
+--------------------------
+Concretization Preferences
+--------------------------
 
-``packages.yaml`` gives the concretizer preferences for specific packages,
-but you can also use ``concretizer.yaml`` to customize aspects of the
-algorithm it uses to select the dependencies you install:
-
-.. literalinclude:: _spack_root/etc/spack/defaults/concretizer.yaml
-   :language: yaml
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Reuse already installed packages
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-The ``reuse`` attribute controls whether Spack will prefer to use installed packages (``true``), or
-whether it will do a "fresh" installation and prefer the latest settings from
-``package.py`` files and ``packages.yaml`` (``false``).
-You can use:
-
-.. code-block:: console
-
-   % spack install --reuse <spec>
-
-to enable reuse for a single installation, and you can use:
-
-.. code-block:: console
-
-   spack install --fresh <spec>
-
-to do a fresh install if ``reuse`` is enabled by default.
-``reuse: true`` is the default.
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Selection of the target microarchitectures
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-The options under the ``targets`` attribute control which targets are considered during a solve.
-Currently the options in this section are only configurable from the ``concretization.yaml`` file
-and there are no corresponding command line arguments to enable them for a single solve.
-
-The ``granularity`` option can take two possible values: ``microarchitectures`` and ``generic``.
-If set to:
-
-.. code-block:: yaml
-
-   concretizer:
-     targets:
-       granularity: microarchitectures
-
-Spack will consider all the microarchitectures known to ``archspec`` to label nodes for
-compatibility. If instead the option is set to:
-
-.. code-block:: yaml
-
-   concretizer:
-     targets:
-       granularity: generic
-
-Spack will consider only generic microarchitectures. For instance, when running on an
-Haswell node, Spack will consider ``haswell`` as the best target in the former case and
-``x86_64_v3`` as the best target in the latter case.
-
-The ``host_compatible`` option is a Boolean option that determines whether or not the
-microarchitectures considered during the solve are constrained to be compatible with the
-host Spack is currently running on. For instance, if this option is set to ``true``, a
-user cannot concretize for ``target=icelake`` while running on an Haswell node.
-
-.. _package-requirements:
-
---------------------
-Package Requirements
---------------------
-
-Spack can be configured to always use certain compilers, package
-versions, and variants during concretization through package
-requirements.
-
-Package requirements are useful when you find yourself repeatedly
-specifying the same constraints on the command line, and wish that
-Spack respects these constraints whether you mention them explicitly
-or not. Another use case is specifying constraints that should apply
-to all root specs in an environment, without having to repeat the
-constraint everywhere.
-
-Apart from that, requirements config is more flexible than constraints
-on the command line, because it can specify constraints on packages
-*when they occur* as a dependency. In contrast, on the command line it
-is not possible to specify constraints on dependencies while also keeping
-those dependencies optional.
-
-The package requirements configuration is specified in ``packages.yaml``
-keyed by package name:
-
-.. code-block:: yaml
-
-   packages:
-     libfabric:
-       require: "@1.13.2"
-     openmpi:
-       require:
-       - any_of: ["~cuda", "%gcc"]
-     mpich:
-      require:
-      - one_of: ["+cuda", "+rocm"]
-
-Requirements are expressed using Spec syntax (the same as what is provided
-to ``spack install``). In the simplest case, you can specify attributes
-that you always want the package to have by providing a single spec to
-``require``; in the above example, ``libfabric`` will always build
-with version 1.13.2.
-
-You can provide a more-relaxed constraint and allow the concretizer to
-choose between a set of options using ``any_of`` or ``one_of``:
-
-* ``any_of`` is a list of specs. One of those specs must be satisfied
-  and it is also allowed for the concretized spec to match more than one.
-  In the above example, that means you could build ``openmpi+cuda%gcc``,
-  ``openmpi~cuda%clang`` or ``openmpi~cuda%gcc`` (in the last case,
-  note that both specs in the ``any_of`` for ``openmpi`` are
-  satisfied).
-* ``one_of`` is also a list of specs, and the final concretized spec
-  must match exactly one of them.  In the above example, that means
-  you could build ``mpich+cuda`` or ``mpich+rocm`` but not
-  ``mpich+cuda+rocm`` (note the current package definition for
-  ``mpich`` already includes a conflict, so this is redundant but
-  still demonstrates the concept).
-
-.. note::
-
-   For ``any_of`` and ``one_of``, the order of specs indicates a
-   preference: items that appear earlier in the list are preferred
-   (note that these preferences can be ignored in favor of others).
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Setting default requirements
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-You can also set default requirements for all packages under ``all``
-like this:
-
-.. code-block:: yaml
-
-   packages:
-     all:
-       require: '%clang'
-
-which means every spec will be required to use ``clang`` as a compiler.
-
-Note that in this case ``all`` represents a *default set of requirements* -
-if there are specific package requirements, then the default requirements
-under ``all`` are disregarded. For example, with a configuration like this:
-
-.. code-block:: yaml
-
-   packages:
-     all:
-       require: '%clang'
-     cmake:
-       require: '%gcc'
-
-Spack requires ``cmake`` to use ``gcc`` and all other nodes (including ``cmake``
-dependencies) to use ``clang``.
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Setting requirements on virtual specs
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-A requirement on a virtual spec applies whenever that virtual is present in the DAG.
-This can be useful for fixing which virtual provider you want to use:
-
-.. code-block:: yaml
-
-   packages:
-     mpi:
-       require: 'mvapich2 %gcc'
-
-With the configuration above the only allowed ``mpi`` provider is ``mvapich2 %gcc``.
-
-Requirements on the virtual spec and on the specific provider are both applied, if
-present. For instance with a configuration like:
-
-.. code-block:: yaml
-
-   packages:
-     mpi:
-       require: 'mvapich2 %gcc'
-     mvapich2:
-       require: '~cuda'
-
-you will use ``mvapich2~cuda %gcc`` as an ``mpi`` provider.
-
-.. _package-preferences:
-
--------------------
-Package Preferences
--------------------
-
-In some cases package requirements can be too strong, and package
-preferences are the better option. Package preferences do not impose
-constraints on packages for particular versions or variants values,
-they rather only set defaults -- the concretizer is free to change
-them if it must due to other constraints. Also note that package
-preferences are of lower priority than reuse of already installed
-packages.
+Spack can be configured to prefer certain compilers, package
+versions, dependencies, and variants during concretization.
+The preferred configuration can be controlled via the
+``~/.spack/packages.yaml`` file for user configurations, or the
+``etc/spack/packages.yaml`` site configuration.
 
 Here's an example ``packages.yaml`` file that sets preferred packages:
 
@@ -456,7 +237,7 @@ Here's an example ``packages.yaml`` file that sets preferred packages:
        providers:
          mpi: [mvapich2, mpich, openmpi]
 
-At a high level, this example is specifying how packages are preferably
+At a high level, this example is specifying how packages should be
 concretized.  The opencv package should prefer using GCC 4.9 and
 be built with debug options.  The gperftools package should prefer version
 2.2 over 2.4.  Every package on the system should prefer mvapich2 for
@@ -464,11 +245,13 @@ its MPI and GCC 4.4.7 (except for opencv, which overrides this by preferring GCC
 These options are used to fill in implicit defaults.  Any of them can be overwritten
 on the command line if explicitly requested.
 
-Package preferences accept the follow keys or components under
-the specific package (or ``all``) section: ``compiler``, ``variants``,
-``version``, ``providers``, and ``target``.  Each component has an
-ordered list of spec ``constraints``, with earlier entries in the
-list being preferred over later entries.
+Each ``packages.yaml`` file begins with the string ``packages:`` and
+package names are specified on the next level. The special string ``all``
+applies settings to *all* packages. Underneath each package name is one
+or more components: ``compiler``, ``variants``, ``version``,
+``providers``, and ``target``.  Each component has an ordered list of
+spec ``constraints``, with earlier entries in the list being preferred
+over later entries.
 
 Sometimes a package installation may have constraints that forbid
 the first concretization rule, in which case Spack will use the first
@@ -483,7 +266,7 @@ gcc to pgi will thus be preferred over the xlc compiler.
 
 The syntax for the ``provider`` section differs slightly from other
 concretization rules.  A provider lists a value that packages may
-``depends_on`` (e.g, MPI) and a list of rules for fulfilling that
+``depend_on`` (e.g, MPI) and a list of rules for fulfilling that
 dependency.
 
 .. _package_permissions:
@@ -534,25 +317,3 @@ directories inside the install prefix. This will ensure that even
 manually placed files within the install prefix are owned by the
 assigned group. If no group is assigned, Spack will allow the OS
 default behavior to go as expected.
-
-----------------------------
-Assigning Package Attributes
-----------------------------
-
-You can assign class-level attributes in the configuration:
-
-.. code-block:: yaml
-
-  packages:
-    mpileaks:
-      # Override existing attributes
-      url: http://www.somewhereelse.com/mpileaks-1.0.tar.gz
-      # ... or add new ones
-      x: 1
-
-Attributes set this way will be accessible to any method executed
-in the package.py file (e.g. the ``install()`` method). Values for these
-attributes may be any value parseable by yaml.
-
-These can only be applied to specific packages, not "all" or
-virtual packages.

lib/spack/docs/build_systems.rst

@@ -1,4 +1,4 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
@@ -39,7 +39,6 @@ on these ideas for each distinct build system that Spack supports:
 
    build_systems/autotoolspackage
    build_systems/cmakepackage
-   build_systems/cachedcmakepackage
    build_systems/mesonpackage
    build_systems/qmakepackage
    build_systems/sippackage
@@ -48,12 +47,10 @@ on these ideas for each distinct build system that Spack supports:
    :maxdepth: 1
    :caption: Language-specific
 
-   build_systems/luapackage
    build_systems/octavepackage
    build_systems/perlpackage
    build_systems/pythonpackage
    build_systems/rpackage
-   build_systems/racketpackage
    build_systems/rubypackage
 
 .. toctree::
@@ -62,11 +59,10 @@ on these ideas for each distinct build system that Spack supports:
 
    build_systems/bundlepackage
    build_systems/cudapackage
-   build_systems/custompackage
    build_systems/inteloneapipackage
    build_systems/intelpackage
    build_systems/rocmpackage
-   build_systems/sourceforgepackage
+   build_systems/custompackage
 
 For reference, the :py:mod:`Build System API docs <spack.build_systems>`
 provide a list of build systems and methods/attributes that can be

lib/spack/docs/build_systems/autotoolspackage.rst

@@ -1,13 +1,13 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
 
 .. _autotoolspackage:
 
----------
-Autotools
----------
+----------------
+AutotoolsPackage
+----------------
 
 Autotools is a GNU build system that provides a build-script generator.
 By running the platform-independent ``./configure`` script that comes
@@ -17,7 +17,7 @@ with the package, you can generate a platform-dependent Makefile.
 Phases
 ^^^^^^
 
-The ``AutotoolsBuilder`` and ``AutotoolsPackage`` base classes come with the following phases:
+The ``AutotoolsPackage`` base class comes with the following phases:
 
 #. ``autoreconf`` - generate the configure script
 #. ``configure`` - generate the Makefiles
@@ -112,44 +112,20 @@ phase runs:
 
 .. code-block:: console
 
-   $ autoreconf --install --verbose --force -I <aclocal-prefix>/share/aclocal
-
-In case you need to add more arguments, override ``autoreconf_extra_args``
-in your ``package.py`` on class scope like this:
-
-.. code-block:: python
-
-   autoreconf_extra_args = ["-Im4"]
+   $ libtoolize
+   $ aclocal
+   $ autoreconf --install --verbose --force
 
 All you need to do is add a few Autotools dependencies to the package.
 Most stable releases will come with a ``configure`` script, but if you
-check out a commit from the ``master`` branch, you would want to add:
+check out a commit from the ``develop`` branch, you would want to add:
 
 .. code-block:: python
 
-   depends_on('autoconf', type='build', when='@master')
-   depends_on('automake', type='build', when='@master')
-   depends_on('libtool',  type='build', when='@master')
-
-It is typically redundant to list the ``m4`` macro processor package as a
-dependency, since ``autoconf`` already depends on it.
-
-"""""""""""""""""""""""""""""""
-Using a custom autoreconf phase
-"""""""""""""""""""""""""""""""
-
-In some cases, it might be needed to replace the default implementation
-of the autoreconf phase with one running a script interpreter. In this
-example, the ``bash`` shell is used to run the ``autogen.sh`` script.
-
-.. code-block:: python
-
-   def autoreconf(self, spec, prefix):
-       which('bash')('autogen.sh')
-
-"""""""""""""""""""""""""""""""""""""""
-patching configure or Makefile.in files
-"""""""""""""""""""""""""""""""""""""""
+   depends_on('autoconf', type='build', when='@develop')
+   depends_on('automake', type='build', when='@develop')
+   depends_on('libtool',  type='build', when='@develop')
+   depends_on('m4',       type='build', when='@develop')
 
 In some cases, developers might need to distribute a patch that modifies
 one of the files used to generate ``configure`` or ``Makefile.in``.
@@ -159,57 +135,6 @@ create a new patch that directly modifies ``configure``. That way,
 Spack can use the secondary patch and additional build system
 dependencies aren't necessary.
 
-""""""""""""""""""""""""""""
-Old Autotools helper scripts
-""""""""""""""""""""""""""""
-
-Autotools based tarballs come with helper scripts such as ``config.sub`` and
-``config.guess``. It is the responsibility of the developers to keep these files
-up to date so that they run on every platform, but for very old software
-releases this is impossible. In these cases Spack can help to replace these
-files with newer ones, without having to add the heavy dependency on
-``automake``.
-
-Automatic helper script replacement is currently enabled by default on
-``ppc64le`` and ``aarch64``, as these are the known cases where old scripts fail.
-On these targets, ``AutotoolsPackage`` adds a build dependency on ``gnuconfig``,
-which is a very light-weight package with newer versions of the helper files.
-Spack then tries to run all the helper scripts it can find in the release, and
-replaces them on failure with the helper scripts from ``gnuconfig``.
-
-To opt out of this feature, use the following setting:
-
-.. code-block:: python
-
-   patch_config_files = False
-
-To enable it conditionally on different architectures, define a property and
-make the package depend on ``gnuconfig`` as a build dependency:
-
-.. code-block
-
-   depends_on('gnuconfig', when='@1.0:')
-
-   @property
-   def patch_config_files(self):
-      return self.spec.satisfies("@1.0:")
-
-.. note::
-
-    On some exotic architectures it is necessary to use system provided
-    ``config.sub`` and ``config.guess`` files. In this case, the most
-    transparent solution is to mark the ``gnuconfig`` package as external and
-    non-buildable, with a prefix set to the directory containing the files:
-
-   .. code-block:: yaml
-
-       gnuconfig:
-         buildable: false
-         externals:
-         - spec: gnuconfig@master
-           prefix: /usr/share/configure_files/
-
-
 """"""""""""""""
 force_autoreconf
 """"""""""""""""
@@ -399,47 +324,8 @@ options:
 
    --with-libfabric=</path/to/libfabric>
 
-"""""""""""""""""""""""
-The ``variant`` keyword
-"""""""""""""""""""""""
-
-When Spack variants and configure flags do not correspond one-to-one, the
-``variant`` keyword can be passed to ``with_or_without`` and
-``enable_or_disable``. For example:
-
-.. code-block:: python
-
-   variant('debug_tools', default=False)
-   config_args += self.enable_or_disable('debug-tools', variant='debug_tools')
-
-Or when one variant controls multiple flags:
-
-.. code-block:: python
-
-   variant('debug_tools', default=False)
-   config_args += self.with_or_without('memchecker', variant='debug_tools')
-   config_args += self.with_or_without('profiler', variant='debug_tools')
-
-
 """"""""""""""""""""
-Conditional variants
-""""""""""""""""""""
-
-When a variant is conditional and its condition is not met on the concrete spec, the
-``with_or_without`` and ``enable_or_disable`` methods will simply return an empty list.
-
-For example:
-
-.. code-block:: python
-
-   variant('profiler', when='@2.0:')
-   config_args += self.with_or_without('profiler')
-
-will neither add ``--with-profiler`` nor ``--without-profiler`` when the version is
-below ``2.0``.
-
-""""""""""""""""""""
-Activation overrides
+activation overrides
 """"""""""""""""""""
 
 Finally, the behavior of either ``with_or_without`` or

lib/spack/docs/build_systems/bundlepackage.rst

@@ -1,13 +1,13 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
 
 .. _bundlepackage:
 
-------
-Bundle
-------
+-------------
+BundlePackage
+-------------
 
 ``BundlePackage`` represents a set of packages that are expected to work well
 together, such as a collection of commonly used software libraries.  The

lib/spack/docs/build_systems/cachedcmakepackage.rst

@@ -1,123 +0,0 @@
-.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
-   Spack Project Developers. See the top-level COPYRIGHT file for details.
-
-   SPDX-License-Identifier: (Apache-2.0 OR MIT)
-
-.. _cachedcmakepackage:
-
-------------------
-CachedCMakePackage
-------------------
-
-The CachedCMakePackage base class is used for CMake-based workflows
-that create a CMake cache file prior to running ``cmake``. This is
-useful for packages with arguments longer than the system limit, and
-for reproducibility.
-
-The documentation for this class assumes that the user is familiar with
-the ``CMakePackage`` class from which it inherits. See the documentation
-for :ref:`CMakePackage <cmakepackage>`.
-
-^^^^^^
-Phases
-^^^^^^
-
-The ``CachedCMakePackage`` base class comes with the following phases:
-
-#. ``initconfig`` - generate the CMake cache file
-#. ``cmake`` - generate the Makefile
-#. ``build`` - build the package
-#. ``install`` - install the package
-
-By default, these phases run:
-
-.. code-block:: console
-
-   $ mkdir spack-build
-   $ cd spack-build
-   $ cat << EOF > name-arch-compiler@version.cmake
-   # Write information on compilers and dependencies
-   # includes information on mpi and cuda if applicable
-   $ cmake .. -DCMAKE_INSTALL_PREFIX=/path/to/installation/prefix -C name-arch-compiler@version.cmake
-   $ make
-   $ make test  # optional
-   $ make install
-
-The ``CachedCMakePackage`` class inherits from the ``CMakePackage``
-class, and accepts all of the same options and adds all of the same
-flags to the ``cmake`` command. Similar to the ``CMakePAckage`` class,
-you may need to add a few arguments yourself, and the
-``CachedCMakePackage`` provides the same interface to add those
-flags.
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Adding entries to the CMake cache
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-In addition to adding flags to the ``cmake`` command, you may need to
-add entries to the CMake cache in the ``initconfig`` phase. This can
-be done by overriding one of four methods:
-
-#. ``CachedCMakePackage.initconfig_compiler_entries``
-#. ``CachedCMakePackage.initconfig_mpi_entries``
-#. ``CachedCMakePackage.initconfig_hardware_entries``
-#. ``CachedCMakePackage.initconfig_package_entries``
-
-Each of these methods returns a list of CMake cache strings. The
-distinction between these methods is merely to provide a
-well-structured and legible cmake cache file -- otherwise, entries
-from each of these methods are handled identically.
-
-Spack also provides convenience methods for generating CMake cache
-entries. These methods are available at module scope in every Spack
-package. Because CMake parses boolean options, strings, and paths
-differently, there are three such methods:
-
-#. ``cmake_cache_option``
-#. ``cmake_cache_string``
-#. ``cmake_cache_path``
-
-These methods each accept three parameters -- the name of the CMake
-variable associated with the entry, the value of the entry, and an
-optional comment -- and return strings in the appropriate format to be
-returned from any of the ``initconfig*`` methods. Additionally, these
-methods may return comments beginning with the ``#`` character.
-
-A typical usage of these methods may look something like this:
-
-.. code-block:: python
-
-   def initconfig_mpi_entries(self)
-       # Get existing MPI configurations
-       entries = super(self, Foo).initconfig_mpi_entries()
-
-       # The existing MPI configurations key on whether ``mpi`` is in the spec
-       # This spec has an MPI variant, and we need to enable MPI when it is on.
-       # This hypothetical package controls MPI with the ``FOO_MPI`` option to
-       # cmake.
-       if '+mpi' in self.spec:
-           entries.append(cmake_cache_option('FOO_MPI', True, "enable mpi"))
-       else:
-           entries.append(cmake_cache_option('FOO_MPI', False, "disable mpi"))
-
-   def initconfig_package_entries(self):
-       # Package specific options
-       entries = []
-
-       entries.append('#Entries for build options')
-
-       bar_on = '+bar' in self.spec
-       entries.append(cmake_cache_option('FOO_BAR', bar_on, 'toggle bar'))
-
-       entries.append('#Entries for dependencies')
-
-       if self.spec['blas'].name == 'baz':  # baz is our blas provider
-       entries.append(cmake_cache_string('FOO_BLAS', 'baz', 'Use baz'))
-       entries.append(cmake_cache_path('BAZ_PREFIX', self.spec['baz'].prefix))
-
-^^^^^^^^^^^^^^^^^^^^^^
-External documentation
-^^^^^^^^^^^^^^^^^^^^^^
-
-For more information on CMake cache files, see:
-https://cmake.org/cmake/help/latest/manual/cmake.1.html

lib/spack/docs/build_systems/cmakepackage.rst

@@ -1,13 +1,13 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
 
 .. _cmakepackage:
 
------
-CMake
------
+------------
+CMakePackage
+------------
 
 Like Autotools, CMake is a widely-used build-script generator. Designed
 by Kitware, CMake is the most popular build system for new C, C++, and
@@ -21,7 +21,7 @@ whereas Autotools is Unix-only.
 Phases
 ^^^^^^
 
-The ``CMakeBuilder`` and ``CMakePackage`` base classes come with the following phases:
+The ``CMakePackage`` base class comes with the following phases:
 
 #. ``cmake`` - generate the Makefile
 #. ``build`` - build the package
@@ -130,8 +130,8 @@ Adding flags to cmake
 To add additional flags to the ``cmake`` call, simply override the
 ``cmake_args`` function. The following example defines values for the flags
 ``WHATEVER``, ``ENABLE_BROKEN_FEATURE``, ``DETECT_HDF5``, and ``THREADS`` with
-and without the :meth:`~spack.build_systems.cmake.CMakeBuilder.define` and
-:meth:`~spack.build_systems.cmake.CMakeBuilder.define_from_variant` helper functions:
+and without the :py:meth:`~.CMakePackage.define` and
+:py:meth:`~.CMakePackage.define_from_variant` helper functions:
 
 .. code-block:: python
 
@@ -145,99 +145,6 @@ and without the :meth:`~spack.build_systems.cmake.CMakeBuilder.define` and
 
        return args
 
-Spack supports CMake defines from conditional variants too. Whenever the condition on
-the variant is not met, ``define_from_variant()`` will simply return an empty string,
-and CMake simply ignores the empty command line argument. For example the following
-
-.. code-block:: python
-
-   variant('example', default=True, when='@2.0:')
-
-   def cmake_args(self):
-      return [self.define_from_variant('EXAMPLE', 'example')]
-
-will generate ``'cmake' '-DEXAMPLE=ON' ...`` when `@2.0: +example` is met, but will
-result in ``'cmake' '' ...`` when the spec version is below ``2.0``.
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-CMake arguments provided by Spack
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-The following default arguments are controlled by Spack:
-
-
-``CMAKE_INSTALL_PREFIX``
-------------------------
-
-Is set to the the package's install directory.
-
-
-``CMAKE_PREFIX_PATH``
----------------------
-
-CMake finds dependencies through calls to ``find_package()``, ``find_program()``,
-``find_library()``, ``find_file()``, and ``find_path()``, which use a list of search
-paths from ``CMAKE_PREFIX_PATH``. Spack sets this variable to a list of prefixes of the
-spec's transitive dependencies.
-
-For troubleshooting cases where CMake fails to find a dependency, add the
-``--debug-find`` flag to ``cmake_args``.
-
-``CMAKE_BUILD_TYPE``
---------------------
-
-Every CMake-based package accepts a ``-DCMAKE_BUILD_TYPE`` flag to
-dictate which level of optimization to use. In order to ensure
-uniformity across packages, the ``CMakePackage`` base class adds
-a variant to control this:
-
-.. code-block:: python
-
-   variant('build_type', default='RelWithDebInfo',
-           description='CMake build type',
-           values=('Debug', 'Release', 'RelWithDebInfo', 'MinSizeRel'))
-
-However, not every CMake package accepts all four of these options.
-Grep the ``CMakeLists.txt`` file to see if the default values are
-missing or replaced. For example, the
-`dealii <https://github.com/spack/spack/blob/develop/var/spack/repos/builtin/packages/dealii/package.py>`_
-package overrides the default variant with:
-
-.. code-block:: python
-
-   variant('build_type', default='DebugRelease',
-           description='The build type to build',
-           values=('Debug', 'Release', 'DebugRelease'))
-
-For more information on ``CMAKE_BUILD_TYPE``, see:
-https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html
-
-
-``CMAKE_INSTALL_RPATH`` and ``CMAKE_INSTALL_RPATH_USE_LINK_PATH=ON``
---------------------------------------------------------------------
-
-CMake uses different RPATHs during the build and after installation, so that executables
-can locate the libraries they're linked to during the build, and installed executables
-do not have RPATHs to build directories. In Spack, we have to make sure that RPATHs are
-set properly after installation.
-
-Spack sets ``CMAKE_INSTALL_RPATH`` to a list of ``<prefix>/lib`` or ``<prefix>/lib64``
-directories of the spec's link-type dependencies. Apart from that, it sets
-``-DCMAKE_INSTALL_RPATH_USE_LINK_PATH=ON``, which should add RPATHs for directories of
-linked libraries not in the directories covered by ``CMAKE_INSTALL_RPATH``.
-
-Usually it's enough to set only ``-DCMAKE_INSTALL_RPATH_USE_LINK_PATH=ON``, but the
-reason to provide both options is that packages may dynamically open shared libraries,
-which CMake cannot detect. In those cases, the RPATHs from ``CMAKE_INSTALL_RPATH`` are
-used as search paths.
-
-.. note::
-
-   Some packages provide stub libraries, which contain an interface for linking without
-   an implementation. When using such libraries, it's best to override the option
-   ``-DCMAKE_INSTALL_RPATH_USE_LINK_PATH=OFF`` in ``cmake_args``, so that stub libraries
-   are not used at runtime.
-
 
 ^^^^^^^^^^
 Generators
@@ -275,6 +182,36 @@ generators, but it should be simple to add support for alternative
 generators. For more information on CMake generators, see:
 https://cmake.org/cmake/help/latest/manual/cmake-generators.7.html
 
+^^^^^^^^^^^^^^^^
+CMAKE_BUILD_TYPE
+^^^^^^^^^^^^^^^^
+
+Every CMake-based package accepts a ``-DCMAKE_BUILD_TYPE`` flag to
+dictate which level of optimization to use. In order to ensure
+uniformity across packages, the ``CMakePackage`` base class adds
+a variant to control this:
+
+.. code-block:: python
+
+   variant('build_type', default='RelWithDebInfo',
+           description='CMake build type',
+           values=('Debug', 'Release', 'RelWithDebInfo', 'MinSizeRel'))
+
+However, not every CMake package accepts all four of these options.
+Grep the ``CMakeLists.txt`` file to see if the default values are
+missing or replaced. For example, the
+`dealii <https://github.com/spack/spack/blob/develop/var/spack/repos/builtin/packages/dealii/package.py>`_
+package overrides the default variant with:
+
+.. code-block:: python
+
+   variant('build_type', default='DebugRelease',
+           description='The build type to build',
+           values=('Debug', 'Release', 'DebugRelease'))
+
+For more information on ``CMAKE_BUILD_TYPE``, see:
+https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html
+
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 CMakeLists.txt in a sub-directory
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

lib/spack/docs/build_systems/cudapackage.rst

@@ -1,4 +1,4 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)

lib/spack/docs/build_systems/custompackage.rst

@@ -1,4 +1,4 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)

lib/spack/docs/build_systems/inteloneapipackage.rst

@@ -1,4 +1,4 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
@@ -32,7 +32,7 @@ oneAPI packages or use::
 
 For more information on a specific package, do::
 
-  spack info --all <package-name>
+  spack info <package-name>
 
 Intel no longer releases new versions of Parallel Studio, which can be
 used in Spack via the :ref:`intelpackage`. All of its components can
@@ -84,8 +84,8 @@ build ``hdf5`` with Intel oneAPI MPI do::
 
   spack install hdf5 +mpi ^intel-oneapi-mpi
 
-Using Externally Installed oneAPI Tools
-=======================================
+Using an Externally Installed oneAPI
+====================================
 
 Spack can also use oneAPI tools that are manually installed with
 `Intel Installers`_.  The procedures for configuring Spack to use
@@ -110,7 +110,7 @@ Another option is to manually add the configuration to
 Libraries
 ---------
 
-If you want Spack to use oneMKL that you have installed without Spack in
+If you want Spack to use MKL that you have installed without Spack in
 the default location, then add the following to
 ``~/.spack/packages.yaml``, adjusting the version as appropriate::
 
@@ -139,7 +139,7 @@ You can also use Spack-installed libraries. For example::
   spack load intel-oneapi-mkl
 
 Will update your environment CPATH, LIBRARY_PATH, and other
-environment variables for building an application with oneMKL.
+environment variables for building an application with MKL.
 
 More information
 ================

lib/spack/docs/build_systems/intelpackage.rst

@@ -1,4 +1,4 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
@@ -15,9 +15,6 @@ IntelPackage
 Intel packages in Spack
 ^^^^^^^^^^^^^^^^^^^^^^^^
 
-This is an earlier version of Intel software development tools and has
-now been replaced by Intel oneAPI Toolkits.
-
 Spack can install and use several software development products offered by Intel.
 Some of these are available under no-cost terms, others require a paid license.
 All share the same basic steps for configuration, installation, and, where
@@ -652,7 +649,7 @@ follow `the next section <intel-install-libs_>`_ instead.
 
    * If you specified a custom variant (for example ``+vtune``) you may want to add this as your
      preferred variant in the packages configuration for the ``intel-parallel-studio`` package
-     as described in :ref:`package-preferences`. Otherwise you will have to specify
+     as described in :ref:`concretization-preferences`. Otherwise you will have to specify
      the variant everytime ``intel-parallel-studio`` is being used as ``mkl``, ``fftw`` or ``mpi``
      implementation to avoid pulling in a different variant.
 
@@ -814,13 +811,13 @@ by one of the following means:
      $ spack install libxc@3.0.0%intel
 
 
-* Alternatively, request Intel compilers implicitly by package preferences.
+* Alternatively, request Intel compilers implicitly by concretization preferences.
   Configure the order of compilers in the appropriate ``packages.yaml`` file,
   under either an ``all:`` or client-package-specific entry, in a
   ``compiler:`` list. Consult the Spack documentation for
   `Configuring Package Preferences <https://spack-tutorial.readthedocs.io/en/latest/tutorial_configuration.html#configuring-package-preferences>`_
   and
-  :ref:`Package Preferences <package-preferences>`.
+  :ref:`Concretization Preferences <concretization-preferences>`.
 
 Example: ``etc/spack/packages.yaml`` might simply contain:
 
@@ -870,7 +867,7 @@ virtual package, in order of decreasing preference.  To learn more about the
 ``providers:`` settings, see the Spack tutorial for
 `Configuring Package Preferences <https://spack-tutorial.readthedocs.io/en/latest/tutorial_configuration.html#configuring-package-preferences>`_
 and the section
-:ref:`Package Preferences <package-preferences>`.
+:ref:`Concretization Preferences <concretization-preferences>`.
 
 Example: The following fairly minimal example for ``packages.yaml`` shows how
 to exclusively use the standalone ``intel-mkl`` package for all the linear

lib/spack/docs/build_systems/luapackage.rst

@@ -1,105 +0,0 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
-   Spack Project Developers. See the top-level COPYRIGHT file for details.
-
-   SPDX-License-Identifier: (Apache-2.0 OR MIT)
-
-.. _luapackage:
-
----
-Lua
----
-
-The ``Lua`` build-system is a helper for the common case of Lua packages that provide
-a rockspec file.  This is not meant to take a rock archive, but to build
-a source archive or repository that provides a rockspec, which should cover
-most lua packages. In the case a Lua package builds by Make rather than
-luarocks, prefer MakefilePackage.
-
-^^^^^^
-Phases
-^^^^^^
-
-The ``LuaBuilder`` and `LuaPackage`` base classes come with the following phases:
-
-#. ``unpack`` - if using a rock, unpacks the rock and moves into the source directory
-#. ``preprocess`` - adjust sources or rockspec to fix build
-#. ``install`` - install the project
-
-By default, these phases run:
-
-.. code-block:: console
-
-   # If the archive is a source rock
-   $ luarocks unpack <archive>.src.rock
-   $ # preprocess is a noop by default
-   $ luarocks make <name>.rockspec
-
-
-Any of these phases can be overridden in your package as necessary.
-
-^^^^^^^^^^^^^^^
-Important files
-^^^^^^^^^^^^^^^
-
-Packages that use the Lua/LuaRocks build system can be identified by the
-presence of a ``*.rockspec`` file in their sourcetree, or can be fetched as
-a source rock archive (``.src.rock``). This file declares things like build
-instructions and dependencies, the ``.src.rock`` also contains all code.
-
-It is common for the rockspec file to list the lua version required in
-a dependency. The LuaPackage class adds appropriate dependencies on a Lua
-implementation, but it is a good idea to specify the version required with
-a ``depends_on`` statement.  The block normally will be a table definition like
-this:
-
-.. code-block:: lua
-
-   dependencies = {
-      "lua >= 5.1",
-   }
-
-The LuaPackage class supports source repositories and archives containing
-a rockspec and directly downloading source rock files.  It *does not* support
-downloading dependencies listed inside a rockspec, and thus does not support
-directly downloading a rockspec as an archive.
-
-^^^^^^^^^^^^^^^^^^^^^^^^^
-Build system dependencies
-^^^^^^^^^^^^^^^^^^^^^^^^^
-
-All base dependencies are added by the build system, but LuaRocks is run to
-avoid downloading extra Lua dependencies during build.  If the package needs
-Lua libraries outside the standard set, they should be added as dependencies.
-
-To specify a Lua version constraint but allow all lua implementations, prefer
-to use ``depends_on("lua-lang@5.1:5.1.99")`` to express any 5.1 compatible
-version. If the package requires LuaJit rather than Lua,
-a ``depends_on("luajit")`` should be used to ensure a LuaJit distribution is
-used instead of the Lua interpreter. Alternately, if only interpreted Lua will
-work ``depends_on("lua")`` will express that.
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Passing arguments to luarocks make
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-If you need to pass any arguments to the ``luarocks make`` call, you can
-override the ``luarocks_args`` method like so:
-
-.. code-block:: python
-
-    def luarocks_args(self):
-        return ['flag1', 'flag2']
-
-One common use of this is to override warnings or flags for newer compilers, as in:
-
-.. code-block:: python
-
-    def luarocks_args(self):
-        return ["CFLAGS='-Wno-error=implicit-function-declaration'"]
-
-^^^^^^^^^^^^^^^^^^^^^^
-External documentation
-^^^^^^^^^^^^^^^^^^^^^^
-
-For more information on the LuaRocks build system, see:
-https://luarocks.org/

lib/spack/docs/build_systems/makefilepackage.rst

@@ -1,13 +1,13 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
 
 .. _makefilepackage:
 
---------
-Makefile
---------
+---------------
+MakefilePackage
+---------------
 
 The most primitive build system a package can use is a plain Makefile.
 Makefiles are simple to write for small projects, but they usually
@@ -18,7 +18,7 @@ variables.
 Phases
 ^^^^^^
 
-The ``MakefileBuilder`` and ``MakefilePackage`` base classes come with 3 phases:
+The ``MakefilePackage`` base class comes with 3 phases:
 
 #. ``edit`` - edit the Makefile
 #. ``build`` - build the project

lib/spack/docs/build_systems/mavenpackage.rst

@@ -1,13 +1,13 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
 
 .. _mavenpackage:
 
------
-Maven
------
+------------
+MavenPackage
+------------
 
 Apache Maven is a general-purpose build system that does not rely
 on Makefiles to build software. It is designed for building and
@@ -17,7 +17,7 @@ managing and Java-based project.
 Phases
 ^^^^^^
 
-The ``MavenBuilder`` and ``MavenPackage`` base classes come with the following phases:
+The ``MavenPackage`` base class comes with the following phases:
 
 #. ``build`` - compile code and package into a JAR file
 #. ``install`` - copy to installation prefix

lib/spack/docs/build_systems/mesonpackage.rst

@@ -1,13 +1,13 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
 
 .. _mesonpackage:
 
------
-Meson
------
+------------
+MesonPackage
+------------
 
 Much like Autotools and CMake, Meson is a build system.  But it is
 meant to be both fast and as user friendly as possible.  GNOME's goal
@@ -17,7 +17,7 @@ is to port modules to use the Meson build system.
 Phases
 ^^^^^^
 
-The ``MesonBuilder`` and ``MesonPackage`` base classes come with the following phases:
+The ``MesonPackage`` base class comes with the following phases:
 
 #. ``meson`` - generate ninja files
 #. ``build`` - build the project

lib/spack/docs/build_systems/octavepackage.rst

@@ -1,13 +1,13 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
 
 .. _octavepackage:
 
-------
-Octave
-------
+-------------
+OctavePackage
+-------------
 
 Octave has its own build system for installing packages.
 
@@ -15,7 +15,7 @@ Octave has its own build system for installing packages.
 Phases
 ^^^^^^
 
-The ``OctaveBuilder`` and ``OctavePackage`` base classes have a single phase:
+The ``OctavePackage`` base class has a single phase:
 
 #. ``install`` - install the package
 

lib/spack/docs/build_systems/perlpackage.rst

@@ -1,13 +1,13 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
 
 .. _perlpackage:
 
-----
-Perl
-----
+-----------
+PerlPackage
+-----------
 
 Much like Octave, Perl has its own language-specific
 build system.
@@ -16,7 +16,7 @@ build system.
 Phases
 ^^^^^^
 
-The ``PerlBuilder`` and ``PerlPackage`` base classes come with 3 phases that can be overridden:
+The ``PerlPackage`` base class comes with 3 phases that can be overridden:
 
 #. ``configure`` - configure the package
 #. ``build`` - build the package

lib/spack/docs/build_systems/qmakepackage.rst

@@ -1,13 +1,13 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
 
 .. _qmakepackage:
 
------
-QMake
------
+------------
+QMakePackage
+------------
 
 Much like Autotools and CMake, QMake is a build-script generator
 designed by the developers of Qt. In its simplest form, Spack's
@@ -29,7 +29,7 @@ variables or edit ``*.pro`` files to get things working properly.
 Phases
 ^^^^^^
 
-The ``QMakeBuilder`` and ``QMakePackage`` base classes come with the following phases:
+The ``QMakePackage`` base class comes with the following phases:
 
 #. ``qmake`` - generate Makefiles
 #. ``build`` - build the project

lib/spack/docs/build_systems/racketpackage.rst

@@ -1,46 +0,0 @@
-.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
-   Spack Project Developers. See the top-level COPYRIGHT file for details.
-
-   SPDX-License-Identifier: (Apache-2.0 OR MIT)
-
-.. _racketpackage:
-
-------
-Racket
-------
-
-Much like Python, Racket packages and modules have their own special build system.
-To learn more about the specifics of Racket package system, please refer to the
-`Racket Docs <https://docs.racket-lang.org/pkg/cmdline.html>`_.
-
-^^^^^^
-Phases
-^^^^^^
-
-The ``RacketBuilder`` and ``RacketPackage`` base classes provides an ``install`` phase that
-can be overridden, corresponding to the use of:
-
-.. code-block:: console
-
-   $ raco pkg install
-
-^^^^^^^
-Caveats
-^^^^^^^
-
-In principle, ``raco`` supports a second, ``setup`` phase; however, we have not
-implemented this separately, as in normal circumstances, ``install`` also handles
-running ``setup`` automatically.
-
-Unlike Python, Racket currently on supports two installation scopes for packages, user
-or system, and keeps a registry of installed packages at each scope in its configuration files.
-This means we can't simply compose a "``RACKET_PATH``" environment variable listing all of the
-places packages are installed, and update this at will.
-
-Unfortunately this means that all currently installed packages which extend Racket via ``raco pkg install``
-are accessible whenever Racket is accessible.
-
-Additionally, because Spack does not implement uninstall hooks, uninstalling a Spack  ``rkt-`` package
-will have no effect on the ``raco`` installed packages visible to your Racket installation.
-Instead, you must manually run ``raco pkg remove`` to keep the two package managers in a mutually
-consistent state.

lib/spack/docs/build_systems/rocmpackage.rst

@@ -1,4 +1,4 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
@@ -95,7 +95,7 @@ class of your package.  For example, you can add it to your
                 # Set up the hip macros needed by the build
                 args.extend([
                     '-DENABLE_HIP=ON',
-                    '-DHIP_ROOT_DIR={0}'.format(spec['hip'].prefix)])
+                    '-DHIP_ROOT_DIR={0}'.format(spec['hip'].prefix])
                 rocm_archs = spec.variants['amdgpu_target'].value
                 if 'none' not in rocm_archs:
                     args.append('-DHIP_HIPCC_FLAGS=--amdgpu-target={0}'

lib/spack/docs/build_systems/rpackage.rst

@@ -1,4 +1,4 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
@@ -19,7 +19,7 @@ new Spack packages for.
 Phases
 ^^^^^^
 
-The ``RBuilder`` and ``RPackage`` base classes have a single phase:
+The ``RPackage`` base class has a single phase:
 
 #. ``install`` - install the package
 
@@ -193,10 +193,10 @@ Build system dependencies
 
 As an extension of the R ecosystem, your package will obviously depend
 on R to build and run. Normally, we would use ``depends_on`` to express
-this, but for R packages, we use ``extends``. This implies a special
-dependency on R, which is used to set environment variables such as
-``R_LIBS`` uniformly. Since every R package needs this, the ``RPackage``
-base class contains:
+this, but for R packages, we use ``extends``. ``extends`` is similar to
+``depends_on``, but adds an additional feature: the ability to "activate"
+the package by symlinking it to the R installation directory. Since
+every R package needs this, the ``RPackage`` base class contains:
 
 .. code-block:: python
 

lib/spack/docs/build_systems/rubypackage.rst

@@ -1,13 +1,13 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
 
 .. _rubypackage:
 
-----
-Ruby
-----
+-----------
+RubyPackage
+-----------
 
 Like Perl, Python, and R, Ruby has its own build system for
 installing Ruby gems.
@@ -16,7 +16,7 @@ installing Ruby gems.
 Phases
 ^^^^^^
 
-The ``RubyBuilder`` and ``RubyPackage`` base classes provide the following phases that
+The ``RubyPackage`` base class provides the following phases that
 can be overridden:
 
 #. ``build`` - build everything needed to install

lib/spack/docs/build_systems/sconspackage.rst

@@ -1,13 +1,13 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
 
 .. _sconspackage:
 
------
-SCons
------
+------------
+SConsPackage
+------------
 
 SCons is a general-purpose build system that does not rely on
 Makefiles to build software. SCons is written in Python, and handles
@@ -42,7 +42,7 @@ As previously mentioned, SCons allows developers to add subcommands like
    $ scons install
 
 
-To facilitate this, the ``SConsBuilder`` and ``SconsPackage`` base classes provide the
+To facilitate this, the ``SConsPackage`` base class provides the
 following phases:
 
 #. ``build`` - build the package

lib/spack/docs/build_systems/sippackage.rst

@@ -1,13 +1,13 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
 
 .. _sippackage:
 
----
-SIP
----
+----------
+SIPPackage
+----------
 
 SIP is a tool that makes it very easy to create Python bindings for C and C++
 libraries. It was originally developed to create PyQt, the Python bindings for
@@ -22,7 +22,7 @@ provides support functions to the automatically generated code.
 Phases
 ^^^^^^
 
-The ``SIPBuilder`` and ``SIPPackage`` base classes come with the following phases:
+The ``SIPPackage`` base class comes with the following phases:
 
 #. ``configure`` - configure the package
 #. ``build`` - build the package

lib/spack/docs/build_systems/sourceforgepackage.rst

@@ -1,55 +0,0 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
-   Spack Project Developers. See the top-level COPYRIGHT file for details.
-
-   SPDX-License-Identifier: (Apache-2.0 OR MIT)
-
-.. _sourceforgepackage:
-
-------------------
-SourceforgePackage
-------------------
-
-``SourceforgePackage`` is a 
-`mixin-class <https://en.wikipedia.org/wiki/Mixin>`_. It automatically
-sets the URL based on a list of Sourceforge mirrors listed in
-`sourceforge_mirror_path`, which defaults to a half dozen known mirrors.
-Refer to the package source 
-(`<https://github.com/spack/spack/blob/develop/lib/spack/spack/build_systems/sourceforge.py>`__) for the current list of mirrors used by Spack.
-
-
-^^^^^^^
-Methods
-^^^^^^^
-
-This package provides a method for populating mirror URLs.
-
-**urls**
-
-    This method returns a list of possible URLs for package source.
-    It is decorated with `property` so its results are treated as
-    a package attribute.
-
-    Refer to 
-    `<https://spack.readthedocs.io/en/latest/packaging_guide.html#mirrors-of-the-main-url>`__
-    for information on how Spack uses the `urls` attribute during
-    fetching.
-
-^^^^^
-Usage
-^^^^^
-
-This helper package can be added to your package by adding it as a base
-class of your package and defining the relative location of an archive
-file for one version of your software.
-
-.. code-block:: python
-   :emphasize-lines: 1,3
-
-    class MyPackage(AutotoolsPackage, SourceforgePackage):
-        ...
-        sourceforge_mirror_path = "my-package/mypackage.1.0.0.tar.gz"
-        ...
-
-Over 40 packages are using ``SourceforcePackage`` this mix-in as of
-July 2022 so there are multiple packages to choose from if you want
-to see a real example.

lib/spack/docs/build_systems/wafpackage.rst

@@ -1,13 +1,13 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
 
 .. _wafpackage:
 
----
-Waf
----
+----------
+WafPackage
+----------
 
 Like SCons, Waf is a general-purpose build system that does not rely
 on Makefiles to build software.
@@ -16,7 +16,7 @@ on Makefiles to build software.
 Phases
 ^^^^^^
 
-The ``WafBuilder`` and ``WafPackage`` base classes come with the following phases:
+The ``WafPackage`` base class comes with the following phases:
 
 #. ``configure`` - configure the project
 #. ``build`` - build the project

lib/spack/docs/chain.rst

@@ -1,4 +1,4 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)

lib/spack/docs/conf.py

@@ -1,4 +1,4 @@
-# Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+# Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
 # Spack Project Developers. See the top-level COPYRIGHT file for details.
 #
 # SPDX-License-Identifier: (Apache-2.0 OR MIT)
@@ -23,51 +23,42 @@
 import sys
 from glob import glob
 
-from docutils.statemachine import StringList
-from sphinx.domains.python import PythonDomain
 from sphinx.ext.apidoc import main as sphinx_apidoc
-from sphinx.parsers import RSTParser
 
 # -- Spack customizations -----------------------------------------------------
 # If extensions (or modules to document with autodoc) are in another directory,
 # add these directories to sys.path here. If the directory is relative to the
 # documentation root, use os.path.abspath to make it absolute, like shown here.
-link_name = os.path.abspath("_spack_root")
-if not os.path.exists(link_name):
-    os.symlink(os.path.abspath("../../.."), link_name, target_is_directory=True)
-sys.path.insert(0, os.path.abspath("_spack_root/lib/spack/external"))
-sys.path.insert(0, os.path.abspath("_spack_root/lib/spack/external/pytest-fallback"))
+sys.path.insert(0, os.path.abspath('_spack_root/lib/spack/external'))
 
 if sys.version_info[0] < 3:
-    sys.path.insert(0, os.path.abspath("_spack_root/lib/spack/external/yaml/lib"))
+    sys.path.insert(
+        0, os.path.abspath('_spack_root/lib/spack/external/yaml/lib'))
 else:
-    sys.path.insert(0, os.path.abspath("_spack_root/lib/spack/external/yaml/lib3"))
+    sys.path.insert(
+        0, os.path.abspath('_spack_root/lib/spack/external/yaml/lib3'))
 
-sys.path.append(os.path.abspath("_spack_root/lib/spack/"))
+sys.path.append(os.path.abspath('_spack_root/lib/spack/'))
 
 # Add the Spack bin directory to the path so that we can use its output in docs.
-os.environ["SPACK_ROOT"] = os.path.abspath("_spack_root")
-os.environ["PATH"] += "%s%s" % (os.pathsep, os.path.abspath("_spack_root/bin"))
+os.environ['SPACK_ROOT'] = os.path.abspath('_spack_root')
+os.environ['PATH'] += "%s%s" % (os.pathsep, os.path.abspath('_spack_root/bin'))
 
 # Set an environment variable so that colify will print output like it would to
 # a terminal.
-os.environ["COLIFY_SIZE"] = "25x120"
-os.environ["COLUMNS"] = "120"
+os.environ['COLIFY_SIZE'] = '25x120'
+os.environ['COLUMNS'] = '120'
 
 # Generate full package list if needed
-subprocess.call(["spack", "list", "--format=html", "--update=package_list.html"])
+subprocess.call([
+    'spack', 'list', '--format=html', '--update=package_list.html'])
 
 # Generate a command index if an update is needed
-subprocess.call(
-    [
-        "spack",
-        "commands",
-        "--format=rst",
-        "--header=command_index.in",
-        "--update=command_index.rst",
-    ]
-    + glob("*rst")
-)
+subprocess.call([
+    'spack', 'commands',
+    '--format=rst',
+    '--header=command_index.in',
+    '--update=command_index.rst'] + glob('*rst'))
 
 #
 # Run sphinx-apidoc
@@ -77,12 +68,12 @@
 # Without this, the API Docs will never actually update
 #
 apidoc_args = [
-    "--force",  # Overwrite existing files
-    "--no-toc",  # Don't create a table of contents file
-    "--output-dir=.",  # Directory to place all output
+    '--force',         # Overwrite existing files
+    '--no-toc',        # Don't create a table of contents file
+    '--output-dir=.',  # Directory to place all output
 ]
-sphinx_apidoc(apidoc_args + ["_spack_root/lib/spack/spack"])
-sphinx_apidoc(apidoc_args + ["_spack_root/lib/spack/llnl"])
+sphinx_apidoc(apidoc_args + ['_spack_root/lib/spack/spack'])
+sphinx_apidoc(apidoc_args + ['_spack_root/lib/spack/llnl'])
 
 # Enable todo items
 todo_include_todos = True
@@ -90,78 +81,56 @@
 #
 # Disable duplicate cross-reference warnings.
 #
+from sphinx.domains.python import PythonDomain
+
+
 class PatchedPythonDomain(PythonDomain):
     def resolve_xref(self, env, fromdocname, builder, typ, target, node, contnode):
-        if "refspecific" in node:
-            del node["refspecific"]
+        if 'refspecific' in node:
+            del node['refspecific']
         return super(PatchedPythonDomain, self).resolve_xref(
-            env, fromdocname, builder, typ, target, node, contnode
-        )
-
-
-#
-# Disable tabs to space expansion in code blocks
-# since Makefiles require tabs.
-#
-class NoTabExpansionRSTParser(RSTParser):
-    def parse(self, inputstring, document):
-        if isinstance(inputstring, str):
-            lines = inputstring.splitlines()
-            inputstring = StringList(lines, document.current_source)
-        super().parse(inputstring, document)
-
+            env, fromdocname, builder, typ, target, node, contnode)
 
 def setup(sphinx):
     sphinx.add_domain(PatchedPythonDomain, override=True)
-    sphinx.add_source_parser(NoTabExpansionRSTParser, override=True)
-
 
 # -- General configuration -----------------------------------------------------
 
 # If your documentation needs a minimal Sphinx version, state it here.
-needs_sphinx = "3.4"
+needs_sphinx = '1.8'
 
 # Add any Sphinx extension module names here, as strings. They can be extensions
 # coming with Sphinx (named 'sphinx.ext.*') or your custom ones.
-extensions = [
-    "sphinx.ext.autodoc",
-    "sphinx.ext.graphviz",
-    "sphinx.ext.intersphinx",
-    "sphinx.ext.napoleon",
-    "sphinx.ext.todo",
-    "sphinx.ext.viewcode",
-    "sphinx_design",
-    "sphinxcontrib.programoutput",
-]
+extensions = ['sphinx.ext.autodoc',
+              'sphinx.ext.graphviz',
+              'sphinx.ext.napoleon',
+              'sphinx.ext.todo',
+              'sphinxcontrib.programoutput']
 
 # Set default graphviz options
 graphviz_dot_args = [
-    "-Grankdir=LR",
-    "-Gbgcolor=transparent",
-    "-Nshape=box",
-    "-Nfontname=monaco",
-    "-Nfontsize=10",
-]
+    '-Grankdir=LR', '-Gbgcolor=transparent',
+    '-Nshape=box', '-Nfontname=monaco', '-Nfontsize=10']
 
 # Get nice vector graphics
 graphviz_output_format = "svg"
 
 
 # Add any paths that contain templates here, relative to this directory.
-templates_path = ["_templates"]
+templates_path = ['_templates']
 
 # The suffix of source filenames.
-source_suffix = ".rst"
+source_suffix = '.rst'
 
 # The encoding of source files.
-source_encoding = "utf-8-sig"
+source_encoding = 'utf-8-sig'
 
 # The master toctree document.
-master_doc = "index"
+master_doc = 'index'
 
 # General information about the project.
-project = u"Spack"
-copyright = u"2013-2021, Lawrence Livermore National Laboratory."
+project = u'Spack'
+copyright = u'2013-2021, Lawrence Livermore National Laboratory.'
 
 # The version info for the project you're documenting, acts as replacement for
 # |version| and |release|, also used in various other places throughout the
@@ -170,16 +139,16 @@ def setup(sphinx):
 # The short X.Y version.
 import spack
 
-version = ".".join(str(s) for s in spack.spack_version_info[:2])
+version = '.'.join(str(s) for s in spack.spack_version_info[:2])
 # The full version, including alpha/beta/rc tags.
 release = spack.spack_version
 
 # The language for content autogenerated by Sphinx. Refer to documentation
 # for a list of supported languages.
-# language = None
+#language = None
 
 # Places to look for .po/.mo files for doc translations
-# locale_dirs = []
+#locale_dirs = []
 
 # Sphinx gettext settings
 gettext_compact = True
@@ -187,46 +156,27 @@ def setup(sphinx):
 
 # There are two options for replacing |today|: either, you set today to some
 # non-false value, then it is used:
-# today = ''
+#today = ''
 # Else, today_fmt is used as the format for a strftime call.
-# today_fmt = '%B %d, %Y'
+#today_fmt = '%B %d, %Y'
 
 # List of patterns, relative to source directory, that match files and
 # directories to ignore when looking for source files.
-exclude_patterns = ["_build", "_spack_root", ".spack-env"]
-
-nitpicky = True
-nitpick_ignore = [
-    # Python classes that intersphinx is unable to resolve
-    ("py:class", "argparse.HelpFormatter"),
-    ("py:class", "contextlib.contextmanager"),
-    ("py:class", "module"),
-    ("py:class", "_io.BufferedReader"),
-    ("py:class", "unittest.case.TestCase"),
-    ("py:class", "_frozen_importlib_external.SourceFileLoader"),
-    ("py:class", "clingo.Control"),
-    ("py:class", "six.moves.urllib.parse.ParseResult"),
-    # Spack classes that are private and we don't want to expose
-    ("py:class", "spack.provider_index._IndexBase"),
-    ("py:class", "spack.repo._PrependFileLoader"),
-    ("py:class", "spack.build_systems._checks.BaseBuilder"),
-    # Spack classes that intersphinx is unable to resolve
-    ("py:class", "spack.version.VersionBase"),
-]
+exclude_patterns = ['_build', '_spack_root', '.spack-env']
 
 # The reST default role (used for this markup: `text`) to use for all documents.
-# default_role = None
+#default_role = None
 
 # If true, '()' will be appended to :func: etc. cross-reference text.
-# add_function_parentheses = True
+#add_function_parentheses = True
 
 # If true, the current module name will be prepended to all description
 # unit titles (such as .. function::).
-# add_module_names = True
+#add_module_names = True
 
 # If true, sectionauthor and moduleauthor directives will be shown in the
 # output. They are ignored by default.
-# show_authors = False
+#show_authors = False
 
 # The name of the Pygments (syntax highlighting) style to use.
 # We use our own extension of the default style with a few modifications
@@ -237,151 +187,156 @@ def setup(sphinx):
 
 class SpackStyle(DefaultStyle):
     styles = DefaultStyle.styles.copy()
-    background_color = "#f4f4f8"
+    background_color       = "#f4f4f8"
     styles[Generic.Output] = "#355"
     styles[Generic.Prompt] = "bold #346ec9"
 
-
 import pkg_resources
 
 dist = pkg_resources.Distribution(__file__)
-sys.path.append(".")  # make 'conf' module findable
-ep = pkg_resources.EntryPoint.parse("spack = conf:SpackStyle", dist=dist)
-dist._ep_map = {"pygments.styles": {"plugin1": ep}}
+sys.path.append('.')  # make 'conf' module findable
+ep = pkg_resources.EntryPoint.parse('spack = conf:SpackStyle', dist=dist)
+dist._ep_map = {'pygments.styles': {'plugin1': ep}}
 pkg_resources.working_set.add(dist)
 
-pygments_style = "spack"
+pygments_style = 'spack'
 
 # A list of ignored prefixes for module index sorting.
-# modindex_common_prefix = []
+#modindex_common_prefix = []
 
 
 # -- Options for HTML output ---------------------------------------------------
 
 # The theme to use for HTML and HTML Help pages.  See the documentation for
 # a list of builtin themes.
-html_theme = "sphinx_rtd_theme"
+html_theme = 'sphinx_rtd_theme'
 
 # Theme options are theme-specific and customize the look and feel of a theme
 # further.  For a list of options available for each theme, see the
 # documentation.
-html_theme_options = {"logo_only": True}
+html_theme_options = { 'logo_only' : True }
 
 # Add any paths that contain custom themes here, relative to this directory.
 # html_theme_path = ["_themes"]
 
 # The name for this set of Sphinx documents.  If None, it defaults to
 # "<project> v<release> documentation".
-# html_title = None
+#html_title = None
 
 # A shorter title for the navigation bar.  Default is the same as html_title.
-# html_short_title = None
+#html_short_title = None
 
 # The name of an image file (relative to this directory) to place at the top
 # of the sidebar.
-html_logo = "_spack_root/share/spack/logo/spack-logo-white-text.svg"
+html_logo = '_spack_root/share/spack/logo/spack-logo-white-text.svg'
 
 # The name of an image file (within the static path) to use as favicon of the
 # docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
 # pixels large.
-html_favicon = "_spack_root/share/spack/logo/favicon.ico"
+html_favicon = '_spack_root/share/spack/logo/favicon.ico'
 
 # Add any paths that contain custom static files (such as style sheets) here,
 # relative to this directory. They are copied after the builtin static files,
 # so a file named "default.css" will overwrite the builtin "default.css".
-html_static_path = ["_static"]
+html_static_path = ['_static']
 
 # If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
 # using the given strftime format.
-html_last_updated_fmt = "%b %d, %Y"
+html_last_updated_fmt = '%b %d, %Y'
 
 # If true, SmartyPants will be used to convert quotes and dashes to
 # typographically correct entities.
-# html_use_smartypants = True
+#html_use_smartypants = True
 
 # Custom sidebar templates, maps document names to template names.
-# html_sidebars = {}
+#html_sidebars = {}
 
 # Additional templates that should be rendered to pages, maps page names to
 # template names.
-# html_additional_pages = {}
+#html_additional_pages = {}
 
 # If false, no module index is generated.
-# html_domain_indices = True
+#html_domain_indices = True
 
 # If false, no index is generated.
-# html_use_index = True
+#html_use_index = True
 
 # If true, the index is split into individual pages for each letter.
-# html_split_index = False
+#html_split_index = False
 
 # If true, links to the reST sources are added to the pages.
-# html_show_sourcelink = True
+#html_show_sourcelink = True
 
 # If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
-# html_show_sphinx = False
+#html_show_sphinx = False
 
 # If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
-# html_show_copyright = True
+#html_show_copyright = True
 
 # If true, an OpenSearch description file will be output, and all pages will
 # contain a <link> tag referring to it.  The value of this option must be the
 # base URL from which the finished HTML is served.
-# html_use_opensearch = ''
+#html_use_opensearch = ''
 
 # This is the file name suffix for HTML files (e.g. ".xhtml").
-# html_file_suffix = None
+#html_file_suffix = None
 
 # Output file base name for HTML help builder.
-htmlhelp_basename = "Spackdoc"
+htmlhelp_basename = 'Spackdoc'
 
 
 # -- Options for LaTeX output --------------------------------------------------
 
 latex_elements = {
-    # The paper size ('letterpaper' or 'a4paper').
-    #'papersize': 'letterpaper',
-    # The font size ('10pt', '11pt' or '12pt').
-    #'pointsize': '10pt',
-    # Additional stuff for the LaTeX preamble.
-    #'preamble': '',
+# The paper size ('letterpaper' or 'a4paper').
+#'papersize': 'letterpaper',
+
+# The font size ('10pt', '11pt' or '12pt').
+#'pointsize': '10pt',
+
+# Additional stuff for the LaTeX preamble.
+#'preamble': '',
 }
 
 # Grouping the document tree into LaTeX files. List of tuples
 # (source start file, target name, title, author, documentclass [howto/manual]).
 latex_documents = [
-    ("index", "Spack.tex", u"Spack Documentation", u"Todd Gamblin", "manual"),
+  ('index', 'Spack.tex', u'Spack Documentation',
+   u'Todd Gamblin', 'manual'),
 ]
 
 # The name of an image file (relative to this directory) to place at the top of
 # the title page.
-# latex_logo = None
+#latex_logo = None
 
 # For "manual" documents, if this is true, then toplevel headings are parts,
 # not chapters.
-# latex_use_parts = False
+#latex_use_parts = False
 
 # If true, show page references after internal links.
-# latex_show_pagerefs = False
+#latex_show_pagerefs = False
 
 # If true, show URL addresses after external links.
-# latex_show_urls = False
+#latex_show_urls = False
 
 # Documents to append as an appendix to all manuals.
-# latex_appendices = []
+#latex_appendices = []
 
 # If false, no module index is generated.
-# latex_domain_indices = True
+#latex_domain_indices = True
 
 
 # -- Options for manual page output --------------------------------------------
 
 # One entry per manual page. List of tuples
 # (source start file, name, description, authors, manual section).
-man_pages = [("index", "spack", u"Spack Documentation", [u"Todd Gamblin"], 1)]
+man_pages = [
+    ('index', 'spack', u'Spack Documentation',
+     [u'Todd Gamblin'], 1)
+]
 
 # If true, show URL addresses after external links.
-# man_show_urls = False
+#man_show_urls = False
 
 
 # -- Options for Texinfo output ------------------------------------------------
@@ -390,30 +345,16 @@ class SpackStyle(DefaultStyle):
 # (source start file, target name, title, author,
 #  dir menu entry, description, category)
 texinfo_documents = [
-    (
-        "index",
-        "Spack",
-        u"Spack Documentation",
-        u"Todd Gamblin",
-        "Spack",
-        "One line description of project.",
-        "Miscellaneous",
-    ),
+  ('index', 'Spack', u'Spack Documentation',
+   u'Todd Gamblin', 'Spack', 'One line description of project.',
+   'Miscellaneous'),
 ]
 
 # Documents to append as an appendix to all manuals.
-# texinfo_appendices = []
+#texinfo_appendices = []
 
 # If false, no module index is generated.
-# texinfo_domain_indices = True
+#texinfo_domain_indices = True
 
 # How to display URL addresses: 'footnote', 'no', or 'inline'.
-# texinfo_show_urls = 'footnote'
-
-
-# -- Extension configuration -------------------------------------------------
-
-# sphinx.ext.intersphinx
-intersphinx_mapping = {
-    "python": ("https://docs.python.org/3", None),
-}
+#texinfo_show_urls = 'footnote'

lib/spack/docs/config_yaml.rst

@@ -1,13 +1,13 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
 
 .. _config-yaml:
 
-============================
-Spack Settings (config.yaml)
-============================
+==============
+Basic Settings
+==============
 
 Spack's basic configuration options are set in ``config.yaml``.  You can
 see the default settings by looking at
@@ -19,9 +19,9 @@ see the default settings by looking at
 These settings can be overridden in ``etc/spack/config.yaml`` or
 ``~/.spack/config.yaml``.  See :ref:`configuration-scopes` for details.
 
----------------------
-``install_tree:root``
----------------------
+--------------------
+``install_tree``
+--------------------
 
 The location where Spack will install packages and their dependencies.
 Default is ``$spack/opt/spack``.
@@ -72,6 +72,21 @@ used to configure module names.
    packages have been installed will prevent Spack from being
    able to find the old installation directories.
 
+--------------------
+``module_roots``
+--------------------
+
+Controls where Spack installs generated module files.  You can customize
+the location for each type of module.  e.g.:
+
+.. code-block:: yaml
+
+   module_roots:
+     tcl:    $spack/share/spack/modules
+     lmod:   $spack/share/spack/lmod
+
+See :ref:`modules` for details.
+
 --------------------
 ``build_stage``
 --------------------
@@ -224,9 +239,9 @@ them). Please note that we currently disable ccache's ``hash_dir``
 feature to avoid an issue with the stage directory (see
 https://github.com/LLNL/spack/pull/3761#issuecomment-294352232).
 
------------------------
-``shared_linking:type``
------------------------
+------------------
+``shared_linking``
+------------------
 
 Control whether Spack embeds ``RPATH`` or ``RUNPATH`` attributes in ELF binaries
 so that they can find their dependencies. Has no effect on macOS.
@@ -244,62 +259,3 @@ and ld.so will ONLY search for dependencies in the ``RUNPATH`` of
 the loading object.
 
 DO NOT MIX the two options within the same install tree.
-
------------------------
-``shared_linking:bind``
------------------------
-
-This is an *experimental option* that controls whether Spack embeds absolute paths
-to needed shared libraries in ELF executables and shared libraries on Linux. Setting
-this option to ``true`` has two advantages:
-
-1. **Improved startup time**: when running an executable, the dynamic loader does not
-   have to perform a search for needed libraries, they are loaded directly.
-2. **Reliability**: libraries loaded at runtime are those that were linked to. This
-   minimizes the risk of accidentally picking up system libraries.
-
-In the current implementation, Spack sets the soname (shared object name) of
-libraries to their install path upon installation. This has two implications:
-
-1. binding does not apply to libraries installed *before* the option was enabled;
-2. toggling the option off does *not* prevent binding of libraries installed when
-   the option was still enabled.
-
-It is also worth noting that:
-
-1. Applications relying on ``dlopen(3)`` will continue to work, even when they open
-   a library by name. This is because ``RPATH``\s are retained in binaries also
-   when ``bind`` is enabled.
-2. ``LD_PRELOAD`` continues to work for the typical use case of overriding
-   symbols, such as preloading a library with a more efficient ``malloc``.
-   However, the preloaded library will be loaded *additionally to*, instead of
-   *in place of* another library with the same name --- this can be problematic
-   in very rare cases where libraries rely on a particular ``init`` or ``fini``
-   order.
-
-.. note::
-
-   In some cases packages provide *stub libraries* that only contain an interface
-   for linking, but lack an implementation for runtime. An example of this is
-   ``libcuda.so``, provided by the CUDA toolkit; it can be used to link against,
-   but the library needed at runtime is the one installed with the CUDA driver.
-   To avoid binding those libraries, they can be marked as non-bindable using
-   a property in the package:
-
-   .. code-block:: python
-
-      class Example(Package):
-         non_bindable_shared_objects = ["libinterface.so"]
-
-----------------------
-``terminal_title``
-----------------------
-
-By setting this option to ``true``, Spack will update the terminal's title to
-provide information about its current progress as well as the current and
-total package numbers.
-
-To work properly, this requires your terminal to reset its title after
-Spack has finished its work, otherwise Spack's status information will
-remain in the terminal's title indefinitely. Most terminals should already
-be set up this way and clear Spack's status information.

lib/spack/docs/configuration.rst

@@ -1,4 +1,4 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
@@ -13,16 +13,12 @@ Spack has many configuration files.  Here is a quick list of them, in
 case you want to skip directly to specific docs:
 
 * :ref:`compilers.yaml <compiler-config>`
-* :ref:`concretizer.yaml <concretizer-options>`
 * :ref:`config.yaml <config-yaml>`
 * :ref:`mirrors.yaml <mirrors>`
 * :ref:`modules.yaml <modules>`
 * :ref:`packages.yaml <build-settings>`
 * :ref:`repos.yaml <repositories>`
 
-You can also add any of these as inline configuration in ``spack.yaml``
-in an :ref:`environment <environment-configuration>`.
-
 -----------
 YAML Format
 -----------
@@ -37,6 +33,8 @@ Here is an example ``config.yaml`` file:
 
    config:
      install_tree: $spack/opt/spack
+     module_roots:
+       lmod: $spack/share/spack/lmod
      build_stage:
        - $tempdir/$user/spack-stage
        - ~/.spack/stage
@@ -251,6 +249,8 @@ your configurations look like this:
 
    config:
      install_tree: $spack/opt/spack
+     module_roots:
+       lmod: $spack/share/spack/lmod
      build_stage:
        - $tempdir/$user/spack-stage
        - ~/.spack/stage
@@ -274,6 +274,8 @@ command:
    $ spack config get config
    config:
      install_tree: /some/other/directory
+     module_roots:
+       lmod: $spack/share/spack/lmod
      build_stage:
        - $tempdir/$user/spack-stage
        - ~/.spack/stage
@@ -339,11 +341,13 @@ higher-precedence scope is *prepended* to the defaults. ``spack config
 get config`` shows the result:
 
 .. code-block:: console
-   :emphasize-lines: 5-8
+   :emphasize-lines: 7-10
 
    $ spack config get config
    config:
      install_tree: /some/other/directory
+     module_roots:
+       lmod: $spack/share/spack/lmod
      build_stage:
        - /lustre-scratch/$user/spack
        - ~/mystage
@@ -367,11 +371,13 @@ user config looked like this:
 The merged configuration would look like this:
 
 .. code-block:: console
-   :emphasize-lines: 5-6
+   :emphasize-lines: 7-8
 
    $ spack config get config
    config:
      install_tree: /some/other/directory
+     module_roots:
+       lmod: $spack/share/spack/lmod
      build_stage:
        - /lustre-scratch/$user/spack
        - ~/mystage
@@ -396,26 +402,12 @@ Spack-specific variables
 
 Spack understands several special variables. These are:
 
-* ``$env``: name of the currently active :ref:`environment <environments>`
 * ``$spack``: path to the prefix of this Spack installation
 * ``$tempdir``: default system temporary directory (as specified in
   Python's `tempfile.tempdir
   <https://docs.python.org/2/library/tempfile.html#tempfile.tempdir>`_
   variable.
 * ``$user``: name of the current user
-* ``$user_cache_path``: user cache directory (``~/.spack`` unless
-  :ref:`overridden <local-config-overrides>`)
-* ``$architecture``: the architecture triple of the current host, as
-  detected by Spack.
-* ``$arch``: alias for ``$architecture``.
-* ``$platform``: the platform of the current host, as detected by Spack.
-* ``$operating_system``: the operating system of the current host, as
-  detected by the ``distro`` python module.
-* ``$os``: alias for ``$operating_system``.
-* ``$target``: the ISA target for the current host, as detected by
-  ArchSpec. E.g. ``skylake`` or ``neoverse-n1``.
-* ``$target_family``. The target family for the current host, as
-  detected by ArchSpec. E.g. ``x86_64`` or ``aarch64``.
 
 Note that, as with shell variables, you can write these as ``$varname``
 or with braces to distinguish the variable from surrounding characters:
@@ -503,6 +495,9 @@ account all scopes. For example, to see the fully merged
      template_dirs:
      - $spack/templates
      directory_layout: {architecture}/{compiler.name}-{compiler.version}/{name}-{version}-{hash}
+     module_roots:
+       tcl: $spack/share/spack/modules
+       lmod: $spack/share/spack/lmod
      build_stage:
      - $tempdir/$user/spack-stage
      - ~/.spack/stage
@@ -550,6 +545,9 @@ down the problem:
    /home/myuser/spack/etc/spack/defaults/config.yaml:23    template_dirs:
    /home/myuser/spack/etc/spack/defaults/config.yaml:24    - $spack/templates
    /home/myuser/spack/etc/spack/defaults/config.yaml:28    directory_layout: {architecture}/{compiler.name}-{compiler.version}/{name}-{version}-{hash}
+   /home/myuser/spack/etc/spack/defaults/config.yaml:32    module_roots:
+   /home/myuser/spack/etc/spack/defaults/config.yaml:33      tcl: $spack/share/spack/modules
+   /home/myuser/spack/etc/spack/defaults/config.yaml:34      lmod: $spack/share/spack/lmod
    /home/myuser/spack/etc/spack/defaults/config.yaml:49    build_stage:
    /home/myuser/spack/etc/spack/defaults/config.yaml:50    - $tempdir/$user/spack-stage
    /home/myuser/spack/etc/spack/defaults/config.yaml:51    - ~/.spack/stage
@@ -560,43 +558,7 @@ down the problem:
 
 You can see above that the ``build_jobs`` and ``debug`` settings are
 built in and are not overridden by a configuration file. The
-``verify_ssl`` setting comes from the ``--insecure`` option on the
+``verify_ssl`` setting comes from the ``--insceure`` option on the
 command line. ``dirty`` and ``install_tree`` come from the custom
 scopes ``./my-scope`` and ``./my-scope-2``, and all other configuration
 options come from the default configuration files that ship with Spack.
-
-.. _local-config-overrides:
-
-------------------------------
-Overriding Local Configuration
-------------------------------
-
-Spack's ``system`` and ``user`` scopes provide ways for administrators and users to set
-global defaults for all Spack instances, but for use cases where one wants a clean Spack
-installation, these scopes can be undesirable. For example, users may want to opt out of
-global system configuration, or they may want to ignore their own home directory
-settings when running in a continuous integration environment.
-
-Spack also, by default, keeps various caches and user data in ``~/.spack``, but
-users may want to override these locations.
-
-Spack provides three environment variables that allow you to override or opt out of
-configuration locations:
-
-* ``SPACK_USER_CONFIG_PATH``: Override the path to use for the
-  ``user`` scope (``~/.spack`` by default).
-* ``SPACK_SYSTEM_CONFIG_PATH``: Override the path to use for the
-  ``system`` scope (``/etc/spack`` by default).
-* ``SPACK_DISABLE_LOCAL_CONFIG``: set this environment variable to completely disable
-  **both** the system and user configuration directories. Spack will only consider its
-  own defaults and ``site`` configuration locations.
-
-And one that allows you to move the default cache location:
-
-* ``SPACK_USER_CACHE_PATH``: Override the default path to use for user data
-  (misc_cache, tests, reports, etc.)
-
-With these settings, if you want to isolate Spack in a CI environment, you can do this::
-
-  export SPACK_DISABLE_LOCAL_CONFIG=true
-  export SPACK_USER_CACHE_PATH=/tmp/spack

lib/spack/docs/containers.rst

@@ -1,4 +1,4 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
@@ -59,8 +59,7 @@ other techniques to minimize the size of the final image:
    &&   echo "  specs:" \
    &&   echo "  - gromacs+mpi" \
    &&   echo "  - mpich" \
-   &&   echo "  concretizer:" \
-   &&   echo "    unify: true" \
+   &&   echo "  concretization: together" \
    &&   echo "  config:" \
    &&   echo "    install_tree: /opt/software" \
    &&   echo "  view: /opt/view") > /opt/spack-environment/spack.yaml
@@ -109,10 +108,9 @@ Spack Images on Docker Hub
 --------------------------
 
 Docker images with Spack preinstalled and ready to be used are
-built when a release is tagged, or nightly on ``develop``. The images
-are then pushed both to `Docker Hub <https://hub.docker.com/u/spack>`_
-and to `GitHub Container Registry <https://github.com/orgs/spack/packages?repo_name=spack>`_.
-The OS that are currently supported are summarized in the table below:
+built on `Docker Hub <https://hub.docker.com/u/spack>`_
+at every push to ``develop`` or to a release branch. The OS that
+are currently supported are summarized in the table below:
 
 .. _containers-supported-os:
 
@@ -122,31 +120,22 @@ The OS that are currently supported are summarized in the table below:
    * - Operating System
      - Base Image
      - Spack Image
+   * - Ubuntu 16.04
+     - ``ubuntu:16.04``
+     - ``spack/ubuntu-xenial``
    * - Ubuntu 18.04
      - ``ubuntu:18.04``
      - ``spack/ubuntu-bionic``
-   * - Ubuntu 20.04
-     - ``ubuntu:20.04``
-     - ``spack/ubuntu-focal``
-   * - Ubuntu 22.04
-     - ``ubuntu:22.04``
-     - ``spack/ubuntu-jammy``
+   * - CentOS 6
+     - ``centos:6``
+     - ``spack/centos6``
    * - CentOS 7
      - ``centos:7``
      - ``spack/centos7``
-   * - CentOS Stream
-     - ``quay.io/centos/centos:stream``
-     - ``spack/centos-stream``
-   * - openSUSE Leap
-     - ``opensuse/leap``
-     - ``spack/leap15``
-   * - Amazon Linux 2
-     - ``amazonlinux:2``
-     - ``spack/amazon-linux``
 
 All the images are tagged with the corresponding release of Spack:
 
-.. image:: images/ghcr_spack.png
+.. image:: dockerhub_spack.png
 
 with the exception of the ``latest`` tag that points to the HEAD
 of the ``develop`` branch. These images are available for anyone
@@ -211,7 +200,7 @@ Setting Base Images
 
 The ``images`` subsection is used to select both the image where
 Spack builds the software and the image where the built software
-is installed. This attribute can be set in different ways and
+is installed. This attribute can be set in two different ways and
 which one to use depends on the use case at hand.
 
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -256,8 +245,7 @@ software is respectively built and installed:
    &&   echo "  specs:" \
    &&   echo "  - gromacs+mpi" \
    &&   echo "  - mpich" \
-   &&   echo "  concretizer:" \
-   &&   echo "    unify: true" \
+   &&   echo "  concretization: together" \
    &&   echo "  config:" \
    &&   echo "    install_tree: /opt/software" \
    &&   echo "  view: /opt/view") > /opt/spack-environment/spack.yaml
@@ -272,54 +260,10 @@ software is respectively built and installed:
 
    ENTRYPOINT ["/bin/bash", "--rcfile", "/etc/profile", "-l"]
 
-This is the simplest available method of selecting base images, and we advise
+This method of selecting base images is the simplest of the two, and we advise
 to use it whenever possible. There are cases though where using Spack official
-images is not enough to fit production needs. In these situations users can
-extend the recipe to start with the bootstrapping of Spack at a certain pinned
-version or manually select which base image to start from in the recipe,
-as we'll see next.
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Use a Bootstrap Stage for Spack
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-In some cases users may want to pin the commit sha that is used for Spack, to ensure later
-reproducibility, or start from a fork of the official Spack repository to try a bugfix or
-a feature in the early stage of development. This is possible by being just a little more
-verbose when specifying information about Spack in the ``spack.yaml`` file:
-
-.. code-block:: yaml
-
-   images:
-     os: amazonlinux:2
-     spack:
-       # URL of the Spack repository to be used in the container image
-       url: <to-use-a-fork>
-       # Either a commit sha, a branch name or a tag
-       ref: <sha/tag/branch>
-       # If true turn a branch name or a tag into the corresponding commit
-       # sha at the time of recipe generation
-       resolve_sha: <true/false>
-
-``url`` specifies the URL from which to clone Spack and defaults to https://github.com/spack/spack.
-The ``ref`` attribute can be either a commit sha, a branch name or a tag. The default value in
-this case is to use the ``develop`` branch, but it may change in the future to point to the latest stable
-release. Finally ``resolve_sha`` transform branch names or tags into the corresponding commit
-shas at the time of recipe generation, to allow for a greater reproducibility of the results
-at a later time.
-
-The list of operating systems that can be used to bootstrap Spack can be
-obtained with:
-
-.. command-output:: spack containerize --list-os
-
-.. note::
-
-   The ``resolve_sha`` option uses ``git rev-parse`` under the hood and thus it requires
-   to checkout the corresponding Spack repository in a temporary folder before generating
-   the recipe. Recipe generation may take longer when this option is set to true because
-   of this additional step.
-
+images is not enough to fit production needs. In these situations users can manually
+select which base image to start from in the recipe, as we'll see next.
 
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 Use Custom Images Provided by Users
@@ -378,8 +322,7 @@ produces, for instance, the following ``Dockerfile``:
    &&   echo "      externals:" \
    &&   echo "      - spec: cuda%gcc" \
    &&   echo "        prefix: /usr/local/cuda" \
-   &&   echo "  concretizer:" \
-   &&   echo "    unify: true" \
+   &&   echo "  concretization: together" \
    &&   echo "  config:" \
    &&   echo "    install_tree: /opt/software" \
    &&   echo "  view: /opt/view") > /opt/spack-environment/spack.yaml
@@ -472,18 +415,6 @@ to customize the generation of container recipes:
      - Version of Spack use in the ``build`` stage
      - Valid tags for ``base:image``
      - Yes, if using constrained selection of base images
-   * - ``images:spack:url``
-     - Repository from which Spack is cloned
-     - Any fork of Spack
-     - No
-   * - ``images:spack:ref``
-     - Reference for the checkout of Spack
-     - Either a commit sha, a branch name or a tag
-     - No
-   * - ``images:spack:resolve_sha``
-     - Resolve branches and tags in ``spack.yaml`` to commits in the generated recipe
-     - True or False (default: False)
-     - No
    * - ``images:build``
      - Image to be used in the ``build`` stage
      - Any valid container image

lib/spack/docs/contribution_guide.rst

@@ -1,4 +1,4 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
@@ -71,7 +71,7 @@ locally to speed up the review process.
    new release that is causing problems. If this is the case, please file an issue.
 
 
-We currently test against Python 2.7 and 3.6-3.10 on both macOS and Linux and
+We currently test against Python 2.6, 2.7, and 3.5-3.7 on both macOS and Linux and
 perform 3 types of tests:
 
 .. _cmd-spack-unit-test:
@@ -253,6 +253,27 @@ to update them.
    multiple runs of ``spack style`` just to re-compute line numbers and
    makes it much easier to fix errors directly off of the CI output.
 
+.. warning::
+
+   Flake8 and ``pep8-naming`` require a number of dependencies in order
+   to run.  If you installed ``py-flake8`` and ``py-pep8-naming``, the
+   easiest way to ensure the right packages are on your ``PYTHONPATH`` is
+   to run::
+
+     spack activate py-flake8
+     spack activate pep8-naming
+
+   so that all of the dependencies are symlinked to a central
+   location. If you see an error message like:
+
+   .. code-block:: console
+
+      Traceback (most recent call last):
+        File: "/usr/bin/flake8", line 5, in <module>
+          from pkg_resources import load_entry_point
+      ImportError: No module named pkg_resources
+
+   that means Flake8 couldn't find setuptools in your ``PYTHONPATH``.
 
 ^^^^^^^^^^^^^^^^^^^
 Documentation Tests
@@ -288,9 +309,13 @@ All of these can be installed with Spack, e.g.
 
    .. code-block:: console
 
-      $ spack load py-sphinx py-sphinx-rtd-theme py-sphinxcontrib-programoutput
+      $ spack activate py-sphinx
+      $ spack activate py-sphinx-rtd-theme
+      $ spack activate py-sphinxcontrib-programoutput
 
-   so that all of the dependencies are added to PYTHONPATH.  If you see an error message
+   so that all of the dependencies are symlinked into that Python's
+   tree.  Alternatively, you could arrange for their library
+   directories to be added to PYTHONPATH.  If you see an error message
    like:
 
    .. code-block:: console
@@ -313,6 +338,15 @@ Once all of the dependencies are installed, you can try building the documentati
 If you see any warning or error messages, you will have to correct those before
 your PR is accepted.
 
+.. note::
+
+   There is also a ``run-doc-tests`` script in ``share/spack/qa``. The only
+   difference between running this script and running ``make`` by hand is that
+   the script will exit immediately if it encounters an error or warning. This
+   is necessary for CI. If you made a lot of documentation changes, it is
+   much quicker to run ``make`` by hand so that you can see all of the warnings
+   at once.
+
 If you are editing the documentation, you should obviously be running the
 documentation tests. But even if you are simply adding a new package, your
 changes could cause the documentation tests to fail:

lib/spack/docs/developer_guide.rst

@@ -1,4 +1,4 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
@@ -107,9 +107,10 @@ with a high level view of Spack's directory structure:
             llnl/          <- some general-use libraries
 
             spack/                <- spack module; contains Python code
-               build_systems/     <- modules for different build systems
+               analyzers/         <- modules to run analysis on installed packages
+               build_systems/     <- modules for different build systems 
                cmd/               <- each file in here is a spack subcommand
-               compilers/         <- compiler description files
+               compilers/         <- compiler description files          
                container/         <- module for spack containerize
                hooks/             <- hook modules to run at different points
                modules/           <- modules for lmod, tcl, etc.
@@ -149,21 +150,25 @@ grouped by functionality.
 Package-related modules
 ^^^^^^^^^^^^^^^^^^^^^^^
 
-:mod:`spack.package_base`
-  Contains the :class:`~spack.package_base.PackageBase` class, which
-  is the superclass for all packages in Spack.
+:mod:`spack.package`
+  Contains the :class:`Package <spack.package.Package>` class, which
+  is the superclass for all packages in Spack.  Methods on ``Package``
+  implement all phases of the :ref:`package lifecycle
+  <package-lifecycle>` and manage the build process.
 
-:mod:`spack.util.naming`
-  Contains functions for mapping between Spack package names,
-  Python module names, and Python class names. Functions like
-  :func:`~spack.util.naming.mod_to_class` handle mapping package
-  module names to class names.
+:mod:`spack.packages`
+  Contains all of the packages in Spack and methods for managing them.
+  Functions like :func:`packages.get <spack.packages.get>` and
+  :func:`class_name_for_package_name
+  <packages.class_name_for_package_name>` handle mapping package module
+  names to class names and dynamically instantiating packages by name
+  from module files.
 
-:mod:`spack.directives`
-  *Directives* are functions that can be called inside a package definition
-  to modify the package, like :func:`~spack.directives.depends_on`
-  and :func:`~spack.directives.provides`.  See :ref:`dependencies`
-  and :ref:`virtual-dependencies`.
+:mod:`spack.relations`
+  *Relations* are relationships between packages, like
+  :func:`depends_on <spack.relations.depends_on>` and :func:`provides
+  <spack.relations.provides>`.  See :ref:`dependencies` and
+  :ref:`virtual-dependencies`.
 
 :mod:`spack.multimethod`
   Implementation of the :func:`@when <spack.multimethod.when>`
@@ -175,27 +180,31 @@ Spec-related modules
 ^^^^^^^^^^^^^^^^^^^^
 
 :mod:`spack.spec`
-  Contains :class:`~spack.spec.Spec` and :class:`~spack.spec.SpecParser`.
-  Also implements most of the logic for normalization and concretization
-  of specs.
+  Contains :class:`Spec <spack.spec.Spec>` and :class:`SpecParser
+  <spack.spec.SpecParser>`. Also implements most of the logic for
+  normalization and concretization of specs.
 
 :mod:`spack.parse`
   Contains some base classes for implementing simple recursive descent
-  parsers: :class:`~spack.parse.Parser` and :class:`~spack.parse.Lexer`.
-  Used by :class:`~spack.spec.SpecParser`.
+  parsers: :class:`Parser <spack.parse.Parser>` and :class:`Lexer
+  <spack.parse.Lexer>`.  Used by :class:`SpecParser
+  <spack.spec.SpecParser>`.
 
 :mod:`spack.concretize`
-  Contains :class:`~spack.concretize.Concretizer` implementation,
-  which allows site administrators to change Spack's :ref:`concretization-policies`.
+  Contains :class:`DefaultConcretizer
+  <spack.concretize.DefaultConcretizer>` implementation, which allows
+  site administrators to change Spack's :ref:`concretization-policies`.
 
 :mod:`spack.version`
-  Implements a simple :class:`~spack.version.Version` class with simple
-  comparison semantics.  Also implements :class:`~spack.version.VersionRange`
-  and :class:`~spack.version.VersionList`. All three are comparable with each
-  other and offer union and intersection operations. Spack uses these classes
-  to compare versions and to manage version constraints on specs. Comparison
-  semantics are similar to the ``LooseVersion`` class in ``distutils`` and to
-  the way RPM compares version strings.
+  Implements a simple :class:`Version <spack.version.Version>` class
+  with simple comparison semantics.  Also implements
+  :class:`VersionRange <spack.version.VersionRange>` and
+  :class:`VersionList <spack.version.VersionList>`.  All three are
+  comparable with each other and offer union and intersection
+  operations.  Spack uses these classes to compare versions and to
+  manage version constraints on specs.  Comparison semantics are
+  similar to the ``LooseVersion`` class in ``distutils`` and to the
+  way RPM compares version strings.
 
 :mod:`spack.compilers`
   Submodules contains descriptors for all valid compilers in Spack.
@@ -207,6 +216,15 @@ Spec-related modules
      but compilers aren't fully integrated with the build process
      yet.
 
+:mod:`spack.architecture`
+  :func:`architecture.sys_type <spack.architecture.sys_type>` is used
+  to determine the host architecture while building.
+
+  .. warning::
+
+     Not yet implemented.  Should eventually have architecture
+     descriptions for cross-compiling.
+
 ^^^^^^^^^^^^^^^^^
 Build environment
 ^^^^^^^^^^^^^^^^^
@@ -214,7 +232,7 @@ Build environment
 :mod:`spack.stage`
   Handles creating temporary directories for builds.
 
-:mod:`spack.build_environment`
+:mod:`spack.compilation`
   This contains utility functions used by the compiler wrapper script,
   ``cc``.
 
@@ -239,6 +257,25 @@ Unit tests
   Implements Spack's test suite.  Add a module and put its name in
   the test suite in ``__init__.py`` to add more unit tests.
 
+:mod:`spack.test.mock_packages`
+  This is a fake package hierarchy used to mock up packages for
+  Spack's test suite.
+
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+Research and Monitoring Modules
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+:mod:`spack.monitor`
+  Contains :class:`SpackMonitor <spack.monitor.SpackMonitor>`. This is accessed
+  from the ``spack install`` and ``spack analyze`` commands to send build
+  and package metadada up to a `Spack Monitor <https://github.com/spack/spack-monitor>`_ server. 
+
+
+:mod:`spack.analyzers`
+  A module folder with a :class:`AnalyzerBase <spack.analyzers.analyzer_base.AnalyzerBase>`
+  that provides base functions to run, save, and (optionally) upload analysis
+  results to a `Spack Monitor <https://github.com/spack/spack-monitor>`_ server.
+
 
 ^^^^^^^^^^^^^
 Other Modules
@@ -249,7 +286,7 @@ Other Modules
   tarball URLs.
 
 :mod:`spack.error`
-  :class:`~spack.error.SpackError`, the base class for
+  :class:`SpackError <spack.error.SpackError>`, the base class for
   Spack's exception hierarchy.
 
 :mod:`llnl.util.tty`
@@ -282,6 +319,240 @@ Most spack commands look something like this:
 The information in Package files is used at all stages in this
 process.
 
+Conceptually, packages are overloaded.  They contain:
+
+-------------
+Stage objects
+-------------
+
+
+.. _writing-analyzers:
+
+-----------------
+Writing analyzers
+-----------------
+
+To write an analyzer, you should add a new python file to the
+analyzers module directory at ``lib/spack/spack/analyzers`` .
+Your analyzer should be a subclass of the :class:`AnalyzerBase <spack.analyzers.analyzer_base.AnalyzerBase>`. For example, if you want
+to add an analyzer class ``Myanalyzer`` you woul write to 
+``spack/analyzers/myanalyzer.py`` and import and 
+use the base as follows:
+
+.. code-block:: python
+
+    from .analyzer_base import AnalyzerBase
+
+    class Myanalyzer(AnalyzerBase):
+
+
+Note that the class name is your module file name, all lowercase
+except for the first capital letter. You can  look at other analyzers in 
+that analyzer directory for examples. The guide here will tell you about the basic functions needed.
+
+^^^^^^^^^^^^^^^^^^^^^^^^^
+Analyzer Output Directory
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+By default, when you run ``spack analyze run`` an analyzer output directory will
+be created in your spack user directory in your ``$HOME``. The reason we output here
+is because the install directory might not always be writable. 
+
+.. code-block:: console
+
+    ~/.spack/
+      analyzers
+      
+Result files will be written here, organized in subfolders in the same structure
+as the package, with each analyzer owning it's own subfolder. for example:
+
+
+.. code-block:: console
+
+    $ tree ~/.spack/analyzers/
+    /home/spackuser/.spack/analyzers/
+    └── linux-ubuntu20.04-skylake
+        └── gcc-9.3.0
+            └── zlib-1.2.11-sl7m27mzkbejtkrajigj3a3m37ygv4u2
+                ├── environment_variables
+                │   └── spack-analyzer-environment-variables.json
+                ├── install_files
+                │   └── spack-analyzer-install-files.json
+                └── libabigail
+                    └── lib
+                        └── spack-analyzer-libabigail-libz.so.1.2.11.xml 
+
+
+Notice that for the libabigail analyzer, since results are generated per object,
+we honor the object's folder in case there are equivalently named files in 
+different folders. The result files are typically written as json so they can be easily read and  uploaded in a future interaction with a monitor.
+
+
+^^^^^^^^^^^^^^^^^
+Analyzer Metadata
+^^^^^^^^^^^^^^^^^
+
+Your analyzer is required to have the class attributes ``name``, ``outfile``,
+and ``description``. These are printed to the user with they use the subcommand
+``spack analyze list-analyzers``.  Here is an example.
+As we mentioned above, note that this analyzer would live in a module named
+``libabigail.py`` in the analyzers folder so that the class can be discovered.
+
+
+.. code-block:: python
+
+    class Libabigail(AnalyzerBase):
+
+        name = "libabigail"
+        outfile = "spack-analyzer-libabigail.json"
+        description = "Application Binary Interface (ABI) features for objects"
+
+
+This means that the name and output file should be unique for your analyzer.
+Note that "all" cannot be the name of an analyzer, as this key is used to indicate
+that the user wants to run all analyzers.
+
+.. _analyzer_run_function:
+
+
+^^^^^^^^^^^^^^^^^^^^^^^^
+An analyzer run Function
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+The core of an analyzer is its ``run()`` function, which should accept no
+arguments. You can assume your analyzer has the package spec of interest at ``self.spec``
+and it's up to the run function to generate whatever analysis data you need,
+and then return the object with a key as the analyzer name. The result data
+should be a list of objects, each with a name, ``analyzer_name``, ``install_file``,
+and one of ``value`` or ``binary_value``. The install file should be for a relative
+path, and not the absolute path. For example, let's say we extract a metric called
+``metric`` for ``bin/wget`` using our analyzer ``thebest-analyzer``. 
+We might have data that looks like this:
+
+.. code-block:: python
+
+    result = {"name": "metric", "analyzer_name": "thebest-analyzer", "value": "1", "install_file": "bin/wget"}
+
+
+We'd then return it as follows - note that they key is the analyzer name at ``self.name``.
+
+.. code-block:: python
+
+    return {self.name: result}
+
+This will save the complete result to the analyzer metadata folder, as described
+previously. If you want support for adding a different kind of metadata (e.g.,
+not associated with an install file) then the monitor server would need to be updated
+to support this first.
+
+
+^^^^^^^^^^^^^^^^^^^^^^^^^
+An analyzer init Function
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+If you don't need any extra dependencies or checks, you can skip defining an analyzer
+init function, as the base class will handle it. Typically, it will accept
+a spec, and an optional output directory (if the user does not want the default
+metadata folder for analyzer results). The analyzer init function should call
+it's parent init, and then do any extra checks or validation that are required to
+work. For example:
+
+.. code-block:: python
+
+    def __init__(self, spec, dirname=None):
+        super(Myanalyzer, self).__init__(spec, dirname)
+
+        # install extra dependencies, do extra preparation and checks here
+
+
+At the end of the init, you will have available to you:
+
+ - **self.spec**: the spec object
+ - **self.dirname**: an optional directory name the user as provided at init to save
+ - **self.output_dir**: the analyzer metadata directory, where we save by default
+ - **self.meta_dir**: the path to the package metadata directory (.spack) if you need it
+
+And can proceed to write your analyzer.
+
+
+^^^^^^^^^^^^^^^^^^^^^^^
+Saving Analyzer Results
+^^^^^^^^^^^^^^^^^^^^^^^
+
+The analyzer will have ``save_result`` called, with the result object generated
+to save it to the filesystem, and if the user has added the ``--monitor`` flag
+to upload it to a monitor server. If your result follows an accepted result
+format and you don't need to parse it further, you don't need to add this 
+function to your class. However, if your result data is large or otherwise
+needs additional parsing, you can define it. If you define the function, it
+is useful to know about the ``output_dir`` property, which you can join
+with your output file relative path of choice:
+
+.. code-block:: python
+
+    outfile = os.path.join(self.output_dir, "my-output-file.txt")
+
+
+The directory will be provided by the ``output_dir`` property but it won't exist,
+so you should create it:
+
+
+.. code::block:: python
+
+    # Create the output directory
+    if not os.path.exists(self._output_dir):
+        os.makedirs(self._output_dir)
+
+
+If you are generating results that match to specific files in the package
+install directory, you should try to maintain those paths in the case that
+there are equivalently named files in different directories that would
+overwrite one another. As an example of an analyzer with a custom save,
+the Libabigail analyzer saves ``*.xml`` files to the analyzer metadata
+folder in ``run()``, as they are either binaries, or as xml (text) would
+usually be too big to pass in one request. For this reason, the files
+are saved during ``run()`` and the filenames added to the result object,
+and then when the result object is passed back into ``save_result()``,
+we skip saving to the filesystem, and instead read the file and send
+each one (separately) to the monitor:
+
+
+.. code-block:: python
+
+    def save_result(self, result, monitor=None, overwrite=False):
+        """ABI results are saved to individual files, so each one needs to be
+        read and uploaded. Result here should be the lookup generated in run(),
+        the key is the analyzer name, and each value is the result file.
+        We currently upload the entire xml as text because libabigail can't
+        easily read gzipped xml, but this will be updated when it can.
+        """
+        if not monitor:
+            return
+
+        name = self.spec.package.name
+
+        for obj, filename in result.get(self.name, {}).items():
+
+            # Don't include the prefix
+            rel_path = obj.replace(self.spec.prefix + os.path.sep, "")
+
+            # We've already saved the results to file during run
+            content = spack.monitor.read_file(filename)
+
+            # A result needs an analyzer, value or binary_value, and name
+            data = {"value": content, "install_file": rel_path, "name": "abidw-xml"}
+            tty.info("Sending result for %s %s to monitor." % (name, rel_path))
+            monitor.send_analyze_metadata(self.spec.package, {"libabigail": [data]})
+
+
+
+Notice that this function, if you define it, requires a result object (generated by
+``run()``, a monitor (if you want to send), and a boolean ``overwrite`` to be used
+to check if a result exists first, and not write to it if the result exists and 
+overwrite is False. Also notice that since we already saved these files to the analyzer metadata folder, we return early if a monitor isn't defined, because this function serves to send  results to the monitor. If you haven't saved anything to the analyzer metadata folder
+yet, you might want to do that here. You should also use ``tty.info`` to give
+the user a message of "Writing result to $DIRNAME."
+
 
 .. _writing-commands:
 
@@ -345,7 +616,7 @@ types of hooks in the ``__init__.py``, and then python files in that folder
 can use hook functions. The files are automatically parsed, so if you write
 a new file for some integration (e.g., ``lib/spack/spack/hooks/myintegration.py``
 you can then write hook functions in that file that will be automatically detected,
-and run whenever your hook is called. This section will cover the basic kind
+and run whenever your hook is called. This section will cover the basic kind 
 of hooks, and how to write them.
 
 ^^^^^^^^^^^^^^
@@ -353,7 +624,7 @@ Types of Hooks
 ^^^^^^^^^^^^^^
 
 The following hooks are currently implemented to make it easy for you,
-the developer, to add hooks at different stages of a spack install or similar.
+the developer, to add hooks at different stages of a spack install or similar. 
 If there is a hook that you would like and is missing, you can propose to add a new one.
 
 """""""""""""""""""""
@@ -361,9 +632,9 @@ If there is a hook that you would like and is missing, you can propose to add a
 """""""""""""""""""""
 
 A ``pre_install`` hook is run within an install subprocess, directly before
-the install starts. It expects a single argument of a spec, and is run in
+the install starts. It expects a single argument of a spec, and is run in 
 a multiprocessing subprocess. Note that if you see ``pre_install`` functions associated with packages these are not hooks
-as we have defined them here, but rather callback functions associated with
+as we have defined them here, but rather callback functions associated with 
 a package install.
 
 
@@ -386,7 +657,7 @@ here.
 This hook is run at the beginning of ``lib/spack/spack/installer.py``,
 in the install function of a ``PackageInstaller``,
 and importantly is not part of a build process, but before it. This is when
-we have just newly grabbed the task, and are preparing to install. If you
+we have just newly grabbed the task, and are preparing to install. If you 
 write a hook of this type, you should provide the spec to it.
 
 .. code-block:: python
@@ -395,7 +666,7 @@ write a hook of this type, you should provide the spec to it.
         """On start of an install, we want to...
         """
         print('on_install_start')
-
+    
 
 """"""""""""""""""""""""""""
 ``on_install_success(spec)``
@@ -418,13 +689,6 @@ If you need to write a hook that is relevant to a failure within a build
 process, you would want to instead use ``on_phase_failure``.
 
 
-"""""""""""""""""""""""""""
-``on_install_cancel(spec)``
-"""""""""""""""""""""""""""
-
-The same, but triggered if a spec install is cancelled for any reason.
-
-
 """""""""""""""""""""""""""""""""""""""""""""""
 ``on_phase_success(pkg, phase_name, log_file)``
 """""""""""""""""""""""""""""""""""""""""""""""
@@ -446,6 +710,23 @@ with a hook, and this is the purpose of this particular hook. Akin to
 ``on_phase_success`` we require the same variables - the package that failed,
 the name of the phase, and the log file where we might find errors.
 
+"""""""""""""""""""""""""""""""""
+``on_analyzer_save(pkg, result)``
+"""""""""""""""""""""""""""""""""
+
+After an analyzer has saved some result for a package, this hook is called,
+and it provides the package that we just ran the analysis for, along with
+the loaded result. Typically, a result is structured to have the name
+of the analyzer as key, and the result object that is defined in detail in
+:ref:`analyzer_run_function`.
+
+.. code-block:: python
+
+    def on_analyzer_save(pkg, result):
+        """given a package and a result...
+        """
+        print('Do something extra with a package analysis result here')
+
 
 ^^^^^^^^^^^^^^^^^^^^^^
 Adding a New Hook Type
@@ -463,8 +744,8 @@ to trigger after anything is written to a logger. You would add it as follows:
     post_install = HookRunner('post_install')
 
     # hooks related to logging
-    post_log_write = HookRunner('post_log_write') # <- here is my new hook!
-
+    post_log_write = HookRunner('post_log_write') # <- here is my new hook! 
+    
 
 You then need to decide what arguments my hook would expect. Since this is
 related to logging, let's say that you want a message and level. That means
@@ -494,7 +775,7 @@ In this example, we use it outside of a logger that is already defined:
 
 This is not to say that this would be the best way to implement an integration
 with the logger (you'd probably want to write a custom logger, or you could
-have the hook defined within the logger) but serves as an example of writing a hook.
+have the hook defined within the logger) but serves as an example of writing a hook. 
 
 ----------
 Unit tests
@@ -504,38 +785,6 @@ Unit tests
 Unit testing
 ------------
 
----------------------
-Developer environment
----------------------
-
-.. warning::
-
-    This is an experimental feature. It is expected to change and you should
-    not use it in a production environment.
-
-
-When installing a package, we currently have support to export environment
-variables to specify adding debug flags to the build. By default, a package
-install will build without any debug flag. However, if you want to add them,
-you can export:
-
-.. code-block:: console
-
-   export SPACK_ADD_DEBUG_FLAGS=true
-   spack install zlib
-
-
-If you want to add custom flags, you should export an additional variable:
-
-.. code-block:: console
-
-   export SPACK_ADD_DEBUG_FLAGS=true
-   export SPACK_DEBUG_FLAGS="-g"
-   spack install zlib
-
-These environment variables will eventually be integrated into spack so
-they are set from the command line.
-
 ------------------
 Developer commands
 ------------------
@@ -546,29 +795,6 @@ Developer commands
 ``spack doc``
 ^^^^^^^^^^^^^
 
-.. _cmd-spack-style:
-
-^^^^^^^^^^^^^^^
-``spack style``
-^^^^^^^^^^^^^^^
-
-spack style exists to help the developer user to check imports and style with
-mypy, flake8, isort, and (soon) black. To run all style checks, simply do:
-
-.. code-block:: console
-
-    $ spack style
-
-To run automatic fixes for isort you can do:
-
-.. code-block:: console
-
-    $ spack style --fix
-
-You do not need any of these Python packages installed on your system for
-the checks to work! Spack will bootstrap install them from packages for
-your use.
-
 ^^^^^^^^^^^^^^^^^^^
 ``spack unit-test``
 ^^^^^^^^^^^^^^^^^^^
@@ -647,7 +873,7 @@ just like you would with the normal ``python`` command.
 ^^^^^^^^^^^^^^^
 
 Spack blame is a way to quickly see contributors to packages or files
-in the spack repository. You should provide a target package name or
+in the spack repository. You should provide a target package name or 
 file name to the command. Here is an example asking to see contributions
 for the package "python":
 
@@ -657,8 +883,8 @@ for the package "python":
     LAST_COMMIT  LINES  %      AUTHOR            EMAIL
     2 weeks ago  3      0.3    Mickey Mouse   <cheddar@gmouse.org>
     a month ago  927    99.7   Minnie Mouse   <swiss@mouse.org>
-
-    2 weeks ago  930    100.0
+                                        
+    2 weeks ago  930    100.0  
 
 
 By default, you will get a table view (shown above) sorted by date of contribution,
@@ -787,39 +1013,39 @@ Release branches
 ^^^^^^^^^^^^^^^^
 
 There are currently two types of Spack releases: :ref:`major releases
-<major-releases>` (``0.17.0``, ``0.18.0``, etc.) and :ref:`point releases
-<point-releases>` (``0.17.1``, ``0.17.2``, ``0.17.3``, etc.). Here is a
+<major-releases>` (``0.13.0``, ``0.14.0``, etc.) and :ref:`point releases
+<point-releases>` (``0.13.1``, ``0.13.2``, ``0.13.3``, etc.). Here is a
 diagram of how Spack release branches work::
 
-    o    branch: develop  (latest version, v0.19.0.dev0)
+    o    branch: develop  (latest version)
     |
-    o
-    | o  branch: releases/v0.18, tag: v0.18.1
-    o |
-    | o  tag: v0.18.0
-    o |
-    | o
+    o    merge v0.14.1 into develop
+    |\
+    | o  branch: releases/v0.14, tag: v0.14.1
+    o |  merge v0.14.0 into develop
+    |\|
+    | o  tag: v0.14.0
     |/
-    o
-    |
-    o
-    | o  branch: releases/v0.17, tag: v0.17.2
-    o |
-    | o  tag: v0.17.1
-    o |
-    | o  tag: v0.17.0
+    o    merge v0.13.2 into develop
+    |\
+    | o  branch: releases/v0.13, tag: v0.13.2
+    o |  merge v0.13.1 into develop
+    |\|
+    | o  tag: v0.13.1
+    o |  merge v0.13.0 into develop
+    |\|
+    | o  tag: v0.13.0
     o |
     | o
     |/
     o
 
 The ``develop`` branch has the latest contributions, and nearly all pull
-requests target ``develop``. The ``develop`` branch will report that its
-version is that of the next **major** release with a ``.dev0`` suffix.
+requests target ``develop``.
 
 Each Spack release series also has a corresponding branch, e.g.
-``releases/v0.18`` has ``0.18.x`` versions of Spack, and
-``releases/v0.17`` has ``0.17.x`` versions. A major release is the first
+``releases/v0.14`` has ``0.14.x`` versions of Spack, and
+``releases/v0.13`` has ``0.13.x`` versions. A major release is the first
 tagged version on a release branch. Minor releases are back-ported from
 develop onto release branches. This is typically done by cherry-picking
 bugfix commits off of ``develop``.
@@ -830,20 +1056,12 @@ packages. They should generally only contain fixes to the Spack core.
 However, sometimes priorities are such that new functionality needs to
 be added to a minor release.
 
-Both major and minor releases are tagged. As a convenience, we also tag
-the latest release as ``releases/latest``, so that users can easily check
-it out to get the latest stable version. See :ref:`updating-latest-release`
-for more details.
-
-.. note::
-
-   Older spack releases were merged **back** into develop so that we could
-   do fancy things with tags, but since tarballs and many git checkouts do
-   not have tags, this proved overly complex and confusing.
-
-   We have since converted to using `PEP 440 <https://peps.python.org/pep-0440/>`_
-   compliant versions.  `See here <https://github.com/spack/spack/pull/25267>`_ for
-   details.
+Both major and minor releases are tagged. After each release, we merge
+the release branch back into ``develop`` so that the version bump and any
+other release-specific changes are visible in the mainline. As a
+convenience, we also tag the latest release as ``releases/latest``,
+so that users can easily check it out to get the latest
+stable version. See :ref:`merging-releases` for more details.
 
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 Scheduling work for releases
@@ -901,11 +1119,10 @@ completed, the steps to make the major release are:
    ``releases/vX.Y``. That is, you should create a ``releases/vX.Y``
    branch if you are preparing the ``X.Y.0`` release.
 
-#. Remove the ``dev0`` development release segment from the version tuple in
-   ``lib/spack/spack/__init__.py``.
+#. Bump the version in ``lib/spack/spack/__init__.py``.
 
-   The version number itself should already be correct and should not be
-   modified.
+   See `this example from 0.13.0
+   <https://github.com/spack/spack/commit/8eeb64096c98b8a43d1c587f13ece743c864fba9>`_
 
 #. Update ``CHANGELOG.md`` with major highlights in bullet form.
 
@@ -923,20 +1140,9 @@ completed, the steps to make the major release are:
    If CI is not passing, submit pull requests to ``develop`` as normal
    and keep rebasing the release branch on ``develop`` until CI passes.
 
-#. Make sure the entire documentation is up to date. If documentation
-   is outdated submit pull requests to ``develop`` as normal
-   and keep rebasing the release branch on ``develop``.
-
-#. Bump the major version in the ``develop`` branch.
-
-   Create a pull request targeting the ``develop`` branch, bumping the major
-   version in ``lib/spack/spack/__init__.py`` with a ``dev0`` release segment.
-   For instance when you have just released ``v0.15.0``, set the version
-   to ``(0, 16, 0, 'dev0')`` on ``develop``.
-
 #. Follow the steps in :ref:`publishing-releases`.
 
-#. Follow the steps in :ref:`updating-latest-release`.
+#. Follow the steps in :ref:`merging-releases`.
 
 #. Follow the steps in :ref:`announcing-releases`.
 
@@ -963,13 +1169,8 @@ completed, the steps to make the point release are:
 
       $ git checkout releases/v0.15
 
-#. If a pull request to the release branch named ``Backports vX.Y.Z`` is not already
-   in the project, create it. This pull request ought to be created as early as
-   possible when working on a release project, so that we can build the release
-   commits incrementally, and identify potential conflicts at an early stage.
-
 #. Cherry-pick each pull request in the ``Done`` column of the release
-   project board onto the ``Backports vX.Y.Z`` pull request.
+   project board onto the release branch.
 
    This is **usually** fairly simple since we squash the commits from the
    vast majority of pull requests. That means there is only one commit
@@ -994,7 +1195,7 @@ completed, the steps to make the point release are:
 
       It is important to cherry-pick commits in the order they happened,
       otherwise you can get conflicts while cherry-picking. When
-      cherry-picking look at the merge date,
+      cherry-picking onto a point release, look at the merge date,
       **not** the number of the pull request or the date it was opened.
 
       Sometimes you may **still** get merge conflicts even if you have
@@ -1015,19 +1216,18 @@ completed, the steps to make the point release are:
          branch if neither of the above options makes sense, but this can
          require a lot of work. It's seldom the right choice.
 
-#. When all the commits from the project board are cherry-picked into
-   the ``Backports vX.Y.Z`` pull request, you can push a commit to:
+#. Bump the version in ``lib/spack/spack/__init__.py``.
 
-   1. Bump the version in ``lib/spack/spack/__init__.py``.
-   2. Update ``CHANGELOG.md`` with a list of the changes.
+   See `this example from 0.14.1
+   <https://github.com/spack/spack/commit/ff0abb9838121522321df2a054d18e54b566b44a>`_.
+
+#. Update ``CHANGELOG.md`` with a list of the changes.
 
    This is typically a summary of the commits you cherry-picked onto the
    release branch. See `the changelog from 0.14.1
    <https://github.com/spack/spack/commit/ff0abb9838121522321df2a054d18e54b566b44a>`_.
 
-#. Merge the ``Backports vX.Y.Z`` PR with the **Rebase and merge** strategy. This
-   is needed to keep track in the release branch of all the commits that were
-   cherry-picked.
+#. Push the release branch to GitHub.
 
 #. Make sure CI passes on the release branch, including:
 
@@ -1042,12 +1242,10 @@ completed, the steps to make the point release are:
 
 #. Follow the steps in :ref:`publishing-releases`.
 
-#. Follow the steps in :ref:`updating-latest-release`.
+#. Follow the steps in :ref:`merging-releases`.
 
 #. Follow the steps in :ref:`announcing-releases`.
 
-#. Submit a PR to update the CHANGELOG in the `develop` branch
-   with the addition of this point release.
 
 .. _publishing-releases:
 
@@ -1057,7 +1255,7 @@ Publishing a release on GitHub
 
 #. Create the release in GitHub.
 
-   * Go to
+   * Go to 
      `github.com/spack/spack/releases <https://github.com/spack/spack/releases>`_
      and click ``Draft a new release``.
 
@@ -1105,11 +1303,11 @@ Publishing a release on GitHub
    selectable in the versions menu.
 
 
-.. _updating-latest-release:
+.. _merging-releases:
 
-^^^^^^^^^^^^^^^^^^^^^^^^^^
-Updating `releases/latest`
-^^^^^^^^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+Updating `releases/latest` and `develop`
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 If the new release is the **highest** Spack release yet, you should
 also tag it as ``releases/latest``. For example, suppose the highest
@@ -1133,6 +1331,40 @@ To tag ``releases/latest``, do this:
 The ``--force`` argument to ``git tag`` makes ``git`` overwrite the existing
 ``releases/latest`` tag with the new one.
 
+We also merge each release that we tag as ``releases/latest`` into ``develop``.
+Make sure to do this with a merge commit:
+
+.. code-block:: console
+
+   $ git checkout develop
+   $ git merge --no-ff -s ours vX.Y.Z  # vX.Y.Z is the new release's tag
+   $ git push
+
+We merge back to ``develop`` because it:
+
+  * updates the version and ``CHANGELOG.md`` on ``develop``; and
+  * ensures that your release tag is reachable from the head of
+    ``develop``.
+
+We *must* use a real merge commit (via the ``--no-ff`` option) to
+ensure that the release tag is reachable from the tip of ``develop``.
+This is necessary for ``spack -V`` to work properly -- it uses ``git
+describe --tags`` to find the last reachable tag in the repository and
+reports how far we are from it. For example:
+
+.. code-block:: console
+
+   $ spack -V
+   0.14.2-1486-b80d5e74e5
+
+This says that we are at commit ``b80d5e74e5``, which is 1,486 commits
+ahead of the ``0.14.2`` release.
+
+We put this step last in the process because it's best to do it only once
+the release is complete and tagged. If you do it before you've tagged the
+release and later decide you want to tag some later commit, you'll need
+to merge again.
+
 
 .. _announcing-releases:
 

lib/spack/docs/environments.rst

@@ -1,13 +1,13 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
 
 .. _environments:
 
-=========================
-Environments (spack.yaml)
-=========================
+============
+Environments
+============
 
 An environment is used to group together a set of specs for the
 purpose of building, rebuilding and deploying in a coherent fashion.
@@ -233,8 +233,8 @@ packages will be listed as roots of the Environment.
 
 All of the Spack commands that act on the list of installed specs are
 Environment-sensitive in this way, including ``install``,
-``uninstall``, ``find``, ``extensions``, and more. In the
-:ref:`environment-configuration` section we will discuss
+``uninstall``, ``activate``, ``deactivate``, ``find``, ``extensions``,
+and more. In the :ref:`environment-configuration` section we will discuss
 Environment-sensitive commands further.
 
 ^^^^^^^^^^^^^^^^^^^^^
@@ -273,9 +273,19 @@ or
 Concretizing
 ^^^^^^^^^^^^
 
-Once some user specs have been added to an environment, they can be concretized.
-There are at the moment three different modes of operation to concretize an environment,
-which are explained in details in :ref:`environments_concretization_config`.
+Once some user specs have been added to an environment, they can be
+concretized. *By default specs are concretized separately*, one after
+the other. This mode of operation permits to deploy a full
+software stack where multiple configurations of the same package
+need to be installed alongside each other. Central installations done
+at HPC centers by system administrators or user support groups
+are a common case that fits in this behavior.
+Environments *can also be configured to concretize all
+the root specs in a self-consistent way* to ensure that
+each package in the environment comes with a single configuration. This
+mode of operation is usually what is required by software developers that
+want to deploy their development environment.
+
 Regardless of which mode of operation has been chosen, the following
 command will ensure all the root specs are concretized according to the
 constraints that are prescribed in the configuration:
@@ -339,24 +349,6 @@ If the Environment has been concretized, Spack will install the
 concretized specs. Otherwise, ``spack install`` will first concretize
 the Environment and then install the concretized specs.
 
-.. note::
-
-   Every ``spack install`` process builds one package at a time with multiple build
-   jobs, controlled by the ``-j`` flag and the ``config:build_jobs`` option
-   (see :ref:`build-jobs`). To speed up environment builds further, independent
-   packages can be installed in parallel by launching more Spack instances. For
-   example, the following will build at most four packages in parallel using
-   three background jobs: 
-
-   .. code-block:: console
-
-      [myenv]$ spack install & spack install & spack install & spack install
-
-   Another option is to generate a ``Makefile`` and run ``make -j<N>`` to control
-   the number of parallel install processes. See :ref:`env-generate-depfile`
-   for details.
-
-
 As it installs, ``spack install`` creates symbolic links in the
 ``logs/`` directory in the Environment, allowing for easy inspection
 of build logs related to that environment. The ``spack install``
@@ -376,30 +368,6 @@ from being added again.  At the same time, a spec that already exists in the
 environment, but only as a dependency, will be added to the environment as a
 root spec without the ``--no-add`` option.
 
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Developing Packages in a Spack Environment
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-The ``spack develop`` command allows one to develop Spack packages in
-an environment. It requires a spec containing a concrete version, and
-will configure Spack to install the package from local source. By
-default, it will also clone the package to a subdirectory in the
-environment. This package will have a special variant ``dev_path``
-set, and Spack will ensure the package and its dependents are rebuilt
-any time the environment is installed if the package's local source
-code has been modified. Spack ensures that all instances of a
-developed package in the environment are concretized to match the
-version (and other constraints) passed as the spec argument to the
-``spack develop`` command.
-
-For packages with ``git`` attributes, git branches, tags, and commits can
-also be used as valid concrete versions (see :ref:`version-specifier`).
-This means that for a package ``foo``, ``spack develop foo@git.main`` will clone 
-the ``main`` branch of the package, and ``spack install`` will install from
-that git clone if ``foo`` is in the environment.
-Further development on ``foo`` can be tested by reinstalling the environment,
-and eventually committed and pushed to the upstream git repo.
-
 ^^^^^^^
 Loading
 ^^^^^^^
@@ -416,11 +384,18 @@ Sourcing that file in Bash will make the environment available to the
 user; and can be included in ``.bashrc`` files, etc.  The ``loads``
 file may also be copied out of the environment, renamed, etc.
 
+----------
+spack.yaml
+----------
+
+Spack environments can be customized at finer granularity by editing
+the ``spack.yaml`` manifest file directly.
+
 .. _environment-configuration:
 
-------------------------
+^^^^^^^^^^^^^^^^^^^^^^^^
 Configuring Environments
-------------------------
+^^^^^^^^^^^^^^^^^^^^^^^^
 
 A variety of Spack behaviors are changed through Spack configuration
 files, covered in more detail in the :ref:`configuration`
@@ -442,9 +417,9 @@ environment can be specified by ``env:NAME`` (to affect environment
 ``foo``, set ``--scope env:foo``). These commands will automatically
 manipulate configuration inline in the ``spack.yaml`` file.
 
-^^^^^^^^^^^^^^^^^^^^^
+"""""""""""""""""""""
 Inline configurations
-^^^^^^^^^^^^^^^^^^^^^
+"""""""""""""""""""""
 
 Inline Environment-scope configuration is done using the same yaml
 format as standard Spack configuration scopes, covered in the
@@ -465,9 +440,9 @@ a ``packages.yaml`` file) could contain:
 This configuration sets the default compiler for all packages to
 ``intel``.
 
-^^^^^^^^^^^^^^^^^^^^^^^
+"""""""""""""""""""""""
 Included configurations
-^^^^^^^^^^^^^^^^^^^^^^^
+"""""""""""""""""""""""
 
 Spack environments allow an ``include`` heading in their yaml
 schema. This heading pulls in external configuration files and applies
@@ -478,25 +453,18 @@ them to the Environment.
    spack:
      include:
      - relative/path/to/config.yaml
-     - https://github.com/path/to/raw/config/compilers.yaml
      - /absolute/path/to/packages.yaml
 
-Environments can include files or URLs. File paths can be relative or
-absolute. URLs include the path to the text for individual files or
-can be the path to a directory containing configuration files.
+Environments can include files with either relative or absolute
+paths. Inline configurations take precedence over included
+configurations, so you don't have to change shared configuration files
+to make small changes to an individual Environment. Included configs
+listed earlier will have higher precedence, as the included configs are
+applied in reverse order.
 
-^^^^^^^^^^^^^^^^^^^^^^^^
-Configuration precedence
-^^^^^^^^^^^^^^^^^^^^^^^^
-
-Inline configurations take precedence over included configurations, so
-you don't have to change shared configuration files to make small changes
-to an individual environment. Included configurations listed earlier will
-have higher precedence, as the included configs are applied in reverse order.
-
--------------------------------
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 Manually Editing the Specs List
--------------------------------
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 The list of abstract/root specs in the Environment is maintained in
 the ``spack.yaml`` manifest under the heading ``specs``.
@@ -514,88 +482,37 @@ Appending to this list in the yaml is identical to using the ``spack
 add`` command from the command line. However, there is more power
 available from the yaml file.
 
-.. _environments_concretization_config:
-
-^^^^^^^^^^^^^^^^^^^
+"""""""""""""""""""
 Spec concretization
-^^^^^^^^^^^^^^^^^^^
-An environment can be concretized in three different modes and the behavior active under
-any environment is determined by the ``concretizer:unify`` configuration option.
+"""""""""""""""""""
 
-The *default* mode is to unify all specs:
+Specs can be concretized separately or together, as already
+explained in :ref:`environments_concretization`. The behavior active
+under any environment is determined by the ``concretization`` property:
 
 .. code-block:: yaml
 
    spack:
        specs:
-         - hdf5+mpi
-         - zlib@1.2.8
-       concretizer:
-         unify: true
+         - ncview
+         - netcdf
+         - nco
+         - py-sphinx
+       concretization: together
 
-This means that any package in the environment corresponds to a single concrete spec. In
-the above example, when ``hdf5`` depends down the line of ``zlib``, it is required to
-take ``zlib@1.2.8`` instead of a newer version. This mode of concretization is
-particularly useful when environment views are used: if every package occurs in
-only one flavor, it is usually possible to merge all install directories into a view.
-
-A downside of unified concretization is that it can be overly strict. For example, a
-concretization error would happen when both ``hdf5+mpi`` and ``hdf5~mpi`` are specified
-in an environment.
-
-The second mode is to *unify when possible*: this makes concretization of root specs
-more independendent. Instead of requiring reuse of dependencies across different root
-specs, it is only maximized:
-
-.. code-block:: yaml
-
-   spack:
-       specs:
-         - hdf5~mpi
-         - hdf5+mpi
-         - zlib@1.2.8
-       concretizer:
-         unify: when_possible
-
-This means that both ``hdf5`` installations will use ``zlib@1.2.8`` as a dependency even
-if newer versions of that library are available.
-
-The third mode of operation is to concretize root specs entirely independently by
-disabling unified concretization:
-
-.. code-block:: yaml
-
-   spack:
-       specs:
-         - hdf5~mpi
-         - hdf5+mpi
-         - zlib@1.2.8
-       concretizer:
-         unify: false
-
-In this example ``hdf5`` is concretized separately, and does not consider ``zlib@1.2.8``
-as a constraint or preference. Instead, it will take the latest possible version.
-
-The last two concretization options are typically useful for system administrators and
-user support groups providing a large software stack for their HPC center.
-
-.. note::
-
-   The ``concretizer:unify`` config option was introduced in Spack 0.18 to
-   replace the ``concretization`` property. For reference,
-   ``concretization: together`` is replaced by ``concretizer:unify:true``,
-   and ``concretization: separately`` is replaced by ``concretizer:unify:false``.
+which can currently take either one of the two allowed values ``together`` or ``separately``
+(the default).
 
 .. admonition:: Re-concretization of user specs
 
-   When using *unified* concretization (when possible), the entire set of specs will be
+   When concretizing specs together the entire set of specs will be
    re-concretized after any addition of new user specs, to ensure that
-   the environment remains consistent / minimal. When instead unified concretization is
-   disabled, only the new specs will be concretized after any addition.
+   the environment remains consistent. When instead the specs are concretized
+   separately only the new specs will be re-concretized after any addition.
 
-^^^^^^^^^^^^^
+"""""""""""""
 Spec Matrices
-^^^^^^^^^^^^^
+"""""""""""""
 
 Entries in the ``specs`` list can be individual abstract specs or a
 spec matrix.
@@ -630,9 +547,34 @@ The following two Environment manifests are identical:
 Spec matrices can be used to install swaths of software across various
 toolchains.
 
-^^^^^^^^^^^^^^^^^^^^
+The concretization logic for spec matrices differs slightly from the
+rest of Spack. If a variant or dependency constraint from a matrix is
+invalid, Spack will reject the constraint and try again without
+it. For example, the following two Environment manifests will produce
+the same specs:
+
+.. code-block:: yaml
+
+   spack:
+     specs:
+       - matrix:
+           - [zlib, libelf, hdf5+mpi]
+           - [^mvapich2@2.2, ^openmpi@3.1.0]
+
+   spack:
+     specs:
+       - zlib
+       - libelf
+       - hdf5+mpi ^mvapich2@2.2
+       - hdf5+mpi ^openmpi@3.1.0
+
+This allows one to create toolchains out of combinations of
+constraints and apply them somewhat indiscriminately to packages,
+without regard for the applicability of the constraint.
+
+""""""""""""""""""""
 Spec List References
-^^^^^^^^^^^^^^^^^^^^
+""""""""""""""""""""
 
 The last type of possible entry in the specs list is a reference.
 
@@ -732,9 +674,9 @@ The valid variables for a ``when`` clause are:
 #. ``hostname``. The hostname of the system (if ``hostname`` is an
    executable in the user's PATH).
 
-^^^^^^^^^^^^^^^^^^^^^^^^
+""""""""""""""""""""""""
 SpecLists as Constraints
-^^^^^^^^^^^^^^^^^^^^^^^^
+""""""""""""""""""""""""
 
 Dependencies and compilers in Spack can be both packages in an
 environment and constraints on other packages. References to SpecLists
@@ -766,41 +708,37 @@ For example, the following environment has three root packages:
 This allows for a much-needed reduction in redundancy between packages
 and constraints.
 
-----------------
-Filesystem Views
-----------------
+^^^^^^^^^^^^^^^^^^^^^^^^^
+Environment-managed Views
+^^^^^^^^^^^^^^^^^^^^^^^^^
 
-Spack Environments can define filesystem views, which provide a direct access point
-for software similar to the directory hierarchy that might exist under ``/usr/local``.
-Filesystem views are updated every time the environment is written out to the lock
-file ``spack.lock``, so the concrete environment and the view are always compatible.
-The files of the view's installed packages are brought into the view by symbolic or
-hard links, referencing the original Spack installation, or by copy.
+Spack Environments can define filesystem views of their software,
+which are maintained as packages and can be installed and uninstalled from
+the Environment. Filesystem views provide an access point for packages
+from the filesystem for users who want to access those packages
+directly. For more information on filesystem views, see the section
+:ref:`filesystem-views`.
+
+Spack Environment managed views are updated every time the environment
+is written out to the lock file ``spack.lock``, so the concrete
+environment and the view are always compatible.
 
 .. _configuring_environment_views:
 
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Configuration in ``spack.yaml``
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+"""""""""""""""""""""""""""""
+Configuring environment views
+"""""""""""""""""""""""""""""
 
 The Spack Environment manifest file has a top-level keyword
-``view``. Each entry under that heading is a **view descriptor**, headed
-by a name. Any number of views may be defined under the ``view`` heading.
-The view descriptor contains the root of the view, and
-optionally the projections for the view, ``select`` and
-``exclude`` lists for the view and link information via ``link`` and
-``link_type``.
-
-For example, in the following manifest
+``view``. Each entry under that heading is a view descriptor, headed
+by a name. The view descriptor contains the root of the view, and
+optionally the projections for the view, and ``select`` and
+``exclude`` lists for the view. For example, in the following manifest
 file snippet we define a view named ``mpis``, rooted at
 ``/path/to/view`` in which all projections use the package name,
 version, and compiler name to determine the path for a given
 package. This view selects all packages that depend on MPI, and
 excludes those built with the PGI compiler at version 18.5.
-The root specs with their (transitive) link and run type dependencies
-will be put in the view due to the  ``link: all`` option,
-and the files in the view will be symlinks to the spack install
-directories.
 
 .. code-block:: yaml
 
@@ -812,30 +750,15 @@ directories.
          select: [^mpi]
          exclude: ['%pgi@18.5']
          projections:
-           all: '{name}/{version}-{compiler.name}'
-         link: all
-         link_type: symlink
+           all: {name}/{version}-{compiler.name}
 
-The default for the ``select`` and
+For more information on using view projections, see the section on
+:ref:`adding_projections_to_views`. The default for the ``select`` and
 ``exclude`` values is to select everything and exclude nothing. The
-default projection is the default view projection (``{}``). The ``link``
-attribute allows the following values:
-
-#. ``link: all`` include root specs with their transitive run and link type
-   dependencies (default);
-#. ``link: run`` include root specs with their transitive run type dependencies;
-#. ``link: roots`` include root specs without their dependencies.
-
-The ``link_type`` defaults to ``symlink`` but can also take the value
-of ``hardlink`` or ``copy``.
-
-.. tip::
-
-   The option ``link: run`` can be used to create small environment views for
-   Python packages. Python will be able to import packages *inside* of the view even
-   when the environment is not activated, and linked libraries will be located
-   *outside* of the view thanks to rpaths.
+default projection is the default view projection (``{}``).
 
+Any number of views may be defined under the ``view`` heading in a
+Spack Environment.
 
 There are two shorthands for environments with a single view. If the
 environment at ``/path/to/env`` has a single view, with a root at
@@ -901,47 +824,9 @@ regenerate`` will regenerate the views for the environment. This will
 apply any updates in the environment configuration that have not yet
 been applied.
 
-.. _view_projections:
-
-""""""""""""""""
-View Projections
-""""""""""""""""
-The default projection into a view is to link every package into the
-root of the view. The projections attribute is a mapping of partial specs to
-spec format strings, defined by the :meth:`~spack.spec.Spec.format`
-function, as shown in the example below:
-
-.. code-block:: yaml
-
-   projections:
-     zlib: {name}-{version}
-     ^mpi: {name}-{version}/{^mpi.name}-{^mpi.version}-{compiler.name}-{compiler.version}
-     all: {name}-{version}/{compiler.name}-{compiler.version}
-
-The entries in the projections configuration file must all be either
-specs or the keyword ``all``. For each spec, the projection used will
-be the first non-``all`` entry that the spec satisfies, or ``all`` if
-there is an entry for ``all`` and no other entry is satisfied by the
-spec. Where the keyword ``all`` appears in the file does not
-matter.
-
-Given the example above, the spec ``zlib@1.2.8``
-will be linked into ``/my/view/zlib-1.2.8/``, the spec
-``hdf5@1.8.10+mpi %gcc@4.9.3 ^mvapich2@2.2`` will be linked into
-``/my/view/hdf5-1.8.10/mvapich2-2.2-gcc-4.9.3``, and the spec
-``hdf5@1.8.10~mpi %gcc@4.9.3`` will be linked into
-``/my/view/hdf5-1.8.10/gcc-4.9.3``.
-
-If the keyword ``all`` does not appear in the projections
-configuration file, any spec that does not satisfy any entry in the
-file will be linked into the root of the view as in a single-prefix
-view. Any entries that appear below the keyword ``all`` in the
-projections configuration file will not be used, as all specs will use
-the projection under ``all`` before reaching those entries.
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+""""""""""""""""""""""""""""
 Activating environment views
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+""""""""""""""""""""""""""""
 
 The ``spack env activate`` command will put the default view for the
 environment into the user's path, in addition to activating the
@@ -961,6 +846,9 @@ Variable            Paths
 PATH                bin
 MANPATH             man, share/man
 ACLOCAL_PATH        share/aclocal
+LD_LIBRARY_PATH     lib, lib64
+LIBRARY_PATH        lib, lib64
+CPATH               include
 PKG_CONFIG_PATH     lib/pkgconfig, lib64/pkgconfig, share/pkgconfig
 CMAKE_PREFIX_PATH   .
 =================== =========
@@ -972,117 +860,3 @@ environment.
 
 The ``spack env deactivate`` command will remove the default view of
 the environment from the user's path.
-
-
-.. _env-generate-depfile:
-
-
-------------------------------------------
-Generating Depfiles from Environments
-------------------------------------------
-
-Spack can generate ``Makefile``\s to make it easier to build multiple
-packages in an environment in parallel. Generated ``Makefile``\s expose
-targets that can be included in existing ``Makefile``\s, to allow
-other targets to depend on the environment installation.
-
-A typical workflow is as follows:
-
-.. code:: console
-
-   spack env create -d .
-   spack -e . add perl
-   spack -e . concretize
-   spack -e . env depfile -o Makefile
-   make -j64
-
-This generates a ``Makefile`` from a concretized environment in the
-current working directory, and ``make -j64`` installs the environment,
-exploiting parallelism across packages as much as possible. Spack
-respects the Make jobserver and forwards it to the build environment
-of packages, meaning that a single ``-j`` flag is enough to control the
-load, even when packages are built in parallel.
-
-By default the following phony convenience targets are available:
-
-- ``make all``: installs the environment (default target);
-- ``make clean``: cleans files used by make, but does not uninstall packages.
-
-.. tip::
-
-   GNU Make version 4.3 and above have great support for output synchronization
-   through the ``-O`` and ``--output-sync`` flags, which ensure that output is
-   printed orderly per package install. To get synchronized output with colors,
-   use ``make -j<N> SPACK_COLOR=always --output-sync=recurse``.
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Specifying dependencies on generated ``make`` targets
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-An interesting question is how to include generated ``Makefile``\s in your own
-``Makefile``\s. This comes up when you want to install an environment that provides
-executables required in a command for a make target of your own.
-
-The example below shows how to accomplish this: the ``env`` target specifies
-the generated ``spack/env`` target as a prerequisite, meaning that the environment
-gets installed and is available for use in the ``env`` target.
-
-.. code:: Makefile
-
-   SPACK ?= spack
-
-   .PHONY: all clean env
-
-   all: env
-
-   spack.lock: spack.yaml
-   	$(SPACK) -e . concretize -f
-
-   env.mk: spack.lock
-   	$(SPACK) -e . env depfile -o $@ --make-target-prefix spack
-
-   env: spack/env
-   	$(info Environment installed!)
-
-   clean:
-   	rm -rf spack.lock env.mk spack/
-
-   ifeq (,$(filter clean,$(MAKECMDGOALS)))
-   include env.mk
-   endif
-
-This works as follows: when ``make`` is invoked, it first "remakes" the missing
-include ``env.mk`` as there is a target for it. This triggers concretization of
-the environment and makes spack output ``env.mk``. At that point the
-generated target ``spack/env`` becomes available through ``include env.mk``.
-
-As it is typically undesirable to remake ``env.mk`` as part of ``make clean``,
-the include is conditional.
-
-.. note::
-
-   When including generated ``Makefile``\s, it is important to use
-   the ``--make-target-prefix`` flag and use the non-phony target
-   ``<target-prefix>/env`` as prerequisite, instead of the phony target
-   ``<target-prefix>/all``.
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Building a subset of the environment
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-The generated ``Makefile``\s contain install targets for each spec. Given the hash
-of a particular spec, you can use the ``.install/<hash>`` target to install the
-spec with its dependencies. There is also ``.install-deps/<hash>`` to *only* install
-its dependencies. This can be useful when certain flags should only apply to
-dependencies. Below we show a use case where a spec is installed with verbose
-output (``spack install --verbose``) while its dependencies are installed silently:
-
-.. code:: console
-
-   $ spack env depfile -o Makefile --make-target-prefix my_env
-
-   # Install dependencies in parallel, only show a log on error.
-   $ make -j16 my_env/.install-deps/<hash> SPACK_INSTALL_FLAGS=--show-log-on-error
-
-   # Install the root spec with verbose output.
-   $ make -j16 my_env/.install/<hash> SPACK_INSTALL_FLAGS=--verbose

lib/spack/docs/extensions.rst

@@ -1,4 +1,4 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
@@ -38,7 +38,8 @@ obtained by cloning the corresponding git repository:
 
 .. code-block:: console
 
-   $ cd ~/
+   $ pwd
+   /home/user
    $ mkdir tmp && cd tmp
    $ git clone https://github.com/alalazo/spack-scripting.git
    Cloning into 'spack-scripting'...
@@ -61,7 +62,7 @@ paths to ``config.yaml``. In the case of our example this means ensuring that:
 
    config:
      extensions:
-     - ~/tmp/spack-scripting
+     - /home/user/tmp/spack-scripting
 
 is part of your configuration file. Once this is setup any command that the extension provides
 will be available from the command line:

lib/spack/docs/features.rst

@@ -1,4 +1,4 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
@@ -98,42 +98,40 @@ For example, this command:
 
 .. code-block:: console
 
-   $ spack create https://ftp.osuosl.org/pub/blfs/conglomeration/libelf/libelf-0.8.13.tar.gz
+   $ spack create http://www.mr511.de/software/libelf-0.8.13.tar.gz
 
 creates a simple python file:
 
 .. code-block:: python
 
-   from spack.package import *
+   from spack import *
 
 
-   class Libelf(AutotoolsPackage):
+   class Libelf(Package):
        """FIXME: Put a proper description of your package here."""
 
        # FIXME: Add a proper url for your package's homepage here.
-       homepage = "https://www.example.com"
-       url = "https://ftp.osuosl.org/pub/blfs/conglomeration/libelf/libelf-0.8.13.tar.gz"
+       homepage = "http://www.example.com"
+       url      = "http://www.mr511.de/software/libelf-0.8.13.tar.gz"
 
-       # FIXME: Add a list of GitHub accounts to
-       # notify when the package is updated.
-       # maintainers = ["github_user1", "github_user2"]
-
-       version("0.8.13", sha256="591a9b4ec81c1f2042a97aa60564e0cb79d041c52faa7416acb38bc95bd2c76d")
+       version('0.8.13', '4136d7b4c04df68b686570afa26988ac')
 
        # FIXME: Add dependencies if required.
-       # depends_on("foo")
+       # depends_on('foo')
 
-       def configure_args(self):
-           # FIXME: Add arguments other than --prefix
-           # FIXME: If not needed delete this function
-           args = []
-           return args
+       def install(self, spec, prefix):
+           # FIXME: Modify the configure line to suit your build system here.
+           configure('--prefix={0}'.format(prefix))
+
+           # FIXME: Add logic to build and install here.
+           make()
+           make('install')
 
 It doesn't take much python coding to get from there to a working
 package:
 
 .. literalinclude:: _spack_root/var/spack/repos/builtin/packages/libelf/package.py
-   :lines: 5-
+   :lines: 6-
 
 Spack also provides wrapper functions around common commands like
 ``configure``, ``make``, and ``cmake`` to make writing packages

lib/spack/docs/getting_started.rst

@@ -1,4 +1,4 @@
-.. Copyright 2013-2022 Lawrence Livermore National Security, LLC and other
+.. Copyright 2013-2021 Lawrence Livermore National Security, LLC and other
    Spack Project Developers. See the top-level COPYRIGHT file for details.
 
    SPDX-License-Identifier: (Apache-2.0 OR MIT)
@@ -9,50 +9,27 @@
 Getting Started
 ===============
 
---------------------
-System Prerequisites
---------------------
+-------------
+Prerequisites
+-------------
 
-Spack has the following minimum system requirements, which are assumed to
-be present on the machine where Spack is run:
+Spack has the following minimum requirements, which must be installed
+before Spack is run:
 
-.. csv-table:: System prerequisites for Spack
-   :file: tables/system_prerequisites.csv
-   :header-rows: 1
+#. Python 2 (2.6 or 2.7) or 3 (3.5 - 3.9) to run Spack
+#. A C/C++ compiler for building
+#. The ``make`` executable for building
+#. The ``tar``, ``gzip``, ``unzip``, ``bzip2``, ``xz`` and optionally ``zstd``
+   executables for extracting source code
+#. The ``patch`` command to apply patches
+#. The ``git`` and ``curl`` commands for fetching
+#. If using the ``gpg`` subcommand, ``gnupg2`` is required
 
 These requirements can be easily installed on most modern Linux systems;
 on macOS, XCode is required.  Spack is designed to run on HPC
 platforms like Cray.  Not all packages should be expected
-to work on all platforms.
-
-A build matrix showing which packages are working on which systems is shown below.
-
-.. tab-set::
-
-   .. tab-item:: Debian/Ubuntu
-
-      .. code-block:: console
-
-         apt update
-         apt install build-essential ca-certificates coreutils curl environment-modules gfortran git gpg lsb-release python3 python3-distutils python3-venv unzip zip
-
-   .. tab-item:: RHEL
-
-      .. code-block:: console
-
-         yum update -y
-         yum install -y epel-release
-         yum update -y
-         yum --enablerepo epel groupinstall -y "Development Tools"
-         yum --enablerepo epel install -y curl findutils gcc-c++ gcc gcc-gfortran git gnupg2 hostname iproute redhat-lsb-core make patch python3 python3-pip python3-setuptools unzip
-         python3 -m pip install boto3
-
-   .. tab-item:: macOS Brew
-
-      .. code-block:: console
-
-         brew update
-         brew install curl gcc git gnupg zip
+to work on all platforms.  A build matrix showing which packages are
+working on which systems is planned but not yet available.
 
 ------------
 Installation
@@ -63,7 +40,7 @@ Getting Spack is easy.  You can clone it from the `github repository
 
 .. code-block:: console
 
-   $ git clone -c feature.manyFiles=true https://github.com/spack/spack.git
+   $ git clone https://github.com/spack/spack.git
 
 This will create a directory called ``spack``.
 
@@ -112,92 +89,6 @@ sourcing time, ensuring future invocations of the ``spack`` command will
 continue to use the same consistent python version regardless of changes in
 the environment.
 
-^^^^^^^^^^^^^^^^^^^^
-Bootstrapping clingo
-^^^^^^^^^^^^^^^^^^^^
-
-Spack uses ``clingo`` under the hood to resolve optimal versions and variants of
-dependencies when installing a package. Since ``clingo`` itself is a binary,
-Spack has to install it on initial use, which is called bootstrapping.
-
-Spack provides two ways of bootstrapping ``clingo``: from pre-built binaries
-(default), or from sources. The fastest way to get started is to bootstrap from
-pre-built binaries.
-
-The first time you concretize a spec, Spack will bootstrap automatically:
-
-.. code-block:: console
-
-   $ spack spec zlib
-   ==> Bootstrapping clingo from pre-built binaries
-   ==> Fetching https://mirror.spack.io/bootstrap/github-actions/v0.4/build_cache/linux-centos7-x86_64-gcc-10.2.1-clingo-bootstrap-spack-ba5ijauisd3uuixtmactc36vps7yfsrl.spec.json
-   ==> Fetching https://mirror.spack.io/bootstrap/github-actions/v0.4/build_cache/linux-centos7-x86_64/gcc-10.2.1/clingo-bootstrap-spack/linux-centos7-x86_64-gcc-10.2.1-clingo-bootstrap-spack-ba5ijauisd3uuixtmactc36vps7yfsrl.spack
-   ==> Installing "clingo-bootstrap@spack%gcc@10.2.1~docs~ipo+python+static_libstdcpp build_type=Release arch=linux-centos7-x86_64" from a buildcache
-   ==> Bootstrapping patchelf from pre-built binaries
-   ==> Fetching https://mirror.spack.io/bootstrap/github-actions/v0.4/build_cache/linux-centos7-x86_64-gcc-10.2.1-patchelf-0.16.1-p72zyan5wrzuabtmzq7isa5mzyh6ahdp.spec.json
-   ==> Fetching https://mirror.spack.io/bootstrap/github-actions/v0.4/build_cache/linux-centos7-x86_64/gcc-10.2.1/patchelf-0.16.1/linux-centos7-x86_64-gcc-10.2.1-patchelf-0.16.1-p72zyan5wrzuabtmzq7isa5mzyh6ahdp.spack
-   ==> Installing "patchelf@0.16.1%gcc@10.2.1 ldflags="-static-libstdc++ -static-libgcc"  build_system=autotools arch=linux-centos7-x86_64" from a buildcache
-   Input spec
-   --------------------------------
-   zlib
-
-   Concretized
-   --------------------------------
-   zlib@1.2.13%gcc@9.4.0+optimize+pic+shared build_system=makefile arch=linux-ubuntu20.04-icelake
-
-If for security concerns you cannot bootstrap ``clingo`` from pre-built
-binaries, you have to disable fetching the binaries we generated with Github Actions.
-
-.. code-block:: console
-
-   $ spack bootstrap disable github-actions-v0.4
-   ==> "github-actions-v0.4" is now disabled and will not be used for bootstrapping
-   $ spack bootstrap disable github-actions-v0.3
-   ==> "github-actions-v0.3" is now disabled and will not be used for bootstrapping
-
-You can verify that the new settings are effective with:
-
-.. command-output:: spack bootstrap list
-
-
-.. note::
-
-   When bootstrapping from sources, Spack requires a full install of Python
-   including header files (e.g. ``python3-dev`` on Debian), and a compiler
-   with support for C++14 (GCC on Linux, Apple Clang on macOS) and static C++
-   standard libraries on Linux.
-
-Spack will build the required software on the first request to concretize a spec:
-
-.. code-block:: console
-
-   $ spack spec zlib
-   [+] /usr (external bison-3.0.4-wu5pgjchxzemk5ya2l3ddqug2d7jv6eb)
-   [+] /usr (external cmake-3.19.4-a4kmcfzxxy45mzku4ipmj5kdiiz5a57b)
-   [+] /usr (external python-3.6.9-x4fou4iqqlh5ydwddx3pvfcwznfrqztv)
-   ==> Installing re2c-1.2.1-e3x6nxtk3ahgd63ykgy44mpuva6jhtdt
-   [ ... ]
-   zlib@1.2.11%gcc@10.1.0+optimize+pic+shared arch=linux-ubuntu18.04-broadwell
-
-"""""""""""""""""""
-The Bootstrap Store
-"""""""""""""""""""
-
-All the tools Spack needs for its own functioning are installed in a separate store, which lives
-under the ``${HOME}/.spack`` directory. The software installed there can be queried with:
-
-.. code-block:: console
-
-   $ spack -b find
-   -- linux-ubuntu18.04-x86_64 / gcc@10.1.0 ------------------------
-   clingo-bootstrap@spack  python@3.6.9  re2c@1.2.1
-
-In case it's needed the bootstrap store can also be cleaned with:
-
-.. code-block:: console
-
-   $ spack clean -b
-   ==> Removing bootstrapped software and configuration in "/home/spack/.spack/bootstrap"
 
 ^^^^^^^^^^^^^^^^^^
 Check Installation
@@ -226,6 +117,53 @@ environment*, especially for ``PATH``.  Only software that comes with
 the system, or that you know you wish to use with Spack, should be
 included.  This procedure will avoid many strange build errors.
 
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+Optional: Bootstrapping clingo
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Spack supports using clingo as an external solver to compute which software
+needs to be installed. If you have a default compiler supporting C++14 Spack
+can automatically bootstrap this tool from sources the first time it is
+needed:
+
+.. code-block:: console
+
+   $ spack solve zlib
+   [+] /usr (external bison-3.0.4-wu5pgjchxzemk5ya2l3ddqug2d7jv6eb)
+   [+] /usr (external cmake-3.19.4-a4kmcfzxxy45mzku4ipmj5kdiiz5a57b)
+   [+] /usr (external python-3.6.9-x4fou4iqqlh5ydwddx3pvfcwznfrqztv)
+   ==> Installing re2c-1.2.1-e3x6nxtk3ahgd63ykgy44mpuva6jhtdt
+   [ ... ]
+   ==> Optimization: [0, 0, 0, 0, 0, 1, 0, 0, 0]
+   zlib@1.2.11%gcc@10.1.0+optimize+pic+shared arch=linux-ubuntu18.04-broadwell
+
+If you want to speed-up bootstrapping, you may try to search for ``cmake`` and ``bison``
+on your system:
+
+.. code-block:: console
+
+   $ spack external find cmake bison
+   ==> The following specs have been detected on this system and added to /home/spack/.spack/packages.yaml
+   bison@3.0.4  cmake@3.19.4
+
+All the tools Spack needs for its own functioning are installed in a separate store, which lives
+under the ``${HOME}/.spack`` directory. The software installed there can be queried with:
+
+.. code-block:: console
+
+   $ spack find --bootstrap
+   ==> Showing internal bootstrap store at "/home/spack/.spack/bootstrap/store"
+   ==> 3 installed packages
+   -- linux-ubuntu18.04-x86_64 / gcc@10.1.0 ------------------------
+   clingo-bootstrap@spack  python@3.6.9  re2c@1.2.1
+
+In case it's needed the bootstrap store can also be cleaned with:
+
+.. code-block:: console
+
+   $ spack clean -b
+   ==> Removing software in "/home/spack/.spack/bootstrap/store"
+
 ^^^^^^^^^^^^^^^^^^^^^^^^^^
 Optional: Alternate Prefix
 ^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -251,10 +189,9 @@ Compiler configuration
 ----------------------
 
 Spack has the ability to build packages with multiple compilers and
-compiler versions. Compilers can be made available to Spack by
-specifying them manually in ``compilers.yaml``, or automatically by
-running ``spack compiler find``, but for convenience Spack will
-automatically detect compilers the first time it needs them.
+compiler versions. Spack searches for compilers on your machine
+automatically the first time it is run. It does this by inspecting
+your ``PATH``.
 
 .. _cmd-spack-compilers:
 
@@ -262,7 +199,7 @@ automatically detect compilers the first time it needs them.
 ``spack compilers``
 ^^^^^^^^^^^^^^^^^^^
 
-You can see which compilers are available to Spack by running ``spack
+You can see which compilers spack has found by running ``spack
 compilers`` or ``spack compiler list``:
 
 .. code-block:: console
@@ -301,10 +238,9 @@ An alias for ``spack compiler find``.
 ``spack compiler find``
 ^^^^^^^^^^^^^^^^^^^^^^^
 
-Lists the compilers currently available to Spack. If you do not see
-a compiler in this list, but you want to use it with Spack, you can
-simply run ``spack compiler find`` with the path to where the
-compiler is installed.  For example:
+If you do not see a compiler in this list, but you want to use it with
+Spack, you can simply run ``spack compiler find`` with the path to
+where the compiler is installed.  For example:
 
 .. code-block:: console
 
@@ -431,34 +367,6 @@ then inject those flags into the compiler command. Compiler flags
 entered from the command line will be discussed in more detail in the
 following section.
 
-Some compilers also require additional environment configuration.
-Examples include Intels oneAPI and AMDs AOCC compiler suites,
-which have custom scripts for loading environment variables and setting paths.
-These variables should be specified in the ``environment`` section of the compiler
-specification. The operations available to modify the environment are ``set``, ``unset``,
-``prepend_path``, ``append_path``, and ``remove_path``. For example:
-
-.. code-block:: yaml
-
-   compilers:
-   - compiler:
-       modules: []
-       operating_system: centos6
-       paths:
-         cc: /opt/intel/oneapi/compiler/latest/linux/bin/icx
-         cxx: /opt/intel/oneapi/compiler/latest/linux/bin/icpx
-         f77: /opt/intel/oneapi/compiler/latest/linux/bin/ifx
-         fc: /opt/intel/oneapi/compiler/latest/linux/bin/ifx
-       spec: oneapi@latest
-       environment:
-         set:
-           MKL_ROOT: "/path/to/mkl/root"
-         unset: # A list of environment variables to unset
-           - CC
-         prepend_path: # Similar for append|remove_path
-           LD_LIBRARY_PATH: /ld/paths/added/by/setvars/sh
-
-
 ^^^^^^^^^^^^^^^^^^^^^^^
 Build Your Own Compiler
 ^^^^^^^^^^^^^^^^^^^^^^^
@@ -613,9 +521,8 @@ Fortran.
 #. Run ``spack compiler find`` to locate Clang.
 
 #. There are different ways to get ``gfortran`` on macOS. For example, you can
-   install GCC with Spack (``spack install gcc``), with Homebrew (``brew install
-   gcc``), or from a `DMG installer
-   <https://github.com/fxcoudert/gfortran-for-macOS/releases>`_.
+   install GCC with Spack (``spack install gcc``) or with Homebrew
+   (``brew install gcc``).
 
 #. The only thing left to do is to edit ``~/.spack/darwin/compilers.yaml`` to provide
    the path to ``gfortran``:
@@ -636,8 +543,7 @@ Fortran.
    If you used Spack to install GCC, you can get the installation prefix by
    ``spack location -i gcc`` (this will only work if you have a single version
    of GCC installed). Whereas for Homebrew, GCC is installed in
-   ``/usr/local/Cellar/gcc/x.y.z``. With the DMG installer, the correct path
-   will be ``/usr/local/gfortran``.
+   ``/usr/local/Cellar/gcc/x.y.z``.
 
 ^^^^^^^^^^^^^^^^^^^^^
 Compiler Verification
@@ -871,7 +777,7 @@ an OpenMPI installed in /opt/local, one would use:
             buildable: False
 
 In general, Spack is easier to use and more reliable if it builds all of
-its own dependencies.  However, there are several packages for which one
+its own dependencies.  However, there are two packages for which one
 commonly needs to use system versions:
 
 ^^^
@@ -1496,238 +1402,3 @@ To ensure that Spack does not autodetect the Cray programming
 environment, unset the environment variable ``MODULEPATH``. This
 will cause Spack to treat a linux container on a Cray system as a base
 linux distro.
-
-.. _windows_support:
-
-----------------
-Spack On Windows
-----------------
-
-Windows support for Spack is currently under development. While this work is still in an early stage,
-it is currently possible to set up Spack and perform a few operations on Windows.  This section will guide
-you through the steps needed to install Spack and start running it on a fresh Windows machine. 
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Step 1: Install prerequisites
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-To use Spack on Windows, you will need the following packages:
-
-Required:
-* Microsoft Visual Studio
-* Python 
-* Git
-
-Optional:
-* Intel Fortran (needed for some packages)
-
-.. note::
-
-  Currently MSVC is the only compiler tested for C/C++ projects. Intel OneAPI provides Fortran support.
-
-"""""""""""""""""""""""
-Microsoft Visual Studio
-"""""""""""""""""""""""
-
-Microsoft Visual Studio provides the only Windows C/C++ compiler that is currently supported by Spack.
-
-We require several specific components to be included in the Visual Studio installation.
-One is the C/C++ toolset, which can be selected as "Desktop development with C++" or "C++ build tools,"
-depending on installation type (Professional, Build Tools, etc.)  The other required component is
-"C++ CMake tools for Windows," which can be selected from among the optional packages.
-This provides CMake and Ninja for use during Spack configuration.
-
-If you already have Visual Studio installed, you can make sure these components are installed by
-rerunning the installer.  Next to your installation, select "Modify" and look at the
-"Installation details" pane on the right.
-
-"""""""""""""
-Intel Fortran
-"""""""""""""
-
-For Fortran-based packages on Windows, we strongly recommend Intel's oneAPI Fortran compilers.
-The suite is free to download from Intel's website, located at 
-https://software.intel.com/content/www/us/en/develop/tools/oneapi/components/fortran-compiler.html#gs.70t5tw.
-The executable of choice for Spack will be Intel's Beta Compiler, ifx, which supports the classic
-compiler's (ifort's) frontend and runtime libraries by using LLVM.
-
-""""""
-Python
-""""""
-
-As Spack is a Python-based package, an installation of Python will be needed to run it.
-Python 3 can be downloaded and installed from the Windows Store, and will be automatically added
-to your ``PATH`` in this case.
-
-.. note::
-   Spack currently supports Python versions later than 3.2 inclusive.
-
-"""
-Git
-"""
-
-A bash console and GUI can be downloaded from https://git-scm.com/downloads.
-If you are unfamiliar with Git, there are a myriad of resources online to help
-guide you through checking out repositories and switching development branches.
-
-When given the option of adjusting your ``PATH``, choose the ``Git from the
-command line and also from 3rd-party software`` option. This will automatically
-update your ``PATH`` variable to include the ``git`` command.
-
-Spack support on Windows is currently dependent on installing the Git for Windows project
-as the project providing Git support on Windows. This is additionally the recommended method
-for installing Git on Windows, a link to which can be found above. Spack requires the
-utilities vendored by this project.
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Step 2: Install and setup Spack
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-We are now ready to get the Spack environment set up on our machine. We
-begin by using Git to clone the Spack repo, hosted at https://github.com/spack/spack.git
-into a desired directory, for our purposes today, called ``spack_install``.
-
-In order to install Spack with Windows support, run the following one liner
-in a Windows CMD prompt.
-
-.. code-block:: console
-
-   git clone https://github.com/spack/spack.git
-
-.. note::
-   If you chose to install Spack into a directory on Windows that is set up to require Administrative
-   Privleges, Spack will require elevated privleges to run.
-   Administrative Privleges can be denoted either by default such as
-   ``C:\Program Files``, or aministrator applied administrative restrictions
-   on a directory that spack installs files to such as ``C:\Users``
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Step 3: Run and configure Spack
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-To use Spack, run ``bin\spack_cmd.bat`` (you may need to Run as Administrator) from the top-level spack
-directory. This will provide a Windows command prompt with an environment properly set up with Spack
-and its prerequisites. If you receive a warning message that Python is not in your ``PATH``
-(which may happen if you installed Python from the website and not the Windows Store) add the location
-of the Python executable to your ``PATH`` now. You can permanently add Python to your ``PATH`` variable
-by using the ``Edit the system environment variables`` utility in Windows Control Panel.
-
-.. note::
-   Alternatively, Powershell can be used in place of CMD
-
-To configure Spack, first run the following command inside the Spack console:
-
-.. code-block:: console
-
-   spack compiler find
-
-This creates a ``.staging`` directory in our Spack prefix, along with a ``windows`` subdirectory
-containing a ``compilers.yaml`` file. On a fresh Windows install with the above packages
-installed, this command should only detect Microsoft Visual Studio and the Intel Fortran
-compiler will be integrated within the first version of MSVC present in the ``compilers.yaml``
-output.
-
-Spack provides a default ``config.yaml`` file for Windows that it will use unless overridden.
-This file is located at ``etc\spack\defaults\windows\config.yaml``. You can read more on how to
-do this and write your own configuration files in the :ref:`Configuration Files<configuration>` section of our
-documentation. If you do this, pay particular attention to the ``build_stage`` block of the file
-as this specifies the directory that will temporarily hold the source code for the packages to
-be installed. This path name must be sufficiently short for compliance with cmd, otherwise you
-will see build errors during installation (particularly with CMake) tied to long path names.
-
-To allow Spack use of external tools and dependencies already on your system, the
-external pieces of software must be described in the ``packages.yaml`` file.
-There are two methods to populate this file:
-
-The first and easiest choice is to use Spack to find installation on your system. In
-the Spack terminal, run the following commands:
-
-.. code-block:: console
-
-   spack external find cmake
-   spack external find ninja
-
-The ``spack external find <name>`` will find executables on your system
-with the same name given. The command will store the items found in
-``packages.yaml`` in the ``.staging\`` directory.
-
-Assuming that the command found CMake and Ninja executables in the previous
-step, continue to Step 4. If no executables were found, we may need to manually direct spack towards the CMake
-and Ninja installations we set up with Visual Studio. Therefore, your ``packages.yaml`` file will look something
-like this, with possibly slight variants in the paths to CMake and Ninja:
-
-.. code-block:: yaml
-
-   packages:
-     cmake:
-       externals:
-       - spec: cmake@3.19
-         prefix: 'c:\Program Files (x86)\Microsoft Visual Studio\2019\Professional\Common7\IDE\CommonExtensions\Microsoft\CMake\CMake'
-       buildable: False
-     ninja:
-       externals:
-       - spec: ninja@1.8.2
-         prefix: 'c:\Program Files (x86)\Microsoft Visual Studio\2019\Professional\Common7\IDE\CommonExtensions\Microsoft\CMake\Ninja'
-       buildable: False
-
-You can also use an separate installation of CMake if you have one and prefer
-to use it. If you don't have a path to Ninja analogous to the above, then you can
-obtain it by running the Visual Studio Installer and following the instructions
-at the start of this section. Also note that .yaml files use spaces for indentation
-and not tabs, so ensure that this is the case when editing one directly.
-
-
-.. note:: Cygwin
-   The use of Cygwin is not officially supported by Spack and is not tested.
-   However Spack will not throw an error, so use if choosing to use Spack
-   with Cygwin, know that no functionality is garunteed.
-
-^^^^^^^^^^^^^^^^^
-Step 4: Use Spack
-^^^^^^^^^^^^^^^^^
-
-Once the configuration is complete, it is time to give the installation a test.  Install a basic package though the
-Spack console via:
-
-.. code-block:: console
-
-   spack install cpuinfo
-
-If in the previous step, you did not have CMake or Ninja installed, running the command above should boostrap both packages
-
-"""""""""""""""""""""""""""
-Windows Compatible Packages
-"""""""""""""""""""""""""""
-
-Many Spack packages are not currently compatible with Windows, due to Unix
-dependencies or incompatible build tools like autoconf. Here are several
-packages known to work on Windows:
-
-* abseil-cpp
-* clingo
-* cpuinfo
-* cmake
-* glm
-* nasm
-* netlib-lapack (requires Intel Fortran)
-* ninja
-* openssl
-* perl
-* python
-* ruby
-* wrf
-* zlib
-
-.. note::
-   This is by no means a comprehensive list
-
-^^^^^^^^^^^^^^
-For developers
-^^^^^^^^^^^^^^
-
-The intent is to provide a Windows installer that will automatically set up
-Python, Git, and Spack, instead of requiring the user to do so manually.
-Instructions for creating the installer are at
-https://github.com/spack/spack/blob/develop/lib/spack/spack/cmd/installer/README.md
-
-Alternatively a pre-built copy of the Windows installer is available as an artifact of Spack's Windows CI