Sync with main

updates required Python version to exclude 3.6

.github/workflows/integration-test.yaml

@@ -58,36 +58,28 @@ jobs:
           echo $matrix_post_filter | jq -C '.'
         env:
           matrix_include_pre_filter: |
-            - name: "Int. tests: Ubuntu 18.04, Py 3.6"
+            - name: "Int. tests: Debian 11, Py 3.9"
-              ubuntu_version: "18.04"
+              distro_image: "debian:11"
-              python_version: "3.6"
+              runs_on: "ubuntu-22.04"
               extra_flags: ""
-            - name: "Int. tests: Ubuntu 20.04, Py 3.9"
+            - name: "Int. tests: Ubuntu 20.04, Py 3.8"
-              ubuntu_version: "20.04"
+              distro_image: "ubuntu:20.04"
-              python_version: "3.9"
               extra_flags: ""
-            - name: "Int. tests: Ubuntu 22.04, Py 3.10"
+            - name: "Int. tests: Ubuntu 22.04 Py 3.10"
-              ubuntu_version: "22.04"
+              distro_image: "ubuntu:22.04"
-              python_version: "3.10"
               extra_flags: ""
             - name: "Int. tests: Ubuntu 22.04, Py 3.10, --upgrade"
-              ubuntu_version: "22.04"
+              distro_image: "ubuntu:22.04"
-              python_version: "3.10"
               extra_flags: --upgrade
               dont_run_on_ref: refs/heads/master
 
   integration-tests:
     needs: decide-on-test-jobs-to-run
 
-    # runs-on can only be configured to the LTS releases of ubuntu (20.04,
+    # integration tests run in a container,
-    # 22.04, ...), so if we want to test against the latest non-LTS release, we
+    # not in the worker, so this version is not relevant to the tests
-    # must compromise when configuring runs-on and configure runs-on to be the
+    # and can be the same for all tested versions
-    # latest LTS release instead.
+    runs-on: ubuntu-22.04
-    #
-    # This can have consequences because actions like actions/setup-python will
-    # mount cached installations associated with the chosen runs-on environment.
-    #
-    runs-on: ${{ format('ubuntu-{0}', matrix.runs_on || matrix.ubuntu_version) }}
 
     name: ${{ matrix.name }}
     strategy:
@@ -98,7 +90,7 @@ jobs:
       - uses: actions/checkout@v3
       - uses: actions/setup-python@v4
         with:
-          python-version: "${{ matrix.python_version }}"
+          python-version: "3.10"
 
       - name: Install pytest
         run: python3 -m pip install pytest
@@ -106,7 +98,7 @@ jobs:
       # We abort pytest after two failures as a compromise between wanting to
       # avoid a flood of logs while still understanding if multiple tests would
       # fail.
-      - name: Run bootstrap tests (Runs in/Builds ubuntu:${{ matrix.ubuntu_version }} derived image)
+      - name: Run bootstrap tests (Runs in/Builds ${{ matrix.distro_image }} derived image)
         run: |
           pytest --verbose --maxfail=2 --color=yes --durations=10 --capture=no \
               integration-tests/test_bootstrap.py
@@ -115,14 +107,14 @@ jobs:
           # integration-tests/test_bootstrap.py will build and start containers
           # based on this environment variable. This is similar to how
           # .github/integration-test.py build-image can take a --build-arg
-          # setting the ubuntu_version.
+          # setting the base image.
-          UBUNTU_VERSION: ${{ matrix.ubuntu_version }}
+          BASE_IMAGE: ${{ matrix.distro_image }}
 
       # We build a docker image from wherein we will work
-      - name: Build systemd image (Builds ubuntu:${{ matrix.ubuntu_version }} derived image)
+      - name: Build systemd image (Builds ${{ matrix.distro_image }} derived image)
         run: |
           .github/integration-test.py build-image \
-              --build-arg "ubuntu_version=${{ matrix.ubuntu_version }}"
+              --build-arg "BASE_IMAGE=${{ matrix.distro_image }}"
 
       # FIXME: Make the logic below easier to follow.
       # - In short, setting BOOTSTRAP_PIP_SPEC here, specifies from what
@@ -151,7 +143,7 @@ jobs:
           echo "BOOTSTRAP_PIP_SPEC=$BOOTSTRAP_PIP_SPEC" >> $GITHUB_ENV
           echo $BOOTSTRAP_PIP_SPEC
 
-      - name: Run basic tests (Runs in ubuntu:${{ matrix.ubuntu_version }} derived image)
+      - name: Run basic tests (Runs in ${{ matrix.distro_image }} derived image)
         run: |
           .github/integration-test.py run-test basic-tests \
               --bootstrap-pip-spec "$BOOTSTRAP_PIP_SPEC" \
@@ -162,7 +154,7 @@ jobs:
               test_extensions.py
         timeout-minutes: 15
 
-      - name: Run admin tests (Runs in ubuntu:${{ matrix.ubuntu_version }} derived image)
+      - name: Run admin tests (Runs in ${{ matrix.distro_image }} derived image)
         run: |
           .github/integration-test.py run-test admin-tests \
               --installer-args "--admin admin:admin" \
@@ -171,7 +163,7 @@ jobs:
               test_admin_installer.py
         timeout-minutes: 15
 
-      - name: Run plugin tests (Runs in ubuntu:${{ matrix.ubuntu_version }} derived image)
+      - name: Run plugin tests (Runs in ${{ matrix.distro_image }} derived image)
         run: |
           .github/integration-test.py run-test plugin-tests \
               --bootstrap-pip-spec "$BOOTSTRAP_PIP_SPEC" \

.github/workflows/unit-test.yaml

@@ -42,9 +42,6 @@ jobs:
       fail-fast: false
       matrix:
         include:
-          - name: "Unit tests: Ubuntu 18.04, Py 3.6"
-            ubuntu_version: "18.04"
-            python_version: "3.6"
           - name: "Unit tests: Ubuntu 20.04, Py 3.9"
             ubuntu_version: "20.04"
             python_version: "3.9"

README.md

@@ -36,7 +36,7 @@ might still make breaking changes that have no clear upgrade pathway.
 ## Installation
 
 The Littlest JupyterHub (TLJH) can run on any server that is running at least
-**Ubuntu 18.04**. Earlier versions of Ubuntu are not supported.
+**Ubuntu 20.04**. Earlier versions of Ubuntu are not supported.
 We have several tutorials to get you started.
 
 - Tutorials to create a new server from scratch on a cloud provider & run TLJH

bootstrap/bootstrap.py

@@ -9,11 +9,10 @@ This script is run as:
 
 Constraints:
 
-    - The entire script should be compatible with Python 3.6, which is the on
+    - The entire script should be compatible with Python 3.8, which is the default on
-      Ubuntu 18.04+.
+      Ubuntu 20.04.
-    - The script should parse in Python 3.5 as we print error messages for using
+    - The script should parse in Python 3.6 as we print error messages for using
-      Ubuntu 16.04+ which comes with Python 3.5 by default. This means no
+      Ubuntu 18.04 which comes with Python 3.6 by default.
-      f-strings can be used.
     - The script must depend only on stdlib modules, as no previous installation
       of dependencies can be assumed.
 
@@ -132,6 +131,12 @@ progress_page_html = """
 
 logger = logging.getLogger(__name__)
 
+
+def _parse_version(vs):
+    """Parse a simple version into a tuple of ints"""
+    return tuple(int(part) for part in vs.split("."))
+
+
 # This function is needed both by the process starting this script, and by the
 # TLJH installer that this script execs in the end. Make sure its replica at
 # tljh/utils.py stays in sync with this version!
@@ -199,22 +204,22 @@ def ensure_host_system_can_install_tljh():
             .strip()
         )
 
-    # Require Ubuntu 18.04+ or Debian 10+
+    # Require Ubuntu 20.04+ or Debian 11+
     distro = get_os_release_variable("ID")
-    version = float(get_os_release_variable("VERSION_ID"))
+    version = get_os_release_variable("VERSION_ID")
     if distro not in ["ubuntu", "debian"]:
         print("The Littlest JupyterHub currently supports Ubuntu or Debian Linux only")
         sys.exit(1)
-    elif distro == "ubuntu" and float(version) < 18.04:
+    elif distro == "ubuntu" and _parse_version(version) < (20, 4):
-        print("The Littlest JupyterHub requires Ubuntu 18.04 or higher")
+        print("The Littlest JupyterHub requires Ubuntu 20.04 or higher")
         sys.exit(1)
-    elif distro == "debian" and float(version) < 10:
+    elif distro == "debian" and _parse_version(version) < (11,):
-        print("The Littlest JupyterHub requires Debian 10 or higher")
+        print("The Littlest JupyterHub requires Debian 11 or higher")
         sys.exit(1)
 
-    # Require Python 3.6+
+    # Require Python 3.8+
-    if sys.version_info < (3, 6):
+    if sys.version_info < (3, 8):
-        print("bootstrap.py must be run with at least Python 3.6")
+        print(f"bootstrap.py must be run with at least Python 3.8, found {sys.version}")
         sys.exit(1)
 
     # Require systemd (systemctl is a part of systemd)

docs/howto/env/user-environment.rst

@@ -170,7 +170,7 @@ To upgrade the Python version of the user environment, one can:
 
 *  **Upgrade Python manually.**
 
-   Because upgrading Python for existing installs can break packages alaredy installed
+   Because upgrading Python for existing installs can break packages already installed
    under the old Python, upgrading your current TLJH installation, will NOT upgrade
    the Python version of the user environment, but you may do so manually.
 

docs/index.rst

@@ -17,7 +17,10 @@ might still make breaking changes that have no clear upgrade pathway.
 Installation
 ============
 
-The Littlest JupyterHub (TLJH) can run on any server that is running **Ubuntu 18.04** or **Ubuntu 20.04** on a amd64 or arm64 CPU architecture. Earlier versions of Ubuntu are not supported.
+The Littlest JupyterHub (TLJH) can run on any server that is running **Debian 11** or **Ubuntu 20.04** or **22.04** on an amd64 or arm64 CPU architecture.
+We aim to support 'stable' and Long-Term Support (LTS) versions.
+Newer versions are likely to work with little or no adjustment, but these are not officially supported or tested.
+Earlier versions of Ubuntu and Debian are not supported, nor are other Linux distributions.
 We have a bunch of tutorials to get you started.
 
 - Tutorials to create a new server from scratch on a cloud provider & run TLJH

docs/install/amazon.rst

@@ -58,15 +58,15 @@ Let's create the server on which we can run JupyterHub.
 #. On the page **Step 1: Choose an Amazon Machine Image (AMI)** you are going
    to pick the base image your remote server will have. The view will
    default to the 'Quick-start' tab selected and just a few down the page, select
-   **Ubuntu Server 18.04 LTS (HVM), SSD Volume Type - ami-XXXXXXXXXXXXXXXXX**,
+   **Ubuntu Server 22.04 LTS (HVM), SSD Volume Type - ami-XXXXXXXXXXXXXXXXX**,
    leaving `64-bit (x86)` toggled.
 
    .. image:: ../images/providers/amazon/select_ubuntu_18.png
-      :alt: Click Ubuntu server 18.04
+      :alt: Click Ubuntu server 22.04
 
    The `ami` alpha-numeric at the end references the specific Amazon machine
    image, ignore this as Amazon updates them routinely. The
-   **Ubuntu Server 18.04 LTS (HVM)** is the important part.
+   **Ubuntu Server 22.04 LTS (HVM)** is the important part.
 
 
 #. After selecting the AMI, you'll be at **Step 2: Choose an Instance Type**.

docs/install/azure.rst

@@ -52,7 +52,7 @@ A new screen with all the options for Virtual Machines in Azure will displayed.
         :alt: Create VM from the marketplace
 
 #. **Choose an Ubuntu server for your VM**:
-    * Click `Ubuntu Server 18.04 LTS.`
+    * Click `Ubuntu Server 22.04 LTS.`
     * Make sure `Resource Manager` is selected in the next screen and click **Create**
 
     .. image:: ../images/providers/azure/ubuntu-vm.png
@@ -70,7 +70,7 @@ A new screen with all the options for Virtual Machines in Azure will displayed.
     * **Name**. Use a descriptive name for your virtual machine (note that you cannot use spaces or special characters).
     * **Region**. Choose a location near where you expect your users to be located.
     * **Availability options**. Choose "No infrastructure redundancy required".
-    * **Image**. Make sure "Ubuntu Server 18.04 LTS" is selected (from the previous step).
+    * **Image**. Make sure "Ubuntu Server 22.04 LTS" is selected (from the previous step).
     * **Authentication type**. Change authentication type to "password".
     * **Username**. Choose a memorable username, this will be your "root" user, and you'll need it later on.
     * **Password**. Type in a password, this will be used later for admin access so make sure it is something memorable.

docs/install/custom-server.rst

@@ -31,7 +31,7 @@ Pre-requisites
 ==============
 
 #. Some familiarity with the command line.
-#. A server running Ubuntu 18.04 where you have root access.
+#. A server running Ubuntu 20.04+ where you have root access (Ubuntu 22.04 LTS recommended).
 #. At least **1GB** of RAM on your server.
 #. Ability to ``ssh`` into the server & run commands from the prompt.
 #. An **IP address** where the server can be reached from the browsers of your target audience.

docs/install/digitalocean.rst

@@ -34,10 +34,10 @@ Let's create the server on which we can run JupyterHub.
    This takes you to a page titled **Create Droplets** that lets you configure
    your server.
 
-#. Under **Choose an image**, select **18.04 x64** under **Ubuntu**.
+#. Under **Choose an image**, select **22.04 x64** under **Ubuntu**.
 
    .. image:: ../images/providers/digitalocean/select-image.png
-      :alt: Select 18.04 x64 image under Ubuntu
+      :alt: Select 22.04 x64 image under Ubuntu
 
 #. Under **Choose a size**, select the size of the server you want. The default
    (4GB RAM, 2CPUs, 20 USD / month) is not a bad start. You can resize your server

docs/install/google.rst

@@ -94,10 +94,10 @@ Let's create the server on which we can run JupyterHub.
 
    This should open a **Boot disk** popup.
 
-#. Select **Ubuntu 18.04 LTS** from the list of operating system images.
+#. Select **Ubuntu 22.04 LTS** from the list of operating system images.
 
    .. image:: ../images/providers/google/boot-disk-ubuntu.png
-      :alt: Selecting Ubuntu 18.04 for OS
+      :alt: Selecting Ubuntu 22.04 for OS
 
 #. You can also change the **type** and **size** of your disk at the bottom
    of this popup.

docs/install/index.rst

@@ -4,8 +4,8 @@
 Installing
 ==========
 
-The Littlest JupyterHub (TLJH) can run on any server that is running at least
+The Littlest JupyterHub (TLJH) can run on any server that is running **Debian 11** or **Ubuntu 20.04** or **22.04** on a amd64 or arm64 CPU architecture.
-**Ubuntu 18.04**. Earlier versions of Ubuntu are not supported.
+Earlier versions of Ubuntu and Debian are not supported, nor are other Linux distributions.
 We have a bunch of tutorials to get you started.
 
 Tutorials to create a new server from scratch on a cloud provider & run TLJH

docs/install/jetstream.rst

@@ -33,11 +33,11 @@ Let's create the server on which we can run JupyterHub.
    This takes you to a page with a list of base images you can choose for your
    server.
 
-#. Under **Image Search**, search for **Ubuntu 18.04**, and select the
+#. Under **Image Search**, search for **Ubuntu 22.04**, and select the
-   **Ubuntu 18.04 Devel and Docker** image.
+   **Ubuntu 22.04 Devel and Docker** image.
 
    .. image:: ../images/providers/jetstream/select-image.png
-      :alt: Select Ubuntu 18.04 x64 image from image list
+      :alt: Select Ubuntu 22.04 x64 image from image list
 
 #. Once selected, you will see more information about this image. Click the
    **Launch** button on the top right.

docs/install/ovh.rst

@@ -52,10 +52,10 @@ Let's create the server on which we can run JupyterHub.
 
 #. **Select a region**.
 
-#. Select **Ubuntu 18.04** as the image:
+#. Select **Ubuntu 22.04** as the image:
 
    .. image:: ../images/providers/ovh/distribution.png
-      :alt: Select Ubuntu 18.04 as the image
+      :alt: Select Ubuntu 22.04 as the image
 
 #. OVH requires setting an SSH key to be able to connect to the instance.
    You can create a new SSH by following

docs/topic/requirements.rst

@@ -7,7 +7,7 @@ Server Requirements
 Operating System
 ================
 
-We require using Ubuntu 18.04 as the base operating system for your server.
+We require using Ubuntu >=20.04 as the base operating system for your server.
 
 Root access
 ===========

integration-tests/Dockerfile

@@ -1,6 +1,6 @@
 # Systemd inside a Docker container, for CI only
-ARG ubuntu_version=20.04
+ARG BASE_IMAGE=ubuntu:20.04
-FROM ubuntu:${ubuntu_version}
+FROM $BASE_IMAGE
 
 # DEBIAN_FRONTEND is set to avoid being asked for input and hang during build:
 # https://anonoz.github.io/tech/2020/04/24/docker-build-stuck-tzdata.html
@@ -11,6 +11,7 @@ RUN export DEBIAN_FRONTEND=noninteractive \
         curl \
         git \
         sudo \
+        python3 \
  && rm -rf /var/lib/apt/lists/*
 
 # Kill all the things we don't need

integration-tests/test_bootstrap.py

@@ -6,6 +6,8 @@ import os
 import subprocess
 import time
 
+BASE_IMAGE = os.getenv("BASE_IMAGE", "ubuntu:20.04")
+
 
 def install_pkgs(container_name, show_progress_page):
     # Install python3 inside the ubuntu container
@@ -13,7 +15,7 @@ def install_pkgs(container_name, show_progress_page):
     pkgs = ["python3"]
     if show_progress_page:
         pkgs += ["systemd", "git", "curl"]
-        # Create the sudoers dir, so that the installer succesfully gets to the
+        # Create the sudoers dir, so that the installer successfully gets to the
         # point of starting jupyterhub and stopping the progress page server.
         subprocess.check_output(
             ["docker", "exec", container_name, "mkdir", "-p", "etc/sudoers.d"]
@@ -128,15 +130,15 @@ def test_ubuntu_too_old():
     """
     Error with a useful message when running in older Ubuntu
     """
-    output = run_bootstrap_after_preparing_container("old-distro-test", "ubuntu:16.04")
+    output = run_bootstrap_after_preparing_container("old-distro-test", "ubuntu:18.04")
-    assert output.stdout == "The Littlest JupyterHub requires Ubuntu 18.04 or higher\n"
+    assert output.stdout == "The Littlest JupyterHub requires Ubuntu 20.04 or higher\n"
     assert output.returncode == 1
 
 
 def test_inside_no_systemd_docker():
     output = run_bootstrap_after_preparing_container(
         "plain-docker-test",
-        f"ubuntu:{os.getenv('UBUNTU_VERSION', '20.04')}",
+        BASE_IMAGE,
     )
     assert "Systemd is required to run TLJH" in output.stdout
     assert output.returncode == 1
@@ -172,7 +174,7 @@ def test_progress_page():
         installer = executor.submit(
             run_bootstrap_after_preparing_container,
             "progress-page",
-            f"ubuntu:{os.getenv('UBUNTU_VERSION', '20.04')}",
+            BASE_IMAGE,
             True,
         )
 

setup.py

@@ -2,7 +2,7 @@ from setuptools import setup, find_packages
 
 setup(
     name="the-littlest-jupyterhub",
-    version="0.2.0",
+    version="1.0.0.dev0",
     description="A small JupyterHub distribution",
     url="https://github.com/jupyterhub/the-littlest-jupyterhub",
     author="Jupyter Development Team",